GDC-SC553-MIB
195 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.6 | Nodedsx1 | |||
| 1.3.6.1.4.1.498.6.11 | Nodesc553 | |||
| 1.3.6.1.4.1.498.6.11.1 | Nodesc553Version | |||
| 1.3.6.1.4.1.498.6.11.1.1 | Scalarsc553MIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |
| 1.3.6.1.4.1.498.6.11.1.2 | Tablesc553VersionTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.498.6.11.1.2.1 | Rowsc553VersionEntry | not-accessible | mandatory | An entry in the GDC SC553 Version Table. |
| 1.3.6.1.4.1.498.6.11.1.2.1.1 | Columnsc553VersionIndex | read-only | mandatory | Identifies Version parameters associated with the managed object. |
| 1.3.6.1.4.1.498.6.11.1.2.1.2 | Columnsc553ActiveFirmwareRev | read-only | mandatory | The version number of the firmware currently executing. The format is MM.NN.BB where: MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix Revision … |
| 1.3.6.1.4.1.498.6.11.1.2.1.3 | Columnsc553StoredFirmwareRev | read-only | mandatory | The version number of the firmware stored (in a compressed format) but not currently executing. MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix… |
| 1.3.6.1.4.1.498.6.11.1.2.1.4 | Columnsc553BootRev | read-only | mandatory | The version number of the bootstrap firmware. The version number of the firmware, to allow products to know which revision is installed. The released version n… |
| 1.3.6.1.4.1.498.6.11.1.2.1.5 | Columnsc553StoredFirmwareStatus | read-only | mandatory | This object represents the state of the Non-Active or Stored firmware: statBlank(1) Factory Default statDownLoading(2) In process of downloading firmware statO… |
| 1.3.6.1.4.1.498.6.11.1.2.1.6 | Columnsc553SwitchActiveFirmware | read-write | mandatory | This object is used to switch the active executing firmware from the version in sc553ActiveRev to the version in sc553StoredRev. When a switchActive(2) is set … |
| 1.3.6.1.4.1.498.6.11.1.2.1.7 | Columnsc553DownloadingMode | read-write | mandatory | This object is used to configure the download mode: disableAll(1) Prevents any firmware downloading to SC553 enableAndWait(2) Allows downloading zipped code to… |
| 1.3.6.1.4.1.498.6.11.2 | Nodesc553Configuration | |||
| 1.3.6.1.4.1.498.6.11.2.1 | Tablesc553ChannelConfigTable | not-accessible | mandatory | The GDC 553 Channel Configuration table. |
| 1.3.6.1.4.1.498.6.11.2.1.1 | Rowsc553ChannelConfigEntry | not-accessible | mandatory | The sc553 Channel Configuration table entry. |
| 1.3.6.1.4.1.498.6.11.2.1.1.1 | Columnsc553ChannelConfigIndex | read-only | mandatory | The index value which uniquely identifies the channel to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, … |
| 1.3.6.1.4.1.498.6.11.2.1.1.2 | Columnsc553ChannelDS0AllocationScheme | read-write | mandatory | Identifies the DSU DS0 allocation scheme.The value consecutive(2) indicates that bundles of DS0s are allocated to channels consecutively from the starting DS0.… |
| 1.3.6.1.4.1.498.6.11.2.1.1.3 | Columnsc553ChannelBaseRate | read-write | mandatory | Indicates the DS0 base rate: either 56K or 64K bits per second. This is used in conjunction with the number of DS0s to determine the bandwidth of the channel. … |
| 1.3.6.1.4.1.498.6.11.2.1.1.4 | Columnsc553ChannelStartingDS0 | read-write | mandatory | Indicates the starting DS0 number for the bundle of DS0s used for the channel. DS0 bundles are allocated starting at the DS0 defined by this integer. When this… |
| 1.3.6.1.4.1.498.6.11.2.1.1.5 | Columnsc553ChannelNumberOfDS0s | read-write | mandatory | Indicates the number of DS0s for the bundle allocated to the channel. The number of DS0s, in conjunction with the DS0 base rate, also determines the bandwidth … |
| 1.3.6.1.4.1.498.6.11.2.1.1.6 | Columnsc553ChannelInbandDccMode | read-write | mandatory | The mode of propagation of inband Diagnostics Communication Channel to the dedicated remote sc553 unit. None specifies no inband DCC. Embedded is an allowed va… |
| 1.3.6.1.4.1.498.6.11.2.1.1.7 | Columnsc553ChannelSplitTiming | read-write | mandatory | Indicates whether or not to use split timing. The value disabled(1) indicates that channel's transmit timing is provided by the DSU. The value enabled(2) indic… |
| 1.3.6.1.4.1.498.6.11.2.1.1.8 | Columnsc553ChannelChannelType | read-only | mandatory | The channel interface type. The value none(1) indicates that there is no channel interface for the index. The value v35(2) indicates the channel interface is s… |
| 1.3.6.1.4.1.498.6.11.2.1.1.9 | Columnsc553ChannelAdminClkInvert | read-write | mandatory | Clock invert option for manual settings ( 1-4). Options autoTxnormRx(5) and autoTxinvertRx(6) allow auto selection of Tx clock with Rx clock normal, or inverte… |
| 1.3.6.1.4.1.498.6.11.2.1.1.10 | Columnsc553ChannelOperClkInvert | read-only | mandatory | Clock invert option. Read Only. |
| 1.3.6.1.4.1.498.6.11.2.1.1.11 | Columnsc553ChannelDataInvert | read-write | mandatory | Data invert option |
| 1.3.6.1.4.1.498.6.11.2.1.1.12 | Columnsc553ChannelLocalDCD | read-write | mandatory | Controls the operation of Data Carrier Detect (DCD) signal. The value followsSignal(1) indicates that the channel's DCD follows the inband control mode idle (C… |
| 1.3.6.1.4.1.498.6.11.2.1.1.13 | Columnsc553ChannelLocalDSR | read-write | mandatory | Controls the operation of the Data Set Ready (DSR) signal. The value followsSignal(1) indicates that the channel's DSR follows the inband control mode idle (CM… |
| 1.3.6.1.4.1.498.6.11.2.1.1.14 | Columnsc553ChannelRTSCTSControl | read-write | mandatory | ? |
| 1.3.6.1.4.1.498.6.11.2.1.1.15 | Columnsc553ChannelEIAtestLeads | read-write | mandatory | Controls the channel's EIA test leads. The EIA test leads allow customer business equipment to initiate diagnostic tests through the assertion of the EIA test … |
| 1.3.6.1.4.1.498.6.11.2.1.1.16 | Columnsc553ChannelInbandLoop | read-write | mandatory | In-band loopcode enable/disable. The value disabled(1) indicates the channel does not enter an RDL loop when an inband RDL code is detected. The value enable(2… |
| 1.3.6.1.4.1.498.6.11.2.1.1.17 | Columnsc553ChannelInbandLoopdown | read-write | mandatory | The time limit in seconds before terminating a channel's RDL. The value inhibit(1) indicates that the loopdown time is disabled and the loopback will only term… |
| 1.3.6.1.4.1.498.6.11.2.1.1.18 | Columnsc553channelRedundancy | read-write | mandatory | |
| 1.3.6.1.4.1.498.6.11.2.1.1.19 | Columnsc553ChannelActivePort | read-write | mandatory | This option routes the Channel bundle through either the network or cascade port. When a port becomes active the other port is automatically defined as the sta… |
| 1.3.6.1.4.1.498.6.11.2.1.1.20 | Columnsc553ChannelNetworkNumber | read-write | obsolete | In redundant T1 applications, there are two (2) networks employed. The are arbitrarily labeled Network 1 and Network 2. This option designates which of these r… |
| 1.3.6.1.4.1.498.6.11.2.1.1.21 | Columnsc553ChannelNetworkPosition | read-write | obsolete | In redundant T1 applications, this option defines the network position of the DSU. Network position indicates that the DSU is connected directly to the network… |
| 1.3.6.1.4.1.498.6.11.2.1.1.22 | Columnsc553WakeUpRemote | read-only | mandatory | This object is requested to initiate the add remote process. The serial number of the associated remote is returned. |
| 1.3.6.1.4.1.498.6.11.2.1.1.23 | Columnsc553ChannelInService | read-write | mandatory | |
| 1.3.6.1.4.1.498.6.11.2.2 | Tablesc553NetworkConfigTable | not-accessible | mandatory | The GDC 553 Network Configuration table. |
| 1.3.6.1.4.1.498.6.11.2.2.1 | Rowsc553NetworkConfigEntry | not-accessible | mandatory | The sc553 Network Configuration table entry. |
| 1.3.6.1.4.1.498.6.11.2.2.1.1 | Columnsc553NetworkConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.2.2.1.2 | Columnsc553NetworkAdminLineType | read-write | mandatory | The values describe: 'auto' indicates the unit will determine framing. 'manEsf' indicates manual selection of extended superframe format. 'manD4'indicates manu… |
