GDC-DSU-MGMT-MIB
56 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.8 | Nodedsu | |||
| 1.3.6.1.4.1.498.8.5 | Nodet1 | |||
| 1.3.6.1.4.1.498.8.5.1 | TablegdcDsuDS0AllocationSchemeTable | not-accessible | mandatory | The GDC DSU DS0 Allocation Scheme table. Information in an entry of this table defines the DS0 allocation scheme (alternate or consecutive) of the represented … |
| 1.3.6.1.4.1.498.8.5.1.1 | RowgdcDsuDS0AllocationSchemeEntry | not-accessible | mandatory | The GDC DSU DS0 Allocation scheme table entry. |
| 1.3.6.1.4.1.498.8.5.1.1.1 | ColumngdcDsuDS0AllocationIndex | read-only | mandatory | The index value which uniquely identifies the DSU to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and … |
| 1.3.6.1.4.1.498.8.5.1.1.2 | ColumngdcDsuDS0AllocationScheme | read-write | mandatory | Identifies the DSU DS0 allocation scheme. The value of other(1) indicates that an allocation scheme is used which is defined elsewhere. The value consecutive(2… |
| 1.3.6.1.4.1.498.8.5.2 | TablegdcDsuChannelConfigTable | not-accessible | mandatory | The GDC DSU Channel Configuration table. Information in the entries of this table define the configuration of DSU channels. There are entries in this table for… |
| 1.3.6.1.4.1.498.8.5.2.1 | RowgdcDsuChannelConfigEntry | not-accessible | mandatory | The GDC DSU Channel Configuration table entry. |
| 1.3.6.1.4.1.498.8.5.2.1.1 | ColumngdcDsuChannelConfigIndex | read-only | mandatory | The index value which uniquely identifies the channel to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, … |
| 1.3.6.1.4.1.498.8.5.2.1.2 | ColumngdcDsuChannelBaseRate | read-write | mandatory | Indicates the DS0 base rate: either 56K or 64K bits per second. This is used in conjunction with the number of DS0s to determine the bandwidth of the channel. … |
| 1.3.6.1.4.1.498.8.5.2.1.3 | ColumngdcDsuChannelStartingDS0 | read-write | mandatory | Indicates the starting DS0 number for the bundle of DS0s used for the channel. DS0 bundles are allocated starting at the DS0 defined by this integer. When this… |
| 1.3.6.1.4.1.498.8.5.2.1.4 | ColumngdcDsuChannelNumberOfDS0s | read-write | mandatory | Indicates the number of DS0s for the bundle allocated to the channel. The number of DS0s, in conjunction with the DS0 base rate, also determines the bandwidth … |
| 1.3.6.1.4.1.498.8.5.2.1.5 | ColumngdcDsuChannelSplitTiming | read-write | mandatory | Indicates whether or not to use split timing. The value disabled(1) indicates that channel's transmit timing is provided by the DSU. The value enabled(2) indic… |
| 1.3.6.1.4.1.498.8.5.2.1.6 | ColumngdcDsuChannelChannelType | read-only | mandatory | The channel interface type. The value other(1) indicates the channel interface is a type defined elsewhere. The value none(2) indicates that there is no channe… |
| 1.3.6.1.4.1.498.8.5.2.1.7 | ColumngdcDsuChannelTransmitClockInvert | read-write | mandatory | Transmit clock invert. The value disabled(1) indicates that the channel's transmit clock is normal, or not inverted, while the value enabled(2) indicates that … |
| 1.3.6.1.4.1.498.8.5.2.1.8 | ColumngdcDsuChannelReceiveClockInvert | read-write | mandatory | Receive clock invert. The value disabled(1) indicates that the channel's receive clock is normal, or not inverted, while the value enabled(2) indicates that th… |
| 1.3.6.1.4.1.498.8.5.2.1.9 | ColumngdcDsuChannelTransmitDataInvert | read-write | mandatory | Invert the transmit data. The value disabled(1) indicates that the channel's transmit data is normal, or not inverted, while the value enabled(2) indicates tha… |
| 1.3.6.1.4.1.498.8.5.2.1.10 | ColumngdcDsuChannelReceiveDataInvert | read-write | mandatory | Invert the receive data. The value disabled(1) indicates that the channel's receive data is normal, or not inverted, while the value enabled(2) indicates that … |
| 1.3.6.1.4.1.498.8.5.2.1.11 | ColumngdcDsuChannelLocalDCD | read-write | mandatory | Controls the operation of Data Carrier Detect (DCD) signal. The value followsSignal(1) indicates that the channel's DCD follows the inband control mode idle (C… |
| 1.3.6.1.4.1.498.8.5.2.1.12 | ColumngdcDsuChannelLocalDSR | read-write | mandatory | Controls the operation of the Data Set Ready (DSR) signal. The value followsSignal(1) indicates that the channel's DSR follows the inband control mode idle (CM… |
| 1.3.6.1.4.1.498.8.5.2.1.13 | ColumngdcDsuChannelReceiveControl | read-write | mandatory | Identifies which signal is used for receive flow control. The two values are Data Carrier Detect, dcd(1), and Data Set Ready, dsr(2). |
| 1.3.6.1.4.1.498.8.5.2.1.14 | ColumngdcDsuChannelTransmitControl | read-write | mandatory | Identifies which signal is used for transmit flow control. The two values are Request To Send, rts(1), and Data Terminal Ready, dtr(2). |
| 1.3.6.1.4.1.498.8.5.2.1.15 | ColumngdcDsuChannelRTSCTScontrol | read-write | mandatory | Controls the function of the channel's Request To Send (RTS) and Clear To Send signals used for flow control. The value of ctsOn(2) indicates that CTS is force… |
| 1.3.6.1.4.1.498.8.5.2.1.16 | ColumngdcDsuChannelEIAtestLeads | read-write | mandatory | Controls the channel's EIA test leads. The EIA test leads allow customer business equipment to initiate diagnostic tests through the assertion of the EIA test … |
| 1.3.6.1.4.1.498.8.5.2.1.17 | ColumngdcDsuChannelDccMode | read-write | mandatory | The type of inband Diagnostics Communication Channel (DCC) in use. The value none(1) indicates no DCC is being used for the given channel. The value normal(2) … |
| 1.3.6.1.4.1.498.8.5.2.1.18 | ColumngdcDsuChannelInbandLoop | read-write | mandatory | In-band loopcode enable/disable. The value disabled(1) indicates the channel does not enter an RDL loop when an inband RDL code is detected. The value enable(2… |
| 1.3.6.1.4.1.498.8.5.2.1.19 | ColumngdcDsuChannelInbandLoopCode | read-write | mandatory | In-band RDL code to send and/or receive by the channel. The value pn127(2) indicates that the in-band code sent/received is in accordance with CCITT V.54 PN-12… |
| 1.3.6.1.4.1.498.8.5.2.1.20 | ColumngdcDsuChannelInbandLoopdown | read-write | mandatory | The time limit in seconds before terminating a channel's RDL. The value 0 indicates that the loopdown time is disabled and the loopback will only terminate by … |
| 1.3.6.1.4.1.498.8.5.2.1.21 | ColumngdcDsuChannelTransmitClockSource | read-write | mandatory | This object operates in conjunction with gdcDsx1TransmitClockSource in gdcdsx1.mib. If gdcDsx1TransmitClockSource is channel(4), then this object defines wheth… |
| 1.3.6.1.4.1.498.8.5.2.1.22 | ColumngdcDsuChannelFallbackClockSource | read-write | mandatory | This object operates in conjunction with gdcDsx1FallbackClockSource in gdcdsx1.mib. If gdcDsx1FallbackClockSource is channel(4), then this object defines wheth… |
| 1.3.6.1.4.1.498.8.5.2.1.23 | ColumngdcDsuChannelControlModeIdle | read-write | mandatory | Control Mode Idle (CMI) enable/disable. When the channel application is Nx56k and RTS/CTS delay is standard, then this object defines the the use of CMI to pro… |
| 1.3.6.1.4.1.498.8.5.3 | TablegdcDsuChannelSignalStatusTable | not-accessible | mandatory | The GDC DSU Channel Signal Status table. Information in the entries of this table define the status of DSU channel interface leads. There are entries in this t… |
| 1.3.6.1.4.1.498.8.5.3.1 | RowgdcDsuChannelSignalStatusEntry | not-accessible | mandatory | The GDC DSU Channel Signal Status table entry. |
| 1.3.6.1.4.1.498.8.5.3.1.1 | ColumngdcDsuChannelSignalStatusIndex | read-only | mandatory | The index value which uniquely identifies the channel to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, … |
| 1.3.6.1.4.1.498.8.5.3.1.2 | ColumngdcDsuChannelCTSstatus | read-only | mandatory | The state of the channel's Clear To Send (CTS) signal. The value transitions(3) indicates that the signal is alternating between the states off(1) and on(2). |
| 1.3.6.1.4.1.498.8.5.3.1.3 | ColumngdcDsuChannelRTSstatus | read-only | mandatory | The state of the channel's Request To Send (RTS) signal. The value transitions(3) indicates that the signal is alternating between the states off(1) and on(2). |
| 1.3.6.1.4.1.498.8.5.3.1.4 | ColumngdcDsuChannelDTRstatus | read-only | mandatory | The state of the channel's Data Terminal Ready (DTR) signal. |
| 1.3.6.1.4.1.498.8.5.3.1.5 | ColumngdcDsuChannelDSRstatus | read-only | mandatory | The state of the channel's Data Set Ready (DSR) signal. |
| 1.3.6.1.4.1.498.8.5.3.1.6 | ColumngdcDsuChannelDCDstatus | read-only | mandatory | The state of the channel's Data Carrier Detect (DCD) signal. The value transitions(3) indicates that the signal is alternating between the states off(1) and on… |
| 1.3.6.1.4.1.498.8.5.3.1.7 | ColumngdcDsuChannelRXCstatus | read-only | mandatory | The state of the channel's receive clock (RXC) signal. The value transitions(2) indicates that the signal is alternating between states off(1) and on(2). |
| 1.3.6.1.4.1.498.8.5.3.1.8 | ColumngdcDsuChannelTXCstatus | read-only | mandatory | The state of the channel's Transmit Clock (TXC) signal. The value transitions(2) indicates that the signal is alternating between states off(1) and on(2). |
| 1.3.6.1.4.1.498.8.5.3.1.9 | ColumngdcDsuChannelRXDstatus | read-only | mandatory | The state of the channel's Receive Data (RXD) signal. The value transitions(2) indicates that the signal is alternating between states off(1) and on(2). |
| 1.3.6.1.4.1.498.8.5.3.1.10 | ColumngdcDsuChannelTXDstatus | read-only | mandatory | The state of the channel's Transmit Data (TXD) signal. The value transitions(2) indicates that the signal is is alternating between states off(1) and on(2). |
| 1.3.6.1.4.1.498.8.5.4 | TablegdcDsuChannelDiagTable | not-accessible | mandatory | The GDC DSU Channel Diagnostics table. The information in this table support diagnostic testing, both active testing via patterns, and passive testing via loop… |
| 1.3.6.1.4.1.498.8.5.4.1 | RowgdcDsuChannelDiagEntry | not-accessible | mandatory | The GDC DSU Channel Diagnostics entry. |
| 1.3.6.1.4.1.498.8.5.4.1.1 | ColumngdcDsuChannelDiagIndex | read-only | mandatory | The index value which uniquely identifies the channel to which this entry is applicable. This has the form of a SC instance which defines the slot, line, drop,… |
| 1.3.6.1.4.1.498.8.5.4.1.2 | ColumngdcDsuChannelDiagSendCode | read-write | mandatory | Initiates and terminates self test pattern generation and detection (active diagnostic tests) on the DSU channel. When this object is set to other than sendNoC… |
| 1.3.6.1.4.1.498.8.5.4.1.3 | ColumngdcDsuChannelDiagProgPattern | read-write | mandatory | The 16 bit user programmable test pattern. This object works with gdcDsuChannelSendCode. When gdcDsuChannelSendCodeis set to sendProgPattern(6), this object is… |
| 1.3.6.1.4.1.498.8.5.4.1.4 | ColumngdcDsuChannelLoopbackConfig | read-write | mandatory | The loopback configuration for the DSU channel to be used for both active and passive diagnostic tests. |
| 1.3.6.1.4.1.498.8.5.4.1.5 | ColumngdcDsuChannelTestDuration | read-write | mandatory | The length of the diagnostic test, in time. The value 0 signifies that the test should run indefinitely until explicitly terminated. |
| 1.3.6.1.4.1.498.8.5.4.1.6 | ColumngdcDsuChannelDiagTimingSource | read-write | mandatory | The timing source to be used for diagnostic tests. For tests that do not disrupt the transmit timing source as defined in gdcDsx1TransmitClockSource the value … |
| 1.3.6.1.4.1.498.8.5.4.1.7 | ColumngdcDsuChannelTestStatus | read-write | mandatory | The current execution status of the diagnostic test. The value testRunning(1) indicates that a diagnostic test is running. The value testComplete(2) indicates … |
| 1.3.6.1.4.1.498.8.5.4.1.8 | ColumngdcDsuChannelTestExceptions | read-only | mandatory | Indicates any exceptions that may have occurred that would affect the interpretation of the test results provided in gdcDsuChannelTestResults. The value of thi… |
| 1.3.6.1.4.1.498.8.5.4.1.9 | ColumngdcDsuChannelTestResults | read-only | mandatory | The results of the last diagnostic test, in bit errors. This can be the current test running or the last completed test. Note that the interpretation of these … |
| 1.3.6.1.4.1.498.8.5.5 | ScalargdcDsuSystemMIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |