GDCDSX1-MIB
128 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.6 | Nodedsx1 | |||
| 1.3.6.1.4.1.498.6.1 | NodegdcDsx1System | |||
| 1.3.6.1.4.1.498.6.1.1 | NodegdcDsx1Version | |||
| 1.3.6.1.4.1.498.6.1.1.1 | ScalargdcDsx1SystemMIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |
| 1.3.6.1.4.1.498.6.1.1.2 | TablegdcDsx1VersionTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.498.6.1.1.2.1 | RowgdcDsx1VersionEntry | not-accessible | mandatory | An entry in the GDC gdcDsx1 Version Table. |
| 1.3.6.1.4.1.498.6.1.1.2.1.1 | ColumngdcDsx1VersionIndex | read-only | mandatory | Identifies Version parameters associated with the managed object. |
| 1.3.6.1.4.1.498.6.1.1.2.1.2 | ColumngdcDsx1FirmwareRev | read-only | mandatory | The version number of the bootstrap firmware. The version number of the firmware, to allow products to know which revision is installed. The released version n… |
| 1.3.6.1.4.1.498.6.1.1.2.1.3 | ColumngdcDsx1ModelNumber | read-only | mandatory | This variable is used to determine the type of card family installed ex. SC5001, SC5002. |
| 1.3.6.1.4.1.498.6.1.1.2.1.4 | ColumngdcDsx1ActiveFirmwareRev | read-only | mandatory | The version number of the firmware currently executing. The format is MM.NN.BB where: MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix Revision … |
| 1.3.6.1.4.1.498.6.1.1.2.1.5 | ColumngdcDsx1StoredFirmwareRev | read-only | mandatory | The version number of the firmware stored (in a compressed format) but not currently executing. MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix… |
| 1.3.6.1.4.1.498.6.1.1.2.1.6 | ColumngdcDsx1BootRev | read-only | mandatory | The version number of the bootstrap firmware. The version number of the firmware, to allow products to know which revision is installed. The released version n… |
| 1.3.6.1.4.1.498.6.1.1.2.1.7 | ColumngdcDsx1StoredFirmwareStatus | read-only | mandatory | This object represents the state of the Non-Active or Stored firmware: statBlank(1) Factory Default statDownLoading(2) In process of downloading firmware statO… |
| 1.3.6.1.4.1.498.6.1.1.2.1.8 | ColumngdcDsx1SwitchActiveFirmware | read-write | mandatory | This object is used to switch the active executing firmware from the version in gdcDsx1ActiveRev to the version in gdcDsx1StoredRev. When a switchActive(2) is … |
| 1.3.6.1.4.1.498.6.1.1.2.1.9 | ColumngdcDsx1DownloadingMode | read-write | mandatory | This object is used to configure the download mode: disableAll(1) Prevents any firmware downloading to gdcDsx1 enableAndWait(2) Allows downloading zipped code … |
| 1.3.6.1.4.1.498.6.1.2 | NodegdcDsx1Maintenance | |||
| 1.3.6.1.4.1.498.6.1.2.1 | TablegdcDsx1MaintenanceTable | not-accessible | mandatory | The table describes the maintenance objects for the unit and references the unit interface (cc = 00). |
| 1.3.6.1.4.1.498.6.1.2.1.1 | RowgdcDsx1MaintenanceEntry | not-accessible | mandatory | An entry in the GDC ltu Maintenance Configuration Table. |
| 1.3.6.1.4.1.498.6.1.2.1.1.1 | ColumngdcDsx1MaintenanceLineIndex | read-only | mandatory | This object identifies Maintenance parameters associated with the managed object. |
| 1.3.6.1.4.1.498.6.1.2.1.1.2 | ColumngdcDsx1SoftReset | read-write | mandatory | Supports the action of soft resetting the unit. When this object is set to reset(1), then the unit performs a soft reset, whose meaning is specific to the type… |
