MIB Viewer

Fore-DSX1-MIB

34 objects
MIB module for supporting the DSX1 port module.
Imported Objects
Fore-Common-MIBasx
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.4.1.326.2.2.1.1.10IdentityforeDsx1MIB module for supporting the DSX1 port module.
1.3.6.1.4.1.326.2.2.1.1.10.1Nodedsx1ForeConfGroup
1.3.6.1.4.1.326.2.2.1.1.10.1.1Tabledsx1ForeConfTablenot-accessiblecurrentA table of DSX1 switch port configuration information.
1.3.6.1.4.1.326.2.2.1.1.10.1.1.1Rowdsx1ForeConfEntrynot-accessiblecurrentA table entry containing DSX1 configuration information for each port. Not all RFC1406 configuration table variables are included, and some are modified.
1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.1Columndsx1ForeLineIndexread-onlycurrentThis object is the identifier of a DS1 Inter- face on a managed device. If there is an ifEn- try that is directly associated with this and only this DS1 interf…
1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.2Columndsx1ForeReceiveCoderead-onlycurrentThis variable indicates the type of code that was received across the DSX interface. The values mean: dsx1ReceiveNoCode receiving looped or normal data dsx1Rec…
1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.3Columndsx1ForeLineLengthread-writecurrentThis variable represents the length of the physical cable connected to the dsx1 port. The user has to set this object to match the physical cable in order to g…
1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.4Columndsx1ForeFdlConfigurationread-writecurrentThis varialbe indicate whether the FDL state machine acts as network or user side
1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.5Columndsx1ForeLineImpedanceread-writedeprecatedThe default line impedance of the E1 line. Note that this is not applicable for T1
1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.6Columndsx1ForeFdlPerfConfread-writecurrentThis variable indicate whether the FDL state machine is enabled or turned off for performance reports. See T1.403 for details.
1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.7Columndsx1ForeFdlBomConfread-writecurrentThis variable indicate whether Bit Oriented Messages will be generated and transmitted. See T1.403 for details.
1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.8Columndsx1ForeUpStreamAISread-writecurrentThe upsteam AIS alarm generation flag enabled: the upstream AIS is generated disabled: the upstream AIS is not generated
1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.9Columndsx1ForePortModelread-onlycurrentThe underlying hardware port model. The value corresponds to the hwPortModel mib variable.
1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.10Columndsx1ForeAdminStatusread-writecurrentThe desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces…
1.3.6.1.4.1.326.2.2.1.1.10.2Nodedsx1ForeStatsGroup
1.3.6.1.4.1.326.2.2.1.1.10.2.1Tabledsx1ForeFramingTablenot-accessiblecurrentA table of DSX1 framing statistics information.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1Rowdsx1ForeFramingEntrynot-accessiblecurrentA table entry containing DSX1 framing statistics information.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.1Columndsx1ForeFramingIndexread-onlycurrentThe number of this port.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.2Columndsx1ForeFramingLOSsread-onlycurrentThe number of secondsx in which Loss Of Signal (LOS) errors have been detected.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.3Columndsx1ForeFramingLCVsread-onlycurrentThe number of Line Code Violations (LCV) that have been detected.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.4Columndsx1ForeFramingFERRsread-onlycurrentThe number of Framing ERRor (FERR) events that have been detected.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.5Columndsx1ForeFramingOOFsread-onlycurrentThe number of Out Of Frame (OOF) error events that have been detected.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.6Columndsx1ForeFramingAISsread-onlycurrentThe number of secondsx in which Alarm Indication Signals (AIS) have been detected. AIS indicates that an upstream failure has been detected by the far end.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.7Columndsx1ForeFramingB8ZSPatternsread-onlycurrentThe number of seconds in which B8ZS Pattern events have been detected.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.8Columndsx1ForeFraming8Zerosread-onlycurrentThe number of seconds in which 8 Zeros events have been detected.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.9Columndsx1ForeFraming16Zerosread-onlycurrentThe number of seconds in which 16 Zeros events have been detected.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.10Columndsx1ForeFramingYellowAlarmsread-onlycurrentThe number of secondsx in which Yellow Alarm events have been detected.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.11Columndsx1ForeFramingRedAlarmsread-onlycurrentThe number of secondsx in which Red Alarm events have been detected.
1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.12Columndsx1ForeFramingBEEsread-onlycurrentThe number of Bit Encoding Error (BEE) events that have been detected.
1.3.6.1.4.1.326.2.2.1.1.10.2.2Tabledsx1ForeAtmTablenot-accessiblecurrentA table of DSX1 ATM statistics information.
1.3.6.1.4.1.326.2.2.1.1.10.2.2.1Rowdsx1ForeAtmEntrynot-accessiblecurrentA table entry containing DSX1 ATM statistics information.
1.3.6.1.4.1.326.2.2.1.1.10.2.2.1.1Columndsx1ForeAtmIndexread-onlycurrentThe ifIndex of this port, actually it's currently the ifIndex of the associaated dsx1 port not the ATM port as currently they are assumed to be the same thing …
1.3.6.1.4.1.326.2.2.1.1.10.2.2.1.2Columndsx1ForeAtmRxCellsread-onlycurrentNumber of ATM cells that were received.
1.3.6.1.4.1.326.2.2.1.1.10.2.2.1.3Columndsx1ForeAtmTxCellsread-onlycurrentNumber of non-null ATM cells that were transmitted.