FIBRE-CHANNEL-MGMT-MIB
195 objects
The fibre channel management MIB module.
Imported Objects
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.8888 | IdentityfcMgmtMIB | The fibre channel management MIB module. | ||
| 1.3.6.1.2.1.8888.0 | NodefcMgmtNotifications | |||
| 1.3.6.1.2.1.8888.0.1 | NotificationfcConnUnitStatusChange | current | The overall status of the connectivity unit has changed. Recommended severity level (for filtering): alert | |
| 1.3.6.1.2.1.8888.0.2 | NotificationfcConnUnitDeletedTrap | current | An fcConnUnit has been deleted from this agent. Recommended severity level (for filtering): warning | |
| 1.3.6.1.2.1.8888.0.3 | NotificationfcConnUnitEventTrap | current | An event has been generated by the connectivity unit. Recommended severity level (for filtering): info | |
| 1.3.6.1.2.1.8888.0.4 | NotificationfcConnUnitSensorStatusChange | current | The overall status of the connectivity unit has changed. Recommended severity level (for filtering): alert | |
| 1.3.6.1.2.1.8888.0.5 | NotificationfcConnUnitPortStatusChange | current | The overall status of the connectivity unit has changed. Recommended severity level (for filtering): alert | |
| 1.3.6.1.2.1.8888.1 | NodefcMgmtObjects | |||
| 1.3.6.1.2.1.8888.1.1 | NodefcMgmtConfig | |||
| 1.3.6.1.2.1.8888.1.1.1 | ScalarfcConnUnitNumber | read-only | current | The number of connectivity units present on this system. May be a count of the boards in a chassis or the number of full boxes in a rack. |
| 1.3.6.1.2.1.8888.1.1.2 | ScalarfcConnURL | read-only | current | The top-level URL of the system. If it does not exist the value is an empty string. The URL format is implementation dependent and can have keywords embedded t… |
| 1.3.6.1.2.1.8888.1.1.3 | TablefcConnUnitTable | not-accessible | current | The connectivity table contains general information on the system's units. The number of entries is given by the value of fcConnUnitNumber. It is 1 for stand-a… |
| 1.3.6.1.2.1.8888.1.1.3.1 | RowfcConnUnitEntry | not-accessible | current | A connectivity unit entry containing objects for a particular unit. |
| 1.3.6.1.2.1.8888.1.1.3.1.1 | ColumnfcConnUnitId | read-only | current | The unique identification for this connectivity unit among those within this proxy domain. The value MUST be unique within the proxy domain because it is the i… |
| 1.3.6.1.2.1.8888.1.1.3.1.2 | ColumnfcConnUnitGlobalId | read-only | current | An optional global-scope identifier for this connectivity unit. It MUST be a WWN for this connectivity unit or 16 octets of value zero. WWN formats requiring f… |
| 1.3.6.1.2.1.8888.1.1.3.1.3 | ColumnfcConnUnitType | read-only | current | The type of this connectivity unit. |
| 1.3.6.1.2.1.8888.1.1.3.1.4 | ColumnfcConnUnitNumPorts | read-only | current | The number of physical ports in the connectivity unit (internal/embedded, external). |
| 1.3.6.1.2.1.8888.1.1.3.1.5 | ColumnfcConnUnitNumLinks | read-only | current | The number of links in the link table. |
| 1.3.6.1.2.1.8888.1.1.3.1.6 | ColumnfcConnUnitState | read-only | current | This object reports the overall state of the connectivity unit. The meaning of all values is essentially self-explanatory. Any of these values may occur with a… |
| 1.3.6.1.2.1.8888.1.1.3.1.7 | ColumnfcConnUnitStatus | read-only | current | This object reports the overall status of the connectivity unit. The warning (4) value means that the connectivity unit needs attention; all other values are e… |
| 1.3.6.1.2.1.8888.1.1.3.1.8 | ColumnfcConnUnitProduct | read-only | current | The connectivity unit vendor's product model name. |
| 1.3.6.1.2.1.8888.1.1.3.1.9 | ColumnfcConnUnitSerialNo | read-only | current | The serial number identification for this connectivity unit. |
| 1.3.6.1.2.1.8888.1.1.3.1.10 | ColumnfcConnUnitUpTime | read-only | current | The number of centiseconds since the last unit initialization. |
| 1.3.6.1.2.1.8888.1.1.3.1.11 | ColumnfcConnUnitUrl | read-only | current | URL to launch a management application, if applicable. Otherwise empty string. In a standalone unit, this would be the same as the top-level URL. This has the … |
| 1.3.6.1.2.1.8888.1.1.3.1.12 | ColumnfcConnUnitDomainId | read-only | current | 24 bit Fibre Channel address ID of this connectivity unit. Following the fibre channel standard, the right-most bit of the right-most octet is for the least si… |
| 1.3.6.1.2.1.8888.1.1.3.1.13 | ColumnfcConnUnitProxyMaster | read-only | current | A value of 'yes' means this is the proxy master unit for a set of managed units. For example, this could be the only unit with a management card in it for a se… |
| 1.3.6.1.2.1.8888.1.1.3.1.14 | ColumnfcConnUnitPrincipal | read-only | current | Whether this connectivity unit is the principal unit within the group of fabric elements. If this value is not applicable, return unknown. |
| 1.3.6.1.2.1.8888.1.1.3.1.15 | ColumnfcConnUnitNumSensors | read-only | current | Number of sensors in the fcConnUnitSensorTable. |
| 1.3.6.1.2.1.8888.1.1.3.1.16 | ColumnfcConnUnitNumRevs | read-only | current | The number of revisions in the fcConnUnitRevsTable. |
| 1.3.6.1.2.1.8888.1.1.3.1.17 | ColumnfcConnUnitModuleId | read-only | current | This is a unique id, persistent between boots, that can be used to group a set of connectivity units together into a module. The intended use would be to creat… |
| 1.3.6.1.2.1.8888.1.1.3.1.18 | ColumnfcConnUnitName | read-write | current | A name for this connectivity unit. This object value should be persistent between boots. |
| 1.3.6.1.2.1.8888.1.1.3.1.19 | ColumnfcConnUnitInfo | read-write | current | Information about this connectivity unit. This object value should be persistent between boots. |
| 1.3.6.1.2.1.8888.1.1.3.1.20 | ColumnfcConnUnitControl | read-write | current | This object is used to control the addressed connectivity unit. NOTE: 'ColdStart' and 'WarmStart' are as defined in mib-2 and are not meant to be a factory res… |
| 1.3.6.1.2.1.8888.1.1.3.1.21 | ColumnfcConnUnitContact | read-write | current | Contact information for this connectivity unit. The contact information is intended to facilitate contacting someone in case of problems, questions, etc. (e.g.… |
| 1.3.6.1.2.1.8888.1.1.3.1.22 | ColumnfcConnUnitLocation | read-write | current | Location information for this connectivity unit. |
| 1.3.6.1.2.1.8888.1.1.3.1.23 | ColumnfcConnUnitEventFilter | read-write | current | This value defines the event severity that will be logged by this connectivity unit. All events of severity less than or equal to fcConnUnitEventFilter are log… |
| 1.3.6.1.2.1.8888.1.1.3.1.24 | ColumnfcConnUnitNumEvents | read-only | current | Number of events currently in the fcConnUnitEventTable. |
| 1.3.6.1.2.1.8888.1.1.3.1.25 | ColumnfcConnUnitMaxEvents | read-only | current | Max number of events that can be recorded at any one time in the fcConnUnitEventTable. |
| 1.3.6.1.2.1.8888.1.1.3.1.26 | ColumnfcConnUnitEventCurrID | read-only | current | The last used event ID (fcConnUnitEventId) recorded in the fcConnUnitEventTable. When no events are presently recorded in the fcConnUnitEventTable, the value o… |
| 1.3.6.1.2.1.8888.1.1.3.1.27 | ColumnfcConnUnitFabricID | read-only | current | A globally unique value to identify the fabric that this ConnUnit belongs to, otherwise empty string. This would typically be equal to the connUnitGlobalID of … |
| 1.3.6.1.2.1.8888.1.1.4 | TablefcConnUnitRevsTable | not-accessible | current | Table of the revisions of components (e.g., firmware, hardware, etc.) supported by the connectivity units managed by this agent. |
| 1.3.6.1.2.1.8888.1.1.4.1 | RowfcConnUnitRevsEntry | not-accessible | current | A row in the fcConnUnitRevsTable. |
| 1.3.6.1.2.1.8888.1.1.4.1.1 | ColumnfcConnUnitRevsIndex | read-only | current | A unique value among all fcConnUnitRevsEntrys with the same value of fcConnUnitId, in the range between 1 and fcConnUnitNumRevs[fcConnUnitId]. |
| 1.3.6.1.2.1.8888.1.1.4.1.2 | ColumnfcConnUnitRevsRevision | read-only | current | A vendor-specific value identifying a revision of a component of the connectivity unit. |
| 1.3.6.1.2.1.8888.1.1.4.1.3 | ColumnfcConnUnitRevsDescription | read-only | current | Description of a component in the ConnUnit to which the revision corresponds. |
| 1.3.6.1.2.1.8888.1.1.5 | TablefcConnUnitSensorTable | not-accessible | current | Table of the sensors supported by each connectivity unit. |
| 1.3.6.1.2.1.8888.1.1.5.1 | RowfcConnUnitSensorEntry | not-accessible | current | Each entry contains the information for a specific sensor. |
| 1.3.6.1.2.1.8888.1.1.5.1.1 | ColumnfcConnUnitSensorIndex | read-only | current | A unique value among all fcConnUnitSensorEntrys with the same value of fcConnUnitId, in the range between 1 and fcConnUnitNumSensors[fcConnUnitId]. |
| 1.3.6.1.2.1.8888.1.1.5.1.2 | ColumnfcConnUnitSensorName | read-only | current | A textual identification of the sensor intended primarily for operator use. |
| 1.3.6.1.2.1.8888.1.1.5.1.3 | ColumnfcConnUnitSensorStatus | read-only | current | The status indicated by the sensor. unknown (1) = the unit cannot determine the status other (2) = the status does not fit any of the remaining values ok (3) =… |
| 1.3.6.1.2.1.8888.1.1.5.1.4 | ColumnfcConnUnitSensorInfo | read-only | current | Miscellaneous static information about the sensor such as its serial number. |
| 1.3.6.1.2.1.8888.1.1.5.1.5 | ColumnfcConnUnitSensorMessage | read-only | current | This describes the status of the sensor as a message. It may also provide more resolution on the sensor indication, for example 'Cover temperature 1503K, above… |
| 1.3.6.1.2.1.8888.1.1.5.1.6 | ColumnfcConnUnitSensorType | read-only | current | The type of component being monitored by this sensor. The unknown (1) and other (2) values meanings analogous to those for the fcConnUnitSensorStatus object; a… |
| 1.3.6.1.2.1.8888.1.1.5.1.7 | ColumnfcConnUnitSensorCharacteristic | read-only | current | The characteristics being monitored by this sensor. The unknown (1) and other (2) values meanings analogous to those for the fcConnUnitSensorStatus object; emf… |
| 1.3.6.1.2.1.8888.1.1.6 | TablefcConnUnitPortTable | not-accessible | current | Generic information on ports for a specific connectivity unit. |
| 1.3.6.1.2.1.8888.1.1.6.1 | RowfcConnUnitPortEntry | not-accessible | current | Each entry contains the information for a specific port. |
| 1.3.6.1.2.1.8888.1.1.6.1.1 | ColumnfcConnUnitPortIndex | read-only | current | A unique value among all fcConnUnitPortEntrys on this connectivity unit, between 1 and fcConnUnitNumPorts. |
| 1.3.6.1.2.1.8888.1.1.6.1.2 | ColumnfcConnUnitPortType | read-only | current | The port type refers to the protocol active on the port and can take one of the following values: unknown (1) - cannot be determined other (2) - none of the fo… |
| 1.3.6.1.2.1.8888.1.1.6.1.3 | ColumnfcConnUnitPortFCClassCap | read-only | current | Bit mask that specifies the classes of service capability of this port. If this object is not applicable, the agent MUST return all bits set to zero. |
| 1.3.6.1.2.1.8888.1.1.6.1.4 | ColumnfcConnUnitPortFCClassOp | read-only | current | Bit mask that specifies the classes of service that are currently operational at this port. If this object is not applicable, the agent MUST return all bits se… |
| 1.3.6.1.2.1.8888.1.1.6.1.5 | ColumnfcConnUnitPortState | read-only | current | The current state of the port hardware. The bypassed value (4) means that the port is online but is currently being isolated from the loop or fabric for some r… |
| 1.3.6.1.2.1.8888.1.1.6.1.6 | ColumnfcConnUnitPortStatus | read-only | current | The current overall protocol status for the port. The warning value (4) means that the port needs attention; the notParticipating value (6) means that protocol… |
| 1.3.6.1.2.1.8888.1.1.6.1.7 | ColumnfcConnUnitPortTransmitterType | read-only | current | The technology of the port transceiver. |
| 1.3.6.1.2.1.8888.1.1.6.1.8 | ColumnfcConnUnitPortModuleType | read-only | current | The module type of the port connector. This object refers to the hardware implementation of the port. The embedded value (4) means 'fixed' (e.g., oneXnine). |
| 1.3.6.1.2.1.8888.1.1.6.1.9 | ColumnfcConnUnitPortWwn | read-only | current | The World Wide Name of the port if applicable, otherwise empty string. |
| 1.3.6.1.2.1.8888.1.1.6.1.10 | ColumnfcConnUnitPortFCId | read-only | current | This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits. If this is loop, then it is the ALPA that is co… |
| 1.3.6.1.2.1.8888.1.1.6.1.11 | ColumnfcConnUnitPortSerialNo | read-only | current | The serial number identification of the unit (e.g., for a GBIC). If this is not applicable, return a zero-length string. |
| 1.3.6.1.2.1.8888.1.1.6.1.12 | ColumnfcConnUnitPortRevision | read-only | current | The port revision (e.g., for a GBIC). |
| 1.3.6.1.2.1.8888.1.1.6.1.13 | ColumnfcConnUnitPortVendor | read-only | current | The port vendor (e.g., for a GBIC). |
| 1.3.6.1.2.1.8888.1.1.6.1.14 | ColumnfcConnUnitPortSpeed | read-only | current | The speed of the port in kilobytes per second. |
| 1.3.6.1.2.1.8888.1.1.6.1.15 | ColumnfcConnUnitPortControl | read-write | current | This object is used to control the addressed fcConnUnit's port. Valid commands are: unknown and invalid are only used as values that are read. resetConnUnitPor… |
| 1.3.6.1.2.1.8888.1.1.6.1.16 | ColumnfcConnUnitPortName | read-write | current | A string describing the addressed port. |
| 1.3.6.1.2.1.8888.1.1.6.1.17 | ColumnfcConnUnitPortPhysicalNumber | read-only | current | This is the internal port number this port is known by. In many implementations, this should be the same as fcConnUnitPortIndex. Some implementations may have … |
| 1.3.6.1.2.1.8888.1.1.6.1.18 | ColumnfcConnUnitPortProtocolCap | read-only | current | Bit mask that specifies the driver level protocol capability of this port. If this is not applicable, return all bits set to zero. The bits have the following … |
| 1.3.6.1.2.1.8888.1.1.6.1.19 | ColumnfcConnUnitPortProtocolOp | read-only | current | Bit mask that specifies the driver level protocol(s) that are currently operational. If this is not applicable, return all bits set to zero. This object has th… |
| 1.3.6.1.2.1.8888.1.1.6.1.20 | ColumnfcConnUnitPortNodeWwn | read-only | current | The Node World Wide Name of the port if applicable, otherwise all zeros. This should have the same value for a group of related ports. The container is defined… |
| 1.3.6.1.2.1.8888.1.1.6.1.21 | ColumnfcConnUnitPortHWState | read-only | current | The hardware detected state of the port. |
| 1.3.6.1.2.1.8888.1.1.7 | TablefcConnUnitEventTable | not-accessible | current | The table of connectivity unit events. Errors, warnings, and information should be reported in this table. |
| 1.3.6.1.2.1.8888.1.1.7.1 | RowfcConnUnitEventEntry | not-accessible | current | Each entry contains information on a specific event for the given connectivity unit. |
| 1.3.6.1.2.1.8888.1.1.7.1.1 | ColumnfcConnUnitEventIndex | read-only | current | Each connectivity unit has its own event buffer. As it wraps, it may write over previous events. This object is an index into the buffer. It is recommended tha… |
| 1.3.6.1.2.1.8888.1.1.7.1.2 | ColumnfcConnUnitREventTime | read-only | current | This is the real time when the event occurred. It has the following format. DDMMYYYY HHMMSS DD=day number MM=month number YYYY=year number HH=hour number MM=mi… |
| 1.3.6.1.2.1.8888.1.1.7.1.3 | ColumnfcConnUnitSEventTime | read-only | current | This is the sysuptime timestamp when the event occurred. |
| 1.3.6.1.2.1.8888.1.1.7.1.4 | ColumnfcConnUnitEventSeverity | read-only | current | The event severity level. |
| 1.3.6.1.2.1.8888.1.1.7.1.5 | ColumnfcConnUnitEventType | read-only | current | The type of this event. |
| 1.3.6.1.2.1.8888.1.1.7.1.6 | ColumnfcConnUnitEventObject | read-only | current | This is used with the fcConnUnitEventType to identify which object the event refers to. It can be the OID of a connectivity unit or of another object like fcCo… |
| 1.3.6.1.2.1.8888.1.1.7.1.7 | ColumnfcConnUnitEventDescr | read-only | current | The description of the event. |
| 1.3.6.1.2.1.8888.1.1.8 | TablefcConnUnitLinkTable | not-accessible | current | A list of links know to this agent from this connectivity unit to other connectivity units. |
| 1.3.6.1.2.1.8888.1.1.8.1 | RowfcConnUnitLinkEntry | not-accessible | current | An entry describing a particular link to another. |
| 1.3.6.1.2.1.8888.1.1.8.1.1 | ColumnfcConnUnitLinkIndex | read-only | current | This value is used to create a unique value for each entry in the link table with the same fcConnUnitId. The value can only be reused if it is not currently in… |
| 1.3.6.1.2.1.8888.1.1.8.1.2 | ColumnfcConnUnitLinkNodeIdX | read-only | current | The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is an fcConnUnit in the responding agent then the value of this object… |
| 1.3.6.1.2.1.8888.1.1.8.1.3 | ColumnfcConnUnitLinkPortNumberX | read-only | current | The port number on the unit specified by fcConnUnitLinkNodeIdX if known, otherwise -1. If the value is non-negative then it will be equal to fcConnUnitPortPhys… |
| 1.3.6.1.2.1.8888.1.1.8.1.4 | ColumnfcConnUnitLinkPortWwnX | read-only | current | The port WWN of the unit specified by fcConnUnitLinkNodeIdX if known, otherwise 16 octets of binary 0. |
| 1.3.6.1.2.1.8888.1.1.8.1.5 | ColumnfcConnUnitLinkNodeIdY | read-only | current | The node WWN of the unit at the other end of the link. If the node WWN is unknown and the node is an fcConnUnit in the responding agent, then the value of this… |
| 1.3.6.1.2.1.8888.1.1.8.1.6 | ColumnfcConnUnitLinkPortNumberY | read-only | current | The port number on the unit specified by fcConnUnitLinkNodeIdY if known, otherwise -1. If the value is non-negative then it will be equal to fcConnUnitPortPhys… |
| 1.3.6.1.2.1.8888.1.1.8.1.7 | ColumnfcConnUnitLinkPortWwnY | read-only | current | The port WWN on the unit specified by fcConnUnitLinkNodeIdY if known, otherwise 16 octets of binary 0. |
| 1.3.6.1.2.1.8888.1.1.8.1.8 | ColumnfcConnUnitLinkAgentAddressY | read-only | current | The address of an FCMGMT MIB agent for the node identified by fcConnUnitLinkNodeIdY, if known; otherwise 16 octets of binary 0. |