| 1.3.6.1.4.1.498.6.1.2.1.1.4 | ColumngdcDsx1ConfigMode | read-only | mandatory | The hardware configuration mode of the unit. A unit may be configured through hardware switches, jumper, straps, etc. The value software(2) indicates that the … |
| 1.3.6.1.4.1.498.6.1.2.1.1.5 | ColumngdcDsx1FrontPanel | read-write | mandatory | This variable is used to indicate whether the front panel switches are operational or not. 'inhibit' refers to when the front panel switches are not operationa… |
| 1.3.6.1.4.1.498.6.1.2.1.1.6 | ColumngdcDsx1SysUpTime | read-only | mandatory | This variable is used to report the elapsed system tick time for conversion to real time at the controller and is not related to the sysUpTime referenced in MI… |
| 1.3.6.1.4.1.498.6.1.2.1.1.7 | ColumngdcDsx1DefaultInit | read-write | mandatory | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault(1) the unit will perform a r… |
| 1.3.6.1.4.1.498.6.1.2.1.1.8 | ColumngdcDsx1ResetStats | read-write | mandatory | Supports the action of soft resetting the dsx1ValidIntervals object. When this object is set to reset(9), then the unit will reset the dsx1ValidIntervals objec… |
| 1.3.6.1.4.1.498.6.1.2.1.1.9 | ColumngdcDsx1LedStatus | read-only | mandatory | Returns a bitwise snapshot of the front panel LED state. Octet 1 bit 7 - not used bit 6 - ON bit 5 - INSV bit 4 - RSP bit 3 - TMG bit 2 - EQ LAD bit 1 - EQ 0'S… |
| 1.3.6.1.4.1.498.6.1.2.1.1.10 | ColumngdcDsx1SetTransmitClkSrc | read-write | mandatory | 'txClkSrc' indicates the unit is using the optioned clock source as indicated by the dsx1TransmitClockSource variable in the RFC1406 mib or the gdcDsx1Transmit… |
| 1.3.6.1.4.1.498.6.1.2.1.1.11 | ColumngdcDsx1CsuMode | read-write | mandatory | 'csuMode' indicates the unit is operating as a T1 channel service unit with the payload from the network interface connected to the payload of the cascade inte… |
| 1.3.6.1.4.1.498.6.1.2.1.1.12 | ColumngdcDsx1CircuitIdentifier1 | read-write | mandatory | Private data storage area of sixteen bytes. |
| 1.3.6.1.4.1.498.6.1.2.1.1.13 | ColumngdcDsx1CircuitIdentifier2 | read-write | mandatory | Private data storage area of sixteen bytes. |
| 1.3.6.1.4.1.498.6.1.3 | NodegdcDsx1Configuration | |||
| 1.3.6.1.4.1.498.6.1.3.1 | TablegdcDsx1ConfigTable | not-accessible | mandatory | The GDC DS1 Configuration table. Information in the entries of this table augment the entries in the DS1 Configuration table of the DS1 MIB defined in RFC 1406. |
| 1.3.6.1.4.1.498.6.1.3.1.1 | RowgdcDsx1ConfigEntry | not-accessible | mandatory | The GDC DS1 Configuration table entry. The information in this entry augments the information for the corresponding entry in the dsx1ConfigEntry of the DS1 MIB… |
| 1.3.6.1.4.1.498.6.1.3.1.1.1 | ColumngdcDsx1ConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.1.3.1.1.2 | ColumngdcDsx1LineType | read-write | mandatory | This variable indicates the variety of DS-X Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reas… |
| 1.3.6.1.4.1.498.6.1.3.1.1.3 | ColumngdcDsx1InterfaceType | read-write | mandatory | The operating mode of the interface. Setting the value of this object to ds1(2) configures the interface as standard DS1. Setting the value of this object to d… |
| 1.3.6.1.4.1.498.6.1.3.1.1.4 | ColumngdcDsx1Preequalization | read-write | mandatory | Is the preequalization of the transmitter of the interface. The value other(1) identifies an other preequalization value which is defined elsewhere. This value… |
