Fore-TCM-MIB
196 objects
The Timing Control Module (TCM).
Imported Objects
| Fore-Common-MIB | atmSwitch EntryStatus hardware |
| Fore-TrapLog-MIB | trapLogIndex |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime DisplayString PhysAddress TimeInterval |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.0.1050 | NotificationecpOperatingModeChange | current | This trap indicates that the Extended Control Processor (ECP) has change operating state. | |
| 1.3.6.1.4.1.326.2.2.0.1051 | NotificationesiTimingSourceChange | current | This trap is generated whenever the External Synchronization Interface (ESI) timing source (esiCurrentTimingRef) is changed either manually or by the system du… | |
| 1.3.6.1.4.1.326.2.2.0.1052 | NotificationesiTimingSourceFailed | current | This trap is generated whenever the External Synchronization Interface (ESI) timing source (esiCurrentTimingRef) fails. | |
| 1.3.6.1.4.1.326.2.2.0.1076 | NotificationecpStandbyFailed | current | This trap is generated whenever the Standby Timing Control Module (TCM) appears to haved failed. This is determined by lack of response from it. | |
| 1.3.6.1.4.1.326.2.2.1.7 | IdentityecpStationModule | The Timing Control Module (TCM). | ||
| 1.3.6.1.4.1.326.2.2.1.7.1 | NodeecpHardware | |||
| 1.3.6.1.4.1.326.2.2.1.7.1.1 | TableecpBoardTable | not-accessible | current | This table contains Extended Control Processor (ECP) board information. |
| 1.3.6.1.4.1.326.2.2.1.7.1.1.1 | RowecpBoardEntry | not-accessible | current | This entry contains Extended Control Processor (ECP) board information |
| 1.3.6.1.4.1.326.2.2.1.7.1.1.1.1 | ColumnecpBoardIndex | read-only | current | This is the Extended Control Processor board index within the management station. |
| 1.3.6.1.4.1.326.2.2.1.7.1.1.1.2 | ColumnecpBoardVersion | read-only | current | This is the version number of this Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.1.1.3 | ColumnecpBoardSerialNumber | read-only | current | This is the serial number of this Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.1.1.4 | ColumnecpBoardOtherEcpPresent | read-only | current | This is the other ECP board present indicator for this Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.1.1.5 | ColumnecpBoardEsiPresent | read-only | current | This is the External Synchronization Interface (ESI) present indicator for this Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.2 | TableecpSerialIfTable | not-accessible | current | This table contains the serial port interface information for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.2.1 | RowecpSerialIfEntry | not-accessible | current | This entry contains the serial port interface information for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.2.1.1 | ColumnecpSerialIfPortIndex | read-only | current | This is the serial port interface index for this port on the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.2.1.2 | ColumnecpSerialIfPortType | read-only | current | This is the serial port interface type for this port on the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.2.1.3 | ColumnecpSerialIfPortSpeed | read-only | current | This is the serial port interface speed for this port on the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.2.1.4 | ColumnecpSerialIfFlowType | read-only | current | This is the serial port interface flow control for this port on the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.2.1.5 | ColumnecpSerialIfPortBits | read-only | current | This is the serial port interface character size for this port on the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.2.1.6 | ColumnecpSerialIfPortStopBits | read-only | current | This is the serial port interface stop bit count for this port on the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.2.1.7 | ColumnecpSerialIfPortParity | read-only | current | This is the serial port interface character parity for this port on the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.3 | NodeecpEnvironment | |||
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1 | NodeecpAlarmGroup | |||
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.1 | TableecpAlarmTable | not-accessible | current | A table of switch alarm definitions and configuration. |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1 | RowecpAlarmEntry | not-accessible | current | A table entry containing switch alarm definitions. |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1.1 | ColumnecpAlarmType | read-only | current | The type of the alarm. |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1.2 | ColumnecpAlarmStatus | read-only | current | The status of this alarm entry. An alarm becomes active if the underlying condition is detected. For power supplies, the input failed alarm condition is assert… |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1.3 | ColumnecpAlarmMinorCategory | read-write | current | This object indicates whether a minor alarm is triggered when this event occurs. |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1.4 | ColumnecpAlarmMajorCategory | read-write | current | This object indicates whether a major alarm is triggered when this event occurs. |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.1.1.5 | ColumnecpAlarmReset | read-write | current | The manager may set this to the value zero to cancel a current alarm. This is useful for silencing alarms triggered via edge detection. If this variable is rea… |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.2 | ScalarecpAlarmMajorRelayState | read-only | current | This object indicates the current state of the major alarm relay. If one or more of the alarms (ecpAlarmType) that are defined major (ecpAlarmMajorCategory) ar… |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.3 | ScalarecpAlarmMinorRelayState | read-only | current | This object indicates the current state of the minor alarm relay. Ifone or mote of the alarms (ecpAlarmType) that are defined minor (ecpAlarmMinorCategory) are… |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.4 | TableecpAlarmRelayTable | not-accessible | current | This table contains the alarm relay definitions for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.4.1 | RowecpAlarmRelayEntry | not-accessible | current | This entry contains the alarm relay definitions for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.4.1.1 | ColumnecpAlarmRelayIndex | read-only | current | This is the index of the alarm relay on the Extended Control Processor (ECP). The Raven ECP has 5 addressable alarm relays (1-5). |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.4.1.2 | ColumnecpAlarmRelayFunction | read-write | current | This is the alarm function associated with an alarm relay on the Extended Control Processor (ECP). An alarm relay may either be unused, assigned to the major a… |
