MIB Viewer

Fore-DSX3-Ext-MIB

40 objects
This mib module implements extensions to the standard DS3 mib to support extra configuration, statistics, and diagnostic capabilities of Fore Systems equipment.
Imported Objects
DS3-MIBdsx3LineIndex
Fore-Common-MIBasx
Fore-TrapLog-MIBtrapLogIndex
IF-MIBifName
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.4.1.326.2.2.1.1.15IdentityforeDsx3MibThis mib module implements extensions to the standard DS3 mib to support extra configuration, statistics, and diagnostic capabilities of Fore Systems equipment.
1.3.6.1.4.1.326.2.2.1.1.15.0.1NotificationforeDsx3LOFDetectedcurrentThis trap indicates that Loss Of Frame(LOF) is detected on the incoming signal.
1.3.6.1.4.1.326.2.2.1.1.15.0.2NotificationforeDsx3LOFClearedcurrentThis trap indicates that Loss Of Frame is cleared on the incoming signal.
1.3.6.1.4.1.326.2.2.1.1.15.0.3NotificationforeDsx3AISDetectedcurrentThis trap indicates that AIS Alarm is detected on the incoming signal.
1.3.6.1.4.1.326.2.2.1.1.15.0.4NotificationforeDsx3AISClearedcurrentThis trap indicates that AIS Alarm is cleared on the incoming signal.
1.3.6.1.4.1.326.2.2.1.1.15.0.5NotificationforeDsx3FERFDetectedcurrentThis trap indicates that FERF Alarm or DS3 Yellow Alarm is detected on the incoming signal.
1.3.6.1.4.1.326.2.2.1.1.15.0.6NotificationforeDsx3FERFClearedcurrentThis trap indicates that FERF Alarm or DS3 Yellow Alarm is cleared on the incoming signal.
1.3.6.1.4.1.326.2.2.1.1.15.0.7NotificationforeDsx3LOSDetectedcurrentThis trap indicates that the specified DS3 port has detected incoming LOS Alarm.
1.3.6.1.4.1.326.2.2.1.1.15.0.8NotificationforeDsx3LOSClearedcurrentThis trap indicates that the incoming LOS Alarm has been cleared on the specified DS3 port.
1.3.6.1.4.1.326.2.2.1.1.15.0.9NotificationforeDsx3IdleDetectedcurrentThis trap indicates that an Idle Maintenance Signal (IDLE) is detected on the incoming signal.
1.3.6.1.4.1.326.2.2.1.1.15.0.10NotificationforeDsx3IdleClearedcurrentThis trap indicates that an Idle Maintenance Signal (IDLE) is cleared on the incoming signal.
1.3.6.1.4.1.326.2.2.1.1.15.0.11NotificationforeDsx3TrailChangeDetectedcurrentThis trap indicates that a Trail Trace Mismatch was detected on the incoming signal.
1.3.6.1.4.1.326.2.2.1.1.15.0.12NotificationforeDsx3PbitPerrDetectedcurrentThis trap indicates that the specified DSX3 port is experiencing P-bit Parity errors. A P-bit Parity Error failure is declared when the P-bit Parity Error pers…
1.3.6.1.4.1.326.2.2.1.1.15.0.13NotificationforeDsx3PbitPerrClearedcurrentThis trap indicates that the P-bit Parity Error failure identified by trap asxDS3PbitPerrDetected has been cleared. A P-bit Parity Error failure is cleared whe…
1.3.6.1.4.1.326.2.2.1.1.15.1TableforeDsx3ConfigTablenot-accessiblecurrentA table of configuration options, statistics, and diagnostics supported by DS3 interfaces on Fore Systems ATM Switches.
1.3.6.1.4.1.326.2.2.1.1.15.1.1RowforeDsx3ConfigEntrynot-accessiblecurrentA table entry containing Fore specific extensions to the standard DS3 MIB tables.
1.3.6.1.4.1.326.2.2.1.1.15.1.1.1ColumnforeDsx3ConfigReceiveCoderead-onlycurrentThis variable indicates the type of code that was received across the DS3/E3 interface. The values mean: ds3ReceiveNoCode receiving looped or normal data ds3Re…
1.3.6.1.4.1.326.2.2.1.1.15.1.1.2ColumnforeDsx3ConfigLineLengthread-writecurrentThis variable represents the length of the physical cable connected to the ds3 port. The user has to set this object to match the physical cable in order to ge…
1.3.6.1.4.1.326.2.2.1.1.15.1.1.3ColumnforeDsx3ConfigStatusread-onlycurrentThis variable represents the current status of the Dsx3 interface. This variable is a bit map represented as a sum. The various bit positions are: 1 dsx3NoDefe…
1.3.6.1.4.1.326.2.2.1.1.15.1.1.4ColumnforeDsx3LineTypeFramingread-onlycurrentThis variable extends the 'dsx3LineType' variable from rfc1407. When dsx3LineType == e3Framed, this variable determines whether G.751 or G.832 framing is used.…
1.3.6.1.4.1.326.2.2.1.1.15.1.1.5ColumnforeDsx3PbitPerrThrSecondsread-writecurrentThis variable represents the consecutive number of BAD/GOOD seconds to detect/clear an Excessive P-bit Parity Error Defect. The range of values it can take is …
1.3.6.1.4.1.326.2.2.1.1.15.1.1.6ColumnforeDsx3PbitPerrThrErrorsread-writecurrentThis variable is a threshold for the number of P-bit Parity Errors per second and is used as a parameter to the Excessive P-bit Parity Error Defect. If the num…
1.3.6.1.4.1.326.2.2.1.1.15.1.1.7ColumnforeDsx3PbitPerrFailEnableread-writecurrentThis variable controls whether declaration of an Excessive P-bit Parity Error Defect forces the port's operState to Down.
