GDC-SC800T3-MIB
153 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.19 | Nodeds3 | |||
| 1.3.6.1.4.1.498.19.1 | Nodesc800t3 | |||
| 1.3.6.1.4.1.498.19.1.1 | Nodesc800t3Version | |||
| 1.3.6.1.4.1.498.19.1.1.1 | Scalarsc800t3MIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |
| 1.3.6.1.4.1.498.19.1.1.2 | Tablesc800t3VersionTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.498.19.1.1.2.1 | Rowsc800t3VersionEntry | not-accessible | mandatory | An entry in the GDC SC800T3 Version Table. |
| 1.3.6.1.4.1.498.19.1.1.2.1.1 | Columnsc800t3VersionIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.1.2.1.2 | Columnsc800t3ActiveFirmwareRev | read-only | mandatory | The version number of the firmware currently executing. The format is MM.NN.BB where: MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix Revision … |
| 1.3.6.1.4.1.498.19.1.1.2.1.3 | Columnsc800t3StandbyFirmwareRev | read-only | mandatory | The version number of the firmware stored (in a compressed format) but not currently executing. MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix… |
| 1.3.6.1.4.1.498.19.1.1.2.1.4 | Columnsc800t3StoredFirmwareStatus | read-only | mandatory | This object represents the state of the Non-Active or Stored firmware: statBlank(1) Factory Default statDownLoading(2) In process of downloading firmware statO… |
| 1.3.6.1.4.1.498.19.1.1.2.1.5 | Columnsc800t3SwitchActiveFirmware | read-write | mandatory | This object is used to switch the active executing firmware from the version in sc800t3ActiveRev to the version in sc800t3StoredRev. When a switchActive(2) is … |
| 1.3.6.1.4.1.498.19.1.1.2.1.6 | Columnsc800t3DownloadingMode | read-write | mandatory | This object is used to configure the download mode: disableAll(1) Prevents any firmware downloading to SC800T3 enableAndWait(2) Allows downloading zipped code … |
| 1.3.6.1.4.1.498.19.1.1.2.1.7 | Columnsc800t3EraseFlash | read-write | mandatory | A set of this object to erase(2) will erase the application stored in flash. After setting this object, there should be a delay of at least 2 minutes before do… |
| 1.3.6.1.4.1.498.19.1.2 | Nodesc800t3Configuration | |||
| 1.3.6.1.4.1.498.19.1.2.1 | Tablesc800t3ChannelConfigTable | not-accessible | mandatory | The GDC SC800T3 Channel Configuration table. |
| 1.3.6.1.4.1.498.19.1.2.1.1 | Rowsc800t3ChannelConfigEntry | not-accessible | mandatory | The sc800t3 Channel Configuration table entry. |
| 1.3.6.1.4.1.498.19.1.2.1.1.1 | Columnsc800t3ChannelConfigIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.2.1.1.2 | Columnsc800t3ForcedDCE | read-write | mandatory | Controls the operation of Data Communications Equipment (DCE) signal. The value followsDte(1) indicates that the channel's DCE follows Data Terminal Equipment … |
| 1.3.6.1.4.1.498.19.1.2.1.1.3 | Columnsc800t3ChannelDTEtest | read-write | mandatory | DTE interface supporting loop A and loop B tests. See ANSI TIA/EIA-613-1993 specification for details on encoding of inter changes. |
| 1.3.6.1.4.1.498.19.1.2.1.1.4 | Columnsc800t3DTELoopTimeout | read-write | mandatory | Enables/disables DTE loop time out. |
| 1.3.6.1.4.1.498.19.1.2.2 | Tablesc800t3NetworkConfigTable | not-accessible | mandatory | The GDC SC800T3 Network Configuration table. |
| 1.3.6.1.4.1.498.19.1.2.2.1 | Rowsc800t3NetworkConfigEntry | not-accessible | mandatory | The sc800t3 Network Configuration table entry. |