| 1.3.6.1.4.1.326.2.2.1.7.1.3.1.4.1.3 | ColumnecpAlarmRelayState | read-only | current | This is the current state of the alarm relay on the Extended Control Processor (ECP). The state 'on' means that the alarm relay is activated; the state 'off' m… |
| 1.3.6.1.4.1.326.2.2.1.7.2 | NodeecpSoftware | |||
| 1.3.6.1.4.1.326.2.2.1.7.2.1 | NodeecpSwMainGroup | |||
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1 | TableecpSwMainTable | not-accessible | current | The table contains the Extended Control Processor (ECP) information maintained by the control software. |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1 | RowecpSwMainEntry | not-accessible | current | This entry contains the Extended Control Processor (ECP) information maintained by the control software. |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.1 | ColumnecpName | read-write | current | This is the system name of this Extended Control Processor (ECP) platform. |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.2 | ColumnecpHardwareVersion | read-only | current | This is the hardware version of the Extended Control Processor (ECP) platform. |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.3 | ColumnecpSoftwareVersion | read-only | current | This is the software version of the Extended Control Processor (ECP) control software. The version is encoded into 6 hex characters. Version 1.2.3 would be 0x0… |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.4 | ColumnecpSoftwareVersionText | read-only | current | This is the software version text of the Extended Control Processor (ECP) control software. This object contains information regarding the software configurati… |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.5 | ColumnecpType | read-only | current | This is the type of the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.6 | ColumnecpOperatingStatus | read-only | current | This is the software status of this Extended Control Processor (ECP). |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.7 | ColumnecpProtocolType | read-write | current | The transfer protocol that is used when upgrading the software, saving/restoring the CDB, etc. on this Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.8 | ColumnecpTimeZone | read-write | current | The TimeZone configured for this Extended Control Processor (ECP). This variable follows the POSIX standard 1003.1-1988 for the format of the TZ environment va… |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.9 | ColumnecpGMTime | read-write | current | The Extended Control Processor's (ECP's) notion of Greenwich Mean Time. Linked to hrSystemDate. Offset part of time spec, if supplied, is considered an error. |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.10 | ColumnecpUptime | read-only | current | This is the amount of time that the Extended Control Processor (ECP) control software has been running, in hundredths of a second. |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.11 | ColumnecpModeChangeTime | read-only | current | This is the time that the Extended Control Processor (ECP) control software has switched to the current operating mode. |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.12 | ColumnecpOtherEcpStatus | read-only | current | This is the software status of the other Extended Control Processor (ECP) from the viewpoint of this ECP. |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.13 | ColumnecpExternalInput1 | read-only | current | This is the state of External Input #1 from the viewpoint of the Extended Control Processor (ECP). |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.14 | ColumnecpExternalInput2 | read-only | current | This is the state of External Input #2 from the viewpoint of the Extended Control Processor (ECP). |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.15 | ColumnecpExternalInput3 | read-only | current | This is the state of External Input #3 from the viewpoint of the Extended Control Processor (ECP). |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.16 | ColumnecpExternalInput4 | read-only | current | This is the state of External Input #4 from the viewpoint of the Extended Control Processor (ECP). |
| 1.3.6.1.4.1.326.2.2.1.7.2.1.1.1.17 | ColumnecpExternalInput5 | read-only | current | This is the state of External Input #5 from the viewpoint of the Extended Control Processor (ECP). |
| 1.3.6.1.4.1.326.2.2.1.7.2.2 | NodeecpIpGroup | |||
| 1.3.6.1.4.1.326.2.2.1.7.2.2.1 | TableecpNetIfTable | not-accessible | current | This table contains the network interface information for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.1.1 | RowecpNetIfEntry | not-accessible | current | This entry contains the network interface information for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.1 | ColumnecpNetIfIndex | read-only | current | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.2 | ColumnecpNetIfDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.3 | ColumnecpNetIfPhysAddress | read-only | current | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.4 | ColumnecpNetIfAdminStatus | read-write | current | The desired state of the interface. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.5 | ColumnecpNetIfOperStatus | read-only | current | The current operational state of the interface. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.6 | ColumnecpNetIfLastChange | read-only | current | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.7 | ColumnecpNetIfIpAddr | read-write | current | The IP address associated with this network interface. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.8 | ColumnecpNetIfIpMask | read-write | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.1.1.9 | ColumnecpNetIfIpBcastAddr | read-write | current | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2 | TableecpNetIfStatsTable | not-accessible | current | This table contains the network interface statistics for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1 | RowecpNetIfStatsEntry | not-accessible | current | This entry contains the network interface statistics for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.1 | ColumnecpNetIfInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.2 | ColumnecpNetIfInUcastPkts | read-only | current | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.3 | ColumnecpNetIfInNUcastPkts | read-only | current | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.4 | ColumnecpNetIfInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.5 | ColumnecpNetIfInErrors | read-only | current | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.6 | ColumnecpNetIfInUnknownProtos | read-only | current | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.7 | ColumnecpNetIfOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.8 | ColumnecpNetIfOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.9 | ColumnecpNetIfOutNUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.10 | ColumnecpNetIfOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.11 | ColumnecpNetIfOutErrors | read-only | current | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.2.1.12 | ColumnecpNetIfOutQLen | read-only | current | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3 | TableecpIpStatsTable | not-accessible | current | This table contains the Internet protocol statistics for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1 | RowecpIpStatsEntry | not-accessible | current | This entry contains the Internet protocol statistics for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.1 | ColumnecpIpInReceives | read-only | current | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.2 | ColumnecpIpInHdrErrors | read-only | current | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live … |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.3 | ColumnecpIpInAddrErrors | read-only | current | The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.4 | ColumnecpIpForwDatagrams | read-only | current | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.5 | ColumnecpIpInUnknownProtos | read-only | current | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.6 | ColumnecpIpInDiscards | read-only | current | The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.7 | ColumnecpIpInDelivers | read-only | current | The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.8 | ColumnecpIpOutRequests | read-only | current | The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.9 | ColumnecpIpOutDiscards | read-only | current | The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for … |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.10 | ColumnecpIpOutNoRoutes | read-only | current | The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.11 | ColumnecpIpReasmReqds | read-only | current | The number of IP fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.12 | ColumnecpIpReasmOKs | read-only | current | The number of IP datagrams successfully re- assembled. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.13 | ColumnecpIpReasmFails | read-only | current | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.14 | ColumnecpIpFragOKs | read-only | current | The number of IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.15 | ColumnecpIpFragFails | read-only | current | The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.3.1.16 | ColumnecpIpFragCreates | read-only | current | The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.4 | TableecpIpRouteTable | not-accessible | current | This table contains the Internet Protocol routing entries for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.4.1 | RowecpIpRouteEntry | not-accessible | current | This entry contains the Internet Protocol routing data for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.1 | ColumnecpIpRouteDest | read-only | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.2 | ColumnecpIpRouteIfIndex | read-write | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.3 | ColumnecpIpRouteNextHop | read-write | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.4 | ColumnecpIpRouteMetric1 | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If … |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.5 | ColumnecpIpRouteType | read-write | current | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.4.1.6 | ColumnecpIpRouteMask | read-write | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5 | TableecpIcmpStatsTable | not-accessible | current | This table contains the Internet Control Message Protocol statistics for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1 | RowecpIcmpStatsEntry | not-accessible | current | This entry contains the Internet Control Message Protocol statistics for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.1 | ColumnecpIcmpInMsgs | read-only | current | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.2 | ColumnecpIcmpInErrors | read-only | current | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.3 | ColumnecpIcmpInDestUnreach | read-only | current | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.4 | ColumnecpIcmpInTimeExcds | read-only | current | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.5 | ColumnecpIcmpInParmProbs | read-only | current | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.6 | ColumnecpIcmpInSrcQuenchs | read-only | current | The number of ICMP Source Quench messages received. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.7 | ColumnecpIcmpInRedirects | read-only | current | The number of ICMP Redirect messages received. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.8 | ColumnecpIcmpInEchos | read-only | current | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.9 | ColumnecpIcmpInEchoReps | read-only | current | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.10 | ColumnecpIcmpInTimestamps | read-only | current | The number of ICMP Timestamp (request) messages received. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.11 | ColumnecpIcmpInTimestampReps | read-only | current | The number of ICMP Timestamp Reply messages received. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.12 | ColumnecpIcmpInaddrMasks | read-only | current | The number of ICMP Address Mask Request messages received. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.13 | ColumnecpIcmpInAddrMaskReps | read-only | current | The number of ICMP Address Mask Reply messages received. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.14 | ColumnecpIcmpOutMsgs | read-only | current | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.15 | ColumnecpIcmpOutErrors | read-only | current | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.16 | ColumnecpIcmpOutDestUnreachs | read-only | current | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.17 | ColumnecpIcmpOutTimeExcds | read-only | current | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.18 | ColumnecpIcmpOutParmProbs | read-only | current | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.19 | ColumnecpIcmpOutSrcQuenchs | read-only | current | The number of ICMP Source Quench messages sent. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.20 | ColumnecpIcmpOutRedirects | read-only | current | The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.21 | ColumnecpIcmpOutEchos | read-only | current | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.22 | ColumnecpIcmpOutEchoReps | read-only | current | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.23 | ColumnecpIcmpOutTimestamps | read-only | current | The number of ICMP Timestamp (request) messages sent. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.24 | ColumnecpIcmpOutTimestampReps | read-only | current | The number of ICMP Timestamp Reply messages sent. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.25 | ColumnecpIcmpOutAddrMasks | read-only | current | The number of ICMP Address Mask Request messages sent. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.5.1.26 | ColumnecpIcmpOutAddrMaskReps | read-only | current | The number of ICMP Address Mask Reply messages sent. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.6 | TableecpTcpStatsTable | not-accessible | current | This table contains the Transmission Control Protocol statistics for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.6.1 | RowecpTcpStatsEntry | not-accessible | current | This entry contains the Transmission Control Protocol statistics for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.1 | ColumnecpTcpActiveOpens | read-only | current | The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.2 | ColumnecpTcpPassiveOpens | read-only | current | The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.3 | ColumnecpTcpAttemptFails | read-only | current | The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of … |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.4 | ColumnecpTcpEstabResets | read-only | current | The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.5 | ColumnecpTcpCurrEstab | read-only | current | The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.6 | ColumnecpTcpInSegs | read-only | current | The total number of segments received, including those received in error. This count includes segments received on currently established connections. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.7 | ColumnecpTcpOutSegs | read-only | current | The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.6.1.8 | ColumnecpTcpRetransSegs | read-only | current | The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.7 | TableecpUdpStatsTable | not-accessible | current | This table contains the User Datagram Protocol statistics for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.7.1 | RowecpUdpStatsEntry | not-accessible | current | This entry contains the User Datagram Protocol statistics for the Extended Control Processor (ECP) board. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.7.1.1 | ColumnecpUdpInDatagrams | read-only | current | The total number of UDP datagrams delivered to UDP users. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.7.1.2 | ColumnecpUdpNoPorts | read-only | current | The total number of received UDP datagrams for which there was no application at the destination port. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.7.1.3 | ColumnecpUdpInErrors | read-only | current | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.7.1.4 | ColumnecpUdpOutDatagrams | read-only | current | The total number of UDP datagrams sent from this entity. |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.8 | TableecpIpConfigTable | not-accessible | current | IP Configuration table for the TCMs |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.8.1 | RowecpIpConfigEntry | not-accessible | current | IP Configuration table entry for the TCMs |
| 1.3.6.1.4.1.326.2.2.1.7.2.2.8.1.1 | ColumnecpIpForwarding | read-write | current | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP g… |
| 1.3.6.1.4.1.326.2.2.1.7.2.3 | NodeecpSnmp | |||
| 1.3.6.1.4.1.326.2.2.1.7.2.3.1 | NodeecpTrapConfGroup | |||
| 1.3.6.1.4.1.326.2.2.1.7.2.3.1.1 | ScalarecpTrapNumberOfDest | read-only | current | The current number of configured trap destinations. All traps are sent to all destinations. |
| 1.3.6.1.4.1.326.2.2.1.7.2.3.1.2 | TableecpTrapDestTable | not-accessible | current | A table of destinations to which the agent sends traps. |
| 1.3.6.1.4.1.326.2.2.1.7.2.3.1.2.1 | RowecpTrapDestEntry | not-accessible | current | A table entry containing address of a management station, to which the agent sends traps. |
| 1.3.6.1.4.1.326.2.2.1.7.2.3.1.2.1.1 | ColumnecpTrapDest | read-only | current | Address to which the agent sends traps. Usually a network management station sets this address to itself. |
| 1.3.6.1.4.1.326.2.2.1.7.2.3.1.2.1.2 | ColumnecpTrapDestStatus | read-write | current | The status of this trap destination entry. |
| 1.3.6.1.4.1.326.2.2.1.8 | NodeesiCard | |||
| 1.3.6.1.4.1.326.2.2.1.8.1 | NodeesiHardware | |||
| 1.3.6.1.4.1.326.2.2.1.8.1.1 | TableesiCardHwTable | not-accessible | current | This table contains the hardware information for the External Synchronization Interface (ESI) cards. |
| 1.3.6.1.4.1.326.2.2.1.8.1.1.1 | RowesiCardHwEntry | not-accessible | current | This table entry contains the hardware information for a single External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.1.1.1.1 | ColumnesiCardIndex | read-only | current | This is the index for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.1.1.1.2 | ColumnesiHwCardType | read-only | current | This is the card type for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.1.1.1.3 | ColumnesiHwCardVersion | read-only | current | This is the card version for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.1.1.1.4 | ColumnesiHwPllStatus | read-only | current | This is the card phase-locked loop (PLL) status for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2 | NodeesiSoftware | |||
| 1.3.6.1.4.1.326.2.2.1.8.2.1 | TableesiCardSwTable | not-accessible | current | This table contains the software information for the External Synchronization Interface (ESI) cards. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1 | RowesiCardSwEntry | not-accessible | current | This table entry contains the software information for a single External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.1 | ColumnesiOperationStatus | read-only | current | This is the operation status of the clock output for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.2 | ColumnesiCurrentTimingRef | read-only | current | This is the current timing reference in use for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.3 | ColumnesiRequestedTimingRef | read-write | current | This is the timing reference requested to be used for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.4 | ColumnesiPrimaryRefSource | read-write | current | This is the primary timing reference source for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.5 | ColumnesiSecondaryRefSource | read-write | current | This is the secondary timing reference source for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.6 | ColumnesiCurrentFaultBits | read-only | current | This is the current state of the fault bits presented by this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.7 | ColumnesiBitsFramingFormat | read-write | current | This is the framing format of the BITS interface for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.8 | ColumnesiBitsCodingFormat | read-write | current | This is the coding format of the BITS interface for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.9 | ColumnesiBitsOutputLevel | read-write | current | This is the output level (dB) of the DS1 BITS interface for this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.10 | ColumnesiRevertiveSwitching | read-write | current | This is the status of the revertive switching for timing sources on this External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.11 | ColumnesiRevertiveDelay | read-write | current | This is the amount of time after the restoration of the primary timing reference before the External Synchronization Interface (ESI) card will be instructed to… |
| 1.3.6.1.4.1.326.2.2.1.8.2.1.1.12 | ColumnesiSwitchingDelay | read-write | current | This is the amount of time after the failure of a timing reference before the External Synchronization Interface (ESI) card will be instructed to switch to the… |
| 1.3.6.1.4.1.326.2.2.1.8.2.2 | TableesiReferenceTable | not-accessible | current | This table contains the timing reference source information for the External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.2.1 | RowesiReferenceEntry | not-accessible | current | This table entry contains the timing reference source information for a single External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.2.1.1 | ColumnesiRefSource | read-only | current | This is the timing reference source index for the External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.2.1.2 | ColumnesiRefSourceText | read-only | current | This is a textual description of the timing reference source that is provided to the External Synchronization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.2.1.3 | ColumnesiRefSourceStatus | read-only | current | This is the status of the timing reference source that is provided to the External Synchornization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.2.1.4 | ColumnesiRefSourceAdminStatus | read-write | current | This is the admin status of the timing reference source that is provided to the External Synchornization Interface (ESI) card. |
| 1.3.6.1.4.1.326.2.2.1.8.2.2.1.5 | ColumnesiRefSourceQualStatus | read-write | current | This is the RefQual status of the timing reference source that is provided to the External Synchornization Interface (ESI) card. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EsiReferenceSource | INTEGER { fab1Pri(1), fab1Sec(2), fab2Pri(3), fab2Sec(4), fab3Pri(5), fab3Sec(6), fab4Pri(7), fab4Sec(8), bits1(9), bits2(10) |