| 1.3.6.1.4.1.498.6.11.2.2.1.3 | Columnsc553NetworkOperLineType | read-only | mandatory | The values describe: 'manEsf' indicates the current setting of Line type. 'manD4'indicates the current setting of Line type. 'unframed' indicates the current s… |
| 1.3.6.1.4.1.498.6.11.2.2.1.4 | Columnsc553NetworkInterfaceType | read-write | mandatory | The operating mode of the interface. Setting the value of this object to ds1(1) configures the interface as standard DS1. Setting the value of this object to d… |
| 1.3.6.1.4.1.498.6.11.2.2.1.5 | Columnsc553NetworkPreequalization | read-write | mandatory | Is the preequalization of the transmitter of the interface. This object interoperates with the object sc553NetworkInterfaceType. When the value of sc553Network… |
| 1.3.6.1.4.1.498.6.11.2.2.1.6 | Columnsc553NetworkAdminLineBuildout | read-write | mandatory | This variable is used to set the Transmit Ntwk Build-Out value on the network side and is only valid if the sc553NetworkInterfaceType is set for ds1(1). The va… |
| 1.3.6.1.4.1.498.6.11.2.2.1.7 | Columnsc553NetworkOperLineBuildout | read-only | mandatory | This variable is used to report the current Ntwk build-out setting if the sc553NetworkInterfaceType is set for ds1(1). tx00dB(2) indicates the unit is set for … |
| 1.3.6.1.4.1.498.6.11.2.2.1.8 | Columnsc553NetworkOnesDensity | read-write | mandatory | The ones density restriction for the interface. The values of this object define the ones density restriction that is enforced on the interface. The value inhi… |
| 1.3.6.1.4.1.498.6.11.2.2.1.9 | Columnsc553NetworkTransmitClockSource | read-write | mandatory | |
| 1.3.6.1.4.1.498.6.11.2.2.1.10 | Columnsc553NetworkFallbackClockSource | read-write | mandatory | |
| 1.3.6.1.4.1.498.6.11.2.2.1.11 | Columnsc553NetworkFDLdcc | read-write | mandatory | Controls whether or not the DCC uses the FDL as its transport. The FDL is only available when the DS1 line type is ESF, a full DS1 interface is being used, and… |
| 1.3.6.1.4.1.498.6.11.2.2.1.12 | Columnsc553NetworkAISLoopdown | read-write | mandatory | The time in seconds when receiving a continuous AIS signal before a remotely initiated loopback is terminated. When this object has the value 4, then there is … |
| 1.3.6.1.4.1.498.6.11.2.2.1.13 | Columnsc553NetworkLoopbackConfig | read-write | mandatory | This variable is used to set the In-Band DS1 Loopback Code Detection. none(1) refers to when the in-band loopback codes are ignored. payload(2) designates a pa… |
| 1.3.6.1.4.1.498.6.11.2.2.1.14 | Columnsc553NetworkLineCoding | read-write | mandatory | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. sc553B8ZS refers to the u… |
| 1.3.6.1.4.1.498.6.11.2.2.1.15 | Columnsc553NetworkFdl | read-write | mandatory | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: sc553Fdl-none(1) indicates that the device does not use the … |
| 1.3.6.1.4.1.498.6.11.2.3 | Scalarsc553ConfigurationSave | read-write | mandatory | This variable is used to set the update status flag for saving network and channel configuration settings. Management can only set a saveall(2). A norm(1) will… |
| 1.3.6.1.4.1.498.6.11.2.4 | Tablesc553CascadeConfigTable | not-accessible | mandatory | The GDC 553 Cascade Configuration table. |
| 1.3.6.1.4.1.498.6.11.2.4.1 | Rowsc553CascadeConfigEntry | not-accessible | mandatory | The sc553 Cascade Configuration table entry. |
| 1.3.6.1.4.1.498.6.11.2.4.1.1 | Columnsc553CascadeConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.2.4.1.2 | Columnsc553CascadeAdminLineType | read-write | mandatory | The values describe: 'auto' indicates the unit will determine framing. 'manEsf' indicates manual selection of extended superframe format. 'manD4'indicates manu… |
