Gadz-1-MIB
161 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1754 | Nodegadzoox | |||
| 1.3.6.1.4.1.1754.1 | NodenetMgmt | |||
| 1.3.6.1.4.1.1754.1.1 | Nodecommon | |||
| 1.3.6.1.4.1.1754.1.1.1 | Nodesystem | |||
| 1.3.6.1.4.1.1754.1.1.1.1 | ScalarsysReset | write-only | mandatory | Setting this object results in the reset of the device. The context of warm vs cold is a function of the device's abilities. |
| 1.3.6.1.4.1.1754.1.1.1.2 | ScalarsysDiagnostic | read-write | mandatory | When the sysDiagnostic object is written, it causes a diagnostic function to be executed. When read, it returns 0 for a successful completion of the test, 1 fo… |
| 1.3.6.1.4.1.1754.1.1.1.3 | Nodezoning | |||
| 1.3.6.1.4.1.1754.1.1.1.3.1 | ScalarnlZoningPolicyControlOwner | read-write | mandatory | The entity that last configured, or is currently configuring the zoning policy. |
| 1.3.6.1.4.1.1754.1.1.1.3.2 | ScalarnlZoningPolicyTimeout | read-write | mandatory | The timeout value to be used in configuring the zoning agent. The default value is 30 seconds. |
| 1.3.6.1.4.1.1754.1.1.1.3.3 | ScalarnlZoningPolicyStatus | read-only | mandatory | The status of the current zoning policy configuration. |
| 1.3.6.1.4.1.1754.1.1.1.3.4 | ScalarnlZoningPolicyControl | read-write | mandatory | The control of the current zoning policy configuration. The procedure for zoning policy configuration is as follows: - user reads nlActiveZoneTable AND/OR nlAc… |
| 1.3.6.1.4.1.1754.1.1.1.3.5 | ScalarnlZoningPolicyLastError | read-only | mandatory | The last error condition string returned from the zoning agent. |
| 1.3.6.1.4.1.1754.1.1.1.3.6 | ScalarnlPendingZoneCount | read-only | mandatory | Number of Pending configured zones for this proxied domain |
| 1.3.6.1.4.1.1754.1.1.1.3.7 | TablenlPendingZoneTable | not-accessible | mandatory | The Pending Zone Table. - this is the zone table the NMS is building up in the proxy domain, before activating it. |
| 1.3.6.1.4.1.1754.1.1.1.3.7.1 | RownlPendingZoneEntry | not-accessible | mandatory | nlPendingZone table entry |
| 1.3.6.1.4.1.1754.1.1.1.3.7.1.1 | ColumnnlPendingZoneIndex | read-only | mandatory | An identifier which uniquely identifies a zone in the nlPendingZoneTable |
| 1.3.6.1.4.1.1754.1.1.1.3.7.1.2 | ColumnnlPendingZoneName | read-write | mandatory | Specifies the name of the zone. This name is also unique in the Pending Zone Table |
| 1.3.6.1.4.1.1754.1.1.1.3.7.1.3 | ColumnnlPendingZoneType | read-write | mandatory | Specifies the type of the zone |
| 1.3.6.1.4.1.1754.1.1.1.3.7.1.4 | ColumnnlPendingZoneMembers | read-write | mandatory | Specifies A sequence of zone member indicies for this zone. Write to this object to add a set of zone members to a zone. |
| 1.3.6.1.4.1.1754.1.1.1.3.7.1.5 | ColumnnlPendingZoneLipToZonePolicy | read-write | mandatory | Specifies state of lip propagation policy 0: No lips should propagate into the zone 1: Only SCSI targets are allowed to propagate lips into the zone. 2: Lips a… |
| 1.3.6.1.4.1.1754.1.1.1.3.8 | ScalarnlPendingZoneMemberCount | read-only | mandatory | Number of pending zone members for this proxied domain |
| 1.3.6.1.4.1.1754.1.1.1.3.9 | TablenlPendingZoneMemberTable | not-accessible | mandatory | Pending Zone Member Table. This table keeps track of the pending zone members that the current snmp zone configuration session has written to the device. If no… |
| 1.3.6.1.4.1.1754.1.1.1.3.9.1 | RownlPendingZoneMemberEntry | not-accessible | mandatory | nlPendingZoneMember table entry |
| 1.3.6.1.4.1.1754.1.1.1.3.9.1.1 | ColumnnlPendingZoneMemberIndex | read-only | mandatory | An identifier which uniquely identifies a zone member. |
| 1.3.6.1.4.1.1754.1.1.1.3.9.1.2 | ColumnnlPendingZoneMemberName | write-only | mandatory | Specifies the name of the zone member. To add an entry to the list of zone member names, a write should be done to index 0. |
| 1.3.6.1.4.1.1754.1.1.1.3.9.1.3 | ColumnnlPendingZoneMemberType | write-only | mandatory | Specifies the type of this zone member. The type of the zone member dicates the structure of the PendingZoneMemberID. To add an entry to the list of zone membe… |
| 1.3.6.1.4.1.1754.1.1.1.3.9.1.4 | ColumnnlPendingZoneMemberID | write-only | mandatory | Specifies the intrinsic ID of this zone member. To add an entry to the list of zone member names, a write should be done to index 0. If the ZoneMemberType is P… |
| 1.3.6.1.4.1.1754.1.1.1.3.10 | ScalarnlActiveZoneCount | read-only | mandatory | Number of active configured zones for this proxied domain. When this object is read the 'Zoning Configuration Event' bit in the devEventStatus object will be r… |
| 1.3.6.1.4.1.1754.1.1.1.3.11 | TablenlActiveZoneTable | not-accessible | mandatory | Active Zone Table. |
| 1.3.6.1.4.1.1754.1.1.1.3.11.1 | RownlActiveZoneEntry | not-accessible | mandatory | nlActiveZone table entry |
| 1.3.6.1.4.1.1754.1.1.1.3.11.1.1 | ColumnnlActiveZoneIndex | read-only | mandatory | An identifier which uniquely identifies a zone. |
| 1.3.6.1.4.1.1754.1.1.1.3.11.1.2 | ColumnnlActiveZoneName | read-only | mandatory | Specifies the name of the zone |
| 1.3.6.1.4.1.1754.1.1.1.3.11.1.3 | ColumnnlActiveZoneType | read-only | mandatory | Specifies the type of the zone |
| 1.3.6.1.4.1.1754.1.1.1.3.11.1.4 | ColumnnlActiveZoneAddressSpace | read-only | mandatory | Specifies the address space this zone is in. An address space defines a set of Zones whose members share the same FC-AL address range. |
| 1.3.6.1.4.1.1754.1.1.1.3.11.1.5 | ColumnnlActiveZoneMembers | read-only | mandatory | Specifies A sequence of zone member indexes for this zone. List is terminated by a value of zero. |
| 1.3.6.1.4.1.1754.1.1.1.3.11.1.6 | ColumnnlActiveZoneLipToZonePolicy | read-only | mandatory | Specifies state of lip propagation policy 0: No lips should propagate into the zone 1: Only SCSI targets are allowed to propagate lips into the zone. 2: Lips a… |
| 1.3.6.1.4.1.1754.1.1.1.3.12 | ScalarnlActiveZoneMemberCount | read-only | mandatory | Number of configured zone members for this proxied domain |
| 1.3.6.1.4.1.1754.1.1.1.3.13 | TablenlActiveZoneMemberTable | not-accessible | mandatory | Active Zone Member Table. |
| 1.3.6.1.4.1.1754.1.1.1.3.13.1 | RownlActiveZoneMemberEntry | not-accessible | mandatory | nlActiveZoneMember table entry |
| 1.3.6.1.4.1.1754.1.1.1.3.13.1.1 | ColumnnlActiveZoneMemberIndex | read-only | mandatory | An identifier which uniquely identifies a zone member. |
| 1.3.6.1.4.1.1754.1.1.1.3.13.1.2 | ColumnnlActiveZoneMemberName | read-only | mandatory | Specifies the name of the zone member |
| 1.3.6.1.4.1.1754.1.1.1.3.13.1.3 | ColumnnlActiveZoneMemberType | read-only | mandatory | Specifies the type of this zone member. The type of the zone member dictates the structure of the ActiveZoneMemberID |
| 1.3.6.1.4.1.1754.1.1.1.3.13.1.4 | ColumnnlActiveZoneMemberID | read-only | mandatory | Specifies the intrinsic ID of this zone member. The structure definition is identical to that of nlPendingZoneMemberID. |
| 1.3.6.1.4.1.1754.1.1.3 | Nodedownload | |||
| 1.3.6.1.4.1.1754.1.1.3.1 | ScalardownloadFile | read-write | mandatory | The file name to be downloaded from the TFTP server when a download is next requested via this MIB. This value is set to the zero length string when no file na… |
| 1.3.6.1.4.1.1754.1.1.3.2 | ScalardownloadBootFile | read-write | mandatory | The file name of the switch operational code to be executed on power up. This value is set to the zero length string when no file name has been specified. |
| 1.3.6.1.4.1.1754.1.1.3.3 | ScalardownloadTFTPServer | read-write | mandatory | The IP address of the TFTP server that contains the boot image to load when a download is next requested via this MIB. This value is set to `0.0.0.0' when no I… |
| 1.3.6.1.4.1.1754.1.1.3.4 | ScalardownloadTargetID | read-write | mandatory | The IntraCom ID of the device to download to. A value of 0 specifies the IntraCom master (i.e., the proxy agent). Values greater than 0 specify proxied devices. |
| 1.3.6.1.4.1.1754.1.1.3.5 | ScalardownloadAction | read-write | mandatory | When this object is set to downloadToPROM(2), the device will discontinue its normal operation and begin download of the image specified by downloadFile to the… |
| 1.3.6.1.4.1.1754.1.1.3.6 | ScalardownloadStatus | read-only | mandatory | The status of the last download procedure, if any. This object will have a value of downloadStatusUnknown(2) if no download process has been performed. |
| 1.3.6.1.4.1.1754.1.1.3.7 | ScalardownloadRetry | read-write | mandatory | Number of retries for each download attempt. |
| 1.3.6.1.4.1.1754.1.1.3.8 | ScalardownloadTimeOut | read-write | mandatory | Timeout value (in seconds) for each download retry. |
| 1.3.6.1.4.1.1754.1.1.3.9 | ScalardownloadCfgFileFileName | read-write | mandatory | The file name of the backup configuration files. The switches current configuration is saved in the backup configuration file. The switches configuration is al… |
| 1.3.6.1.4.1.1754.1.1.3.10 | ScalardownloadCfgFileServerIp | read-write | mandatory | The IP address of the TFTP server that the backup configuration file will be saved to and restored from. This value is set to `0.0.0.0' when no IP address has … |
| 1.3.6.1.4.1.1754.1.1.3.11 | ScalardownloadCfgFileAction | read-write | mandatory | When this object is set to backupConfig(1), the device will write it's current configuration files as downloadCfgFileFileName.* to the server specified by down… |
| 1.3.6.1.4.1.1754.1.1.3.12 | ScalardownloadCfgFileBkupStatus | read-only | mandatory | The status of the last know backup/restore procedure, if any. This object will have a value of BackUpRestoreStatusUnknown(2) if no backup/restore process has b… |
| 1.3.6.1.4.1.1754.1.1.4 | Nodesecurity | |||
| 1.3.6.1.4.1.1754.1.1.5 | Nodediscovery | |||
| 1.3.6.1.4.1.1754.1.1.6 | Nodemonitor | |||
| 1.3.6.1.4.1.1754.1.1.7 | Nodeproxy | |||
| 1.3.6.1.4.1.1754.1.1.7.1 | ScalarproxyMaxMembers | read-only | mandatory | The maximum number of 'Proxy Managed Interconnect Devices' that can be supported from this agent. |
| 1.3.6.1.4.1.1754.1.1.7.2 | ScalarproxyCurMembers | read-only | mandatory | The number of 'Proxy Managed Interconnect Devices' currently connected to this agent. |
| 1.3.6.1.4.1.1754.1.1.7.3 | ScalarproxyChanges | read-only | mandatory | A count of the number of times 'Proxy Managed Interconnect Devices' have been added to or removed from this agent. |
| 1.3.6.1.4.1.1754.1.1.7.4 | ScalarproxyBoardID | read-only | mandatory | An Element Identifier to identify the physical IC board that contains the proxy agent. It's format is only relevant to Gadzoox service personnel. |
| 1.3.6.1.4.1.1754.1.1.7.5 | ScalarproxyFirmwareVersion | read-only | mandatory | An 'Element Identifier' to identify the firmware version of this SNMP proxy. The format of this identifier is as follows: MM.mm = majorVersion.minorVersion 02.… |
| 1.3.6.1.4.1.1754.1.1.7.6 | ScalarproxyTopologyCRC | read-write | mandatory | CRC conducted on the Topology Table. Read: A change in this value indicates a change to the proxy domain ('Proxy Managed Interconnect Device' addition, deletio… |
| 1.3.6.1.4.1.1754.1.1.7.7 | ScalarproxyEventStatus | read-only | mandatory | Register for Proxy Agent events. Events are 'Proxy Managed Interconnect Device' specific representing alarm-type events such as temperature/fan fault or change… |
| 1.3.6.1.4.1.1754.1.1.7.8 | ScalarproxyDeviceEventInd | read-only | mandatory | Sequential Device ID indication of any 'Proxy Managed Interconnect Device' events. Each successive read of this object will cycle to the next ID in the list th… |
| 1.3.6.1.4.1.1754.1.1.7.9 | TabledeviceTable | not-accessible | mandatory | A table of devices currently connected to the same Proxy Domain as this agent. |
| 1.3.6.1.4.1.1754.1.1.7.9.1 | RowdeviceEntry | not-accessible | mandatory | Proxy Device Entry |
| 1.3.6.1.4.1.1754.1.1.7.9.1.1 | ColumndevDeviceID | read-only | mandatory | An integer, ranging consecutively from 1 to proxyCurMembers, which uniquely identifies a particular proxied device. It is not guaranteed, nor should it be assu… |
| 1.3.6.1.4.1.1754.1.1.7.9.1.2 | ColumndevOID | read-only | mandatory | The authoritative identification of the box which provides an easy and unambiguous means for determining the type of box. |
| 1.3.6.1.4.1.1754.1.1.7.9.1.3 | ColumndevProductID | read-only | mandatory | An' Element Identifier' to identify the product type and serial number of this device. |
| 1.3.6.1.4.1.1754.1.1.7.9.1.4 | ColumndevBoardID | read-only | mandatory | An 'Element Identifier' to identify the primary IC board for the proxied device. |
| 1.3.6.1.4.1.1754.1.1.7.9.1.5 | ColumndevFirmwareVersion | read-only | mandatory | An 'Element Identifier' to identify the firmware version of this proxied device. |
| 1.3.6.1.4.1.1754.1.1.7.9.1.6 | ColumndevEventStatus | read-only | mandatory | This bit-mapped register defines event indicators for the proxied device. Each bit in this register represents a single event defined as follows. Register Defi… |
| 1.3.6.1.4.1.1754.1.1.7.9.1.7 | ColumndevReset | write-only | mandatory | Resets the proxied device. 'Cold' reset will initialize the device to the power-on state and execute a full self-test diagnostic. 'Warm' reset does the same bu… |
| 1.3.6.1.4.1.1754.1.1.7.9.1.8 | ColumndevDiagnostic | read-only | mandatory | When the this object is written, it causes a diagnostic function to be executed. When read, it returns 0 for a successful completion of the test, 1 for test in… |
| 1.3.6.1.4.1.1754.1.1.7.9.1.9 | ColumndevSysUpTimestamp | read-only | mandatory | The value of the device's sysUpTime at the time this object was last initialized. If the object has not been initialized since the last reinitialization of the… |
| 1.3.6.1.4.1.1754.1.1.7.9.1.10 | ColumndevCumulativeUpTime | read-only | mandatory | Total number of hours that the device has be on. This is a persistent value that survives power cycle. |
| 1.3.6.1.4.1.1754.1.1.7.9.1.11 | ColumndevContact | read-write | mandatory | User definable ASCII string to indication contact name for the device. This is a persistent value that survives power cycles. |
| 1.3.6.1.4.1.1754.1.1.7.9.1.12 | ColumndevLocation | read-write | mandatory | User definable ASCII string to indication location for the device. This is a persistent value that survives power cycles. |
| 1.3.6.1.4.1.1754.1.1.7.9.1.13 | ColumndevTopologyLink | read-only | mandatory | Toplogy Link. A unique octet triplet that associates a proxied device to the overall topology of the proxy domain. Register Definition: BYTE 1 : Parent IntraCo… |
| 1.3.6.1.4.1.1754.1.1.7.9.1.14 | ColumndevBeaconOnTime | read-write | mandatory | Time (in 100ths of seconds) that Beacon LED is on. A value of zero (with devBeaconOffTime non-zero) will turn the LED permanently off. This object is not suppo… |
| 1.3.6.1.4.1.1754.1.1.7.9.1.15 | ColumndevBeaconOffTime | read-write | mandatory | Time (in 100ths of seconds) that Beacon LED is off. A value of zero (with devBeaconOnTime non-zero) will turn the LED permanently on.B |
| 1.3.6.1.4.1.1754.1.1.7.9.1.16 | ColumndevFaultLedState | read-only | mandatory | State of Fault LED, 0=OFF, 1=ON. |
| 1.3.6.1.4.1.1754.1.1.7.9.1.17 | ColumndevNumPorts | read-only | mandatory | Number of configured ports for this proxied device. In the case of a chassis based device, this object represents the number of slots in the box |
| 1.3.6.1.4.1.1754.1.1.7.9.1.18 | ColumndevType | read-only | mandatory | Description data for this proxied device: Byte 3: OEM 1 Gadzoox (open market) 2 Hewlett Packard 3 Compaq 4 3Com 5 Sun Byte 2: masterType: 0 this is a slave hub… |
| 1.3.6.1.4.1.1754.1.1.7.9.1.19 | ColumndevDescriptor | read-only | mandatory | An ASCII string to identify this device. |
| 1.3.6.1.4.1.1754.1.1.7.10 | ScalarproxyControl | read-write | mandatory | This bit-mapped register declares this SNMP Proxy Agent as the one and only 'active' proxy agent from a possible set of potential SNMP Proxy Agents. Other pote… |
| 1.3.6.1.4.1.1754.1.1.7.11 | Nodepolicy | |||
| 1.3.6.1.4.1.1754.1.1.8 | Nodegbic | |||
| 1.3.6.1.4.1.1754.1.1.8.1 | TablegbicTable | not-accessible | mandatory | A table of serial GBIC information, indexed by device and port. Only GBIC-based devices must implement this table. Each port of a GBIC-based device will have a… |
| 1.3.6.1.4.1.1754.1.1.8.1.1 | RowgbicEntry | not-accessible | mandatory | GBIC table entry |
| 1.3.6.1.4.1.1754.1.1.8.1.1.1 | ColumngbicDeviceIndex | read-only | mandatory | An identifier which uniquely identifies a device. |
| 1.3.6.1.4.1.1754.1.1.8.1.1.2 | ColumngbicPortIndex | read-only | mandatory | An identifier which uniquely identifies a device port. |
| 1.3.6.1.4.1.1754.1.1.8.1.1.3 | ColumngbicEntryValid | read-only | mandatory | A flag that indicates whether or not this entry contains valid information. |
| 1.3.6.1.4.1.1754.1.1.8.1.1.4 | ColumngbicInfo | read-only | mandatory | An encoded string that provides information for the serial GBIC associated with this entry's device and port indices. This value is only valid if the associate… |
| 1.3.6.1.4.1.1754.1.2 | Nodehub | |||
| 1.3.6.1.4.1.1754.1.3 | NodeareaSwitch | |||
| 1.3.6.1.4.1.1754.1.4 | NodechannelAgent | |||
| 1.3.6.1.4.1.1754.1.5 | Nodetraps | |||
| 1.3.6.1.4.1.1754.1.5.1 | TabletrapIPaddrTable | not-accessible | mandatory | A table of IP addresses to which traps should be sent. |
| 1.3.6.1.4.1.1754.1.5.1.1 | RowtrapIPentry | not-accessible | mandatory | trap table entry |
| 1.3.6.1.4.1.1754.1.5.1.1.1 | ColumntrapIndex | read-only | mandatory | An identifier which uniquely identifies the device to send the trap to. |
| 1.3.6.1.4.1.1754.1.5.1.1.2 | ColumntrapIPaddr | read-write | mandatory | The IP address of the device to send the trap to. To add an entry to the list of Trap IP addresses, a write should be done to index 0. To delete an entry from … |
| 1.3.6.1.4.1.1754.1.5.2 | ScalartrapDevID | read-only | mandatory | The deviceID of the device with the trap condition. |
| 1.3.6.1.4.1.1754.1.5.3 | ScalartrapDevType | read-only | mandatory | The type of device with the trap condition. The definition of this field is identical to devType. |
| 1.3.6.1.4.1.1754.1.5.4 | ScalartrapDevEventStatus | read-only | mandatory | The event status of the device with the trap condition. The definition of this field is identical to devEventStatus. |
| 1.3.6.1.4.1.1754.1.5.5 | ScalartrapDevEnvironmentStatus | read-only | mandatory | The environmental status of the device with the trap condition. The definition of this field depends on the type of device for which this trap was sent. |
| 1.3.6.1.4.1.1754.1.5.6 | ScalartrapDevPortStatus | read-only | mandatory | The port status of the device with the trap condition. The definition of this field depends on the type of device for whom this trap was sent. The assumption i… |
| 1.3.6.1.4.1.1754.1.5.7 | ScalartrapDevPortAttributes | read-only | mandatory | The port attributes of the device with the trap condition. The definition of this field depends on the type of device for whom this trap was sent. The assumpti… |
| 1.3.6.1.4.1.1754.1.5.8 | ScalartrapDevConfigStatus | read-only | mandatory | The Configuration Status of the device with the trap condition. The definition of this field depends on the type of device for whom this trap was sent. Example… |
| 1.3.6.1.4.1.1754.1.5.9 | ScalartrapDevLIPStatus | read-only | mandatory | The Lip status of the device with the trap condition. The definition of this field depends on the type of device for whom this trap was sent. Examples of this … |
| 1.3.6.1.4.1.1754.1.5.10 | ScalartrapMaxNumberTrapTargets | read-only | mandatory | The maximumnum number of IP addresses that can be specified as recepients of traps that are sent from this device. |
| 1.3.6.1.4.1.1754.1.6 | Nodeswitch | |||
| 1.3.6.1.4.1.1754.1.6.1 | NodecapChas | |||
| 1.3.6.1.4.1.1754.1.6.1.1 | TablecapChasTable | not-accessible | mandatory | A table of Capellix chassis devices currently connected to the same agent. |
| 1.3.6.1.4.1.1754.1.6.1.1 | NodetrapLIPStatus | Information to be sent describing an LIP trap from an IntraCom device. Note that this trap may not be supported on some Gadzoox devices | ||
| 1.3.6.1.4.1.1754.1.6.1.1.1 | RowcapChasEntry | not-accessible | mandatory | capChas table entry |
| 1.3.6.1.4.1.1754.1.6.1.1.1.1 | ColumncapChasDeviceID | read-only | mandatory | An identifier which uniquely identifies this device. |
| 1.3.6.1.4.1.1754.1.6.1.1.1.2 | ColumncapChasFeatureMask | read-only | mandatory | A bitmask indicating the features supported on this device. Certain MIB objects are supported only if the underlying feature is supported, as indicated by this… |
| 1.3.6.1.4.1.1754.1.6.1.1.1.3 | ColumncapChasEventStatus | read-only | mandatory | This 2 byte bit-mapped register defines the asynchronous events that can occur on the chassis. When this object is read the 'Chassis Event' bit in the devEvent… |
| 1.3.6.1.4.1.1754.1.6.1.1.1.4 | ColumncapChasLedStatus | read-only | mandatory | This bitmapped object indicates state of each of the chassis LEDs. Values: 0 = LED is OFF, 1 = LED in ON. Register Definition: BYTE 0: Bit 0: power LED Bit 1: … |
| 1.3.6.1.4.1.1754.1.6.1.1.1.5 | ColumncapChasModuleStatus | read-only | mandatory | This bitmapped object indicates the presence of optional chassis modules (PIMs, power supplies, fan trays) that may or may not be installed in the chassis. A v… |
| 1.3.6.1.4.1.1754.1.6.1.1.1.6 | ColumncapChasWorldWideName | read-only | mandatory | World Wide Name associated with this chassis. |
| 1.3.6.1.4.1.1754.1.6.1.1.1.7 | ColumncapChasTemperature | read-only | mandatory | Internal Temperature of the chassis (in degrees C). |
| 1.3.6.1.4.1.1754.1.6.1.1.1.8 | ColumncapChasTempMaxAllowed | read-only | mandatory | Maximum Allowable Internal Temperature of the chassis . |
| 1.3.6.1.4.1.1754.1.6.1.1.1.9 | ColumncapChasTempMaxThreshold | read-write | mandatory | User-configurable Maximum Internal Temperature Threshold of the chassis. |
| 1.3.6.1.4.1.1754.1.6.1.1.1.10 | ColumncapChasSANDoctor | read-write | mandatory | User-configurable SAN Doctor function of the chassis. |
| 1.3.6.1.4.1.1754.1.6.1.2 | TablecapChasSlotTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.1754.1.6.1.2 | NodetrapMgmtTopologyChange | Information to be sent describing an topology change trap from an IntraCom device (subcode=2) | ||
| 1.3.6.1.4.1.1754.1.6.1.2.1 | RowcapChasSlotEntry | not-accessible | mandatory | Capellix chassis slot table entry |
| 1.3.6.1.4.1.1754.1.6.1.2.1.1 | ColumncapChasDevID | read-only | mandatory | An identifier which uniquely identifies the Capellix chassis that contains this PIM. |
| 1.3.6.1.4.1.1754.1.6.1.2.1.2 | ColumncapChasSlotNum | read-only | mandatory | The slot index of this PIM on this chassis. |
| 1.3.6.1.4.1.1754.1.6.1.2.1.3 | ColumncapChasPimDevID | read-only | mandatory | An identifier which uniquely identifies this PIM in the proxy domain. If this value is 0, this PIM is not managealbe by this chassis. |
| 1.3.6.1.4.1.1754.1.6.1.2.1.4 | ColumncapSlotPimType | read-only | mandatory | Description data for this PIM The enumeration of the bytes in this object are identicial to that defined in the object devType. |
| 1.3.6.1.4.1.1754.1.6.1.2.1.5 | ColumncapSlotPimStatus | read-only | mandatory | The value of this object indicates the general status of this PIM. |
| 1.3.6.1.4.1.1754.1.6.1.2.1.6 | ColumncapSlotPimIPaddr | read-only | mandatory | The (potential) IP address of this PIM. If a PIM does not support an IP address, this value is 0. |
| 1.3.6.1.4.1.1754.1.6.1.3 | NodetrapEnvironment | Information to be sent describing an environmental trap from an IntraCom device (subcode=3) | ||
| 1.3.6.1.4.1.1754.1.6.1.4 | NodetrapPortStatus | Information to be sent describing an port status trap from an IntraCom device (subcode=4) | ||
| 1.3.6.1.4.1.1754.1.6.1.5 | NodetrapConfigurationStatus | Information to be sent describing an configuration trap from an IntraCom device (subcode=5) | ||
| 1.3.6.1.4.1.1754.1.6.2 | NodecapPim | |||
| 1.3.6.1.4.1.1754.1.6.2.1 | TablecapPimTable | not-accessible | mandatory | A table of Capellix chassis PIMs currently connected to the same agent. |
| 1.3.6.1.4.1.1754.1.6.2.1.1 | RowcapPimEntry | not-accessible | mandatory | capPim table entry |
| 1.3.6.1.4.1.1754.1.6.2.1.1.1 | ColumncapPimDeviceID | read-only | mandatory | An identifier which uniquely identifies this PIM. |
| 1.3.6.1.4.1.1754.1.6.2.1.1.2 | ColumncapPimFeatureMask | read-only | mandatory | A bitmask indicating the features supported on this device. Certain MIB objects are supported only if the underlying feature is supported, as indicated by this… |
| 1.3.6.1.4.1.1754.1.6.2.1.1.3 | ColumncapPimEventStatus | read-only | mandatory | This 2 byte bit-mapped register defines the asynchronous events that can occur on the PIM. When this object is read the 'PIM Event' bit in the devEventStatus o… |
| 1.3.6.1.4.1.1754.1.6.2.1.1.4 | ColumncapPimLedStatus | read-only | mandatory | This bitmapped object indicates state of each of the PIM LEDs. Values: 0 = LED is OFF, 1 = LED in ON. Register Definition: BYTE 0: Bit 0: power LED Bit 1: faul… |
| 1.3.6.1.4.1.1754.1.6.2.1.1.5 | ColumncapPimPortAttributes | read-only | mandatory | A 16 byte bitmapped octet string that describes the attributes of each of the ports on this PIM. Bytes 0 - 15 describe ports 1 - 16 respectively. Register Defi… |
| 1.3.6.1.4.1.1754.1.6.2.1.1.6 | ColumncapPimPortStatus | read-only | mandatory | This 16 byte bitmapped object describes the status of each of the ports on the PIM. The layout of the bits in each byte is as follows: Bit Meaning 3-0 encoded … |
| 1.3.6.1.4.1.1754.1.6.2.2 | TablecapPortTable | not-accessible | mandatory | A table of port objects for the Capellix PIM's |
| 1.3.6.1.4.1.1754.1.6.2.2.1 | RowcapPortEntry | not-accessible | mandatory | cap port table entry |
| 1.3.6.1.4.1.1754.1.6.2.2.1.1 | ColumncapPortDeviceID | read-only | mandatory | An identifier which uniquely identifies the capellix PIM that contains this port. |
| 1.3.6.1.4.1.1754.1.6.2.2.1.2 | ColumncapPortIndex | read-only | mandatory | The index of this port on the device. |
| 1.3.6.1.4.1.1754.1.6.2.2.1.3 | ColumncapPortType | read-write | mandatory | Port Type 0: unknown 1: initiator 2: target 3: both initator and target |
| 1.3.6.1.4.1.1754.1.6.2.2.1.4 | ColumncapPortForcedBypass | read-write | mandatory | Force Port Bypass Control 0: forced port bypass mode is DISABLED 1: forced port bypass mode is ENABLED |
| 1.3.6.1.4.1.1754.1.6.2.2.1.5 | ColumncapPortLipType | read-write | mandatory | Lip Generation Type 0: generate LIP F7 (if LIP generation is enabled) 1: generate LIP F8 (if LIP generation is enabled) |
| 1.3.6.1.4.1.1754.1.6.2.2.1.6 | ColumncapPortAlpaCount | read-only | mandatory | The total number of detected ALPAs for this port. indicates detection of ALPA 1, and so on. This count is cleared upon either loop initialization or bypass of … |
| 1.3.6.1.4.1.1754.1.6.2.2.1.7 | ColumncapPortAlpaBitmap | read-only | mandatory | Bitmap of ALPAs detected on this port. Bytes 0-15 form an LoopID bitmap similar in form to the bitmaps used in FC-AL address assignment (LIFA/LIPA/LIHA/LISA). … |
| 1.3.6.1.4.1.1754.1.6.2.2.1.8 | ColumncapPortLipInitiatorCount | read-only | mandatory | Counts the number of times that this port was the first to detect a LIP during loop initialization. |