MIB Viewer

FCFABRIC-ELEMENT-MIB

167 objects
No module-level DESCRIPTION found.
Imported Objects
RFC1155-SMICounter experimental Gauge OBJECT-TYPE TimeTicks
OIDNameAccessStatusDescription
1.3.6.1.3.42NodefibreChannel
1.3.6.1.3.42.2NodefcFabric
1.3.6.1.3.42.2.1NodefcFe
1.3.6.1.3.42.2.1.1NodefcFeConfig
1.3.6.1.3.42.2.1.1.1ScalarfcFabricNameread-onlymandatoryThe Name_Identifier of the Fabric to which this Fabric Element belongs.
1.3.6.1.3.42.2.1.1.2ScalarfcElementNameread-onlymandatoryThe Name_Identifier of the Fabric Element.
1.3.6.1.3.42.2.1.1.3ScalarfcFeModuleCapacityread-onlymandatoryThe maximum number of modules in the Fabric Element, regardless of their current state.
1.3.6.1.3.42.2.1.1.4TablefcFeModuleTablenot-accessiblemandatoryA table that contains, one entry for each module in the Fabric Element, information of the modules.
1.3.6.1.3.42.2.1.1.4.1RowfcFeModuleEntrynot-accessiblemandatoryAn entry containing the configuration parameters of a module.
1.3.6.1.3.42.2.1.1.4.1.1ColumnfcFeModuleIndexread-onlymandatoryThis object identifies the module within the Fabric Element for which this entry contains information. This value is never greater than fcFeModuleCapacity.
1.3.6.1.3.42.2.1.1.4.1.2ColumnfcFeModuleDescrread-onlymandatoryA textual description of the module. This value should include the full name and version identification of the module. It should contain printable ASCII charac…
1.3.6.1.3.42.2.1.1.4.1.3ColumnfcFeModuleObjectIDread-onlymandatoryThe vendor's authoritative identification of the module. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-f…
1.3.6.1.3.42.2.1.1.4.1.4ColumnfcFeModuleOperStatusread-onlymandatoryThis object indicates the operational status of the module: online(1) the module is functioning properly; offline(2) the module is not available; testing(3) th…
1.3.6.1.3.42.2.1.1.4.1.5ColumnfcFeModuleLastChangeread-onlymandatoryThis object contains the value of sysUpTime when the module entered its current operational status. A value of zero indicates that the operational status of th…
1.3.6.1.3.42.2.1.1.4.1.6ColumnfcFeModuleFxPortCapacityread-onlymandatoryThe number of FxPort that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapaci…
1.3.6.1.3.42.2.1.1.4.1.7ColumnfcFeModuleNameread-onlymandatoryThe Name_Identifier of the module.
1.3.6.1.3.42.2.1.1.5TablefcFxConfTablenot-accessiblemandatoryA table that contains, one entry for each FxPort in the Fabric Element, configuration and service parameters of the FxPorts.
1.3.6.1.3.42.2.1.1.5.1RowfcFxConfEntrynot-accessiblemandatoryAn entry containing the configuration and service parameters of a FxPort.
1.3.6.1.3.42.2.1.1.5.1.1ColumnfcFxConfModuleIndexread-onlymandatoryThis object identifies the module containing the FxPort for which this entry contains information.
1.3.6.1.3.42.2.1.1.5.1.2ColumnfcFxConfFxPortIndexread-onlymandatoryThis object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value rema…
1.3.6.1.3.42.2.1.1.5.1.3ColumnfcFxPortNameread-onlymandatoryThe name identifier of this FxPort. Each FxPort has a unique port name within the address space of the Fabric.
1.3.6.1.3.42.2.1.1.5.1.4ColumnfcFxPortFcphVersionHighread-onlymandatoryThe highest or most recent version of FC-PH that the FxPort is configured to support.
1.3.6.1.3.42.2.1.1.5.1.5ColumnfcFxPortFcphVersionLowread-onlymandatoryThe lowest or earliest version of FC-PH that the FxPort is configured to support.