| 1.3.6.1.4.1.498.6.11.2.4.1.3 | Columnsc553CascadeOperLineType | read-only | mandatory | The values describe: 'manEsf' indicates the current setting of Line type. 'manD4'indicates the current setting of Line type. 'unframed' indicates the current s… |
| 1.3.6.1.4.1.498.6.11.2.4.1.4 | Columnsc553CascadeInterfaceType | read-write | mandatory | The operating mode of the interface. Setting the value of this object to ds1(1) configures the interface as standard DS1. Setting the value of this object to d… |
| 1.3.6.1.4.1.498.6.11.2.4.1.5 | Columnsc553CascadePreequalization | read-write | mandatory | Is the preequalization of the transmitter of the interface. This object interoperates with the object sc553CascadeInterfaceType. When the value of sc553Cascade… |
| 1.3.6.1.4.1.498.6.11.2.4.1.6 | Columnsc553CascadeAdminLineBuildout | read-write | mandatory | This variable is used to set the Transmit Ntwk Build-Out value on the cascade side and is only valid if the sc553CascadeInterfaceType is set for ds1(1). The va… |
| 1.3.6.1.4.1.498.6.11.2.4.1.7 | Columnsc553CascadeOperLineBuildout | read-only | mandatory | This variable is used to report the current Ntwk build-out setting if the sc553CascadeInterfaceType is set for ds1(1). tx00dB(2) indicates the unit is set for … |
| 1.3.6.1.4.1.498.6.11.2.4.1.8 | Columnsc553CascadeFDLdcc | read-write | mandatory | Controls whether or not the DCC uses the FDL as its transport. The FDL is only available when the DS1 line type is ESF, a full DS1 interface is being used, and… |
| 1.3.6.1.4.1.498.6.11.2.4.1.9 | Columnsc553CascadeLineCoding | read-write | mandatory | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. sc553B8ZS refers to the u… |
| 1.3.6.1.4.1.498.6.11.2.4.1.10 | Columnsc553CascadeFdl | read-write | mandatory | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: sc553Fdl-none(1) indicates that the device does not use the … |
| 1.3.6.1.4.1.498.6.11.2.4.1.11 | Columnsc553CascadeInService | read-write | mandatory | |
| 1.3.6.1.4.1.498.6.11.2.4.1.12 | Columnsc553CascadeAISLoopdown | read-write | mandatory | The time in seconds when receiving a continuous AIS signal before a remotely initiated loopback is terminated. When this object has the value 4, then there is … |
| 1.3.6.1.4.1.498.6.11.2.4.1.13 | Columnsc553CascadeLoopbackConfig | read-write | mandatory | This variable is used to set the In-Band DS1 Loopback Code Detection. none(1) refers to when the in-band loopback codes are ignored. payload(2) designates a pa… |
| 1.3.6.1.4.1.498.6.11.3 | Nodesc553Diagnostics | |||
| 1.3.6.1.4.1.498.6.11.3.1 | Tablesc553DiagTable | not-accessible | mandatory | The SC553 Diagnostics table. |
| 1.3.6.1.4.1.498.6.11.3.1.1 | Rowsc553DiagEntry | not-accessible | mandatory | The SNMP553S Diagnostics table entry. |
| 1.3.6.1.4.1.498.6.11.3.1.1.1 | Columnsc553DiagIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.3.1.1.2 | Columnsc553DiagTestDuration | read-write | mandatory | Selects the duration to run a diagnostic test. |
| 1.3.6.1.4.1.498.6.11.3.1.1.3 | Columnsc553DiagProgPattern | read-write | mandatory | The 16 bit user programmable test pattern. This object works with the sc553DiagT1SelfTestPattern object in that when it is set to t1ProgPattern(4), the the val… |
| 1.3.6.1.4.1.498.6.11.3.1.1.4 | Columnsc553InsertBitError | read-write | mandatory | A set of 2 will insert one bit error for test. Management may only write a 2. A 1 will always be read. |
| 1.3.6.1.4.1.498.6.11.3.1.1.5 | Columnsc553DiagDS0Number | read-write | mandatory | Indicates the DS0 number for the test. The valid range is between one (1) and twenty-four (24). |
| 1.3.6.1.4.1.498.6.11.3.1.1.6 | Columnsc553DiagT1SelfTestPattern | read-write | mandatory | The selected option is used when a sc553DiagT1Test is performed. |
| 1.3.6.1.4.1.498.6.11.3.1.1.7 | Columnsc553DiagT1Test | read-write | mandatory | |
| 1.3.6.1.4.1.498.6.11.3.1.1.8 | Columnsc553DiagDS0SelfTestPattern | read-write | mandatory | The selected option is used when a sc553DiagDS0Test is performed. |
| 1.3.6.1.4.1.498.6.11.3.1.1.9 | Columnsc553DiagDS0Test | read-write | mandatory | |
| 1.3.6.1.4.1.498.6.11.3.1.1.10 | Columnsc553DiagChannelSelfTestPattern | read-write | mandatory | The selected option is used when a sc553DiagChannelTest is performed. |
| 1.3.6.1.4.1.498.6.11.3.1.1.11 | Columnsc553DiagChannelTest | read-write | mandatory | Reading will indicate the |
| 1.3.6.1.4.1.498.6.11.3.1.1.12 | Columnsc553DiagTestResults | read-only | mandatory | Returns a the folowing bytes. Octet 1 bit 7 - parity bit 6 - f/u bit 5 - 1: Circuit Delay Results or 0: for Bit Error Count bit 4 - 1: Test is in Progress, 0: … |
| 1.3.6.1.4.1.498.6.11.3.1.1.13 | Columnsc553DiagTestStatus | read-only | mandatory | This object will return the test current test in progress, if any. |
| 1.3.6.1.4.1.498.6.11.3.1.1.14 | Columnsc553DiagResetTestToNormal | read-write | mandatory | This object will halt the execution of any and all diagnostic test that may be running with the exception of the Network Delay Test. |
| 1.3.6.1.4.1.498.6.11.3.1.1.15 | Columnsc553DiagResetTestResults | read-write | mandatory | This object will clear the results register while running any test except for Network Delay. Starting a new test will automatically zero out the register. A no… |
| 1.3.6.1.4.1.498.6.11.3.1.1.16 | Columnsc553DiagT1TestDirection | read-write | mandatory | Selects the test direction for T1 tests. |
| 1.3.6.1.4.1.498.6.11.3.1.1.17 | Columnsc553DiagDS0TestDirection | read-write | mandatory | Selects the test direction for DS0 tests. |
| 1.3.6.1.4.1.498.6.11.4 | Nodesc553Maintenance | |||
| 1.3.6.1.4.1.498.6.11.4.1 | Tablesc553MaintenanceTable | not-accessible | mandatory | The table describes the maintenance functions for the sc553. |
| 1.3.6.1.4.1.498.6.11.4.1.1 | Rowsc553MaintenanceEntry | not-accessible | mandatory | An entry in the GDC maintenance Table |
| 1.3.6.1.4.1.498.6.11.4.1.1.1 | Columnsc553MaintenanceIndex | read-only | mandatory | The index value: slot, line, drop, and interface |
| 1.3.6.1.4.1.498.6.11.4.1.1.2 | Columnsc553LedStatus | read-only | mandatory | Returns a bitwise snapshot of the front panel LED state and front panel switches. Octet 1 bit 7 - not used bit 6 - ON (0:LED inactive 1:LED active) bit 5 - f/u… |
| 1.3.6.1.4.1.498.6.11.4.1.1.3 | Columnsc553SoftReset | read-write | mandatory | Supports the action of soft resetting the unit. When this object is set to reset(1), then the unit performs a soft reset. The value norm will be returned when … |
| 1.3.6.1.4.1.498.6.11.4.1.1.4 | Columnsc553DefaultInit | read-write | mandatory | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault, the unit will reset to the … |
| 1.3.6.1.4.1.498.6.11.4.1.1.5 | Columnsc553FrontPanel | read-write | mandatory | This variable is used to indicate whether the front panel switches are operational or not. |
| 1.3.6.1.4.1.498.6.11.4.1.1.6 | Columnsc553ProductType | read-only | mandatory | Indicates the product type of the unit. |
| 1.3.6.1.4.1.498.6.11.4.1.1.7 | Columnsc553ResetStatistics | read-write | mandatory | Supports the action of soft resetting the sc553ValidIntervals object. When this object is set to reset(2), then the unit will reset the sc553ValidIntervals obj… |
| 1.3.6.1.4.1.498.6.11.4.1.1.8 | Columnsc553ValidUserIntervals | read-only | mandatory | The number of previous User intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hour… |
| 1.3.6.1.4.1.498.6.11.4.1.1.9 | Columnsc553ValidNetworkIntervals | read-only | mandatory | The number of previous Network intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 h… |
| 1.3.6.1.4.1.498.6.11.4.1.1.10 | Columnsc553ValidFarEndIntervals | read-only | mandatory | The number of previous Far End intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 h… |
| 1.3.6.1.4.1.498.6.11.4.1.1.11 | Columnsc553CascadePresent | read-only | mandatory | Identifies whether or not the cascade interface cards are installed. |
