HJ-PNNI-MIB
78 objects
No module-level DESCRIPTION found.
Imported Objects
| IF-MIB | -- ifIndex -- |
| PNNI-MIB | -- pnniIfEntry -- -- pnniLinkEntry -- -- pnniNbrPeerEntry -- -- pnniNodeEntry -- -- PnniPortId -- -- Unsigned32 -- |
| SNMPv2-SMI | -- Counter32 -- -- enterprises -- -- Integer32 -- -- MODULE-IDENTITY -- -- OBJECT-TYPE -- |
| SNMPv2-TC | -- DisplayString -- -- TEXTUAL-CONVENTION -- -- TruthValue -- |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.603 | Nodeharrisjeffries | |||
| 1.3.6.1.4.1.603.2 | NodehjStdExtensions | |||
| 1.3.6.1.4.1.603.2.10 | NodehjTransmission | |||
| 1.3.6.1.4.1.603.2.10.2 | NodehjAtm | |||
| 1.3.6.1.4.1.603.2.10.2.7 | NodehjAtmPnni | |||
| 1.3.6.1.4.1.603.2.10.2.7.2 | NodehjPnniBaseGroup | |||
| 1.3.6.1.4.1.603.2.10.2.7.2.1 | ScalarhjPnniLoggingFile | read-write | mandatory | The name of the debug logging file for diagnostic messages. This must be set to a non-null string in order for diagnostic messages to be produced. |
| 1.3.6.1.4.1.603.2.10.2.7.2.2 | ScalarhjPnniLoggingMask | read-write | mandatory | A bit-mask indicating which classes of debug diagnostics are to be printed. The bit mask positions are defined by symbols HJ_PNNI_LC_* in the Harris and Jeffri… |
| 1.3.6.1.4.1.603.2.10.2.7.2.3 | ScalarhjPnniAddressRoundRobin | read-write | mandatory | A flag which (when set to TRUE) enables Round Robin Address Selection for multi-homed ATM Addresses. Using this feature, when multiple PNNI nodes advertise the… |
| 1.3.6.1.4.1.603.2.10.2.7.2.4 | ScalarhjPnniRoundRobinNbrPortUse | read-write | mandatory | A flag which (when set to true) enables Round Robin Selection of ports for PNNI database (PTSE) exchanges with neighbors. This flag only has effect when multip… |
| 1.3.6.1.4.1.603.2.10.2.7.2.5 | ScalarhjPnniCacheTimerFreq | read-write | mandatory | The frequency of the Cache Timer. The cache timer is used to age out and, possibly, recalculate cached paths, when this feature is enabled in the switching sys… |
| 1.3.6.1.4.1.603.2.10.2.7.2.6 | ScalarhjPnniCacheAge | read-write | mandatory | The age of a set of cached routes to a destination when the cache is considered old. When a destination cache is discovered to be old, the cache timer will flu… |
| 1.3.6.1.4.1.603.2.10.2.7.2.7 | ScalarhjPnniCacheRecentInt | read-write | mandatory | The maximum interval of time since a cache of paths to a destination node was referenced (by a route calculation) which is considered a recent reference to the… |
| 1.3.6.1.4.1.603.2.10.2.7.2.8 | ScalarhjPnniCacheNumEntries | read-only | mandatory | The current number of cached paths being maintained by the path-caching logic of the switching system. |
| 1.3.6.1.4.1.603.2.10.2.7.2.9 | ScalarhjPnniCacheMaxPaths | read-write | mandatory | The maximum of paths per destination node which will be calculated to each node destination, when path-caching is enabled. |
| 1.3.6.1.4.1.603.2.10.2.7.2.10 | ScalarhjPnniCacheMaxEntries | read-write | mandatory | The maximum of nodal destinations which can contain cached paths, when this feature is enabled. If a cache is needed to a new destination, and there are alread… |
| 1.3.6.1.4.1.603.2.10.2.7.2.11 | ScalarhjPnniCacheEnable | read-write | mandatory | Enables path-caching for this switch system. The feature must also be enabled by compile-time switches to allow enabling path-caching. |
| 1.3.6.1.4.1.603.2.10.2.7.2.12 | ScalarhjPnniAllowLGNPathLoops | read-write | mandatory | Modifies the Dijkstra (path-calculation) algorithm in this switch system to allow or disallow loops of paths when computing paths through Logical Group Nodes. … |
| 1.3.6.1.4.1.603.2.10.2.7.3 | TablehjPnniNodeTable | not-accessible | mandatory | H&J supplemental information for a PNNI node in this switching system. |
| 1.3.6.1.4.1.603.2.10.2.7.3.1 | RowhjPnniNodeEntry | not-accessible | mandatory | An entry in the table, supplemental information of a PNNI logical node in this switching system. |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.1 | ColumnhjPnniNodeLoggingMask | read-write | mandatory | A bit-mask indicating which classes of debug diagnostics are to be printed for this node. This mask is logically ANDed with the global mask hjPnniLoggingMask b… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.2 | ColumnhjPnniNodeMinDynamicPortId | read-write | mandatory | The minimum value this node will assign to dynamically created port IDs, based on receipt of information over SVCC-based RCCs. For lowest-level nodes, the rang… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.3 | ColumnhjPnniNodeMaxDynamicPortId | read-write | mandatory | The maximum value this node will assign to dynamically created port IDs, based on receipt of information over SVCC-based RCCs. For lowest-level nodes, the rang… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.4 | ColumnhjPnniNodeSvccCellTransferDelay | read-write | mandatory | Defines the maximum acceptible Cell Transfer Delay for SVCC-based RCCs initiated by this node as the calling party. Used only when initiating an SVCC-based RCC… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.5 | ColumnhjPnniNodeSvccCellDelayVariation | read-write | mandatory | Defines the maximum acceptible Cell Delay Variation for SVCC-based RCCs initiated by this node as the calling party. Used only when initiating an SVCC-based RC… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.6 | ColumnhjPnniNodeSvccCellLossRatio | read-write | mandatory | Defines the maximum acceptible Cell Loss Ratio for SVCC-based RCCs initiated by this node as the calling party. Used only when initiating an SVCC-based RCC, an… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.7 | ColumnhjPnniNodeSvccAbrInitialCellRate | read-write | mandatory | Defines the Initial Cell Rate subfield for inclusion in the ABR Setup Parameters information element within Setup messages when initiating an ABR SVCC-based RC… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.8 | ColumnhjPnniNodeSvccAbrTransientBufferExposure | read-write | mandatory | Defines the Transient Buffer Exposure subfield for inclusion in the ABR Setup Parameters information element within Setup messages when initiating an ABR SVCC-… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.9 | ColumnhjPnniNodeSvccAbrRateIncreaseFactor | read-write | mandatory | Defines the Rate Increase Factor subfield for inclusion in the ABR Setup Parameters information element within Setup messages when initiating an ABR SVCC-based… |
| 1.3.6.1.4.1.603.2.10.2.7.3.1.10 | ColumnhjPnniNodeSvccAbrRateDecreaseFactor | read-write | mandatory | Defines the Rate Decrease Factor subfield for inclusion in the ABR Setup Parameters information element within Setup messages when initiating an ABR SVCC-based… |
| 1.3.6.1.4.1.603.2.10.2.7.4 | TablehjPnniIfTable | not-accessible | mandatory | H&J supplemental information for a PNNI interface in this switching system. |
| 1.3.6.1.4.1.603.2.10.2.7.4.1 | RowhjPnniIfEntry | not-accessible | mandatory | An entry in the table, supplemental information of a PNNI interface in this switching system. |
| 1.3.6.1.4.1.603.2.10.2.7.4.1.1 | ColumnhjPnniIfLoggingMask | read-write | mandatory | A bit-mask indicating which classes of debug diagnostics are to be printed for this interface. This mask is logically ANDed with the global mask hjPnniLoggingM… |
| 1.3.6.1.4.1.603.2.10.2.7.4.1.2 | ColumnhjPnniIfMaxRccPacketSize | read-write | mandatory | The maximum size, in bytes, of PNNI packets transmitted on this interface. |
| 1.3.6.1.4.1.603.2.10.2.7.4.1.3 | ColumnhjPnniIfCbrResourceIndex | read-write | mandatory | If non-zero, this specifies the second index in the hjPnniIfResourceTable, which defines a set of resource availability characteristics to define the availabil… |
| 1.3.6.1.4.1.603.2.10.2.7.4.1.4 | ColumnhjPnniIfRtVbrResourceIndex | read-write | mandatory | If non-zero, this specifies the second index in the hjPnniIfResourceTable, which defines a set of resource availability characteristics to define the availabil… |
