HDR2-MIB
74 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429 | Nodeusr | |||
| 1.3.6.1.4.1.429.4 | Nodecommon | |||
| 1.3.6.1.4.1.429.4.48 | Nodehdr2 | |||
| 1.3.6.1.4.1.429.4.48.1 | Nodehdr2Cfg | |||
| 1.3.6.1.4.1.429.4.48.1.1 | Tablehdr2CfgTable | not-accessible | mandatory | A table containing the configuration parameters for the Hiper E1/R2 Card. |
| 1.3.6.1.4.1.429.4.48.1.1.1 | Rowhdr2CfgEntry | not-accessible | mandatory | Configuration parameters for the E1/R2 module. |
| 1.3.6.1.4.1.429.4.48.1.1.1.1 | Columnhdr2CfgIndex | read-only | mandatory | The index which uniquely identifies the Hiper E1/R2 CARD to which this entry is applicable. |
| 1.3.6.1.4.1.429.4.48.1.1.1.2 | Columnhdr2CfgRegSigType | read-write | mandatory | This object Defines the type of Register Signaling used for Bit Oriented Signaling. |
| 1.3.6.1.4.1.429.4.48.1.1.1.3 | Columnhdr2CfgAnumIden | read-write | mandatory | This parameter enables or disables the collection of calling party ( A party or ANI) phone numbers when used with R2MFC signaling type. |
| 1.3.6.1.4.1.429.4.48.1.1.1.4 | Columnhdr2CfgForcedRel | read-write | mandatory | In E1/ R2 ,Forced Release Line signal will be sent only in case of this parameter is enabled. This signal is optional. |
| 1.3.6.1.4.1.429.4.48.1.1.1.5 | Columnhdr2CfgLastBDigTout | read-write | mandatory | This parameter decides, after how many milliseconds of silence during the B digit reception, the B party number is assumed as completed. |
| 1.3.6.1.4.1.429.4.48.1.1.1.6 | Columnhdr2CfgAddrComplete | read-write | mandatory | On reception of this signal it is assumed that the required number of B party digits are received. It can hold the values ranging from A1 to A15. It depends on… |
| 1.3.6.1.4.1.429.4.48.1.1.1.7 | Columnhdr2CfgEndBparty | read-write | mandatory | This indicates whether I15 is will be received as an indication for End of B party number or not. If enabled, at the end of B party number , this I15 signal is… |
| 1.3.6.1.4.1.429.4.48.1.1.1.8 | Columnhdr2CfgAlawMulaw | read-write | mandatory | This object is configuration to apply A Law(E1) or MuLaw(T1) Companding. |
| 1.3.6.1.4.1.429.4.48.1.1.1.9 | Columnhdr2CfgLineSigType | read-write | mandatory | This object defines the type of Line Signaling for Bit Oriented Signaling. |
| 1.3.6.1.4.1.429.4.48.1.1.1.10 | Columnhdr2CfgProjID | read-write | mandatory | Depending on this parameter, country dependent or project dependent parameters are updated. Each and every parameter has a set of variables to be initialized. |
| 1.3.6.1.4.1.429.4.48.1.1.1.11 | Columnhdr2CfgSeizeAck | read-write | mandatory | It defines whether seize acknowledge signal is used or not for Bit Oriented Signaling. |
| 1.3.6.1.4.1.429.4.48.1.1.1.12 | Columnhdr2CfgAnumBnum | read-write | mandatory | During Bit oriented Register Signaling , after number of B party ( called party or DNIS) digits have been received, the A party (calling or ANI) digits are req… |
| 1.3.6.1.4.1.429.4.48.1.1.1.13 | Columnhdr2CfgSubBusy | read-write | mandatory | This object is used in case of subscirber busy. |
| 1.3.6.1.4.1.429.4.48.1.1.1.14 | Columnhdr2CfgSndCallingPtyCatgy | read-write | mandatory | This register Signal requests the calling ( A PARTY's ) category. |
| 1.3.6.1.4.1.429.4.48.1.1.1.15 | Columnhdr2CfgLineDirection | read-write | mandatory | This object sets the direction of the channels on the span line. |
| 1.3.6.1.4.1.429.4.48.1.1.1.16 | Columnhdr2CfgPersistentOverride | read-write | mandatory | This object allows the recieved line signal persistence (debounce time). |
| 1.3.6.1.4.1.429.4.48.1.1.1.17 | Columnhdr2CfgWrongNumber | read-write | mandatory | This object is the backward register signal used to indicate that an invalid number has been dialed. |
| 1.3.6.1.4.1.429.4.48.1.1.1.18 | Columnhdr2CfgIncomingCpc | read-write | mandatory | This object determines the default calling party category to be assumed when none is supplied for an incoming call. |
| 1.3.6.1.4.1.429.4.48.1.1.1.19 | Columnhdr2CfgRegSigStatus | read-write | mandatory | This object determines whether or not register signalling is used for incoming and outgoing calls for R2. |
| 1.3.6.1.4.1.429.4.48.1.1.1.20 | Columnhdr2CfgUnusedAbcd | read-write | mandatory | This object determines the bit pattern transmitted for whichever of the ABCD bits are not used for the selected line signalling scheme. This means CD for R2 Di… |
| 1.3.6.1.4.1.429.4.48.1.1.1.21 | Columnhdr2CfgBlkToBlk | read-write | mandatory | This object determines whether or not a blocking signals received in the idle state is automatically responded to with a transmitted block signals. |
| 1.3.6.1.4.1.429.4.48.1.1.1.22 | Columnhdr2CfgDelayLos | read-write | mandatory | This object determines the required duration of the LOS state before active calls are dropped and the signalling is reinitialised. Restoration of signal during… |
| 1.3.6.1.4.1.429.4.48.1.1.1.23 | Columnhdr2CfgInGlare | read-write | mandatory | This object determines whether the incoming call is accepted and the outgoing call is dropped in a glare condition, or both calls are dropped as currently impl… |
| 1.3.6.1.4.1.429.4.48.1.1.1.24 | Columnhdr2CfgClrCall | read-write | mandatory | This object determines whether an active call is cleared when an unexpected line signal is received, or the line signal is ignored as currently implemented. |
| 1.3.6.1.4.1.429.4.48.1.1.1.25 | Columnhdr2CfgANumQry | read-write | mandatory | This object determines whether or not an extra MFC cycle is used before to the A-number to indicate whether an A-number is available,using III-1 for yes and II… |
| 1.3.6.1.4.1.429.4.48.1.1.1.26 | Columnhdr2CfgANumNAv | read-write | mandatory | THis object interpret I-12 as A-number not available. |
| 1.3.6.1.4.1.429.4.48.1.1.1.27 | Columnhdr2CfgANumReq | read-write | mandatory | this object backward register signal used to request transmission of the next A-number digit Frequently this is the same as the signal used to request transmis… |
| 1.3.6.1.4.1.429.4.48.1.1.1.28 | Columnhdr2CfgClrFwd | read-write | mandatory | This object repeatd size/clear-forward sequence is sent to startup to try to provoke a response from attached equipment. |
| 1.3.6.1.4.1.429.4.48.1.1.1.29 | Columnhdr2CfgRelGuard | read-write | mandatory | This object is duration for which Release Guard signal is sent. |
| 1.3.6.1.4.1.429.4.48.1.1.1.30 | Columnhdr2CfgPIClrBck | read-write | mandatory | This object determines whether or not a repeated release/Seize-ack sequence is sent while attempting to clear anincoming call. |
| 1.3.6.1.4.1.429.4.48.1.1.1.31 | Columnhdr2CfgDelayAns | read-write | mandatory | this object determines the delay between the end of addressing and transmission of the answer signal. |
| 1.3.6.1.4.1.429.4.48.1.1.1.32 | Columnhdr2CfgBNumLen | read-write | mandatory | this object determines the number of B-number digits to accept beore sending the 'address complete'signal, provided the 'end of B_number'signal is not received… |
| 1.3.6.1.4.1.429.4.48.1.1.1.33 | Columnhdr2CfgActBTout | read-write | mandatory | this object determines action to be taken on last B-digit timeout. |
| 1.3.6.1.4.1.429.4.48.1.1.1.34 | Columnhdr2CfgInSubFree | read-write | mandatory | this object backward register signal used to indicate acceptance of an incoming call. |
| 1.3.6.1.4.1.429.4.48.1.1.1.35 | Columnhdr2CfgBNumNFnd | read-write | mandatory | this object determines the action on B-Number not found in teh DNIS handling table. |
| 1.3.6.1.4.1.429.4.48.1.1.1.36 | Columnhdr2CfgSndBNumN | read-write | mandatory | this object backward signal requesting retransmission of curent B-number digit for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.37 | Columnhdr2CfgSndBNumN1 | read-write | mandatory | this object backward signal requesting transmission of B-number digit N-1 for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.38 | Columnhdr2CfgSndBNumN2 | read-write | mandatory | this object backward signal requesting transimission of B-number digit N-2 for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.39 | Columnhdr2CfgSndBNumN3 | read-write | mandatory | this object backward signal requesting transimission of B-number digit N-3 for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.40 | Columnhdr2CfgSndFBNum | read-write | mandatory | this object determines whether or not the I-15 'end of B-number' signal is used for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.41 | Columnhdr2CfgDumANum | read-write | mandatory | this object default A-number for outgoing calls in case none is supplied during call initiation. |
| 1.3.6.1.4.1.429.4.48.1.1.1.42 | Columnhdr2CfgEndANum | read-write | mandatory | This object forward register signal used to indicate that no more a_number digits are avaible.default=iii-15. |
| 1.3.6.1.4.1.429.4.48.1.1.1.43 | Columnhdr2CfgOutCatAnalog | read-write | mandatory | This object forward signals used to indicate the call category for outgoing calls. |
| 1.3.6.1.4.1.429.4.48.1.1.1.44 | Columnhdr2CfgOutCatDigital | read-write | mandatory | |
| 1.3.6.1.4.1.429.4.48.1.1.1.45 | Columnhdr2CfgOutCatTest | read-write | mandatory | |
| 1.3.6.1.4.1.429.4.48.1.1.1.46 | Columnhdr2CfgOutCatMaintenance | read-write | mandatory | |
| 1.3.6.1.4.1.429.4.48.2 | Nodehdr2InCatMap | |||
| 1.3.6.1.4.1.429.4.48.2.1 | Tablehdr2InCatMapTable | not-accessible | mandatory | A table containing in cat map configurations for the Hiper E1/R2 Module. |
| 1.3.6.1.4.1.429.4.48.2.1.1 | Rowhdr2InCatMapEntry | not-accessible | mandatory | Configuration parameters for the E1/R2 module. |
| 1.3.6.1.4.1.429.4.48.2.1.1.1 | Columnhdr2InCatMapIndex | read-only | mandatory | The index which uniquely identifies the Hiper E1/R2 Module to which this entry is applicable. |
| 1.3.6.1.4.1.429.4.48.2.1.1.2 | Columnhdr2InCatMapSigNum | read-only | mandatory | This object is the index for one of 15 possible forward call category signals for imcoming calls. |
| 1.3.6.1.4.1.429.4.48.2.1.1.3 | Columnhdr2InCatMapCallType | read-write | mandatory | This object determines the meaning of forward call category for incoming calls. |
| 1.3.6.1.4.1.429.4.48.3 | Nodehdr2Pte | |||
| 1.3.6.1.4.1.429.4.48.3.1 | Tablehdr2PteTable | not-accessible | mandatory | A table containing the Positron Trap Enable configurations for the Hiper E1/R2 Module. |
| 1.3.6.1.4.1.429.4.48.3.1.1 | Rowhdr2PteEntry | not-accessible | mandatory | Trap Enable Configuration parameters for the E1/R2 module. |
| 1.3.6.1.4.1.429.4.48.3.1.1.1 | Columnhdr2PteIndex | read-only | mandatory | The index which uniquely identifies the Hiper E1/R2 Module to which this entry is applicable. |
| 1.3.6.1.4.1.429.4.48.3.1.1.2 | Columnhdr2PteMultiFrame | read-write | mandatory | Enable the generation of an SNMP trap upon detection of a Multi-Frame Alignment condition on the specified DS1. |
| 1.3.6.1.4.1.429.4.48.3.1.1.3 | Columnhdr2PteMultiFrameClr | read-write | mandatory | Enable the generation of an SNMP trap upon detection of clearing a Multi-Frame Alignment condition on the specified DS1. |
| 1.3.6.1.4.1.429.4.48.3.1.1.4 | Columnhdr2PteRemMultiFrame | read-write | mandatory | Enable the generation of an SNMP trap upon detection of a Remote Multi-Frame Alignment condition on the specified DS1. |
| 1.3.6.1.4.1.429.4.48.3.1.1.5 | Columnhdr2PteRemMultiFrameClr | read-write | mandatory | Enable the generation of an SNMP trap upon detection of clearing a Remote Multi-Frame Alignment condition on the specified DS1. |
| 1.3.6.1.4.1.429.4.48.4 | Nodehdr2Te | |||
| 1.3.6.1.4.1.429.4.48.4.1 | Tablehdr2TeTable | not-accessible | mandatory | A table containing the Trap Enable configurations for the Hiper E1/R2 Module. |
| 1.3.6.1.4.1.429.4.48.4.1.1 | Rowhdr2TeEntry | not-accessible | mandatory | Trap Enable Configuration parameters for the E1/R2 module. |
| 1.3.6.1.4.1.429.4.48.4.1.1.1 | Columnhdr2TeIndex | read-only | mandatory | The index which uniquely identifies the Hiper E1/R2 CARD to which this entry is applicable. |
| 1.3.6.1.4.1.429.4.48.4.1.1.2 | Columnhdr2TeMultiFrame | read-write | mandatory | Enable the generation of an SNMP trap upon detection of a Multi-Frame Alignment condition on the specified DS1. |
| 1.3.6.1.4.1.429.4.48.4.1.1.3 | Columnhdr2TeMultiFrameClr | read-write | mandatory | Enable the generation of an SNMP trap upon detection of clearing a Multi-Frame Alignment condition on the specified DS1. |
| 1.3.6.1.4.1.429.4.48.4.1.1.4 | Columnhdr2TeRemMultiFrame | read-write | mandatory | Enable the generation of an SNMP trap upon detection of a Remote Multi-Frame Alignment condition on the specified DS1. |
| 1.3.6.1.4.1.429.4.48.4.1.1.5 | Columnhdr2TeRemMultiFrameClr | read-write | mandatory | Enable the generation of an SNMP trap upon detection of clearing a Remote Multi-Frame Alignment condition on the specified DS1. |