HOTWIRE-XDSL-INTERFACE-MIB
135 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.8.1 | NodexdslDevice | |||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1 | NodexdslDevIfStats | |||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1 | NodexdslLinkUpDownTransitions | This trap signifies that the sending protocol entity recognizes that one of the xDSL communication links is in a fluctuating state. This is a trap of 'minor' c… | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1 | TablexdslDevIfIntervalStatsTable | not-accessible | mandatory | The xdslIfStatsTable provides statistics specific to the xDSL link. Statistics are collected on a per port basis and on specified intervals. Hence as such this… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1 | RowxdslDevIfIntervalStatsEntry | not-accessible | mandatory | Describes a specific xDSL satistics entry. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.1 | ColumnxdslDevIfStatsIfIndex | read-only | mandatory | The value of this object corresponds directly to each DSL interface as described in ifTable. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.2 | ColumnxdslDevIfStatsInterval | read-only | mandatory | The value of this object corresponds to the interval of time during which statistics were collected. previousDay(32) will have the statistics collected from 12… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.3 | ColumnxdslDevIfStatsValid15MinuteIntervalCount | read-only | mandatory | Reflects the number of 15 minute intervals during which link was up and statistics were received from the remote end |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.4 | ColumnxdslDevIfStatsElapsedTimeLinkUp | read-only | mandatory | Reflects the elapsed time since the link was up. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.5 | ColumnxdslDevIfStatsLinkDownCount | read-only | mandatory | Reflects the number of times that the xDSL link has gone to a down state. This may be due to shutting down of the customers side of the link. It could also be … |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.6 | ColumnxdslDevIfStatsUpStreamSpeed | read-only | mandatory | The speed in the upstream (from the remote to the central site) direction. This object compliments the ifSpeed object in the ifTable which represents the speed… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.7 | ColumnxdslDevIfStatsCentralReceiverGain | read-only | mandatory | Reflects the receiver gain at the central site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.8 | ColumnxdslDevIfStatsCentralRecMargin | read-only | mandatory | Reflects the margin at the central site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.9 | ColumnxdslDevIfStatsCentralRecAttenuationEstimate | read-only | mandatory | Reflects the attenuation estimate at the central site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.10 | ColumnxdslDevIfStatsCentralRecTransmitPower | read-only | mandatory | Reflects the transmit power at the central site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.11 | ColumnxdslDevIfStatsCentralRecErrorRate | read-only | mandatory | Reflects the error rate at the central site. This string will represent a floating point number of the form. [ErrRate][eE][+-][ErrRateBase] where ErrRate and E… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.12 | ColumnxdslDevIfStatsCentralRecErroredSeconds | read-only | mandatory | Reflects the errored seconds at the central site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.13 | ColumnxdslDevIfStatsCentralRecSeverelyErroredSeconds | read-only | mandatory | Reflects the severely errored seconds at the central site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.14 | ColumnxdslDevIfStatsRemoteReceiverGain | read-only | mandatory | Reflects the receiver gain at the remote site |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.15 | ColumnxdslDevIfStatsRemoteRecMargin | read-only | mandatory | Reflects the margin at the remote site |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.16 | ColumnxdslDevIfStatsRemoteRecAttenuationEstimate | read-only | mandatory | Reflects the attenuation estimate at the remote site |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.17 | ColumnxdslDevIfStatsRemoteRecTransmitPower | read-only | mandatory | Reflects the transmit power at the remote site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.18 | ColumnxdslDevIfStatsRemoteRecErrorRate | read-only | mandatory | Reflects the error rate at the remote site. This string will represent a floating point number of the form a.b. [ErrRate][eE][+-][ErrRateBase] where ErrRate an… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.19 | ColumnxdslDevIfStatsRemoteRecErroredSeconds | read-only | mandatory | Reflects the errored seconds at the remote site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.20 | ColumnxdslDevIfStatsRemoteRecSeverelyErroredSeconds | read-only | mandatory | Reflects the severely errored seconds at the remote site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.21 | ColumnxdslDevIfStatsRemoteOctetsCorrected | read-only | mandatory | This object reflects the number of octets corrected when reed-solomon is turned on at the remote site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.22 | ColumnxdslDevIfStatsRemoteOctetsNotCorrected | read-only | mandatory | This object reflects the number of octets not corrected when reed-solomon is turned on at the remote site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.23 | ColumnxdslDevIfStatsRemoteReceivedKiloOctets | read-only | mandatory | The number of octets that have been received by the xDSL interface at the remote site divided by 1000. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.24 | ColumnxdslDevIfStatsRemoteReceivedPkts | read-only | mandatory | The number of good packets that have been received by the xDSL interface at the remote site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.25 | ColumnxdslDevIfStatsRemoteRecErrPkts | read-only | mandatory | Reflects the number packet receive with error by the xDSL interface at the remote site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.26 | ColumnxdslDevIfStatsRemoteDroppedPkts | read-only | mandatory | Reflects the number of good packets that have been received by the xDSL interface at the remote site, but have been dropped due to insufficient buffer capacity. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.27 | ColumnxdslDevIfStatsRemoteTransmittedKiloOctets | read-only | mandatory | The number of octets that have been transmitted by the xDSL interface at the remote site divided by 1000. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.28 | ColumnxdslDevIfStatsRemoteTransmittedPkts | read-only | mandatory | The number of pkts that have been transmitted by the xDSL interface at the remote site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.29 | ColumnxdslDevIfStatsCentralRecErroredMinutes | read-only | mandatory | Reflects the errored minutes at the central site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.30 | ColumnxdslDevIfStatsCentralRecSeverelyErroredMinutes | read-only | mandatory | Reflects the severely errored minutes at the central site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.31 | ColumnxdslDevIfStatsRemoteRecErroredMinutes | read-only | mandatory | Reflects the errored minutes at the remote site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.32 | ColumnxdslDevIfStatsRemoteRecSeverelyErroredMinutes | read-only | mandatory | Reflects the severely errored minutes at the remote site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.33 | ColumnxdslDevIfStatsCentralReceivedKiloOctets | read-only | mandatory | The number of octets that have been received by the xDSL interface at the central site divided by 1000. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.34 | ColumnxdslDevIfStatsCentralTransmittedKiloOctets | read-only | mandatory | The number of octets that have been transmitted by the xDSL interface at the central site divided by 1000. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.35 | ColumnxdslDevIfStatsCentralTransmittedPkts | read-only | mandatory | The number of packets that have been transmitted by the xDSL interface at the central site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.36 | ColumnxdslDevIfStatsCentralReceivedPkts | read-only | mandatory | The number of packets that have been received by the xDSL interface at the central site. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.37 | ColumnxdslDevIfStatsCentralErrPkts | read-only | mandatory | The number of packets that have been received by the xDSL interface at the central site with error. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2 | NodexdslDevIfConfig | |||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2 | NodexdslPortSpeedLow | This trap signifies that the port speed of the xDSL link has dropped below a threshold value. This is a trap of 'warning' class | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1 | TablexdslDevIfConfigTable | not-accessible | mandatory | The xdslDevIfConfigTable provides config information specific to a xDSL device, or system. The table is indexed by an object which corresponds to ifIndex. Thes… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1 | RowxdslDevIfConfigEntry | not-accessible | mandatory | Describes a specific xDSL interface entry. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.1 | ColumnxdslDevIfConfigIfIndex | read-only | mandatory | The value of this object corresponds directly to each xDSL interface as described in ifTable. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.2 | ColumnxdslDevIfConfigPortSpeedBehaviour | read-write | mandatory | The value of this object corresponds to the behaviour of the specified port. The default value for this object is fixed (1). |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.3 | ColumnxdslDevIfConfigUpFixedPortSpeed | read-write | mandatory | The value of this object corresponds to the upstream speed of the specified port for fixed port speed behaviour. All the speeds enumerated above are in kbps. I… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.4 | ColumnxdslDevIfConfigDownFixedPortSpeed | read-write | mandatory | The value of this object corresponds to the downstream speed of the specified port for fixed port speed behaviour. All the speeds enumerated above are in kbps.… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.5 | ColumnxdslDevIfConfigUpAdaptiveUpperBoundPortSpeed | read-write | mandatory | The value of this object corresponds to the upper bound for the upstream port speed of the specified port for adaptive port speed behaviour. The speeds are mea… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.6 | ColumnxdslDevIfConfigUpAdaptiveLowerBoundPortSpeed | read-write | mandatory | The value of this object corresponds to the lower bound for the upstream port speed of the specified port for adaptive port speed behaviour in kbps. If the por… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.7 | ColumnxdslDevIfConfigDownAdaptiveUpperBoundPortSpeed | read-write | mandatory | The value of this object corresponds to the upper bound allowed for the downstream port speed of the specified port for adaptive port speed behaviour. The spee… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.8 | ColumnxdslDevIfConfigDownAdaptiveLowerBoundPortSpeed | read-write | mandatory | The value of this object corresponds to the Minimum lower bound allowed for the downstream port speed of the specified port for adaptive port speed behaviour. … |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.9 | ColumnxdslDevIfConfigReedSolomonDownForwardErrorCorrection | read-write | mandatory | The value of this object corresponds to the Reed-Solomon forward error correction in the downstream direction. The default value of this object should be minim… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.10 | ColumnxdslDevIfConfigMarginThreshold | read-write | mandatory | The value of this object corresponds to the offset from the startup margin. The threshold margin is calculated by subtracting the offset from the startup margi… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.11 | ColumnxdslDevIfConfigEstimatedHrErrRateThreshold | read-write | mandatory | The value of this object corresponds to the estimated error rate threshold value on an hourly basis. A value of -9999 disables the threshold check. The default… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.12 | ColumnxdslDevIfConfigEstimatedDayErrRateThreshold | read-write | mandatory | The value of this object corresponds to the estimated error rate threshold value on a daily basis. A value of -9999 disables this threshold check. The default … |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.13 | ColumnxdslDevIfConfigPortID | read-write | mandatory | The value of this object corresponds to 40 character information only field that identifies what the DSL port is connected to (Circuit ID, MDF location, Custom… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.14 | ColumnxdslDevIfLinkUpDownTransitionThreshold | read-write | mandatory | The value of this object corresponds to the threshold value for link up-down transitions. If link up-down's exceed this threshold value a xdslLinkupDownTransit… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.15 | ColumnxdslDevIfConfigStartUpMargin | read-write | mandatory | The value of this object corresponds to the startup value of the margin for a DSL interface (specified by ifIndex). The unit is db (decibels. The higher the ma… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.16 | ColumnxdslDevIfConfigTxPowerAttenuation | read-write | mandatory | This value corresponds to the Transmitt Power Attenuation in dB for the access node. This value represents the downstream power level in dB. Permissible range … |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.17 | ColumnxdslDevIfConfigSnTxPowerAttenuation | read-write | mandatory | This value corresponds to the Transmitt Power Attenuation in dB for the service node. This value represents the upstream power level in dB. The default value o… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3 | NodexdslMarginLow | This trap signifies that the margin estimate is below a customer set threshold value. this is a trap of 'minor' class. | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3 | NodexdslRemoteSys | |||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1 | TablexdslRemoteSysTable | not-accessible | mandatory | The Remote System information table. This table is based on the mib-2 system mib. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1 | RowxdslRemoteSysEntry | not-accessible | mandatory | Describes a specific xDSL interface Remote Endpoint entry. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.1 | ColumnxdslRemoteSysIndex | read-only | mandatory | Refer to the mib-2 system MIB for a description. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.2 | ColumnxdslRemoteSysDescr | read-only | mandatory | Refer to the mib-2 system MIB for a description. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.3 | ColumnxdslRemoteSysObjectID | read-only | mandatory | Refer to the mib-2 system MIB for a description. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.4 | ColumnxdslRemoteSysUpTime | read-only | mandatory | Refer to the mib-2 system MIB for a description. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.5 | ColumnxdslRemoteSysContact | read-write | mandatory | Refer to the mib-2 system MIB for a description. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.6 | ColumnxdslRemoteSysName | read-write | mandatory | Refer to the mib-2 system MIB for a description. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.7 | ColumnxdslRemoteSysLocation | read-write | mandatory | Refer to the mib-2 system MIB for a description. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.8 | ColumnxdslRemoteSysServices | read-only | mandatory | Refer to the mib-2 system MIB for a description. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.9 | ColumnxdslRemoteSysCircuitId | read-only | mandatory | The value of this object reflects the Circuit ID for a Service Node. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.4 | NodexdslErrorRateHigh | This trap signifies that the error rate estimates is above a customer set threshold value. This is a trap of 'minor' class. | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.4 | NodexdslRemoteDTEStatus | |||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1 | TablexdslRemoteDTEStatusTable | not-accessible | mandatory | The Remote DTE Status table. This provides status information about the DTE port of the DSL RTUs. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1 | RowxdslRemoteDTEStatusEntry | not-accessible | mandatory | This provides status information about the DTE port of a specific DSL RTU. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.1 | ColumnxdslRemoteDTEStatusIndex | read-only | mandatory | The value of this object corresponds directly to each DSL interface as described in the ifTable. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.2 | ColumnxdslRemoteDTEState | read-only | mandatory | The value of this object reflects the state of the DTE interface of the DSL RTU. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.3 | ColumnxdslRemoteDTEType | read-only | mandatory | The value of this object reflects the configuration of the DTE interface of the DSL RTU. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.4 | ColumnxdslRemoteDTEClockSource | read-only | mandatory | The value of this object reflects the timing configuration of the DTE interface of the DSL RTU. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.5 | ColumnxdslRemoteDTEStrobe | read-only | mandatory | The value of this object reflects the clock edge timing configuration of the DTE interface of the DSL RTU. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.6 | ColumnxdslRemoteDTELoopbackState | read-only | mandatory | The value of this object reflects the loopback state of the DTE interface of the DSL RTU. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.5 | NodexdslDevMvlIfConfig | |||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.5 | NodexdslPortFailure | This trap signifies that the processor detected a bad modem set. This is a trap of 'major' class | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1 | TablexdslDevMvlIfConfigTable | not-accessible | mandatory | The xdslDevMvlIfConfigTable provides config information specific to a xDSL(MVL) device, or system. The table is indexed by an object which corresponds to ifInd… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1 | RowxdslDevMvlIfConfigEntry | not-accessible | mandatory | Describes a specific xDSL(MVL) interface entry. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.1 | ColumnxdslDevMvlIfConfigIfIndex | read-only | mandatory | The value of this object corresponds directly to each xDSL(MVL) interface as described in ifTable. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.2 | ColumnxdslDevMvlIfConfigUpperBoundPortSpeed | read-write | mandatory | The value of this object corresponds to the upper bound port speed of the specified port. The speeds are measured in kbps. Supported speeds are 128, 192, 256, … |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.3 | ColumnxdslDevMvlIfConfigMarginThreshold | read-write | mandatory | The value of this object corresponds to the Margin threshold value. Permissible range of values are between -5 and 9. A value of -9999 disables the threshold c… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.4 | ColumnxdslDevMvlIfConfigPortID | read-write | mandatory | The value of this object corresponds to 40 character information only field that identifies what the DSL port is connected to (Circuit ID, MDF location, Custom… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.5 | ColumnxdslDevMvlIfLinkUpDownTransitionThreshold | read-write | mandatory | The value of this object corresponds to the threshold value for link up-down transitions. If link up-down's exceed this threshold value a xdslLinkupDownTransit… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.6 | ColumnxdslDevMvlIfConfigOnHookTxPowerAttenuation | read-write | mandatory | This value corresponds to the On-hook Transmitt Power Attenuation in dB for the access node and the service node. This value represents both downstream and ups… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.7 | ColumnxdslDevMvlIfConfigOffHookTxPowerAttenuation | read-write | mandatory | This value corresponds to the Off-hook Transmitt Power Attenuation in dB for the access node and the service node. This value represents both downstream and up… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.6 | NodexdslDevNAPCustomerAccount | |||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.6 | NodexdslTestStart | This trap signifies that a diagnostic test has started on one of the ports | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1 | TablexdslDevNAPCustomerAccountTable | not-accessible | mandatory | The xdslDevNAPCustomerAccountTable provides customer accounting information on each DSL port. Network Access Providers can accurately bill their end station DS… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1 | RowxdslDevNAPCustomerAccountEntry | not-accessible | mandatory | Provides customer related accounting information specific to an xDSL interface entry. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.1 | ColumnxdslDevNAPCustomerAccountIfIndex | read-only | mandatory | The value of this object corresponds directly to each xDSL interface as described in ifTable. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.2 | ColumnxdslDevNAPCustomerAccountInterval | read-only | mandatory | The value of this object corresponds to the interval of time during which customer accounting data were collected. Day starts at 12.01 midnight |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.3 | ColumnxdslDevNAPCustomerAccountRecKiloOctets | read-only | mandatory | Customer data received at the AN's DSL port in 1000 Octets. The default value of this object is 0 |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.4 | ColumnxdslDevNAPCustomerAccountTrxKiloOctets | read-only | mandatory | Customer data transmitted over the AN's DSL port in 1000 Octets. The default value of this object is 0 |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.7 | NodexdslLinkUpDownInformation | |||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.7 | NodexdslRtuTypeMismatch | The RTU configured in the DSL card does NOT match with the RTU connected to the DSL port indicated by the ifIndex. | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.7.1 | ScalarxdslLinkDownReason | not-accessible | mandatory | This entry contains the reason as to why the DSL Link went down. This information is obtained when the DSL Link is coming up |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.8 | NodexdslRemoteInjection | |||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.8.1 | ScalarxdslRemoteInjectionType | not-accessible | deprecated | The value of this object corresponds to the remote injection type |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.9 | NodexdslDevIDSLConfig | |||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1 | TablexdslDevIDSLConfigTable | not-accessible | mandatory | The xdslDevIDSLConfigTable provides configuration specific to the IDSL link. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1 | RowxdslDevIDSLConfigEntry | not-accessible | mandatory | Describes a specific IDSL configuration entry. |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.1 | ColumnxdslDevIDSLConfigPortSpeedBehaviour | read-write | mandatory | The value of this object corresponds to the behaviour of the specified port. The default value for this object is fixed (1). |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.2 | ColumnxdslDevIDSLConfigPortSpeed | read-write | mandatory | The value of this object corresponds to both upstream and downstream speed of the specified port. All the speeds are in kbps. The default value for this object… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.3 | ColumnxdslDevIDSLConfigPortID | read-write | mandatory | The value of this object corresponds to 40 character information only field that identifies what the DSL port is connected to (Circuit ID, MDF location, Custom… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.4 | ColumnxdslDevIDSLTimingPortTransceiverMode | read-write | mandatory | The transceiver mode selected on the timing source port. Only one IDSL port can be set to NT mode. This timing will then be distributed to all other IDSL ports… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.5 | ColumnxdslDevIDSLConfigMarginThreshold | read-write | mandatory | The value of this object corresponds to the Margin threshold value. A value of -9999 disables the threshold check. The value range of this object is -5 to 10. … |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.6 | ColumnxdslDevIDSLLinkUpDownTransitionThreshold | read-write | mandatory | The value of this object corresponds to the threshold value for link up-down transitions. If link up-down's exceed this threshold value a xdslLinkupDownTransit… |
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.16 | NodexdslRtuSelfTestFail | A self test failure from the RTU connected to the DSL port indicated by the ifIndex. | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.17 | NodexdslRtuLastGasp | Card received LastGap message from SN followed by a link down condition one minute later. | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.18 | NodexdslSNDeviceFail | Operating software has detected an internal device failure. The RTU is still operating. | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.19 | NodexdslSNSelfTestFail | Failure of the RTU's hardware components. This trap is only set if the hardware failure still allows sending traps. | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.20 | NodexdslSNFatalReset | Fatal error device reset | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.21 | NodexdslLinkDownAnalysisTrap | This trap signifies that the sending protocol entity recognizes that the xDSL communication link is up. LinkDownReason conveys the reason for link down. | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.22 | NodexdslRemoteInjectionFailureTrap | This trap signifies that the injection of filters to SN failed It is of warning class | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.23 | NodexdslRemoteInjectionIncompatibleTrap | This trap signifies that the injection of filters is not supported by the SN. It is of warning class | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.24 | NodexdslLossOfNetworkTimingSignalTrap | This trap is generated by an IDSL port card when it detects that the line supplying timing signals to the chassis on the port designated as NT has dropped. The… | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.102 | NodexdslPortSpeedNormal | This trap signifies that the port speed of the xDSL link has has gone above the threshold value. This is a trap of 'warning' class. This trap compliments the x… | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.103 | NodexdslMarginNormal | This trap signifies that the margin estimate has gone above a customer set threshold value. this is a trap of 'minor' class. this trap compliments the xdslMarg… | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.104 | NodexdslErrorRateNormal | This trap signifies that the error rate estimates gone below a customer set threshold value. This is a trap of 'minor' class. This trap compliments the xdslErr… | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.105 | NodexdslPortOperational | This trap signifies that the modem set which was bad is now operational. This is a trap of 'major' class. This trap compliments the xdslPortFailure trap. | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.106 | NodexdslTestOver | This trap signifies that the test has completed on one of the ports. This trap compliments the xdslTestStart trap. | ||
| 1.3.6.1.4.1.1795.2.24.2.6.8.1.107 | NodexdslRtuTypeMismatchClear | The RTU configured in the DSL card does match with the RTU connected to the DSL port indicated by the ifIndex. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |