GDCSC611-MIB
89 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.12 | Nodebql2 | |||
| 1.3.6.1.4.1.498.12.2 | Nodebql611 | |||
| 1.3.6.1.4.1.498.12.2.1 | Scalarbql611MIBVersion | read-only | mandatory | The version number of the MIB, to allow products to know which MIB is being supported. The version number will be x.yzT where x is a major revision (1-9), y is… |
| 1.3.6.1.4.1.498.12.2.2 | Tablebql611WhatAreYouTable | not-accessible | mandatory | The GDC SC611 and DC621 What Are You Table. |
| 1.3.6.1.4.1.498.12.2.2.1 | Rowbql611WhatAreYouEntry | not-accessible | mandatory | An entry in the GDC SC611 What Are You table. |
| 1.3.6.1.4.1.498.12.2.2.1.1 | Columnbql611WhatAreYouIndex | read-only | mandatory | This object is the identifier of the SC611/DC621 What Are You table. |
| 1.3.6.1.4.1.498.12.2.2.1.2 | Columnbql611BaseCardType | read-only | mandatory | This function returns the value the Base Card Type. |
| 1.3.6.1.4.1.498.12.2.2.1.3 | Columnbql611OptionCard | read-only | mandatory | This indicates whether the option card is installed or not on the DC621. |
| 1.3.6.1.4.1.498.12.2.2.1.4 | Columnbql611DTECardType | read-only | mandatory | This object is the DTE plug-in card type. This variable is used for a SC611 or DC621. |
| 1.3.6.1.4.1.498.12.2.2.1.5 | Columnbql611CodeRev | read-only | mandatory | This function returns the firmware code level. Example A- ,B- |
| 1.3.6.1.4.1.498.12.2.2.1.6 | Columnbql611AlarmStatus | read-only | mandatory | The current alarms of the unit without the alarm masks. |
| 1.3.6.1.4.1.498.12.2.3 | Tablebql611ConfigTable | not-accessible | mandatory | The GDC SC611, DC621 2B1Q configuration table. |
| 1.3.6.1.4.1.498.12.2.3.1 | Rowbql611ConfigEntry | not-accessible | mandatory | A listing of GDC 2B1Q SC611/DC621 options. |
| 1.3.6.1.4.1.498.12.2.3.1.1 | Columnbql611ConfigIndex | read-only | mandatory | A unique index for the Configuration Table. |
| 1.3.6.1.4.1.498.12.2.3.1.2 | Columnbql611DteRate | read-write | mandatory | Object to select the DTE rate for the SC611 or DC621. |
| 1.3.6.1.4.1.498.12.2.3.1.3 | Columnbql611RateAdaption | read-write | mandatory | Object to select the DTE Rate Adaption for the SC611 or DC621. |
| 1.3.6.1.4.1.498.12.2.3.1.4 | Columnbql611DteOperation | read-write | mandatory | Object to select the DTE Operation for the SC611 or DC621. |
| 1.3.6.1.4.1.498.12.2.3.1.5 | Columnbql611TxClkSource | read-write | mandatory | Object to select the Transmit Clock Source for the SC611 ONLY. |
| 1.3.6.1.4.1.498.12.2.3.1.6 | Columnbql611WordLength | read-write | mandatory | Object to select the Word Length for the SC611 or DC621 when selected for async mode. |
| 1.3.6.1.4.1.498.12.2.3.1.7 | Columnbql611OverSpeed | read-write | mandatory | Object to select the Over Speed for the SC611 or DC621. |
| 1.3.6.1.4.1.498.12.2.3.1.8 | Columnbql611RTS | read-write | mandatory | Object to select RTS for SC611 and DC621 only. |
| 1.3.6.1.4.1.498.12.2.3.1.9 | Columnbql611RTSCTSDelay | read-write | mandatory | Object to select RTS CTS Delay for SC611 and DC621. |
| 1.3.6.1.4.1.498.12.2.3.1.10 | Columnbql611DCD | read-write | mandatory | Object to select DCD for SC611 and DC621. |
| 1.3.6.1.4.1.498.12.2.3.1.11 | Columnbql611RDL | read-write | mandatory | Object to select the RDL respond for SC611 and DC621. |
| 1.3.6.1.4.1.498.12.2.3.1.12 | Columnbql611RDLMethod | read-write | mandatory | Object to select RDL Method for SC611 and DC621. SC611 Valid Choices DC621 Valid Choices =================== =================== V54 V54 EOC PN127 |
| 1.3.6.1.4.1.498.12.2.3.1.13 | Columnbql611RDLTimeout | read-write | mandatory | Object to select RDL Timeout for SC611 or DC621. |
| 1.3.6.1.4.1.498.12.2.3.1.14 | Columnbql611TestPattern | read-write | mandatory | Object to Test Pattern for SC611 and DC621. |
