HORIZON-ODU-MIB
497 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.11.0 | NodecoldStart | A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation … | ||
| 1.3.6.1.2.1.11.1 | NodelinkDown | A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. | ||
| 1.3.6.1.2.1.11.2 | NodelinkUp | A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. | ||
| 1.3.6.1.4.1.7262.2.2 | NodehorizonOdu | |||
| 1.3.6.1.4.1.7262.2.2.1 | NodehzOduSystem | |||
| 1.3.6.1.4.1.7262.2.2.1.1 | NodehzOduSysGeneral | |||
| 1.3.6.1.4.1.7262.2.2.1.1.1 | ScalarhzOduResetSystem | write-only | mandatory | Writing '1' to this object resets the NIC, Modem, and radio. |
| 1.3.6.1.4.1.7262.2.2.1.1.2 | ScalarhzOduSaveMIB | write-only | mandatory | Writing '1' to this object save all MIB values. Note: If the horizon type is 'apng120' or 'apng170' and the radio band doesn't match the horizon type, Mib can'… |
| 1.3.6.1.4.1.7262.2.2.1.1.3 | ScalarhzOduOperStatus | read-only | mandatory | The current operational state of the system. Testing indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.7262.2.2.1.1.4 | ScalarhzOduAirInterfaceEncryption | read-only | mandatory | OBSOLETE. This enables encryption on the air interface. |
| 1.3.6.1.4.1.7262.2.2.1.1.5 | ScalarhzOduSystemRedundancy | read-write | mandatory | Sets system redundancy on/off. If there are any radio failures then the system will automatically switch to redundant system. |
| 1.3.6.1.4.1.7262.2.2.1.2 | NodehzOduSysSpeed | |||
| 1.3.6.1.4.1.7262.2.2.1.2.1 | ScalarhzOduSystemCurrentSpeed | read-write | mandatory | Changes the working speed of the horizon. Writes are only valid if system is a FLEX. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps. |
| 1.3.6.1.4.1.7262.2.2.1.2.2 | ScalarhzOduSystemLicensedSpeed | read-only | mandatory | Indicates the maximum speed that this system can operate at. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps. |
| 1.3.6.1.4.1.7262.2.2.1.2.3 | ScalarhzOduSystemMode | read-only | mandatory | Indicates the specific type of system this is. |
| 1.3.6.1.4.1.7262.2.2.1.2.4 | ScalarhzOduUpgradeLicensedSpeed | write-only | mandatory | Enter your apngFLEX key here along with the maximum speed for that key to upgrade the FLEX system. Format: [speed] [key] Example: 50 abc123 |
| 1.3.6.1.4.1.7262.2.2.1.3 | NodehzOduInventory | |||
| 1.3.6.1.4.1.7262.2.2.1.3.1 | NodehzOduHwInventory | |||
| 1.3.6.1.4.1.7262.2.2.1.3.1.1 | ScalarhzOduUnitSerialNo | read-only | mandatory | A textual string containing Serial no of the Unit. |
| 1.3.6.1.4.1.7262.2.2.1.3.1.2 | ScalarhzOduUnitAssemblylNo | read-only | mandatory | A textual string containing assembly no of the Unit. |
| 1.3.6.1.4.1.7262.2.2.1.3.1.3 | ScalarhzOduIfSerialNo | read-only | mandatory | A textual string containing Serial no of the IF. |
| 1.3.6.1.4.1.7262.2.2.1.3.1.4 | ScalarhzOduIfAssemblylNo | read-only | mandatory | A textual string containing assembly no of the IF. |
| 1.3.6.1.4.1.7262.2.2.1.3.1.5 | ScalarhzOduRfSerialNo | read-only | mandatory | A textual string containing Serial no of the RF. |
| 1.3.6.1.4.1.7262.2.2.1.3.1.6 | ScalarhzOduRfAssemblylNo | read-only | mandatory | A textual string containing assembly no of the RF. |
| 1.3.6.1.4.1.7262.2.2.1.3.1.7 | ScalarhzOduNccSerialNo | read-only | mandatory | A textual string containing Serial no of the NCC. |
| 1.3.6.1.4.1.7262.2.2.1.3.1.8 | ScalarhzOduNccAssemblylNo | read-only | mandatory | A textual string containing assembly no of the NCC. |
| 1.3.6.1.4.1.7262.2.2.1.3.1.9 | ScalarhzOduDiplexerSerialNo | read-only | mandatory | A textual string containing Serial no of the Diplexer. |
| 1.3.6.1.4.1.7262.2.2.1.3.1.10 | ScalarhzOduDiplexerAssemblylNo | read-only | mandatory | A textual string containing assembly no of the Diplexer. |
| 1.3.6.1.4.1.7262.2.2.1.3.2 | NodehzOduSwInventory | |||
| 1.3.6.1.4.1.7262.2.2.1.3.2.1 | ScalarhzOduSystemOmniVersionNo | read-only | mandatory | The version number of the Omni. |
| 1.3.6.1.4.1.7262.2.2.1.3.2.2 | ScalarhzOduModemOmniVersionNo | read-only | mandatory | The version number of the Modem FPGA. |
| 1.3.6.1.4.1.7262.2.2.1.3.2.3 | ScalarhzOduFrequencyFileVersionNo | read-only | mandatory | The version number of the FrequencyFile. |
| 1.3.6.1.4.1.7262.2.2.1.3.2.4 | ScalarhzOduMibVersionNo | read-only | mandatory | The version number of the MIB. |
| 1.3.6.1.4.1.7262.2.2.1.4 | NodehzOduAtpc | |||
| 1.3.6.1.4.1.7262.2.2.1.4.1 | ScalarhzOduAtpcEnable | read-write | mandatory | Indicates whether Automatic Transmit Power Control (ATPC) is enabled. |
| 1.3.6.1.4.1.7262.2.2.1.4.2 | ScalarhzOduAtpcCoordinatedPowerDbm | read-write | mandatory | This defines the coordinated power level. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dBm. |
| 1.3.6.1.4.1.7262.2.2.1.5 | NodehzOduAam | |||
| 1.3.6.1.4.1.7262.2.2.1.5.1 | ScalarhzOduAamEnable | read-write | mandatory | Indicates whether Automatic Adaptive Modulation(AAM) is enabled. |
| 1.3.6.1.4.1.7262.2.2.1.6 | NodehzOduPeerSysInfo | |||
| 1.3.6.1.4.1.7262.2.2.1.6.1 | ScalarhzOduPeerMacAddress | read-only | mandatory | The MAC Address of the peer network interface card. |
| 1.3.6.1.4.1.7262.2.2.1.6.2 | ScalarhzOduPeerIpAddress | read-only | mandatory | The IP Address of the peer network interface card. |
| 1.3.6.1.4.1.7262.2.2.1.6.3 | ScalarhzOduPeerSubnetMask | read-only | mandatory | The subnet mask for the peer network interface card. |
| 1.3.6.1.4.1.7262.2.2.1.7 | NodehzOduSysRedundancy | |||
| 1.3.6.1.4.1.7262.2.2.1.7.1 | ScalarhzOduSystemRedundancyMode | read-write | mandatory | allows the user to set system redundancy mode: [ off | primary-hsb-1wire | secondary-hsb-1wire | primary-hsb-2wire | secondary-hsb-2wire ] |
| 1.3.6.1.4.1.7262.2.2.1.7.2 | ScalarhzOduSystemRedundancyOverride | read-write | mandatory | Allows the user to override the active link. User can forces the link to stay on either primary or secondary link. |
| 1.3.6.1.4.1.7262.2.2.1.7.3 | ScalarhzOduSystemRedundancyLinkStatus | read-only | mandatory | Indicates the redundancy link status. |
| 1.3.6.1.4.1.7262.2.2.1.7.4 | ScalarhzOduSystemRedundancyStandbyEnetState | read-write | mandatory | Allows the user to set standby enet(port1) state. |
| 1.3.6.1.4.1.7262.2.2.1.7.5 | ScalarhzOduSystemRedundancyStateSwitch | write-only | mandatory | Allows the user to switch redundancy state. |
| 1.3.6.1.4.1.7262.2.2.2 | NodehzOduAuthentication | |||
| 1.3.6.1.4.1.7262.2.2.2.1 | ScalarhzOduUniquePeerAuthenticationKey | read-write | mandatory | The serial number of the peer node that this node will communicate with. This is only used when authentication mode is set to unique. |
| 1.3.6.1.4.1.7262.2.2.2.2 | ScalarhzOduPeerDetectedSerialNumber | read-only | mandatory | The serial number of the peer node that the system is presently communicating with. This is only used when authentication is set to unique. |
| 1.3.6.1.4.1.7262.2.2.2.3 | ScalarhzOduAuthenticationMode | read-write | mandatory | This sets the authentication mode for the system.If configured for unique authentication, an horizon node only exchanges user traffic with one other horizon no… |
| 1.3.6.1.4.1.7262.2.2.2.4 | ScalarhzOduAuthenticationFailureAction | read-write | mandatory | This sets the authentication failure action for the system. Block traffic will block all user traffic including remote management access. Pass traffic will all… |
| 1.3.6.1.4.1.7262.2.2.2.5 | ScalarhzOduPeerAuthenticationStatus | read-only | mandatory | Specifies the current authentication status of the system. Authenticated means authentication is on and the system has been authenticated, notAuthenticated mea… |
| 1.3.6.1.4.1.7262.2.2.3 | NodehzOduNetworkManagement | |||
| 1.3.6.1.4.1.7262.2.2.3.1 | ScalarhzOduMacAddress | read-only | mandatory | The MAC Address of the network interface card. |
| 1.3.6.1.4.1.7262.2.2.3.2 | ScalarhzOduNetworkManagementInterface | read-only | mandatory | Describes the network management interface connection options. |
| 1.3.6.1.4.1.7262.2.2.3.3 | ScalarhzOduIpAddress | read-only | mandatory | The IP Address of the network interface card. |
| 1.3.6.1.4.1.7262.2.2.3.4 | ScalarhzOduSubnetMask | read-only | mandatory | The subnet mask for the network interface card. |
| 1.3.6.1.4.1.7262.2.2.3.5 | ScalarhzOduDefaultGateway | read-only | mandatory | The default gateway for the network interface card |
| 1.3.6.1.4.1.7262.2.2.3.6 | ScalarhzOduTelnetAccessMode | read-write | mandatory | Indicates whether Telnet access is allowed. |
| 1.3.6.1.4.1.7262.2.2.3.7 | ScalarhzOduSshAccessMode | read-write | mandatory | Indicates whether ssh access is allowed. |
| 1.3.6.1.4.1.7262.2.2.3.8 | ScalarhzOduVlanTagEnable | read-write | mandatory | Indicates whether VLAN tagging is enabled. |
| 1.3.6.1.4.1.7262.2.2.3.9 | ScalarhzOduVlanTagId | read-write | mandatory | |
| 1.3.6.1.4.1.7262.2.2.3.10 | ScalarhzOduVlanTagPriority | read-write | mandatory | |
| 1.3.6.1.4.1.7262.2.2.4 | NodehzOduNetworkInterface | |||
| 1.3.6.1.4.1.7262.2.2.4.1 | NodehzOduEnetPort1 | |||
| 1.3.6.1.4.1.7262.2.2.4.1.1 | ScalarhzOduEnetPort1Description | read-only | mandatory | Describes the functionality of the port1 |
| 1.3.6.1.4.1.7262.2.2.4.1.2 | NodehzOduEnetPort1Config | |||
| 1.3.6.1.4.1.7262.2.2.4.1.2.1 | ScalarhzOduEnetPort1AutoNegotiation | read-write | mandatory | port1 Turns auto-negotiation on or off. Turning off results in the interface defaulting to 100BaseT, Full Duplex. |
| 1.3.6.1.4.1.7262.2.2.4.1.2.2 | ScalarhzOduEnetPort1Speed | read-write | mandatory | Configure the port1 interface speed . |
| 1.3.6.1.4.1.7262.2.2.4.1.2.3 | ScalarhzOduEnetPort1Duplex | read-only | mandatory | Configure the port1 interface duplex. |
| 1.3.6.1.4.1.7262.2.2.4.1.2.4 | ScalarhzOduEnetPort1Media | read-write | mandatory | Configure the port1 interface media. |
| 1.3.6.1.4.1.7262.2.2.4.1.2.5 | ScalarhzOduEnetPort1AdminState | read-only | mandatory | Configure the port1 interface media. |
| 1.3.6.1.4.1.7262.2.2.4.1.2.6 | ScalarhzOduEnetPort1OpticalTransceiverState | read-write | mandatory | When it is on, optical transmitter for port1 is enabled. Otherwise optical transmitter is disabled. |
| 1.3.6.1.4.1.7262.2.2.4.1.2.7 | ScalarhzOduEnetPort1PauseFrameEnable | read-write | mandatory | When PAUSE is enabled, port1 pause frames can be generated by the system and the pause frames will flow toward the link partner on the network. When PAUSE is n… |
| 1.3.6.1.4.1.7262.2.2.4.1.2.8 | ScalarhzOduEnetPort1MaxFrameSize | read-write | mandatory | For port1 the default maximum frame size is 1600 bytes. The settable maximum frame size must be a multiple of 128. If the chosen maximum frame size is not a mu… |
| 1.3.6.1.4.1.7262.2.2.4.1.2.9 | ScalarhzOduEnetPort1DroppedEnetFramesThresholdParameters | read-write | mandatory | A read-write string: The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the form… |
| 1.3.6.1.4.1.7262.2.2.4.1.2.10 | ScalarhzOduEnetPort1BandwidthUtilizationThresholdParameters | read-write | mandatory | A read-write string: The percentage of available bandwidth threshold and the number of seconds that it must exceed this threshold are programmed by the user. A… |
| 1.3.6.1.4.1.7262.2.2.4.1.3 | NodehzOduEnetPort1Status | |||
| 1.3.6.1.4.1.7262.2.2.4.1.3.1 | ScalarhzOduEnetPort1LinkStatus | read-only | mandatory | Indicates the port1 link status. |
| 1.3.6.1.4.1.7262.2.2.4.1.3.2 | ScalarhzOduEnetPort1AutoNegotiationStatus | read-only | mandatory | Indicates the port1 AutoNegotiation status. |
| 1.3.6.1.4.1.7262.2.2.4.1.3.3 | ScalarhzOduEnetPort1SpeedStatus | read-only | mandatory | Indicates the port1 interface speed status. |
| 1.3.6.1.4.1.7262.2.2.4.1.3.4 | ScalarhzOduEnetPort1DuplexStatus | read-only | mandatory | Indicates the port1 interface duplex status. |
| 1.3.6.1.4.1.7262.2.2.4.1.3.5 | ScalarhzOduEnetPort1MediaStatus | read-only | mandatory | Indicates the port1 interface media status. |
| 1.3.6.1.4.1.7262.2.2.4.1.4 | NodehzOduEnetPort1Stats | |||
| 1.3.6.1.4.1.7262.2.2.4.1.4.1 | ScalarhzOduEnetPort1TxFrames | read-only | mandatory | The current count of port1 frames sent. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.2 | ScalarhzOduEnetPort1TxBytes | read-only | mandatory | The current count of port1 bytes sent. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.3 | ScalarhzOduEnetPort1RxFrames | read-only | mandatory | The current count of port1 frames received. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.4 | ScalarhzOduEnetPort1RxBytes | read-only | mandatory | The current count of port1 bytes received. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.5 | ScalarhzOduEnetPort1RxFramesInError | read-only | mandatory | The current count of port1 frames received in error. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.6 | ScalarhzOduEnetPort1RxFramesCRCError | read-only | mandatory | The current count of CRC error frames received for port1. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.7 | ScalarhzOduEnetPort1BWUtilization | read-only | mandatory | The carried load over link capacity for port1. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.8 | ScalarhzOduEnetPort1IngressDataRate | read-only | mandatory | The data rate coming into the ethernet for port1. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs |
| 1.3.6.1.4.1.7262.2.2.4.1.4.9 | ScalarhzOduEnetPort1EgressDataRate | read-only | mandatory | The data rate going out of the ethernet for port1. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.10 | ScalarhzOduEnetPort1FramesInQueue1 | read-only | mandatory | The current count of port1 frames passed through queue 1. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.11 | ScalarhzOduEnetPort1FramesInQueue2 | read-only | mandatory | The current count of port1 frames passed through queue 2. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.12 | ScalarhzOduEnetPort1FramesInQueue3 | read-only | mandatory | The current count of NIC frames passed through queue 3. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.13 | ScalarhzOduEnetPort1FramesInQueue4 | read-only | mandatory | The current count of NIC frames passed through queue 4. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.14 | ScalarhzOduEnetPort1FramesInQueue1Discarded | read-only | mandatory | The current count of NIC frames received in queue 2 that were discarded, but due to an error. One possible reason is lack of buffer space. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.15 | ScalarhzOduEnetPort1FramesInQueue2Discarded | read-only | mandatory | The current count of port1 frames received in queue 2 that were discarded, but due to an error. One possible reason is lack of buffer space. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.16 | ScalarhzOduEnetPort1FramesInQueue3Discarded | read-only | mandatory | The current count of port1 frames received in queue 3 that were discarded, but due to an error. One possible reason is lack of buffer space. |
| 1.3.6.1.4.1.7262.2.2.4.1.4.17 | ScalarhzOduEnetPort1FramesInQueue4Discarded | read-only | mandatory | The current count of port1 frames received in queue 4 that were discarded, but due to an error. One possible reason is lack of buffer space. |
| 1.3.6.1.4.1.7262.2.2.4.2 | NodehzOduEnetPort2 | |||
| 1.3.6.1.4.1.7262.2.2.4.2.1 | ScalarhzOduEnetPort2Description | read-only | mandatory | Describes the functionality of the port2 |
| 1.3.6.1.4.1.7262.2.2.4.2.2 | NodehzOduEnetPort2Config | |||
| 1.3.6.1.4.1.7262.2.2.4.2.2.1 | ScalarhzOduEnetPort2AutoNegotiation | read-write | mandatory | port1 Turns auto-negotiation on or off. Turning off results in the interface defaulting to 100BaseT, Full Duplex. |
| 1.3.6.1.4.1.7262.2.2.4.2.2.2 | ScalarhzOduEnetPort2Speed | read-write | mandatory | Configure the port1 interface speed . |
| 1.3.6.1.4.1.7262.2.2.4.2.2.3 | ScalarhzOduEnetPort2Duplex | read-only | mandatory | Configure the port1 interface duplex. |
| 1.3.6.1.4.1.7262.2.2.4.2.2.4 | ScalarhzOduEnetPort2AdminState | read-only | mandatory | Configure the port2 shutdown media. |
| 1.3.6.1.4.1.7262.2.2.4.2.3 | NodehzOduEnetPort2Status | |||
| 1.3.6.1.4.1.7262.2.2.4.2.3.1 | ScalarhzOduEnetPort2LinkStatus | read-only | mandatory | Indicates the Port2 link status. |
| 1.3.6.1.4.1.7262.2.2.4.2.3.2 | ScalarhzOduEnetPort2AutoNegotiationStatus | read-only | mandatory | Indicates the Port2 AutoNegotiation status. |
| 1.3.6.1.4.1.7262.2.2.4.2.3.3 | ScalarhzOduEnetPort2SpeedStatus | read-only | mandatory | Indicates the Port2 interface speed status. |
| 1.3.6.1.4.1.7262.2.2.4.2.3.4 | ScalarhzOduEnetPort2DuplexStatus | read-only | mandatory | Indicates the Port2 interface duplex status. |
| 1.3.6.1.4.1.7262.2.2.4.2.3.5 | ScalarhzOduEnetPort2MediaStatus | read-only | mandatory | Indicates the port1 interface media status. |
| 1.3.6.1.4.1.7262.2.2.4.2.4 | NodehzOduEnetPort2Stats | |||
| 1.3.6.1.4.1.7262.2.2.4.2.4.1 | ScalarhzOduEnetPort2TxFrames | read-only | mandatory | The current count of Port2 frames sent. |
| 1.3.6.1.4.1.7262.2.2.4.2.4.2 | ScalarhzOduEnetPort2TxBytes | read-only | mandatory | The current count of Port2 bytes sent. |
| 1.3.6.1.4.1.7262.2.2.4.2.4.3 | ScalarhzOduEnetPort2RxFrames | read-only | mandatory | The current count of Port2 frames received. |
| 1.3.6.1.4.1.7262.2.2.4.2.4.4 | ScalarhzOduEnetPort2RxBytes | read-only | mandatory | The current count of Port2 bytes received. |
| 1.3.6.1.4.1.7262.2.2.4.2.4.5 | ScalarhzOduEnetPort2RxFramesInError | read-only | mandatory | The current count of Port2 frames received in error. |
| 1.3.6.1.4.1.7262.2.2.4.2.4.6 | ScalarhzOduEnetPort2RxFramesCrcError | read-only | mandatory | The current count of CRC error frames received for Port2. |
| 1.3.6.1.4.1.7262.2.2.5 | NodehzOduWirelessInterface | |||
| 1.3.6.1.4.1.7262.2.2.5.1 | NodehzOduWirelessPort1 | |||
| 1.3.6.1.4.1.7262.2.2.5.1.1 | ScalarhzOduWirelessPort1Description | read-only | mandatory | Describes the functionality of the Wireless Interface1 |
| 1.3.6.1.4.1.7262.2.2.5.1.2 | NodehzOduModem1 | |||
| 1.3.6.1.4.1.7262.2.2.5.1.2.1 | ScalarhzOduModem1AdminStatus | read-only | mandatory | The current admin state of the interface. Testing indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.7262.2.2.5.1.2.2 | ScalarhzOduModem1OperStatus | read-only | mandatory | The current operational state of the interface. Testing indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.7262.2.2.5.1.2.3 | ScalarhzOduModem1Reset | write-only | mandatory | Writing 1 to this object causes the modem card to be reset. All other values are not recognized. This variable always reads back as 0. mdmOperStatus should be … |
| 1.3.6.1.4.1.7262.2.2.5.1.2.4 | ScalarhzOduModem1ChannelizedRSL | read-only | mandatory | An estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value |