1.3.6.1.3.42.2.1.1.5.1.6ColumnfcFxPortBbCreditread-onlymandatoryThe total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3 frames from the attached NxPort. It is for buffer-to-buffer flo…
1.3.6.1.3.42.2.1.1.5.1.7ColumnfcFxPortRxBufSizeread-onlymandatoryThe largest Data_Field Size (in octets) for an FT_1 frame that can be received by the FxPort.
1.3.6.1.3.42.2.1.1.5.1.8ColumnfcFxPortRatovread-onlymandatoryThe Resource_Allocation_Timeout Value configured for the FxPort. This is used as the timeout value for determining when to reuse an NxPort resource such as a R…
1.3.6.1.3.42.2.1.1.5.1.9ColumnfcFxPortEdtovread-onlymandatoryThe E_D_TOV value configured for the FxPort. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition.
1.3.6.1.3.42.2.1.1.5.1.10ColumnfcFxPortCosSupportedread-onlymandatoryA value indicating the set of Classes of Service supported by the FxPort.
1.3.6.1.3.42.2.1.1.5.1.11ColumnfcFxPortIntermixSupportedread-onlymandatoryA flag indicating whether or not the FxPort supports an Intermixed Dedicated Connection.
1.3.6.1.3.42.2.1.1.5.1.12ColumnfcFxPortStackedConnModeread-onlymandatoryA value indicating the mode of Stacked Connect supported by the FxPort.
1.3.6.1.3.42.2.1.1.5.1.13ColumnfcFxPortClass2SeqDelivread-onlymandatoryA flag indicating whether or not Class 2 Sequential Delivery is supported by the FxPort.
1.3.6.1.3.42.2.1.1.5.1.14ColumnfcFxPortClass3SeqDelivread-onlymandatoryA flag indicating whether or not Class 3 Sequential Delivery is supported by the FxPort.
1.3.6.1.3.42.2.1.1.5.1.15ColumnfcFxPortHoldTimeread-onlymandatoryThe maximum time (in microseconds) that the FxPort shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that …
1.3.6.1.3.42.2.1.1.5.1.16ColumnfcFxPortBaudRateread-onlydeprecatedThe FC-0 baud rate of the FxPort.
1.3.6.1.3.42.2.1.1.5.1.17ColumnfcFxPortMediumread-onlydeprecatedThe FC-0 medium of the FxPort.
1.3.6.1.3.42.2.1.1.5.1.18ColumnfcFxPortTxTyperead-onlydeprecatedThe FC-0 transmitter type of the FxPort.
1.3.6.1.3.42.2.1.1.5.1.19ColumnfcFxPortDistanceread-onlydeprecatedThe FC-0 distance range of the FxPort transmitter.
1.3.6.1.3.42.2.1.2NodefcFeOp
1.3.6.1.3.42.2.1.2.1TablefcFxPortOperTablenot-accessiblemandatoryA table that contains, one entry for each FxPort in the Fabric Element, operational status and parameters of the FxPorts.
1.3.6.1.3.42.2.1.2.1.1RowfcFxPortOperEntrynot-accessiblemandatoryAn entry containing operational status and parameters of a FxPort.
1.3.6.1.3.42.2.1.2.1.1.1ColumnfcFxPortOperModuleIndexread-onlymandatoryThis object identifies the module containing the FxPort for which this entry contains information.
1.3.6.1.3.42.2.1.2.1.1.2ColumnfcFxPortOperFxPortIndexread-onlymandatoryThis object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value rema…
1.3.6.1.3.42.2.1.2.1.1.3ColumnfcFxPortIDread-onlymandatoryThe address identifier by which this FxPort is identified within the Fabric. The FxPort may assign its address identifier to its attached NxPort(s) during Fabr…
1.3.6.1.3.42.2.1.2.1.1.4ColumnfcFPortAttachedPortNameread-onlydeprecatedThe port name of the attached N_Port, if applicable. If the value of this object is '0000000000000000'H, this FxPort has no NxPort attached to it. This variabl…
1.3.6.1.3.42.2.1.2.1.1.5ColumnfcFPortConnectedPortread-onlydeprecatedThe address identifier of the destination FxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection. If the value of this obj…
1.3.6.1.3.42.2.1.2.1.1.6ColumnfcFxPortBbCreditAvailableread-onlymandatoryThe number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or eq…
1.3.6.1.3.42.2.1.2.1.1.7ColumnfcFxPortOperModeread-onlymandatoryThe current operational mode of the FxPort.
1.3.6.1.3.42.2.1.2.1.1.8ColumnfcFxPortAdminModeread-onlymandatoryThe desired operational mode of the FxPort.
1.3.6.1.3.42.2.1.2.3TablefcFxPortPhysTablenot-accessiblemandatoryA table that contains, one entry for each FxPort in the Fabric Element, physical level status and parameters of the FxPorts.
1.3.6.1.3.42.2.1.2.3.1RowfcFxPortPhysEntrynot-accessiblemandatoryAn entry containing physical level status and parameters of a FxPort.
1.3.6.1.3.42.2.1.2.3.1.1ColumnfcFxPortPhysModuleIndexread-onlymandatoryThis object identifies the module containing the FxPort for which this entry contains information.
1.3.6.1.3.42.2.1.2.3.1.2ColumnfcFxPortPhysFxPortIndexread-onlymandatoryThis object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value rema…
1.3.6.1.3.42.2.1.2.3.1.3ColumnfcFxPortPhysAdminStatusread-writemandatoryThe desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The testing(3) state indicate…
1.3.6.1.3.42.2.1.2.3.1.4ColumnfcFxPortPhysOperStatusread-onlymandatoryThe current operational status of the FxPort. The testing(3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2) then …
1.3.6.1.3.42.2.1.2.3.1.5ColumnfcFxPortPhysLastChangeread-onlymandatoryThe value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort's operational status has not ch…
1.3.6.1.3.42.2.1.2.3.1.6ColumnfcFxPortPhysRttovread-onlymandatoryThe Receiver_Transmitter_Timeout value of the FxPort. This is used by the receiver logic to detect Loss of Synchronization.
1.3.6.1.3.42.2.1.2.4TablefcFxlogiTablenot-accessiblemandatoryA table that contains, one entry for each FxPort in the Fabric Element, services parameters established from the most recent Fabric Login, explicit or implicit.
1.3.6.1.3.42.2.1.2.4.1RowfcFxlogiEntrynot-accessiblemandatoryAn entry containing service parameters established from a successful Fabric Login.
1.3.6.1.3.42.2.1.2.4.1.1ColumnfcFxlogiModuleIndexread-onlymandatoryThis object identifies the module containing the FxPort for which this entry contains information.
1.3.6.1.3.42.2.1.2.4.1.2ColumnfcFxlogiFxPortIndexread-onlymandatoryThis object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value rema…
1.3.6.1.3.42.2.1.2.4.1.3ColumnfcFxlogiNxPortIndexread-onlymandatoryThe object identifies the associated NxPort in the attachment for which the entry contains information.
1.3.6.1.3.42.2.1.2.4.1.4ColumnfcFxPortFcphVersionAgreedread-onlymandatoryThe version of FC-PH that the FxPort has agreed to support from the Fabric Login
1.3.6.1.3.42.2.1.2.4.1.5ColumnfcFxPortNxPortBbCreditread-onlymandatoryThe total number of buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames to be transmitted to the attached NxPort. It is for buffer…
1.3.6.1.3.42.2.1.2.4.1.6ColumnfcFxPortNxPortRxDataFieldSizeread-onlymandatoryThe Receive Data Field Size of the attached NxPort. This is a binary value that specifies the largest Data Field Size for an FT_1 frame that can be received by…
1.3.6.1.3.42.2.1.2.4.1.7ColumnfcFxPortCosSuppAgreedread-onlymandatoryA variable indicating that the attached NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request.
1.3.6.1.3.42.2.1.2.4.1.8ColumnfcFxPortIntermixSuppAgreedread-onlymandatoryA variable indicating that the attached NxPort has requested the FxPort for the support of Intermix and the FxPort has granted the request. This flag is only v…
1.3.6.1.3.42.2.1.2.4.1.9ColumnfcFxPortStackedConnModeAgreedread-onlymandatoryA variable indicating whether the FxPort has agreed to support stacked connect from the Fabric Login. This is only meaningful if Class 1 service has been agree…
1.3.6.1.3.42.2.1.2.4.1.10ColumnfcFxPortClass2SeqDelivAgreedread-onlymandatoryA variable indicating whether the FxPort has agreed to support Class 2 sequential delivery from the Fabric Login. This is only meaningful if Class 2 service ha…
1.3.6.1.3.42.2.1.2.4.1.11ColumnfcFxPortClass3SeqDelivAgreedread-onlymandatoryA flag indicating whether the FxPort has agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if Class 3 service has be…
1.3.6.1.3.42.2.1.2.4.1.12ColumnfcFxPortNxPortNameread-onlymandatoryThe port name of the attached NxPort, if applicable. If the value of this object is '0000000000000000'H, this FxPort has no NxPort attached to it.
1.3.6.1.3.42.2.1.2.4.1.13ColumnfcFxPortConnectedNxPortread-onlymandatoryThe address identifier of the destination FxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection. If the value of this obj…
1.3.6.1.3.42.2.1.2.4.1.14ColumnfcFxPortBbCreditModelread-onlymandatoryThis object identifies the BB_Credit model used by the FxPort. The regular model refers to the Buffer-to-Buffer flow control mechanism defined in FC-PH [1] is …
1.3.6.1.3.42.2.1.3NodefcFeError
1.3.6.1.3.42.2.1.3.1TablefcFxPortErrorTablenot-accessiblemandatoryA table that contains, one entry for each FxPort, counters that record the numbers of errors detected.
1.3.6.1.3.42.2.1.3.1.1RowfcFxPortErrorEntrynot-accessiblemandatoryAn entry containing error counters of a FxPort.
1.3.6.1.3.42.2.1.3.1.1.1ColumnfcFxPortErrorModuleIndexread-onlymandatoryThis object identifies the module containing the FxPort for which this entry contains information.
1.3.6.1.3.42.2.1.3.1.1.2ColumnfcFxPortErrorFxPortIndexread-onlymandatoryThis object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value rema…
1.3.6.1.3.42.2.1.3.1.1.3ColumnfcFxPortLinkFailuresread-onlymandatoryThe number of link failures detected by this FxPort.
1.3.6.1.3.42.2.1.3.1.1.4ColumnfcFxPortSyncLossesread-onlymandatoryThe number of loss of synchronization detected by the FxPort.
1.3.6.1.3.42.2.1.3.1.1.5ColumnfcFxPortSigLossesread-onlymandatoryThe number of loss of signal detected by the FxPort.
1.3.6.1.3.42.2.1.3.1.1.6ColumnfcFxPortPrimSeqProtoErrorsread-onlymandatoryThe number of primitive sequence protocol errors detected by the FxPort.
1.3.6.1.3.42.2.1.3.1.1.7ColumnfcFxPortInvalidTxWordsread-onlymandatoryThe number of invalid transmission word detected by the FxPort.
1.3.6.1.3.42.2.1.3.1.1.8ColumnfcFxPortInvalidCrcsread-onlymandatoryThe number of invalid CRC detected by this FxPort.
1.3.6.1.3.42.2.1.3.1.1.9ColumnfcFxPortDelimiterErrorsread-onlymandatoryThe number of Delimiter Errors detected by this FxPort.
1.3.6.1.3.42.2.1.3.1.1.10ColumnfcFxPortAddressIdErrorsread-onlymandatoryThe number of address identifier errors detected by this FxPort.
1.3.6.1.3.42.2.1.3.1.1.11ColumnfcFxPortLinkResetInsread-onlymandatoryThe number of Link Reset Protocol received by this FxPort from the attached NxPort.
1.3.6.1.3.42.2.1.3.1.1.12ColumnfcFxPortLinkResetOutsread-onlymandatoryThe number of Link Reset Protocol issued by this FxPort to the attached NxPort.
1.3.6.1.3.42.2.1.3.1.1.13ColumnfcFxPortOlsInsread-onlymandatoryThe number of Offline Sequence received by this FxPort.
1.3.6.1.3.42.2.1.3.1.1.14ColumnfcFxPortOlsOutsread-onlymandatoryThe number of Offline Sequence issued by this FxPort.
1.3.6.1.3.42.2.1.4NodefcFeAcct
1.3.6.1.3.42.2.1.4.1TablefcFxPortC1AcctTablenot-accessiblemandatoryA table that contains, one entry for each FxPort in the Fabric Element, Class 1 accounting information recorded since the management agent has re-initialized.
1.3.6.1.3.42.2.1.4.1.1RowfcFxPortC1AcctEntrynot-accessiblemandatoryAn entry containing Class 1 accounting information for each FxPort.
1.3.6.1.3.42.2.1.4.1.1.1ColumnfcFxPortC1AcctModuleIndexread-onlymandatoryThis object identifies the module containing the FxPort for which this entry contains information.
1.3.6.1.3.42.2.1.4.1.1.2ColumnfcFxPortC1AcctFxPortIndexread-onlymandatoryThis object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value rema…
1.3.6.1.3.42.2.1.4.1.1.3ColumnfcFxPortC1InConnectionsread-onlymandatoryThe number of Class 1 connections successfully established in which the attached NxPort is the source of the connect-request.
1.3.6.1.3.42.2.1.4.1.1.4ColumnfcFxPortC1OutConnectionsread-onlymandatoryThe number of Class 1 connections successfully established in which the attached NxPort is the destination of the connect-request.
1.3.6.1.3.42.2.1.4.1.1.5ColumnfcFxPortC1FbsyFramesread-onlymandatoryThe number of F_BSY frames generated by this FxPort against Class 1 connect-request.
1.3.6.1.3.42.2.1.4.1.1.6ColumnfcFxPortC1FrjtFramesread-onlymandatoryThe number of F_RJT frames generated by this FxPort against Class 1 connect-request.
1.3.6.1.3.42.2.1.4.1.1.7ColumnfcFxPortC1ConnTimeread-onlymandatoryThe cumulative time that this FxPort has been engaged in Class 1 connection. The amount of time of each connection is counted in octets from after a connect- r…
1.3.6.1.3.42.2.1.4.1.1.8ColumnfcFxPortC1InFramesread-onlymandatoryThe number of Class 1 frames (other than Class 1 connect-request) received by this FxPort from its attached NxPort.
1.3.6.1.3.42.2.1.4.1.1.9ColumnfcFxPortC1OutFramesread-onlymandatoryThe number of Class 1 frames (other than Class 1 connect-request) delivered through this FxPort to its attached NxPort.
1.3.6.1.3.42.2.1.4.1.1.10ColumnfcFxPortC1InOctetsread-onlymandatoryThe number of Class 1 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.
1.3.6.1.3.42.2.1.4.1.1.11ColumnfcFxPortC1OutOctetsread-onlymandatoryThe number of Class 1 frame octets, including the frame delimiters, delivered through this FxPort its attached NxPort.
1.3.6.1.3.42.2.1.4.1.1.12ColumnfcFxPortC1Discardsread-onlymandatoryThe number of Class 1 frames discarded by this FxPort.
1.3.6.1.3.42.2.1.4.2TablefcFxPortC2AcctTablenot-accessiblemandatoryA table that contains, one entry for each FxPort in the Fabric Element, Class 2 accounting information recorded since the management agent has re-initialized.
1.3.6.1.3.42.2.1.4.2.1RowfcFxPortC2AcctEntrynot-accessiblemandatoryAn entry containing Class 2 accounting information for each FxPort.
1.3.6.1.3.42.2.1.4.2.1.1ColumnfcFxPortC2AcctModuleIndexread-onlymandatoryThis object identifies the module containing the FxPort for which this entry contains information.
1.3.6.1.3.42.2.1.4.2.1.2ColumnfcFxPortC2AcctFxPortIndexread-onlymandatoryThis object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value rema…
1.3.6.1.3.42.2.1.4.2.1.3ColumnfcFxPortC2InFramesread-onlymandatoryThe number of Class 2 frames received by this FxPort from its attached NxPort.
