Fore-DS3-MIB
62 objects
This MIB module supports the FORE DS3 port module.
Imported Objects
| Fore-Common-MIB | asx |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.3 | IdentityforeDs3 | This MIB module supports the FORE DS3 port module. | ||
| 1.3.6.1.4.1.326.2.2.1.1.3.1 | Nodeds3ConfGroup | |||
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1 | Tableds3ConfTable | not-accessible | current | A table of DS3 switch port configuration information. |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1 | Rowds3ConfEntry | not-accessible | current | A table entry containing DS3 configuration information for each port. Not all RFC1407 configuration table variables are included, and some are modified. |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.1 | Columnds3ConfBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.2 | Columnds3ConfModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.3 | Columnds3ConfPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.4 | Columnds3LineType | read-write | current | This variable indicates the variety of DS3 C-bit application implementing this interface. The type of interface affects the interpretation of the usage and err… |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.5 | Columnds3LineCoding | read-only | current | This variable describes the variety of Zero Code suppression used on this interface, which in turn affects a number of its characteristics. ds3B3ZS (2) refers … |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.6 | Columnds3SendCode | read-write | current | This variable indicates what type of code is being sent across the DS3/E3 interface by the device. The values mean: ds3SendNoCode sending looped or normal data… |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.7 | Columnds3ReceiveCode | read-only | current | This variable indicates the type of code that was received across the DS3/E3 interface. The values mean: ds3ReceiveNoCode receiving looped or normal data ds3Re… |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.8 | Columnds3LoopbackConfig | read-write | current | This variable represents the loopback configuration of the DS3 interface. This variable is defined in the rfc1407 configuration table as dsx3LoopbackConfig, wi… |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.9 | Columnds3TxClockSource | read-write | current | The source of the transmit clock. |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.10 | Columnds3RxScrambling | read-write | current | This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting side. |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.11 | Columnds3TxScrambling | read-write | current | This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the same as the receiving side. |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.12 | Columnds3LineStatus | read-only | current | This variable indicates the Line Status of the interface. A similar object is defined in the rfc1407 configuration table as dsx3LineStatus (the ds3RxFERF bit i… |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.13 | Columnds3IdleUnassignedCells | read-write | current | This variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum, Unassigned cells should be se… |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.14 | Columnds3LineTypeFraming | read-write | current | This variable indicates the way ATM cells are constructed from the DS3 stream. ds3Hcs(1) indicates that the ATM cells are constructed upon the Header Check Seq… |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.15 | Columnds3LineLength | read-write | current | This variable represents the length of the physical cable connected to the ds3 port. The user has to set this object to match the physical cable in order to ge… |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.16 | Columnds3PbitPErrThrSeconds | read-write | current | This variable represents the consecutive number of BAD/GOOD seconds to detect/clear an Excessive P-bit Parity Error Defect. The range of values it can take is … |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.17 | Columnds3PbitPErrThrErrors | read-write | current | This variable is a threshold for the number of P-bit Parity Errors per second and is used as a parameter to the Excessive P-bit Parity Error Defect. If the num… |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.18 | Columnds3PbitPErrFailEnable | read-write | current | This variable controls whether declaration of an Excessive P-bit Parity Error Defect forces the port's operState to Down. |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.19 | Columnds3SigFailBer | read-write | current | This is the exponent of 10 for the current signal fail bit error rate (BER) threshold for this port. The value -4, for example, represents a BER of 1E-4. This … |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.20 | Columnds3SigDegradeBer | read-write | current | This is the exponent of 10 for the current signal degrade bit error rate (BER) threshold for this port. The value -8, for example, represents a BER of 1E-8. Th… |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.21 | Columnds3BerErrorModel | read-write | current | This is the error distribution model to be used to identify signal degrade and signal fail conditions. errorModelRandom selects a random error distribution and… |
| 1.3.6.1.4.1.326.2.2.1.1.3.1.1.1.22 | Columnds3BerState | read-only | current | This value describes the current state of the port as determined through bit error rate analysis. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2 | Nodeds3StatsGroup | |||
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1 | Tableds3FramingTable | not-accessible | current | A table of DS3 framing statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1 | Rowds3FramingEntry | not-accessible | current | A table entry containing DS3 framing statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.1 | Columnds3FramingBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.2 | Columnds3FramingModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.3 | Columnds3FramingPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.4 | Columnds3FramingLOSs | read-only | current | The number of seconds in which Loss Of Signal (LOS) errors were detected by the DS3 Receive Framer block. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.5 | Columnds3FramingLCVs | read-only | current | The number of Line Code Violations (LCV) that were detected by the DS3 Receive Framer block. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.6 | Columnds3FramingSumLCVs | read-only | current | The number of DS3 information blocks (85 bits) which contain one or more Line Code Violations (LCV). |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.7 | Columnds3FramingFERRs | read-only | current | Number of DS3 framing error (FERR) events. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.8 | Columnds3FramingOOFs | read-only | current | Number of seconds DS3 Out Of Frame (OOF) error events were experienced. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.9 | Columnds3FramingFERFs | read-only | current | The number of seconds in which Far End Receive Failure (FERF) state has been detected by the DS3 Receive Framer block. FERF signal alerts the upstream terminal… |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.10 | Columnds3FramingAISs | read-only | current | The number of seconds in which Alarm Indication Signals (AIS) were detected by the DS3 Receive Framer block. AIS indicates that an upstream failure has been de… |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.11 | Columnds3FramingPbitPERRs | read-only | current | Number of P-bit parity error (PERR) events. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.12 | Columnds3FramingCbitPERRs | read-only | current | Number of C-bit parity error (PERR) events. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.13 | Columnds3FramingFEBEs | read-only | current | Number of DS3 far end block error (FEBE) events. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.1.1.14 | Columnds3FramingIDLEs | read-only | current | The number of seconds in which IDLE signal was detected by the DS3 Receive Framer block. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2 | Tableds3PlcpTable | not-accessible | current | A table of DS3 Physical Layer Convergence Protocol (Procedure) statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1 | Rowds3PlcpEntry | not-accessible | current | A table entry containing DS3 PLCP statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.1 | Columnds3PlcpBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.2 | Columnds3PlcpModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.3 | Columnds3PlcpPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.4 | Columnds3PlcpFERRs | read-only | current | Number of Physical Layer Convergence Protocol (PLCP) octet error events. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.5 | Columnds3PlcpLOFs | read-only | current | The number of seconds in which Loss Of Frame (LOF) errors were detected by the PLCP (Physical Layer Convergence Protocol) receiver. LOF is declared when an Out… |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.6 | Columnds3PlcpBIP8s | read-only | current | Number of BIP-8 (Bit Interleaved Parity - 8) error events. The BIP-8 is calculated over the Path Overhead field and the associated ATM cell of the previous fra… |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.7 | Columnds3PlcpFEBEs | read-only | current | Number of ATM Far End Block Error (FEBE) events. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.8 | Columnds3PlcpYellows | read-only | current | The number of seconds in which Yellow alarm errors were detected by the PLCP (Physical Layer Convergence Protocol) receiver. Yellow alarm is asserted when 10 c… |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.3 | Tableds3AtmTable | not-accessible | current | A table of DS3 ATM statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.3.1 | Rowds3AtmEntry | not-accessible | current | A table entry containing DS3 ATM statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.3.1.1 | Columnds3AtmBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.3.1.2 | Columnds3AtmModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.3.1.3 | Columnds3AtmPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.3.1.4 | Columnds3AtmHCSs | read-only | current | Number of header check sequence (HCS) error events. The HCS is a CRC-8 calculation over the first 4 octets of the ATM cell header. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.3.1.5 | Columnds3AtmRxCells | read-only | current | Number of ATM cells that were received. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.3.1.6 | Columnds3AtmTxCells | read-only | current | Number of non-null ATM cells that were transmitted. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.3.1.7 | Columnds3AtmLCDs | read-only | current | The number of seconds in which Loss of Cell Delineation (LCD) has occurred. An LCD defect is detected when an out of cell delination state has persisted for 4m… |