| 1.3.6.1.4.1.7262.2.2.5.1.2.5 | ScalarhzOduModem1ModulationType | read-only | mandatory | The modulation type of the modem, distinguished according to the physical/link protocol. |
| 1.3.6.1.4.1.7262.2.2.5.1.2.6 | ScalarhzOduModem1CurrentRxSpeed | read-only | mandatory | An estimate of the modem's current Rx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps |
| 1.3.6.1.4.1.7262.2.2.5.1.2.7 | ScalarhzOduModem1CurrentTxSpeed | read-only | mandatory | An estimate of the modem's current Tx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps |
| 1.3.6.1.4.1.7262.2.2.5.1.2.8 | ScalarhzOduModem1SNR | read-only | mandatory | SNR value in dB. Divide the value by 10 to get the actual SNR. |
| 1.3.6.1.4.1.7262.2.2.5.1.2.9 | ScalarhzOduModem1EbToNoiseRatio | read-only | mandatory | The ratio of the modem Estimated Energy per information bit to Noise power spectral density. Divide the value by 10 to get the actual EbToNoiseRatio |
| 1.3.6.1.4.1.7262.2.2.5.1.2.10 | ScalarhzOduModem1EqualizerStress | read-only | mandatory | Indicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working. |
| 1.3.6.1.4.1.7262.2.2.5.1.2.11 | ScalarhzOduModem1SNRThresholdParameters | read-write | mandatory | A read-write string |
| 1.3.6.1.4.1.7262.2.2.5.1.2.12 | ScalarhzOduModem1ChannelizedRslBelowThresholdParameters | read-write | mandatory | A read-write string: The threshold in dBm and the number of seconds threshold are programmed by the user. An example of the format of the string is as follows:… |
| 1.3.6.1.4.1.7262.2.2.5.1.2.13 | ScalarhzOduModem1LastChange | read-only | mandatory | The value of sysUpTime at the time the modem entered its current operational state. If the current state was entered prior to the last re-initialization of the… |
| 1.3.6.1.4.1.7262.2.2.5.1.2.14 | ScalarhzOduModem1ChannelizedRSLUnsignedInt | read-only | mandatory | An estimate of the modem's channelized RSL in dBm. The number is divided by 10. e.g. -432 is actually -43.2dBm. Object provided mainly to accomodate plotting o… |
| 1.3.6.1.4.1.7262.2.2.5.1.2.15 | NodehzOduModem1Statistics | |||
| 1.3.6.1.4.1.7262.2.2.5.1.2.15.1 | ScalarhzOduModem1TxFrames | read-only | mandatory | The current count of Modem frames sent. |
| 1.3.6.1.4.1.7262.2.2.5.1.2.15.2 | ScalarhzOduModem1RxFramesOK | read-only | mandatory | The current count of Modem frames received. |
| 1.3.6.1.4.1.7262.2.2.5.1.2.15.3 | ScalarhzOduModem1RxFramesError | read-only | mandatory | The current count of Modem frames received in error. |
| 1.3.6.1.4.1.7262.2.2.5.1.2.15.4 | ScalarhzOduModem1RxFramesQueueDiscarded | read-only | mandatory | The current count of Modem frames in the queue that were discarded. |
| 1.3.6.1.4.1.7262.2.2.5.1.2.15.5 | ScalarhzOduModem1TxBlocks | read-only | mandatory | The current count of Modem blocks transmitted. |
| 1.3.6.1.4.1.7262.2.2.5.1.2.15.6 | ScalarhzOduModem1RxBlocksOK | read-only | mandatory | The current count of Modem blocks received. |
| 1.3.6.1.4.1.7262.2.2.5.1.2.15.7 | ScalarhzOduModem1RxBlocksError | read-only | mandatory | The current count of Modem blocks received in error. |
| 1.3.6.1.4.1.7262.2.2.5.1.3 | NodehzOduRadio1 | |||
| 1.3.6.1.4.1.7262.2.2.5.1.3.1 | ScalarhzOduRadio1OperStatus | read-only | mandatory | The current operational state of the interface. Testing indicates that no operational packets can be passed. Testing also indicates that a firmware upgrade may… |
| 1.3.6.1.4.1.7262.2.2.5.1.3.2 | ScalarhzOduRadio1TransmitPowerDbm | read-write | mandatory | This defines the transmit level of the radio. If ATPC is enabled, you can't change the transmit power. The power you see is divided by 10. e.g. A display of 13… |
| 1.3.6.1.4.1.7262.2.2.5.1.3.3 | ScalarhzOduRadio1ProgrammedAntennaDiameter | read-write | mandatory | This defines the diameter of the antenna used by the system represented in inches. |
| 1.3.6.1.4.1.7262.2.2.5.1.3.4 | ScalarhzOduRadio1PowerOption | read-only | mandatory | This indicates the power option of the radio: normal or high power. |
| 1.3.6.1.4.1.7262.2.2.5.1.3.5 | ScalarhzOduRadio1TxState | read-only | mandatory | This indicates the power option of the radio: normal or high power. |
| 1.3.6.1.4.1.7262.2.2.5.1.3.6 | ScalarhzOduRadio1Temperature | read-only | mandatory | The Radio temperature in degree Centigrade. The actual temperature is got by dividing the number by 10. e.g. -432 is actually -43.2 degree centigrade. |
| 1.3.6.1.4.1.7262.2.2.6 | NodehzOduFrequencies | |||
| 1.3.6.1.4.1.7262.2.2.6.1 | ScalarhzOduRadioBand | read-write | mandatory | The radio frequency standard used in the system. Frequency bands are divided into sub bands. ie FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and fcc2… |
| 1.3.6.1.4.1.7262.2.2.6.2 | ScalarhzOduFreqGroupSelected | read-write | mandatory | The frequency group selected for the system. The frequency subbands are divided into frequency groups txHigh and txLow. An horizon system must have one node co… |
| 1.3.6.1.4.1.7262.2.2.6.3 | TablehzOduTxHighFreqTable | not-accessible | mandatory | A table of txHigh frequency settings for the system |
| 1.3.6.1.4.1.7262.2.2.6.3.1 | RowhzOduTxHighFreqEntry | not-accessible | mandatory | A txHighFrequency entry containing all the frequency values |
| 1.3.6.1.4.1.7262.2.2.6.3.1.1 | ColumnhzOduTxHighFreqIndex | read-only | mandatory | A unique value for each frequency channel. |
| 1.3.6.1.4.1.7262.2.2.6.3.1.2 | ColumnhzOduTxHighFreqChannelIndex | read-only | mandatory | The channel index for the frequency. |
| 1.3.6.1.4.1.7262.2.2.6.3.1.3 | ColumnhzOduTxHighFreqTransmitRfFrequency | read-only | mandatory | The RF TX frequency in MHz. |
| 1.3.6.1.4.1.7262.2.2.6.3.1.4 | ColumnhzOduTxHighFreqReceiveRfFrequency | read-only | mandatory | The RF RX frequency in MHz. |
| 1.3.6.1.4.1.7262.2.2.6.3.1.5 | ColumnhzOduTxHighFreqProgrammed | read-write | mandatory | Specifies the operating frequency channel for the modem. ***Only 1 index may be selected in a 1 modem system. |
| 1.3.6.1.4.1.7262.2.2.6.4 | TablehzOduTxLowFreqTable | not-accessible | mandatory | A table of txLow frequency settings for the system |
| 1.3.6.1.4.1.7262.2.2.6.4.1 | RowhzOduTxLowFreqEntry | not-accessible | mandatory | A hzOduTxLowFrequeny entry containing the frequency values for a specific index |
| 1.3.6.1.4.1.7262.2.2.6.4.1.1 | ColumnhzOduTxLowFreqIndex | read-only | mandatory | A unique value for each frequency channel. |
| 1.3.6.1.4.1.7262.2.2.6.4.1.2 | ColumnhzOduTxLowFreqChannelIndex | read-only | mandatory | The channel index for the frequency. |
| 1.3.6.1.4.1.7262.2.2.6.4.1.3 | ColumnhzOduTxLowFreqTransmitRfFrequency | read-only | mandatory | The RF TX frequency in MHz. |
| 1.3.6.1.4.1.7262.2.2.6.4.1.4 | ColumnhzOduTxLowFreqReceiveRfFrequency | read-only | mandatory | The RF RX frequency in MHz. |
| 1.3.6.1.4.1.7262.2.2.6.4.1.5 | ColumnhzOduTxLowFreqProgrammed | read-write | mandatory | Specifies the operating frequency channel for the modem. ***Only 1 index may be selected in a 1 modem system. |
| 1.3.6.1.4.1.7262.2.2.6.5 | NodehzOduProgrammedFrequency | |||
| 1.3.6.1.4.1.7262.2.2.6.5.1 | ScalarhzOduProgrammedFrequencyChannel | read-only | mandatory | The channel that has been programmed into the system. |
| 1.3.6.1.4.1.7262.2.2.6.5.2 | ScalarhzOduProgrammedFrequencyTxRf | read-only | mandatory | The programmed RF TX frequency in MHz. |
| 1.3.6.1.4.1.7262.2.2.6.5.3 | ScalarhzOduProgrammedFrequencyRxRf | read-only | mandatory | The RF RX frequency in MHz. |
| 1.3.6.1.4.1.7262.2.2.7 | NodehzOduCalendar | |||
| 1.3.6.1.4.1.7262.2.2.7.1 | ScalarhzOduDate | read-only | mandatory | A string in the format as follows: XX/YY/ZZ Where XX = day of month (range 01 to 31) YY = month of year(range 01 to 12) ZZ = year (range 01 - 99) |
| 1.3.6.1.4.1.7262.2.2.7.2 | ScalarhzOduTime | read-only | mandatory | A string in the format as follows: aa:bb:cc:dd Where aa = hour of day ( range 00 to 23 ) bb = minute of hour ( range 00 to 59 ) cc = second of minute( range 00… |
| 1.3.6.1.4.1.7262.2.2.8 | NodehzOduAlarms | |||
| 1.3.6.1.4.1.7262.2.2.8.1 | ScalarhzOduClearAlarmCounters | write-only | mandatory | Clears the alarm counters for the specified group |
| 1.3.6.1.4.1.7262.2.2.8.2 | NodehzOduSystemAlarms | |||
| 1.3.6.1.4.1.7262.2.2.8.2.1 | ScalarhzOduExplicitAuthenticationFailure | read-only | mandatory | Authentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty… |
| 1.3.6.1.4.1.7262.2.2.8.2.2 | ScalarhzOduExplicitAuthenticationFailureCount | read-only | mandatory | Indicates the number of times explicit authentication has failed. |
| 1.3.6.1.4.1.7262.2.2.8.2.3 | ScalarhzOduAamConfigMismatch | read-only | mandatory | In the near end Automatic Adaptive Modulation(AAM) feature set to on and in peer it is set to off |
| 1.3.6.1.4.1.7262.2.2.8.2.4 | ScalarhzOduAamConfigMismatchCount | read-only | mandatory | Indicates the approximate number of seconds AAMConfigMismatch alarm has been active. |
| 1.3.6.1.4.1.7262.2.2.8.2.5 | ScalarhzOduAamActive | read-only | mandatory | Indicates aam is active and system running on lowest modulation |
| 1.3.6.1.4.1.7262.2.2.8.2.6 | ScalarhzOduAamActiveCount | read-only | mandatory | Indicates the approximate number of seconds AAMActive alarm has been active. |
| 1.3.6.1.4.1.7262.2.2.8.2.7 | ScalarhzOduAtpcConfigMismatch | read-only | mandatory | In the near end Automatic Transmit Power Control(ATPC) feature set to on and in peer it is set to off |
| 1.3.6.1.4.1.7262.2.2.8.2.8 | ScalarhzOduAtpcConfigMismatchCount | read-only | mandatory | Indicates the approximate number of seconds AtpcConfigMismatch alarm has been active |
| 1.3.6.1.4.1.7262.2.2.8.2.9 | ScalarhzOduSntpServerUnavailableAlarm | read-only | mandatory | All of the SNTP servers are not available. |
| 1.3.6.1.4.1.7262.2.2.8.2.10 | ScalarhzOduSntpServerUnavailableAlarmCount | read-only | mandatory | Indicates how long in seconds all of the SNTP servers are not available. |
| 1.3.6.1.4.1.7262.2.2.8.2.11 | ScalarhzOduFrequencyFileInvalid | read-only | mandatory | Executing frequency file is valid or not |
| 1.3.6.1.4.1.7262.2.2.8.2.12 | ScalarhzOduFrequencyFileInvalidCount | read-only | mandatory | Indicates the time (in secs) since this alarm exist. |
| 1.3.6.1.4.1.7262.2.2.8.2.13 | ScalarhzOduAtpcAutoDisabled | read-only | mandatory | Indicates the ATPC set to off and system transmit at coordinated power. |
| 1.3.6.1.4.1.7262.2.2.8.2.14 | ScalarhzOduAtpcAutoDisabledCount | read-only | mandatory | Indicates the time (in secs) since this alarm exist. |
| 1.3.6.1.4.1.7262.2.2.8.2.15 | ScalarhzOduPartnerRedundancyModeMismatch | read-only | mandatory | Indicates partner redundancy mode mismatches. |
| 1.3.6.1.4.1.7262.2.2.8.2.16 | ScalarhzOduPartnerRedundancyModeMismatchCount | read-only | mandatory | Indicates the time (in secs) since this alarm exist. |
| 1.3.6.1.4.1.7262.2.2.8.2.17 | ScalarhzOduPartnerConfigurationMismatch | read-only | mandatory | Indicates partner configuration mismatches. |
| 1.3.6.1.4.1.7262.2.2.8.2.18 | ScalarhzOduPartnerConfigurationMismatchCount | read-only | mandatory | Indicates the time (in secs) since this alarm exist. |
| 1.3.6.1.4.1.7262.2.2.8.2.19 | ScalarhzOduHsbActiveOnSecondary | read-only | mandatory | Indicates the hsb active link is on secondary. |
| 1.3.6.1.4.1.7262.2.2.8.2.20 | ScalarhzOduHsbActiveOnSecondaryCount | read-only | mandatory | Indicates the time (in secs) since this alarm exist. |
| 1.3.6.1.4.1.7262.2.2.8.2.21 | ScalarhzOduHsbOverrideByUser | read-only | mandatory | Indicates the hsb mode is overrided by user. |
| 1.3.6.1.4.1.7262.2.2.8.2.22 | ScalarhzOduHsbOverrideByUserCount | read-only | mandatory | Indicates the time (in secs) since this alarm exist. |
| 1.3.6.1.4.1.7262.2.2.8.2.23 | ScalarhzOduHsbCrossLinkActive | read-only | mandatory | Indicates the hsb cross link is active. |
| 1.3.6.1.4.1.7262.2.2.8.2.24 | ScalarhzOduHsbCrossLinkActiveCount | read-only | mandatory | Indicates the time (in secs) since this alarm exist. |
| 1.3.6.1.4.1.7262.2.2.8.3 | NodehzOduNetworkInterfaceAlarms | |||
| 1.3.6.1.4.1.7262.2.2.8.3.1 | NodehzOduEnetPort1Alarms | |||
| 1.3.6.1.4.1.7262.2.2.8.3.1.1 | ScalarhzOduEnetPort1DroppedEnetFramesThresholdExceeded | read-only | mandatory | The threshold for number of frames dropped has been exceeded. The threshold and the number of seconds that it must exceed this threshold are programmed by the … |
| 1.3.6.1.4.1.7262.2.2.8.3.1.2 | ScalarhzOduEnetPort1DroppedEnetFramesThresholdCount | read-only | mandatory | Indicates the approximate time, in seconds, that this alarm has been in the active state |
| 1.3.6.1.4.1.7262.2.2.8.3.1.3 | ScalarhzOduEnetPort1BandwidthUtilizationThresholdExceeded | read-only | mandatory | The threshold for the percentage of available bandwidth has been exceeded. The threshold and the number of seconds that it must exceed this threshold are progr… |
| 1.3.6.1.4.1.7262.2.2.8.3.1.4 | ScalarhzOduEnetPort1BandwidthUtilizationThresholdCount | read-only | mandatory | Indicates the approximate time, in seconds, that this alarm has been in the active state |
| 1.3.6.1.4.1.7262.2.2.8.3.1.5 | ScalarhzOduEnetPort1RlsMismatch | read-only | mandatory | RLS configurations on the pair of systems are mismatched. |
| 1.3.6.1.4.1.7262.2.2.8.3.1.6 | ScalarhzOduEnetPort1RlsMismatchCount | read-only | mandatory | Indicates the approximate time, in seconds, that this alarm has been in the active state |
| 1.3.6.1.4.1.7262.2.2.8.3.1.7 | ScalarhzOduEnetPort1RLSShutdownActivated | read-only | mandatory | RLS shutdown is activated. |
| 1.3.6.1.4.1.7262.2.2.8.3.1.8 | ScalarhzOduEnetPort1RLSShutdownActivatedCount | read-only | mandatory | Indicates the approximate time, in seconds, that this alarm has been in the active state |
| 1.3.6.1.4.1.7262.2.2.8.3.1.9 | ScalarhzOduEnetPort1EthernetLinkDown | read-only | mandatory | Indicates whether the Ethernet link is down or not. The severity is major, the probable cause is an incorrect configuration of the switch or router connected t… |
| 1.3.6.1.4.1.7262.2.2.8.3.1.10 | ScalarhzOduEnetPort1EthernetLinkDownActivatedCount | read-only | mandatory | Indicates the approximate time, in seconds, that this alarm has been in the active state |
| 1.3.6.1.4.1.7262.2.2.8.3.2 | NodehzOduEnetPort2Alarms | |||
| 1.3.6.1.4.1.7262.2.2.8.3.2.1 | ScalarhzOduEnetPort2EthernetLinkDown | read-only | mandatory | Indicates whether the Ethernet link is down or not. The severity is major, the probable cause is an incorrect configuration of the switch or router connected t… |
| 1.3.6.1.4.1.7262.2.2.8.3.2.2 | ScalarhzOduEnetPort2EthernetLinkDownActivatedCount | read-only | mandatory | Indicates the approximate time, in seconds, that this alarm has been in the active state |
| 1.3.6.1.4.1.7262.2.2.8.4 | NodehzOduWirelessInterfaceAlarms | |||
| 1.3.6.1.4.1.7262.2.2.8.4.4 | NodehzOduModem1Alarms | |||
| 1.3.6.1.4.1.7262.2.2.8.4.4.1 | ScalarhzOduModem1RxLossOfSignal | read-only | mandatory | Loss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of acti… |
| 1.3.6.1.4.1.7262.2.2.8.4.4.2 | ScalarhzOduModem1RxLossOfSignalCount | read-only | mandatory | Indicates the approximate number of seconds that this alarm has been active. |
| 1.3.6.1.4.1.7262.2.2.8.4.4.3 | ScalarhzOduModem1TxLossOfSync | read-only | mandatory | Loss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical interference in the air link, and recommended course… |
| 1.3.6.1.4.1.7262.2.2.8.4.4.4 | ScalarhzOduModem1TxLossOfSyncCount | read-only | mandatory | Indicates the approximate number of seconds that this alarm has been active. |
| 1.3.6.1.4.1.7262.2.2.8.4.4.5 | ScalarhzOduModem1SnrBelowThreshold | read-only | mandatory | The demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misali… |
| 1.3.6.1.4.1.7262.2.2.8.4.4.6 | ScalarhzOduModem1SnrBelowThresholdCount | read-only | mandatory | Indicates the approximate number of seconds that this alarm has been active. |
| 1.3.6.1.4.1.7262.2.2.8.4.4.7 | ScalarhzOduModem1EqualizerStressExceedThreshold | read-only | mandatory | Equalizer Stress measured within the demodulator exceeds the threshold value. |
| 1.3.6.1.4.1.7262.2.2.8.4.4.8 | ScalarhzOduModem1EquilizerStressExceedThresholdCount | read-only | mandatory | Indicates the approximate number of seconds that this alarm has been active. |
| 1.3.6.1.4.1.7262.2.2.8.4.4.9 | ScalarhzOduModem1HardwareFault | read-only | mandatory | |
| 1.3.6.1.4.1.7262.2.2.8.4.4.10 | ScalarhzOduModem1HardwareFaultCount | read-only | mandatory | Indicates the approximate number of seconds that this alarm has been active. |
| 1.3.6.1.4.1.7262.2.2.8.4.4.11 | ScalarhzOduModem1ProgrammingError | read-only | mandatory | Encountered some problem while programming the modem. |
| 1.3.6.1.4.1.7262.2.2.8.4.4.12 | ScalarhzOduModem1ProgrammingErrorCount | read-only | mandatory | Indicates the approximate number of seconds that this alarm has been active. |
| 1.3.6.1.4.1.7262.2.2.8.4.5 | NodehzOduRadio1Alarms | |||
| 1.3.6.1.4.1.7262.2.2.8.4.5.1 | ScalarhzOduRadio1SynthLostLock | read-only | mandatory | Loss of signal lock from IF Synthesizer. |
| 1.3.6.1.4.1.7262.2.2.8.4.5.2 | ScalarhzOduRadio1SynthLostLockCount | read-only | mandatory | Indicates the number of seconds that Loss of signal lock from IF Synthesizer. |
| 1.3.6.1.4.1.7262.2.2.8.4.5.3 | ScalarhzOduRadio1TempCompCalTableNotAvail | read-only | mandatory | Temp comp table not available. |
| 1.3.6.1.4.1.7262.2.2.8.4.5.4 | ScalarhzOduRadio1TempCompCalTableNotAvailCount | read-only | mandatory | Indicates the number of seconds that Temp comp table not available. |
| 1.3.6.1.4.1.7262.2.2.8.4.5.5 | ScalarhzOduRadio1TxDetectorPwrBelowThresh | read-only | mandatory | Tx power detector below threshold 1. |
| 1.3.6.1.4.1.7262.2.2.8.4.5.6 | ScalarhzOduRadio1TxDetectorPwrBelowThreshCount | read-only | mandatory | Indicates the number of seconds that Tx power detector below threshold 1. |
| 1.3.6.1.4.1.7262.2.2.8.4.5.7 | ScalarhzOduRadio1DrainCurrentOutOfLimit | read-only | mandatory | Radio current1 out of limits. |
| 1.3.6.1.4.1.7262.2.2.8.4.5.8 | ScalarhzOduRadio1DrainCurrentOutOfLimitCount | read-only | mandatory | Indicates the number of seconds that Radio current1 out of limits. |
| 1.3.6.1.4.1.7262.2.2.8.4.5.9 | ScalarhzOduRadio1TemperatureOutOfLimit | read-only | mandatory | Radio temperature out of limits. |
| 1.3.6.1.4.1.7262.2.2.8.4.5.10 | ScalarhzOduRadio1TemperatureOutOfLimitCount | read-only | mandatory | Indicates the number of seconds that Radio temperature out of limits. |
| 1.3.6.1.4.1.7262.2.2.9 | NodehzOduTraps | |||
| 1.3.6.1.4.1.7262.2.2.9.1 | TablehzOduSnmpTrapHostTable | not-accessible | mandatory | Table containing SNMP trap host entries. |
| 1.3.6.1.4.1.7262.2.2.9.1.1 | RowhzOduSnmpTrapHostEntry | not-accessible | mandatory | The snmp trap host entry containing all the trap host information |
| 1.3.6.1.4.1.7262.2.2.9.1.1.1 | ColumnhzOduSnmpTrapHostIndex | read-only | mandatory | A unique value for each trap host. |
| 1.3.6.1.4.1.7262.2.2.9.1.1.2 | ColumnhzOduSnmpTrapHostMode | read-only | mandatory | Indicates how the snmp trap host is obtained for the system. |
| 1.3.6.1.4.1.7262.2.2.9.1.1.3 | ColumnhzOduSnmpTrapHostIpAddress | read-only | mandatory | Indicates snmp trap host IP address. |
| 1.3.6.1.4.1.7262.2.2.9.1.1.4 | ColumnhzOduSnmpTrapHostCommunityName | read-only | mandatory | The community string name used in Traps. |
| 1.3.6.1.4.1.7262.2.2.9.1.1.5 | ColumnhzOduSnmpTrapHostActivated | read-only | mandatory | Specifies whether traps are to be sent to this specific host or not |
| 1.3.6.1.4.1.7262.2.2.9.2 | TablehzOduSnmpV3TrapHostsTable | not-accessible | mandatory | Table containing snmp V3 trap host entries |
| 1.3.6.1.4.1.7262.2.2.9.2.1 | RowhzOduSnmpV3TrapHostsEntry | not-accessible | mandatory | Contains the snmp v3 trap host information |
| 1.3.6.1.4.1.7262.2.2.9.2.1.1 | ColumnhzOduSnmpV3TrapHostsIndex | read-only | mandatory | A unique value for each v3 trap host. |
| 1.3.6.1.4.1.7262.2.2.9.2.1.2 | ColumnsnmpV3TrapHostIpAddress | read-only | mandatory | Indicates snmp trap host IP address. |
| 1.3.6.1.4.1.7262.2.2.9.2.1.3 | ColumnsnmpV3TrapHostUserName | read-only | mandatory | The user name of the v3 trap host. |
| 1.3.6.1.4.1.7262.2.2.9.2.1.4 | ColumnsnmpV3TrapHostAuthProtocol | read-only | mandatory | The authentication alogorithm used by the v3 trap host. |
| 1.3.6.1.4.1.7262.2.2.9.2.1.5 | ColumnsnmpV3TrapHostAuthPassword | read-only | mandatory | The authentication password of the v3 trap host. |
| 1.3.6.1.4.1.7262.2.2.9.2.1.6 | ColumnsnmpV3TrapHostPrivProtocol | read-only | mandatory | The privacy encryiption alogorithm used by the v3 trap host. |
| 1.3.6.1.4.1.7262.2.2.9.2.1.7 | ColumnsnmpV3TrapHostPrivPassword | read-only | mandatory | The privacy password of the v3 trap host. |
| 1.3.6.1.4.1.7262.2.2.9.2.1.8 | ColumnsnmpV3TrapHostActivated | read-only | mandatory | Specifies whether a specific v3 trap host is allowed to access the system |
| 1.3.6.1.4.1.7262.2.2.9.3 | ScalarhzOduColdStartTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.3 | NodehzOduExplicitAuthenticationFailureV1Trap | Authentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty… | ||
| 1.3.6.1.4.1.7262.2.2.9.4 | NodehzOduExplicitAuthenticationFailureClearedV1Trap | The condition has cleared. The peer node is now authenticated. | ||
| 1.3.6.1.4.1.7262.2.2.9.4 | ScalarhzOduLinkDownTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.5 | NodehzOduAamConfigMisMatchV1Trap | Adaptive modulation configuration mismatch | ||
| 1.3.6.1.4.1.7262.2.2.9.5 | ScalarhzOduLinkUpTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.6 | NodehzOduAamConfigMisMatchClearV1Trap | Adaptive modulation configuration mismatch cleared | ||
| 1.3.6.1.4.1.7262.2.2.9.6 | ScalarhzOduExplicitAuthenticationFailureTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.7 | NodehzOduAamActiveV1Trap | Adaptive modulation on and system running on lowest modulation | ||
| 1.3.6.1.4.1.7262.2.2.9.7 | ScalarhzOduAamConfigMismatchTrap | read-write | mandatory | Enables or disables the aamConfigMismatch trap. |
| 1.3.6.1.4.1.7262.2.2.9.8 | NodehzOduAamActiveClearedV1Trap | Adaptive modulation on system running on higher modulation | ||
| 1.3.6.1.4.1.7262.2.2.9.8 | ScalarhzOduAamActiveTrap | read-write | mandatory | Enables or disables the aamActive trap. |
| 1.3.6.1.4.1.7262.2.2.9.9 | ScalarhzOduAtpcConfigMismatchTrap | read-write | mandatory | Enables or disables the trap. |
| 1.3.6.1.4.1.7262.2.2.9.9 | NodehzOduAtpcConfigMismatchV1Trap | ATPC is set to on at near end however in the far end it is set to off. | ||
| 1.3.6.1.4.1.7262.2.2.9.10 | NodehzOduAtpcConfigMismatchClearedV1Trap | ATPC configuration mismatch is cleared | ||
| 1.3.6.1.4.1.7262.2.2.9.10 | ScalarhzOduSntpServersUnreachableTrap | read-write | mandatory | Enables or disables the trap. |
| 1.3.6.1.4.1.7262.2.2.9.11 | ScalarhzOduFrequencyFileInvalidTrap | read-write | mandatory | Enables or disables the trap. |
| 1.3.6.1.4.1.7262.2.2.9.11 | NodehzOduSntpServersUnreachableV1Trap | Can't reach any of the sntp servers | ||
| 1.3.6.1.4.1.7262.2.2.9.12 | ScalarhzOduEnetPort1DroppedFramesThresholdExceedTrap | read-write | mandatory | Enables or disables the trap. This trap, if enabled, will be sent when the dropped ethernet frames threshold is exceeded. If enabled, the system will send this… |
| 1.3.6.1.4.1.7262.2.2.9.12 | NodehzOduSntpServersUnreachableClearedV1Trap | At least one of SNTP servers is reachable | ||
| 1.3.6.1.4.1.7262.2.2.9.13 | ScalarhzOduEnetPort1BandwidthUtilizationThresholdExceedTrap | read-write | mandatory | Enables or disables the trap. This trap, if enabled, will be sent when the ethernet bandwidth utilization threshold is exceeded. If enabled, the system will se… |
| 1.3.6.1.4.1.7262.2.2.9.13 | NodehzOduFrequencyFileInvalidV1Trap | When the executing frequency file is invalid, this trap is generated. | ||
| 1.3.6.1.4.1.7262.2.2.9.14 | NodehzOduEnetPort1DroppedFramesThresholdExceededV1Trap | The ethernet dropped frames threshold has been detected above its threshold value. | ||
| 1.3.6.1.4.1.7262.2.2.9.14 | ScalarhzOduEnetPort1RlsMismatchTrap | read-write | mandatory | Enables or disables the trap. |
| 1.3.6.1.4.1.7262.2.2.9.15 | NodehzOduEnetPort1DroppedFramesThresholdExceededClearedV1Trap | The condition has cleared.The ethernet dropped frames threshold is now below its threshold value. | ||
| 1.3.6.1.4.1.7262.2.2.9.15 | ScalarhzOduEnetPort1RLSShutdownActivatedTrap | read-write | mandatory | Enables or disables the trap. |
| 1.3.6.1.4.1.7262.2.2.9.16 | NodehzOduEnetPort1BwUtilizationThresholdExceededV1Trap | The ethernet bandwidth threshold has been detected above its threshold value. | ||
| 1.3.6.1.4.1.7262.2.2.9.16 | ScalarhzOduModem1RxLossOfSignalLockTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.17 | NodehzOduEnetPort1BwUtilizationThresholdExceededClearedV1Trap | The condition has cleared. The ethernet bandwidth threshold is now below its threshold value. | ||
| 1.3.6.1.4.1.7262.2.2.9.17 | ScalarhzOduModem1TxLossOfSyncTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.18 | NodehzOduEnetPort1RlsMismatchV1Trap | RLS mismatch | ||
| 1.3.6.1.4.1.7262.2.2.9.18 | ScalarhzOduModem1SnrBelowThresholdTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.19 | NodehzOduEnetPort1RlsMismatchClearedV1Trap | RLS mismatch cleared | ||
| 1.3.6.1.4.1.7262.2.2.9.19 | ScalarhzOduModem1EqualizerStressExceedThresholdTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.20 | NodehzOduEnetPort1RlsShutdownActivatedv1Trap | RLS shutdown is activated | ||
| 1.3.6.1.4.1.7262.2.2.9.20 | ScalarhzOduModem1ChannelizedRslBelowThresholdTrap | read-write | mandatory | Enables or disables the trap. This trap, if enabled, will be sent when the radio receive signal level threshold is exceeded. If enabled, the system will send t… |
| 1.3.6.1.4.1.7262.2.2.9.21 | NodehzOduEnetPort1RlsShutdownActivatedClearedV1Trap | RLS shutdown is not activated | ||
| 1.3.6.1.4.1.7262.2.2.9.21 | ScalarhzOduModem1HardwareFaultTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.22 | ScalarhzOduModem1ProgrammingErrorTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.22 | NodehzOduModem1RxLossOfSignalLockV1Trap | Loss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of acti… | ||
| 1.3.6.1.4.1.7262.2.2.9.23 | NodehzOduModem1RxLossOfSignalLockClearedV1Trap | The condition has cleared. The demodulator is synchronized. | ||
| 1.3.6.1.4.1.7262.2.2.9.23 | ScalarhzOduRadio1SynthLostLockTrap | read-write | mandatory | Enables or disables the ifSythLostLock trap. |
| 1.3.6.1.4.1.7262.2.2.9.24 | NodehzOduModem1TxLossOfSyncV1Trap | Loss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical interference in the air link, and recommended course… | ||
| 1.3.6.1.4.1.7262.2.2.9.24 | ScalarhzOduRadio1TempCompCalTableNotAvailTrap | read-write | mandatory | Enables or disables the tempCompCalTableNotAvailable trap. |
| 1.3.6.1.4.1.7262.2.2.9.25 | NodehzOduModem1TxLossOfSyncClearedV1Trap | Tx Loss of sync bytes cleared. | ||
| 1.3.6.1.4.1.7262.2.2.9.25 | ScalarhzOduRadio1TxDetectorPwrBelowThreshTrap | read-write | mandatory | Enables or disables the txDetectorPwrBelowThresh trap. |
| 1.3.6.1.4.1.7262.2.2.9.26 | NodehzOduModem1SnrBelowThresholdV1Trap | The demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misali… | ||
| 1.3.6.1.4.1.7262.2.2.9.26 | ScalarhzOduRadio1DrainCurrentOutOfLimitTrap | read-write | mandatory | Enables or disables the radioCurrentOutOfLimitTrap trap. |
| 1.3.6.1.4.1.7262.2.2.9.27 | NodehzOduModem1SnrBelowThresholdClearedV1Trap | SNR performance back to normal. | ||
| 1.3.6.1.4.1.7262.2.2.9.27 | ScalarhzOduRadio1TemperatureOutOfLimitTrap | read-write | mandatory | Enables or disables the radioTemperatureOutOfLimitTrap trap. |
| 1.3.6.1.4.1.7262.2.2.9.28 | NodehzOduModem1EqualizerStressExceedThresholdV1Trap | Equalizer Stress measured within the demodulator exceeds the threshold value. | ||
| 1.3.6.1.4.1.7262.2.2.9.28 | ScalarhzOduTtyManagementSessionCommencedTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.29 | NodehzOduModem1EqualizerStressExceedThresholdClearedV1Trap | Equalizer Stress measured within the demodulator is within the threshold value. | ||
| 1.3.6.1.4.1.7262.2.2.9.29 | ScalarhzOduTtyManagementSessionTerminatedTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.30 | ScalarhzOduAtpcAutoDisabledTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.30 | NodehzOduEnetPort1ChannelizedRslBelowThresholdV1Trap | The RSL has been detected below its minimum threshold. | ||
| 1.3.6.1.4.1.7262.2.2.9.31 | NodehzOduEnetPort1ChannelizedRslBelowThresholdClearedV1Trap | The condition has cleared. RSL is now above its minimum threshold. | ||
| 1.3.6.1.4.1.7262.2.2.9.31 | ScalarhzOduPartnerRedundancyModeMismatchTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.32 | NodehzOduModem1HardwareFaultV1Trap | Power supply circuitry failed. Should be sent for diagnosis. | ||
| 1.3.6.1.4.1.7262.2.2.9.32 | ScalarhzOduPartnerConfigurationMismatchTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.33 | ScalarhzOduHsbActiveOnSecondaryTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.33 | NodehzOduModem1HardwareFaultClearedV1Trap | Power supply circuitry is in good condition. | ||
| 1.3.6.1.4.1.7262.2.2.9.34 | ScalarhzOduHsbOverrideByUserTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.34 | NodehzOduModem1ProgrammingErrorV1Trap | Encountered problem while programming modem. | ||
| 1.3.6.1.4.1.7262.2.2.9.35 | ScalarhzOduHsbCrossLinkTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.35 | NodehzOduModem1ProgrammingErrorClearedrV1Trap | Problem encountered while programming modem is gone. | ||
| 1.3.6.1.4.1.7262.2.2.9.36 | ScalarhzOduHsbActiveOnPrimaryTrap | read-write | mandatory | Specifies whether this trap is to be sent or not |
| 1.3.6.1.4.1.7262.2.2.9.36 | NodehzOduRadio1SynthLostLockV1Trap | IF synth Lock is lost. | ||
| 1.3.6.1.4.1.7262.2.2.9.37 | NodehzOduRadio1SynthLostLockClearedV1Trap | IF synth Lock is lost cleared. | ||
| 1.3.6.1.4.1.7262.2.2.9.38 | NodehzOduRadio1TempCompCalTableNotAvailableV1Trap | Temp comp table not available. | ||
| 1.3.6.1.4.1.7262.2.2.9.39 | NodehzOduRadio1TempCompCalTableNotAvailableClearedV1Trap | Temp comp table not available cleared. | ||
| 1.3.6.1.4.1.7262.2.2.9.40 | NodehzOduRadio1TxDetectorPwrBelowThreshV1Trap | Tx power detector below threshold. | ||
| 1.3.6.1.4.1.7262.2.2.9.41 | NodehzOduRadio1TxDetectorPwrBelowThreshClearedV1Trap | Tx power detector below threshold cleared. | ||
| 1.3.6.1.4.1.7262.2.2.9.42 | NodehzOduRadio1DrainCurrentOutOfLimitV1Trap | Radio current out of limits. | ||
| 1.3.6.1.4.1.7262.2.2.9.43 | NodehzOduRadio1DrainCurrentOutOfLimitClearedV1Trap | Radio current out of limits cleared. | ||
| 1.3.6.1.4.1.7262.2.2.9.44 | NodehzOduRadio1TemperatureOutOfLimitV1Trap | Radio temperature out of limits. | ||
| 1.3.6.1.4.1.7262.2.2.9.45 | NodehzOduRadio1TemperatureOutOfLimitClearedV1Trap | Radio temperature out of limits cleared. | ||
| 1.3.6.1.4.1.7262.2.2.9.46 | NodehzOduTtySessionCommencedV1Trap | A person has successfully gained access to the ascii management port (telnet, local management port, or HTTP). The username is included in the Trap. | ||
| 1.3.6.1.4.1.7262.2.2.9.47 | NodehzOduTtySessionTerminatedV1Trap | A person has logged out of an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap. | ||
| 1.3.6.1.4.1.7262.2.2.9.48 | NodehzOduAtpcTxAtCoordinatedPwrV1Trap | Atpc is enabled in the system and it is transmitting at maximum power. | ||
| 1.3.6.1.4.1.7262.2.2.9.49 | NodehzOduAtpcTxAtCoordinatedPwrClearedV1Trap | Atpc is enabled in the system and it is back to regular power. | ||
| 1.3.6.1.4.1.7262.2.2.9.50 | NodehzOduPartnerRedundancyModeMismatchV1Trap | Hsb partner redundancy mode mismatch. | ||
| 1.3.6.1.4.1.7262.2.2.9.51 | NodehzOduPartnerRedundancyModeMismatchClearedV1Trap | Hsb partner redundancy mode mismatch is cleared. | ||
| 1.3.6.1.4.1.7262.2.2.9.52 | NodehzOduPartnerConfigurationMismatchV1Trap | Hsb partner configuration mismatch. | ||
| 1.3.6.1.4.1.7262.2.2.9.53 | NodehzOduPartnerConfigurationMismatchClearedV1Trap | Hsb partner configuration mismatch is cleared. | ||
| 1.3.6.1.4.1.7262.2.2.9.54 | NodehzOduHsbActiveOnSecondaryV1Trap | Hsb active on secondary. | ||
| 1.3.6.1.4.1.7262.2.2.9.55 | NodehzOduHsbActiveOnSecondaryClearedV1Trap | Hsb active on secondary is cleared. | ||
| 1.3.6.1.4.1.7262.2.2.9.56 | NodehzOduHsbOverrideByUserV1Trap | Hsb override by user. | ||
| 1.3.6.1.4.1.7262.2.2.9.57 | NodehzOduHsbOverrideByUserClearedV1Trap | Hsb active on secondary is cleared. | ||
| 1.3.6.1.4.1.7262.2.2.9.58 | NodehzOduHsbCrossLinkV1Trap | Hsb cross link by user. | ||
| 1.3.6.1.4.1.7262.2.2.9.59 | NodehzOduHsbCrossLinkClearedV1Trap | Hsb cross link is cleared. | ||
| 1.3.6.1.4.1.7262.2.2.9.60 | NodehzOduHsbActiveOnPrimaryV1Trap | Hsb active on primary. | ||
| 1.3.6.1.4.1.7262.2.2.9.61 | NodehzOduHsbActiveOnPrimaryClearedV1Trap | Hsb active on primary is cleared. | ||
| 1.3.6.1.4.1.7262.2.2.10 | NodehzOduSnmp | |||
| 1.3.6.1.4.1.7262.2.2.10.1 | ScalarhzOduSnmpUserAccess | read-only | mandatory | Specifies the user access to the system.If access is set to managers then only managers with there ip addresses set in snmpManagersTable will be able to gain s… |
| 1.3.6.1.4.1.7262.2.2.10.2 | ScalarhzOduSnmpManagerAnyCommunityName | read-only | mandatory | The community string name used by the 'any' manager. |
| 1.3.6.1.4.1.7262.2.2.10.3 | ScalarhzOduSnmpSetRequests | read-only | mandatory | Indicates whether SNMP SET requests are allowed. |
| 1.3.6.1.4.1.7262.2.2.10.4 | TablehzOduSnmpManagersTable | not-accessible | mandatory | Table containing snmp manager entries |
| 1.3.6.1.4.1.7262.2.2.10.4.1 | RowhzOduSnmpManagersEntry | not-accessible | mandatory | Contains the snmp manager information |
| 1.3.6.1.4.1.7262.2.2.10.4.1.1 | ColumnhzOduSnmpManagersIndex | read-only | mandatory | A unique value for each manager. |
| 1.3.6.1.4.1.7262.2.2.10.4.1.2 | ColumnhzOduSnmpManagerIpAddress | read-only | mandatory | The IP address of the Manager. |
| 1.3.6.1.4.1.7262.2.2.10.4.1.3 | ColumnhzOduSnmpManagerCommunityName | read-only | mandatory | The community string name used by the manager. |
| 1.3.6.1.4.1.7262.2.2.10.4.1.4 | ColumnhzOduSnmpManagerActivated | read-only | mandatory | Specifies whether a specific manager is allowed to access the system |
| 1.3.6.1.4.1.7262.2.2.10.5 | TablehzOduSnmpV3ManagersTable | not-accessible | mandatory | Table containing snmp V3 manager entries |
| 1.3.6.1.4.1.7262.2.2.10.5.1 | RowhzOduSnmpV3ManagersEntry | not-accessible | mandatory | Contains the snmp v3 manager information |
| 1.3.6.1.4.1.7262.2.2.10.5.1.1 | ColumnhzOduSnmpV3ManagersIndex | read-only | mandatory | A unique value for each v3 manager. |
| 1.3.6.1.4.1.7262.2.2.10.5.1.2 | ColumnhzOduSnmpV3ManagerUserName | read-only | mandatory | The user name of the v3 Manager. |
| 1.3.6.1.4.1.7262.2.2.10.5.1.3 | ColumnhzOduSnmpV3ManagerAuthProtocol | read-only | mandatory | The authentication alogorithm used by the v3 manager. |
| 1.3.6.1.4.1.7262.2.2.10.5.1.4 | ColumnhzOduSnmpV3ManagerAuthPassword | read-only | mandatory | The authentication password of the v3 Manager. |
| 1.3.6.1.4.1.7262.2.2.10.5.1.5 | ColumnhzOduSnmpV3ManagerPrivProtocol | read-only | mandatory | The privacy encryiption alogorithm used by the v3 manager. |
| 1.3.6.1.4.1.7262.2.2.10.5.1.6 | ColumnhzOduSnmpV3ManagerPrivPassword | read-only | mandatory | The privacy password of the v3 Manager. |
| 1.3.6.1.4.1.7262.2.2.10.5.1.7 | ColumnhzOduSnmpV3ManagerActivated | read-only | mandatory | Specifies whether a specific v3 manager is allowed to access the system |
| 1.3.6.1.4.1.7262.2.2.11 | NodehzOduManagementSessions | |||
| 1.3.6.1.4.1.7262.2.2.11.1 | NodehzOduTtySessionUser1 | |||
| 1.3.6.1.4.1.7262.2.2.11.1.1 | ScalarhzOduTtySessionUser1Name | read-only | mandatory | The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in pr… |
| 1.3.6.1.4.1.7262.2.2.11.1.2 | ScalarhzOduTtySessionUser1ConnectionType | read-only | mandatory | The physical port used to log in to the system. The serial port is always local to the equipment. The 10BaseT connector may be local, or remote, depending on i… |
| 1.3.6.1.4.1.7262.2.2.11.1.3 | ScalarhzOduTtySessionUser1State | read-only | mandatory | The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of th… |
| 1.3.6.1.4.1.7262.2.2.11.2 | NodehzOduTtySessionUser2 | |||
| 1.3.6.1.4.1.7262.2.2.11.2.1 | ScalarhzOduTtySessionUser2Name | read-only | mandatory | The username of a person currently logged in to the system using Telnet or HTTP. This can be in-band or the side 10BT channel, if supported on this system. |
| 1.3.6.1.4.1.7262.2.2.11.2.2 | ScalarhzOduTtySessionUser2ConnectionType | read-only | mandatory | The physical port used to log in to the system. The serial port is always local to the equipment. The 10BaseT connector may be local, or remote, depending on i… |
| 1.3.6.1.4.1.7262.2.2.11.2.3 | ScalarhzOduTtySessionUser2State | read-only | mandatory | The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of th… |
| 1.3.6.1.4.1.7262.2.2.11.3 | NodehzOduTtySessionUser3 | |||
| 1.3.6.1.4.1.7262.2.2.11.3.1 | ScalarhzOduTtySessionUser3Name | read-only | mandatory | The username of a person currently logged in to the system using Telnet or HTTP. This can be in-band or the side 10BT channel, if supported on this system. |
| 1.3.6.1.4.1.7262.2.2.11.3.2 | ScalarhzOduTtySessionUser3ConnectionType | read-only | mandatory | The physical port used to log in to the system. The serial port is always local to the equipment. The 10BaseT connector may be local, or remote, depending on i… |
| 1.3.6.1.4.1.7262.2.2.11.3.3 | ScalarhzOduTtySessionUser3State | read-only | mandatory | The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of th… |
| 1.3.6.1.4.1.7262.2.2.11.4 | NodehzOduTtySessionUser4 | |||
| 1.3.6.1.4.1.7262.2.2.11.4.1 | ScalarhzOduTtySessionUser4Name | read-only | mandatory | The username of a person currently logged in to the system using Telnet or HTTP. This can be in-band or the side 10BT channel, if supported on this system. |
| 1.3.6.1.4.1.7262.2.2.11.4.2 | ScalarhzOduTtySessionUser4ConnectionType | read-only | mandatory | The physical port used to log in to the system. The serial port is always local to the equipment. The 10BaseT connector may be local, or remote, depending on i… |
| 1.3.6.1.4.1.7262.2.2.11.4.3 | ScalarhzOduTtySessionUser4State | read-only | mandatory | The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of th… |
| 1.3.6.1.4.1.7262.2.2.11.5 | NodehzOduTtySessionUser5 | |||
| 1.3.6.1.4.1.7262.2.2.11.5.1 | ScalarhzOduTtySessionUser5Name | read-only | mandatory | The username of a person currently logged in to the system using Telnet or HTTP. This can be in-band or the side 10BT channel, if supported on this system. |
| 1.3.6.1.4.1.7262.2.2.11.5.2 | ScalarhzOduTtySessionUser5ConnectionType | read-only | mandatory | The physical port used to log in to the system. The serial port is always local to the equipment. The 10BaseT connector may be local, or remote, depending on i… |
| 1.3.6.1.4.1.7262.2.2.11.5.3 | ScalarhzOduTtySessionUser5State | read-only | mandatory | The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of th… |
| 1.3.6.1.4.1.7262.2.2.11.6 | NodehzOduTtySessionUser6 | |||
| 1.3.6.1.4.1.7262.2.2.11.6.1 | ScalarhzOduTtySessionUser6Name | read-only | mandatory | The username of a person currently logged in to the system using Telnet or HTTP. This can be in-band or the side 10BT channel, if supported on this system. |
| 1.3.6.1.4.1.7262.2.2.11.6.2 | ScalarhzOduTtySessionUser6ConnectionType | read-only | mandatory | The physical port used to log in to the system. The serial port is always local to the equipment. The 10BaseT connector may be local, or remote, depending on i… |
| 1.3.6.1.4.1.7262.2.2.11.6.3 | ScalarhzOduTtySessionUser6State | read-only | mandatory | The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of th… |
| 1.3.6.1.4.1.7262.2.2.11.7 | NodehzOduSessionUserInformation | |||
| 1.3.6.1.4.1.7262.2.2.11.7.1 | ScalarhzOduTtySessionUserName | read-only | mandatory | NOT IMPLEMENTED. Object type placeholder for username string for SNMP traps. The username of a person currently logged in to the system using Telnet or HTTP. T… |
| 1.3.6.1.4.1.7262.2.2.11.7.2 | ScalarhzOduTtySessionUserConnectionType | read-only | mandatory | NOT IMPLEMENTED. Object type placeholder for connection type for SNMP traps. The physical port used to log in to the system. The serial port is always local to… |
| 1.3.6.1.4.1.7262.2.2.12 | NodehzOduHttp | |||
| 1.3.6.1.4.1.7262.2.2.12.1 | ScalarhzOduHttpEnable | read-write | mandatory | Indicates whether HTTP is enabled. |
| 1.3.6.1.4.1.7262.2.2.12.2 | NodehzOduHttpSecure | |||
| 1.3.6.1.4.1.7262.2.2.12.2.1 | ScalarhzOduHttpSecureCertificateStatus | read-only | mandatory | Returns the HTTPS certificate status |
| 1.3.6.1.4.1.7262.2.2.12.2.2 | ScalarhzOduHttpSecureAccessForAdminUsers | read-write | mandatory | the HTTPS access requirement for Admin user group. |
| 1.3.6.1.4.1.7262.2.2.12.2.3 | ScalarhzOduHttpSecureAccessForNocUsers | read-write | mandatory | the HTTPS access requirement for Noc user group. |
| 1.3.6.1.4.1.7262.2.2.12.2.4 | ScalarhzOduHttpSecureAccessForSuperUsers | read-write | mandatory | the HTTPS access requirement for Super user group. |
| 1.3.6.1.4.1.7262.2.2.13 | NodehzOduQos | |||
| 1.3.6.1.4.1.7262.2.2.13.1 | ScalarhzOduQosEnable | read-write | mandatory | Indicates whether QOS is enabled. |
| 1.3.6.1.4.1.7262.2.2.13.2 | ScalarhzOduCosType | read-write | mandatory | Indicates the class of service tag type. Based on the setting Horizon will use the CoS value in the VLAN tag, or Q-in-Q inner VLAN tag, Q-in-Q outer VLAN tag, … |
| 1.3.6.1.4.1.7262.2.2.13.3 | ScalarhzOduCoSQinQiTag | read-write | mandatory | Sets the value of the Q-in-Q inner tag. This tag is also used to classify the non-Q-in-Q VLAN. Default value is 0x8100. |
| 1.3.6.1.4.1.7262.2.2.13.4 | ScalarhzOduCoSQinQoTag | read-write | mandatory | Sets the value of the Q-in-Q outer VLAN tag. Default value is 0x8100. |
| 1.3.6.1.4.1.7262.2.2.13.5 | ScalarhzOduCosQueueMapping | read-write | mandatory | User queue assignments for CoS values 0 to 7. There are 4 coS queues. Their corresponding queue numbers are 1,2, 3, where 1 is the lowest priority queue and 4 … |
| 1.3.6.1.4.1.7262.2.2.13.6 | ScalarhzOduCosExpediteQueue | read-write | mandatory | This sets the user queue operation mode. (a) In expedite mode, any Queue can be assigned 100% of CIR. Queue 4 is serviced first and queue 1 is servcied last.(b… |
| 1.3.6.1.4.1.7262.2.2.13.7 | ScalarhzOduCosQueueCIR | read-write | mandatory | Committeed Information Rate (CIR) assignments for CoS queues 1 to 4. CIR is assigned as the percentage of system current speed. When expedite queue is enabled … |
| 1.3.6.1.4.1.7262.2.2.13.8 | ScalarhzOduCosQueueCBS | read-write | mandatory | Comitted Burst Size (CBS) for CoS queues 1 to 4. CBS is the percentage of total packet buffer size. The sum of CBS's of all 4 queues must be equal to 100. Mini… |
| 1.3.6.1.4.1.7262.2.2.13.9 | ScalarhzOduCosDefaultValue | read-write | mandatory | Default CoS value assigned to the ethernet frames that don't have VLAN or Q-in-Q tag. |
| 1.3.6.1.4.1.7262.2.2.13.10 | ScalarhzOduCutThroughProcessing | read-write | mandatory | Sets cut through processing on/off. |
| 1.3.6.1.4.1.7262.2.2.14 | NodehzOduRapidLinkShutdown | |||
| 1.3.6.1.4.1.7262.2.2.14.1 | NodehzOduRapidLinkShutdownVer1 | |||
| 1.3.6.1.4.1.7262.2.2.14.1.1 | ScalarhzOduRlsEnable | read-write | mandatory | <deprecated> The Rapid Link Shutdown feature: enabled or disabled. Changing this option requires a system reset. |
| 1.3.6.1.4.1.7262.2.2.14.1.2 | ScalarhzOduAutomaticLinkReestablish | read-write | mandatory | <deprecated> If this feature is enabled, the link will be automatically reestablished. If this feature is disabled, the user must explicitly use the manualRees… |
| 1.3.6.1.4.1.7262.2.2.14.1.3 | ScalarhzOduManualLinkReestablish | read-write | mandatory | <deprecated> This object is writeable ONLY if automaticLinkReestablish is set to disabled. The user explicitly brings the link back up by setting this object t… |
| 1.3.6.1.4.1.7262.2.2.14.1.4 | ScalarhzOduHysterisisErredFramesPerMilliSecond | read-write | mandatory | <deprecated> The link will be automatically shut down when this number of erred modem frames threshold is exceeded during the time set in the hysterisisErredMi… |
| 1.3.6.1.4.1.7262.2.2.14.1.5 | ScalarhzOduHysterisisErredMilliSeconds | read-write | mandatory | <deprecated> The time to determine a link that has excessive errors. The link will be automatically shut down when this number of milliseconds experiences the … |
| 1.3.6.1.4.1.7262.2.2.14.1.6 | ScalarhzOduHysterisisUnerredFramesPerMilliSecond | read-write | mandatory | <deprecated> The link will be automatically brought back up when the number of erred modem frames is less than this value ( only if automaticLinkReestablish is… |
| 1.3.6.1.4.1.7262.2.2.14.1.7 | ScalarhzOduHysterisisUnerredMilliSeconds | read-write | mandatory | <deprecated> The time block to use to determine if the link is error free enough to warrant it to automatically reestablish itself ( only if automaticLinkReest… |
| 1.3.6.1.4.1.7262.2.2.14.1.8 | ScalarhzOduWriteRlsMonitorParametersToSystem | read-write | mandatory | <deprecated> This writes the following parameters to RAM: hysterisisErredFramesPerMilliSecond, hysterisisErredMilliSeconds, hysterisisUnerredFramesPerMilliSeco… |
| 1.3.6.1.4.1.7262.2.2.14.1.9 | ScalarhzOduRlsSampleTimeInMilliSeconds | read-write | mandatory | <deprecated> |
| 1.3.6.1.4.1.7262.2.2.14.2 | NodehzOduRapidLinkShutdownVer2 | |||
| 1.3.6.1.4.1.7262.2.2.14.2.1 | ScalarhzOduPrimaryRlsEnable | read-write | mandatory | The Rapid Link Shutdown feature: enabled or disabled. Changing this option requires a system reset. |
| 1.3.6.1.4.1.7262.2.2.14.2.2 | ScalarhzOduPrimaryRlsHardFaultMonitor | read-write | mandatory | This object has changed - Enable the rlsHardFaultMonitor for rapid detection of severely degrade link. When disabled the only the RLS Link Degrade Monitor is u… |
| 1.3.6.1.4.1.7262.2.2.14.2.3 | ScalarhzOduPrimaryAutomaticLinkReestablish | read-write | mandatory | If this feature is enabled, the link will be automatically reestablished If this feature is disabled, the user must explicitly use the manualReestablish object… |
| 1.3.6.1.4.1.7262.2.2.14.2.4 | ScalarhzOduPrimaryManualLinkReestablish | read-write | mandatory | This object is writeable ONLY if automaticLinkReestablish is set to disabled. The user explicitly brings the link back up by setting this object to enabled. Th… |
| 1.3.6.1.4.1.7262.2.2.14.2.5 | ScalarhzOduWritePrimaryRlsMonitorParametersToSystem | read-write | mandatory | This object has changed - This writes RLS soft and hard fault monitor parameters to RAM Reading this object returns '1'. |
| 1.3.6.1.4.1.7262.2.2.14.2.6 | NodehzOduPrimarySoftFaultMonitor | |||
| 1.3.6.1.4.1.7262.2.2.14.2.6.1 | ScalarhzOduPrimaryEstablishErredFrameThreshold | read-write | mandatory | Maximum erred blocks, per sample, allowed for link establishment. |
| 1.3.6.1.4.1.7262.2.2.14.2.6.2 | ScalarhzOduPrimaryShutdownErredFrameThreshold | read-write | mandatory | Minimum erred blocks, per sample, allowed before link shutdown. |
| 1.3.6.1.4.1.7262.2.2.14.2.6.3 | ScalarhzOduPrimaryEstablishNumberOfSamples | read-write | mandatory | Minimum number of consecutive good samples required before link is established. |
| 1.3.6.1.4.1.7262.2.2.14.2.6.4 | ScalarhzOduPrimaryShutdownNumberOfSamples | read-write | mandatory | Minimum number of consecutive erred samples before link is shutdown. |
| 1.3.6.1.4.1.7262.2.2.14.2.6.5 | ScalarhzOduPrimaryEstablishSamplePeriod | read-write | mandatory | Period of Time, in milliseconds, for monitoring Establish Erred Frame Threshold. |
| 1.3.6.1.4.1.7262.2.2.14.2.6.6 | ScalarhzOduPrimaryShutdownSamplePeriod | read-write | mandatory | Period of Time, in milliseconds, for monitoring Shutdown Erred Frame Threshold. |
| 1.3.6.1.4.1.7262.2.2.14.2.6.7 | ScalarhzOduPrimaryQuickShutdownSamplePeriod | read-write | mandatory | Minimum number of milliseconds required to classify samples as erred. |
| 1.3.6.1.4.1.7262.2.2.14.2.7 | NodehzOduPrimaryHardFaultMonitor | |||
| 1.3.6.1.4.1.7262.2.2.14.2.7.1 | ScalarhzOduPrimaryFaultSamplePeriod | read-write | mandatory | The period of time, in milliseconds, for which the rlsFaultThreshold is applied. |
| 1.3.6.1.4.1.7262.2.2.14.2.7.2 | ScalarhzOduPrimaryFaultThreshold | read-write | mandatory | The percentage of the rlsFaultSamplePeriodMilliSeconds period which must be degraded before the link is set to the 'impaired' state. |
| 1.3.6.1.4.1.7262.2.2.14.2.8 | NodehzOduPrimaryReceiveSignalLevelMonitor | |||
| 1.3.6.1.4.1.7262.2.2.14.2.8.1 | ScalarhzOduPrimaryRlsMakeRslMonitorRslValue | read-write | mandatory | The RSL threshold, in dBm. When Link is inactive and if RSL is higher than this threshold for a desired period, the link will become active. |
| 1.3.6.1.4.1.7262.2.2.14.2.8.2 | ScalarhzOduPrimaryRlsMakeRslMonitorPeriod | read-write | mandatory | The desired period, in seconds. When Link is inactive and if RSL is higher than the desired threshold for this period, the link will become active. |
| 1.3.6.1.4.1.7262.2.2.14.2.9 | NodehzOduPrimaryRlsStatus | |||
| 1.3.6.1.4.1.7262.2.2.14.2.9.1 | ScalarhzOduPrimaryRlsOption | read-only | mandatory | RLS Option. On Basic: RLS enabled with base degrade monitoring; On Advanced: RLS enabled with hard fault monitoring; Off: Entire RLS feature disabled. |
| 1.3.6.1.4.1.7262.2.2.14.2.9.2 | ScalarhzOduPrimaryRlsState | read-only | mandatory | Rapid Link Shutdown State. If the state is activated, that means link is down; If the state is inactivated, that means that link is up. |
| 1.3.6.1.4.1.7262.2.2.14.2.9.3 | ScalarhzOduPrimaryRlsMismatchState | read-only | mandatory | RLS Mismatch State. If the state is activated, that means RLS configuration is mismatched with peer. If the state is OK, that means RLS configuration is matche… |
| 1.3.6.1.4.1.7262.2.2.14.2.9.4 | ScalarhzOduPrimaryDegradeMonitorState | read-only | mandatory | Degrade Monitor State. If the state is activated, that means the RLS Degrade Monitor is asserting the link down. If the state is OK, that means the RLS Degrade… |
| 1.3.6.1.4.1.7262.2.2.14.2.9.5 | ScalarhzOduPrimaryHardFaultMonitorState | read-only | mandatory | Hard Fault Monitor State. If the state is activated, that means the Hard Fault Monitor is asserting the link down. If the state is OK, that means the RLS Hard … |
| 1.3.6.1.4.1.7262.2.2.14.2.9.6 | ScalarhzOduPrimaryMakeRslThresholdState | read-only | mandatory | Make RSL Threshold State. If the state is not met, that means the RLS signal level is below the threshold value. If the state is OK, that means the RLS signal … |
| 1.3.6.1.4.1.7262.2.2.14.2.9.7 | ScalarhzOduPrimaryPeerRslState | read-only | mandatory | Peer RSL State. If the state is activated, that means the peer has activated RLS. If the state is OK, that means the Peer hasn't activated RLS. |
| 1.3.6.1.4.1.7262.2.2.14.2.9.8 | ScalarhzOduPrimaryRadioInterfaceState | read-only | mandatory | Radio Interface State. If the state is down, that means The radio interface is not operational(muted,disconnected, not configured). If the state is up, that me… |
| 1.3.6.1.4.1.7262.2.2.14.2.9.9 | ScalarhzOduPrimaryNetworkInterfaceState | read-only | mandatory | Network Interface State. If the state is down, that means the network interface (Ethernet/PHY) is not operational(disconnected, not configured). If the state i… |
| 1.3.6.1.4.1.7262.2.2.14.2.9.10 | ScalarhzOduPrimaryUserConfiguredEstablishFer | read-only | mandatory | User Configured Establish Frame Error Ratio required for the link to be restored to service, set by the user. An example value being '1.0E-7'. |
| 1.3.6.1.4.1.7262.2.2.14.2.9.11 | ScalarhzOduPrimaryMinimumAchievableEstablishFer | read-only | mandatory | Minimum achievable Frame Error Ratio required for the link to be restored to service. An example value being '1.0E-7'. |
| 1.3.6.1.4.1.7262.2.2.14.2.9.12 | ScalarhzOduPrimaryUserConfiguredShutdownFer | read-only | mandatory | User Configured Shutdown Frame Error Ratio required for the link to remain in-service, set by the user. An example value being '1.0E-7'. |
| 1.3.6.1.4.1.7262.2.2.14.2.9.13 | ScalarhzOduPrimaryMinimumAchievableShutdownFer | read-only | mandatory | Minimum achievable Frame Error Ratio required for the link to remain in-service. An example value being '1.0E-7'. |
| 1.3.6.1.4.1.7262.2.2.14.2.9.14 | ScalarhzOduPrimaryUserConfiguredEstablishMonitorTime | read-only | mandatory | User Configured Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER' must be achieved to bring link into service, set by user |
| 1.3.6.1.4.1.7262.2.2.14.2.9.15 | ScalarhzOduPrimaryActualEstablishMonitorTime | read-only | mandatory | Actual Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER' must be achieved to bring link into service, it's a multiple of t… |
| 1.3.6.1.4.1.7262.2.2.14.2.9.16 | ScalarhzOduPrimaryUserConfiguredShutdownMonitorTime | read-only | mandatory | User Configured Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, set by user. |
| 1.3.6.1.4.1.7262.2.2.14.2.9.17 | ScalarhzOduPrimaryActualShutdownMonitorTime | read-only | mandatory | Actual Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, it's a multiple of t… |
| 1.3.6.1.4.1.7262.2.2.15 | NodehzOduSntp | |||
| 1.3.6.1.4.1.7262.2.2.15.1 | ScalarhzOduSntpEnable | read-write | mandatory | Indicates whether SNTP feature is enabled. |
| 1.3.6.1.4.1.7262.2.2.15.2 | ScalarhzOduSntpOffset | read-write | mandatory | System time offset from GMT. |
| 1.3.6.1.4.1.7262.2.2.15.3 | TablehzOduSntpServerTable | not-accessible | mandatory | Table containing sntp server entries |
| 1.3.6.1.4.1.7262.2.2.15.3.1 | RowhzOduSntpServerEntry | not-accessible | mandatory | Contains the sntp server information |
| 1.3.6.1.4.1.7262.2.2.15.3.1.1 | ColumnhzOduSntpServerIndex | read-only | mandatory | A unique value for each server. |
| 1.3.6.1.4.1.7262.2.2.15.3.1.2 | ColumnhzOduSntpServerIpAddress | read-write | mandatory | The IP address of the server. |
| 1.3.6.1.4.1.7262.2.2.15.3.1.3 | ColumnhzOduSntpServerStatus | read-only | mandatory | The status of the sntp server. |
| 1.3.6.1.4.1.7262.2.2.15.3.1.4 | ColumnhzOduSntpServerStratum | read-only | mandatory | Specifies the stratum of a server, 0 for failed server |
| 1.3.6.1.4.1.7262.2.2.16 | NodehzOduLogs | |||
| 1.3.6.1.4.1.7262.2.2.16.1 | ScalarhzOduEventLogEnable | read-write | mandatory | Indicates whether event log is enabled. |
| 1.3.6.1.4.1.7262.2.2.16.2 | ScalarhzOduPerfmLogEnable | read-write | mandatory | Indicates whether performance log is enabled. |
| 1.3.6.1.4.1.7262.2.2.16.3 | ScalarhzOduPerfmLogInterval | read-write | mandatory | Performance statistics are logged periodically by this interval. |
| 1.3.6.1.4.1.7262.2.2.17 | NodehzOduRadius | |||
| 1.3.6.1.4.1.7262.2.2.17.1 | ScalarhzOduRadiusSuperUserAuthentication | read-write | mandatory | The set strict mode on or off |
| 1.3.6.1.4.1.7262.2.2.17.2 | ScalarhzOduRadiusServerTimeOut | read-only | mandatory | Timeout period for authentication requests |
| 1.3.6.1.4.1.7262.2.2.17.3 | ScalarhzOduRadiusServerDeadTime | read-only | mandatory | Time to declare an unresponsive server 'dead' |
| 1.3.6.1.4.1.7262.2.2.17.4 | ScalarhzOduRadiusServerReTransmit | read-only | mandatory | Maximum number of retransmits to an unresponsive server |
| 1.3.6.1.4.1.7262.2.2.17.5 | TablehzOduRadiusServerTable | not-accessible | mandatory | Table containing radius server entries |
| 1.3.6.1.4.1.7262.2.2.17.5.1 | RowhzOduRadiusServerEntry | not-accessible | mandatory | Contains the sntp server information |
| 1.3.6.1.4.1.7262.2.2.17.5.1.1 | ColumnhzOduRadiusServerIndex | read-only | mandatory | A unique value for each server. |
| 1.3.6.1.4.1.7262.2.2.17.5.1.2 | ColumnhzOduRadiusCfgdHostIpAddress | read-write | mandatory | The IP address of the configured radius server. |
| 1.3.6.1.4.1.7262.2.2.17.5.1.3 | ColumnhzOduRadiusActiveHostIpAddress | read-only | mandatory | The IP address of the active radius server. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysAddress | OCTET STRING |