HCP-MIB
405 objects
The MIB module for managing HCP.
Imported Objects
| INET-ADDRESS-MIB | InetAddressIPv6 |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.116 | Nodehitachi | |||
| 1.3.6.1.4.1.116.5 | NodesystemExMib | |||
| 1.3.6.1.4.1.116.5.46 | Nodehcp | |||
| 1.3.6.1.4.1.116.5.46.0 | NodehcpNotifications | |||
| 1.3.6.1.4.1.116.5.46.0.1 | NotificationhcpAdminLogEvent | current | The indicated event message was written to the HCP system log. | |
| 1.3.6.1.4.1.116.5.46.0.1.1 | NodehcpAdminEvent | |||
| 1.3.6.1.4.1.116.5.46.0.1.1.1 | ScalarhcpAdminLogEventSeverity | read-only | current | Severity of the event. |
| 1.3.6.1.4.1.116.5.46.0.1.1.2 | ScalarhcpAdminLogEventTimestamp | read-only | current | Date and time at which the event occurred. |
| 1.3.6.1.4.1.116.5.46.0.1.1.3 | ScalarhcpAdminLogEventType | read-only | current | Event ID. |
| 1.3.6.1.4.1.116.5.46.0.1.1.4 | ScalarhcpAdminLogEventShortName | read-only | current | Short description of the event. |
| 1.3.6.1.4.1.116.5.46.0.1.1.5 | ScalarhcpAdminLogEventMessage | read-only | current | Full text of the message about the event. |
| 1.3.6.1.4.1.116.5.46.0.1.1.6 | ScalarhcpAdminLogEventNodeHostname | read-only | current | Hostname of the node reporting. |
| 1.3.6.1.4.1.116.5.46.1 | NodehcpNodes | |||
| 1.3.6.1.4.1.116.5.46.1.1 | TablehcpNodeTable | not-accessible | current | Table of nodes in the HCP system. |
| 1.3.6.1.4.1.116.5.46.1.1.1 | RowhcpNodeTableEntry | not-accessible | current | Information about each node. |
| 1.3.6.1.4.1.116.5.46.1.1.1.1 | ColumnnodeNumber | not-accessible | current | Permanent ID for the node. (System Management Console: Hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.2 | ColumnnodeIP | read-only | current | IP address of the node. (System Management Console: Hardware > [nodeNumber] > Core hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.3 | ColumnnodeUsage | read-only | current | Total amount of used space on all the logical volumes managed by the node, in bytes. (System Management Console: Hardware > [nodeNumber] > Logical volume usage) |
| 1.3.6.1.4.1.116.5.46.1.1.1.4 | ColumnnodeAvailability | read-only | current | Total amount of unused space on all the logical volumes managed by the node, in bytes. |
| 1.3.6.1.4.1.116.5.46.1.1.1.5 | ColumnnodeCapacity | read-only | current | Total amount of storage space on all the logical volumes managed by the node, in bytes. (System Management Console: Hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.6 | ColumnnodeBootTime | read-only | current | Date and time the node last started. (System Management Console: Hardware > [nodeNumber] > Core hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.7 | ColumnnodeStatus | read-only | current | Current status of the node. (System Management Console: Hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.8 | ColumnnodeRestart | read-write | current | Restarts the node when set to any non-zero value. (System Management Console: Hardware > [nodeNumber] > Restart Node) |
| 1.3.6.1.4.1.116.5.46.1.1.1.9 | ColumnnodeShutdown | read-write | current | Shuts down the node when set to any non-zero value. (System Management Console: Hardware > [nodeNumber] > Shut Down Node) |
| 1.3.6.1.4.1.116.5.46.1.1.1.10 | ColumnnodeType | read-only | current | Type of node: storage (1). (System Management Console: Hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.11 | ColumnnodeNicFailure | read-only | current | Indication of whether (1) or not (2) the node has a failed NIC. (System Management Console: Hardware > [nodeNumber] > Network interfaces) |
| 1.3.6.1.4.1.116.5.46.1.1.1.12 | ColumnnodeSANStatus | read-only | current | Indication of the status of the SAN path. (System Management Console: Hardware > [nodeNumber] > Multipath) |
| 1.3.6.1.4.1.116.5.46.1.1.1.13 | ColumnnodeHardwareType | read-only | current | Type of hardware used for the node. (System Management Console: Hardware > [nodeNumber] > Core Hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.14 | ColumnnodeNicDegraded | read-only | current | Indication of whether (1) or not (2) the node has a degraded NIC. (System Management Console: Hardware > [nodeNumber] > Network interfaces) |
| 1.3.6.1.4.1.116.5.46.1.1.1.15 | ColumnnodeDateTime | read-only | current | Date and time the node last started plus the amount of time the node has been running, as reported by the node. (System Management Console: Hardware > [nodeNum… |
| 1.3.6.1.4.1.116.5.46.1.1.1.16 | ColumnnodeTimeSource | read-only | current | Indication of the source of time for the node |
| 1.3.6.1.4.1.116.5.46.1.1.1.17 | ColumnnodeIPv6 | read-only | current | IPv6 address of the node. (System Management Console: Hardware > [nodeNumber] > Core hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.18 | ColumnnodeIPv6Sec | read-only | current | IPv6 Secondary address of the node. (System Management Console: Hardware > [nodeNumber] > Core hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.19 | ColumnnodeModel | read-only | current | The model type of the node. (System Management Console: Hardware > [nodeNumber] > Model) |
| 1.3.6.1.4.1.116.5.46.1.1.1.20 | ColumnnodeMemoryTotal | read-only | current | Total amount of memory on the node, in bytes. (System Management Console: Hardware > [nodeNumber] > Core Hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.21 | ColumnnodeMgmtIP | read-only | current | IPv4 address of Management Network for the node. (System Management Console: Hardware > [nodeNumber] > Core hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.22 | ColumnnodeMgmtIPv6 | read-only | current | IPv6 address of Management network for the node. (System Management Console: Hardware > [nodeNumber] > Core hardware) |
| 1.3.6.1.4.1.116.5.46.1.1.1.23 | ColumnnodeMgmtIPv6Sec | read-only | current | IPv6 secondary address of Management network for the node. (System Management Console: Hardware > [nodeNumber] > Core hardware) |
| 1.3.6.1.4.1.116.5.46.1.2 | TablehcpIpmiTemperatureNodeTable | not-accessible | current | Table of IPMI temperature readings for each node in the HCP system. |
| 1.3.6.1.4.1.116.5.46.1.2.1 | RowhcpIpmiTemperatureNodeTableEntry | not-accessible | current | IPMI temperature reading for a device in a node. |
| 1.3.6.1.4.1.116.5.46.1.2.1.1 | ColumnipmiTemperatureName | read-only | current | Name of the device whose IPMI temperature reading is being reported. (System Management Console: Hardware > [nodeNumber] > IPMI) |
| 1.3.6.1.4.1.116.5.46.1.2.1.2 | ColumnipmiTemperatureDetailedStatus | read-only | current | IPMI temperature reading for the device. (System Management Console: Hardware > [nodeNumber] > IPMI) |
| 1.3.6.1.4.1.116.5.46.1.3 | TablehcpIpmiPowerSupplyNodeTable | not-accessible | current | Table of IPMI power supply readings for each node in the HCP system. |
| 1.3.6.1.4.1.116.5.46.1.3.1 | RowhcpIpmiPowerSupplyNodeTableEntry | not-accessible | current | IPMI reading for a power supply in a node. |
| 1.3.6.1.4.1.116.5.46.1.3.1.1 | ColumnipmiPowerSupplyName | read-only | current | Name of the power supply whose IPMI reading is being reported. (System Management Console: Hardware > [nodeNumber] > IPMI) |
| 1.3.6.1.4.1.116.5.46.1.3.1.2 | ColumnipmiPowerSupplyDetailedStatus | read-only | current | IPMI reading for the power supply. (System Management Console: Hardware > [nodeNumber] > IPMI) |
| 1.3.6.1.4.1.116.5.46.1.4 | TablehcpIpmiFanNodeTable | not-accessible | current | Table of IPMI fan readings for each node in the HCP system. |
| 1.3.6.1.4.1.116.5.46.1.4.1 | RowhcpIpmiFanNodeTableEntry | not-accessible | current | IPMI reading for a fan in a node. |
| 1.3.6.1.4.1.116.5.46.1.4.1.1 | ColumnipmiFanName | read-only | current | Name of the fan whose IPMI reading is being reported. (System Management Console: Hardware > [nodeNumber] > IPMI) |
| 1.3.6.1.4.1.116.5.46.1.4.1.2 | ColumnipmiFanDetailedStatus | read-only | current | IPMI reading for the fan. (System Management Console: Hardware > [nodeNumber] > IPMI) |
| 1.3.6.1.4.1.116.5.46.1.5 | TablehcpIpmiProcessorNodeTable | not-accessible | current | Table of IPMI processor readings for each node in the HCP system. |
| 1.3.6.1.4.1.116.5.46.1.5.1 | RowhcpIpmiProcessorNodeTableEntry | not-accessible | current | IPMI reading for a processor in a node. |
| 1.3.6.1.4.1.116.5.46.1.5.1.1 | ColumnipmiProcessorName | read-only | current | Name of the processor whose IPMI reading is being reported. (System Management Console: Hardware > [nodeNumber] > IPMI) |