| 1.3.6.1.4.1.498.19.1.2.2.1.1 | Columnsc800t3NetworkConfigIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.2.2.1.2 | Columnsc800t3NetworkFrameType | read-write | mandatory | Is the framing type of the network interface. Setting the value of the object to m13(1) configures the network interface to M-13 framing. Setting the value of … |
| 1.3.6.1.4.1.498.19.1.2.2.1.3 | Columnsc800t3NetworkTransmitClockSource | read-write | mandatory | The DSU transmit clock source option. This is the selection for the transmitter timing clock source. |
| 1.3.6.1.4.1.498.19.1.2.2.1.4 | Columnsc800t3NetworkAISLoopdown | read-write | mandatory | The time in seconds when receiving a continuous AIS signal before a remotely initiated loopback is terminated. When this object has the value 4, then there is … |
| 1.3.6.1.4.1.498.19.1.2.2.1.5 | Columnsc800t3NetworkLineType | read-write | mandatory | The operating mode of the interface. Setting the value of this object to longCable(1) configures the interface as standard DS-3. Setting the value of this obje… |
| 1.3.6.1.4.1.498.19.1.2.2.1.6 | Columnsc800t3NetworkIdleStatus | read-only | mandatory | Returns a value of received(2) when the sc800t3 receives a DS3 idle from the network. |
| 1.3.6.1.4.1.498.19.1.2.2.1.7 | Columnsc800t3NetworkTransmitIdleStatus | read-write | mandatory | When set to active(2), the sc800t3 will transmit a DS3 idle signal to the network. |
| 1.3.6.1.4.1.498.19.1.2.2.1.8 | Columnsc800t3NetworkSesBERThreshold | read-write | mandatory | When set to thresone(1), the SES BER threshold will be set to 1X10^-6 and when it is set to thresseven(2), it will be set to 7.5X10^-5. |
| 1.3.6.1.4.1.498.19.1.2.2.1.9 | Columnsc800t3InbandLoopback | read-write | mandatory | Enables/disables the inband loop back. |
| 1.3.6.1.4.1.498.19.1.3 | Nodesc800t3Diagnostics | |||
| 1.3.6.1.4.1.498.19.1.3.1 | Tablesc800t3DiagTable | not-accessible | mandatory | The SC800T3 Diagnostics table. |
| 1.3.6.1.4.1.498.19.1.3.1.1 | Rowsc800t3DiagEntry | not-accessible | mandatory | The SNMPSC800T3 Diagnostics table entry. |
| 1.3.6.1.4.1.498.19.1.3.1.1.1 | Columnsc800t3DiagIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.3.1.1.2 | Columnsc800t3DiagTestDuration | read-write | mandatory | Selects the duration to run a diagnostic test. |
| 1.3.6.1.4.1.498.19.1.3.1.1.3 | Columnsc800t3InsertBitError | read-write | mandatory | A set of 2 will insert one bit error for test. Management may only write a 2. A 1 will always be read. |
| 1.3.6.1.4.1.498.19.1.3.1.1.4 | Columnsc800t3DiagT3Test | read-write | mandatory | A set of 2-11 starts the specified test and a set of t3NoTest(1) stops the current running test. A get returns the current active test. |
| 1.3.6.1.4.1.498.19.1.3.1.1.5 | Columnsc800t3DiagTestResults | read-only | mandatory | Returns a the folowing bytes. Octet 1 bit 7 - F/U bit 6 - 1: Test complete bit 5 - 1: Test aborted bit 4 - F/U bit 3 - remote status 0: inactive 1: active bit … |
| 1.3.6.1.4.1.498.19.1.3.1.1.6 | Columnsc800t3DiagResetTestResults | read-write | mandatory | This object will clear the results register while running any test except for Network Delay. Starting a new test will automatically zero out the register. A no… |
| 1.3.6.1.4.1.498.19.1.4 | Nodesc800t3Maintenance | |||
| 1.3.6.1.4.1.498.19.1.4.1 | Tablesc800t3MaintenanceTable | not-accessible | mandatory | The table describes the maintenance functions for the sc800t3. |
| 1.3.6.1.4.1.498.19.1.4.1.1 | Rowsc800t3MaintenanceEntry | not-accessible | mandatory | An entry in the GDC maintenance Table |
| 1.3.6.1.4.1.498.19.1.4.1.1.1 | Columnsc800t3MaintenanceIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.4.1.1.2 | Columnsc800t3LedStatus | read-only | mandatory | Returns a bitwise snapshot of the front panel LED state and front panel switches. Octet 1 bit 7 - f/u bit 6 - NTWK 0:LED off 1:LED on bit 5 - TM 0:LED off 1:LE… |
| 1.3.6.1.4.1.498.19.1.4.1.1.3 | Columnsc800t3SoftReset | read-write | mandatory | Supports the action of soft resetting the unit. When this object is set to reset(1), then the unit performs a soft reset. The value norm will be returned when … |
| 1.3.6.1.4.1.498.19.1.4.1.1.4 | Columnsc800t3DefaultInit | read-write | mandatory | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault, the unit will reset to the … |
| 1.3.6.1.4.1.498.19.1.4.1.1.5 | Columnsc800t3ValidNearEndIntervals | read-only | mandatory | The number of previous near end intervals for which valid data was collected. The value will be 31 unless the interface was brought on-line within the last 7.7… |
| 1.3.6.1.4.1.498.19.1.4.1.1.6 | Columnsc800t3ValidFarEndIntervals | read-only | mandatory | The number of previous far end intervals for which valid data was collected. The value will be 31 unless the interface was brought on-line within the last 7.75… |
| 1.3.6.1.4.1.498.19.1.4.1.1.7 | Columnsc800t3ShelfType | read-only | mandatory | Type of shelf the sc800t3 is located in. |
| 1.3.6.1.4.1.498.19.1.4.1.1.8 | Columnsc800t3TwinPackPowerSupply | read-only | mandatory | Power supplies currently installed in Twin Pack. When the sc800t3 is located in a Spectracomm shelf none(1) will always be returned. |
| 1.3.6.1.4.1.498.19.1.4.1.1.9 | Columnsc800t3TestAllLeds | read-write | mandatory | This variable is used to test the front panel leds and individual segments of the display. A one (1) will turn all leds and display segments on. They will rema… |
| 1.3.6.1.4.1.498.19.1.4.1.1.10 | Columnsc800t3NearEndResetStats | read-write | mandatory | Supports the action of soft resetting the sc800t3ValidNearEndIntervals object. When this object is set to reset(2), then the unit will reset the sc800t3ValidNe… |
| 1.3.6.1.4.1.498.19.1.4.1.1.11 | Columnsc800t3FarEndResetStats | read-write | mandatory | Supports the action of soft resetting the sc800t3ValidFarEndIntervals object. When this object is set to reset(2), then the unit will reset the sc800t3ValidFar… |
| 1.3.6.1.4.1.498.19.1.4.1.1.12 | Columnsc800t3NearEndStatLastInitial | read-only | mandatory | Number of seconds from midnight Dec 31 1969 up until sc800t3ValidNearEndIntervals was last initialized to zero. |
| 1.3.6.1.4.1.498.19.1.4.1.1.13 | Columnsc800t3FarEndStatLastInitial | read-only | mandatory | Number of seconds from midnight Dec 31 1969 up until sc800t3ValidFarEndIntervals was last initialized to zero. |
| 1.3.6.1.4.1.498.19.1.5 | Nodesc800t3Alarms | |||
| 1.3.6.1.4.1.498.19.1.5.1 | Nodesc800t3NoResponse | |||
| 1.3.6.1.4.1.498.19.1.5.2 | Nodesc800t3DiagRxErrAlm | |||
| 1.3.6.1.4.1.498.19.1.5.3 | Nodesc800t3PowerUpAlm | |||
| 1.3.6.1.4.1.498.19.1.5.4 | Nodesc800t3POSTFail | |||
| 1.3.6.1.4.1.498.19.1.5.5 | Nodesc800t3UnsolicitedTest | |||
| 1.3.6.1.4.1.498.19.1.5.6 | Nodesc800t3ConfigChange | |||
| 1.3.6.1.4.1.498.19.1.5.7 | Nodesc800t3TimingLoss | |||
| 1.3.6.1.4.1.498.19.1.5.8 | Nodesc800t3LossOfSignal | |||
| 1.3.6.1.4.1.498.19.1.5.9 | Nodesc800t3OutOfFrame | |||
| 1.3.6.1.4.1.498.19.1.5.10 | Nodesc800t3AIS | |||
| 1.3.6.1.4.1.498.19.1.5.11 | Nodesc800t3DTEReadyLoss | |||
