H150E-MIB
126 objects
HiPath 3000 and Hicom 150E/H MIB.
Imported Objects
| RFC1155-SMI | IpAddress |
| SNMPv2-SMI | enterprises MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.231 | Nodesni | |||
| 1.3.6.1.4.1.231.7 | NodesiemensUnits | |||
| 1.3.6.1.4.1.231.7.2 | Nodepn | |||
| 1.3.6.1.4.1.231.7.2.9 | Identityh150eOffice | HiPath 3000 and Hicom 150E/H MIB. | ||
| 1.3.6.1.4.1.231.7.2.9.1 | Nodeh150eControlGroup | |||
| 1.3.6.1.4.1.231.7.2.9.1.1 | Scalarh150eSysState | read-write | current | The actual error state of the device. Contains the highest severity level of the recent error events. This object is updated automatically, but it can also be … |
| 1.3.6.1.4.1.231.7.2.9.1.2 | ScalartftpSwitchoverDateTime | read-write | current | Date and time for the switchover to the new system software. The configured time will be ignored, if the upgrade is started with the downloadAndImmediateSwitch… |
| 1.3.6.1.4.1.231.7.2.9.1.3 | ScalartftpDownloadAction | read-write | current | When this object is set to downloadAndImmediateSwitchover (2), the device will download the new software from the configured host. After the download is finish… |
| 1.3.6.1.4.1.231.7.2.9.1.4 | Scalarh150eResetControl | read-write | current | Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Wh… |
| 1.3.6.1.4.1.231.7.2.9.1.5 | Scalarh150eSwitchoverState | read-write | current | The values readyForSwitchover (1) and notReadyForSwitchover (2) indicate whether the system is ready to be switched over to the new software that was downloade… |
| 1.3.6.1.4.1.231.7.2.9.1.6 | Scalarh150eShadowFlashState | read-write | current | This object informs about the state of the shadow flash memory area which is used to buffer a new software image that is being downloaded to the system. A down… |
| 1.3.6.1.4.1.231.7.2.9.1.7 | Scalarh150eLoadLevel | read-only | current | The actual CPU load level (per cent). |
| 1.3.6.1.4.1.231.7.2.9.1.8 | Scalarh150eTrapRepetitions | read-write | current | The number of trap repetitions for error events marked as very important (log-and-multiple-trap). |
| 1.3.6.1.4.1.231.7.2.9.1.9 | Scalarh150eCdrBufferState | read-write | current | Use this object to delete the CDR buffer. |
| 1.3.6.1.4.1.231.7.2.9.1.10 | Scalarh150eLogBufferState | read-write | current | Use this object to delete the log data. |
| 1.3.6.1.4.1.231.7.2.9.2 | Nodeh150eErrorHistoryGroup | |||
| 1.3.6.1.4.1.231.7.2.9.2.1 | ScalarnumberOfErrorHistoryEntries | read-write | current | Contains the number of errors to be found in the error history table. This value can be used to delete the last x entries (reduce value by x) or to delete all … |
| 1.3.6.1.4.1.231.7.2.9.2.2 | Tableh150eErrorHistoryTable | not-accessible | current | This table contains information about the errors that occured. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1 | Rowh150eErrorHistoryEntry | not-accessible | current | The trap history table entries. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.1 | Columnh150eErrorIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.2 | Columnh150eErrorDateTime | read-only | current | Time, when the error occurred. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.3 | Columnh150eErrorClass | read-only | current | Contains the error class number (type of trap). |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.4 | Columnh150eErrorCode | read-only | current | Contains the error code. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.5 | Columnh150eAccessSlot | read-only | current | Contains the access slot for the error. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.6 | Columnh150eAccessPort | read-only | current | Contains the local access port of the error. Local means that port numbering starts with 0 for each card. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.7 | Columnh150eErrorDescription | read-only | current | Detailed information about errors. |
| 1.3.6.1.4.1.231.7.2.9.2.2.1.8 | Columnh150eErrorSeverity | read-only | current | Contains the severity of the specific error. |
| 1.3.6.1.4.1.231.7.2.9.3 | Nodeh150eSystemInfoGroup | |||
| 1.3.6.1.4.1.231.7.2.9.3.1 | ScalarsysHardwareVersion | read-only | current | Contains the version string of the system hardware. |
| 1.3.6.1.4.1.231.7.2.9.3.2 | ScalarsysSoftwareVersion | read-only | current | Contains the version string of the system software. |
| 1.3.6.1.4.1.231.7.2.9.3.3 | ScalarsysCodeNumber | read-only | current | Contains the code number of the system software. |
| 1.3.6.1.4.1.231.7.2.9.3.4 | ScalarsysSoftwareLocation | read-only | current | Contains location (address space) where the system software is currently running. |
| 1.3.6.1.4.1.231.7.2.9.3.5 | ScalarnumberOfSlotTableEntries | read-only | current | Contains the number of entries in the slot table. |
| 1.3.6.1.4.1.231.7.2.9.3.6 | Tableh150eSlotTable | not-accessible | current | This table contains information about the system slots. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1 | Rowh150eSlotTableEntry | not-accessible | current | The slot table entries. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.1 | ColumncardIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.2 | ColumncardBoxNum | read-only | current | Index of the box where the card is placed. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.3 | ColumncardSlotNum | read-only | current | Index of the slot where the card is placed. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.4 | ColumncardType | read-only | current | Code for the type of the card. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.5 | ColumncardDescription | read-only | current | Textual card description. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.6 | ColumncardCodeNumber | read-only | current | Contains the code number of the card software. |
| 1.3.6.1.4.1.231.7.2.9.3.6.1.7 | ColumncardState | read-only | current | Contains the state of the card. |
| 1.3.6.1.4.1.231.7.2.9.3.7 | ScalarnumberOfPortTableEntries | read-only | current | Contains the number of entries in the port table. |
| 1.3.6.1.4.1.231.7.2.9.3.8 | Tableh150ePortTable | not-accessible | current | This table contains information about the system ports. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1 | Rowh150ePortTableEntry | not-accessible | current | The port table entries. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1.1 | ColumnportIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1.2 | ColumnportCardIndex | read-only | current | Reference to the card the port is assigned to. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1.3 | ColumnportType | read-only | current | Contains the type of the port. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1.4 | ColumnportState | read-only | current | Contains the general state of the port. |
| 1.3.6.1.4.1.231.7.2.9.3.8.1.5 | ColumnportLock | read-write | current | This object contains the lock state of the port. A software lock can be enabled / disabled. Possible state transitions: unlocked -> lockedBySoftware lockedByHa… |
| 1.3.6.1.4.1.231.7.2.9.3.8.1.6 | ColumnportLogicalPortNumber | read-only | current | The logical port number. |
| 1.3.6.1.4.1.231.7.2.9.3.9 | ScalarnumberOfExtensionTableEntries | read-only | current | Contains the number of entries in the hardware extension table. |
| 1.3.6.1.4.1.231.7.2.9.3.10 | Tableh150eExtensionTable | not-accessible | current | This table contains information about the hardware extensions. |
| 1.3.6.1.4.1.231.7.2.9.3.10.1 | Rowh150eExtensionTableEntry | not-accessible | current | The extension table entries. |
| 1.3.6.1.4.1.231.7.2.9.3.10.1.1 | ColumnextensionIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.3.10.1.2 | ColumnextensionDescription | read-only | current | Contains a textual desription of the hardware extension. |
| 1.3.6.1.4.1.231.7.2.9.3.10.1.3 | ColumnextensionCodeNumber | read-only | current | Contains the code number of the hardware extension. |
| 1.3.6.1.4.1.231.7.2.9.3.11 | ScalarnumberOfLanConnTableEntries | read-only | current | Contains the number of entries in the LAN connection table. |
| 1.3.6.1.4.1.231.7.2.9.3.12 | Tableh150eLanConnTable | not-accessible | current | This table contains information about the interfaces available for LAN access of the device or its cards. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1 | Rowh150eLanConnTableEntry | not-accessible | current | The LAN connection table entries. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1.1 | ColumnlanConnIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1.2 | ColumnlanConnDescription | read-only | current | Textual desription on the LAN connection. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1.3 | ColumnlanConnIpAddress | read-only | current | IP address of the LAN connection. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1.4 | ColumnlanConnSubnetMask | read-only | current | Subnet mask of the LAN connection. |
| 1.3.6.1.4.1.231.7.2.9.3.12.1.5 | ColumnlanConnStatus | read-only | current | Status of the LAN Connection. |
| 1.3.6.1.4.1.231.7.2.9.3.13 | ScalarhiPathAllServeServerIpAddress | read-only | current | IP address of the HiPath AllServe (Venus) server. |
| 1.3.6.1.4.1.231.7.2.9.3.14 | ScalarindexOfLastPortStatusNotificationTrap | read-write | current | Index of last 'port status change' notification trap sent by the device. Note: only reset possible (0) |
| 1.3.6.1.4.1.231.7.2.9.3.15 | ScalarsysSnmpAgentVersion | read-only | current | Version number of the systems SNMP agent (formatting: x.y.z.) |
| 1.3.6.1.4.1.231.7.2.9.3.16 | ScalarsysShadowSoftwareVersion | read-only | current | Contains the version string of the inactive (shadow) system software. This is the software image that has been transferred to the system without triggering the… |
| 1.3.6.1.4.1.231.7.2.9.3.17 | ScalarsysHiPathSymbolSubInfo | read-only | current | Contains an URL to detailed symbol information in addition to the symbol information contained in the common mib object deviceSymbolInfo. |
| 1.3.6.1.4.1.231.7.2.9.3.18 | ScalarsysHiPathBranding | read-only | current | Contains the branding string of the device. |
| 1.3.6.1.4.1.231.7.2.9.3.19 | ScalarsysTimezoneOffset | read-only | current | Timezone offset in minutes. |
| 1.3.6.1.4.1.231.7.2.9.4 | Nodeh150eStatisticsGroup | |||
| 1.3.6.1.4.1.231.7.2.9.4.1 | ScalarnumberOfFeatureStatTableEntries | read-only | current | Contains the number of feature counters to be found in the table. |
| 1.3.6.1.4.1.231.7.2.9.4.2 | Tableh150eFeatureStatTable | not-accessible | current | This table contains information about the usage of specific system features. It is designed to monitor the use of these features for a limited time only, becau… |
| 1.3.6.1.4.1.231.7.2.9.4.2.1 | Rowh150eFeatureStatEntry | not-accessible | current | The feature statistics table entries. |
| 1.3.6.1.4.1.231.7.2.9.4.2.1.1 | ColumnfeatureIndex | read-only | current | Identification of an table entry enabled by this index. |
| 1.3.6.1.4.1.231.7.2.9.4.2.1.2 | ColumnfeatureDescription | read-only | current | Description of the feature. |
| 1.3.6.1.4.1.231.7.2.9.4.2.1.3 | ColumnfeatureCounter | read-only | current | This Counter indicates how often the feature was used since last system reload |
| 1.3.6.1.4.1.231.7.2.9.4.3 | ScalarfeatureStatTableReset | read-write | current | Enables reset (2) of all counters of the featureStatTable. |
| 1.3.6.1.4.1.231.7.2.9.5 | Nodeh150eCdrConfigGroup | |||
| 1.3.6.1.4.1.231.7.2.9.5.1 | Scalarh150eCdrSeparator | read-write | current | Separator between following CDRs: DOS mode (1): CRLF UNIX mode (2): LF |
| 1.3.6.1.4.1.231.7.2.9.5.2 | Scalarh150eCdrElementSeparator | read-write | current | Separator between the different elements of one CDR: pipe (0x7c): '|' semicolon (0x3b): ';' blank (0x20): ' ' NOTE: no write access for blank |
| 1.3.6.1.4.1.231.7.2.9.5.3 | Scalarh150eCdrThresholdValue | read-write | current | CDR buffer limit (only relevant for TFTP server mode): threshold value (in percent) for sending a CDR data notification trap recommended values: 0 to 80 |
| 1.3.6.1.4.1.231.7.2.9.5.4 | Scalarh150eCdrTftpFileCounter | read-write | current | CDR <FileCounter> (only relevant for TFTP client mode): For each transferred CDR-file a new filename is necassary filename: 'GDS<IPAdr>.c<FileCounter>' |
| 1.3.6.1.4.1.231.7.2.9.5.5 | Scalarh150eCdrTftpServerDestAddress | read-write | current | Destination IP addresse of CDR TFTP server (only relevant for TFTP client mode) |
| 1.3.6.1.4.1.231.7.2.9.5.6 | Scalarh150eCdrTftpServerAlternateDestAddress | read-write | current | Alternate destination IP addresse of CDR TFTP server (only relevant for TFTP client mode): is the CDR TFTP Server not reachable the switch transfers CDR data t… |
| 1.3.6.1.4.1.231.7.2.9.5.7 | Scalarh150eCdrTftpClientTimer | read-write | current | cycle time in minutes for initiating CDR output, max value 1439 minutes (23hours,59minutes) (only relevant for TFTP client mode) |
| 1.3.6.1.4.1.231.7.2.9.5.8 | Scalarh150eCdrTcpServerDestAddress | read-write | current | Destination IP addresse of CDR TCP server (only relevant for TCP client mode) |
| 1.3.6.1.4.1.231.7.2.9.5.9 | Scalarh150eCdrTcpServerDestPort | read-write | current | Destination TCP port of CDR TCP server (only relevant for TCP client mode) |
| 1.3.6.1.4.1.231.7.2.9.5.10 | Scalarh150eCdrOutputMode | read-write | current | CDR (Call Detailed Record) output mode: V24-Port (1): the PABX is permanently connected over a V.24 connection to an extern application and sends each CDR immi… |
| 1.3.6.1.4.1.231.7.2.9.5.11 | Scalarh150eIndexOfLastCdrNotificationTrap | read-write | current | Index of last CDR notification trap sent by device Note: only reset possible (0) |
| 1.3.6.1.4.1.231.7.2.9.5.12 | Scalarh150etypeOfLastCdrNotificationTrap | read-only | current | Type of last CDR notification trap sent by the the device: (1) : error - CDR buffer overflow (2) : warning - CDR buffer is filled up over 80% (3) : notificatio… |
| 1.3.6.1.4.1.231.7.2.9.5.13 | Scalarh150eDescriptionOfLastCdrNotificationTrap | read-only | current | Textual description of last CDR notification trap sent by the device |
| 1.3.6.1.4.1.231.7.2.9.6 | Nodeh150eTrapSpecifications | |||
| 1.3.6.1.4.1.231.7.2.9.6.1 | NotificationsendAlarm | current | If an error occurs, there will be checked if the errorClass is configured to trigger an immediate signalling. If so, a trap will be send to the management stat… | |
| 1.3.6.1.4.1.231.7.2.9.6.2 | NotificationsendCdrNotification | current | The CDR notification trap is sent to trigger further actions by the management station, for instance download of CDR data. | |
| 1.3.6.1.4.1.231.7.2.9.6.3 | NotificationsendPortStatusNotification | current | The 'port status change' notification trap is sent to trigger a polling of the port table by a management station. It indicates one or more changes in port sta… | |
| 1.3.6.1.4.1.231.7.2.9.6.4 | NotificationsendUmRelatedChangeNotification | current | This trap is sent (to UM proxy), as the system detects changes. | |
| 1.3.6.1.4.1.231.7.2.9.8 | NodeumProxyGroup | |||
| 1.3.6.1.4.1.231.7.2.9.8.1 | ScalarumNodeNumber | read-only | current | The node number of the system. Unique number identifying the PBX. |
| 1.3.6.1.4.1.231.7.2.9.8.2 | ScalarumSrsEnabled | read-only | current | Indicates whether the SRS feature flag of the machine is enabled or not. The small remote site flag is an overall flag of the system. |
| 1.3.6.1.4.1.231.7.2.9.8.3 | ScalarumDefaultLanguage | read-only | current | Default language |
| 1.3.6.1.4.1.231.7.2.9.8.4 | ScalarumNumberOfSubscriberEntries | read-only | current | Number of entries in subscriber table. |
| 1.3.6.1.4.1.231.7.2.9.8.5 | TableumSubscriberTable | not-accessible | current | This table contains information about all HFA-Clients available for UM-configuration. |
| 1.3.6.1.4.1.231.7.2.9.8.5.1 | RowumSubscriberTableEntry | not-accessible | current | The UM-subscriber table entries. |
| 1.3.6.1.4.1.231.7.2.9.8.5.1.1 | ColumnumLogicalPortNumber | read-only | current | The logical port number of the subscriber. |
| 1.3.6.1.4.1.231.7.2.9.8.5.1.2 | ColumnumInternalCallNumber | read-only | current | The internal call number of the subscriber. |
| 1.3.6.1.4.1.231.7.2.9.8.5.1.3 | ColumnumDIDNumber | read-only | current | The DID number of the subscriber. |
| 1.3.6.1.4.1.231.7.2.9.8.5.1.4 | ColumnumE164Number | read-only | current | The E.164 call number of the subscriber. |
| 1.3.6.1.4.1.231.7.2.9.8.5.1.5 | ColumnumDisplayName | read-only | current | The display name of the subscriber. |
| 1.3.6.1.4.1.231.7.2.9.8.5.1.6 | ColumnumStationType | read-only | current | The type of the station. e.g. UP0, S0, HFA, ... |
| 1.3.6.1.4.1.231.7.2.9.8.5.1.7 | ColumnumPortStatus | read-only | current | The status of the logical port. |
| 1.3.6.1.4.1.231.7.2.9.8.5.1.8 | ColumnumClassOfService | read-only | current | Classes of service can be used to restrict external calls. The types of calls that can be made from each station are defined for this purpose. |
| 1.3.6.1.4.1.231.7.2.9.8.5.1.9 | ColumnumDisplayLanguage | read-only | current | Display language |
| 1.3.6.1.4.1.231.7.2.9.8.5.1.10 | ColumnumCfssTarget | read-only | current | The target for Call Forwarding for Station out of Service. |
| 1.3.6.1.4.1.231.7.2.9.8.6 | ScalarumNumberOfUnconfirmedTraps | read-only | current | Number of entries in the umUnconfirmedTrapTable. A trap is confirmed and as result removed from the table, when its entry in the table is requested in a GetReq… |
| 1.3.6.1.4.1.231.7.2.9.8.7 | TableumUnconfirmedTrapTable | not-accessible | current | This table contains information about traps sent to UM-Proxy. The contained traps have not yet been confirmed. |
| 1.3.6.1.4.1.231.7.2.9.8.7.1 | RowumUnconfirmedTrapTableEntry | not-accessible | current | The unconfirmed traps table entries. |
| 1.3.6.1.4.1.231.7.2.9.8.7.1.1 | ColumnumTrapIdentifier | read-only | current | Unique identifier of the trap. A SetRequest with value 0 removes the entry from the table. A value unequal to 0 is erroneous. |
| 1.3.6.1.4.1.231.7.2.9.8.7.1.2 | ColumnumTrapType | read-only | current | The type of trap sent. Startup traps are sent as the system resets. The 2 types of modify traps aim on distinguishing between modification that are subscriber-… |
| 1.3.6.1.4.1.231.7.2.9.8.7.1.3 | ColumnumTrapLogicalPortNumber | read-only | current | In case of a modifySubscriber-type trap, the logical port number that was the reason for the traps is presented here. For the other umTrapTypes, the content is… |
| 1.3.6.1.4.1.231.7.2.9.8.8 | ScalarumNetworkElementKey | read-only | current | A key that uniquely identifies the node towards UM. For a HiPath 3000/5000 this would be the IP-address, A simulator should additionally provide the port. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DateAndTime | OCTET STRING (SIZE (8)) | current | A date-time specification identical to rfc 1443 definition. field octets contents range 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 d… |
| DisplayString | OCTET STRING | ||
| ReadWrite | INTEGER { readWrite(1), readOnly(2) } | current | A textual convention for describing objects that enable or disable some sort of write access. |