| 1.3.6.1.4.1.116.5.46.1.5.1.2 | ColumnipmiProcessorDetailedStatus | read-only | current | IPMI reading for the processor. (System Management Console: Hardware > [nodeNumber] > IPMI) |
| 1.3.6.1.4.1.116.5.46.1.6 | TablehcpIpmiVoltageNodeTable | not-accessible | current | Table of IPMI voltage readings for each node in the HCP system. |
| 1.3.6.1.4.1.116.5.46.1.6.1 | RowhcpIpmiVoltageNodeTableEntry | not-accessible | current | IPMI voltage readings for a node. |
| 1.3.6.1.4.1.116.5.46.1.6.1.1 | ColumnipmiVoltageName | read-only | current | Name of the device whose IPMI voltage reading is being reported. (System Management Console: Hardware > [nodeNumber] > IPMI) |
| 1.3.6.1.4.1.116.5.46.1.6.1.2 | ColumnipmiVoltageDetailedStatus | read-only | current | IPMI voltage reading for the device. (System Management Console: Hardware > [nodeNumber] > IPMI) |
| 1.3.6.1.4.1.116.5.46.1.7 | TablehcpBBUNodeTable | not-accessible | current | Table of BBU readings for each node in the HCP system. |
| 1.3.6.1.4.1.116.5.46.1.7.1 | RowhcpBBUNodeTableEntry | not-accessible | current | Sensor reading for a BBU in a node. |
| 1.3.6.1.4.1.116.5.46.1.7.1.1 | ColumnbbuBroken | read-only | current | Sensor reading for broken BBU. (System Management Console: Hardware > [nodeNumber] > Hardware Status) |
| 1.3.6.1.4.1.116.5.46.1.7.1.2 | ColumnbbuDiagnostics | read-only | current | Sensor reading for BBU during diagnostics. (System Management Console: Hardware > [nodeNumber] > Hardware Status) |
| 1.3.6.1.4.1.116.5.46.1.7.1.3 | ColumnbbuChargeStatus | read-only | current | Sensor reading for BBU charge status. (System Management Console: Hardware > [nodeNumber] > Hardware Status) |
| 1.3.6.1.4.1.116.5.46.1.7.1.4 | ColumnbbuDegraded | read-only | current | Sensor reading for degraded BBU. (System Management Console: Hardware > [nodeNumber] > Hardware Status) |
| 1.3.6.1.4.1.116.5.46.1.7.1.5 | ColumnbbuType | read-only | current | BBU type. (System Management Console: Hardware > [nodeNumber] > Hardware Status) |
| 1.3.6.1.4.1.116.5.46.1.8 | TablehcpADNodeTable | not-accessible | current | Table of Active Directory status readings for each node in the HCP system. |
| 1.3.6.1.4.1.116.5.46.1.8.1 | RowhcpADNodeTableEntry | not-accessible | current | Active Directory status readings for a node. |
| 1.3.6.1.4.1.116.5.46.1.8.1.1 | ColumnadAccount | read-only | current | Indication of whether (1) or not (2) an account for the node exists in Active Directory. (System Management Console: Security > Active Directory > Status) |
| 1.3.6.1.4.1.116.5.46.1.8.1.2 | ColumnadCredentials | read-only | current | Indication of whether (1) or not (2) the Active Directory credentials on the node are valid. (System Management Console: Security > Active Directory > Status) |
| 1.3.6.1.4.1.116.5.46.1.8.1.3 | ColumnadConnectivity | read-only | current | Indication of whether (1) or not (2) the node can connect to Active Directory. (System Management Console: Security > Active Directory > Status) |
| 1.3.6.1.4.1.116.5.46.1.8.1.4 | ColumnadDisrupted | read-only | current | Indication of whether (1) or not (2) the last communication between the node and Active Directory was disrupted. (System Management Console: Security > Active … |
| 1.3.6.1.4.1.116.5.46.1.8.1.5 | ColumnadSSLConnection | read-only | current | Indication of whether (1) or not (2) the SSL connection between the node and Active Directory is functioning correctly. (System Management Console: Security > … |
| 1.3.6.1.4.1.116.5.46.1.9 | TablehcpSsdNodeTable | not-accessible | current | Table of SSDs in the HCP system nodes. |
| 1.3.6.1.4.1.116.5.46.1.9.1 | RowhcpSsdNodeTableEntry | not-accessible | current | Information about each SSD. |
| 1.3.6.1.4.1.116.5.46.1.9.1.1 | ColumnssdNodeNumber | read-only | current | ID of the node that contains the SSD. (System Management Console: Hardware) |
| 1.3.6.1.4.1.116.5.46.1.9.1.2 | ColumnssdEnclosure | read-only | current | Name of the enclosure that contains the SSD. (System Management Console: Hardware > [nodeNumber] > File systems on storage devices) |
| 1.3.6.1.4.1.116.5.46.1.9.1.3 | ColumnssdSlot | read-only | current | Number of the slot that contains the SSD. (System Management Console: Hardware > [nodeNumber] > File systems on storage devices) |
| 1.3.6.1.4.1.116.5.46.1.9.1.4 | ColumnssdModel | read-only | current | Vendor model of the SSD. |
| 1.3.6.1.4.1.116.5.46.1.9.1.5 | ColumnssdStatus | read-only | current | Current status of the SSD. (System Management Console: Hardware > [nodeNumber] > File systems on storage devices) |
| 1.3.6.1.4.1.116.5.46.1.9.1.6 | ColumnssdWear | read-only | current | Estimated remaining life span for the SSD. (System Management Console: Hardware > [nodeNumber] > File systems on storage devices) |
| 1.3.6.1.4.1.116.5.46.1.9.1.7 | ColumnssdThreshold | read-only | current | Vendor-specified threshold for SSD life span warnings. |
| 1.3.6.1.4.1.116.5.46.1.9.1.8 | ColumnssdConfigThreshold | read-only | current | Configured threshold for SSD life span warnings. |
| 1.3.6.1.4.1.116.5.46.1.9.1.9 | ColumnssdHealth | read-only | current | Current health of the SSD based on estimated remaining life span. |
| 1.3.6.1.4.1.116.5.46.2 | NodehcpStorage | |||
| 1.3.6.1.4.1.116.5.46.2.1 | TablehcpStorageTable | not-accessible | current | Table of logical volumes in the HCP system. |
| 1.3.6.1.4.1.116.5.46.2.1.1 | RowhcpStorageTableEntry | not-accessible | current | Information about each logical volume. |
| 1.3.6.1.4.1.116.5.46.2.1.1.1 | ColumnstorageTableIndex | not-accessible | current | Index into hcpStorageTable. |
| 1.3.6.1.4.1.116.5.46.2.1.1.2 | ColumnstorageNodeNumber | read-only | current | ID of the node currently managing the logical volume. (System Management Console: Node Status) |
| 1.3.6.1.4.1.116.5.46.2.1.1.3 | ColumnstorageUsage | read-only | current | Amount of used space on the logical volume, in bytes. (System Management Console: Hardware > [nodeNumber] > Logical volume usage) |
| 1.3.6.1.4.1.116.5.46.2.1.1.4 | ColumnstorageAvailability | read-only | current | Amount of unused space on the logical volume, in bytes. |
| 1.3.6.1.4.1.116.5.46.2.1.1.5 | ColumnstorageCapacity | read-only | current | Total amount of space on the logical volume, in bytes. (System Management Console: Hardware > [nodeNumber] > Logical volume usage) |
| 1.3.6.1.4.1.116.5.46.2.1.1.6 | ColumnstorageChannelUnit | read-only | current | Logical volume label ('Volume 1', 'Volume 2', etc.). (System Management Console: Hardware > [nodeNumber] > Logical volume usage) |
| 1.3.6.1.4.1.116.5.46.2.1.1.7 | ColumnstorageStatus | read-only | current | Current status of the logical volume. (System Management Console: Hardware > [nodeNumber] > Logical volume usage) |
| 1.3.6.1.4.1.116.5.46.2.1.1.8 | ColumnvolumeFeaturesValue | read-only | current | A combination of all the flags enabled for this volume: 0x00000000 - None 0x00000001 - Primary ZCF 0x00000002 - Standby ZCF 0x00000004 - Encrypted 0x00000008 -… |
| 1.3.6.1.4.1.116.5.46.2.1.1.9 | ColumnvolumeFeaturesCsv | read-only | current | A CSV list of volume features. (System Management Console: Hardware > [nodeNumber] > Logical Volumes) |
| 1.3.6.1.4.1.116.5.46.2.1.1.10 | ColumnvolumeSpinStateValue | read-only | current | An integer representing the volume spin state: 0x00000000 - Unknown 0x00000001 - Spinup requested 0x00000002 - Spinup wait 0x00000004 - Spinup error 0x00000008… |
| 1.3.6.1.4.1.116.5.46.2.1.1.11 | ColumnvolumeSpinStateString | read-only | current | The effective volume spin state. (System Management Console: Hardware > [nodeNumber] > Logical Volumes) |
| 1.3.6.1.4.1.116.5.46.2.2 | TablehcpStorageComponentTable | not-accessible | current | Table of storage components in the HCP system. (System Management Console: Storage > Components) |
| 1.3.6.1.4.1.116.5.46.2.2.1 | RowhcpStorageComponentTableEntry | not-accessible | current | Information about storage components. (System Management Console: Storage > Components) |
| 1.3.6.1.4.1.116.5.46.2.2.1.1 | ColumnstorageComponentIndex | not-accessible | current | Index into hcpStorageComponentTable. |
| 1.3.6.1.4.1.116.5.46.2.2.1.2 | ColumnstorageComponentName | read-only | current | Name of storage component. (System Management Console: Storage > Components) |
| 1.3.6.1.4.1.116.5.46.2.2.1.3 | ColumnstorageComponentType | read-only | current | Type of storage component. (System Management Console: Storage > Components) |
| 1.3.6.1.4.1.116.5.46.2.2.1.4 | ColumnstorageComponentStatus | read-only | current | Status of storage component. (System Management Console: Storage > Components) |
