GDCSC5K-MIB
36 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.3 | Nodesc | |||
| 1.3.6.1.4.1.498.3.2 | Nodesc5000 | |||
| 1.3.6.1.4.1.498.3.2.1 | NodegdcSc5000Version | |||
| 1.3.6.1.4.1.498.3.2.1.1 | ScalargdcSc5000MIBVersion | read-only | mandatory | The version number of the MIB, to allow products to know which MIB is being supported. The version number will be x.yzT where x is a major revision (1-9), y is… |
| 1.3.6.1.4.1.498.3.2.2 | NodegdcSc5000Timing | |||
| 1.3.6.1.4.1.498.3.2.2.1 | TablegdcSc5000TimingTable | not-accessible | obsolete | A table that contains information about the source of shelf timing in the system. |
| 1.3.6.1.4.1.498.3.2.2.1.1 | RowgdcSc5000TimingEntry | not-accessible | obsolete | A list of information for each node in the system. |
| 1.3.6.1.4.1.498.3.2.2.1.1.1 | ColumngdcSc5000TimingIndex | read-only | obsolete | The value indicates the node number for which this entry contains management information. The gdcSc5000TimingIndex is based off of the IFindex in MIB-II. The g… |
| 1.3.6.1.4.1.498.3.2.2.1.1.2 | ColumngdcSc5000SrcShelfTiming | read-write | obsolete | Identifies which unit or units are the source of shelf timing defined as follows: If one unit is defined as fourMegClk(2) then only one other unit may be defin… |
| 1.3.6.1.4.1.498.3.2.3 | NodegdcSc5000Shelf | |||
| 1.3.6.1.4.1.498.3.2.3.1 | Scalarsc5000ShelfNodeTypes | read-only | mandatory | Each octet contains the Node Type of the card occupying the slot. Values are as follows: empty 0 vf288 1 sc5001 2 sc5520 3 datx2011 4 sc700G2 6 sc700G3 7 sc616… |
| 1.3.6.1.4.1.498.3.2.3.2 | Scalarsc5000ShelfAdminStatus | read-write | mandatory | Each octet xx contains the Admin Statuses of the Network Elements(NEs) occupying slot xx. Each octet is bitmapped as follows: bit 7:\ bit 6: Admin Status of NE… |
| 1.3.6.1.4.1.498.3.2.3.3 | Scalarsc5000ShelfOperStatus | read-only | mandatory | Each octet xx contains the Operational Statuses of the Network Elements(NEs) occupying slot xx. Each octet is bitmapped as follows: bit 7:\ bit 6: Oper Status … |
| 1.3.6.1.4.1.498.3.2.3.4 | Scalarsc5000ShelfClockProvider | read-write | obsolete | Octet 1 contains the slot number of the card providing the 4MHz clock. Octet 2 contains the line number of the card providing the 4MHz clock. Octet 3 contains … |
| 1.3.6.1.4.1.498.3.2.3.5 | Scalarsc5000ShelfLTUHwayAssgn | read-write | mandatory | Octet 1 contains the slot number of the LTU responsible for Highway 1. Octet 2 contains the slot number of the LTU responsible for Highway 2. Octet 3 contains … |
| 1.3.6.1.4.1.498.3.2.3.6 | Scalarsc5000ShelfClockMode | read-only | mandatory | Indicates which LTU is supplying the clocks, LTU designated as the primary or fallback. none(3) will only occur when the SCM determines that neither of the car… |
| 1.3.6.1.4.1.498.3.2.3.7 | Scalarsc5000ShelfClocks | read-write | mandatory | Octet 1 contains the slot number of the primary LTU responsible for providing the shelf clock. Octet 2 contains the line number of the primary LTU responsible … |
| 1.3.6.1.4.1.498.3.2.3.8 | Scalarsc5000ShelfAutoClockRevert | read-write | mandatory | enable(1) indicates that the SCM will allow the primary LTU to resume providing the system timing. |
| 1.3.6.1.4.1.498.3.2.3.9 | Scalarsc5000ShelfRevertToPrimaryClk | read-write | mandatory | execute(2) forces the primary LTU to resume providing the system timing. |
| 1.3.6.1.4.1.498.3.2.4 | NodegdcSc5000Highways | |||
| 1.3.6.1.4.1.498.3.2.4.1 | Tablesc5000HighwayTable | not-accessible | mandatory | A table that contains information about Highway and Time Slot allocation. |
| 1.3.6.1.4.1.498.3.2.4.1.1 | Rowsc5000HighwayEntry | not-accessible | mandatory | A list of information for each highway. |
| 1.3.6.1.4.1.498.3.2.4.1.1.1 | Columnsc5000HighwayNumber | read-only | mandatory | The value indicates the highway to be configured. |
| 1.3.6.1.4.1.498.3.2.4.1.1.2 | Columnsc5000HighwayAllocation | read-write | mandatory | There are 3 Octets per Time Slot. Octets 1,2,3 are representative of Time Slot 1, Octets 4,5,6 are representative of Time Slot 2, etc. In each grouping, the fi… |
| 1.3.6.1.4.1.498.3.2.5 | NodegdcSc5000LTUConfig | |||
| 1.3.6.1.4.1.498.3.2.5.1 | Tablesc5000LTUConfigTable | not-accessible | mandatory | A table that contains information about the configuration of the LTUs in the shelf. |
| 1.3.6.1.4.1.498.3.2.5.1.1 | Rowsc5000LTUConfigEntry | not-accessible | mandatory | A list of information for each LTU in the shelf. |
| 1.3.6.1.4.1.498.3.2.5.1.1.1 | Columnsc5000SlotNumber | read-only | mandatory | The value indicates shelf slot containing the LTU. |
| 1.3.6.1.4.1.498.3.2.5.1.1.2 | Columnsc5000DS0Assign | read-write | mandatory | One Octet per DS0. Values are as follows: 1 = Highway 2 = Cascade 3 = Busy Out 4 = Not Present |
| 1.3.6.1.4.1.498.3.2.5.1.1.3 | Columnsc5000ConfigCSUMode | read-write | mandatory | 'csuMode' indicates the unit is operating as a T1 channel service unit with the payload from the network interface connected to the payload of the cascade inte… |
| 1.3.6.1.4.1.498.3.2.6 | NodegdcSc5000Circuit | |||
| 1.3.6.1.4.1.498.3.2.6.1 | Tablesc5000CircuitTable | not-accessible | mandatory | A table that contains information about sc5000 circuits. |
| 1.3.6.1.4.1.498.3.2.6.1.1 | Rowsc5000CircuitEntry | not-accessible | mandatory | A list of information for each node in the system. |
| 1.3.6.1.4.1.498.3.2.6.1.1.1 | Columnsc5000CircuitIndex | read-only | mandatory | Integer value which uniquely identifies the node to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical shel… |
| 1.3.6.1.4.1.498.3.2.6.1.1.2 | Columnsc5000CircuitType | read-only | mandatory | This object defines the circuit type. |