GSC-OPT-MIB
142 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.29 | Tablecdx6500PPCTGSCPortTable | not-accessible | mandatory | This table contains GSC port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1 | Rowcdx6500PPCTGSCPortEntry | not-accessible | mandatory | Configuration parameters relevant to a GSC port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.1 | Columncdx6500GSCPCfgPortNumber | read-only | mandatory | Port number of the port being used by GSC |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.2 | Columncdx6500GSCPCfgPortType | read-only | mandatory | The Port Type of the port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.3 | Columncdx6500GSCPCfgSubtype | read-only | mandatory | The GSC port sub-type. gscHpad - Port is functioning as a host PAD. gscTpad - Port is functioning as a terminal PAD. |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.4 | Columncdx6500GSCPCfgClockSpeed | read-only | mandatory | This is the clock speed of the port in bits per second, when internal clocking is used. |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.5 | Columncdx6500GSCPCfgNumStations | read-only | mandatory | The number of stations/devices configured on this port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.6 | Columncdx6500GSCPCfgMinPollPeriod | read-only | mandatory | The minimum time the TPAD waits between polls. Specified in 50 ms increments (i.e. 1 means 50 ms). |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.7 | Columncdx6500GSCPCfgPollRespTimer | read-only | mandatory | The maximum time the TPAD waits for a response from the terminal after a poll. Specified in 50 ms increments (i.e. 5 means 250 ms). |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.8 | Columncdx6500GSCPCfgAckTimeOut | read-only | mandatory | The maximum time the TPAD or HPAD waits for acknowledgement for a transmitted frame. Specified in 50 ms increments (i.e. 5 means 250 ms). |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.9 | Columncdx6500GSCPCfgInterCharTimeOut | read-only | mandatory | The maximum time period allowed between received characters. Specified in 50 ms increments (i.e. 5 means 250 ms). |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.10 | Columncdx6500GSCPCfgBroadcastHoldTimeOut | read-only | mandatory | The time the TPAD holds a broadcast frame from one station, when it detects a dropped frame, while waiting for the missing frame from another station. Specifie… |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.11 | Columncdx6500GSCPCfgSolicitedTimeOut | read-only | mandatory | Specifies the time that the TPAD waits for a SAD message in response to a PAD message, before re-transmitting the PAD message. Specified in 50 ms increments (i… |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.12 | Columncdx6500GSCPCfgIdleDiscTimeOut | read-only | mandatory | The period that the HPAD waits to receive a UAD-frame, SAD-frame or poll from the polling controller before clearing the call to the TPAD. Specified in minutes… |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.13 | Columncdx6500GSCPCfgAutocallRetryTimeOut | read-only | mandatory | Specifies the time to wait between subsequent autocall attempts. Specified in 50 ms increments. (i.e. 4 means 200 ms). |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.14 | Columncdx6500GSCPCfgMaxAutocallRetries | read-only | mandatory | The maximum number of autocall attempts allowed. The port is disabled when the limit is reached. |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.15 | Columncdx6500GSCPCfgN1 | read-only | mandatory | The number of good responses a TPAD must receive before changing a stations state from UP to DOWN . |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.16 | Columncdx6500GSCPCfgN2 | read-only | mandatory | The number of good responses a TPAD must receive before changing a stations state from DOWN to UP. |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.17 | Columncdx6500GSCPCfgNumRetries | read-only | mandatory | The number of times the TPAD or HPAD will retry a selection procedure before discarding a frame. |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.18 | Columncdx6500GSCPCfgPortAddress | read-only | mandatory | When a GSC port makes a call,this address is inserted into the calling address field. |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.19 | Columncdx6500GSCPCfgPortOptions | read-only | mandatory | The port options specified : NONE - No option specified. |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.20 | Columncdx6500GSCPCfgConnType | read-only | mandatory | Specifies the control signal handshake and clocking required for a connection to be made to this port. simp - simple, no control signals required. simpa - CTS … |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.21 | Columncdx6500GSCPCfgWakeUpTimer | read-only | mandatory | Specifies the time to wait after autocall attempts are exhausted before attempting another autocall cycle. A value of 0 will prevent subsequent attempts until … |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.22 | Columncdx6500GSCPCfgElectricalInterfaceType | read-only | mandatory | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 -… |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.23 | Columncdx6500GSCPCfgV24ElectricalInterfaceOption | read-only | mandatory | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| 1.3.6.1.4.1.449.2.1.2.1.1.29.1.24 | Columncdx6500GSCPCfgHighSpeedElectricalInterfaceOption | read-only | mandatory | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| 1.3.6.1.4.1.449.2.1.2.1.3 | Nodecdx6500PCTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.3.8 | Tablecdx6500SPCTGSCStationTable | not-accessible | mandatory | This table contains GSC station configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.3.8.1 | Rowcdx6500SPCTGSCStationEntry | not-accessible | mandatory | Each StationEntry contains the configuration parameters for one GSC station. |
| 1.3.6.1.4.1.449.2.1.2.1.3.8.1.1 | Columncdx6500GSCSCfgPortNumber | read-only | mandatory | Port number of the port being used by GSC. |
| 1.3.6.1.4.1.449.2.1.2.1.3.8.1.2 | Columncdx6500GSCSCfgStationNumber | read-only | mandatory | The number of devices on the multidrop line. Also used for routing purposes. |
| 1.3.6.1.4.1.449.2.1.2.1.3.8.1.3 | Columncdx6500GSCSCfgStationAddress | read-only | mandatory | The device address on the local line. |
| 1.3.6.1.4.1.449.2.1.2.1.3.8.1.4 | Columncdx6500GSCSCfgRemoteAddress | read-only | mandatory | The device address on the remote line. |
| 1.3.6.1.4.1.449.2.1.2.1.3.8.1.5 | Columncdx6500GSCSCfgAutocallMnem | read-only | mandatory | Identifies the entry in the Autocall Mnemonic table which specifies the X.25 call request parameters for this station.This is valid only if the port subtype is… |
| 1.3.6.1.4.1.449.2.1.2.1.3.8.1.6 | Columncdx6500GSCSCfgProtocolId | read-only | mandatory | The protocol ID inserted in outgoing calls and checked for incoming calls. |
| 1.3.6.1.4.1.449.2.1.2.1.3.8.1.7 | Columncdx6500GSCSCfgBillingRecords | read-only | mandatory | billingOff - Billing records are not generated. billingOn - Billing records are generated. |
| 1.3.6.1.4.1.449.2.1.2.1.3.8.1.8 | Columncdx6500GSCSCfgStationOptions | read-only | mandatory | GSC station options: NONE - no option specified IBRO - Inband Broadcast frames supported on this channel. One or more options may be specified by summing (sepa… |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.30 | Tablecdx6500PPSTGSCPortTable | not-accessible | mandatory | This table holds statistics items for GSC ports. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1 | Rowcdx6500PPSTGSCPortEntry | not-accessible | mandatory | Statistics parameters pertaining to GSC Ports. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.1 | Columncdx6500GSCPStatPortNumber | read-only | mandatory | The port number of the GSC port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.2 | Columncdx6500GSCPStatPortType | read-only | mandatory | The port type. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.3 | Columncdx6500GSCPStatSubtype | read-only | mandatory | The port sub-type. gscHpad - port is functioning as a host PAD. gscTpad - Port is functioning as a terminal PAD. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.4 | Columncdx6500GSCPStatPortStatus | read-only | mandatory | Status of the port: disabled - Port is disabled. enabled - Port is enabled. busyOut - The port is busied out. up - At least one station on the port is not down… |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.5 | Columncdx6500GSCPStatPortSpeed | read-only | mandatory | The measured port speed in bits per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.6 | Columncdx6500GSCPStatLastStatsReset | read-only | mandatory | The time when the port statistics were last reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.7 | Columncdx6500GSCPStatCharsIn | read-only | mandatory | Number of characters received on the line, including data and control characters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.8 | Columncdx6500GSCPStatCharsOut | read-only | mandatory | Number of characters transmitted on the line, including data and control characters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.9 | Columncdx6500GSCPStatCharsInPerSec | read-only | mandatory | Number of characters received per second on the line, including data and control characters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.10 | Columncdx6500GSCPStatCharsOutPerSec | read-only | mandatory | Number of characters transmitted per second on the line, including data and control characters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.11 | Columncdx6500GSCPStatOverrunErrs | read-only | mandatory | The number of overrun errors detected on the line. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.12 | Columncdx6500GSCPStatChecksumErrs | read-only | mandatory | The number of frames received with checksum errors. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.13 | Columncdx6500GSCPStatOverlengthFrames | read-only | mandatory | The number of frames received that were over length. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.14 | Columncdx6500GSCPStatPollRespTimeOuts | read-only | mandatory | The number of times a poll was issued without response from the terminal. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.15 | Columncdx6500GSCPStatIntercharTimeOuts | read-only | mandatory | The number of receive frames aborted because of inter-character timeouts. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.16 | Columncdx6500GSCPStatAckTimeOuts | read-only | mandatory | The number of transmitted frames which were not acknowledged. |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.17 | Columncdx6500GSCPStatPADFrames | read-only | mandatory | The number of PAD frames received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.18 | Columncdx6500GSCPStatSADFrames | read-only | mandatory | The number of SAD frames transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.19 | Columncdx6500GSCPStatUADFrames | read-only | mandatory | The number of UAD frames transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.20 | Columncdx6500GSCPStatBROFrames | read-only | mandatory | The number of BRO frames transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.21 | Columncdx6500GSCPStatPADChars | read-only | mandatory | The number of PAD characters received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.22 | Columncdx6500GSCPStatSADChars | read-only | mandatory | The number of SAD characters transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.23 | Columncdx6500GSCPStatUADChars | read-only | mandatory | The number of UAD characters transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.24 | Columncdx6500GSCPStatENQs | read-only | mandatory | The number of ENQ characters received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.25 | Columncdx6500GSCPStatPACChars | read-only | mandatory | The number of PAC characters received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.26 | Columncdx6500GSCPStatSACChars | read-only | mandatory | The number of SAC characters transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.27 | Columncdx6500GSCPStatUACChars | read-only | mandatory | The number of UAC characters transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.1.30.1.28 | Columncdx6500GSCPStatPolls | read-only | mandatory | The number of polls transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3 | Nodecdx6500PSTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.3.7 | Tablecdx6500SPSTGSCStationTable | not-accessible | mandatory | Statistics parameters relevant to GSC stations. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1 | Rowcdx6500SPSTGSCStationEntry | not-accessible | mandatory | This table holds statistics parameters pertaining to GSC stations. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.1 | Columncdx6500GSCSStatPortNumber | read-only | mandatory | The port number of the GSC port. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.2 | Columncdx6500GSCSStatStationNum | read-only | mandatory | The GSC station number. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.3 | Columncdx6500GSCSStatPortType | read-only | mandatory | This indicates the port type. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.4 | Columncdx6500GSCSStatSubtype | read-only | mandatory | Indicates the sub-type of the associated port. gscHpad - Associated port is functioning as a host PAD. gscTpad - Associated port is functioning as a terminal P… |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.5 | Columncdx6500GSCSStatStationAddress | read-only | mandatory | Configure station address. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.6 | Columncdx6500GSCSStatStationStatus | read-only | mandatory | The station status: disabled - Station is disabled. enabled - Station is enabled. busyOut - Station is busied out. up - Station is up. down - Station is down. … |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.7 | Columncdx6500GSCSStatLastStatsReset | read-only | mandatory | Time when the station statistics were last reset. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.8 | Columncdx6500GSCSStatCharsIn | read-only | mandatory | Number of characters received on the line, including data and control characters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.9 | Columncdx6500GSCSStatCharsOut | read-only | mandatory | Number of characters transmitted on the line, including data and control characters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.10 | Columncdx6500GSCSStatCharsInPerSec | read-only | mandatory | Number of characters received per second on the line, including data and control characters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.11 | Columncdx6500GSCSStatCharsOutPerSec | read-only | mandatory | Number of characters transmitted per second on the line, including data and control characters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.12 | Columncdx6500GSCSStatChecksumErrs | read-only | mandatory | The number of frames received with checksum errors. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.13 | Columncdx6500GSCSStatOverlengthFrames | read-only | mandatory | The number of frames received that were overlength. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.14 | Columncdx6500GSCSStatPollRespTimeOuts | read-only | mandatory | The number of times a poll was issued without response from the terminal (TPAD only). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.15 | Columncdx6500GSCSStatIntercharTimeOuts | read-only | mandatory | The number of receive frames aborted because of inter-character timeouts. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.16 | Columncdx6500GSCSStatAckTimeOuts | read-only | mandatory | The number of transmitted frames which were not acknowledged. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.17 | Columncdx6500GSCSStatPADFrames | read-only | mandatory | The number of PAD frames received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.18 | Columncdx6500GSCSStatSADFrames | read-only | mandatory | The number of SAD frames transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.19 | Columncdx6500GSCSStatUADFrames | read-only | mandatory | The number of UAD frames transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.20 | Columncdx6500GSCSStatBROFrames | read-only | mandatory | The number of BRO frames transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.21 | Columncdx6500GSCSStatPADChars | read-only | mandatory | The number of PAD characters received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.22 | Columncdx6500GSCSStatSADChars | read-only | mandatory | The number of SAD characters transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.23 | Columncdx6500GSCSStatUADChars | read-only | mandatory | The number of UAD characters transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.24 | Columncdx6500GSCSStatENQ | read-only | mandatory | The number of ENQ characters received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.25 | Columncdx6500GSCSStatPACChars | read-only | mandatory | The number of PAC characters received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.26 | Columncdx6500GSCSStatSACChars | read-only | mandatory | The number of SAC characters transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.27 | Columncdx6500GSCSStatUACChars | read-only | mandatory | The number of UAC characters transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.28 | Columncdx6500GSCSStatPolls | read-only | mandatory | The number of Polls transmitted (TPAD) or received (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.29 | Columncdx6500GSCSStatPADMessages | read-only | mandatory | The number of PAD Messages received (HPAD) or transmitted (TPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.30 | Columncdx6500GSCSStatUADMessages | read-only | mandatory | The number of UAD Messages received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.31 | Columncdx6500GSCSStatSADMessages | read-only | mandatory | The number of SAD Messages received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.32 | Columncdx6500GSCSStatBROMessages | read-only | mandatory | The number of BRO Messages received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.33 | Columncdx6500GSCSStatSolicitAbort | read-only | mandatory | The number of SOLICIT ABORT Messages received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.34 | Columncdx6500GSCSStatStatusEnq | read-only | mandatory | The number of STATUS ENQ Messages received (HPAD) or transmitted (TPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.35 | Columncdx6500GSCSStatDeviceUp | read-only | mandatory | The number of DEVICE UP Messages received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.36 | Columncdx6500GSCSStatDeviceDown | read-only | mandatory | The number of DEVICE DOWN Messages received (TPAD) or transmitted (HPAD). |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.37 | Columncdx6500GSCSStatCallCurrentStatus | read-only | mandatory | The current status of the call. inhibited :Current Status = Disconnected. disconnected :Current Status = Disconnected. calling :Current Status = Calling. calle… |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.38 | Columncdx6500GSCSStatLastClrCauseCode | read-only | mandatory | Last clear cause code. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.39 | Columncdx6500GSCSStatLastClrDiagCode | read-only | mandatory | Last clear diagnostic code. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.40 | Columncdx6500GSCSStatLastInCalledAddress | read-only | mandatory | The called address in the last inbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.41 | Columncdx6500GSCSStatLastInCallingAddress | read-only | mandatory | The calling address in the last inbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.42 | Columncdx6500GSCSStatLastInCallFacilities | read-only | mandatory | The facilities in the last inbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.43 | Columncdx6500GSCSStatLastInCallCUD | read-only | mandatory | The Call User Data in the last inbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.44 | Columncdx6500GSCSStatLastOutCalledAddress | read-only | mandatory | The called address in the last outbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.45 | Columncdx6500GSCSStatLastOutCallingAddress | read-only | mandatory | The calling address in the last outbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.46 | Columncdx6500GSCSStatLastOutCallFacilities | read-only | mandatory | The facilities in the last outbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.3.7.1.47 | Columncdx6500GSCSStatLastOutCallCUD | read-only | mandatory | The Call User Data in the last outbound call. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls | |||
| 1.3.6.1.4.1.449.2.1.4.12 | Nodecdx6500ContGSC | |||
| 1.3.6.1.4.1.449.2.1.4.12.1 | Tablecdx6500ContGSCPTable | not-accessible | mandatory | This table contains the port control objects |
| 1.3.6.1.4.1.449.2.1.4.12.1.1 | Rowcdx6500ContGSCPTableEntry | not-accessible | mandatory | Each entry represents a port control parameter. |
| 1.3.6.1.4.1.449.2.1.4.12.1.1.1 | Columncdx6500ContGSCPPortNum | not-accessible | mandatory | GSC port Number. |
| 1.3.6.1.4.1.449.2.1.4.12.1.1.2 | Columncdx6500ContGSCPBootPort | write-only | mandatory | Boot the specified GSC port. boot : Boot the port noBoot : Do not boot the port. |
| 1.3.6.1.4.1.449.2.1.4.12.1.1.3 | Columncdx6500ContGSCPEnablePort | write-only | mandatory | Enable the specified GSC port. enable : Enable the GSC port. noEnable : Do not enable the GSC port. |
| 1.3.6.1.4.1.449.2.1.4.12.1.1.4 | Columncdx6500ContGSCPDisablePort | write-only | mandatory | Disable the specified GSC port. disable : Disable the GSC port. noDisable : Do not disable the GSC port. |
| 1.3.6.1.4.1.449.2.1.4.12.2 | Tablecdx6500ContGSCSTable | not-accessible | mandatory | This table contains the station control objects. |
| 1.3.6.1.4.1.449.2.1.4.12.2.1 | Rowcdx6500ContGSCSTableEntry | not-accessible | mandatory | Each entry represents a station control parameter. |
| 1.3.6.1.4.1.449.2.1.4.12.2.1.1 | Columncdx6500ContGSCSPortNum | not-accessible | mandatory | The GSC Port Number. |
| 1.3.6.1.4.1.449.2.1.4.12.2.1.2 | Columncdx6500ContGSCSStnNum | not-accessible | mandatory | The GSC Station Number. |
| 1.3.6.1.4.1.449.2.1.4.12.2.1.3 | Columncdx6500ContGSCSBootStation | write-only | mandatory | Boot the specified GSC station boot : Boot the station. noBoot : Do not boot the station. |
| 1.3.6.1.4.1.449.2.1.4.12.2.1.4 | Columncdx6500ContGSCSEnableStation | write-only | mandatory | Enable the specified GSC station. enable : Enable the Station. noEnable : Do not enable the Station. |
| 1.3.6.1.4.1.449.2.1.4.12.2.1.5 | Columncdx6500ContGSCSDisableStation | write-only | mandatory | Disable the specified GSC station. disable : Disable the station. noDisable : Do not disable the station. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |