MIB Viewer

HP-ICF

544 objects
No module-level DESCRIPTION found.
Imported Objects
RFC-1212OBJECT-TYPE
RFC-1215TRAP-TYPE
RFC1155-SMICounter enterprises Gauge IpAddress TimeTicks
RFC1213-MIBDisplayString
SNMP-REPEATER-MIBrptrAddrTrackLastSourceAddress rptrPortAdminStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.11Nodehp
1.3.6.1.4.1.11.2Nodenm
1.3.6.1.4.1.11.2.3NodehpSystem
1.3.6.1.4.1.11.2.3.7NodenetElement
1.3.6.1.4.1.11.2.3.7.1Nodebridge
1.3.6.1.4.1.11.2.3.7.1.1Nodebridge1010
1.3.6.1.4.1.11.2.3.7.1.2NodebridgeRemote
1.3.6.1.4.1.11.2.3.7.1.3Nodeeswitch
1.3.6.1.4.1.11.2.3.7.2Noderouter
1.3.6.1.4.1.11.2.3.7.2.1NodeicfRouterER
1.3.6.1.4.1.11.2.3.7.2.2NodeicfRouterTR
1.3.6.1.4.1.11.2.3.7.2.3NodeicfRouterSR
1.3.6.1.4.1.11.2.3.7.2.4NodeicfRouterFR
1.3.6.1.4.1.11.2.3.7.2.5NodeicfRouterLR
1.3.6.1.4.1.11.2.3.7.2.6NodeicfRouterBR
1.3.6.1.4.1.11.2.3.7.2.7NodeicfRouterPR
1.3.6.1.4.1.11.2.3.7.2.8NodeicfRouter650
1.3.6.1.4.1.11.2.3.7.2.8.2NodeicfRouter650Engine
1.3.6.1.4.1.11.2.3.7.2.8.3NodeicfRouter650Port4E
1.3.6.1.4.1.11.2.3.7.2.8.4NodeicfRouter650Port4S
1.3.6.1.4.1.11.2.3.7.2.8.5NodeicfRouter650Port4T
1.3.6.1.4.1.11.2.3.7.2.9NodeicfRouter230
1.3.6.1.4.1.11.2.3.7.2.10NodeicfRouter250
1.3.6.1.4.1.11.2.3.7.2.11NodeicfRouter255
1.3.6.1.4.1.11.2.3.7.2.12NodeicfRouter210
1.3.6.1.4.1.11.2.3.7.5Nodehub
1.3.6.1.4.1.11.2.3.7.5.1NodeetherTwist12
1.3.6.1.4.1.11.2.3.7.5.3NodefiberOptic
1.3.6.1.4.1.11.2.3.7.5.4NodeetherTwist48
1.3.6.1.4.1.11.2.3.7.5.5NodethinLAN
1.3.6.1.4.1.11.2.3.7.5.6NodeetherTwist24S
1.3.6.1.4.1.11.2.3.7.5.7NodeadvStack12
1.3.6.1.4.1.11.2.3.7.5.8NodeadvStack24
1.3.6.1.4.1.11.2.3.7.5.9NodeadvStack48
1.3.6.1.4.1.11.2.3.7.5.10NodeadvStackVg15
1.3.6.1.4.1.11.2.3.7.5.11NodeadvStackU8
1.3.6.1.4.1.11.2.3.7.5.12NodeadvStackU16
1.3.6.1.4.1.11.2.3.7.8Nodechassis
1.3.6.1.4.1.11.2.3.7.8.1NoderepeaterAgent
1.3.6.1.4.1.11.2.3.7.8.2NodechassisAgents
1.3.6.1.4.1.11.2.3.7.8.2.1NodeicfVgAgent
1.3.6.1.4.1.11.2.3.7.8.2.2NodeicfEnetAgent
1.3.6.1.4.1.11.2.3.7.8.3NodeicfSensors
1.3.6.1.4.1.11.2.3.7.8.3.1NodeicfPowerSupplySensor
1.3.6.1.4.1.11.2.3.7.8.3.2NodeicfFanSensor
1.3.6.1.4.1.11.2.3.7.8.3.3NodeicfTemperatureSensor
1.3.6.1.4.1.11.2.14Nodeicf
1.3.6.1.4.1.11.2.14.1NodeicfCommon
1.3.6.1.4.1.11.2.14.1.0NodethresholdTrapA thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has e…
1.3.6.1.4.1.11.2.14.1.1ScalarlastSetErrorread-onlyobsoleteProvide more detailed, enterprise specific error type. Any error resulting from a SET request will cause this object to be updated, and the previous value over…
1.3.6.1.4.1.11.2.14.1.2Scalarpasswordread-writeobsoleteThis is the encrypted password for the device. The algorithm used for the encryption process is HP proprietary. Third party vendor support is provided by not s…
1.3.6.1.4.1.11.2.14.1.3Scalarresetread-writeobsoleteWhen the reset object is set to to 'warm' it results in a 'warm' reset, which does not clear the parameters in NOVRAM to factory defaults. When set to 'cold', …
1.3.6.1.4.1.11.2.14.1.4ScalarselfTestread-writeobsoleteSelf test is invoked by setting this flag to 'stExecute. When the object changes to 'stSuccess', the test has completed successfully. Icf devices will 'hard-fa…
1.3.6.1.4.1.11.2.14.1.5Scalarsemaphoreread-writeobsoleteThis object allows a set of objects to be locked. The lock is only assured by the 'cooperation' of other management entities; they must wait until the lock is …
1.3.6.1.4.1.11.2.14.1.6Nodediscovery
1.3.6.1.4.1.11.2.14.1.6.1ScalarpollResponseread-writeobsoleteFlag indicating whether device should respond to multicast SNMP PDUs. When set 'true', the device will respond to multicast SNMP PDU's. Otherwise, the response…
1.3.6.1.4.1.11.2.14.1.6.2ScalarannounceAddressread-writedeprecatedWhen set to any MAC multicast address, the device will transmit three identical packets, each with the MAC source set to the device's MAC address, the MAC dest…
1.3.6.1.4.1.11.2.14.1.6.3ScalarmapAddressread-writedeprecatedWhen this object is set a map address search begins. If the address is detected on only one port, then the mapPort object is set to the port number on which th…
1.3.6.1.4.1.11.2.14.1.6.4ScalarmapStateread-onlydeprecatedThis object will be set to 'psNone' if the address set in the mapAddress object has not been received on any of the device's interface/ports. It will be set to…
1.3.6.1.4.1.11.2.14.1.6.5ScalarmapPortread-onlydeprecatedThe port number on which the map address was detected. If map state is 'psNone' or 'psMany' then this object is not valid. This object has been deprecated.
1.3.6.1.4.1.11.2.14.1.6.6ScalaripSubnetMaskread-onlyobsoleteThis object is the IP subnet mask. This object is obsolete. Management applications should retrieve the ipAddrTable, which contains the ipAdEntNetMask object f…
1.3.6.1.4.1.11.2.14.1.7NodeicfEvent
1.3.6.1.4.1.11.2.14.1.7.1NodeeventNotificationNode
1.3.6.1.4.1.11.2.14.1.7.1.1ScalarevtIpNotifyread-writeobsoleteThe network address of the manager node which is to receive the event notification trap. This functionality is currently duplicated in the authorized manager l…
1.3.6.1.4.1.11.2.14.1.7.1.2ScalarevtIpxNotifyread-writeobsoleteThe IPX address of the manager node which is to receive the event notification trap. This functionality is currently duplicated in the authorized manager list.
1.3.6.1.4.1.11.2.14.1.7.2TableevtTablenot-accessibleobsoleteA list of event entries for event processing.
1.3.6.1.4.1.11.2.14.1.7.2.1RowevtIndexread-onlyobsoleteThe index value which uniquely identifies the event to which this entry is applicable.
1.3.6.1.4.1.11.2.14.1.7.2.2RowevtArmread-writeobsoleteThis object arms and disarms events. Events are implicitly rearmed, that is, once an event occurs, it is rearmed. Sets to the intrusionEvent instance of this o…
1.3.6.1.4.1.11.2.14.1.7.2.3RowevtTimeSinceOccurrenceread-onlyobsoleteThis object specifies the number of centiseconds since this event last occurred.
1.3.6.1.4.1.11.2.14.1.7.3TableevtThresholdTablenot-accessibleobsoleteA list of event entries for event processing.
1.3.6.1.4.1.11.2.14.1.7.3.1RowevthIndexread-onlyobsoleteThe index value which uniquely identifies the event to which this entry is applicable.
1.3.6.1.4.1.11.2.14.1.7.3.2RowevthArmread-writeobsoleteThis object arms and disarms events. The notification node, the associated event object, threshold, hysteresis, and time interval should all be set before an e…
1.3.6.1.4.1.11.2.14.1.7.3.3RowevthObjectread-writeobsoleteThe data of this object is itself an OBJECT IDENTIFIER which selects the mib object and instance that is to be monitored for the event. Only types INTEGER and …
1.3.6.1.4.1.11.2.14.1.7.3.4RowevthThresholdread-writeobsoleteThe threshold against which the variable specified in evthObject is tested over the time interval specified in the evthTimeInterval When the threshold is met o…
1.3.6.1.4.1.11.2.14.1.7.3.5RowevthHysteresisread-writeobsoleteThe low value which the variable specified in evthObject must fall to or below after exceeding evthThreshold before the event can re-occur when the threshold i…
1.3.6.1.4.1.11.2.14.1.7.3.6RowevthTimeIntervalread-writeobsoleteThe time interval over which the variable specified in the evthObject is sampled.
1.3.6.1.4.1.11.2.14.1.7.3.7RowevthTimeSinceOccurrenceread-onlyobsoleteThis object specifies the number of centiseconds since this event was last triggered.
1.3.6.1.4.1.11.2.14.1.8NodelinkTest
1.3.6.1.4.1.11.2.14.1.8.1NodelinkTestAddress
1.3.6.1.4.1.11.2.14.1.8.1.1ScalarlinkTest802MacAddressread-writedeprecatedIf this object is set to the MAC address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link test performed will …
1.3.6.1.4.1.11.2.14.1.8.1.2ScalarlinkTestIpAddressread-writedeprecatedIf this object is set to the network address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link test performed w…
1.3.6.1.4.1.11.2.14.1.8.1.3ScalarlinkTestIpxAddressread-writedeprecatedIf this object is set to the IPX address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link test performed will …
1.3.6.1.4.1.11.2.14.1.8.2ScalarlinkTestRepetitionsread-writedeprecatedThe number of link tests that the device is to complete. When this object is set to a non-zero value, the linkTestSuccess object is zeroed and the device begin…
1.3.6.1.4.1.11.2.14.1.8.3ScalarlinkTestSuccessread-onlydeprecatedFor every successful link test, this counter is incremented. When link tests are completed, this counter contains the total number of successful tests.
1.3.6.1.4.1.11.2.14.1.8.4ScalarlinkTestTimeoutread-writedeprecatedThe time interval over which a link test response must be received, or the test is counted as failed.
1.3.6.1.4.1.11.2.14.1.9Tableicf8023MacTablenot-accessibleobsoleteA list of icf8023Mac entries.
1.3.6.1.4.1.11.2.14.1.9.1Rowicf8023MacIndexread-onlyobsoleteThe index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index on a hub is the s…
1.3.6.1.4.1.11.2.14.1.9.2Rowicf8023MacInBroadcastPktsread-onlyobsoleteCount of the broadcast packets received.
1.3.6.1.4.1.11.2.14.1.9.3Rowicf8023MacOutBroadcastPktsread-onlyobsoleteCount of the broadcast packets transmitted.
1.3.6.1.4.1.11.2.14.1.9.4Rowicf8023MacInMulticastPktsread-onlyobsoleteCount of the multicast packets received.
1.3.6.1.4.1.11.2.14.1.9.5Rowicf8023MacOutMulticastPktsread-onlyobsoleteCount of the multicast packets transmitted.
1.3.6.1.4.1.11.2.14.1.9.6Rowicf8023MacRuntsread-onlyobsoleteThe number of media frames encountered that were too short (by ethernet/802.3 standards).
1.3.6.1.4.1.11.2.14.1.9.7Rowicf8023MacGiantsread-onlyobsoleteThe number of media frames encountered that were too long (by ethernet/802.3 standards).
1.3.6.1.4.1.11.2.14.1.9.8Rowicf8023MacMissedPktErrorsread-onlyobsoleteThe number of frames lost due to lack of resources (e.g. ring buffers, memory buffers, etc).
1.3.6.1.4.1.11.2.14.1.9.9Rowicf8023MacExcessDeferralsread-onlyobsoleteThe number of times a frame could not be sent due to excess deferrals because another node was transmitting continually.
1.3.6.1.4.1.11.2.14.1.9.10Rowicf8023MacTotalMediaErrorsread-onlyobsoleteCount of all possible medium transmit and receive errors, such as crc, alignment, sequence, length, excess etc. The purpose of this object is to support aggreg…
1.3.6.1.4.1.11.2.14.1.9.11Rowicf8023MacSpuriousIntrsread-onlyobsoleteThe number of times that the network interface for this port generated a spurious hardware interrupt. A non-zero value for this object indicates a potential ha…
1.3.6.1.4.1.11.2.14.1.10NodeicfDownload
1.3.6.1.4.1.11.2.14.1.10.1NodeicfDownloadAddress
1.3.6.1.4.1.11.2.14.1.10.1.1ScalaricfDownloadIpAddressread-writeobsoleteThe IP address of the TFTP server to download firmware from.
1.3.6.1.4.1.11.2.14.1.10.1.2ScalaricfDownloadIpxAddressread-writeobsoleteThe IPX address of the TFTP server to download firmware from.
1.3.6.1.4.1.11.2.14.1.10.2ScalaricfDownloadFilenameread-writeobsoleteFilename and path of file to download (maximum length of 63 characters + NULL).
1.3.6.1.4.1.11.2.14.2NodeicfHub
1.3.6.1.4.1.11.2.14.2.1ScalarhubThinlanFaultread-writeobsoleteWhen set to 'true' this object causes the Fault LED to blink if the ThinLan Port is segmented. This object has been deprecated in favor of hpRptrThinlanFault.
1.3.6.1.4.1.11.2.14.2.2NodehubGlobal
1.3.6.1.4.1.11.2.14.2.2.1ScalarhubGlobalErrorsread-onlyobsoleteThis counter is incremented for each packet with an error received on any port. This counter does not include runts, as they are a normal media condition. This…
1.3.6.1.4.1.11.2.14.2.2.2ScalarhubGlobalCollisionsread-onlyobsoleteThis counter is incremented for each collision between any two or more ports (or AUI) detected by the hub. This object has been deprecated in favor of rptrMoni…
1.3.6.1.4.1.11.2.14.2.2.3ScalarhubGlobalPktFragmentsread-onlyobsoleteThis counter is the sum of hubPortPktFragments for all ports. This object has been deprecated in favor of hpRptrMonGlobalFrames.
1.3.6.1.4.1.11.2.14.2.2.4ScalarhubGlobalRuntsread-onlyobsoleteThis counter is incremented for each runt frame received on any port. This object has been deprecated in favor of hpRptrMonGlobalRunts.
1.3.6.1.4.1.11.2.14.2.2.5ScalarhubGlobalGiantsread-onlyobsoleteThis counter is incremented for each giant frame received on any port. This object has been deprecated in favor of hpRptrMonGlobalFrameTooLongs.
1.3.6.1.4.1.11.2.14.2.2.6ScalarhubGlobalCrcErrorsread-onlyobsoleteThis counter is incremented for each frame with a CRC error received on any port. This object has been deprecated in favor of hpRptrMonGlobalFCSErrors.
1.3.6.1.4.1.11.2.14.2.2.7ScalarhubGlobalAlignmentErrorsread-onlyobsoleteThis counter is incremented for each frame with an alignment error received on any port. This object has been deprecated in favor of hpRptrMonGlobalAlignmentEr…
1.3.6.1.4.1.11.2.14.2.2.8ScalarhubGlobalInOctetsread-onlyobsoleteThis counter is incremented for each octet received on any port. This object has been deprecated in favor of hpRptrMonGlobalOctets.
1.3.6.1.4.1.11.2.14.2.2.9ScalarhubGlobalInUcastPktsread-onlyobsoleteThis counter is incremented for each unicast packet received on any port. This counter has been deprecated in favor of hpRptrMonGlobalUcastPackets.
1.3.6.1.4.1.11.2.14.2.2.10ScalarhubGlobalInNUcastPktsread-onlyobsoleteThis counter is incremented for each non-unicast packet received on any port. This object has been deprecated in favor of hpRptrMonGlobalBcastPackets and hpRpt…
1.3.6.1.4.1.11.2.14.2.2.11ScalarhubGlobalInBroadcastPktsread-onlyobsoleteThis counter is incremented for each broadcast packet received on any port. This object has been deprecated in favor of hpRptrMonGlobalBcastPackets.
1.3.6.1.4.1.11.2.14.2.3TablehubPortTablenot-accessibleobsoleteA list of hubPort entries.
1.3.6.1.4.1.11.2.14.2.3NodelinkBeatTrapA linkBeatTrap(3) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's link beat status. The curr…
1.3.6.1.4.1.11.2.14.2.3.1RowhubPortIndexread-onlyobsoleteThe index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same port …
1.3.6.1.4.1.11.2.14.2.3.2RowhubPortPktFragmentsread-onlyobsoleteThis counter is incremented when a packet or packet fragment is encountered for a port instance. This object has been deprecated in favor of rptrMonitorPortRea…
1.3.6.1.4.1.11.2.14.2.3.3RowhubPortCollisionsread-onlyobsoleteThis counter is incremented when a port is involved in a collision. This object has been deprecated in favor of rptrMonitorPortCollisions.
1.3.6.1.4.1.11.2.14.2.3.4RowhubPortSegmentationread-onlyobsoleteThis is a flag which is 'true' if the port is currently segmented and 'false' otherwise. This object has been deprecated in favor of rptrPortAutoPartitionState.
1.3.6.1.4.1.11.2.14.2.3.5RowhubPortLinkBeatStatusread-onlyobsoleteThis is a flag which is 'true' if link beat is detected on the port and 'false' otherwise. The value of this variable will always be 'true' when the correspond…
1.3.6.1.4.1.11.2.14.2.3.6RowhubPortLinkBeatEnableread-writeobsoleteWhen this flag is set to 'true' the port's link beat is enabled and when set to 'false' it is disabled. This object has been deprecated in favor of hpRptrPtLin…
1.3.6.1.4.1.11.2.14.2.3.7RowhubPortMacAddressread-onlyobsoleteEach port maintains the MAC address of the node currently attached to it. This address is valid only when the port state flag is set to 'psSingle'. This object…
1.3.6.1.4.1.11.2.14.2.3.8RowhubPortAddressStateread-writeobsoleteThe port state object may take on three values. 'psNone' means no packets have been received on the port. 'psSingle' means all packets received on the port hav…
1.3.6.1.4.1.11.2.14.2.3.9RowhubPortPolarityReversedread-onlyobsoleteThis object is used to indicate that the hub port was wired with the positive/negative polarity of its transmit and receive pairs reversed. Note that the port …
1.3.6.1.4.1.11.2.14.2.3.10RowhubPortLateEventDisableread-onlyobsoleteThis object indicates that the hub port was disabled as a result of excessive late collisions being caused by the end node attached to this port. This flag is …
1.3.6.1.4.1.11.2.14.2.4NodehubBitmaps
1.3.6.1.4.1.11.2.14.2.4NodesegmentationTrapA segmentationTrap(4) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's segmentation status. T…
1.3.6.1.4.1.11.2.14.2.4.1ScalarhubPortsOperStatusread-onlyobsoleteThe hubPortsOperStatus is a bit map of the state of all hub ports. The object has a 1 bit for each port that is enabled, not segmented, and linkbeat is detecte…
1.3.6.1.4.1.11.2.14.2.5NodebackupLinkTrapA backupLinkTrap(5) is device type specific to most ICF hubs. It signifies that there has been a change in state of rptrPortAdminStatus for a backup port on th…
1.3.6.1.4.1.11.2.14.2.5ScalarhubAddressTableMaxAgeread-writeobsoleteThe hubAddressTableMaxAge is the time beyond which an inactive MAC address will be removed from the hubPortMacAddress table and the hubAddressTable. Although h…
1.3.6.1.4.1.11.2.14.2.6TablehubAddressTablenot-accessibledeprecatedA list of entries present in the hub address table.
1.3.6.1.4.1.11.2.14.2.6NodeintrusionTrapAn intrusionTrap(6) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a port security vio…
1.3.6.1.4.1.11.2.14.2.6.1RowhubAddressIndexread-onlyobsoleteThe index value which uniquely identifies the chunk to which this entry is applicable.
1.3.6.1.4.1.11.2.14.2.6.2RowhubAddressChunkread-onlyobsoleteThe hubAddressChunk object returns an opaque chunk of the address table. Each chunk can be interpreted as an array of records in the form: mac address [6 bytes…
1.3.6.1.4.1.11.2.14.2.7NodeaddressMovedTrapAn addressMovedTrap(7) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a source MAC add…
1.3.6.1.4.1.11.2.14.2.7ScalarhubNumBkpLinksread-onlyobsoleteThe number of backup links configurable on this hub.
1.3.6.1.4.1.11.2.14.2.8TablehubBkpLinkTablenot-accessibleobsoleteA list of backup link configuration entries. For a given backup link, the hub will periodically send a test packet to the device at the end of the link. If the…
1.3.6.1.4.1.11.2.14.2.8NodenewAddressTrapA newAddressTrap(8) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a new MAC address h…
1.3.6.1.4.1.11.2.14.2.8.1RowhubBkpLinkIndexread-onlyobsoleteThe index value which uniquely identifies the backup link configuration entry to which the instance is applicable.
1.3.6.1.4.1.11.2.14.2.8.2RowhubBackupPortread-writeobsoleteThe port number of the backup link. Setting this object to zero removes the backup link configuration.
1.3.6.1.4.1.11.2.14.2.8.3RowhubPrimaryPortread-writeobsoleteThe port number of the primary link. It can only be set to zero if the hubBackupPort is also zero.
1.3.6.1.4.1.11.2.14.2.8.4RowhubBackupAddressread-writeobsoleteThe MAC address of the device at the other end of the primary link which will respond to the periodic test packets sent by this hub.