| 1.3.6.1.4.1.498.6.1.3.1.1.5 | ColumngdcDsx1AdminLineBuildout | read-write | mandatory | This variable is used to set the Transmit Ntwk Build-Out value on the network side and is only valid if the gdcDsx1InterfaceType is set for ds1(1). The values,… |
| 1.3.6.1.4.1.498.6.1.3.1.1.6 | ColumngdcDsx1OperLineBuildout | read-only | mandatory | This variable is used to report the current Ntwk build-out setting if the gdcDsx1InterfaceType is set for ds1(1). 'inProcess' indicates the unit is still deter… |
| 1.3.6.1.4.1.498.6.1.3.1.1.7 | ColumngdcDsx1AdminRcvRange | read-write | mandatory | This variable is used to set the receiver circuitry for signal recovery ranges when gdcDsx1InterfaceType is set for ds1 (1). This function is not supported for… |
| 1.3.6.1.4.1.498.6.1.3.1.1.8 | ColumngdcDsx1OperRcvRange | read-only | mandatory | This variable is used to report the current receiver range setting when gdcDsx1InterfaceType is set for ds1 (1). 'inProcess' indicates the unit is still determ… |
| 1.3.6.1.4.1.498.6.1.3.1.1.9 | ColumngdcDsx1OnesDensity | read-write | mandatory | The ones density restriction for the interface. The values of this object define the ones density restriction that is enforced on the interface. The value inhi… |
| 1.3.6.1.4.1.498.6.1.3.1.1.10 | ColumngdcDsx1TransmitClockSource | read-write | mandatory | Augments the dsx1TransmitClockSource of the DS1 MIB of RFC 1406. This object defines transmit clock sources that are not defined by RFC 1406, but are supported… |
| 1.3.6.1.4.1.498.6.1.3.1.1.11 | ColumngdcDsx1FallbackClockSource | read-write | mandatory | Identifies the fallback transmit clock source. The value of other(1) identifies another fallback transmit clock source that is defined elsewhere. The value of … |
| 1.3.6.1.4.1.498.6.1.3.1.1.14 | ColumngdcDsx1AISLoopdown | read-write | mandatory | The time in seconds when receiving a continuous AIS signal before a remotely initiated loopback is terminated. When this object has the value 4, then there is … |
| 1.3.6.1.4.1.498.6.1.3.1.1.15 | ColumngdcDsx1InbandLoopCfg | read-write | mandatory | This variable is used to set the In-Band DS1 Loopback Code Detection. 'inhibit' refers to when the in-band loopback codes are ignored. 'payload' designates a p… |
| 1.3.6.1.4.1.498.6.1.3.1.1.16 | ColumngdcDsx1Redundancy | read-write | mandatory | This variable identifies which unit is the Primary unit and which unit is the Secondary unit. When the value is onLine(1), then the unit is identified as the P… |
| 1.3.6.1.4.1.498.6.1.4 | NodegdcDsx1Diagnostics | |||
| 1.3.6.1.4.1.498.6.1.4.1 | TablegdcDsx1DiagTable | not-accessible | mandatory | The GDC DS1 Diagnostics table. Information in the entries of this table support diagnostics testing, both active testing via patterns, and passive testing via … |
| 1.3.6.1.4.1.498.6.1.4.1.1 | RowgdcDsx1DiagEntry | not-accessible | mandatory | The GDC DS1 Diagnostics table entry. The information in this entry augments the information for the corresponding entry in the DS1 Configuration table of the D… |
| 1.3.6.1.4.1.498.6.1.4.1.1.1 | ColumngdcDsx1DiagIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.1.4.1.1.2 | ColumngdcDsx1SendCode | read-write | mandatory | Augments the dsx1SendCode object from the DS1 MIB of RFC 1406. This object defines other codes that are not defined by dsx1SendCode. The value of other(1) can … |
