GDCUAS7626-MIB
91 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.12 | Nodebql2 | |||
| 1.3.6.1.4.1.498.12.12 | Nodeuas7626 | |||
| 1.3.6.1.4.1.498.12.12.1 | Nodeuas7626Version | |||
| 1.3.6.1.4.1.498.12.12.1.1 | Scalaruas7626MIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |
| 1.3.6.1.4.1.498.12.12.1.2 | Tableuas7626VersionTable | not-accessible | mandatory | The 7626 version table |
| 1.3.6.1.4.1.498.12.12.1.2.1 | Rowuas7626VersionEntry | not-accessible | mandatory | An entry in the GDC uas7626System Version Table. |
| 1.3.6.1.4.1.498.12.12.1.2.1.1 | Columnuas7626VersionIndex | read-only | mandatory | Integer value which uniquely identifies the UAS7626 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.12.12.1.2.1.2 | Columnuas7626ActiveFirmwareRev | read-only | mandatory | The version number of the firmware currently executing. The format is MM.NN.BB where: MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix Revision … |
| 1.3.6.1.4.1.498.12.12.1.2.1.3 | Columnuas7626StoredFirmwareRev | read-only | mandatory | The version number of the firmware stored (in a compressed format) but not currently executing. MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix… |
| 1.3.6.1.4.1.498.12.12.1.2.1.4 | Columnuas7626StoredFirmwareStatus | read-only | mandatory | This object represents the state of the Non-Active or Stored firmware: statBlank(1) Factory Default statDownLoading(2) In process of downloading firmware statO… |
| 1.3.6.1.4.1.498.12.12.1.2.1.5 | Columnuas7626SwitchActiveFirmware | read-write | mandatory | This object is used to switch the active executing firmware from the version in uas7626ActiveFirmwareRev to the version in uas7626StoredFirmwareRev. When a swi… |
| 1.3.6.1.4.1.498.12.12.1.2.1.6 | Columnuas7626DownloadingMode | read-write | mandatory | This object is used to configure the download mode: disableAll(1) Prevents any firmware downloading to UAS7626 enableAndWait(2) Allows downloading zipped code … |
| 1.3.6.1.4.1.498.12.12.2 | Nodeuas7626Maintenance | |||
| 1.3.6.1.4.1.498.12.12.2.1 | Tableuas7626MaintenanceTable | not-accessible | mandatory | The table describes the maintenance objects for uas7626. |
| 1.3.6.1.4.1.498.12.12.2.1.1 | Rowuas7626MaintenanceEntry | not-accessible | mandatory | An entry in the GDC 7626 Maintenance Table. |
| 1.3.6.1.4.1.498.12.12.2.1.1.1 | Columnuas7626MaintenanceLineIndex | read-only | mandatory | Integer value which uniquely identifies the UAS7626 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.12.12.2.1.1.2 | Columnuas7626SoftReset | read-write | mandatory | Supports the action of soft resetting the unit. When this object is set to reset(2), then the unit performs a soft reset, whose meaning is specific to the type… |
| 1.3.6.1.4.1.498.12.12.2.1.1.3 | Columnuas7626DefaultInit | read-write | mandatory | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault(2) the unit will perform a r… |
| 1.3.6.1.4.1.498.12.12.2.1.1.4 | Columnuas7626ResetMajorAlarm | read-write | mandatory | This variable is used to reset the Major BER alarm. A value of norm(1) cannot be set by management and will always be returned on a read. Valid [i]nterface = 0… |
| 1.3.6.1.4.1.498.12.12.2.1.1.5 | Columnuas7626ResetMinorAlarm | read-write | mandatory | This variable is used to reset the Minor BER alarm. A value of norm(1) cannot be set by management and will always be returned on a read. Valid [i]nterface = 0… |