| 1.3.6.1.4.1.498.6.11.4.1.1.12 | Columnsc553ReceiveLevel | read-only | mandatory | invalidNiDSX1(1) indicates an invalid request because the Network Interface is configured as DSX-1. noSignal(2) is present when there is no T1 signal detected … |
| 1.3.6.1.4.1.498.6.11.4.1.1.13 | Columnsc553DteStat | read-only | mandatory | Returns a bitwise snapshot of the DTE signals. Octet 1 bit 7 - not used bit 6 - CTS (1:ON; 0:OFF) bit 5 - RTS (1:ON; 0:OFF) bit 4 - DTR (1:ON; 0:OFF) bit 3 - D… |
| 1.3.6.1.4.1.498.6.11.4.1.1.14 | Columnsc553CasReceiveLevel | read-only | mandatory | invalidNiDSX1(1) indicates an invalid request because the Cascade Interface is configured as DSX-1. noSignal(2) is present when there is no T1 signal detected … |
| 1.3.6.1.4.1.498.6.11.4.1.1.15 | Columnsc553ShelfType | read-only | mandatory | Type of shelf the sc553 is located in. |
| 1.3.6.1.4.1.498.6.11.4.1.1.16 | Columnsc553TwinPackPowerSupply | read-only | mandatory | Power supplies currently installed in Twin Pack. When the sc553 is located in a Spectracomm shelf none(1) will always be returned. |
| 1.3.6.1.4.1.498.6.11.4.1.1.17 | Columnsc553TestAllLeds | read-write | mandatory | This variable is used to test the front panel leds and individual segments of the display. A one (1) will turn all leds and display segments on. They will rema… |
| 1.3.6.1.4.1.498.6.11.5 | Nodesc553Alarms | |||
| 1.3.6.1.4.1.498.6.11.5.1 | Nodesc553AlarmData | |||
| 1.3.6.1.4.1.498.6.11.5.1.1 | Nodesc553NoResponseAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.2 | Nodesc553DiagRxErrAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.3 | Nodesc553PowerUpAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.4 | Nodesc553NvRamCorruptAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.5 | Nodesc553UnitFailureAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.6 | Nodesc553StatusChangeAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.7 | Nodesc553UnsolicitedTestAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.8 | Nodesc553FrontPanelTestAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.9 | Nodesc553ConfigChangeAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.10 | Nodesc553TimingLossAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.11 | Nodesc553LossOfSignalAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.12 | Nodesc553LossOfFrameAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.13 | Nodesc553AlarmIndicationSignalAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.14 | Nodesc553ReceivedYellowAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.15 | Nodesc553UnavailableSignalStateAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.16 | Nodesc553CrcErrorsAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.17 | Nodesc553BipolarViolationsAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.18 | Nodesc553LowAverageDensityAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.19 | Nodesc553ExternalTXClockLossAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.20 | Nodesc553DCDLossAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.21 | Nodesc553DSRLossAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.22 | Nodesc553DTRLossAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.23 | Nodesc553RXDNoTransitionsAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.24 | Nodesc553TXDNoTransitionsAlm | |||
| 1.3.6.1.4.1.498.6.11.5.1.25 | Nodesc553RedundancyOn | |||
| 1.3.6.1.4.1.498.6.11.5.1.26 | Nodesc553RemoteNotResponding | |||
| 1.3.6.1.4.1.498.6.11.5.1.27 | Nodesc553TopPowerSupplyFail | |||
| 1.3.6.1.4.1.498.6.11.5.1.28 | Nodesc553BottomPowerSupplyFail | |||
| 1.3.6.1.4.1.498.6.11.5.2 | Tablesc553AlarmConfigTable | not-accessible | mandatory | The sc553AlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a unit a… |
| 1.3.6.1.4.1.498.6.11.5.2.1 | Rowsc553AlarmConfigEntry | not-accessible | mandatory | An entry in the GDC Alarm Configuration table. |
