GUARDIAN-MIB
120 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises OBJECT-TYPE |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3166 | Nodewestek | |||
| 1.3.6.1.4.1.3166.1 | Nodeguardian | |||
| 1.3.6.1.4.1.3166.1.0 | NodeinputsAlert | Trap generated if any of the Inputs are activated | ||
| 1.3.6.1.4.1.3166.1.1 | NodefanAlert | Trap generated if any Fan speeds are outside limits | ||
| 1.3.6.1.4.1.3166.1.1 | ScalarguardianRev | read-only | mandatory | The name and revision number of Guardian card. Revision = Major.Minor.Codeversion. |
| 1.3.6.1.4.1.3166.1.2 | Nodedevice | |||
| 1.3.6.1.4.1.3166.1.2 | NodetempAlert | Trap generated if temperature exceeds limits | ||
| 1.3.6.1.4.1.3166.1.2.1 | NodedevInput | |||
| 1.3.6.1.4.1.3166.1.2.1.1 | NodedevInput1 | |||
| 1.3.6.1.4.1.3166.1.2.1.1.1 | ScalardevInp1Val | read-write | mandatory | Input Switch 1 current value, 1=Switched |
| 1.3.6.1.4.1.3166.1.2.1.1.2 | ScalardevInp1Pol | read-write | mandatory | Input Switch 1 Polarity, 1=Inverted |
| 1.3.6.1.4.1.3166.1.2.1.2 | NodedevInput2 | |||
| 1.3.6.1.4.1.3166.1.2.1.2.1 | ScalardevInp2Val | read-write | mandatory | Input Switch 2 current value, 1=Switched |
| 1.3.6.1.4.1.3166.1.2.1.2.2 | ScalardevInp2Pol | read-write | mandatory | Input Switch 2 Polarity, 1=Inverted |
| 1.3.6.1.4.1.3166.1.2.1.3 | NodedevInput3 | |||
| 1.3.6.1.4.1.3166.1.2.1.3.1 | ScalardevInp3Val | read-write | mandatory | Input Switch 3 current value, 1=Switched |
| 1.3.6.1.4.1.3166.1.2.1.3.2 | ScalardevInp3Pol | read-write | mandatory | Input Switch 3 Polarity, 1=Inverted |
| 1.3.6.1.4.1.3166.1.2.1.4 | NodedevInput4 | |||
| 1.3.6.1.4.1.3166.1.2.1.4.1 | ScalardevInp4Val | read-write | mandatory | Input Switch 4 current value, 1=Switched |
| 1.3.6.1.4.1.3166.1.2.1.4.2 | ScalardevInp4Pol | read-write | mandatory | Input Switch 4 Polarity, 1=Inverted |
| 1.3.6.1.4.1.3166.1.2.1.10 | ScalardevInpStat | read-write | mandatory | Status bits for Inputs Bit 0-3 = Inputs 1-4 |
| 1.3.6.1.4.1.3166.1.2.2 | NodedevFan | |||
| 1.3.6.1.4.1.3166.1.2.2.1 | NodedevFan1 | |||
| 1.3.6.1.4.1.3166.1.2.2.1.1 | ScalardevFan1Val | read-only | mandatory | Current Fan 1 Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.1.2 | ScalardevFan1Min | read-write | mandatory | Fan 1 Minimum Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.1.3 | ScalardevFan1Max | read-write | mandatory | Fan 1 Maximum Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.2 | NodedevFan2 | |||
| 1.3.6.1.4.1.3166.1.2.2.2.1 | ScalardevFan2Val | read-only | mandatory | Current Fan 2 Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.2.2 | ScalardevFan2Min | read-write | mandatory | Fan 2 Minimum Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.2.3 | ScalardevFan2Max | read-write | mandatory | Fan 2 Maximum Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.3 | NodedevFan3 | |||
| 1.3.6.1.4.1.3166.1.2.2.3.1 | ScalardevFan3Val | read-only | mandatory | Current Fan 3 Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.3.2 | ScalardevFan3Min | read-write | mandatory | Fan 3 Minimum Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.3.3 | ScalardevFan3Max | read-write | mandatory | Fan 3 Maximum Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.4 | NodedevFan4 | |||
| 1.3.6.1.4.1.3166.1.2.2.4.1 | ScalardevFan4Val | read-only | mandatory | Current Fan 4 Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.4.2 | ScalardevFan4Min | read-write | mandatory | Fan 4 Minimum Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.4.3 | ScalardevFan4Max | read-write | mandatory | Fan 4 Maximum Speed in RPM |
| 1.3.6.1.4.1.3166.1.2.2.10 | ScalardevFanStat | read-write | mandatory | Status bits for Fans Bit 0-3 = Fans 1-4 |
| 1.3.6.1.4.1.3166.1.2.3 | NodedevTemp | |||
| 1.3.6.1.4.1.3166.1.2.3.1 | NodedevTemp1 | |||
| 1.3.6.1.4.1.3166.1.2.3.1.1 | ScalardevTemp1Val | read-only | mandatory | Current Probe 1 Temperature |
| 1.3.6.1.4.1.3166.1.2.3.1.2 | ScalardevTemp1Min | read-write | mandatory | Probe 1 Minimum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.1.3 | ScalardevTemp1Max | read-write | mandatory | Probe 1 Maximum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.2 | NodedevTemp2 | |||
| 1.3.6.1.4.1.3166.1.2.3.2.1 | ScalardevTemp2Val | read-only | mandatory | Current Probe 2 Temperature |
| 1.3.6.1.4.1.3166.1.2.3.2.2 | ScalardevTemp2Min | read-write | mandatory | Probe 2 Minimum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.2.3 | ScalardevTemp2Max | read-write | mandatory | Probe 2 Maximum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.3 | NodedevTemp3 | |||
| 1.3.6.1.4.1.3166.1.2.3.3.1 | ScalardevTemp3Val | read-only | mandatory | Current Probe 3 Temperature |
| 1.3.6.1.4.1.3166.1.2.3.3.2 | ScalardevTemp3Min | read-write | mandatory | Probe 3 Minimum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.3.3 | ScalardevTemp3Max | read-write | mandatory | Probe 3 Maximum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.4 | NodedevTemp4 | |||
| 1.3.6.1.4.1.3166.1.2.3.4.1 | ScalardevTemp4Val | read-only | mandatory | Current Probe 4 Temperature |
| 1.3.6.1.4.1.3166.1.2.3.4.2 | ScalardevTemp4Min | read-write | mandatory | Probe 4 Minimum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.4.3 | ScalardevTemp4Max | read-write | mandatory | Probe 4 Maximum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.5 | NodedevTemp5 | |||
| 1.3.6.1.4.1.3166.1.2.3.5.1 | ScalardevTemp5Val | read-only | mandatory | Current Probe 5 Temperature |
| 1.3.6.1.4.1.3166.1.2.3.5.2 | ScalardevTemp5Min | read-write | mandatory | Probe 5 Minimum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.5.3 | ScalardevTemp5Max | read-write | mandatory | Probe 5 Maximum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.6 | NodedevTemp6 | |||
| 1.3.6.1.4.1.3166.1.2.3.6.1 | ScalardevTemp6Val | read-only | mandatory | Current Probe 6 Temperature |
| 1.3.6.1.4.1.3166.1.2.3.6.2 | ScalardevTemp6Min | read-write | mandatory | Probe 6 Minimum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.6.3 | ScalardevTemp6Max | read-write | mandatory | Probe 6 Maximum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.7 | NodedevTemp7 | |||
| 1.3.6.1.4.1.3166.1.2.3.7.1 | ScalardevTemp7Val | read-only | mandatory | Current Probe 7 Temperature |
| 1.3.6.1.4.1.3166.1.2.3.7.2 | ScalardevTemp7Min | read-write | mandatory | Probe 7 Minimum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.7.3 | ScalardevTemp7Max | read-write | mandatory | Probe 7 Maximum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.8 | NodedevTemp8 | |||
| 1.3.6.1.4.1.3166.1.2.3.8.1 | ScalardevTemp8Val | read-only | mandatory | Current Probe 8 Temperature |
| 1.3.6.1.4.1.3166.1.2.3.8.2 | ScalardevTemp8Min | read-write | mandatory | Probe 8 Minimum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.8.3 | ScalardevTemp8Max | read-write | mandatory | Probe 8 Maximum Temperature |
| 1.3.6.1.4.1.3166.1.2.3.10 | ScalardevTempStat | read-write | mandatory | Status bits for Temp probes Bit 0-7 = Temps 1-8 |
| 1.3.6.1.4.1.3166.1.2.4 | NodedevISA | |||
| 1.3.6.1.4.1.3166.1.2.4.1 | NodedevISAP12 | |||
| 1.3.6.1.4.1.3166.1.2.4.1.1 | ScalardevISAP12Val | read-only | mandatory | Current ISA Bus +12V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.1.2 | ScalardevISAP12Min | read-write | mandatory | Minimum ISA Bus +12V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.1.3 | ScalardevISAP12Max | read-write | mandatory | Maximum ISA Bus +12V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.2 | NodedevISAP5 | |||
| 1.3.6.1.4.1.3166.1.2.4.2.1 | ScalardevISAP5Val | read-only | mandatory | Current ISA Bus +5V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.2.2 | ScalardevISAP5Min | read-write | mandatory | Minimum ISA Bus +5V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.2.3 | ScalardevISAP5Max | read-write | mandatory | Maximum ISA Bus +5V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.3 | NodedevISAN5 | |||
| 1.3.6.1.4.1.3166.1.2.4.3.1 | ScalardevISAN5Val | read-only | mandatory | Current ISA Bus -5V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.3.2 | ScalardevISAN5Min | read-write | mandatory | Minimum ISA Bus -5V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.3.3 | ScalardevISAN5Max | read-write | mandatory | Maximum ISA Bus -5V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.4 | NodedevISAN12 | |||
| 1.3.6.1.4.1.3166.1.2.4.4.1 | ScalardevISAN12Val | read-only | mandatory | Current ISA Bus -12V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.4.2 | ScalardevISAN12Min | read-write | mandatory | Minimum ISA Bus -12V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.4.3 | ScalardevISAN12Max | read-write | mandatory | Maximum ISA Bus -12V value (x100) |
| 1.3.6.1.4.1.3166.1.2.4.10 | ScalardevISAStat | read-write | mandatory | Status bits for ISA Voltages, Bits 0-3 = +12,+5,-5,-12 |
| 1.3.6.1.4.1.3166.1.2.5 | NodedevDC | |||
| 1.3.6.1.4.1.3166.1.2.5.1 | NodedevDCP12 | |||
| 1.3.6.1.4.1.3166.1.2.5.1.1 | ScalardevDCP12Val | read-only | mandatory | Current Drive Connector +12V value (x100) |
| 1.3.6.1.4.1.3166.1.2.5.1.2 | ScalardevDCP12Min | read-write | mandatory | Minimum Drive Connector +12V value (x100) |
| 1.3.6.1.4.1.3166.1.2.5.1.3 | ScalardevDCP12Max | read-write | mandatory | Maximum Drive Connector +12V value (x100) |
| 1.3.6.1.4.1.3166.1.2.5.2 | NodedevDCP5 | |||
| 1.3.6.1.4.1.3166.1.2.5.2.1 | ScalardevDCP5Val | read-only | mandatory | Current Drive Connector +5V value (x100) |
| 1.3.6.1.4.1.3166.1.2.5.2.2 | ScalardevDCP5Min | read-write | mandatory | Minimum Drive Connector +5V value (x100) |
| 1.3.6.1.4.1.3166.1.2.5.2.3 | ScalardevDCP5Max | read-write | mandatory | Maximum Drive Connector +5V value (x100) |
| 1.3.6.1.4.1.3166.1.2.5.10 | ScalardevDCStat | read-write | mandatory | Status bits for DC Voltages, Bits 0-1 = +12,+5 |
| 1.3.6.1.4.1.3166.1.3 | Scalarcontrol | read-write | mandatory | Guardian Control Functions 1=Reset Errors, 2=Write settings to NVRAM, 3=Reset to NVRAM, 4=Reset to factory defaults. |
| 1.3.6.1.4.1.3166.1.3 | NodeisaAlert | Trap generated if ISA Bus voltages exceed limits | ||
| 1.3.6.1.4.1.3166.1.4 | NodedcAlert | Trap generated if disk connector voltages exceed limits | ||
| 1.3.6.1.4.1.3166.1.4 | Nodemasks | |||
| 1.3.6.1.4.1.3166.1.4.1 | ScalarfanErrors | read-write | mandatory | BITMASK - Enable Fan Errors, Bit 0=Fan1 |
| 1.3.6.1.4.1.3166.1.4.2 | ScalartempErrors | read-write | mandatory | BITMASK - Enable Temp Errors, Bit 0=Temp1 |
| 1.3.6.1.4.1.3166.1.4.3 | ScalarisaErrors | read-write | mandatory | BITMASK - Enable ISA Bus Errors, Bit 0=+12v |
| 1.3.6.1.4.1.3166.1.4.4 | ScalardcErrors | read-write | mandatory | BITMASK - Enable Drive Connector Bus Errors, Bit 0=+12v, 1=+5v |
| 1.3.6.1.4.1.3166.1.4.7 | ScalarinputPSU | read-write | mandatory | BITMASK - Treat Input switches as PSU Errors, Bit 0-1=Input1=PSU Error |
| 1.3.6.1.4.1.3166.1.4.8 | ScalarinputTamper | read-write | mandatory | BITMASK - Treat Input switches as Tamper Errors, Bit 0-1=Input1=Tamper Error |
| 1.3.6.1.4.1.3166.1.4.9 | ScalarenOutput0 | read-write | mandatory | BITMASK - Enable Outputs/LED's on errors - Bit 0=Power,1=Fan,2=Temp,3=PSU,4=Tamper,5=Watchdog. |
| 1.3.6.1.4.1.3166.1.4.10 | ScalarenOutput1 | read-write | mandatory | BITMASK - Enable Outputs/LED's on errors - Bit 0=Power,1=Fan,2=Temp,3=PSU,4=Tamper,5=Watchdog. |
| 1.3.6.1.4.1.3166.1.4.11 | ScalarenOutput2 | read-write | mandatory | BITMASK - Enable Outputs/LED's on errors - Bit 0=Power,1=Fan,2=Temp,3=PSU,4=Tamper,5=Watchdog. |
| 1.3.6.1.4.1.3166.1.4.12 | ScalarenOutput3 | read-write | mandatory | BITMASK - Enable Outputs/LED's on errors - Bit 0=Power,1=Fan,2=Temp,3=PSU,4=Tamper,5=Watchdog. |
| 1.3.6.1.4.1.3166.1.4.13 | ScalarenBeeper | read-write | mandatory | BITMASK - Enable Beeper on errors - Bit 0=Power,1=Fan,2=Temp,3=PSU,4=Tamper,5=Watchdog. |
| 1.3.6.1.4.1.3166.1.4.14 | ScalarenRelay | read-write | mandatory | BITMASK - Enable Relay on errors - Bit 0=Power,1=Fan,2=Temp,3=PSU,4=Tamper,5=Watchdog. |
| 1.3.6.1.4.1.3166.1.4.15 | ScalarenReset | read-write | mandatory | BITMASK - Enable Reset on errors - Bit 0=Power,1=Fan,2=Temp,3=PSU,4=Tamper,5=Watchdog. |
| 1.3.6.1.4.1.3166.1.5 | Nodespecial | |||
| 1.3.6.1.4.1.3166.1.5.1 | Scalarwatchdog | read-write | mandatory | Current Watchdog timeout left in seconds, 0=Disabled |