| 1.3.6.1.4.1.498.12.12.2.1.1.6 | Columnuas7626ResetStatistics | read-write | mandatory | This variable is used to reset the performance intervals. When it is set to reset, the performance tables and uas7626Valid intervals are reset to zero. The val… |
| 1.3.6.1.4.1.498.12.12.2.1.1.7 | Columnuas7626ValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected. The value will be 16 unless the interface was brought on-line within the last 4 hours, in … |
| 1.3.6.1.4.1.498.12.12.2.1.1.8 | Columnuas7626SysUpTime | read-only | mandatory | This variable is used to report the elapsed system tick time for conversion to real time at the controller and is not related to the sysUpTime referenced in MI… |
| 1.3.6.1.4.1.498.12.12.2.1.1.9 | Columnuas7626LedStatus | read-only | mandatory | Returns a bitwise snapshot of the front panel LED state: key 001 = SOLID GREEN 010 = SOLID RED 011 = FLASHING RED 100 = FLASHING GREEN 1.7 - n/a 1.6 - \ 1.5 - … |
| 1.3.6.1.4.1.498.12.12.2.1.1.10 | Columnuas7626AlarmStatus | read-only | mandatory | Returns actual bit-wise Status of alarms regardless of whether the alarm is masked or not. key 0 = Inactive 1 = Active 1.7 - f/u 1.6 - Power-up 1.5 - f/u 1.4 -… |
| 1.3.6.1.4.1.498.12.12.2.1.1.11 | Columnuas7626StatLastInitialized | read-only | mandatory | The elapsed time since the statistics were last initialized. This will be zero'd when uas7626ResetStatistics is reset(2). Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.2.1.1.12 | Columnuas7626CircuitID | read-write | mandatory | Name to identify the circuit. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.3 | Nodeuas7626Configuration | |||
| 1.3.6.1.4.1.498.12.12.3.1 | Tableuas7626ConfigTable | not-accessible | mandatory | The GDC Configuration table. |
| 1.3.6.1.4.1.498.12.12.3.1.1 | Rowuas7626ConfigEntry | not-accessible | mandatory | The GDC Configuration table entry. |
| 1.3.6.1.4.1.498.12.12.3.1.1.1 | Columnuas7626ConfigIndex | read-only | mandatory | Integer value which uniquely identifies the UAS7626 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.12.12.3.1.1.2 | Columnuas7626DataRate | read-write | mandatory | Object to select the Data Rate on Loop n. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.3.1.1.3 | Columnuas7626Highway | read-write | mandatory | Object to select the data highway for Loop n. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.3.1.1.4 | Columnuas7626TimeSlot | read-write | mandatory | Object to select the timeslots for the data highway given by uas7624Highway for loop n. Valid selections are 1-31 and 64. A value of 64 indicates the loop is n… |
| 1.3.6.1.4.1.498.12.12.4 | Nodeuas7626Diagnostics | |||
| 1.3.6.1.4.1.498.12.12.4.1 | Tableuas7626DiagTable | not-accessible | mandatory | The GDC 7626 Diagnostics table. Information in the entries of this table support diagnostics testing, both active testing via patterns, and passive testing via… |
| 1.3.6.1.4.1.498.12.12.4.1.1 | Rowuas7626DiagEntry | not-accessible | mandatory | The GDC 7626 Diagnostics table entry. |
| 1.3.6.1.4.1.498.12.12.4.1.1.1 | Columnuas7626DiagIndex | read-only | mandatory | Integer value which uniquely identifies the UAS7626 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.12.12.4.1.1.2 | Columnuas7626TestSelection | read-write | mandatory | Selects the test to run. A selection of stopTest(1) stops the current test. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.4.1.1.3 | Columnuas7626TestResults | read-only | mandatory | Returns the self test bit error count. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.4.1.1.4 | Columnuas7626ResetTestResults | read-write | mandatory | Resets the self test bit error count. A value of norm(1) cannot be set by management and is always returned on a read. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.5 | Nodeuas7626Performance | |||
| 1.3.6.1.4.1.498.12.12.5.3 | Tableuas7626CurrentTable | not-accessible | mandatory | The uas7626 Current table contains various statistics being collected for the current 15 minute interval. |
| 1.3.6.1.4.1.498.12.12.5.3.1 | Rowuas7626CurrentEntry | not-accessible | mandatory | An entry in the uas7626 Current table. |
| 1.3.6.1.4.1.498.12.12.5.3.1.1 | Columnuas7626CurrentIndex | read-only | mandatory | Integer value which uniquely identifies the UAS7626 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.12.12.5.3.1.2 | Columnuas7626CurrentStat | read-only | mandatory | Returns a bitwise snapshot of the current 15 minute statistics: Octet 1 bit 7 - not used bit 6 - future use bit 5 - future use bit 4 - 2^4 bit 3 - 2^3 bit 2 - … |
| 1.3.6.1.4.1.498.12.12.5.4 | Tableuas7626IntervalTable | not-accessible | mandatory | The uas7626 Interval table contains various statistics collected by each Interface over the last 16 15-minute intervals. |
| 1.3.6.1.4.1.498.12.12.5.4.1 | Rowuas7626IntervalEntry | not-accessible | mandatory | An entry in the Interval table. |
| 1.3.6.1.4.1.498.12.12.5.4.1.1 | Columnuas7626IntervalIndex | read-only | mandatory | Integer value which uniquely identifies the UAS7626 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.12.12.5.4.1.2 | Columnuas7626IntervalNumber | read-only | mandatory | The interval number 1- 16. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.5.4.1.3 | Columnuas7626IntervalStat | read-only | mandatory | Returns a bitwise snapshot of the interval statistics. Octet 1 bit 7 - not used bit 6 - future use bit 5 - future use bit 4 - 2^4 bit 3 - 2^3 bit 2 - 2^2 bit 1… |
| 1.3.6.1.4.1.498.12.12.5.5 | Tableuas7626TotalTable | not-accessible | mandatory | The uas7626 Total Table contains the totals of the various statistics collected for the current 24 hour period for each interface. |
| 1.3.6.1.4.1.498.12.12.5.5.1 | Rowuas7626TotalEntry | not-accessible | mandatory | An entry in the uas7626 Total table. |
| 1.3.6.1.4.1.498.12.12.5.5.1.1 | Columnuas7626TotalIndex | read-only | mandatory | Integer value which uniquely identifies the UAS7626 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.12.12.5.5.1.2 | Columnuas7626TotalStat | read-only | mandatory | Returns a bitwise snapshot of the current 24 hour statistics. Octet 1 bit 7 - not used bit 6 - future use bit 5 - future use bit 4 - 2^4 bit 3 - 2^3 bit 2 - 2^… |
| 1.3.6.1.4.1.498.12.12.5.6 | Tableuas7626Recent24HrTable | not-accessible | mandatory | The Recent 24 Hour table contains the totals of the various statistics collected for the previous 24 hour period for each interface. |
| 1.3.6.1.4.1.498.12.12.5.6.1 | Rowuas7626Recent24HrEntry | not-accessible | mandatory | An entry in the Recent24Hr table. |
| 1.3.6.1.4.1.498.12.12.5.6.1.1 | Columnuas7626Recent24HrIndex | read-only | mandatory | Integer value which uniquely identifies the UAS7626 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.12.12.5.6.1.2 | Columnuas7626Recent24HrStat | read-only | mandatory | Returns a bitwise snapshot of the recent 24 hour statistics. Octet 1 bit 7 - not used bit 6 - future use bit 5 - future use bit 4 - 2^4 bit 3 - 2^3 bit 2 - 2^2… |
| 1.3.6.1.4.1.498.12.12.5.7 | Tableuas7626UnavailableTimeRegTable | not-accessible | mandatory | The 7626 Unavailable Time Register table. |
| 1.3.6.1.4.1.498.12.12.5.7.1 | Rowuas7626UnavailableTimeRegEntry | not-accessible | mandatory | An entry in the Unavailable Time Register table. |
| 1.3.6.1.4.1.498.12.12.5.7.1.1 | Columnuas7626UnavailableTimeRegIndex | read-only | mandatory | Integer value which uniquely identifies the UAS7626 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.12.12.5.7.1.2 | Columnuas7626UnavailableTimeRegNumber | read-only | mandatory | A number between 1 and 6, where the number is the number of the Unavailable Time Register. |
| 1.3.6.1.4.1.498.12.12.5.7.1.3 | Columnuas7626UnavailableTimeRegStart | read-only | mandatory | Start time of one of the Unavailable Time Registers. |
| 1.3.6.1.4.1.498.12.12.5.7.1.4 | Columnuas7626UnavailableTimeRegStop | read-only | mandatory | Stop time of one of the Unavailable Time Registers. |
| 1.3.6.1.4.1.498.12.12.6 | Nodeuas7626AlarmConfig | |||
| 1.3.6.1.4.1.498.12.12.6.1 | Tableuas7626AlarmConfigTable | not-accessible | mandatory | This table contains entries that configure Alarm reporting. |
| 1.3.6.1.4.1.498.12.12.6.1.1 | Rowuas7626AlarmConfigEntry | not-accessible | mandatory | An entry in the uas7626 Alarm Configuration table. |
| 1.3.6.1.4.1.498.12.12.6.1.1.1 | Columnuas7626AlarmConfigIndex | read-only | mandatory | Integer value which uniquely identifies the UAS7626 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.12.12.6.1.1.2 | Columnuas7626AlarmConfigIdentifier | read-only | mandatory | format: iso.org.dod.internet.private.enterprises.gdc. bql2.uas7626.uas7626Alarms.ALM example: 1.3.6.1.4.1.498.12.12.7.ALM where ALM = 1 for uas7626NoResponse a… |
| 1.3.6.1.4.1.498.12.12.6.1.1.3 | Columnuas7626AlarmCountThreshold | read-write | mandatory | This function sets/reads the alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a given t… |
| 1.3.6.1.4.1.498.12.12.6.2 | Tableuas7626LocalAlarmConfigTable | not-accessible | mandatory | The uas7626LocalAlarmConfigTable contains entries that configure alarm reporting to the alarm card. |
| 1.3.6.1.4.1.498.12.12.6.2.1 | Rowuas7626LocalAlarmConfigEntry | not-accessible | mandatory | An entry in the GDC Local Alarm Configuration table. |
| 1.3.6.1.4.1.498.12.12.6.2.1.1 | Columnuas7626LocalAlarmConfigIndex | read-only | mandatory | Integer value which uniquely identifies the UAS7626 to which this entry is applicable. SCinstance is defined to be SLDi where: S (byte value) - physical shelf … |
| 1.3.6.1.4.1.498.12.12.6.2.1.2 | Columnuas7626LossOfClockLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.6.2.1.3 | Columnuas7626ESLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.6.2.1.4 | Columnuas7626UASLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.6.2.1.5 | Columnuas7626OutofSyncLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.6.2.1.6 | Columnuas7626NoSealingCurrentLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. Valid [i]nterface = 01-06 |
| 1.3.6.1.4.1.498.12.12.7 | Nodeuas7626Alarms | |||
| 1.3.6.1.4.1.498.12.12.7.1 | Nodeuas7626NoResponseAlm | |||
| 1.3.6.1.4.1.498.12.12.7.2 | Nodeuas7626DiagRxErrAlm | |||
| 1.3.6.1.4.1.498.12.12.7.3 | Nodeuas7626PowerUpAlm | |||
| 1.3.6.1.4.1.498.12.12.7.4 | Nodeuas7626LossofTransmitClockAlm | |||
| 1.3.6.1.4.1.498.12.12.7.5 | Nodeuas7626OutofSyncAlm | |||
| 1.3.6.1.4.1.498.12.12.7.6 | Nodeuas7626SealingCurrentNoContAlm | |||
| 1.3.6.1.4.1.498.12.12.7.7 | Nodeuas7626UASAlm | |||
| 1.3.6.1.4.1.498.12.12.7.8 | Nodeuas7626ESAlm | |||
| 1.3.6.1.4.1.498.12.12.7.9 | Nodeuas7626MajorBERAlm | |||
| 1.3.6.1.4.1.498.12.12.7.10 | Nodeuas7626MinorBERAlm |