1.3.6.1.3.42.2.1.4.2.1.4ColumnfcFxPortC2OutFramesread-onlymandatoryThe number of Class 2 frames delivered through this FxPort to its attached NxPort.
1.3.6.1.3.42.2.1.4.2.1.5ColumnfcFxPortC2InOctetsread-onlymandatoryThe number of Class 2 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.
1.3.6.1.3.42.2.1.4.2.1.6ColumnfcFxPortC2OutOctetsread-onlymandatoryThe number of Class 2 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort.
1.3.6.1.3.42.2.1.4.2.1.7ColumnfcFxPortC2Discardsread-onlymandatoryThe number of Class 2 frames discarded by this FxPort.
1.3.6.1.3.42.2.1.4.2.1.8ColumnfcFxPortC2FbsyFramesread-onlymandatoryThe number of F_BSY frames generated by this FxPort against Class 2 frames.
1.3.6.1.3.42.2.1.4.2.1.9ColumnfcFxPortC2FrjtFramesread-onlymandatoryThe number of F_RJT frames generated by this FxPort against Class 2 frames.
1.3.6.1.3.42.2.1.4.3TablefcFxPortC3AcctTablenot-accessiblemandatoryA table that contains, one entry for each FxPort in the Fabric Element, Class 3 accounting information recorded since the management agent has re-initialized.
1.3.6.1.3.42.2.1.4.3.1RowfcFxPortC3AcctEntrynot-accessiblemandatoryAn entry containing Class 3 accounting information for each FxPort.
1.3.6.1.3.42.2.1.4.3.1.1ColumnfcFxPortC3AcctModuleIndexread-onlymandatoryThis object identifies the module containing the FxPort for which this entry contains information.
1.3.6.1.3.42.2.1.4.3.1.2ColumnfcFxPortC3AcctFxPortIndexread-onlymandatoryThis object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value rema…
1.3.6.1.3.42.2.1.4.3.1.3ColumnfcFxPortC3InFramesread-onlymandatoryThe number of Class 3 frames received by this FxPort from its attached NxPort.
1.3.6.1.3.42.2.1.4.3.1.4ColumnfcFxPortC3OutFramesread-onlymandatoryThe number of Class 3 frames delivered through this FxPort to its attached NxPort.
1.3.6.1.3.42.2.1.4.3.1.5ColumnfcFxPortC3InOctetsread-onlymandatoryThe number of Class 3 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.
1.3.6.1.3.42.2.1.4.3.1.6ColumnfcFxPortC3OutOctetsread-onlymandatoryThe number of Class 3 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort.
1.3.6.1.3.42.2.1.4.3.1.7ColumnfcFxPortC3Discardsread-onlymandatoryThe number of Class 3 frames discarded by this FxPort.
1.3.6.1.3.42.2.1.5NodefcFeCap
1.3.6.1.3.42.2.1.5.1TablefcFxPortCapTablenot-accessiblemandatoryA table that contains, one entry for each FxPort, the capabilities of the port within the Fabric Element.
1.3.6.1.3.42.2.1.5.1.1RowfcFxPortCapEntrynot-accessiblemandatoryAn entry containing the capabilities of a FxPort.
1.3.6.1.3.42.2.1.5.1.1.1ColumnfcFxPortCapModuleIndexread-onlymandatoryThis object identifies the module containing the FxPort for which this entry contains information.
1.3.6.1.3.42.2.1.5.1.1.2ColumnfcFxPortCapFxPortIndexread-onlymandatoryThis object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value rema…
1.3.6.1.3.42.2.1.5.1.1.3ColumnfcFxPortCapFcphVersionHighread-onlymandatoryThe highest or most recent version of FC-PH that the FxPort is capable of supporting.
1.3.6.1.3.42.2.1.5.1.1.4ColumnfcFxPortCapFcphVersionLowread-onlymandatoryThe lowest or earliest version of FC-PH that the FxPort is capable of supporting.
1.3.6.1.3.42.2.1.5.1.1.5ColumnfcFxPortCapBbCreditMaxread-onlymandatoryThe maximum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort.