| 1.3.6.1.4.1.603.2.10.2.7.4.1.5 | ColumnhjPnniIfNrtVbrResourceIndex | read-write | mandatory | If non-zero, this specifies the second index in the hjPnniIfResourceTable, which defines a set of resource availability characteristics to define the availabil… |
| 1.3.6.1.4.1.603.2.10.2.7.4.1.6 | ColumnhjPnniIfAbrResourceIndex | read-write | mandatory | If non-zero, this specifies the second index in the hjPnniIfResourceTable, which defines a set of resource availability characteristics to define the availabil… |
| 1.3.6.1.4.1.603.2.10.2.7.4.1.7 | ColumnhjPnniIfUbrResourceIndex | read-write | mandatory | If non-zero, this specifies the second index in the hjPnniIfResourceTable, which defines a set of resource availability characteristics to define the availabil… |
| 1.3.6.1.4.1.603.2.10.2.7.5 | TablehjPnniNbrPeerTable | not-accessible | mandatory | H&J supplemental information for a PNNI neighbor in this switching system. |
| 1.3.6.1.4.1.603.2.10.2.7.5.1 | RowhjPnniNbrPeerEntry | not-accessible | mandatory | An entry in the table, supplemental information of a PNNI neighbor in this switching system. |
| 1.3.6.1.4.1.603.2.10.2.7.5.1.1 | ColumnhjPnniNbrPeerRcvPtses | read-only | mandatory | A count of the number of PTSEs received from the neighboring peer. Includes PTSEs received within PTSPs as well as expired PTSE headers received during the dat… |
| 1.3.6.1.4.1.603.2.10.2.7.5.1.2 | ColumnhjPnniNbrPeerXmtPtses | read-only | mandatory | A count of the number of PTSEs transmitted to the neighboring peer. |
| 1.3.6.1.4.1.603.2.10.2.7.5.1.3 | ColumnhjPnniNbrPeerRcvPtseErrs | read-only | mandatory | A count of the number of PTSEs received from the neighboring peer which had bad PTSE Header Checksums. |
| 1.3.6.1.4.1.603.2.10.2.7.5.1.4 | ColumnhjPnniNbrPeerRcvDbSummErrs | read-only | mandatory | A count of the number of Database Summary packets received from the neighboring peer which had syntax errors. |
| 1.3.6.1.4.1.603.2.10.2.7.5.1.5 | ColumnhjPnniNbrPeerRcvPtspErrs | read-only | mandatory | A count of the number of PTSPs received from the neighboring peer which had syntax errors. |
| 1.3.6.1.4.1.603.2.10.2.7.5.1.6 | ColumnhjPnniNbrPeerRcvPtseReqErrs | read-only | mandatory | A count of the number of PTSE Request packets received from the neighboring peer which had syntax errors. |
| 1.3.6.1.4.1.603.2.10.2.7.5.1.7 | ColumnhjPnniNbrPeerRcvPtseAckErrs | read-only | mandatory | A count of the number of PTSE Ack packets received from the neighboring peer which had syntax errors. |
| 1.3.6.1.4.1.603.2.10.2.7.5.1.8 | ColumnhjPnniNbrPeerDSMismatches | read-only | mandatory | A count of the number of Database Summary packets received from the neighboring peer which caused a Database Summary Mismatch condition. This condition is caus… |
| 1.3.6.1.4.1.603.2.10.2.7.5.1.9 | ColumnhjPnniNbrPeerBadPtseReqs | read-only | mandatory | A count of the number of times this node received a PTSE Request from the neighboring peer which this node did not advertise. This condition (occurring during … |
| 1.3.6.1.4.1.603.2.10.2.7.6 | TablehjPnniLinkTable | not-accessible | mandatory | H&J supplemental information for a PNNI interface in this switching system. |
| 1.3.6.1.4.1.603.2.10.2.7.6.1 | RowhjPnniLinkEntry | not-accessible | mandatory | An entry in the table, supplemental information of a PNNI link in this switching system. |
| 1.3.6.1.4.1.603.2.10.2.7.6.1.1 | ColumnhjPnniLinkRcvUnknownPkts | read-only | mandatory | This attribute contains a count of the number of received packets on the specified link which were unrecognized as any of the known PNNI packet types: Hello, P… |
| 1.3.6.1.4.1.603.2.10.2.7.6.1.2 | ColumnhjPnniLinkRcvHelloMismatches | read-only | mandatory | This attribute contains a count of the number of received Hello packets on the specified link which were detected as having a Hello Mismatch error. A Hello mis… |
| 1.3.6.1.4.1.603.2.10.2.7.6.1.3 | ColumnhjPnniLinkRcvHelloErrors | read-only | mandatory | This attribute contains a count of the number of received Hello packets on the specified link which were detected as being malformed in some way. Examples are … |
| 1.3.6.1.4.1.603.2.10.2.7.7 | TablehjPnniIfResourceTable | not-accessible | mandatory | This table contains Resource Availability parameters which can be used to describe the ability of an interface to accept user traffic, on a per-service-class b… |
| 1.3.6.1.4.1.603.2.10.2.7.7.1 | RowhjPnniIfResourceEntry | not-accessible | mandatory | An entry in the table, containing resource availability information for interfaces in this switching system. |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.1 | ColumnhjPnniIfResourceIndex | not-accessible | mandatory | Identifies a set of Resource Availability characteristics which can be used to define availability of one or more ATM service classes on the specified interfac… |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.2 | ColumnhjPnniIfResourceGCACCLPAttribute | read-write | mandatory | Indicates if the GCAC CLP Attribute should be set for the service classes assigned to this table entry. The default value for this object (created when the int… |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.3 | ColumnhjPnniIfResourceAdmWeight | read-write | mandatory | The Administrative Weight of this interface for the service classes assigned to this table entry. The default value for this object (created when the interface… |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.4 | ColumnhjPnniIfResourceMaximumCellRate | read-write | mandatory | The Maximum Cell Rate (in cells per second) of this interface for the service classes assigned to this table entry. The default value for this object (created … |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.5 | ColumnhjPnniIfResourceAvailableCellRate | read-write | mandatory | The Available Cell Rate (in cells per second) of this interface for the service classes assigned to this table entry. The default value for this object (create… |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.6 | ColumnhjPnniIfResourceCellTransferDelay | read-write | mandatory | The maximum Cell Transfer Delay (in microseconds) of this interface for the service classes assigned to this table entry. The default value for this object (cr… |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.7 | ColumnhjPnniIfResourceCellDelayVariation | read-write | mandatory | The peak-to-peak Cell Delay Variation (in microseconds) of this interface for the service classes assigned to this table entry. The default value for this obje… |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.8 | ColumnhjPnniIfResourceCellLossRatioCLP0 | read-write | mandatory | The maximum cell loss ratio (CLR) objective for CLP=0 traffic of this interface for the service classes assigned to this table entry. The default value for thi… |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.9 | ColumnhjPnniIfResourceCellLossRatioCLP01 | read-write | mandatory | The maximum cell loss ratio (CLR) objective for CLP=0+1 traffic of this interface for the service classes assigned to this table entry. The default value for t… |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.10 | ColumnhjPnniIfResourceUseOptionalGCAC | read-write | mandatory | Specifies whether the service classes assigned to this table entry should use the optional GCAC parameters, Cell Rate Margin and Variance Factor to describe th… |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.11 | ColumnhjPnniIfResourceCellRateMargin | read-write | mandatory | This parameter is only applicable if the value of hjPnniIfResourceUseOptionalGCAC is set to 'true'. Cell Rate Margin is a measure of the difference between the… |
| 1.3.6.1.4.1.603.2.10.2.7.7.1.12 | ColumnhjPnniIfResourceVarianceFactor | read-write | mandatory | This parameter is only applicable if the value of hjPnniIfResourceUseOptionalGCAC is set to 'true'. Variance Factor is a realtive measure of the square of the … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| HjPnniIfResourceIndex | INTEGER (0..5) | ||
| Integer32 | INTEGER | ||
| TruthValue | INTEGER { true(1), false(2) } |