| 1.3.6.1.4.1.116.5.46.2.3 | TablehcpStoragePoolTable | not-accessible | current | Table of storage pools in the HCP system. (System Management Console: Storage > Pools) |
| 1.3.6.1.4.1.116.5.46.2.3.1 | RowhcpStoragePoolTableEntry | not-accessible | current | Information about storage pools. (System Management Console: Storage > Pools) |
| 1.3.6.1.4.1.116.5.46.2.3.1.1 | ColumnstoragePoolIndex | not-accessible | current | Index into hcpStoragePoolTable. |
| 1.3.6.1.4.1.116.5.46.2.3.1.2 | ColumnstoragePoolName | read-only | current | Name of storage pool. (System Management Console: Storage > Pools) |
| 1.3.6.1.4.1.116.5.46.2.3.1.3 | ColumnstoragePoolType | read-only | current | Type of storage pool ('Primary', 'NFS', 'S3 Compatible', etc.). (System Management Console: Storage > Pools) |
| 1.3.6.1.4.1.116.5.46.2.3.1.4 | ColumnstoragePoolStatus | read-only | current | Status of storage pool. (System Management Console: Storage > Pools) |
| 1.3.6.1.4.1.116.5.46.2.3.1.5 | ColumnstoragePoolCompression | read-only | current | Compress Data At Rest setting for the pool. (System Management Console: Storage > Pools) |
| 1.3.6.1.4.1.116.5.46.2.3.1.6 | ColumnstoragePoolEncryption | read-only | current | Encrypt Data At Rest setting for the pool. (System Management Console: Storage > Pools) |
| 1.3.6.1.4.1.116.5.46.2.3.1.7 | ColumnstoragePoolContentVerification | read-only | current | Content Verification setting for the pool. (System Management Console: Storage > Pools) |
| 1.3.6.1.4.1.116.5.46.2.4 | ScalarservicePlanCount | read-only | current | Number of service plans in the system. (System Management Console: Storage > Service Plans) |
| 1.3.6.1.4.1.116.5.46.2.5 | NodestorageLicense | |||
| 1.3.6.1.4.1.116.5.46.2.5.1 | ScalarstorageLicenseExpirationDate | read-only | current | Date and time when the current storage license will expire. (System Management Console: Storage > Licenses) |
| 1.3.6.1.4.1.116.5.46.2.5.2 | ScalarstorageActiveUsedCapacity | read-only | current | Total space used on active storage. |
| 1.3.6.1.4.1.116.5.46.2.5.3 | ScalarstorageActiveLicensedCapacity | read-only | current | Licensed capacity for active storage. (System Management Console: Storage > Licenses) |
| 1.3.6.1.4.1.116.5.46.2.5.4 | ScalarstorageExtendedUsedCapacity | read-only | current | Total space used on extended storage. |
| 1.3.6.1.4.1.116.5.46.2.5.5 | ScalarstorageExtendedLicensedCapacity | read-only | current | Licensed capacity for extended storage. (System Management Console: Storage > Licenses) |
| 1.3.6.1.4.1.116.5.46.2.5.6 | ScalarstorageLicenseSerialNumber | read-only | current | Licensed serial number. |
| 1.3.6.1.4.1.116.5.46.2.5.7 | ScalarstorageUsedCapacity | read-only | current | Total space used between HCP and HCP S-node storage. |
| 1.3.6.1.4.1.116.5.46.2.5.8 | ScalarstorageLicensedCapacity | read-only | current | Licensed capacity for HCP and HCP S-node storage. (System Management Console: Storage > Licenses) |
| 1.3.6.1.4.1.116.5.46.2.5.9 | ScalarstorageLicensePremiumEnabled | read-only | current | Indication of whether (1) or not (2) HCP is licensed for premium features. |
| 1.3.6.1.4.1.116.5.46.3 | NodehcpSystem | |||
| 1.3.6.1.4.1.116.5.46.3.1 | Scalarrestart | read-write | current | Restarts HCP when set to any non-zero value. (System Management Console: Hardware > Restart System) |
| 1.3.6.1.4.1.116.5.46.3.2 | Scalarshutdown | read-write | current | Shuts down HCP when set to any non-zero value. (System Management Console: Hardware > Shut Down System) |
| 1.3.6.1.4.1.116.5.46.4 | NodehcpTenants | |||
| 1.3.6.1.4.1.116.5.46.4.1 | TablehcpTenantTable | not-accessible | current | Table of tenants in the HCP system. |
| 1.3.6.1.4.1.116.5.46.4.1.1 | RowhcpTenantTableEntry | not-accessible | current | Information about each tenant. |
| 1.3.6.1.4.1.116.5.46.4.1.1.1 | ColumntenantIndex | not-accessible | current | Index into hcpTenantTable. |
| 1.3.6.1.4.1.116.5.46.4.1.1.2 | ColumntenantName | read-only | current | Tenant name. (System Management Console: Tenants > [tenantName] > Settings) |
| 1.3.6.1.4.1.116.5.46.4.1.1.3 | ColumntenantDescription | read-only | current | Tenant description. (System Management Console: Tenants > [tenantName] > Settings) |
| 1.3.6.1.4.1.116.5.46.4.1.1.4 | ColumntenantContactFirstName | read-only | current | First name of tenant contact. (System Management Console: Tenants > [tenantName] > Settings > Contact Information) |
| 1.3.6.1.4.1.116.5.46.4.1.1.5 | ColumntenantContactLastName | read-only | current | Last name of tenant contact. (System Management Console: Tenants > [tenantName] > Settings > Contact Information) |
| 1.3.6.1.4.1.116.5.46.4.1.1.6 | ColumntenantAddressLineOne | read-only | current | First line of tenant contact address. (System Management Console: Tenants > [tenantName] > Settings > Contact Information) |
| 1.3.6.1.4.1.116.5.46.4.1.1.7 | ColumntenantAddressLineTwo | read-only | current | Second line of tenant contact address. (System Management Console: Tenants > [tenantName] > Settings > Contact Information) |
| 1.3.6.1.4.1.116.5.46.4.1.1.8 | ColumntenantAddressCity | read-only | current | Tenant contact city. (System Management Console: Tenants > [tenantName] > Settings > Contact Information) |
| 1.3.6.1.4.1.116.5.46.4.1.1.9 | ColumntenantAddressStateProvince | read-only | current | Tenant contact state or province. (System Management Console: Tenants > [tenantName] > Settings > Contact Information) |
| 1.3.6.1.4.1.116.5.46.4.1.1.10 | ColumntenantAddressZipPostalCode | read-only | current | Tenant contact zip or postal code. (System Management Console: Tenants > [tenantName] > Settings > Contact Information) |
| 1.3.6.1.4.1.116.5.46.4.1.1.11 | ColumntenantAddressCountry | read-only | current | Tenant contact country. (System Management Console: Tenants > [tenantName] > Settings > Contact Information) |
| 1.3.6.1.4.1.116.5.46.4.1.1.12 | ColumntenantPhone | read-only | current | Tenant contact telephone number. (System Management Console: Tenants > [tenantName] > Settings > Contact Information) |
| 1.3.6.1.4.1.116.5.46.4.1.1.13 | ColumntenantPhoneExtension | read-only | current | Tenant contact telephone number extension. (System Management Console: Tenants > [tenantName] > Settings > Contact Information) |
| 1.3.6.1.4.1.116.5.46.4.1.1.14 | ColumntenantEmailAddress | read-only | current | Tenant contact email address. (System Management Console: Tenants > [tenantName] > Settings > Contact Information) |
| 1.3.6.1.4.1.116.5.46.4.1.1.15 | ColumntenantAllowSearch | read-only | current | Indication of whether (1) or not (2) the tenant has the search feature and can enable search for its namespaces. (System Management Console: Tenants > [tenantN… |
| 1.3.6.1.4.1.116.5.46.4.1.1.16 | ColumntenantAllowVersioning | read-only | current | Indication of whether (1) or not (2) the tenant has the object versioning feature and can enable versioning for its namespaces. (System Management Console: Ten… |
| 1.3.6.1.4.1.116.5.46.4.1.1.17 | ColumntenantAllowRetentionModeSelection | read-only | current | Indication of whether (1) or not (2) the tenant has the ability to select the retention mode for its namespaces. (System Management Console: Tenants > [tenantN… |
| 1.3.6.1.4.1.116.5.46.4.1.1.18 | ColumntenantAllowReplication | read-only | current | Indication of whether (1) or not (2) the tenant can be replicated. (System Management Console: Tenants > [tenantName] > Settings) |
| 1.3.6.1.4.1.116.5.46.4.1.1.19 | ColumntenantObjectsStored | read-only | current | Number of objects currently stored in all namespaces owned by the tenant. (System Management Console: Tenants > [tenantName] > Overview) |
| 1.3.6.1.4.1.116.5.46.4.1.1.20 | ColumntenantObjectsIndexed | read-only | current | Number of indexed objects currently stored in all namespaces owned by the tenant. (System Management Console: Tenants > [tenantName] > Overview) |
| 1.3.6.1.4.1.116.5.46.4.1.1.21 | ColumntenantHardQuota | read-only | current | Hard quota for the tenant. (System Management Console: Tenants > [tenantName] > Settings) |
| 1.3.6.1.4.1.116.5.46.4.1.1.22 | ColumntenantSoftQuota | read-only | current | Soft quota for the tenant. (System Management Console: Tenants > [tenantName] > Settings) |
| 1.3.6.1.4.1.116.5.46.4.1.1.23 | ColumntenantAllocatedQuota | read-only | current | Total amount of storage, in bytes, that the tenant has allocated to its namespaces. (System Management Console: Tenants > [tenantName] > Overview) |
| 1.3.6.1.4.1.116.5.46.4.1.1.24 | ColumntenantPhysicalBytesUsed | read-only | current | Total amount of storage, in bytes, used by all the namespaces owned by the tenant to store object data and metadata. (System Management Console: Tenants) |
| 1.3.6.1.4.1.116.5.46.4.1.1.25 | ColumntenantLogicalBytesUsed | read-only | current | Total size, in bytes, of the stored data and custom metadata before it was added to the namespaces owned by the tenant. |
| 1.3.6.1.4.1.116.5.46.4.1.1.26 | ColumnnonReplicatedDpl1Namespace | read-only | current | An indication of whether (1) or not (2) the tenant owns any non-replicated namespaces with a DPL that is considered unsafe for the HCP system hardware configur… |
| 1.3.6.1.4.1.116.5.46.4.1.1.27 | ColumntenantNamespaceQuota | read-only | current | Namespace quota for the tenant, if set, or 'No Quota' if not set. (System Management Console: Tenants > [tenantName] > Overview) |
| 1.3.6.1.4.1.116.5.46.4.1.1.28 | ColumntenantAuthentication | read-only | current | CSV list of the authentication types enabled for this tenant. (System Management Console: Tenants > [tenantName] > Overview) |
| 1.3.6.1.4.1.116.5.46.4.1.1.29 | ColumntenantManagementNetwork | read-only | current | Management network for the tenant. (System Management Console: Tenants > [tenantName] > Settings) |
| 1.3.6.1.4.1.116.5.46.4.1.1.30 | ColumntenantDataNetwork | read-only | current | Data network for the tenant. (System Management Console: Tenants > [tenantName] > Settings) |
| 1.3.6.1.4.1.116.5.46.4.1.1.31 | ColumntenantErasureCoding | read-only | current | Indication of whether the tenant can select erasure coding for its namespaces. (System Management Console: Tenants > [tenantName] > Settings) |
| 1.3.6.1.4.1.116.5.46.5 | NodehcpServices | |||
| 1.3.6.1.4.1.116.5.46.5.1 | NodecapacityBalancing | |||
| 1.3.6.1.4.1.116.5.46.5.1.1 | NodecapacityBalancingStats | |||
| 1.3.6.1.4.1.116.5.46.5.1.1.1 | ScalarcapacityBalancingStatus | read-only | current | Current status of the capacity balancing service. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.1.1.2 | ScalarcapacityBalancingStatusTime | read-only | current | Date and time the capacity balancing service status was last updated. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.1.2 | NodecapacityBalancingSettings | |||
| 1.3.6.1.4.1.116.5.46.5.2 | Nodecompression | |||
| 1.3.6.1.4.1.116.5.46.5.2.1 | NodecompressionStats | |||
| 1.3.6.1.4.1.116.5.46.5.2.1.1 | ScalarcompressionStatus | read-only | current | Current status of the compression service. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.2.1.2 | ScalarcompressionStatusTime | read-only | current | Date and time the compression service status was last updated. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.2.1.3 | ScalarcompressionSpaceSaved | read-only | current | Number of bytes of storage freed by compressed objects and compressed parts of multipart objects. (System Management Console: Services > Compression) |
| 1.3.6.1.4.1.116.5.46.5.2.1.4 | ScalarcompressionPercentSpaceSaved | read-only | current | Amount of storage space currently saved by object and part compression, expressed as a percentage of the total space available for storing objects and parts of… |
| 1.3.6.1.4.1.116.5.46.5.2.1.5 | ScalarcompressionObjectsCompressed | read-only | current | Number of objects and parts of multipart objects currently compressed. (System Management Console: Services > Compression) |
| 1.3.6.1.4.1.116.5.46.5.2.2 | NodecompressionSettings | |||
| 1.3.6.1.4.1.116.5.46.5.2.2.1 | ScalarcompressionRate | read-write | deprecated | Rate at which HCP processes objects and parts of multipart objects for compression. (System Management Console: Services > Compression) |
| 1.3.6.1.4.1.116.5.46.5.2.2.2 | ScalarcompressionAfterDays | read-write | current | Number of days to wait before compressing an object or part of a multipart object. (System Management Console: Services > Compression) |
| 1.3.6.1.4.1.116.5.46.5.2.2.3 | ScalarcompressionMinSizeKB | read-write | current | Minimum size of objects and parts of multipart objects to compress. (System Management Console: Services > Compression) |
| 1.3.6.1.4.1.116.5.46.5.2.2.4 | ScalarcompressionExcludeList | read-only | current | Locations, names, and types of objects to be excluded from compression. (System Management Console: Services > Compression) |
| 1.3.6.1.4.1.116.5.46.5.3 | NodecontentVerification | |||
| 1.3.6.1.4.1.116.5.46.5.3.1 | NodecontentVerificationStats | |||
| 1.3.6.1.4.1.116.5.46.5.3.1.1 | ScalarcontentVerificationStatus | read-only | current | Current status of the content verification service. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.3.1.2 | ScalarcontentVerificationStatusTime | read-only | current | Date and time the content verification service status was last updated. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.3.2 | NodecontentVerificationSettings | |||
| 1.3.6.1.4.1.116.5.46.5.3.2.1 | ScalarcontentVerificationRepairMode | read-write | current | Sets or gets the content verification mode: (1) - checks all objects and parts of multipart uploads and multipart objects, repairs if needed (2) - checks only … |
| 1.3.6.1.4.1.116.5.46.5.3.2.2 | ScalaridentifyUnavailableObjectsDpl1UnavailableNode | read-write | deprecated | This setting indicates whether the runtime system should identify unavailable objects where DPL=1 and the node is unavailable: (1) - identify (2) - don't ident… |
| 1.3.6.1.4.1.116.5.46.5.4 | NodeduplicateElimination | |||
| 1.3.6.1.4.1.116.5.46.5.4.1 | NodeduplicateEliminationStats | |||
| 1.3.6.1.4.1.116.5.46.5.4.1.1 | ScalarduplicateEliminationStatus | read-only | current | Current status of the duplicate elimination service. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.4.1.2 | ScalarduplicateEliminationStatusTime | read-only | current | Date and time the duplicate elimination service status was last updated. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.4.1.3 | ScalarduplicateEliminationNumObjectsMerged | read-only | current | Total number of objects and parts of multipart objects for which data was merged since HCP was installed. (System Management Console: Services > Duplicate Elim… |
| 1.3.6.1.4.1.116.5.46.5.4.1.4 | ScalarduplicateEliminationNumBytesSaved | read-only | current | Total number of bytes of storage freed due to duplicate elimination since HCP was installed. (System Management Console: Services > Duplicate Elimination) |
| 1.3.6.1.4.1.116.5.46.5.4.2 | NodeduplicateEliminationSettings | |||
| 1.3.6.1.4.1.116.5.46.5.5 | NodegarbageCollection | |||
| 1.3.6.1.4.1.116.5.46.5.5.1 | NodegarbageCollectionStats | |||
| 1.3.6.1.4.1.116.5.46.5.5.1.1 | ScalargarbageCollectionStatus | read-only | current | Current status of the garbage collection service. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.5.1.2 | ScalargarbageCollectionStatusTime | read-only | current | Date and time the garbage collection service status was last updated. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.5.2 | NodegarbageCollectionSettings | |||
| 1.3.6.1.4.1.116.5.46.5.6 | Nodeprotection | |||
| 1.3.6.1.4.1.116.5.46.5.6.1 | NodeprotectionStats | |||
| 1.3.6.1.4.1.116.5.46.5.6.1.1 | ScalarprotectionStatus | read-only | current | Current status of the protection service. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.6.1.2 | ScalarprotectionStatusTime | read-only | current | Date and time the protection service status was last updated. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.6.2 | NodeprotectionSettings | |||
| 1.3.6.1.4.1.116.5.46.5.7 | Nodereplication | |||
| 1.3.6.1.4.1.116.5.46.5.7.1 | TablereplicationLinkTable | not-accessible | current | Table of replication links. |
| 1.3.6.1.4.1.116.5.46.5.7.1.1 | RowreplicationLinkTableEntry | not-accessible | current | Information about each replication link. |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.1 | ColumnreplicationLinkTableIndex | not-accessible | current | Index into replicationLinkTable. |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.2 | ColumnreplicationLinkName | read-only | current | Replication link name. (System Management Console: Services > Replication) |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.3 | ColumnreplicationLinkId | read-only | current | Replication link ID. |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.4 | ColumnreplicationLinkRemoteHostnames | read-only | current | DNS name of the other HCP system included in the replication link or a CSV list of the IP addresses of one or more nodes in that system. (System Management Con… |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.5 | ColumnreplicationLinkRemotePort | read-only | current | Replication port on the other HCP system included in the replication link. (System Management Console: Services > Replication > [linkName] > Configuration) |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.6 | ColumnreplicationLinkStatus | read-only | current | Status of the replication link. (System Management Console: Services > Replication) |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.7 | ColumnreplicationLinkAuthoritative | read-only | current | Indication of whether the HCP system is currently the source (1) or target (2) of replication activity on the replication link (that is, whether objects are be… |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.8 | ColumnreplicationLinkSuspended | read-write | current | Suspends (1) or resumes (2) the replication link. (System Management Console: Services > Replication > [linkName] > Management) |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.9 | ColumnreplicationLinkMaster | read-only | current | Indication of whether the HCP system is the primary system (1) or replica (2) for the replication link. |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.10 | ColumnreplicationLinkBacklogSeconds | read-only | current | Cached backlog time for the replication link, in seconds. This value is updated every 10 minutes. (System Management Console: Services > Replication > [linkNam… |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.11 | ColumnreplicationLinkBytes | read-only | current | Cached number of bytes transferred or received through the replication link in the last minute. This value is updated every 10 minutes. |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.12 | ColumnreplicationLinkBytesPerSecond | read-only | current | Cached data transmission rate for the replication link during the past minute, in bytes per second. This value is updated every 10 minutes. (System Management … |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.13 | ColumnreplicationLinkOperations | read-only | current | Cached number of replication operations performed on the replication link in the past minute. This value is updated every 10 minutes. |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.14 | ColumnreplicationLinkOperationsPerSecond | read-only | current | Cached operation rate for the replication link during the past minute, in operations per second. This value is updated every 10 minutes. (System Management Con… |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.15 | ColumnreplicationLinkErrors | read-only | current | Cached number of errors that have occurred on the replication link in the last minute. This value is updated every 10 minutes. |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.16 | ColumnreplicationLinkErrorsPerSecond | read-only | current | Cached number of errors that have occurred on the replication link during the past minute, in errors per second. This value is updated every 10 minutes. |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.17 | ColumnreplicationLinkObjectsToBeReplicated | read-only | current | Cached approximation of the number of objects and parts of multipart objects currently waiting to be replicated on the replication link. This value is updated … |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.18 | ColumnreplicationLinkBytesToBeReplicated | read-only | current | Cached approximation of the amount of data currently waiting to be replicated on the replication link, in bytes. This value is updated every 10 minutes. |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.19 | ColumnreplicationLinkNetwork | read-only | current | Network used for this replication link. (System Management Console: Services > Replication > Settings) |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.20 | ColumnreplicationLinkType | read-only | current | Indication of whether the replication link is active/passive or active/active. (System Management Console: Services > Replication) |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.21 | ColumnreplicationLinkVerificationMode | read-only | current | Current setting for replication verification on the HCP system. (System Management Console: Services > Replication > Settings) |
| 1.3.6.1.4.1.116.5.46.5.7.1.1.22 | ColumnreplicationLinkLastVerificationTime | read-only | current | The last time a verification pass completed for this replication link. (System Management Console: Services > Replication > [linkName] > Overview) |
| 1.3.6.1.4.1.116.5.46.5.8 | Nodescavenging | |||
| 1.3.6.1.4.1.116.5.46.5.8.1 | NodescavengingStats | |||
| 1.3.6.1.4.1.116.5.46.5.8.1.1 | ScalarscavengingStatus | read-only | current | Current status of the scavenging service. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.8.1.2 | ScalarscavengingStatusTime | read-only | current | Date and time the scavenging service status was last updated. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.8.2 | NodescavengingSettings | |||
| 1.3.6.1.4.1.116.5.46.5.9 | Nodesearch | |||
| 1.3.6.1.4.1.116.5.46.5.9.1 | NodesearchStats | |||
| 1.3.6.1.4.1.116.5.46.5.9.1.1 | ScalarqueryingConnectedSearch | read-only | current | Indication of whether (1) or not (2) a search facility is currently connected for querying. (System Management Console: Services > Search) |
| 1.3.6.1.4.1.116.5.46.5.9.1.2 | ScalarindexingConnectedSearch | read-only | obsolete | Indication of whether (1) or not (2) a search facility is currently connected for indexing. (System Management Console: Services > Search) |
| 1.3.6.1.4.1.116.5.46.5.9.2 | NodesearchSettings | |||
| 1.3.6.1.4.1.116.5.46.5.9.2.1 | ScalarenabledSearchConsole | read-only | current | Indication of whether (1) or not (2) the Search Console is available. (System Management Console: Services > Search) |
| 1.3.6.1.4.1.116.5.46.5.9.2.2 | ScalarenabledSearchAPI | read-write | obsolete | Enables (1) or disables (2) Hitachi Data Discovery Suite (HDDS) access to the HCP system. (System Management Console: Services > Search) |
| 1.3.6.1.4.1.116.5.46.5.9.2.3 | ScalarqueryingEnabledSearch | read-only | current | Indication of whether (1) or not (2) the repository is able to be searched. This applies across all namespaces. (System Management Console: Services > Search) |
| 1.3.6.1.4.1.116.5.46.5.9.2.4 | ScalarindexingEnabledSearch | read-write | obsolete | Enables (1) or disables (2) indexing of new objects and metadata changes. This applies across all namespaces. (System Management Console: Services > Search) |
| 1.3.6.1.4.1.116.5.46.5.9.2.5 | ScalarenabledSearchAdminUI | read-write | obsolete | Enables (1) or disables (2) access to the search facility administrative interface. (System Management Console: Services > Search) |
| 1.3.6.1.4.1.116.5.46.5.9.2.6 | ScalarsearchFacility | read-only | current | Name of the search facility currently selected for use with the Search Console: 'MQE', 'HDDS', or 'None' if no search facility is selected. (System Management … |
| 1.3.6.1.4.1.116.5.46.5.9.3 | NodemetadataQueryEngineSettings | |||
| 1.3.6.1.4.1.116.5.46.5.9.3.1 | ScalarenabledMqeApi | read-only | current | Indication of whether (1) or not (2) the metadata query API is enabled. (System Management Console: Services > Search > Search Facility Settings > MQE) |
| 1.3.6.1.4.1.116.5.46.5.9.3.2 | ScalarenabledMqeIndexing | read-only | current | Indication of whether (1) or not (2) metadata query indexing is enabled. (System Management Console: Services > Search > Search Facility Settings > MQE) |
| 1.3.6.1.4.1.116.5.46.5.9.3.3 | ScalarenabledMqeIndexingOfCustomMetadata | read-only | current | Indication of whether (1) or not (2) metadata query engine indexing of custom metadata is enabled. (System Management Console: Services > Search > Search Facil… |
| 1.3.6.1.4.1.116.5.46.5.9.4 | NodehcpSearchFacilitySettings | |||
| 1.3.6.1.4.1.116.5.46.5.9.4.1 | ScalarenabledHcpSearchApi | read-only | obsolete | Indication of whether (1) or not (2) the HCP search facility API is enabled. (System Management Console: Services > Search > Search Facility Settings > HCP Sea… |
| 1.3.6.1.4.1.116.5.46.5.9.4.2 | ScalarenabledHcpSearchFacilityAdminInterfaceAccess | read-only | obsolete | Indication of whether (1) or not (2) access to the HCP search facility administrative interface is enabled. (System Management Console: Services > Search > Sea… |
| 1.3.6.1.4.1.116.5.46.5.9.4.3 | ScalarenabledHcpSearchFacilityIndexing | read-only | obsolete | Indication of whether (1) or not (2) HCP search facility indexing is enabled. (System Management Console: Services > Search > Search Facility Settings > HCP Se… |
| 1.3.6.1.4.1.116.5.46.5.9.4.4 | ScalarenabledHcpSearchFacilityCustomMetadataIndexing | read-only | obsolete | Indication of whether (1) or not (2) HCP search facility indexing of custom metadata is enabled. (System Management Console: Services > Search > Search Facilit… |
| 1.3.6.1.4.1.116.5.46.5.10 | Nodeshredding | |||
| 1.3.6.1.4.1.116.5.46.5.10.1 | NodeshreddingStats | |||
| 1.3.6.1.4.1.116.5.46.5.10.1.1 | ScalarshreddingObjectCount | read-only | current | Number of objects and parts of multipart uploads and multipart objects currently waiting to be shredded. (System Management Console: Services > Shredding) |
| 1.3.6.1.4.1.116.5.46.5.10.1.2 | ScalarshreddingTotalObjectSizeBytes | read-only | current | Total number of bytes of object data, part data, and metadata currently waiting to be shredded. (System Management Console: Services > Shredding) |
| 1.3.6.1.4.1.116.5.46.5.10.2 | NodeshreddingSettings | |||
| 1.3.6.1.4.1.116.5.46.5.10.2.1 | ScalarshreddingRate | read-write | current | Rate at which HCP processes objects and parts of multipart uploads and multipart objects waiting to be shredded. The higher the rate, the faster the objects an… |
| 1.3.6.1.4.1.116.5.46.5.10.2.2 | ScalarshreddingSendSyslogEvents | read-only | current | Indication of whether (1) or not (2) to send messages about shredding events to syslog servers. (System Management Console: Services > Shredding) |
| 1.3.6.1.4.1.116.5.46.5.11 | Nodemigration | |||
| 1.3.6.1.4.1.116.5.46.5.11.1 | NodemigrationStats | |||
| 1.3.6.1.4.1.116.5.46.5.11.1.1 | ScalarmigrationDescription | read-only | current | Migration description. (System Management Console: Services > Migration) |
| 1.3.6.1.4.1.116.5.46.5.11.1.2 | ScalarmigrationState | read-only | current | Current status of the migration. (System Management Console: Services > Migration) |
| 1.3.6.1.4.1.116.5.46.5.11.1.3 | ScalarmigrationCompleteSize | read-only | current | Number of bytes migrated. (System Management Console: Services > Migration) |
| 1.3.6.1.4.1.116.5.46.5.11.1.4 | ScalarmigrationCompleteObjects | read-only | current | Number of objects and parts of multipart objects migrated. (System Management Console: Services > Migration) |
| 1.3.6.1.4.1.116.5.46.5.11.1.5 | ScalarmigrationTotalSize | read-only | current | Total number of bytes to be migrated. (System Management Console: Services > Migration) |
| 1.3.6.1.4.1.116.5.46.5.11.1.6 | ScalarmigrationTotalObjects | read-only | current | Total number of objects and parts of multipart objects to be migrated. (System Management Console: Services > Migration) |
| 1.3.6.1.4.1.116.5.46.5.11.1.7 | ScalarmigrationRuntime | read-only | current | Time consumed by migration. (System Management Console: Services > Migration) |
| 1.3.6.1.4.1.116.5.46.5.11.1.8 | ScalarmigrationRemainingTime | read-only | current | Estimated remaining time for the migration to complete. (System Management Console: Services > Migration) |
| 1.3.6.1.4.1.116.5.46.5.12 | NodestorageTiering | |||
| 1.3.6.1.4.1.116.5.46.5.12.1 | NodestorageTieringStats | |||
| 1.3.6.1.4.1.116.5.46.5.12.1.1 | ScalarstorageTieringStatus | read-only | current | Current status of the storage tiering service. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.12.1.2 | ScalarstorageTieringStatusTime | read-only | current | Date and time the storage tiering service status was last updated. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.13 | Nodedisposition | |||
| 1.3.6.1.4.1.116.5.46.5.13.1 | NodedispositionStats | |||
| 1.3.6.1.4.1.116.5.46.5.13.1.1 | ScalardispositionStatus | read-only | current | Current status of the disposition service. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.13.1.2 | ScalardispositionStatusTime | read-only | current | Date and time the disposition service status was last updated. (System Management Console: Overview > Services) |
| 1.3.6.1.4.1.116.5.46.5.13.2 | NodedispositionSettings | |||
| 1.3.6.1.4.1.116.5.46.5.14 | NodeerasureCoding | |||
| 1.3.6.1.4.1.116.5.46.5.14.1 | TableecTopologyTable | not-accessible | current | Table of erasure coding topologies. |
| 1.3.6.1.4.1.116.5.46.5.14.1.1 | RowecTopologyTableEntry | not-accessible | current | Information about each erasure coding topology. |
| 1.3.6.1.4.1.116.5.46.5.14.1.1.1 | ColumnecTopologyTableIndex | not-accessible | current | Index into ecTopologyTable. |
| 1.3.6.1.4.1.116.5.46.5.14.1.1.2 | ColumnecTopologyName | read-only | current | Erasure coding topology name. (System Management Console: Services > Geo-distributed EC > EC Topologies > [ecTopologyName] > Overview) |
| 1.3.6.1.4.1.116.5.46.5.14.1.1.3 | ColumnecTopologyState | read-only | current | Erasure coding topology state. (System Management Console: Services > Geo-distributed EC > EC Topologies > [ecTopologyName] > Overview) |
| 1.3.6.1.4.1.116.5.46.5.14.1.1.4 | ColumnecTopologyProtectionStatus | read-only | current | Erasure coding topology protection status. (System Management Console: Services > Geo-distributed EC > EC Topologies > [ecTopologyName] > Overview) |
| 1.3.6.1.4.1.116.5.46.5.14.1.1.5 | ColumnecTopologyReadStatus | read-only | current | Erasure coding topology read status. (System Management Console: Services > Geo-distributed EC > EC Topologies > [ecTopologyName] > Overview) |
| 1.3.6.1.4.1.116.5.46.5.14.1.1.6 | ColumnecTopologyDataChunks | read-only | current | Number of data chunks in the erasure coding topology on this HCP system. (System Management Console: Services > Geo-distributed EC > EC Topologies > [ecTopolog… |
| 1.3.6.1.4.1.116.5.46.5.14.1.1.7 | ColumnecTopologyParityChunks | read-only | current | Number of parity chunks in the erasure coding topology on this HCP system. (System Management Console: Services > Geo-distributed EC > EC Topologies > [ecTopol… |
| 1.3.6.1.4.1.116.5.46.5.14.1.1.8 | ColumnecTopologyType | read-only | current | Erasure coding topology type. (System Management Console: Services > Geo-distributed EC > EC Topologies > [ecTopologyName] > Overview) |
| 1.3.6.1.4.1.116.5.46.5.14.1.1.9 | ColumnecTopologyErasureCodedObjectCount | read-only | current | Number of erasure-coded objects and parts of multipart objects in the erasure coding topology on this HCP system. (System Management Console: Services > Geo-di… |
| 1.3.6.1.4.1.116.5.46.6 | NodehcpSecurity | |||
| 1.3.6.1.4.1.116.5.46.6.1 | NodedataAccessPermissions | |||
| 1.3.6.1.4.1.116.5.46.6.1.1 | ScalardataAccessRead | read-write | current | Indication of whether (1) or not (2) the systemwide permission mask includes the read permission. (System Management Console: Security > Permissions) |
| 1.3.6.1.4.1.116.5.46.6.1.2 | ScalardataAccessWrite | read-write | current | Indication of whether (1) or not (2) the systemwide permission mask includes the write permission. (System Management Console: Security > Permissions) |
| 1.3.6.1.4.1.116.5.46.6.1.3 | ScalardataAccessDelete | read-write | current | Indication of whether (1) or not (2) the systemwide permission mask includes the delete permission. (System Management Console: Security > Permissions) |
| 1.3.6.1.4.1.116.5.46.6.1.4 | ScalardataAccessPurge | read-write | current | Indication of whether (1) or not (2) the systemwide permission mask includes the purge permission. (System Management Console: Security > Permissions) |
| 1.3.6.1.4.1.116.5.46.6.1.5 | ScalardataAccessPrivileged | read-write | current | Indication of whether (1) or not (2) the systemwide permission mask includes the privileged permission. (System Management Console: Security > Permissions) |
| 1.3.6.1.4.1.116.5.46.6.1.6 | ScalardataAccessSearch | read-write | current | Indication of whether (1) or not (2) the systemwide permission mask includes the search permission. (System Management Console: Security > Permissions) |
| 1.3.6.1.4.1.116.5.46.6.2 | NodenetworkSecurity | |||
| 1.3.6.1.4.1.116.5.46.6.2.1 | ScalarpingEnabled | read-write | current | Allows (1) or prevents (2) HCP nodes from responding to ping requests. (System Management Console: Security > Network Security) |
| 1.3.6.1.4.1.116.5.46.6.2.2 | ScalarsshEnabled | read-write | current | Allows (1) or prevents (2) access to HCP nodes through SSH. (System Management Console: Security > Network Security) |
| 1.3.6.1.4.1.116.5.46.6.2.3 | ScalarnodeStatusEnabled | read-only | current | Allows (1) or prevents (2) HCP nodes from responding to node status requests. (System Management Console: Security > Network Security) |
| 1.3.6.1.4.1.116.5.46.6.3 | NodeactiveDirectory | |||
| 1.3.6.1.4.1.116.5.46.6.3.1 | ScalaradEnabled | read-write | current | Active Directory status. (System Management Console: Security > Active Directory) |
| 1.3.6.1.4.1.116.5.46.6.3.2 | ScalaradDomainName | read-only | current | Active Directory domain name. (System Management Console: Security > Active Directory) |
| 1.3.6.1.4.1.116.5.46.6.3.3 | ScalaradComputerAccount | read-only | current | HCP computer account for Active Directory support. (System Management Console: Security > Active Directory) |
| 1.3.6.1.4.1.116.5.46.6.3.4 | ScalaradOrganizationalUnit | read-only | current | Organizational unit for Active Directory support. (System Management Console: Security > Active Directory) |
| 1.3.6.1.4.1.116.5.46.6.3.5 | ScalaradSSOConfiguredCorrectly | read-only | current | Indication of whether (1) or not (2) Active Directory single sign-on is configured correctly for all tenants and namespaces for which it is enabled. (System Ma… |
| 1.3.6.1.4.1.116.5.46.6.3.6 | ScalaradComputerAccountExists | read-only | current | Indication of whether (1) or not (2) the HCP computer account exists in Active Directory. (System Management Console: Security > Active Directory > Status) |
| 1.3.6.1.4.1.116.5.46.6.4 | NodeopenStack | |||
| 1.3.6.1.4.1.116.5.46.6.4.1 | ScalarosIdentityServiceEnabled | read-only | current | OpenStack Identity Service status. (System Management Console: Security > Openstack) |
| 1.3.6.1.4.1.116.5.46.7 | NodehcpMonitoring | |||
| 1.3.6.1.4.1.116.5.46.7.1 | NodesystemStatus | |||
| 1.3.6.1.4.1.116.5.46.7.1.1 | ScalarhcpVersion | read-only | current | Current version of HCP. (System Management Console: all pages) |
| 1.3.6.1.4.1.116.5.46.7.1.2 | ScalarserialNumber | read-only | current | Serial number of the HCP system. (System Management Console: all pages) |
| 1.3.6.1.4.1.116.5.46.7.1.3 | ScalarhcpMibVersion | read-only | current | Version of this MIB file. |
| 1.3.6.1.4.1.116.5.46.7.1.4 | ScalarcurrentTime | read-only | current | Current HCP system internal date and time. (System Management Console: all pages) |
| 1.3.6.1.4.1.116.5.46.7.1.5 | ScalarmetricsTime | read-only | current | Date and time of the last update to HCP system metrics. |
| 1.3.6.1.4.1.116.5.46.7.1.6 | ScalartotalCapacity | read-only | current | Total amount of storage space in the HCP system, in bytes. (System Management Console: Overview > Storage Volume) |
| 1.3.6.1.4.1.116.5.46.7.1.7 | ScalarprotectedVolume | read-only | current | Amount of storage space, in bytes, currently occupied by all stored data, including original file data, metadata, and any redundant data required to conform to… |
| 1.3.6.1.4.1.116.5.46.7.1.8 | ScalaringestedDataVolume | read-only | current | Total size, in bytes, of the stored data and custom metadata before it was added to the repository. (System Management Console: Overview > Storage Volume) |
| 1.3.6.1.4.1.116.5.46.7.1.9 | ScalarobjectCount | read-only | current | Total number of objects stored in the repository. (System Management Console: Overview > Objects) |
| 1.3.6.1.4.1.116.5.46.7.1.10 | ScalarindexedObjectCount | read-only | current | Number of indexed, and therefore searchable, objects stored in the repository. (System Management Console: Overview > Objects) |
| 1.3.6.1.4.1.116.5.46.7.1.11 | ScalarhcpStorageType | read-only | current | Type of storage used by the HCP system. |
| 1.3.6.1.4.1.116.5.46.7.1.12 | ScalarreplicationEnabled | read-only | current | Indication of whether (1) or not (2) replication is enabled for the HCP system. |
| 1.3.6.1.4.1.116.5.46.7.1.13 | ScalarsearchEnabled | read-only | obsolete | Indication of whether (1) or not (2) search is enabled for the HCP system. |
| 1.3.6.1.4.1.116.5.46.7.1.14 | ScalarsystemDplUnsafe | read-only | current | Indication of whether (1) or not (2) the HCP system DPL setting is below what is considered safe. It is highly recommended that systems with internal storage h… |
| 1.3.6.1.4.1.116.5.46.7.1.15 | ScalarirreparableObjectsPresent | read-only | current | Indication of whether (1) or not (2) the repository contains any irreparable objects. |
| 1.3.6.1.4.1.116.5.46.7.1.16 | ScalarunavailableObjectsPresent | read-only | current | Indication of whether (1) or not (2) the repository contains any unavailable objects. |
| 1.3.6.1.4.1.116.5.46.7.1.17 | ScalarcurrentMQEIndexSize | read-only | current | Size, in bytes, of the metadata query engine index. |
| 1.3.6.1.4.1.116.5.46.7.1.18 | ScalarhcpHotfixVersion | read-only | current | Hotfix versions applied to the system. (System Management Console: all pages) |
| 1.3.6.1.4.1.116.5.46.7.1.19 | ScalarspindownStorageUsage | read-only | current | Total amount of used space in spindown storage on all storage nodes. (System Management Console: Storage Tiering > Volume Usage graph) |
| 1.3.6.1.4.1.116.5.46.7.1.20 | ScalarspindownStorageCapacity | read-only | current | Total amount of spindown storage capacity on all storage nodes. (System Management Console: Storage Tiering > Volume Usage graph) |
| 1.3.6.1.4.1.116.5.46.7.1.21 | ScalarindexingVolumesUsageByIndex | read-only | current | Total amount of space used by the index on all index-enabled volumes. (System Management Console: Services > Search > Search Facility Settings > MQE) |
| 1.3.6.1.4.1.116.5.46.7.1.22 | ScalarindexingVolumesUsageByOtherData | read-only | current | Total amount of space used by data other than the index on all index-enabled volumes. (System Management Console: Services > Search > Search Facility Settings … |
| 1.3.6.1.4.1.116.5.46.7.1.23 | ScalarindexingVolumesCapacity | read-only | current | Total space on all index-enabled volumes. (System Management Console: Services > Search > Search Facility Settings > MQE) |
| 1.3.6.1.4.1.116.5.46.7.1.24 | ScalarindexingTotalIndexVolumesCapacity | read-only | current | Total space on all dedicated index volumes. (System Management Console: Services > Search > Search Facility Settings > MQE) |
| 1.3.6.1.4.1.116.5.46.7.1.25 | ScalarindexingTotalSharedVolumesCapacity | read-only | current | Total space on all shared volumes. (System Management Console: Services > Search > Search Facility Settings > MQE) |
| 1.3.6.1.4.1.116.5.46.7.1.26 | ScalarspindownTimePercentWeek | read-only | current | Average percent of time spindown storage has been spun down over the past week. (System Management Console: Services > Storage Tiering) |
| 1.3.6.1.4.1.116.5.46.7.1.27 | ScalarspindownTimePercentMonth | read-only | current | Average percent of time spindown storage has been spun down over the past month. (System Management Console: Services > Storage Tiering) |
| 1.3.6.1.4.1.116.5.46.7.1.28 | ScalarspindownTimePercentSixMonths | read-only | current | Average percent of time spindown storage has been spun down over the past six months. (System Management Console: Services > Storage Tiering) |
| 1.3.6.1.4.1.116.5.46.7.1.29 | ScalarnetworkManagementEnabled | read-only | current | Indication of whether (1) or not (2) virtual network management is enabled. (System Management Console: Configuration > Miscellaneous) |
| 1.3.6.1.4.1.116.5.46.7.1.30 | ScalartimeSource | read-only | current | Type of time source used by the HCP system. |
| 1.3.6.1.4.1.116.5.46.7.1.31 | ScalarprotocolOptimization | read-only | current | The HCP system's current protocol optimization setting. (System Management Console: Configuration > Protocol Optimization) |
| 1.3.6.1.4.1.116.5.46.7.1.32 | ScalaradvancedDNSNetwork | read-only | current | Indication of whether (1) or not (2) the advanced DNS mode is enabled. |
| 1.3.6.1.4.1.116.5.46.7.1.33 | ScalareconomyStorageUsage | read-only | current | Total amount of used space on all S-Series nodes. (System Management Console: Overview > Storage Usage graph) |
| 1.3.6.1.4.1.116.5.46.7.1.34 | ScalareconomyStorageCapacity | read-only | current | Total amount of storage capacity on all S-Series nodes. (System Management Console: Overview > Storage Usage graph) |
| 1.3.6.1.4.1.116.5.46.7.1.35 | ScalarnonReplicatingIrreparableObjects | read-only | current | Total number of objects in the HCP system that currently cannot be replicated because they are irreparable. |
| 1.3.6.1.4.1.116.5.46.7.1.36 | ScalarnonReplicatingOpenObjects | read-only | current | Total number of objects in the HCP system that currently cannot be replicated because they are open. |
| 1.3.6.1.4.1.116.5.46.7.1.37 | ScalarunavailableObjects | read-only | current | Total number of unavailable objects in the HCP system. |
| 1.3.6.1.4.1.116.5.46.7.1.38 | ScalarhcpPatchVersion | read-only | current | Patch version applied to the system. (System Management Console: all pages) |
| 1.3.6.1.4.1.116.5.46.7.1.39 | ScalarerasureCodedObjectCount | read-only | current | Number of erasure-coded objects and erasure-coded parts of multipart objects on this HCP system. (System Management Console: Storage > Overview) |
| 1.3.6.1.4.1.116.5.46.7.1.40 | ScalarmultipartObjectCount | read-only | current | Number of multipart objects. |
| 1.3.6.1.4.1.116.5.46.7.1.41 | ScalarmultipartObjectPartCount | read-only | current | Total number of parts of multipart objects. |
| 1.3.6.1.4.1.116.5.46.7.1.42 | ScalarmultipartObjectSize | read-only | current | Total size, in bytes, of multipart objects. |
| 1.3.6.1.4.1.116.5.46.7.1.43 | ScalarmultipartUploadCount | read-only | current | Number of in-progress multipart uploads. |
| 1.3.6.1.4.1.116.5.46.7.1.44 | ScalarmultipartUploadPartCount | read-only | current | Total number of parts for in-progress multipart uploads. |
| 1.3.6.1.4.1.116.5.46.7.1.45 | ScalarmultipartUploadSize | read-only | current | Total size, in bytes, of parts for in-progress multipart uploads. |
| 1.3.6.1.4.1.116.5.46.7.2 | NodehiCommand | |||
| 1.3.6.1.4.1.116.5.46.7.2.1 | NodedeviceMgr | |||
| 1.3.6.1.4.1.116.5.46.7.2.1.1 | NodedeviceMgrStats | |||
| 1.3.6.1.4.1.116.5.46.7.2.1.1.1 | ScalarlastSuccessTimeHCDM | read-only | current | Date and time of the last successful update HCP sent to Hitachi Device Manager. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.1.1.2 | ScalarlastSuccessCodeHCDM | read-only | current | Response code from the last successful update HCP sent to Hitachi Device Manager. |
| 1.3.6.1.4.1.116.5.46.7.2.1.1.3 | ScalarlastSuccessMessageHCDM | read-only | current | Response message from the last successful update HCP sent to Hitachi Device Manager. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.1.1.4 | ScalarlastSuccessDetailsHCDM | read-only | current | Detailed response message from the last successful update sent to Hitachi Device Manager. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.1.1.5 | ScalarlastAttemptTimeHCDM | read-only | current | Date and time of the last attempt to send updated information to Hitachi Device Manager. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.1.1.6 | ScalarlastAttemptCodeHCDM | read-only | current | Response code from the last attempt to send updated information to Hitachi Device Manager. |
| 1.3.6.1.4.1.116.5.46.7.2.1.1.7 | ScalarlastAttemptMessageHCDM | read-only | current | Response message from the last attempt to send updated information to Hitachi Device Manager. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.1.1.8 | ScalarlastAttemptDetailsHCDM | read-only | current | Detailed response message from the last attempt to send updated information to Hitachi Device Manager. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.1.2 | NodedeviceMgrSettings | |||
| 1.3.6.1.4.1.116.5.46.7.2.1.2.1 | ScalarenabledHCDM | read-write | current | Enables (1) or disables (2) sending information to Hitachi Device Manager. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.1.2.2 | ScalarhostNameHCDM | read-write | current | IP address or hostname of the Hitachi Device Manager server. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.1.2.3 | ScalarhostUserNameHCDM | read-write | current | Username for logging into Hitachi Device Manager. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.1.2.4 | ScalarhostPasswordHCDM | read-write | current | Password for logging into Hitachi Device Manager. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.1.2.5 | ScalaravailableFrequenciesHCDM | read-write | current | CSV list of frequency settings (in seconds) available for sending updated information to Hitachi Device Manager. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.1.2.6 | ScalarfrequencyHCDM | read-write | current | Sets the frequency (in seconds) with which HCP sends updated information to Hitachi Device Manager. (System Management Console: Monitoring > HDvM) |
| 1.3.6.1.4.1.116.5.46.7.2.2 | NodetuningMgrIntegration | |||
| 1.3.6.1.4.1.116.5.46.7.3 | NodeexternalLogging | |||
| 1.3.6.1.4.1.116.5.46.7.3.1 | NodesyslogSettings | |||
| 1.3.6.1.4.1.116.5.46.7.3.1.1 | ScalarsyslogEnabled | read-only | current | Indication of whether (1) or not (2) log messages are being sent to syslog servers. (System Management Console: Monitoring > Syslog) |
| 1.3.6.1.4.1.116.5.46.7.3.1.2 | ScalarsyslogServerList | read-only | current | CSV list of the IP addresses of syslog servers to send log messages to. (System Management Console: Monitoring > Syslog) |
| 1.3.6.1.4.1.116.5.46.7.3.1.3 | ScalarsyslogLevel | read-only | current | Severity level of messages about unsecure events to send to syslog servers. (System Management Console: Monitoring > Syslog) |
| 1.3.6.1.4.1.116.5.46.7.3.1.4 | ScalarsyslogSendSecurityEvents | read-only | current | Indication of whether (1) or not (2) to send messages about secure events to syslog servers. (System Management Console: Monitoring > Syslog) |
| 1.3.6.1.4.1.116.5.46.7.3.1.5 | ScalarsyslogSendComplianceEvents | read-only | current | Indication of whether (1) or not (2) to send messages about compliance events to syslog servers. (System Management Console: Monitoring > Syslog) |
| 1.3.6.1.4.1.116.5.46.7.3.1.6 | ScalarsyslogFacility | read-only | current | Syslog facility to which log messages are directed. (System Management Console: Monitoring > Syslog) |
| 1.3.6.1.4.1.116.5.46.7.3.1.7 | ScalarsyslogSendHttpAccessLogs | read-only | current | Indication of whether (1) or not (2) to send messages about HTTP data access to syslog servers. (System Management Console: Monitoring > Syslog) |
| 1.3.6.1.4.1.116.5.46.7.3.1.8 | ScalarsyslogSendMapiAccessLogs | read-only | current | Indication of whether (1) or not (2) to send messages about management API access to syslog servers. (System Management Console: Monitoring > Syslog) |
| 1.3.6.1.4.1.116.5.46.7.3.1.9 | ScalarhttpLogFacility | read-only | current | HTTP log facility to which log messages are directed. (System Management Console: Monitoring > Syslog) |
| 1.3.6.1.4.1.116.5.46.7.3.1.10 | ScalarmapiLogFacility | read-only | current | Management API log facility to which log messages are directed. (System Management Console: Monitoring > Syslog) |
| 1.3.6.1.4.1.116.5.46.8 | NodehcpBackEndSwitches | |||
| 1.3.6.1.4.1.116.5.46.8.1 | TablehcpBackEndSwitchTable | not-accessible | current | Table of back-end switches in the HCP system. |
| 1.3.6.1.4.1.116.5.46.8.1.1 | RowhcpBackEndSwitchTableEntry | not-accessible | current | Information about each back-end switch. |
| 1.3.6.1.4.1.116.5.46.8.1.1.1 | ColumnbackEndSwitchIndex | not-accessible | current | Index into hcpBackEndSwitchTable. |
| 1.3.6.1.4.1.116.5.46.8.1.1.2 | ColumnbackEndSwitchType | read-only | current | Back-end switch type. (System Management Console: Hardware > Component Status) |
| 1.3.6.1.4.1.116.5.46.8.1.1.3 | ColumnbackEndSwitchIpAddress | read-only | current | IP address of the back-end switch. (System Management Console: Hardware > Component Status) |
| 1.3.6.1.4.1.116.5.46.8.1.1.4 | ColumnbackEndSwitchStatus | read-only | current | Status of the back-end switch. (System Management Console: Hardware > Component Status) |
| 1.3.6.1.4.1.116.5.46.1000 | IdentityhcpMIB | The MIB module for managing HCP. | ||
| 1.3.6.1.4.1.116.5.46.1000.1 | NodehcpMIBConformance | |||
| 1.3.6.1.4.1.116.5.46.1000.1.1 | NodehcpMIBCompliances | |||
| 1.3.6.1.4.1.116.5.46.1000.1.1.1 | CompliancehcpMIBCompliance | current | The compliance statement for SNMPv2 entities that implement HCP. | |
| 1.3.6.1.4.1.116.5.46.1000.1.2 | NodehcpMIBGroups | |||
| 1.3.6.1.4.1.116.5.46.1000.1.2.1 | GrouphcpGroup | current | The group of objects provided for management of HCP entities. | |
| 1.3.6.1.4.1.116.5.46.1000.1.2.2 | GrouphcpNotificationGroup | current | The group of notifications provided for management of HCP entities |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DateTime | OCTET STRING (SIZE (0..25)) | current | Date and time as formatted by the libc ctime() function. |
| LongDisplayString | OCTET STRING (SIZE (0..1024)) | current | Definition of sized string type. |