| 1.3.6.1.4.1.498.19.1.5.12 | Nodesc800t3DTETXCLKLoss | |||
| 1.3.6.1.4.1.498.19.1.5.13 | Nodesc800t3RXDNoTrans | |||
| 1.3.6.1.4.1.498.19.1.5.14 | Nodesc800t3TXDNoTrans | |||
| 1.3.6.1.4.1.498.19.1.5.15 | Nodesc800t3RemoteNotResponding | |||
| 1.3.6.1.4.1.498.19.1.5.16 | Nodesc800t3TopPowerSupplyFail | |||
| 1.3.6.1.4.1.498.19.1.5.17 | Nodesc800t3BottomPowerSupplyFail | |||
| 1.3.6.1.4.1.498.19.1.5.18 | Nodesc800t3DTETest | |||
| 1.3.6.1.4.1.498.19.1.5.19 | Nodesc800t3RAI | |||
| 1.3.6.1.4.1.498.19.1.5.20 | Nodesc800t3ES | |||
| 1.3.6.1.4.1.498.19.1.5.21 | Nodesc800t3SES | |||
| 1.3.6.1.4.1.498.19.1.5.22 | Nodesc800t3SAS | |||
| 1.3.6.1.4.1.498.19.1.5.23 | Nodesc800t3UAS | |||
| 1.3.6.1.4.1.498.19.1.5.24 | Nodesc800t3CodeViolations | |||
| 1.3.6.1.4.1.498.19.1.5.25 | Nodesc800t3ESline | |||
| 1.3.6.1.4.1.498.19.1.6 | Nodesc800t3Performance | |||
| 1.3.6.1.4.1.498.19.1.6.1 | Tablesc800t3CurrentNearEndTable | not-accessible | mandatory | Gives the statistic count for the current 15 minute interval. |
| 1.3.6.1.4.1.498.19.1.6.1.1 | Rowsc800t3CurrentNearEndEntry | not-accessible | mandatory | An entry in the sc800t3 CurrentNearEnd table. |
| 1.3.6.1.4.1.498.19.1.6.1.1.1 | Columnsc800t3CurrentNearEndIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.6.1.1.2 | Columnsc800t3CurrentNearEndStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - Invalid Data Flag bit 5 - n/a bit 4 - n/a bit 3 - n/a bit 2 - 2^9 Errored Seconds … |
| 1.3.6.1.4.1.498.19.1.6.2 | Tablesc800t3PreviousDayNearEndTable | not-accessible | mandatory | Gives totals for the previous day of all the near end statistics. |
| 1.3.6.1.4.1.498.19.1.6.2.1 | Rowsc800t3PreviousDayNearEndEntry | not-accessible | mandatory | An entry in the sc800t3 PreviousDayNearEndTable. |
| 1.3.6.1.4.1.498.19.1.6.2.1.1 | Columnsc800t3PreviousDayNearEndIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.6.2.1.2 | Columnsc800t3PreviousDayNearEndStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - Invalid Data Flag bit 5 - n/a bit 4 - n/a bit 3 - n/a bit 2 - n/a bit 1 - 2^15 Err… |
| 1.3.6.1.4.1.498.19.1.6.3 | Tablesc800t3CurrentFarEndTable | not-accessible | mandatory | Gives the statistic count for the current 15 minute interval. |
| 1.3.6.1.4.1.498.19.1.6.3.1 | Rowsc800t3CurrentFarEndEntry | not-accessible | mandatory | An entry in the sc800t3 CurrentFarEnd table. |
| 1.3.6.1.4.1.498.19.1.6.3.1.1 | Columnsc800t3CurrentFarEndIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.6.3.1.2 | Columnsc800t3CurrentFarEndStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - Invalid Data Flag bit 5 - n/a bit 4 - n/a bit 3 - n/a bit 2 - 2^9 Errored Seconds … |
| 1.3.6.1.4.1.498.19.1.6.4 | Tablesc800t3CurrentDayNearEndTable | not-accessible | mandatory | Gives totals for the current day of all the near end statistics. |
| 1.3.6.1.4.1.498.19.1.6.4.1 | Rowsc800t3CurrentDayNearEndEntry | not-accessible | mandatory | An entry in the sc800t3 CurrentDayNearEndTable. |
| 1.3.6.1.4.1.498.19.1.6.4.1.1 | Columnsc800t3CurrentDayNearEndIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.6.4.1.2 | Columnsc800t3CurrentDayNearEndStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - Invalid Data Flag bit 5 - n/a bit 4 - n/a bit 3 - n/a bit 2 - n/a bit 1 - 2^15 Err… |
| 1.3.6.1.4.1.498.19.1.6.5 | Tablesc800t3PreviousDayFarEndTable | not-accessible | mandatory | Gives totals for the previous day of all the Far End statistics. |