| 1.3.6.1.2.1.8888.1.1.8.1.9 | ColumnfcConnUnitLinkAgentAddressTypeY | read-only | current | If fcConnUnitLinkAgentAddressY is non-zero, then it is a protocol address. fcConnUnitLinkAgentAddressTypeY is the the 'address family number' assigned by IANA … |
| 1.3.6.1.2.1.8888.1.1.8.1.10 | ColumnfcConnUnitLinkAgentMask | read-only | current | The mask to use for the address specified. |
| 1.3.6.1.2.1.8888.1.1.8.1.11 | ColumnfcConnUnitLinkAgentPortY | read-only | current | The IP port number for the agent. This is provided in case the agent is at a non-standard SNMP port. |
| 1.3.6.1.2.1.8888.1.1.8.1.12 | ColumnfcConnUnitLinkUnitTypeY | read-only | current | Type of the FC connectivity unit as defined in fcConnUnitType. |
| 1.3.6.1.2.1.8888.1.1.8.1.13 | ColumnfcConnUnitLinkConnIdY | read-only | current | This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a 24-bit Big Endian value. If this is loop, then it is … |
| 1.3.6.1.2.1.8888.1.1.9 | ScalarfcConnUnitSnsMaxRows | read-only | current | The maximum number of rows in the fcConnUnitSnsTable table. |
| 1.3.6.1.2.1.8888.1.2 | NodefcMgmtNotifyFilter | |||
| 1.3.6.1.2.1.8888.1.2.1 | ScalarfcTrapMaxClients | read-only | current | The maximum number of SNMP trap recipients supported by the connectivity unit. |
| 1.3.6.1.2.1.8888.1.2.2 | ScalarfcTrapClientCount | read-only | current | The current number of rows in the trap table. |
| 1.3.6.1.2.1.8888.1.2.3 | TablefcTrapRegTable | not-accessible | current | A table containing a row for each IP address/port number that traps will be sent to. |
| 1.3.6.1.2.1.8888.1.2.3.1 | RowfcTrapRegEntry | not-accessible | current | Ip/Port pair for a specific client. |
| 1.3.6.1.2.1.8888.1.2.3.1.1 | ColumnfcTrapRegIpAddress | read-create | current | The Ip address of a client registered for traps. |
| 1.3.6.1.2.1.8888.1.2.3.1.2 | ColumnfcTrapRegPort | read-create | current | The UDP port to send traps to for this host. Normally this would be the standard trap port (UDP/162). |
| 1.3.6.1.2.1.8888.1.2.3.1.3 | ColumnfcTrapRegFilter | read-create | current | This value defines the trap severity filter for this trap host. The fcConnUnit will send to the designated target entity traps that have a severity level less … |
| 1.3.6.1.2.1.8888.1.2.3.1.4 | ColumnfcTrapRegRowState | read-create | current | Specifies the operational status of the row. A RowStatus object may take any of six defined values: - active: traps may be sent as specified in this row; a man… |
| 1.3.6.1.2.1.8888.1.3 | NodefcMgmtStatistics | |||
| 1.3.6.1.2.1.8888.1.3.1 | TablefcConnUnitPortStatTable | not-accessible | current | A list of statistics for the ports. |
| 1.3.6.1.2.1.8888.1.3.1.1 | RowfcConnUnitPortStatEntry | not-accessible | current | An entry describing port statistics. |
| 1.3.6.1.2.1.8888.1.3.1.1.1 | ColumnfcConnUnitPortStatIndex | read-only | current | A unique value among all entrys in this table, between 0 and fcConnUnitNumPort[fcConnUnitPortUnitId]. |
| 1.3.6.1.2.1.8888.1.3.1.1.2 | ColumnfcConnUnitPortStatErrs | read-only | current | A count of the errors that have occured on this port. |
| 1.3.6.1.2.1.8888.1.3.1.1.3 | ColumnfcConnUnitPortStatTxObjects | read-only | current | The number of frames/packets/IOs/etc that have been transmitted by this port. Note: A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices sh… |
| 1.3.6.1.2.1.8888.1.3.1.1.4 | ColumnfcConnUnitPortStatRxObjects | read-only | current | The number of frames/packets/IOs/etc that have been received by this port. Note: A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices shoul… |
| 1.3.6.1.2.1.8888.1.3.1.1.5 | ColumnfcConnUnitPortStatTxElements | read-only | current | The number of octets or bytes that have been transmitted by this port. One second periodic polling of the port. This value is saved and compared with the next … |
| 1.3.6.1.2.1.8888.1.3.1.1.6 | ColumnfcConnUnitPortStatRxElements | read-only | current | The number of octets or bytes that have been received by this port. One second periodic polling of the port. This value is saved and compared with the next pol… |
| 1.3.6.1.2.1.8888.1.3.1.1.7 | ColumnfcConnUnitPortStatBBCreditZero | read-only | current | Count of transitions in/out of BBcredit zero state. The other side is not providing any credit. Note, this is a Fibre Channel stat only. |
| 1.3.6.1.2.1.8888.1.3.1.1.8 | ColumnfcConnUnitPortStatInputBuffsFull | read-only | current | Count of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to zero. There is no credit to provide to oth… |