1.3.6.1.4.1.11.2.14.2.8.5RowhubBackupTestTimeread-writeobsoleteThe frequency, in time ticks, between sending the periodic test packets. The actual resolution of this timer is in seconds. The test packet response timeout is…
1.3.6.1.4.1.11.2.14.2.8.6RowhubBackupConsecutiveFailsread-writeobsoleteThe number of test packet failures which will cause the hub to switch to the backup link (i.e., backup port turned on, primary port turned off). A value of one…
1.3.6.1.4.1.11.2.14.2.9ScalarhubSqeEnabledread-onlyobsoleteWhen 'true', this flag indicates that SQE has been detected for the last ten agent transmits and there is a high probability that the SQE switch on the transce…
1.3.6.1.4.1.11.2.14.2.10NodehubSecurity
1.3.6.1.4.1.11.2.14.2.10.1TablehubSecurePortTablenot-accessiblemandatoryTable containing security configuration for each port.
1.3.6.1.4.1.11.2.14.2.10.1.1RowhubSecurePortEntrynot-accessiblemandatoryAn entry in the hubSecurePortTable, containing the security configuration for a single port.
1.3.6.1.4.1.11.2.14.2.10.1.1.1ColumnhubSecPtGroupIndexread-onlymandatoryThis object identifies the group containing the port for which this entry contains security configuration information.
1.3.6.1.4.1.11.2.14.2.10.1.1.2ColumnhubSecPtPortIndexread-onlymandatoryThis object identifies the port within the group for which this entry contains security configuration information.
1.3.6.1.4.1.11.2.14.2.10.1.1.3ColumnhubSecPtSecurityAddressread-writemandatoryThe desired authorized MAC address for this port. This can be either a regular station address to configure a specific address, or it can be one of the followi…
1.3.6.1.4.1.11.2.14.2.10.1.1.4ColumnhubSecPtAuthorizedAddressread-onlymandatoryThe MAC address of the station authorized to be on this port. This address could either have been configured by specifying a regular station address for hubSec…
1.3.6.1.4.1.11.2.14.2.10.1.1.5ColumnhubSecPtPreventEavesdropread-writemandatoryIf enabled, unicast packets not addressed to the authorized address for this port will be scrambled.
1.3.6.1.4.1.11.2.14.2.10.1.1.6ColumnhubSecPtAlarmEnableread-writemandatoryIf enabled, the agent will generate an intrusionTrap if a packet is received on this port with a source MAC address that is different from the hubSecPtAuthoriz…
1.3.6.1.4.1.11.2.14.2.10.1.1.7ColumnhubSecPtIntrusionFlagread-writemandatoryThis flag indicates if an intrusion has occurred on this port. The Security LED on the hub will blink if any instance of this flag has the value intrusion. Set…
1.3.6.1.4.1.11.2.14.2.10.2TablehubIntruderLogTablenot-accessiblemandatoryThis table contains a record of the twenty most recent port security violations. The first entry in the table is the oldest.
1.3.6.1.4.1.11.2.14.2.10.2.1RowhubIntruderLogEntrynot-accessiblemandatoryA row in the hubIntruderLogTable containing information about a single port security violation.
1.3.6.1.4.1.11.2.14.2.10.2.1.1ColumnhubIntruderIndexread-onlymandatoryThe index of this entry in the intruder log table. Index 1 will always contain the oldest entry. If the table is full when a new intrusion occurs, the new entr…
1.3.6.1.4.1.11.2.14.2.10.2.1.2ColumnhubIntruderGroupread-onlymandatoryThis object identifies the group containing the port on which this intrusion occurred.
1.3.6.1.4.1.11.2.14.2.10.2.1.3ColumnhubIntruderPortread-onlymandatoryThis object identifies the port within the group on which this intrusion occurred. A port number of zero indicates that this entry is unused and the values for…
1.3.6.1.4.1.11.2.14.2.10.2.1.4ColumnhubIntruderAddressread-onlymandatoryThis object contains the source MAC address of the intruder.
1.3.6.1.4.1.11.2.14.2.10.2.1.5ColumnhubIntruderTimeread-onlymandatoryThe value of sysUpTime when the intrusion occurred. This will be zero if the agent has been reset since the intruder was detected, since sysUpTime could be mis…
1.3.6.1.4.1.11.2.14.2.11TablehubAddressMoveLogTablenot-accessiblemandatoryA log of the 20 most recent times that the agent detected that a source MAC address which had been heard on one port had moved to a different port.
1.3.6.1.4.1.11.2.14.2.11.1RowhubAddressMoveLogEntrynot-accessiblemandatoryA row in the hubAddressMoveLogTable containing information about a single address movement.
1.3.6.1.4.1.11.2.14.2.11.1.1ColumnhubAddrMoveIndexread-onlymandatoryThe index of this entry in the address movement log table. Index 1 will always contain the oldest entry. If the table is full when a new address movement occur…
1.3.6.1.4.1.11.2.14.2.11.1.2ColumnhubAddrMoveAddressread-onlymandatoryThe MAC address of the station that moved to a new port.
1.3.6.1.4.1.11.2.14.2.11.1.3ColumnhubAddrMoveOldGroupread-onlymandatoryThe group containing the port on which this address had been operating before it moved.
1.3.6.1.4.1.11.2.14.2.11.1.4ColumnhubAddrMoveOldPortread-onlymandatoryThe port within the group on which this address had been operating before it moved.
1.3.6.1.4.1.11.2.14.2.11.1.5ColumnhubAddrMoveNewGroupread-onlymandatoryThe group containing the port that the address moved to.
1.3.6.1.4.1.11.2.14.2.11.1.6ColumnhubAddrMoveNewPortread-onlymandatoryThe port within the group that the address moved to.
1.3.6.1.4.1.11.2.14.2.12ScalarhubLateEventMonitorread-writemandatoryThis object configures the late event monitoring functionality for the hub. This mode periodically samples the rptrMonitorPortLateEvents value for each port. I…
1.3.6.1.4.1.11.2.14.3NodeicfBridge
1.3.6.1.4.1.11.2.14.3.1ScalaroperationalStateread-writeobsoleteThis object controls the forwarding nature of the bridge. In the Learning state the bridge will learn new MAC addresses, and it ages out older MAC addresses. S…
1.3.6.1.4.1.11.2.14.3.2ScalarforwardDbMaxAgeread-writeobsoleteThe value of this object controls how long a MAC address stays in the forwarding database. See 802.1d, section 3.9.2 'Dynamic Entries'.
1.3.6.1.4.1.11.2.14.3.3TableaddressTablenot-accessibleobsoleteA list of address entries.
1.3.6.1.4.1.11.2.14.3.3NodestpTrapA stpTrap(3) is device type specific to ICF bridges. It signifies that the Spanning Tree entity in the bridge has detected a change of state to either Blocking…
1.3.6.1.4.1.11.2.14.3.3.1RowaddressIndexread-onlyobsoleteThe index value which uniquely identifies the chunk to which this entry is applicable.
1.3.6.1.4.1.11.2.14.3.3.2RowaddressChunkread-writeobsoleteThis object returns an opaque chunk of the address table. The instance specifies a chunk of the address table. Each chunk can be interpreted as an array of 41 …
1.3.6.1.4.1.11.2.14.3.4TablebrgPortTablenot-accessibleobsoleteA list of brgPort entries.
1.3.6.1.4.1.11.2.14.3.4NodetemperatureTrapA temperatureTrap(4) is device type specific to ICF bridges. It signifies that the bridge hardware has detected an overheated condition.
1.3.6.1.4.1.11.2.14.3.4.1RowbrgPortIndexread-onlyobsoleteThe index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this ind…
1.3.6.1.4.1.11.2.14.3.4.2RowbrgPortCacheHitsread-onlyobsoleteCount of the successful cache matches when looking up a destination MAC address.
1.3.6.1.4.1.11.2.14.3.4.3RowbrgPortCacheMissesread-onlyobsoleteCount of the unsuccessful cache matches when looking up a destination MAC address.
1.3.6.1.4.1.11.2.14.3.4.4RowbrgPortForwardedPktsread-onlyobsoleteCount of the packets received on this port and forwarded to the other port.
1.3.6.1.4.1.11.2.14.3.4.5RowbrgPortFilteredPktsread-onlyobsoleteCount of the frames that were received on this port and filtered.
1.3.6.1.4.1.11.2.14.3.5TablewildcardTablenot-accessibleobsoleteA list of wildcard entries.
1.3.6.1.4.1.11.2.14.3.5.1RowwildcardIndexread-onlyobsoleteThe index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this ind…
1.3.6.1.4.1.11.2.14.3.5.2RowwildcardFilterread-writeobsoleteThis object contains the binary value used to filter frames. The data in the frame at the offset specified by the Wildcard offsets is XOR'ed with this object a…
1.3.6.1.4.1.11.2.14.3.5.3RowwildcardMaskread-writeobsoleteThis object indicates which portion of the wildcardFilter is to be used in filtering. The data in the frame at the offset specified by Wildcard offsets is AND'…
1.3.6.1.4.1.11.2.14.3.5.4RowwildcardOffsetread-writeobsoleteIndicates the position in a received frame which is to have the Wildcard Mask/Filter applied. The indicated packet byte is aligned with the 0th byte of the wil…
1.3.6.1.4.1.11.2.14.3.5.5RowwildcardUserOffsetread-writeobsoleteThis value is a byte offset from the beginning of the packet. If this offset is such that any portion of the filter extends past the end of the packet (for wil…
1.3.6.1.4.1.11.2.14.3.5.6RowwildcardArmread-writeobsoleteThis object arms (enables) the Wildcard Filter provided all of the other wildcard objects have been set to proper values. To disarm a wildcard, only the wildca…
1.3.6.1.4.1.11.2.14.3.6Nodestp
1.3.6.1.4.1.11.2.14.3.6.1ScalarstpBridgeIdread-onlyobsoleteA 64 bit binary bridge id composed of bridge priority and the bridge's mac address fields. see: IEEE 802.1(d) 6.8.1.1.3(1), 4.5.3.7
1.3.6.1.4.1.11.2.14.3.6.2ScalarstpTopoChangeTimeread-onlyobsoleteThe time since the last topology change. see: IEEE 802.1(d) 6.8.1.1.3(2), 4.5.3.12
1.3.6.1.4.1.11.2.14.3.6.3ScalarstpTopoNumChangesread-onlyobsoleteThe number of topo changes since initialization of STP. see: IEEE 802.1(d) 6.8.1.1.3(3)
1.3.6.1.4.1.11.2.14.3.6.4ScalarstpTopoChangeread-onlyobsoleteA 1 bit flag broadcast by the root bridge indicating that a topology change is underway, and Stp bridges should use short term aging. see: IEEE 802.1(d) 6.8.1.…
1.3.6.1.4.1.11.2.14.3.6.5ScalarstpDesignatedRootread-onlyobsoleteThe binary bridge id that this bridge believes to be the root bridge for the bridged Lan. see: IEEE 802.1(d) 6.8.1.1.3(5), 4.5.3.1
1.3.6.1.4.1.11.2.14.3.6.6ScalarstpRootCostread-onlyobsoleteThe cost of the path to the root bridge from this bridge; equal to the sum of the designated cost and the path cost held for the root port. see: IEEE 802.1(d) …
1.3.6.1.4.1.11.2.14.3.6.7ScalarstpRootPortread-onlyobsoleteThe port id that this bridge believes to be the root bridge's root port for the bridged Lan. see: IEEE 802.1(d) 6.8.1.1.3(7), 4.5.3.3
1.3.6.1.4.1.11.2.14.3.6.8ScalarstpCurrentMaxAgeread-onlyobsoleteThe Max Age value received from the Root Bridge (in seconds); the Stp is currently using the value. see: IEEE 802.1(d) 6.8.1.1.3(8), 4.5.3.4
1.3.6.1.4.1.11.2.14.3.6.9ScalarstpCurrentHelloTimeread-onlyobsoleteThe Hello time value received from the Root Bridge (in seconds); the Stp records the value. see: IEEE 802.1(d) 6.8.1.1.3(9), 4.5.3.5
1.3.6.1.4.1.11.2.14.3.6.10ScalarstpCurrentForwardDelayread-onlyobsoleteThe forward delay value received from the Root Bridge (in seconds); the Stp is currently using the value. see: IEEE 802.1(d) 6.8.1.1.3(10), 4.5.3.6
1.3.6.1.4.1.11.2.14.3.6.11ScalarstpMaxAgeread-writeobsoleteThe maximum age allowed of Config information for a port before a bridge will attempt to become the root (in seconds). Transmitted by this bridge when it is, o…
1.3.6.1.4.1.11.2.14.3.6.12ScalarstpHelloTimeread-writeobsoleteThe time between Config packet transmission when this bridge is, or is attempting to become the root (in seconds). Transmitted by this bridge when it is, or is…
1.3.6.1.4.1.11.2.14.3.6.13ScalarstpForwardDelayread-writeobsoleteThe time spent in the Listening and Learning states used when this bridge is, or is attempting to become the root (in seconds). Transmitted by this bridge when…
1.3.6.1.4.1.11.2.14.3.6.14ScalarstpPriorityread-writeobsoleteThe upper 16 bits of the 64 bit BridgeId composed of priority and the bridge's mac address fields. see: IEEE 802.1(d) 6.8.1.2.2(4), 4.5.3.7
1.3.6.1.4.1.11.2.14.3.6.15TablestpPortTablenot-accessibleobsoleteA list of stpPort entries.
1.3.6.1.4.1.11.2.14.3.6.15.1RowstpPortIndexread-onlyobsoleteThe index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same inter…
1.3.6.1.4.1.11.2.14.3.6.15.2RowstpPortStateread-writeobsoleteThe state of a port on a 2 port bridge is really the state of the bridge itself. Management is only allowed to set this object to 'stpDisabled' or 'stpBlocking…
1.3.6.1.4.1.11.2.14.3.6.15.3RowstpPortIdread-onlyobsoleteThe 16 bit port id composed of priority and the port's unique id fields. see: IEEE 802.1(d) 6.8.2.1.3(3), 4.5.5.1
1.3.6.1.4.1.11.2.14.3.6.15.4RowstpPortPathCostread-writeobsoleteThe contribution of the path through this port, when the port is the root port, to the total cost of the path to the root for this bridge. see: IEEE 802.1(d) 6…
1.3.6.1.4.1.11.2.14.3.6.15.5RowstpPortRootIdread-onlyobsoleteThe bridge id that this port believes to be the root bridge for the bridged Lan. see: IEEE 802.1(d) 6.8.2.1.3(5), 4.5.5.4
1.3.6.1.4.1.11.2.14.3.6.15.6RowstpPortDesignatedCostread-onlyobsoleteThe cost of the path to the root offered by the Designated Port on the LAN to which this Port is attached. see: IEEE 802.1(d) 6.8.2.1.3(6), 4.5.5.5
1.3.6.1.4.1.11.2.14.3.6.15.7RowstpPortDesignatedBridgeread-onlyobsoleteThe Bridge Id of the designated bridge for the LAN associated with the port. see: IEEE 802.1(d) 6.8.2.1.3(7), 4.5.5.6
1.3.6.1.4.1.11.2.14.3.6.15.8RowstpPortDesignatedPortread-onlyobsoleteThe port id of the bridge believed to be the designated port of the LAN associated with the port. see: IEEE 802.1(d) 6.8.2.1.3(8), 4.5.5.7
1.3.6.1.4.1.11.2.14.3.6.15.9RowstpPortPriorityread-writeobsoleteThe upper 8 bits of the 16 bit PortId composed of priority and the port's unique id fields. see: IEEE 802.1(d) 6.8.2.3.2(3), 4.5.5.1
1.3.6.1.4.1.11.2.14.3.7TablehdlcErrorTablenot-accessibleobsoleteA list of hdlcError entries.
