FOUNDRY-SN-MAC-VLAN-MIB
23 objects
Management Information Base module for MAC-based Vlan configuration and statistics.
Imported Objects
| IF-MIB | InterfaceIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.1.3.30 | IdentitysnMacVlan | Management Information Base module for MAC-based Vlan configuration and statistics. | ||
| 1.3.6.1.4.1.1991.1.1.3.30.1 | NodesnMacVlanGlobalObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.30.1.1 | ScalarsnMacVlanGlobalClearOper | read-write | current | valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear operational MAC-based Vlan entry for all ports. |
| 1.3.6.1.4.1.1991.1.1.3.30.1.2 | ScalarsnMacVlanGlobalDynConfigState | read-write | current | Enable/disable MAC-based VLAN dynamic activation on the global level. |
| 1.3.6.1.4.1.1991.1.1.3.30.2 | NodesnMacVlanTableObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.30.2.1 | TablesnMacVlanPortMemberTable | not-accessible | current | MAC-based Vlan port membership table. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.1.1 | RowsnMacVlanPortMemberEntry | not-accessible | current | An entry of the MAC-based Vlan port membership table. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.1.1.1 | ColumnsnMacVlanPortMemberVLanId | not-accessible | current | The VLAN identifier (VLAN ID). |
| 1.3.6.1.4.1.1991.1.1.3.30.2.1.1.2 | ColumnsnMacVlanPortMemberPortId | not-accessible | current | The ifIndex which is a member of the MAC-based VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.1.1.3 | ColumnsnMacVlanPortMemberRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.30.2.2 | TablesnMacVlanIfTable | not-accessible | current | MAC-based Vlan Interface table. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.2.1 | RowsnMacVlanIfEntry | not-accessible | current | An entry in the MAC-based Vlan interface table. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.1 | ColumnsnMacVlanIfIndex | not-accessible | current | The ifIndex which is a member of the MAC-based VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.2 | ColumnsnMacVlanIfEnable | read-write | current | The administrative status requested by management for MAC-based Vlan on this interface. The value enabled(1) indicates that MAC-based Vlan should be enabled on… |
| 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.3 | ColumnsnMacVlanIfMaxEntry | read-write | current | The maximum number of allowed and denied MAC address (static and dynamic) that can be leared on an interface. The default value is 2. The value should be betwe… |
| 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.4 | ColumnsnMacVlanIfClearOper | read-write | current | valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clearing operational MAC-based Vlan entry for a port. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.5 | ColumnsnMacVlanIfClearConfig | read-write | current | valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clearing configured MAC-based Vlan entry for a port. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.3 | TablesnMacBasedVlanTable | not-accessible | current | MAC-based Vlan table. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.3.1 | RowsnMacBasedVlanEntry | not-accessible | current | An entry in the MAC-based Vlan table. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.1 | ColumnsnMacBasedVlanId | not-accessible | current | The ID of a VLAN of which this port is a mac-vlan-permit member. Port must be untagged. This object return 0 which is an invalid VLAN ID value. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.2 | ColumnsnMacBasedVlanMac | not-accessible | current | A host source MAC address to be authenticated. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.3 | ColumnsnMacBasedVlanPriority | read-write | current | The priority of the source MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.4 | ColumnsnMacBasedVlanRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |