GDC-5553-MIB
85 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.6 | Nodedsx1 | |||
| 1.3.6.1.4.1.498.6.5 | Nodesc5553 | |||
| 1.3.6.1.4.1.498.6.5.1 | Nodesc5553Version | |||
| 1.3.6.1.4.1.498.6.5.1.1 | Scalarsc5553MIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |
| 1.3.6.1.4.1.498.6.5.1.2 | Tablesc5553VersionTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.498.6.5.1.2.1 | Rowsc5553VersionEntry | not-accessible | mandatory | An entry in the GDC Dsx1 Version Table. |
| 1.3.6.1.4.1.498.6.5.1.2.1.1 | Columnsc5553VersionIndex | read-only | mandatory | Identifies Version parameters associated with the managed object. |
| 1.3.6.1.4.1.498.6.5.1.2.1.2 | Columnsc5553FirmwareRev | read-only | obsolete | |
| 1.3.6.1.4.1.498.6.5.1.2.1.3 | Columnsc5553ActiveFirmwareRev | read-only | mandatory | The version number of the firmware currently executing. The format is MM.NN.BB where: MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix Revision … |
| 1.3.6.1.4.1.498.6.5.1.2.1.4 | Columnsc5553StoredFirmwareRev | read-only | mandatory | The version number of the firmware stored (in a compressed format) but not currently executing. MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix… |
| 1.3.6.1.4.1.498.6.5.1.2.1.5 | Columnsc5553StoredFirmwareStatus | read-only | mandatory | This object represents the state of the Non-Active or Stored firmware: statBlank(1) Factory Default statDownLoading(2) In process of downloading firmware statO… |
| 1.3.6.1.4.1.498.6.5.1.2.1.6 | Columnsc5553SwitchActiveFirmware | read-write | mandatory | This object is used to switch the active executing firmware from the version in sc5553ActiveFirmwareRev to the version in sc5553StoredFirmwareRev. When a switc… |
| 1.3.6.1.4.1.498.6.5.1.2.1.7 | Columnsc5553DownloadingMode | read-write | mandatory | This object is used to configure the download mode: disableAll(1) Prevents any firmware downloading to GDCHDSL enableAndWait(2) Allows downloading zipped code … |
| 1.3.6.1.4.1.498.6.5.2 | Nodesc5553Allocation | |||
| 1.3.6.1.4.1.498.6.5.2.1 | Tablesc5553Ds0AllocationTable | not-accessible | mandatory | The GDC 5553 DS0 allocation table |
| 1.3.6.1.4.1.498.6.5.2.1.1 | Rowsc5553Ds0AllocationEntry | not-accessible | mandatory | The GDC SC5553 Configuration table entry. |
| 1.3.6.1.4.1.498.6.5.2.1.1.1 | Columnsc5553Ds0AllocationIndex | read-only | mandatory | The index value: slot, line, drop, and interface |
| 1.3.6.1.4.1.498.6.5.2.1.1.2 | Columnsc5553DS0BaseRate | read-write | mandatory | Indicates the DS0 base rate: either 56K or 64K bits per second. This is used in conjunction with the number of DS0s set to 'enabled' to determine the total ban… |
| 1.3.6.1.4.1.498.6.5.2.1.1.3 | Columnsc5553Highway | read-only | mandatory | The highway used for ds0 traffic by this device |
| 1.3.6.1.4.1.498.6.5.2.1.1.4 | Columnsc5553DccDs0 | read-write | mandatory | The values 1-32 indicates Ds0 1 - DS0 32, is used for diagnostics communications. The value noDccDs0(33) indicates that diagnostics communications does not uti… |
| 1.3.6.1.4.1.498.6.5.2.1.1.5 | Columnsc5553DS0Allocation | read-only | mandatory | A bitwise snapshot of the DS0 allocation as follows: first octet second octet third octet fourth octet fifth octet bit0 - ds0 7 bit0 - ds0 14 bit0 - ds0 21 bit… |
| 1.3.6.1.4.1.498.6.5.3 | Nodesc5553Configuration | |||
| 1.3.6.1.4.1.498.6.5.3.1 | Tablesc5553ConfigTable | not-accessible | mandatory | The GDC 5553 Configuration table. |
| 1.3.6.1.4.1.498.6.5.3.1.1 | Rowsc5553ConfigEntry | not-accessible | mandatory | The sc5553 Configuration table entry. |
| 1.3.6.1.4.1.498.6.5.3.1.1.1 | Columnsc5553ConfigIndex | read-only | mandatory | The index value: slot, line, drop, and interface |
| 1.3.6.1.4.1.498.6.5.3.1.1.2 | Columnsc5553ExternalTiming | read-write | mandatory | Disabled indicates timing is provided by the 5553. Enabled indicates timing is provided by the customer business equipment |
| 1.3.6.1.4.1.498.6.5.3.1.1.3 | Columnsc5553ChannelType | read-only | mandatory | The channel interface type |
| 1.3.6.1.4.1.498.6.5.3.1.1.4 | Columnsc5553ClockInvert | read-write | mandatory | Clock invert option |
| 1.3.6.1.4.1.498.6.5.3.1.1.5 | Columnsc5553DataInvert | read-write | mandatory | Data invert option |
| 1.3.6.1.4.1.498.6.5.3.1.1.6 | Columnsc5553ConstantDCD | read-write | mandatory | Controls the operation of Data Carrier Detect (DCD) signal. |
| 1.3.6.1.4.1.498.6.5.3.1.1.7 | Columnsc5553ConstantDSR | read-write | mandatory | Controls the operation of the Data Set Ready (DSR) signal. |
| 1.3.6.1.4.1.498.6.5.3.1.1.8 | Columnsc5553RTSCTScontrol | read-write | mandatory | Controls the function of the channel's Request To Send and and Clear To Send signals used for flow control. ctsOn indicates that CTS is forced on at all times,… |
| 1.3.6.1.4.1.498.6.5.3.1.1.9 | Columnsc5553ExtLLCtrl | read-write | mandatory | Enables/disables the ability to initiate a local loop test via the assertion of the EIA LL test lead at the DTE interface. |
| 1.3.6.1.4.1.498.6.5.3.1.1.10 | Columnsc5553ExtRLCtrl | read-write | mandatory | Enables/disables the ability to initiate a remote loop test via the assertion of the EIA RL test lead at the DTE interface. |
| 1.3.6.1.4.1.498.6.5.3.1.1.11 | Columnsc5553InbandDccMode | read-write | mandatory | The mode of propagation of inband Diagnostics Communication Channel to the dedicated remote NMS553 unit. None specifies no inband DCC. Embedded is an allowed v… |
| 1.3.6.1.4.1.498.6.5.3.1.1.12 | Columnsc5553InbandLoop | read-write | mandatory | This object is also referred to as RDL response. When enabled (pn127), the channel will enter a remote data loopback when an inband RDL code is detected. The r… |
| 1.3.6.1.4.1.498.6.5.3.1.1.13 | Columnsc5553InbandLoopdown | read-write | mandatory | This object is also referred to as RDL Auto Timeout. When enabled (tenMinutes), the loopback will be automatically terminated by the unit after ten minutes. Wh… |
| 1.3.6.1.4.1.498.6.5.3.1.1.14 | Columnsc5553WakeUpRemote | read-only | mandatory | This object is requested to initiate the add remote process. The serial number of the associated remote is returned. |
| 1.3.6.1.4.1.498.6.5.4 | Nodesc5553DTEsignalStat | |||
| 1.3.6.1.4.1.498.6.5.4.1 | Tablesc5553SignalStatusTable | not-accessible | mandatory | The sc5553 DTE Signal Status table. Information in the entries of this table define the status of DSU channel interface leads. There are entries in this table … |
| 1.3.6.1.4.1.498.6.5.4.1.1 | Rowsc5553SignalStatusEntry | not-accessible | mandatory | The sc5553 DTE Signal Status table entry. |
| 1.3.6.1.4.1.498.6.5.4.1.1.1 | Columnsc5553SignalStatusIndex | read-only | mandatory | The index value: slot, line, drop, and interface |
| 1.3.6.1.4.1.498.6.5.4.1.1.2 | Columnsc5553CTSstatus | read-only | mandatory | The state of the sc5553's Clear To Send (CTS) signal. The value transitions(3) indicates that the signal is alternating between the states off(1) and on(2). |
| 1.3.6.1.4.1.498.6.5.4.1.1.3 | Columnsc5553RTSstatus | read-only | mandatory | The state of the sc5553's Request To Send (RTS) signal. The value transitions(3) indicates that the signal is alternating between the states off(1) and on(2). |
| 1.3.6.1.4.1.498.6.5.4.1.1.4 | Columnsc5553DTRstatus | read-only | mandatory | The state of the sc5553's Data Terminal Ready (DTR) signal. |
| 1.3.6.1.4.1.498.6.5.4.1.1.5 | Columnsc5553DSRstatus | read-only | mandatory | The state of the sc5553's Data Set Ready (DSR) signal. |
| 1.3.6.1.4.1.498.6.5.4.1.1.6 | Columnsc5553DCDstatus | read-only | mandatory | The state of the sc5553's Data Carrier Detect (DCD) signal. The value transitions(3) indicates that the signal is alternating between the states off(1) and on(… |
| 1.3.6.1.4.1.498.6.5.4.1.1.7 | Columnsc5553RXCstatus | read-only | mandatory | The state of the sc5553's receive clock (RXC) signal. The value transitions(2) indicates that the signal is alternating between states off(1) and on(2). |
| 1.3.6.1.4.1.498.6.5.4.1.1.8 | Columnsc5553TXCstatus | read-only | mandatory | The state of the sc5553's Transmit Clock (TXC) signal. The value transitions(2) indicates that the signal is alternating between states off(1) and on(2). |
| 1.3.6.1.4.1.498.6.5.4.1.1.9 | Columnsc5553RXDstatus | read-only | mandatory | The state of the sc5553's Receive Data (RXD) signal. |
| 1.3.6.1.4.1.498.6.5.4.1.1.10 | Columnsc5553TXDstatus | read-only | mandatory | The state of the sc5553's Transmit Data (TXD) signal. |
| 1.3.6.1.4.1.498.6.5.4.1.1.11 | Columnsc5553ALTestLeadStatus | read-only | mandatory | Sets state of the AL Test lead. |
| 1.3.6.1.4.1.498.6.5.4.1.1.12 | Columnsc5553RLTestLeadStatus | read-only | mandatory | Sets state of the RL Test lead. |
| 1.3.6.1.4.1.498.6.5.5 | Nodesc5553Diagnostics | |||
| 1.3.6.1.4.1.498.6.5.5.1 | Tablesc5553DiagTable | not-accessible | mandatory | The SC5553 Diagnostics Table. |
| 1.3.6.1.4.1.498.6.5.5.1.1 | Rowsc5553DiagEntry | not-accessible | mandatory | The SC5553 Diagnostics entry. |
| 1.3.6.1.4.1.498.6.5.5.1.1.1 | Columnsc5553DiagIndex | read-only | mandatory | The index value: slot, line, drop, and interface |
| 1.3.6.1.4.1.498.6.5.5.1.1.2 | Columnsc5553DiagPattern | read-write | mandatory | Selects the test pattern for Remote and Local loopback tests. |
| 1.3.6.1.4.1.498.6.5.5.1.1.3 | Columnsc5553DiagTestResults | read-only | mandatory | The results of the last diagnostic test. This can be the current test running or the last completed test. The units of the value of this object depend on the t… |
| 1.3.6.1.4.1.498.6.5.5.1.1.4 | Columnsc5553DiagTestDuration | read-write | mandatory | This specifies the test duration for the Remote and Local loopback tests. |
| 1.3.6.1.4.1.498.6.5.5.1.1.5 | Columnsc5553DiagTestSelection | read-write | mandatory | To halt the execution of any and all diagnostic tests that may be running, SET this object to stopTestorNoTest(1). LocalLoopBack: To initiate a LocalLoopBack w… |
| 1.3.6.1.4.1.498.6.5.6 | Nodesc5553Maintenance | |||
| 1.3.6.1.4.1.498.6.5.6.1 | Tablesc5553MaintTable | not-accessible | mandatory | The table describes the maintenance functions for the sc5553. |
| 1.3.6.1.4.1.498.6.5.6.1.1 | Rowsc5553MaintEntry | not-accessible | mandatory | An entry in the GDC maintenance Table |
| 1.3.6.1.4.1.498.6.5.6.1.1.1 | Columnsc5553MaintIndex | read-only | mandatory | The index value: slot, line, drop, and interface |
| 1.3.6.1.4.1.498.6.5.6.1.1.2 | Columnsc5553LedStatus | read-only | mandatory | Returns a bitwise snapshot of the front panel LED state and front panel switches. Octet 1 bit 7 - not used bit 6 - ON bit 5 - INSV bit 4 - RSP bit 3 - TMG bit … |
| 1.3.6.1.4.1.498.6.5.6.1.1.3 | Columnsc5553SoftReset | read-write | mandatory | Supports the action of soft resetting the unit. When this object is set to reset(1), then the unit performs a soft reset. The value norm will be returned when … |
| 1.3.6.1.4.1.498.6.5.6.1.1.4 | Columnsc5553FrontPanel | read-write | mandatory | This variable is used to indicate whether the front panel switches are operational or not. |
| 1.3.6.1.4.1.498.6.5.6.1.1.5 | Columnsc5553DefaultInit | read-write | mandatory | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault, the unit will reset to the … |
| 1.3.6.1.4.1.498.6.5.7 | Nodesc5553Alarms | |||
| 1.3.6.1.4.1.498.6.5.7.1 | Nodesc5553AlarmData | |||
| 1.3.6.1.4.1.498.6.5.7.1.1 | Nodesc5553NoResponseAlm | |||
| 1.3.6.1.4.1.498.6.5.7.1.2 | Nodesc5553DiagRxErrAlm | |||
| 1.3.6.1.4.1.498.6.5.7.1.3 | Nodesc5553PowerUpAlm | |||
| 1.3.6.1.4.1.498.6.5.7.1.4 | Nodesc5553DTRLossAlarm | |||
| 1.3.6.1.4.1.498.6.5.7.1.5 | Nodesc5553DSRLossAlarm | |||
| 1.3.6.1.4.1.498.6.5.7.1.6 | Nodesc5553DCDLossAlarm | |||
| 1.3.6.1.4.1.498.6.5.7.1.7 | Nodesc5553TxCLossAlarm | |||
| 1.3.6.1.4.1.498.6.5.7.1.8 | Nodesc5553TimingLoss | |||
| 1.3.6.1.4.1.498.6.5.7.1.9 | Nodesc5553EEPROMCheckAlarm | |||
| 1.3.6.1.4.1.498.6.5.7.1.10 | Nodesc5553EIATestAlarm | |||
| 1.3.6.1.4.1.498.6.5.7.1.11 | Nodesc5553FrontPanelTestAlarm | |||
| 1.3.6.1.4.1.498.6.5.7.1.12 | Nodesc5553TxDNoTransAlarm | |||
| 1.3.6.1.4.1.498.6.5.7.1.13 | Nodesc5553RxDNoTransAlarm |