| 1.3.6.1.4.1.498.19.1.6.5.1 | Rowsc800t3PreviousDayFarEndEntry | not-accessible | mandatory | An entry in the sc800t3PreviousDayFarEndTable. |
| 1.3.6.1.4.1.498.19.1.6.5.1.1 | Columnsc800t3PreviousDayFarEndIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.6.5.1.2 | Columnsc800t3PreviousDayFarEndStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - Invalid Data Flag bit 5 - n/a bit 4 - n/a bit 3 - n/a bit 2 - n/a bit 1 - 2^15 Err… |
| 1.3.6.1.4.1.498.19.1.6.6 | Tablesc800t3CurrentDayFarEndTable | not-accessible | mandatory | Gives totals for the current day of all the Far End statistics. |
| 1.3.6.1.4.1.498.19.1.6.6.1 | Rowsc800t3CurrentDayFarEndEntry | not-accessible | mandatory | An entry in the sc800t3CurrentDayFarEndTable. |
| 1.3.6.1.4.1.498.19.1.6.6.1.1 | Columnsc800t3CurrentDayFarEndIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.6.6.1.2 | Columnsc800t3CurrentDayFarEndStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - Invalid Data Flag bit 5 - n/a bit 4 - n/a bit 3 - n/a bit 2 - n/a bit 1 - 2^15 Err… |
| 1.3.6.1.4.1.498.19.1.6.7 | Tablesc800t3NearEndIntervalTable | not-accessible | mandatory | The sc800t3 Near End Interval table. |
| 1.3.6.1.4.1.498.19.1.6.7.1 | Rowsc800t3NearEndIntervalEntry | not-accessible | mandatory | An entry in the Interval table. |
| 1.3.6.1.4.1.498.19.1.6.7.1.1 | Columnsc800t3NearEndIntervalIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.6.7.1.2 | Columnsc800t3NearEndIntervalNumber | read-only | mandatory | A number between 1 and 31, where 1 is the most recently completed minute interval and 31 is the least recently completed 15 minutes interval (assuming that all… |
| 1.3.6.1.4.1.498.19.1.6.7.1.3 | Columnsc800t3NearEndIntervalStats | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - Invalid Data Flag bit 5 - n/a bit 4 - n/a bit 3 - n/a bit 2 - 2^9 Errored Seconds … |
| 1.3.6.1.4.1.498.19.1.6.9 | Tablesc800t3FarEndIntervalTable | not-accessible | mandatory | The sc800t3 Far End Interval table. |
| 1.3.6.1.4.1.498.19.1.6.9.1 | Rowsc800t3FarEndIntervalEntry | not-accessible | mandatory | An entry in the Interval table. |
| 1.3.6.1.4.1.498.19.1.6.9.1.1 | Columnsc800t3FarEndIntervalIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.6.9.1.2 | Columnsc800t3FarEndIntervalNumber | read-only | mandatory | A number between 1 and 31, where 1 is the most recently completed minute interval and 31 is the least recently completed 15 minutes interval (assuming that all… |
| 1.3.6.1.4.1.498.19.1.6.9.1.3 | Columnsc800t3FarEndIntervalStats | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - Invalid Data Flag bit 5 - n/a bit 4 - n/a bit 3 - n/a bit 2 - 2^9 Errored Seconds … |
| 1.3.6.1.4.1.498.19.1.6.10 | Tablesc800t3PreviousNearEndTable | not-accessible | mandatory | Gives the statistic count for the previous 15 minute interval. |
| 1.3.6.1.4.1.498.19.1.6.10.1 | Rowsc800t3PreviousNearEndEntry | not-accessible | mandatory | An entry in the sc800t3 PreviousNearEnd table. |
| 1.3.6.1.4.1.498.19.1.6.10.1.1 | Columnsc800t3PreviousNearEndIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.6.10.1.2 | Columnsc800t3PreviousNearEndStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - f/u bit 6 - Invalid Data Flag bit 5 - n/a bit 4 - n/a bit 3 - n/a bit 2 - 2^9 Errored Seconds (ES… |
| 1.3.6.1.4.1.498.19.1.6.11 | Tablesc800t3PreviousFarEndTable | not-accessible | mandatory | Gives the statistic count for the previous 15 minute interval. |
| 1.3.6.1.4.1.498.19.1.6.11.1 | Rowsc800t3PreviousFarEndEntry | not-accessible | mandatory | An entry in the sc800t3 PreviousFarEnd table. |
| 1.3.6.1.4.1.498.19.1.6.11.1.1 | Columnsc800t3PreviousFarEndIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.6.11.1.2 | Columnsc800t3PreviousFarEndStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - f/u bit 6 - Invalid Data Flag bit 5 - n/a bit 4 - n/a bit 3 - n/a bit 2 - 2^9 Errored Seconds (ES… |
| 1.3.6.1.4.1.498.19.1.7 | Nodesc800t3AlarmConfig | |||
| 1.3.6.1.4.1.498.19.1.7.1 | Tablesc800t3AlarmConfigTable | not-accessible | mandatory | The sc800t3AlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a unit… |
| 1.3.6.1.4.1.498.19.1.7.1.1 | Rowsc800t3AlarmConfigEntry | not-accessible | mandatory | An entry in the GDC Alarm Configuration table. |
| 1.3.6.1.4.1.498.19.1.7.1.1.1 | Columnsc800t3AlarmConfigIndex | read-only | mandatory | Integer value which uniquely identifies the SC800T3 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.19.1.7.1.1.2 | Columnsc800t3AlarmConfigIdentifier | read-only | mandatory | format: iso.org.dod.internet.private.enterprises.gdc. ds3.sc800t3.sc800t3Alarms.ALM example: 1.3.6.1.4.1.498.19.1.5.ALM where ALM = 1 for sc800t3NoResponse ala… |
| 1.3.6.1.4.1.498.19.1.7.1.1.3 | Columnsc800t3AlarmCountWindow | read-write | mandatory | This variable sets/reads the alarm window. This window is used with the alarm threshold to determine how long the alarm should be active before reporting. |
| 1.3.6.1.4.1.498.19.1.7.1.1.4 | Columnsc800t3AlarmCountThreshold | read-write | mandatory | This function sets/reads the alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a given t… |
| 1.3.6.1.4.1.498.19.1.8 | Nodesc800t3LocalAlarms | |||
| 1.3.6.1.4.1.498.19.1.8.1 | Tablesc800t3LocalAlarmConfigTable | not-accessible | mandatory | The sc800t3LocalAlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a… |
| 1.3.6.1.4.1.498.19.1.8.1.1 | Rowsc800t3LocalAlarmConfigEntry | not-accessible | mandatory | An entry in the GDC Local Alarm Configuration table. |
| 1.3.6.1.4.1.498.19.1.8.1.1.1 | Columnsc800t3LocalAlarmConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.19.1.8.1.1.2 | Columnsc800t3OOF | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.3 | Columnsc800t3AISLOCAL | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.4 | Columnsc800t3TIMLOS | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.5 | Columnsc800t3TXDLOS | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.6 | Columnsc800t3RXDLOS | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.7 | Columnsc800t3LOS | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.8 | Columnsc800t3TPSFAIL | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.9 | Columnsc800t3BPSFAIL | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.10 | Columnsc800t3DTECLKLOS | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.11 | Columnsc800t3DTERDYLOS | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.12 | Columnsc800t3RAILOCAL | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.13 | Columnsc800t3THRESHESL | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.14 | Columnsc800t3THRESHES | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.15 | Columnsc800t3THRESHSES | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.16 | Columnsc800t3THRESHSAS | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.17 | Columnsc800t3THRESHUAS | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.19.1.8.1.1.18 | Columnsc800t3THRESHCV | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |