Fore-E1-MIB
56 objects
This mib implements management tables for the E1 port module.
Imported Objects
| Fore-Common-MIB | asx |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.8 | IdentityforeE1 | This mib implements management tables for the E1 port module. | ||
| 1.3.6.1.4.1.326.2.2.1.1.8.1 | Nodee1ConfGroup | |||
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1 | Tablee1ConfTable | not-accessible | current | A table of E1 switch port configuration information. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1 | Rowe1ConfEntry | not-accessible | current | A table entry containing E1 configuration information for each port. Not all RFC1406 configuration table variables are included, and some are modified. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.1 | Columne1ConfBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.2 | Columne1ConfModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.3 | Columne1ConfPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.4 | Columne1LineType | read-only | current | This variable indicates the variety of E1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reason… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.5 | Columne1LineCoding | read-only | current | This variable describes the variety of Zero Code suppression used on this link, which in turn affects a number of its characteristics. e1AMI(3) refers to a mod… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.6 | Columne1SendCode | read-only | current | This variable indicates what type of code is being sent across the E1 interface by the device. The values mean: e1SendNoCode sending looped or normal data e1Se… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.7 | Columne1ReceiveCode | read-only | current | This variable indicates the type of code that was received across the E1 interface. The values mean: e1ReceiveNoCode receiving looped or normal data e1ReceiveL… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.8 | Columne1LoopbackConfig | read-write | current | This variable represents the loopback configuration of the E1 interface. This variable is defined in the rfc1406 configuration table as dsx1LoopbackConfig, wit… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.9 | Columne1TxClockSource | read-write | current | The source of the transmit clock. rxTiming(1) indicated that the recovered receive clock is used as the transmit clock. localTiming(2) indicates that a local s… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.10 | Columne1LineStatus | read-only | current | This variable indicates the Line Status of the interface. A similar object is defined in the rfc1406 configuration table as dsx1LineStatus. The variable contai… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.11 | Columne1IdleUnassignedCells | read-write | current | This variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum, Unassigned cells should be se… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.12 | Columne1LineLength | read-write | current | This variable represents the length of the physical cable connected to the e1 port. The user has to set this object to match the physical cable in order to get… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.13 | Columne1LineTypeFraming | read-write | current | This variable indicates the way ATM cells are constructed from the E1 stream. e1Hcs(2) indicates that the ATM cells are constructed upon the Header Check Seque… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.14 | Columne1RxScrambling | read-write | current | This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting side. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.15 | Columne1TxScrambling | read-write | current | This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the same as the receiving side. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2 | Nodee1StatsGroup | |||
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1 | Tablee1FramingTable | not-accessible | current | A table of E1 framing statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1 | Rowe1FramingEntry | not-accessible | current | A table entry containing E1 framing statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.1 | Columne1FramingBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.2 | Columne1FramingModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.3 | Columne1FramingPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.4 | Columne1FramingLCVs | read-only | current | The number of Line Code Violations (LCV) that were detected by the E1 Receive Framer block. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.5 | Columne1FramingFERRs | read-only | current | Number of E1 framing error (FERR) events. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.6 | Columne1FramingFEBEs | read-only | current | Number of E1 far end block errors. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.7 | Columne1FramingCRCs | read-only | current | The number cyclic redundancy errors. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.8 | Columne1FramingOOFs | read-only | current | Number of seconds when OOF (loss of basic frame alignment) errors were detected. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.9 | Columne1FramingLOSs | read-only | current | Number of seconds when LOS (loss of signal) error events were experienced. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.10 | Columne1FramingAISs | read-only | current | Number of seconds when AIS (alarm indication signal) error events were experienced. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.11 | Columne1FramingAISDs | read-only | current | Number of seconds when AISD (unframed pattern of all ones) error events were experienced. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.12 | Columne1FramingRedAlarms | read-only | current | Number of seconds when Red Alarm events were experienced. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.1.1.13 | Columne1FramingYellowAlarms | read-only | current | Number of seconds when Yellow Alarm events were experienced. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.2 | Tablee1PlcpTable | not-accessible | current | A table of E1 Physical Layer Convergence Protocol (Procedure) statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.2.1 | Rowe1PlcpEntry | not-accessible | current | A table entry containing E1 PLCP statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.2.1.1 | Columne1PlcpBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.2.1.2 | Columne1PlcpModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.2.1.3 | Columne1PlcpPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.2.1.4 | Columne1PlcpBIP8s | read-only | current | Number of BIP-8 (Bit Interleaved Parity - 8) error events. The BIP-8 is calculated over the Path Overhead field and the associated ATM cell of the previous fra… |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.2.1.5 | Columne1PlcpFERRs | read-only | current | Number of Physical Layer Convergence Protocol (PLCP) octet error events. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.2.1.6 | Columne1PlcpFEBEs | read-only | current | Number of ATM Far End Block Error (FEBE) events. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.2.1.7 | Columne1PlcpLOFs | read-only | current | The number of seconds in which Loss Of Frame (LOF) errors were detected by the PLCP (Physical Layer Convergence Protocol) receiver. LOF is declared when an Out… |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.2.1.8 | Columne1PlcpYellows | read-only | current | The number of seconds in which Yellow alarm errors were detected by the PLCP (Physical Layer Convergence Protocol) receiver. Yellow alarm is asserted when 10 c… |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.3 | Tablee1AtmTable | not-accessible | current | A table of E1 ATM statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.3.1 | Rowe1AtmEntry | not-accessible | current | A table entry containing E1 ATM statistics information. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.3.1.1 | Columne1AtmBoard | read-only | current | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.3.1.2 | Columne1AtmModule | read-only | current | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.3.1.3 | Columne1AtmPort | read-only | current | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.3.1.4 | Columne1AtmHCSs | read-only | current | Number of header check sequence (HCS) error events. The HCS is a CRC-8 calculation over the first 4 octets of the ATM cell header. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.3.1.5 | Columne1AtmRxCells | read-only | current | Number of ATM cells that were received. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.3.1.6 | Columne1AtmTxCells | read-only | current | Number of non-null ATM cells that were transmitted. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.3.1.7 | Columne1AtmUHCSs | read-only | current | Number of uncorrectable header check sequence (HCS) error events. The HCS is a CRC-8 calculation over the first 4 octets of the ATM cell header. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.3.1.8 | Columne1AtmCHCSs | read-only | current | Number of correctable header check sequence (HCS) error events. The HCS is a CRC-8 calculation over the first 4 octets of the ATM cell header. |
| 1.3.6.1.4.1.326.2.2.1.1.8.2.3.1.9 | Columne1AtmLCDs | read-only | current | The number of seconds in which Loss of Cell Delineation (LCD) has occurred. An LCD defect is detected when an out of cell delination state has persisted for 4m… |