| 1.3.6.1.4.1.498.12.2.4 | Tablebql611DiagnosticTable | not-accessible | mandatory | The GDC SC611/DC621 diagnostics table. |
| 1.3.6.1.4.1.498.12.2.4.1 | Rowbql611DiagnosticEntry | not-accessible | mandatory | A listing of GDC SC611/DC621 diagnostic tests |
| 1.3.6.1.4.1.498.12.2.4.1.1 | Columnbql611DiagnosticIndex | read-only | mandatory | A unique index for the Diagnostic Table. |
| 1.3.6.1.4.1.498.12.2.4.1.2 | Columnbql611DiagnosticTest | read-write | mandatory | This function selects or reads the test. 0 = no test currently operating 1 = remote loopback test 2 = channel loopback test 4 = data loopback test 8 = selftest… |
| 1.3.6.1.4.1.498.12.2.4.1.3 | Columnbql611DiagnosticActive | read-only | mandatory | This function represents the test condition. |
| 1.3.6.1.4.1.498.12.2.4.1.4 | Columnbql611DiagnosticResults | read-only | mandatory | This function reads the self test results in bit errors. |
| 1.3.6.1.4.1.498.12.2.4.1.5 | Columnbql611DiagnosticResetErrorCount | read-write | mandatory | Object to reset selftest error count during diagnostic self testing for SC611 and DC621. |
| 1.3.6.1.4.1.498.12.2.5 | Tablebql611ControlTable | not-accessible | mandatory | The GDC SC611 and DC621 Control Table. |
| 1.3.6.1.4.1.498.12.2.5.1 | Rowbql611ControlEntry | not-accessible | mandatory | An entry in the GDC SC611/DC621 Control table. |
| 1.3.6.1.4.1.498.12.2.5.1.1 | Columnbql611ControlIndex | read-only | mandatory | This object is the identifier of the SC611/DC621 Control table. |
| 1.3.6.1.4.1.498.12.2.5.1.2 | Columnbql611SoftReset | read-write | mandatory | Forces a soft reset on the network element. The reset selection is write only. The normal selection is read only. |
| 1.3.6.1.4.1.498.12.2.5.1.3 | Columnbql611EraseConfig | read-write | mandatory | Forces an erase of the stored configuration in the network element. The erase selection is write only. The normal selection is read only. |
| 1.3.6.1.4.1.498.12.2.5.1.4 | Columnbql611FrontPanel | read-write | mandatory | Object used to enable or disable the units front panel switches. |
| 1.3.6.1.4.1.498.12.2.5.1.5 | Columnbql611LEDStatus | read-only | mandatory | The GDC SC611 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - not used 1.5 - not used 1.4 - test mode 1.3 - alarm … |
| 1.3.6.1.4.1.498.12.2.5.1.6 | Columnbql621LEDStatus | read-only | mandatory | The GDC DC621 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - sync 1.4 - request to send 1.3 - cle… |
| 1.3.6.1.4.1.498.12.2.6 | Tablebql611CurrentTable | not-accessible | mandatory | The SC611/DC621 Current table. |
| 1.3.6.1.4.1.498.12.2.6.1 | Rowbql611CurrentEntry | not-accessible | mandatory | An entry in the SC611/DC621 Current table. |
| 1.3.6.1.4.1.498.12.2.6.1.1 | Columnbql611CurrentIndex | read-only | mandatory | The index value which uniquely identifies the SC611 interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.12.2.6.1.2 | Columnbql611CurrentStats | read-only | mandatory | The number of Errored Seconds, Severely Errored Seconds & Unavailable Errored Seconds encountered by an ISDN interface in the current 15 minute interval. |
| 1.3.6.1.4.1.498.12.2.8 | Tablebql611IntervalTable | not-accessible | mandatory | The SC611/DC621 Interval table. |
| 1.3.6.1.4.1.498.12.2.8.1 | Rowbql611IntervalEntry | not-accessible | mandatory | An entry in the SC611/DC621 Interval table. |
| 1.3.6.1.4.1.498.12.2.8.1.1 | Columnbql611IntervalIndex | read-only | mandatory | The index value which uniquely identifies the ISDN interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.12.2.8.1.2 | Columnbql611IntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minute inter- val (assuming that… |
| 1.3.6.1.4.1.498.12.2.8.1.3 | Columnbql611IntervalStats | read-only | mandatory | The number of Errored Seconds, Severely Errored Seconds and Unavailable Errored Seconds encountered by a DS1 interface in one of the previous 96, individual 15… |