| 1.3.6.1.2.1.8888.1.3.1.1.9 | ColumnfcConnUnitPortStatFBSYFrames | read-only | current | Count of times that FBSY was returned to this port as a result of a frame that could not be delivered to the other end of the link. This occurs if either the F… |
| 1.3.6.1.2.1.8888.1.3.1.1.10 | ColumnfcConnUnitPortStatPBSYFrames | read-only | current | Count of times that PBSY was returned to this port as a result of a frame that could not be delivered to the other end of the link. This occurs if the destinat… |
| 1.3.6.1.2.1.8888.1.3.1.1.11 | ColumnfcConnUnitPortStatFRJTFrames | read-only | current | Count of times that FRJT was returned to this port as a result of a Frame that was rejected by the fabric. Note, this is the total for all classes and is a Fib… |
| 1.3.6.1.2.1.8888.1.3.1.1.12 | ColumnfcConnUnitPortStatPRJTFrames | read-only | current | Count of times that FRJT was returned to this port as a result of a Frame that was rejected at the destination N_Port. Note, this is the total for all classes … |
| 1.3.6.1.2.1.8888.1.3.1.1.13 | ColumnfcConnUnitPortStatC1RxFrames | read-only | current | Count of Class 1 Frames received at this port. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.14 | ColumnfcConnUnitPortStatC1TxFrames | read-only | current | Count of Class 1 Frames transmitted out this port. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.15 | ColumnfcConnUnitPortStatC1FBSYFrames | read-only | current | Count of times that FBSY was returned to this port as a result of a Class 1 Frame that could not be delivered to the other end of the link. This occurs if eith… |
| 1.3.6.1.2.1.8888.1.3.1.1.16 | ColumnfcConnUnitPortStatC1PBSYFrames | read-only | current | Count of times that PBSY was returned to this port as a result of a Class 1 Frame that could not be delivered to the other end of the link. This occurs if the … |
| 1.3.6.1.2.1.8888.1.3.1.1.17 | ColumnfcConnUnitPortStatC1FRJTFrames | read-only | current | Count of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected by the fabric. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.18 | ColumnfcConnUnitPortStatC1PRJTFrames | read-only | current | Count of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected at the destination N_Port. Note, this is a Fibre Channel on… |
| 1.3.6.1.2.1.8888.1.3.1.1.19 | ColumnfcConnUnitPortStatC2RxFrames | read-only | current | Count of Class 2 Frames received at this port. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.20 | ColumnfcConnUnitPortStatC2TxFrames | read-only | current | Count of Class 2 Frames transmitted out this port. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.21 | ColumnfcConnUnitPortStatC2FBSYFrames | read-only | current | Count of times that FBSY was returned to this port as a result of a Class 2 Frame that could not be delivered to the other end of the link. This occurs if eith… |
| 1.3.6.1.2.1.8888.1.3.1.1.22 | ColumnfcConnUnitPortStatC2PBSYFrames | read-only | current | Count of times that PBSY was returned to this port as a result of a Class 2 Frame that could not be delivered to the other end of the link. This occurs if the … |
| 1.3.6.1.2.1.8888.1.3.1.1.23 | ColumnfcConnUnitPortStatC2FRJTFrames | read-only | current | Count of times that FRJT was returned to this port as a result of a Class 2 Frame that was rejected by the fabric. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.24 | ColumnfcConnUnitPortStatC2PRJTFrames | read-only | current | Count of times that FRJT was returned to this port as a result of a Class 2 Frame that was rejected at the destination N_Port. Note, this is a Fibre Channel on… |
| 1.3.6.1.2.1.8888.1.3.1.1.25 | ColumnfcConnUnitPortStatC3RxFrames | read-only | current | Count of Class 3 Frames received at this port. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.26 | ColumnfcConnUnitPortStatC3TxFrames | read-only | current | Count of Class 3 Frames transmitted out of this port. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.27 | ColumnfcConnUnitPortStatC3Discards | read-only | current | Count of Class 3 Frames that were discarded upon reception at this port. There is no FBSY or FRJT generated for Class 3 Frames. They are simply discarded if th… |
| 1.3.6.1.2.1.8888.1.3.1.1.28 | ColumnfcConnUnitPortStatRxMcastObjects | read-only | current | Count of Multicast Frames or Packets received at this port. |
| 1.3.6.1.2.1.8888.1.3.1.1.29 | ColumnfcConnUnitPortStatTxMcastObjects | read-only | current | Count of Multicast Frames or Packets transmitted out this port. |
| 1.3.6.1.2.1.8888.1.3.1.1.30 | ColumnfcConnUnitPortStatRxBcastObjects | read-only | current | Count of Broadcast Frames or Packets received at this port. |
| 1.3.6.1.2.1.8888.1.3.1.1.31 | ColumnfcConnUnitPortStatTxBcastObjects | read-only | current | Count of Broadcast Frames or Packets transmitted out this port. On a Fibre Channel loop, count only OPNr frames generated. |
| 1.3.6.1.2.1.8888.1.3.1.1.32 | ColumnfcConnUnitPortStatRxLinkResets | read-only | current | Count of Link resets. This is the number of LRs received. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.33 | ColumnfcConnUnitPortStatTxLinkResets | read-only | current | Count of Link resets. This is the number LRs transmitted. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.34 | ColumnfcConnUnitPortStatLinkResets | read-only | current | Count of Link resets and LIPs detected at this port. The number times the reset link protocol is initiated. These are the count of the logical resets, a count … |
| 1.3.6.1.2.1.8888.1.3.1.1.35 | ColumnfcConnUnitPortStatRxOfflineSeqs | read-only | current | Count of Offline Primitive OLS received at this port. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.36 | ColumnfcConnUnitPortStatTxOfflineSeqs | read-only | current | Count of Offline Primitive OLS transmitted by this port. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.37 | ColumnfcConnUnitPortStatOfflineSeqs | read-only | current | Count of Offline Primitive sequence received at this port. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.38 | ColumnfcConnUnitPortStatLinkFailures | read-only | current | Count of link failures. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.39 | ColumnfcConnUnitPortStatInvalidCRC | read-only | current | Count of frames received with invalid CRC. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Loop ports should not count CRC errors passi… |
| 1.3.6.1.2.1.8888.1.3.1.1.40 | ColumnfcConnUnitPortStatInvalidTxWords | read-only | current | Count of invalid transmission words received at this port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channe… |
| 1.3.6.1.2.1.8888.1.3.1.1.41 | ColumnfcConnUnitPortStatPSPErrs | read-only | current | Count of primitive sequence protocol (PSP) errors detected at this port. This count is part of the Link Error Status Block (LESB) FC-PH 29.8). Note, this is a … |
| 1.3.6.1.2.1.8888.1.3.1.1.42 | ColumnfcConnUnitPortStatLossOfSignal | read-only | current | Count of instances of signal loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only … |
| 1.3.6.1.2.1.8888.1.3.1.1.43 | ColumnfcConnUnitPortStatLossOfSync | read-only | current | Count of instances of synchronization loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Chan… |
| 1.3.6.1.2.1.8888.1.3.1.1.44 | ColumnfcConnUnitPortStatInvOrderedSets | read-only | current | Count of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.3.1.1.45 | ColumnfcConnUnitPortStatFramesTooLong | read-only | current | Count of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of fram… |
| 1.3.6.1.2.1.8888.1.3.1.1.46 | ColumnfcConnUnitPortStatFramesTooShort | read-only | current | Count of frames received at this port where the frame length was less than the minimum indicated by the frame header - normally 24 bytes, but it could be more … |
| 1.3.6.1.2.1.8888.1.3.1.1.47 | ColumnfcConnUnitPortStatAddressErrs | read-only | current | Count of frames received with unknown addressing. e.g. unknown SID or DID. The SID or DID is not known to the routing algorithm. Note, this is a Fibre Channel … |
| 1.3.6.1.2.1.8888.1.3.1.1.48 | ColumnfcConnUnitPortStatDelimiterErrs | read-only | current | Count of invalid frame delimiters received at this port. An example is a frame with a class 2 start and and a class 3 at the end. Note, this is a Fibre Channel… |
| 1.3.6.1.2.1.8888.1.3.1.1.49 | ColumnfcConnUnitPortStatEncodingErrs | read-only | current | Count of disparity errors received at this port. Note, this is a Fibre Channel only stat. |
| 1.3.6.1.2.1.8888.1.4 | NodefcMgmtSNS | |||
| 1.3.6.1.2.1.8888.1.4.1 | TablefcConnUnitSnsTable | not-accessible | current | This table contains an entry for each object registered with this port in the switch. |
| 1.3.6.1.2.1.8888.1.4.1.1 | RowfcConnUnitSnsEntry | not-accessible | current | The Simple Name Server table for the port represented by fcConnUnitSnsPortName . |
| 1.3.6.1.2.1.8888.1.4.1.1.1 | ColumnfcConnUnitSnsPortIdentifier | read-only | current | The Port Identifier for this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.2 | ColumnfcConnUnitSnsPortName | read-only | current | The Port WWN for this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.3 | ColumnfcConnUnitSnsNodeName | read-only | current | The Node Name for this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.4 | ColumnfcConnUnitSnsClassOfSvc | read-only | current | The Classes of Service offered by this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.5 | ColumnfcConnUnitSnsNodeIPAddress | read-only | current | The IPv6 formatted address of the Node for this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.6 | ColumnfcConnUnitSnsProcAssoc | read-only | current | The Process Associator for this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.7 | ColumnfcConnUnitSnsFC4Type | read-only | current | The FC-4 Types supported by this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.8 | ColumnfcConnUnitSnsPortType | read-only | current | The Port Type of this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.9 | ColumnfcConnUnitSnsPortIPAddress | read-only | current | The IPv6 formatted address of this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.10 | ColumnfcConnUnitSnsFabricPortName | read-only | current | The Fabric Port name of this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.11 | ColumnfcConnUnitSnsHardAddress | read-only | current | The Hard ALPA of this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.12 | ColumnfcConnUnitSnsSymbolicPortName | read-only | current | The Symbolic Port Name of this entry in the SNS table. |
| 1.3.6.1.2.1.8888.1.4.1.1.13 | ColumnfcConnUnitSnsSymbolicNodeName | read-only | current | The Symbolic Node Name of this entry in the SNS table. |
| 1.3.6.1.2.1.8888.2 | NodefcMgmtConformance | |||
| 1.3.6.1.2.1.8888.2.1 | NodefcMgmtCompliances | |||
| 1.3.6.1.2.1.8888.2.1.1 | CompliancefcMgmtCompliance | current | The compliance statement for Fibre Channel entities which implement this MIB module. | |
| 1.3.6.1.2.1.8888.2.2 | NodefcMgmtGroups | |||
| 1.3.6.1.2.1.8888.2.2.1 | GroupfcConnUnitGroup | current | The collection of objects providing Fibre Channel connectivity unit instrumentation and control. | |
| 1.3.6.1.2.1.8888.2.2.2 | GroupfcCuEventGroup | current | The collection of objects providing Fibre Channel connectivity unit event information. | |
| 1.3.6.1.2.1.8888.2.2.3 | GroupfcCuLinkGroup | current | The collection of objects providing Fibre Channel connectivity unit link (topology) information. | |
| 1.3.6.1.2.1.8888.2.2.4 | GroupfcCuPortStatsGroup | current | The collection of objects providing Fibre Channel connectivity unit port statistics. | |
| 1.3.6.1.2.1.8888.2.2.5 | GroupfcCuSNSGroup | current | The collection of objects providing Fibre Channel connectivity unit simple name server information. | |
| 1.3.6.1.2.1.8888.2.2.6 | GroupfcCuTrapFiltersGroup | current | The collection of objects controlling SNMP notification (i.e., trap) destinations. | |
| 1.3.6.1.2.1.8888.2.2.7 | GroupfcCuNotificationsGroup | current | The set of SNMP notifications which an agent is required to implement. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FcEventSeverity | INTEGER { unknown (1), emergency (2), alert (3), critical (4), error (5), warning (6), notify (7), info (8), debug (9), mark (10) } | current | The set of values which define the event severity that will be logged by this connectivity unit. Values unknown (1) through debug (9) are essentially self-explanatory; mark (10) means that all messages are logged. |
| FcGlobalId | OCTET STRING (SIZE(16)) | current | Represents the Worldwide Name (WWN; IEEE 124-bit variety) associated with a Fibre Channel (FC) entity. |
| FcNameId | OCTET STRING (SIZE (8)) | current | Represents the Worldwide Name (WWN; IEEE 60-bit variety; standard part of T11 definitions for fibre channel) associated with a Fibre Channel (FC) entity. |
| FcPortFCClass | BITS { unknown (0), classF (1), class1 (2), class2 (3), class3 (4), class4 (5), class5 (6), class6 (7) } | current | Represents the class(es) of service represented on a given port, in a given operational context. |
| FcUnitType | INTEGER { unknown(1), other(2), hub(3), switch(4), gateway(5), converter(6), hba(7), proxyAgent(8), storageDevice(9), host(10), storageSubsystem(11), module(12), swDriver(13), storageAccessDevice(14) } | current | unknown (1) cannot be determined other (2) none of the following hub (3) passive connectivity unit supporting loop protocol. switch (4) active connectivity unit supporting multiple protocols. gateway (5) unit that conve… |