| 1.3.6.1.4.1.498.6.1.4.1.1.4 | ColumngdcDsx1LoopbackConfig | read-write | mandatory | Augments the dsx1LoopbackConfig object from the DS1 MIB of RFC 1406. This object defines other loopback configurations that are not defined by dsx1LoopbackConf… |
| 1.3.6.1.4.1.498.6.1.4.1.1.5 | ColumngdcDsx1DS0Diag | read-write | mandatory | Defines a DS0 level diagnostic. Setting this object value to 0 disables a DS0 level diagnostic. Setting this object to a value from 1 to 32 enables a DS0 level… |
| 1.3.6.1.4.1.498.6.1.4.1.1.6 | ColumngdcDsx1TestDuration | read-write | mandatory | Selects the duration to run a diagnostic test. The value(1) noLimit signifies that the test should run indefinitely until explicitly terminated. Default value:… |
| 1.3.6.1.4.1.498.6.1.4.1.1.8 | ColumngdcDsx1TestExecutionStatus | read-only | mandatory | This variable reports the status of a test. notInTest(1) indicates a test is not running. testInProgress(2) indicates that a test is currently running. testCom… |
| 1.3.6.1.4.1.498.6.1.4.1.1.9 | ColumngdcDsx1TestExceptions | read-only | mandatory | Indicates exceptions that have occurred that may affect interpretation of the test results. The value of this object is a sum. This sum initially take the valu… |
| 1.3.6.1.4.1.498.6.1.4.1.1.10 | ColumngdcDsx1TestResults | read-only | mandatory | The results of the last diagnostic test. This can be the current test running or the last completed test. Note that the interpretation of these results may be … |
| 1.3.6.1.4.1.498.6.1.5 | NodegdcDsx1Performance | |||
| 1.3.6.1.4.1.498.6.1.5.1 | TablegdcDsx1ANSIperfTable | not-accessible | mandatory | The GDC ANSI Performance table. Information in the entries of this table support the ANSI Scheduled Performance Reports. Entries supply information for both in… |
| 1.3.6.1.4.1.498.6.1.5.1.1 | RowgdcDsx1ANSIperfEntry | not-accessible | mandatory | The GDC ANSI Performance table entry. The information in this entry presents one of the 4 second periods performance data in either the inbound or outbound dir… |
| 1.3.6.1.4.1.498.6.1.5.1.1.1 | ColumngdcDsx1ANSIperfIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.1.5.1.1.2 | ColumngdcDsx1ANSIdirection | read-only | mandatory | Identifies the direction of the report entry. This is either an outbound(1) report or an inbound(2) report. |
| 1.3.6.1.4.1.498.6.1.5.1.1.3 | ColumngdcDsx1ANSIseconds | read-only | mandatory | Identifies the reporting interval. This has the value 1 to 4 supporting up to the last 4 seconds of performance data. |
| 1.3.6.1.4.1.498.6.1.5.1.1.4 | ColumngdcDsx1ANSICRCerrorEvents | read-only | mandatory | Identifies the magnitude of the error events in the interval which this entry represents. |
| 1.3.6.1.4.1.498.6.1.5.1.1.5 | ColumngdcDsx1ANSIsevereErrors | read-only | mandatory | Identifies whether or not any severe errors were detected in the interval which this entry represents. |
| 1.3.6.1.4.1.498.6.1.5.1.1.6 | ColumngdcDsx1ANSIframeErrors | read-only | mandatory | Identifies whether or not any framing errors were detected in the interval which this entry represents. |
| 1.3.6.1.4.1.498.6.1.5.1.1.7 | ColumngdcDsx1ANSIcodeViolations | read-only | mandatory | Identifies whether or not any code violations were detected in the interval which this entry represents. |
| 1.3.6.1.4.1.498.6.1.5.1.1.8 | ColumngdcDsx1ANSIcontrolledSlips | read-only | mandatory | Identifies whether or not any controlled slips were detected in the interval which this entry represents. |
| 1.3.6.1.4.1.498.6.1.5.1.1.9 | ColumngdcDsx1ANSIactivePayloadLoops | read-only | mandatory | Identifies whether or not any active payload loops were detected in the interval which this entry represents. |
| 1.3.6.1.4.1.498.6.1.5.2 | TablegdcDsx1CurrentTable | not-accessible | mandatory | The gdcDsx1 Current table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.1.5.2.1 | RowgdcDsx1CurrentEntry | not-accessible | mandatory | An entry in the gdcDsx1 Current table. |
| 1.3.6.1.4.1.498.6.1.5.2.1.1 | ColumngdcDsx1CurrentIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.1.5.2.1.2 | ColumngdcDsx1CurrentLOFCs | read-only | mandatory | The number of Loss of Frame Counts (LOFCs) encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.498.6.1.5.2.1.3 | ColumngdcDsx1CurrenUserStat | read-only | mandatory | Returns a bitwise snapshot of the statistics. Octet 1 bit 7 - parity bit 6 - 2^15 Errored Seconds bit 5 - 2^14 bit 4 - 2^15 Severely Errored Seconds bit 3 - 2^… |
| 1.3.6.1.4.1.498.6.1.5.3 | TablegdcDsx1IntervalTable | not-accessible | mandatory | The gdcDsx1 Interval table. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.1.5.3.1 | RowgdcDsx1IntervalEntry | not-accessible | mandatory | An entry in the DS1 Interval table. |
| 1.3.6.1.4.1.498.6.1.5.3.1.1 | ColumngdcDsx1IntervalIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.1.5.3.1.2 | ColumngdcDsx1IntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.498.6.1.5.3.1.3 | ColumngdcDsx1IntervalLOFCs | read-only | mandatory | The number of Loss of Frame Counts (LOFCs) encountered by a DS1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.498.6.1.5.4 | TablegdcDsx1TotalTable | not-accessible | mandatory | The DS1 Total table. 24 hour interval. This table supplements the entries in the DS1 AT&T performance table of the DS1 MIB defined in RFC1406. |
| 1.3.6.1.4.1.498.6.1.5.4.1 | RowgdcDsx1TotalEntry | not-accessible | mandatory | An entry in the DS1 Total table. |
| 1.3.6.1.4.1.498.6.1.5.4.1.1 | ColumngdcDsx1TotalIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.1.5.4.1.2 | ColumngdcDsx1TotalLOFCs | read-only | mandatory | The number of Loss of Frame Counts (LOFCs) encountered by a DS1interface in the current 15 minute interval. |
| 1.3.6.1.4.1.498.6.1.6 | NodegdcDsx1Alarms | |||
| 1.3.6.1.4.1.498.6.1.6.1 | TablegdcDsx1AlarmConfigTable | not-accessible | mandatory | The gdcAlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a unit and… |
| 1.3.6.1.4.1.498.6.1.6.1.1 | RowgdcDsx1AlarmConfigEntry | not-accessible | mandatory | An entry in the GDC Alarm Configuration table. |
| 1.3.6.1.4.1.498.6.1.6.1.1.1 | ColumngdcDsx1AlarmConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.6.1.6.1.1.2 | ColumngdcDsx1AlarmConfigIdentifier | read-only | mandatory | The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) do… |
| 1.3.6.1.4.1.498.6.1.6.1.1.3 | ColumngdcDsx1AlarmCountWindow | read-write | mandatory | This variable sets/reads the BPV alarm window. This window is used with the alarm threshold to determine how long the alarm should be active before reporting. … |
| 1.3.6.1.4.1.498.6.1.6.1.1.4 | ColumngdcDsx1AlarmCountThreshold | read-write | mandatory | This function sets/reads the BPV alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a giv… |
| 1.3.6.1.4.1.498.6.1.6.2 | TablegdcDsx1AlarmStatusTable | not-accessible | mandatory | The gdcDsx1AlarmStatusTable contains entries that report the status of alarms. The status of an alarm consists of the current alarm status, indicating whether … |
| 1.3.6.1.4.1.498.6.1.6.2.1 | RowgdcDsx1AlarmStatusEntry | not-accessible | mandatory | An entry in the GDC Alarm Status table. |
| 1.3.6.1.4.1.498.6.1.6.2.1.1 | ColumngdcDsx1AlarmStatusIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.6.1.6.2.1.2 | ColumngdcDsx1AlarmStatusIdentifier | read-only | mandatory | The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) do… |
| 1.3.6.1.4.1.498.6.1.6.2.1.3 | ColumngdcDsx1AlarmCount | read-only | mandatory | The number of occurrences of this alarm. This objects value is incremented once for each time that the alarm occurs. This count is incremented regardless of wh… |
| 1.3.6.1.4.1.498.6.1.6.2.1.4 | ColumngdcDsx1AlarmFirstOccurrence | read-only | mandatory | The time at which the alarm first occurred. This is reported as the number of TimeTicks after the interface was initialized. This object along with its compani… |
| 1.3.6.1.4.1.498.6.1.6.2.1.5 | ColumngdcDsx1AlarmLastOccurrence | read-only | mandatory | The time at which the alarm last occurred. This is reported as the number of TimeTicks after the interface was initialized. This object along with its companio… |
| 1.3.6.1.4.1.498.6.1.7 | NodegdcDsx1NetMaintenance | |||
| 1.3.6.1.4.1.498.6.1.7.1 | TablegdcDsx1NetMaintTable | not-accessible | mandatory | The table describes the maintenance objects for the network and references the network interface (cc = 01). |
| 1.3.6.1.4.1.498.6.1.7.1.1 | RowgdcDsx1NetMaintEntry | not-accessible | mandatory | An entry in the GDC ltu Network Maintenance Configuration Table. |
| 1.3.6.1.4.1.498.6.1.7.1.1.1 | ColumngdcDsx1NetMaintLineIndex | read-only | mandatory | This object identifies Maintenance parameters associated with the managed object. |
| 1.3.6.1.4.1.498.6.1.7.1.1.2 | ColumngdcDsx1NetMaintReceiveLevel | read-only | mandatory | This variable reports the absolute value of the network relative receive level of -40dB to +3dB when the gdcDsx1InterfaceType is set for ds1(1). This object in… |
| 1.3.6.1.4.1.498.6.1.7.1.1.3 | ColumngdcDsx1NetMaintAttenSense | read-only | mandatory | This variable identifies ths sense of the gdcdsx1NetReceiveLevel variable. |
| 1.3.6.1.4.1.498.6.2 | Nodesc5001 | |||
| 1.3.6.1.4.1.498.6.2.1 | Nodedsx1AlarmData | |||
| 1.3.6.1.4.1.498.6.2.1.1 | Nodedsx1NoResponseAlm | |||
| 1.3.6.1.4.1.498.6.2.1.2 | Nodedsx1DiagRxErrAlm | |||
| 1.3.6.1.4.1.498.6.2.1.3 | Nodedsx1PowerUpAlm | |||
| 1.3.6.1.4.1.498.6.2.1.4 | Nodedsx1NvRamCorrupt | |||
| 1.3.6.1.4.1.498.6.2.1.5 | Nodedsx1UnitFailure | |||
| 1.3.6.1.4.1.498.6.2.1.6 | Nodedsx1MbiLock | |||
| 1.3.6.1.4.1.498.6.2.1.7 | Nodedsx1LocalPwrFail | |||
| 1.3.6.1.4.1.498.6.2.1.8 | Nodedsx1TimingLoss | |||
| 1.3.6.1.4.1.498.6.2.1.9 | Nodedsx1StatusChange | |||
| 1.3.6.1.4.1.498.6.2.1.10 | Nodedsx1UnsoTest | |||
| 1.3.6.1.4.1.498.6.2.1.11 | Nodedsx1LossOfSignal | |||
| 1.3.6.1.4.1.498.6.2.1.12 | Nodedsx1LossOfFrame | |||
| 1.3.6.1.4.1.498.6.2.1.13 | Nodedsx1Ais | |||
| 1.3.6.1.4.1.498.6.2.1.14 | Nodedsx1ReceivedYellow | |||
| 1.3.6.1.4.1.498.6.2.1.15 | Nodedsx1UnavailSignalState | |||
| 1.3.6.1.4.1.498.6.2.1.16 | Nodedsx1ExcessiveZeros | |||
| 1.3.6.1.4.1.498.6.2.1.17 | Nodedsx1LowAverageDensity | |||
| 1.3.6.1.4.1.498.6.2.1.18 | Nodedsx1ControlledSlips | |||
| 1.3.6.1.4.1.498.6.2.1.19 | Nodedsx1BipolarViolations | |||
| 1.3.6.1.4.1.498.6.2.1.20 | Nodedsx1CrcErrors | |||
| 1.3.6.1.4.1.498.6.2.1.21 | Nodedsx1FallbackTimingActive |