FD-SYSTEM-MIB
96 objects
system mib module
Imported Objects
| EPON-EOC-MIB | DeviceOperation DeviceStatus DeviceType epon LedStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.34592.1.3.1 | IdentitysystemInfo | system mib module | ||
| 1.3.6.1.4.1.34592.1.3.1.1 | NodesysBaseInfo | |||
| 1.3.6.1.4.1.34592.1.3.1.1.1 | ScalarsysModel | read-only | current | OLT platform system model |
| 1.3.6.1.4.1.34592.1.3.1.1.2 | ScalarsysDesc | read-write | current | Used for system manager to give a brief system description information |
| 1.3.6.1.4.1.34592.1.3.1.1.3 | ScalarsysLocation | read-write | current | Used for system manager to input the device(olt platform) location information |
| 1.3.6.1.4.1.34592.1.3.1.1.4 | ScalarsysContact | read-write | current | system manager contact information |
| 1.3.6.1.4.1.34592.1.3.1.1.5 | ScalarsysMajAlarmLed | read-only | current | Status of main card MAJ led |
| 1.3.6.1.4.1.34592.1.3.1.1.6 | ScalarsysCriAlarmLed | read-only | current | Status of main card CRJ led |
| 1.3.6.1.4.1.34592.1.3.1.1.7 | ScalarsysAlarmDesc | read-only | current | Meaning of MAJ and CRI alarm leds. Normally, you can get alarm meaning from this object when one of or both the MAJ and CRI alarm leds are lip |
| 1.3.6.1.4.1.34592.1.3.1.2 | NodesysConfig | |||
| 1.3.6.1.4.1.34592.1.3.1.2.1 | ScalarconsolePortSpd | read-only | current | Main card CONSOLE port access speed |
| 1.3.6.1.4.1.34592.1.3.1.2.2 | ScalarmanageIpAddr | read-write | current | The IP Address of outband network management port |
| 1.3.6.1.4.1.34592.1.3.1.2.3 | ScalarmanageNetMask | read-write | current | The network mask of outband network management port |
| 1.3.6.1.4.1.34592.1.3.1.2.4 | ScalarmanageGateway | read-write | current | The Default Gateway Address of outband network management port |
| 1.3.6.1.4.1.34592.1.3.1.2.5 | ScalarsnmpReadCommunity | read-write | current | The read-only community used on the embedded snmp agent |
| 1.3.6.1.4.1.34592.1.3.1.2.6 | ScalarsnmpRWCommunity | read-write | current | The read-write community used on the embedded snmp agent |
| 1.3.6.1.4.1.34592.1.3.1.2.8 | ScalartrapDstIpAddr1 | read-write | current | The first destination IP Address to which the system trap will send |
| 1.3.6.1.4.1.34592.1.3.1.2.9 | ScalartrapDstIpAddr2 | read-write | current | The second destination IP Address to which the system trap will send |
| 1.3.6.1.4.1.34592.1.3.1.2.10 | ScalartrapDstIpAddr3 | read-write | current | The third destination IP Address to which the system trap will send |
| 1.3.6.1.4.1.34592.1.3.1.2.11 | ScalartrapDstIpAddr4 | read-write | current | The fourth destination IP Address to which the system trap will send |
| 1.3.6.1.4.1.34592.1.3.1.2.12 | ScalarsysOperate | read-write | current | Set the value of this object to 'save(1)' to save all system configurations. Return 'noOperation(2)' when read. Set the value to 'noOperation(2)'will take noth… |
| 1.3.6.1.4.1.34592.1.3.1.3 | NodechassisInfo | |||
| 1.3.6.1.4.1.34592.1.3.1.3.1 | ScalarchassisType | read-only | current | type of the olt platform chassis |
| 1.3.6.1.4.1.34592.1.3.1.3.2 | ScalarchassisFactorySerial | read-only | current | Description. Chassis factory serial,reserved for future use. |
| 1.3.6.1.4.1.34592.1.3.1.3.3 | ScalarchassisRevision | read-only | current | Description. |
| 1.3.6.1.4.1.34592.1.3.1.3.4 | ScalarchassisTemperature | read-only | current | chassis temperature |
| 1.3.6.1.4.1.34592.1.3.1.3.5 | ScalarpowerStatusBit | read-only | current | Power status bit masks; value & 1 == 1 indicating power A on else off value & 2 == 2 indicating power B on else off |
| 1.3.6.1.4.1.34592.1.3.1.3.6 | ScalarfanStatusBit | read-only | current | Fan stauts bit masks value & 1 == 1 indicating fan 1 on else off value & 2 == 2 indicating fan 2 on else off value & 4 == 4 indicating fan 3 on else off value … |
| 1.3.6.1.4.1.34592.1.3.1.5 | NodecardModule | |||
| 1.3.6.1.4.1.34592.1.3.1.5.1 | NodemainCard | |||
| 1.3.6.1.4.1.34592.1.3.1.5.1.1 | ScalarmainCardType | read-only | current | type of main card (it is also called control and switch card) |
| 1.3.6.1.4.1.34592.1.3.1.5.1.2 | ScalarmainCardFactorySerial | read-only | current | Description. Main card factory serial, reserved for future use |
| 1.3.6.1.4.1.34592.1.3.1.5.1.3 | ScalarmainCardHWRevision | read-only | current | main card hardware revision |
| 1.3.6.1.4.1.34592.1.3.1.5.1.4 | ScalarmainCardSWVersion | read-only | current | software version running on main card |
| 1.3.6.1.4.1.34592.1.3.1.5.1.5 | ScalarmainCardRunningStatus | read-only | current | The running status of main card, it can only be normal or abnormal, since the main card is always online |
| 1.3.6.1.4.1.34592.1.3.1.5.1.6 | ScalarmainCardRunningTime | read-only | current | The running time since the main card was last powered |
| 1.3.6.1.4.1.34592.1.3.1.5.1.7 | ScalarmainCardOperate | read-write | current | The operation collection, such as reset, restore... |
| 1.3.6.1.4.1.34592.1.3.1.5.2 | NodeponCard | |||
| 1.3.6.1.4.1.34592.1.3.1.5.2.1 | TableponCardTable | not-accessible | current | This table defines base para objects of PON cards installed in the chassis |
| 1.3.6.1.4.1.34592.1.3.1.5.2.1.1 | RowponCardEntry | not-accessible | current | Each entry defines a sole PON card objects |
| 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.1 | ColumnponCardSlotId | not-accessible | current | PON card slot index, defined begin from 1 to max slot number |
| 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.2 | ColumnponCardType | read-only | current | PON card type value |
| 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.3 | ColumnponCardFactorySerial | read-only | current | Description. PON card factory serial, reserved for future use |
| 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.4 | ColumnponCardHwRev | read-only | current | PON card hardware revision |
| 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.5 | ColumnponCardFwVer | read-only | current | PON card software version |
| 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.7 | ColumnponCardRunningStatus | read-only | current | pon card on-line status, each pon card may have following status: not installed (present) installed but can not be connected by main card installed and can be … |
| 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.8 | ColumnponCardRuningTime | read-only | current | The running time since the pon card last powered |
| 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.9 | ColumnponCardOperate | read-write | current | Operate action taken on PON card |
| 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.10 | ColumnponCardUpgradeStat | read-only | current | Description. |
| 1.3.6.1.4.1.34592.1.3.1.6 | NodeonuAuth | |||
| 1.3.6.1.4.1.34592.1.3.1.6.1 | ScalarauthMethod | read-write | current | Which method that the manager will take to authenticate accessed ONUs, When set to blackList, the OLT will allow only the ONUs that their MAC is not included i… |
| 1.3.6.1.4.1.34592.1.3.1.6.2 | ScalarnonAuthOper | read-write | current | ONU MAC Authentication operation object, now, it can only be used to clear the MAC list which had tried to register but had not been authenticated |
| 1.3.6.1.4.1.34592.1.3.1.6.3 | TableonuAuthMacCfgTable | not-accessible | current | MAC list table which contain the ONU MAC address list, these MAC address will be used to authenticate accessed ONUs. |
| 1.3.6.1.4.1.34592.1.3.1.6.3.1 | RowonuAuthMacCfgEntry | not-accessible | current | Each entry in this table defines a sole MAC (when the beginMAC is equal to the endMAC or the endMAC is blank/zero) or a MAC range. |
| 1.3.6.1.4.1.34592.1.3.1.6.3.1.1 | ColumnauthMacEntryId | not-accessible | current | Description. entry serial ID, which used to identify an entry uniquely |
| 1.3.6.1.4.1.34592.1.3.1.6.3.1.2 | ColumnbeginMacAddr | read-create | current | begin MAC address, this object must be set to effect this entry |
| 1.3.6.1.4.1.34592.1.3.1.6.3.1.3 | ColumnendMacAddr | read-create | current | End MAC address of a MAC range entry. Set this value to zero will result that this entry only indicate a unique MAC. |
| 1.3.6.1.4.1.34592.1.3.1.6.3.1.4 | ColumnmacAttr | read-create | current | This object is used to decide that the MAC(s) introduced in this entry should be classified into blackList or whiteList. When set to 'obsolete', this entry is … |
| 1.3.6.1.4.1.34592.1.3.1.6.3.1.5 | ColumnonuAuthMacRowStatus | read-create | current | This object is used to create or delete a MAC entry |
| 1.3.6.1.4.1.34592.1.3.1.6.4 | TablenonAuthOnuListTable | not-accessible | current | This table contain illegal ONU MAC list which try to register on OLT |
| 1.3.6.1.4.1.34592.1.3.1.6.4.1 | RownonAuthOnuListEntry | not-accessible | current | Each entry in this table contain a nonAuth onu MAC info |
| 1.3.6.1.4.1.34592.1.3.1.6.4.1.1 | ColumnnonAuthOnuMacIndex | not-accessible | current | Administrativly assigned entry index |
| 1.3.6.1.4.1.34592.1.3.1.6.4.1.2 | ColumnnonAuthOnuMac | read-only | current | The MAC address which tried to register |
| 1.3.6.1.4.1.34592.1.3.1.6.4.1.3 | ColumnnonAuthOnuTries | read-only | current | The times that the illegal ONU try to register |
| 1.3.6.1.4.1.34592.1.3.1.7 | NodeuserManage | |||
| 1.3.6.1.4.1.34592.1.3.1.7.1 | TableuserManageTable | not-accessible | current | Description. Access user management table. The table defined the users who can access the system shell management interface, including local CLI and remote tel… |
| 1.3.6.1.4.1.34592.1.3.1.7.1.1 | RowuserManageEntry | not-accessible | current | Description. One entry contains one user attributes, up to 5 entries can be created in this table. |
| 1.3.6.1.4.1.34592.1.3.1.7.1.1.1 | ColumnuserId | not-accessible | current | Administrativly assigned entry index |
| 1.3.6.1.4.1.34592.1.3.1.7.1.1.2 | ColumnuserName | read-create | current | user name |
| 1.3.6.1.4.1.34592.1.3.1.7.1.1.3 | ColumnuserPassword | read-create | current | user password |
| 1.3.6.1.4.1.34592.1.3.1.7.1.1.4 | ColumnuserPermission | read-only | current | Description. This object define the user priority and other permission attributes |
| 1.3.6.1.4.1.34592.1.3.1.7.1.1.5 | ColumnuserAccessDeviceMap | read-create | current | This object is defined for future use. It is a bit map value which defines which devices in the system can be accessed by a user. Temporary definitions: |sys l… |
| 1.3.6.1.4.1.34592.1.3.1.7.1.1.6 | ColumnloginTimeout | read-only | current | Description. Time out time since one accessed user last operation, when this time elapse, the user will be kicked off |
| 1.3.6.1.4.1.34592.1.3.1.7.1.1.7 | ColumnuserEntryRowStatus | read-create | current | Use this object to create or delete a user info |
| 1.3.6.1.4.1.34592.1.3.1.8 | Nodeupgrade | |||
| 1.3.6.1.4.1.34592.1.3.1.8.1 | ScalarftpServerIp | read-write | current | The host IP Address on which FTP server running and this host will be used as the server to do FTP operation |
| 1.3.6.1.4.1.34592.1.3.1.8.2 | ScalarftpServerUserName | read-write | current | The user name used to access ftp server |
| 1.3.6.1.4.1.34592.1.3.1.8.3 | ScalarftpServerUserPasswd | read-write | current | The user password which will be used to access ftp server |
| 1.3.6.1.4.1.34592.1.3.1.8.4 | ScalarftpOperFileName | read-write | current | The file name which will be download to or upload from device. When the operation is download, the operation file should located on the host; When the operatio… |
| 1.3.6.1.4.1.34592.1.3.1.8.6 | ScalarftpOperTarget | read-write | current | The operate target, which are device firmware or configuration file. When do upgrade or download,one of these file targets should be selected to operate. ctrlC… |
| 1.3.6.1.4.1.34592.1.3.1.8.7 | ScalardwLoadFileCrcCheck | read-write | current | This object is used to indicate the target device should or not to do crc check operation,if 'checkCrc' the operator should give the download file's crc calcul… |
| 1.3.6.1.4.1.34592.1.3.1.8.8 | ScalardwLoadFileCrcValue | read-write | current | CRC value of the download file, this value will be used to compare with the CRC result calculated by the firmware running on device to check if error occurred … |
| 1.3.6.1.4.1.34592.1.3.1.8.9 | ScalaroperDeviceMap | read-write | current | This object defines the upgrade or download device objects,when do upgrade operation one or more device can be selected as operate objects. The data format def… |
| 1.3.6.1.4.1.34592.1.3.1.8.10 | ScalarupgradeStatus | read-only | current | Upgrade process status |
| 1.3.6.1.4.1.34592.1.3.1.8.11 | ScalarupgradeOperation | read-write | current | This object defines an operation collection, which are used to do downlaod,upgrade or get file(upload) operations. |
| 1.3.6.1.4.1.34592.1.3.1.8.12 | ScalarftpProgress | read-only | current | Description. |
| 1.3.6.1.4.1.34592.1.3.1.13 | NodefdSysConformance | |||
| 1.3.6.1.4.1.34592.1.3.1.13.1 | NodefdSystemGroups | |||
| 1.3.6.1.4.1.34592.1.3.1.13.1.1 | GroupsysBaseManageGroup | current | A collection of objects providing fd system basic features management | |
| 1.3.6.1.4.1.34592.1.3.1.13.1.2 | GroupchassisInfoGroup | current | A collection of objects providing chassis information management | |
| 1.3.6.1.4.1.34592.1.3.1.13.1.3 | GroupcardModuleGroup | current | A collection of objects providing installed card module basic features management | |
| 1.3.6.1.4.1.34592.1.3.1.13.1.4 | GrouponuAuthGroup | current | A collection of objects providing ONU authentication MAC list management | |
| 1.3.6.1.4.1.34592.1.3.1.13.1.5 | GroupuserManageGroup | current | A collection of objects providing system user management | |
| 1.3.6.1.4.1.34592.1.3.1.13.1.6 | GroupsystemUpgradeGroup | current | A collection of objects providing system device upgrade management | |
| 1.3.6.1.4.1.34592.1.3.1.13.2 | NodefdSystemCompliances | |||
| 1.3.6.1.4.1.34592.1.3.1.13.2.1 | CompliancefdSystemCompliance | current | The compliance statement |