| 1.3.6.1.4.1.498.12.2.9 | Tablebql611TotalTable | not-accessible | mandatory | The SC611/DC621 Total table. 24 hour interval. |
| 1.3.6.1.4.1.498.12.2.9.1 | Rowbql611TotalEntry | not-accessible | mandatory | An entry in the SC611/DC621 Total table. |
| 1.3.6.1.4.1.498.12.2.9.1.1 | Columnbql611TotalIndex | read-only | mandatory | The index value which uniquely identifies the ISDN interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.12.2.9.1.2 | Columnbql611TotalStats | read-only | mandatory | The number of Errored Seconds,Severely Errored Seconds & Unavailable Errored Seconds encountered by an ISDN interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.498.12.2.10 | Tablebql611IntervalMaintenanceTable | not-accessible | mandatory | The SC611, DC621 Loop Interval Maintenance table. |
| 1.3.6.1.4.1.498.12.2.10.1 | Rowbql611IntervalMaintenanceEntry | not-accessible | mandatory | The SC611, DC621 Interval Maintenance table entry. |
| 1.3.6.1.4.1.498.12.2.10.1.1 | Columnbql611IntervalMaintenanceIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.12.2.10.1.2 | Columnbql611ResetIntervals | read-write | mandatory | This variable is used to reset Loop performance intervals. When it is set to reset, the Loop performance tables are reset to zero. |
| 1.3.6.1.4.1.498.12.2.10.1.3 | Columnbql611NumberofValidIntervals | read-only | mandatory | This variable is used to read the number of intervals collected. Each interval is an increment of 15 minutes. |
| 1.3.6.1.4.1.498.12.2.10.1.4 | Columnbql611ResetMajorAlarm | read-write | mandatory | This variable is used to reset alarm per Loop basis. |
| 1.3.6.1.4.1.498.12.2.10.1.5 | Columnbql611ResetMinorAlarm | read-write | mandatory | This variable is used to reset alarm per Loop basis. |
| 1.3.6.1.4.1.498.12.3 | Nodebql621 | |||
| 1.3.6.1.4.1.498.12.9 | Nodebql611Alarm | |||
| 1.3.6.1.4.1.498.12.9.1 | Nodebql611AlarmData | |||
| 1.3.6.1.4.1.498.12.9.1.1 | Nodebql611NoResponseAlm | |||
| 1.3.6.1.4.1.498.12.9.1.2 | Nodebql611DiagRxErrAlm | |||
| 1.3.6.1.4.1.498.12.9.1.3 | Nodebql611PowerUpAlm | |||
| 1.3.6.1.4.1.498.12.9.1.4 | Nodebql611OutofSyncAlm | |||
| 1.3.6.1.4.1.498.12.9.1.5 | Nodebql611TxClkOutOfToleranceAlm | |||
| 1.3.6.1.4.1.498.12.9.1.6 | Nodebql611ExtClkAbsentAlm | |||
| 1.3.6.1.4.1.498.12.9.1.7 | Nodebql611SealingCurrentNoContinuityAlm | |||
| 1.3.6.1.4.1.498.12.9.1.8 | Nodebql611DtrNotPresentAlm | |||
| 1.3.6.1.4.1.498.12.9.1.9 | Nodebql611MajorAlarmBERAlm | |||
| 1.3.6.1.4.1.498.12.9.1.10 | Nodebql611MinorAlarmBERAlm | |||
| 1.3.6.1.4.1.498.12.9.2 | Tablebql611AlarmConfigTable | not-accessible | mandatory | The bql611AlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a unit … |
| 1.3.6.1.4.1.498.12.9.2.1 | Rowbql611AlarmConfigEntry | not-accessible | mandatory | An entry in the bql611AlarmConfigTable table. |
| 1.3.6.1.4.1.498.12.9.2.1.1 | Columnbql611AlarmConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.12.9.2.1.2 | Columnbql611AlarmConfigIdentifier | read-only | mandatory | The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) do… |
| 1.3.6.1.4.1.498.12.9.2.1.3 | Columnbql611AlarmThreshold | read-write | mandatory | This function sets/reads the Major or Minor BER alarm threshold criteria for a SC611 or DC621. |
| 1.3.6.1.4.1.498.12.11 | Nodebql621Alarm | |||
| 1.3.6.1.4.1.498.12.11.1 | Nodebql621AlarmData | |||
| 1.3.6.1.4.1.498.12.11.1.1 | Nodebql621NoResponseAlm | |||
| 1.3.6.1.4.1.498.12.11.1.2 | Nodebql621DiagRxErrAlm | |||
| 1.3.6.1.4.1.498.12.11.1.3 | Nodebql621PowerUpAlm | |||
| 1.3.6.1.4.1.498.12.11.1.4 | Nodebql621DtrNotPresentAlm | |||
| 1.3.6.1.4.1.498.12.11.1.5 | Nodebql621MajorAlarmBERAlm | |||
| 1.3.6.1.4.1.498.12.11.1.6 | Nodebql621MinorAlarmBERAlm |