1.3.6.1.3.42.2.1.5.1.1.6ColumnfcFxPortCapBbCreditMinread-onlymandatoryThe minimum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort.
1.3.6.1.3.42.2.1.5.1.1.7ColumnfcFxPortCapRxDataFieldSizeMaxread-onlymandatoryThe maximum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort.
1.3.6.1.3.42.2.1.5.1.1.8ColumnfcFxPortCapRxDataFieldSizeMinread-onlymandatoryThe minimum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort.
1.3.6.1.3.42.2.1.5.1.1.9ColumnfcFxPortCapCosread-onlymandatoryA value indicating the set of Classes of Service that the FxPort is capable of supporting.
1.3.6.1.3.42.2.1.5.1.1.10ColumnfcFxPortCapIntermixread-onlymandatoryA flag indicating whether or not the FxPort is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is on…
1.3.6.1.3.42.2.1.5.1.1.11ColumnfcFxPortCapStackedConnModeread-onlymandatoryA value indicating the mode of Stacked Connect request that the FxPort is capable of supporting.
1.3.6.1.3.42.2.1.5.1.1.12ColumnfcFxPortCapClass2SeqDelivread-onlymandatoryA flag indicating whether or not the FxPort is capable of supporting Class 2 Sequential Delivery.
1.3.6.1.3.42.2.1.5.1.1.13ColumnfcFxPortCapClass3SeqDelivread-onlymandatoryA flag indicating whether or not the FxPort is capable of supporting Class 3 Sequential Delivery.
1.3.6.1.3.42.2.1.5.1.1.14ColumnfcFxPortCapHoldTimeMaxread-onlymandatoryThe maximum holding time (in microseconds) that the FxPort is capable of supporting.
1.3.6.1.3.42.2.1.5.1.1.15ColumnfcFxPortCapHoldTimeMinread-onlymandatoryThe minimum holding time (in microseconds) that the FxPort is capable of supporting.
1.3.6.1.3.42.2.1.5.1.1.16ColumnfcFxPortCapBaudRatesread-onlydeprecatedA value indicating the set of baud rates that the FxPort is capable of supporting. This variable has been deprecated and may be implemented for backward compab…
1.3.6.1.3.42.2.1.5.1.1.17ColumnfcFxPortCapMediaread-onlydeprecatedA value indicating the set of media that the FxPort is capable of supporting. This variable has been deprecated and may be implemented for backward compability.
Type Definitions
NameSyntaxStatusDescription
DisplayStringOCTET STRING (SIZE (0..255))
Fc0BaudRateINTEGER { other (1), oneEighth (2), quarter (4), half (8), full (16), double (32), quadruple (64) }
Fc0BaudRateCapINTEGER (0..127)
Fc0DistanceINTEGER { unknown (1), long (2), intermediate (3), short (4) }
Fc0MediaCapINTEGER (0..65535)
Fc0MediumINTEGER { unknown (1), sm (2), m5 (4), m6 (8), tv (16), mi (32), stp (64), tw (128), lv (256) }
Fc0TxTypeINTEGER { unknown (1), longWaveLaser (2), shortWaveLaser (3), longWaveLED (4), electrical (5), shortWaveLaser-noOFC (6) }
FcAddressIdOCTET STRING (SIZE (3))
FcBbCreditINTEGER (0..32767)
FcBbCreditModelINTEGER { regular (1), alternate (2) }
FcCosCapINTEGER (0..127)
FcFeFxPortCapacityINTEGER (1..256)
FcFeFxPortIndexINTEGER (1..256)
FcFeModuleCapacityINTEGER (1..256)
FcFeModuleIndexINTEGER (1..256)
FcFeNxPortIndexINTEGER (1..126)
FcFxPortModeINTEGER { unknown (1), fPort (2), flPort (3) }
FcNameIdOCTET STRING (SIZE (8))
FcphVersionINTEGER (0..255)
FcRxDataFieldSizeINTEGER (128..2112)
FcStackedConnModeINTEGER { none (1), transparent (2), lockedDown (3) }
MicroSecondsINTEGER (0..2147383647)
MilliSecondsINTEGER (0..2147383647)