1.3.6.1.4.1.326.2.2.1.1.15.1.1.8ColumnforeDsx3SignalDegradeBerread-writecurrentThis is the exponent of 10 for the current signal degrade bit error rate (BER) threshold for this port. The value -7, for example, represents a BER of 1E-7. Th…
1.3.6.1.4.1.326.2.2.1.1.15.1.1.9ColumnforeDsx3SignalFailBerread-writecurrentThis is the exponent of 10 for the current signal fail bit error rate (BER) threshold for this port. The value -4, for example, represents a BER of 1E-4. This …
1.3.6.1.4.1.326.2.2.1.1.15.1.1.10ColumnforeDsx3BerErrorModelread-writecurrentThis is the error distribution model to be used to identify signal degrade and signal fail conditions. errorModelRandom selects a random error distribution and…
1.3.6.1.4.1.326.2.2.1.1.15.1.1.11ColumnforeDsx3BerStateread-onlycurrentThis value describes the current state of the port as determined through bit error rate analysis.
1.3.6.1.4.1.326.2.2.1.1.15.2TableforeDsx3TotalTablenot-accessiblecurrentA table of statistics, supported by DS3 interfaces on Fore Systems Equipment.
1.3.6.1.4.1.326.2.2.1.1.15.2.1RowforeDsx3TotalEntrynot-accessiblecurrentA table entry containing Fore specific extensions to the standard DS3 MIB tables.
1.3.6.1.4.1.326.2.2.1.1.15.2.1.1ColumnforeDsx3TotalFramingLOSsread-onlycurrentThe number of seconds in which Loss Of Signal (LOS) errors were detected by the DS3 Receive Framer block.
1.3.6.1.4.1.326.2.2.1.1.15.2.1.2ColumnforeDsx3TotalFramingLCVsread-onlycurrentThe number of Line Code Violations (LCV) that were detected by the DS3 Receive Framer block.
1.3.6.1.4.1.326.2.2.1.1.15.2.1.3ColumnforeDsx3TotalFramingSumLCVsread-onlycurrentThe number of DS3 information blocks (85 bits) which contain one or more Line Code Violations (LCV).
1.3.6.1.4.1.326.2.2.1.1.15.2.1.4ColumnforeDsx3TotalFramingFERRsread-onlycurrentNumber of DS3 framing error (FERR) events.
1.3.6.1.4.1.326.2.2.1.1.15.2.1.5ColumnforeDsx3TotalFramingOOFsread-onlycurrentNumber of seconds DS3 Out Of Frame (OOF) error events were experienced.
1.3.6.1.4.1.326.2.2.1.1.15.2.1.6ColumnforeDsx3TotalFramingFERFsread-onlycurrentThe number of seconds in which Far End Receive Failure (FERF) state has been detected by the DS3 Receive Framer block. FERF signal alerts the upstream terminal…
1.3.6.1.4.1.326.2.2.1.1.15.2.1.7ColumnforeDsx3TotalFramingAISsread-onlycurrentThe number of seconds in which Alarm Indication Signals (AIS) were detected by the DS3 Receive Framer block. AIS indicates that an upstream failure has been de…
1.3.6.1.4.1.326.2.2.1.1.15.2.1.8ColumnforeDsx3TotalFramingPbitPERRsread-onlycurrentNumber of P-bit parity error (PERR) events or the number of BIP-8 errors in case of E3 G.832.
1.3.6.1.4.1.326.2.2.1.1.15.2.1.9ColumnforeDsx3TotalFramingCbitPERRsread-onlycurrentNumber of C-bit parity error (PERR) events.
1.3.6.1.4.1.326.2.2.1.1.15.2.1.10ColumnforeDsx3TotalFramingFEBEsread-onlycurrentNumber of DS3 far end block error (FEBE) events.
1.3.6.1.4.1.326.2.2.1.1.15.2.1.11ColumnforeDsx3TotalFramingIDLEsread-onlycurrentThe number of seconds in which IDLE signal was detected by the DS3 Receive Framer block.