| 1.3.6.1.4.1.498.6.11.5.2.1.1 | Columnsc553AlarmConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.6.11.5.2.1.2 | Columnsc553AlarmConfigIdentifier | read-only | mandatory | The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) do… |
| 1.3.6.1.4.1.498.6.11.5.2.1.3 | Columnsc553AlarmCountWindow | read-write | mandatory | This variable sets/reads the alarm window. This window is used with the alarm threshold to determine how long the alarm should be active before reporting. |
| 1.3.6.1.4.1.498.6.11.5.2.1.4 | Columnsc553AlarmCountThreshold | read-write | mandatory | This function sets/reads the alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a given t… |
| 1.3.6.1.4.1.498.6.11.6 | Nodesc553Performance | |||
| 1.3.6.1.4.1.498.6.11.6.1 | Tablesc553CurrentUserTable | not-accessible | mandatory | The sc553 CurrentUser table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.11.6.1.1 | Rowsc553CurrentUserEntry | not-accessible | mandatory | An entry in the sc553 CurrentUser table. |
| 1.3.6.1.4.1.498.6.11.6.1.1.1 | Columnsc553CurrentUserIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.6.1.1.2 | Columnsc553CurrentUserStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - 2^15 Errored Seconds bit 5 - 2^14 bit 4 - 2^15 Severely Errored Seconds bit 3 - 2^… |
| 1.3.6.1.4.1.498.6.11.6.2 | Tablesc553CurrentNetworkTable | not-accessible | mandatory | The sc553 CurrentNetwork table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.11.6.2.1 | Rowsc553CurrentNetworkEntry | not-accessible | mandatory | An entry in the sc553 CurrentNetwork table. |
| 1.3.6.1.4.1.498.6.11.6.2.1.1 | Columnsc553CurrentNetworkIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.6.2.1.2 | Columnsc553CurrentNetworkStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - 2^15 Errored Seconds bit 5 - 2^14 bit 4 - 2^15 Severely Errored Seconds bit 3 - 2^… |
| 1.3.6.1.4.1.498.6.11.6.3 | Tablesc553CurrentFarEndTable | not-accessible | mandatory | The sc553 CurrentFarEnd table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.11.6.3.1 | Rowsc553CurrentFarEndEntry | not-accessible | mandatory | An entry in the sc553 CurrentFarEnd table. |
| 1.3.6.1.4.1.498.6.11.6.3.1.1 | Columnsc553CurrentFarEndIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.6.3.1.2 | Columnsc553CurrentFarEndStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - 2^15 Errored Seconds bit 5 - 2^14 bit 4 - 2^15 Severely Errored Seconds bit 3 - 2^… |
| 1.3.6.1.4.1.498.6.11.6.4 | Tablesc553TotalUserTable | not-accessible | mandatory | The sc553 TotalUser table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.11.6.4.1 | Rowsc553TotalUserEntry | not-accessible | mandatory | An entry in the sc553 TotalUser table. |
| 1.3.6.1.4.1.498.6.11.6.4.1.1 | Columnsc553TotalUserIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.6.4.1.2 | Columnsc553TotalUserStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - 2^15 Errored Seconds bit 5 - 2^14 bit 4 - 2^15 Severely Errored Seconds bit 3 - 2^… |
| 1.3.6.1.4.1.498.6.11.6.5 | Tablesc553TotalNetworkTable | not-accessible | mandatory | The sc553 TotalNetwork table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.11.6.5.1 | Rowsc553TotalNetworkEntry | not-accessible | mandatory | An entry in the sc553 TotalNetwork table. |
| 1.3.6.1.4.1.498.6.11.6.5.1.1 | Columnsc553TotalNetworkIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.6.5.1.2 | Columnsc553TotalNetworkStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - 2^15 Errored Seconds bit 5 - 2^14 bit 4 - 2^15 Severely Errored Seconds bit 3 - 2^… |
| 1.3.6.1.4.1.498.6.11.6.6 | Tablesc553TotalFarEndTable | not-accessible | mandatory | The sc553 TotalFarEnd table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.11.6.6.1 | Rowsc553TotalFarEndEntry | not-accessible | mandatory | An entry in the sc553 TotalFarEnd table. |
| 1.3.6.1.4.1.498.6.11.6.6.1.1 | Columnsc553TotalFarEndIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.6.6.1.2 | Columnsc553TotalFarEndStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - 2^15 Errored Seconds bit 5 - 2^14 bit 4 - 2^15 Severely Errored Seconds bit 3 - 2^… |
| 1.3.6.1.4.1.498.6.11.6.7 | Tablesc553UserIntervalTable | not-accessible | mandatory | The sc553 User Interval table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.11.6.7.1 | Rowsc553UserIntervalEntry | not-accessible | mandatory | An entry in the DS1 Interval table. |
| 1.3.6.1.4.1.498.6.11.6.7.1.1 | Columnsc553UserIntervalIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.6.7.1.2 | Columnsc553UserIntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed minute interval and 96 is the least recently completed 15 minutes interval (assuming that all… |
| 1.3.6.1.4.1.498.6.11.6.7.1.3 | Columnsc553UserIntervalStats | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - 2^15 Errored Seconds bit 5 - 2^14 bit 4 - 2^15 Severely Errored Seconds bit 3 - 2^… |
| 1.3.6.1.4.1.498.6.11.6.8 | Tablesc553NetworkIntervalTable | not-accessible | mandatory | The sc553 Network Interval table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.11.6.8.1 | Rowsc553NetworkIntervalEntry | not-accessible | mandatory | An entry in the DS1 Interval table. |
| 1.3.6.1.4.1.498.6.11.6.8.1.1 | Columnsc553NetworkIntervalIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.6.8.1.2 | Columnsc553NetworkIntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed minute interval and 96 is the least recently completed 15 minutes interval (assuming that all… |
| 1.3.6.1.4.1.498.6.11.6.8.1.3 | Columnsc553NetworkIntervalStats | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - 2^15 Errored Seconds bit 5 - 2^14 bit 4 - 2^15 Severely Errored Seconds bit 3 - 2^… |
| 1.3.6.1.4.1.498.6.11.6.9 | Tablesc553FarEndIntervalTable | not-accessible | mandatory | The sc553 FarEnd Interval table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.11.6.9.1 | Rowsc553FarEndIntervalEntry | not-accessible | mandatory | An entry in the DS1 Interval table. |
| 1.3.6.1.4.1.498.6.11.6.9.1.1 | Columnsc553FarEndIntervalIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.11.6.9.1.2 | Columnsc553FarEndIntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed minute interval and 96 is the least recently completed 15 minutes interval (assuming that all… |
| 1.3.6.1.4.1.498.6.11.6.9.1.3 | Columnsc553FarEndIntervalStats | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - 2^15 Errored Seconds bit 5 - 2^14 bit 4 - 2^15 Severely Errored Seconds bit 3 - 2^… |
| 1.3.6.1.4.1.498.6.11.6.10 | Scalarsc553StoreUserTotals | read-write | mandatory | A set of this object will be broadcasted to every sc553 in the shelf. Upon receiving the broadcast, the sc553 will write the contents of sc553TotalUserStat to … |
| 1.3.6.1.4.1.498.6.11.6.11 | Scalarsc553StoreUserIntervals | read-write | mandatory | A set of this object will be broadcasted to every sc553 in the shelf. Upon receiving the broadcast, the sc553 will write the contents of sc553UserIntervalStats… |
| 1.3.6.1.4.1.498.6.11.6.12 | Scalarsc553ShelfUserTotals | read-only | mandatory | Collects the User Totals that were stored by the set of sc553StoreUserTotals for all sc553s in the shelf. The data for each sc553 is contained in 15 octet grou… |
| 1.3.6.1.4.1.498.6.11.6.13 | Tablesc553ShelfUserIntvlsTable | not-accessible | mandatory | The sc553ShelfUserIntvlsTable contains the user statistics for all sc553s in the shelf. |
| 1.3.6.1.4.1.498.6.11.6.13.1 | Rowsc553ShelfUserIntervalsEntry | not-accessible | mandatory | An entry in the Shelf User Intervals table. |
| 1.3.6.1.4.1.498.6.11.6.13.1.1 | Columnsc553ShelfUserIntvlsIndex | read-only | mandatory | The index value which uniquely determines the interval. |
| 1.3.6.1.4.1.498.6.11.6.13.1.2 | Columnsc553ShelfUserIntervals | read-only | mandatory | Collects the User Statistics that were stored by the set of sc553StoreUserIntervals for the interval given by sc553ShelfUserIntervalsIndex for all sc553s in th… |