1.3.6.1.4.1.11.2.14.3.7.1RowhdlcErrorIndexread-onlyobsoleteThe index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same inter…
1.3.6.1.4.1.11.2.14.3.7.2RowhdlcErrorIndicationsread-onlyobsoleteErrors occurring during information transfer which required instruction from CPU for recovery. This is a serious link problem. The local node will either reset…
1.3.6.1.4.1.11.2.14.3.7.3RowhdlcT1Timeoutsread-onlyobsoleteThe number of times the retransmission timer (x25T1Timer) timed out.
1.3.6.1.4.1.11.2.14.3.7.4RowhdlcMissedPacketsread-onlyobsoleteCount of the frames lost by the receiver because there wasn't a receive buffer.
1.3.6.1.4.1.11.2.14.3.7.5RowhdlcRcvOverrunsread-onlyobsoleteCount of the number of times the reciever's FIFO was full when the receiver was ready to put new data into the FIFO.
1.3.6.1.4.1.11.2.14.3.7.6RowhdlcXmtUnderrunsread-onlyobsoleteCount of the number of times the transmitter has aborted a frame transmission because data was late from memory.
1.3.6.1.4.1.11.2.14.3.7.7RowhdlcProviderLostPrimitivesread-onlyobsoleteCount of the number of lost control frames due to 802.3 priority processing on receive.
1.3.6.1.4.1.11.2.14.3.7.8RowhdlcRuntFrameReceivesread-onlyobsoleteCount of the HDLC frames received that were less than the minimum legal HDLC size.
1.3.6.1.4.1.11.2.14.3.7.9RowhdlcGiantFrameReceivesread-onlyobsoleteCount of the HDLC frames received that were larger than the maximum legal size that can be sent on the 802.3 LAN link.
1.3.6.1.4.1.11.2.14.3.7.10RowhdlcBadFrameReceivesread-onlyobsoleteCount of the sum of: HDLC frames with bad checksum, and misaligned HDLC frames.
1.3.6.1.4.1.11.2.14.3.7.11RowhdlcRejectFrameReceivesread-onlyobsoleteCount of the HDLC reject frames received.
1.3.6.1.4.1.11.2.14.3.7.12RowhdlcRejectFrameSendsread-onlyobsoleteCount of the HDLC reject frames sent.
1.3.6.1.4.1.11.2.14.3.7.13RowhdlcFrameRejectFrameRecsread-onlyobsoleteCount of the HDLC frame reject frames (FRMR) received.
1.3.6.1.4.1.11.2.14.3.8TablehdlcLocalTablenot-accessibleobsoleteA list of hdlcLocal entries.
1.3.6.1.4.1.11.2.14.3.8.1RowhdlcLocalIndexread-onlyobsoleteIndex into Hdlc local statistics table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
1.3.6.1.4.1.11.2.14.3.8.2RowhdlcLocalResetRequestsread-onlyobsoleteCount of local HDLC requests to reset current logical link.
1.3.6.1.4.1.11.2.14.3.8.3RowhdlcLocalResetConfirmsread-onlyobsoleteCount of local HDLC node link reset confirmations.
1.3.6.1.4.1.11.2.14.3.8.4RowhdlcLocalConnectRequestsread-onlyobsoleteCount of local HDLC node attempts to establish logical link.
1.3.6.1.4.1.11.2.14.3.8.5RowhdlcLocalConnectConfirmsread-onlyobsoleteCount of local HDLC node connect request acceptances.
1.3.6.1.4.1.11.2.14.3.8.6RowhdlcLocalDisconnectRequestsread-onlyobsoleteCount of local HDLC node disconnect requests.
1.3.6.1.4.1.11.2.14.3.8.7RowhdlcLocalDisconnectConfirmsread-onlyobsoleteCount of local HDLC node disconnects granted.
1.3.6.1.4.1.11.2.14.3.8.8RowhdlcLocalStateread-onlyobsoleteCurrent local HDLC operational state.
1.3.6.1.4.1.11.2.14.3.8.9RowhdlcLocalAddressread-writeobsoleteThe local HDLC address during communication with the remote node. This object is valid only if a brouter is on the remote end of the HDLC link. It can only be …
1.3.6.1.4.1.11.2.14.3.8.10RowhdlcLocalPhaseread-onlyobsoleteCurrent HDLC operational phase.
1.3.6.1.4.1.11.2.14.3.9TablehdlcRemoteTablenot-accessibleobsoleteA list of hdlcRemote entries.
1.3.6.1.4.1.11.2.14.3.9.1RowhdlcRemoteIndexread-onlyobsoleteIndex into Hdlc remote statistics table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
1.3.6.1.4.1.11.2.14.3.9.2RowhdlcRemoteResetRequestsread-onlyobsoleteCount of remote HDLC requests to reset current logical link.
1.3.6.1.4.1.11.2.14.3.9.3RowhdlcRemoteResetConfirmsread-onlyobsoleteCount of remote HDLC node link reset confirmations.
1.3.6.1.4.1.11.2.14.3.9.4RowhdlcRemoteConnectRequestsread-onlyobsoleteCount of remote HDLC node attempts to establish logical link.
1.3.6.1.4.1.11.2.14.3.9.5RowhdlcRemoteConnectConfirmsread-onlyobsoleteCount of remote HDLC node connect request acceptances.
1.3.6.1.4.1.11.2.14.3.9.6RowhdlcRemoteDisconnectRequestsread-onlyobsoleteCount of remote HDLC node disconnect requests.
1.3.6.1.4.1.11.2.14.3.9.7RowhdlcRemoteStateread-onlyobsoleteCurrent remote HDLC operational state.
1.3.6.1.4.1.11.2.14.3.9.8RowhdlcRemoteAddressread-writeobsoleteThe remote HDLC address during communication with the local node. This object is valid only if a brouter is on the remote end of the HDLC link. It can only be …
1.3.6.1.4.1.11.2.14.3.9.9RowhdlcRemoteXidCommandsread-onlyobsoleteCount of XID commands issued by remote node.
1.3.6.1.4.1.11.2.14.3.9.10RowhdlcRemoteXidResponsesread-onlyobsoleteCount of XID responses issued by remote node.
1.3.6.1.4.1.11.2.14.3.9.11RowhdlcRemoteTestCommandsread-onlyobsoleteCount of Test commands issued by remote node.
1.3.6.1.4.1.11.2.14.3.9.12RowhdlcRemoteTestResponsesread-onlyobsoleteCount of Test responses issued by remote node.
1.3.6.1.4.1.11.2.14.3.9.13RowhdlcRemoteNodeIdread-writeobsoleteIdentification of the node at the opposite end of the HDLC link (eg. brouter or bridge). This object, along with hdlcLocalAddress and hdlcRemoteAddress, consti…
1.3.6.1.4.1.11.2.14.3.10Tablex25Tablenot-accessibleobsoleteA list of X25 entries.
1.3.6.1.4.1.11.2.14.3.10.1Rowx25Indexread-onlyobsoleteIndex into X25 remote timer table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
1.3.6.1.4.1.11.2.14.3.10.2Rowx25T1Timerread-writeobsoletePeriod of time used to timeout retransmits for X25.
1.3.6.1.4.1.11.2.14.3.10.3Rowx25N2Countread-writeobsoleteNumber of retries to be performed during X.25 communication.
1.3.6.1.4.1.11.2.14.3.10.4Rowx25T3Timerread-writeobsoletePeriod of idle time before a disconnect is executed for X25.
1.3.6.1.4.1.11.2.14.4NodeicfSecurity
1.3.6.1.4.1.11.2.14.4.1ScalaricfSecurPasswordread-writemandatoryThis variable contains a string which is used both as the community name for the password community, and as the login password for the console port. This commu…
1.3.6.1.4.1.11.2.14.4.2ScalaricfSecurAuthAnyMgrread-writemandatoryWhen this variable is set to enabled, any manager with a valid community name may perform SET operations on this device. In this configuration, entries in the …
1.3.6.1.4.1.11.2.14.4.3TableicfSecurAuthMgrTablenot-accessiblemandatoryThis table contains a list of addresses of managers that are allowed to perform SET operations on this device, and controls the destination addresses for traps…
1.3.6.1.4.1.11.2.14.4.3.1RowicfSecurAuthMgrEntrynot-accessiblemandatoryAn entry in the icfSecurAuthMgrTable containing information about a single manager.
1.3.6.1.4.1.11.2.14.4.3.1.1ColumnicfAuthMgrIndexread-onlymandatoryThis object contains the index which uniquely identifies this entry in the icfSecurAuthMgrTable.
1.3.6.1.4.1.11.2.14.4.3.1.2ColumnicfAuthMgrIpAddressread-writemandatoryThe IP address of a manager that is allowed to manage this device. Setting this variable to a nonzero value will clear the corresponding instance of the icfAut…
1.3.6.1.4.1.11.2.14.4.3.1.3ColumnicfAuthMgrIpxAddressread-writemandatoryThe IPX address of a manager that is allowed to manage this device. Setting this variable to a valid IPX address will clear the corresponding instance of the i…
1.3.6.1.4.1.11.2.14.4.3.1.4ColumnicfAuthMgrRcvTrapsread-writemandatoryIf this variable is set to enabled, any traps generated by this device will be sent to the manager indicated by the corresponding instance of either icfAuthMgr…
1.3.6.1.4.1.11.2.14.4.4NodeicfSecurIntruder
1.3.6.1.4.1.11.2.14.4.4.1ScalaricfSecurIntruderFlagread-writemandatoryIf this object is set to 'valid', the remainder of the intruder objects contain information about an authentication failure. The Security LED on the device wil…
1.3.6.1.4.1.11.2.14.4.4.2ScalaricfSecurIntruderIpAddressread-onlymandatoryThe IP address of the manager that caused the authentication failure. Only one of icfSecurIntruderIpAddress and icfSecurIntruderIPXAddress will be valid.
1.3.6.1.4.1.11.2.14.4.4.3ScalaricfSecurIntruderIpxAddressread-onlymandatoryThe IPX address of the manager that caused the authentication failure. Only one of icfSecurIntruderIpAddress and icfSecurIntruderIPXAddress will be valid.
1.3.6.1.4.1.11.2.14.4.4.4ScalaricfSecurIntruderTimeread-onlymandatoryThe value of sysUpTime when the authentication failure occurred. A value of 0 indicates that the agent has been reset since this authentication failure occurre…
1.3.6.1.4.1.11.2.14.5NodeicfConfig
1.3.6.1.4.1.11.2.14.5.1TableicfConfigIfTablenot-accessiblemandatoryThis table contains per-interface configuration information that will take effect after the next reset of the device.
1.3.6.1.4.1.11.2.14.5.1.1RowicfConfigIfEntrynot-accessiblemandatoryAn entry in the icfConfigIfTable containing information about a single interface.
1.3.6.1.4.1.11.2.14.5.1.1.1ColumnicfConfigIfIndexread-onlymandatoryThe index of the interface which this information contains configuration information for. The interface identified by a particular value of this index is the s…
1.3.6.1.4.1.11.2.14.5.1.1.2ColumnicfConfigIfIpAddressread-writemandatoryThis variable contains the IP address for this interface which will be used after the next reset of the device.
1.3.6.1.4.1.11.2.14.5.1.1.3ColumnicfConfigIfNetMaskread-writemandatoryThis variable contains the IP subnet mask for this interface which will be used after the next reset of the device.
1.3.6.1.4.1.11.2.14.5.1.1.4ColumnicfConfigIfDefaultGateread-writemandatoryThis variable contains the IP address of the default router for this interface which will be used after the next reset of the device.
1.3.6.1.4.1.11.2.14.5.2ScalaricfConfigIpTTLread-writemandatoryThis variable contains the default IP time to live which will be used after the next reset of the device.
1.3.6.1.4.1.11.2.14.5.3ScalaricfConfigBootpEnableread-writemandatorySetting this flag to 'enabled' (the default) will clear any existing IP address configuration for this device, and will cause the device to use the Bootp proto…
1.3.6.1.4.1.11.2.14.8NodeicfDot12Draft
1.3.6.1.4.1.11.2.14.8.1NodeicfVgRepeater
1.3.6.1.4.1.11.2.14.8.1.1NodeicfVgBasic
1.3.6.1.4.1.11.2.14.8.1.1.1NodeicfVgBasicRptr
1.3.6.1.4.1.11.2.14.8.1.1.1.1ScalaricfVgMACAddressread-onlymandatoryThe MAC address used by the repeater when it initiates training on the uplink port. Repeaters are allowed to train with an assigned MAC address or a null (all …
1.3.6.1.4.1.11.2.14.8.1.1.1.2ScalaricfVgCurrentFramingTyperead-onlymandatoryThe type of framing (802.3 or 802.5) currently in use by the repeater.
1.3.6.1.4.1.11.2.14.8.1.1.1.3ScalaricfVgDesiredFramingTyperead-writemandatoryThe type of framing which will be used by the repeater after the next time it is reset. The value of this object should be preserved across repeater resets and…
1.3.6.1.4.1.11.2.14.8.1.1.1.4ScalaricfVgFramingCapabilityread-onlymandatoryThe type of framing this repeater is capable of supporting.
1.3.6.1.4.1.11.2.14.8.1.1.1.5ScalaricfVgTrainingVersionread-onlymandatoryThe highest version bits (vvv bits) supported by the repeater during training.
1.3.6.1.4.1.11.2.14.8.1.1.1.6ScalaricfVgRepeaterGroupCapacityread-onlymandatoryThe icfVgGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the…
1.3.6.1.4.1.11.2.14.8.1.1.1.7ScalaricfVgRepeaterHealthStateread-onlymandatoryThe icfVgRepeaterHealthState object indicates the operational state of the repeater. The icfVgRepeaterHealthText may be consulted for more specific information…
1.3.6.1.4.1.11.2.14.8.1.1.1.8ScalaricfVgRepeaterHealthTextread-onlymandatoryThe health text object is a text string that provides information relevant to the operational state of the repeater. Agents may use this string to provide deta…
1.3.6.1.4.1.11.2.14.8.1.1.1.9ScalaricfVgRepeaterResetread-writemandatorySetting this object to reset(2) causes the repeater to transition to its initial state as specified in clause 12 [IEEE Draft Std 802.12]. Setting this object t…
1.3.6.1.4.1.11.2.14.8.1.1.1.10ScalaricfVgRepeaterNonDisruptTestread-writemandatorySetting this object to selfTest(2) causes the repeater to perform an agent-specific, non-disruptive self-test that has the following characteristics: a) The na…
1.3.6.1.4.1.11.2.14.8.1.1.2NodeicfVgBasicGroup
1.3.6.1.4.1.11.2.14.8.1.1.2.1TableicfVgBasicGroupTablenot-accessiblemandatoryA table containing information about groups of ports.
1.3.6.1.4.1.11.2.14.8.1.1.2.1.1RowicfVgBasicGroupEntrynot-accessiblemandatoryAn entry in the icfVgBasicGroupTable, containing information about a single group of ports.
1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.1ColumnicfVgGroupIndexnot-accessiblemandatoryThis object identifies the group within the repeater for which this entry contains information. This value is never greater than icfVgRepeaterGroupCapacity.
1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.2ColumnicfVgGroupDescrread-onlymandatoryA textual description of the group. This value should include the full name and version identification of the group's hardware type and indicate how the group …
1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.3ColumnicfVgGroupObjectIDread-onlymandatoryThe vendor's authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-fo…
1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.4ColumnicfVgGroupOperStatusread-onlymandatoryAn object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/o…
1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.5ColumnicfVgGroupLastOperStatusChangeread-onlymandatoryAn object that contains the value of sysUpTime at the time that the value of the icfVgGroupOperStatus object for this group last changed. A value of zero indic…
1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.6ColumnicfVgGroupPortCapacityread-onlymandatoryThe icfVgGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numb…
1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.7ColumnicfVgGroupCablesBundledread-writemandatoryThis configuration flag is used to select either bundled or unbundled cabling. When this flag is 'someCablesBundled(1)' and the port is not promiscuous or casc…
1.3.6.1.4.1.11.2.14.8.1.1.3NodeicfVgBasicPort
1.3.6.1.4.1.11.2.14.8.1.1.3.1TableicfVgBasicPortTablenot-accessiblemandatoryA table containing information about ports.
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1RowicfVgBasicPortEntrynot-accessiblemandatoryAn entry in the icfVgBasicPortTable, containing information about a single port.
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.1ColumnicfVgPortGroupIndexnot-accessiblemandatoryThis object identifies the group containing the port for which this entry contains information.
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.2ColumnicfVgPortIndexnot-accessiblemandatoryThis object identifies the port within the group for which this entry contains information. This value can never be greater than icfVgGroupPortCapacity for the…
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.3ColumnicfVgPortTyperead-onlymandatoryDescribes the type of port. One of the following: cascadeExternal - Port is an uplink with physical connections which are externally visible cascadeInternal - …
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.4ColumnicfVgPortAdminStatusread-writemandatoryPort enable/disable function. Enabling a disabled port will cause training to be initiated. Setting this object to disabled(2) disables the port. A disabled po…
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.5ColumnicfVgPortStatusread-onlymandatoryCurrent status for the port as specified by the PORT_META_STATE in the port process module of clause 12 [IEEE Draft Std 802.12]. During initialization or any l…
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.6ColumnicfVgPortSupportedPromiscModeread-onlymandatoryThis object describes whether the port hardware is capable of supporting promiscuous mode, single address mode (i.e., repeater filters unicasts not addressed t…
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.7ColumnicfVgPortSupportedCascadeModeread-onlymandatoryThis object describes whether the port hardware is capable of supporting cascaded repeaters, end nodes, or both. A port for which icfVgPortType is equal to 'ca…
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.8ColumnicfVgPortAllowedTrainTyperead-writemandatoryThis security object is set by the network manager to configure what type of device is permitted to connect to the port. One of the following values: allowEndN…
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.9ColumnicfVgPortLastTrainConfigread-onlymandatoryThis 16 bit field contains the most recent training configuration in an error-free training frame sent by the end node connected to the port. For cascade ports…
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.10ColumnicfVgPortTrainingResultread-onlymandatoryThis 18 bit field is used to indicate the result of training. It contains two bits which indicate if error-free training frames have been received, and it also…
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.11ColumnicfVgPortPriorityEnableread-writemandatoryA configuration flag used to determine whether the repeater will service high priority requests received on the port as high priority or normal priority. When …
1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.12ColumnicfVgPortMediaTyperead-onlymandatoryThe type of physical media in use. One of the following values: other undefined unknown true state not known pmdMissing PMD device not attached utp4 4-pair uns…
1.3.6.1.4.1.11.2.14.8.1.2NodeicfVgMonitor
1.3.6.1.4.1.11.2.14.8.1.2.1NodeicfVgMonRptr
1.3.6.1.4.1.11.2.14.8.1.2.2NodeicfVgMonGroup
1.3.6.1.4.1.11.2.14.8.1.2.3NodeicfVgMonPort
1.3.6.1.4.1.11.2.14.8.1.2.3.1TableicfVgMonPortTablenot-accessiblemandatoryA table of performance and error statistics for the ports.
1.3.6.1.4.1.11.2.14.8.1.2.3.1.1RowicfVgMonPortEntrynot-accessiblemandatoryAn entry in the icfVgMonPortTable, containing performance and error statistics for a single port.
1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.1ColumnicfVgPortReadableFramesread-onlymandatoryThis object is the number of good frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received…
1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.2ColumnicfVgPortReadableOctetsread-onlymandatoryThis object is a count of the number of octets contained in good frames that have been received on this port. This counter is incremented by OctetCount for eac…
1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.3ColumnicfVgPortUnreadableOctetsread-onlymandatoryThis object is a count of the number of octets contained in invalid frames that have been received on this port. This counter is incremented by OctetCount for …
1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.4ColumnicfVgPortHighPriorityFramesread-onlymandatoryThis object is a count of high priority frames that have been received on this port. This counter is incremented by one for each high priority frame received o…
1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.5ColumnicfVgPortHighPriorityOctetsread-onlymandatoryThis object is a count of the number of octets contained in high priority frames that have been received on this port. This counter is incremented by OctetCoun…
1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.6ColumnicfVgPortBroadcastFramesread-onlymandatoryThis object is a count of broadcast packets that have been received on this port. This counter is incremented by one for each readable frame received on this p…
1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.7ColumnicfVgPortMulticastFramesread-onlymandatoryThis object is a count of multicast packets that have been received on this port. This counter is incremented by one for each readable frame received on this p…
1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.8ColumnicfVgPortIPMFramesread-onlymandatoryThis object is a count of the number of frames that have been received on this port with an invalid packet marker and no PMI errors. A repeater will write an i…
1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.9ColumnicfVgPortDataErrorFramesread-onlymandatoryThis object is a count of errored frames received on this port. This counter is incremented by one for each frame received on this port with any of the followi…
1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.10ColumnicfVgPortPriorityPromotionsread-onlymandatoryThis counter is incremented by one each time the priority promotion timer has expired on this port and a normal priority frame was priority promoted.
1.3.6.1.4.1.11.2.14.8.1.3NodeicfVgAddrTrack
1.3.6.1.4.1.11.2.14.8.1.3.1NodeicfVgAddrTrackRptr
1.3.6.1.4.1.11.2.14.8.1.3.2NodeicfVgAddrTrackGroup
1.3.6.1.4.1.11.2.14.8.1.3.3NodeicfVgAddrTrackPort
1.3.6.1.4.1.11.2.14.8.1.3.3.1TableicfVgAddrTrackTablenot-accessiblemandatoryTable of address mapping information about the ports.
1.3.6.1.4.1.11.2.14.8.1.3.3.1.1RowicfVgAddrTrackEntrynot-accessiblemandatoryAn entry in the table, containing address mapping information about a single port.
1.3.6.1.4.1.11.2.14.8.1.3.3.1.1.1ColumnicfVgAddrLastTrainedAddressread-onlymandatoryThis object is the MAC address of the last station which succeeded in training on this port. A cascaded repeater may train using the null address. If no statio…
1.3.6.1.4.1.11.2.14.8.1.3.3.1.1.2ColumnicfVgAddrTrainedAddrChangesread-onlymandatoryThis counter is incremented by one for each time that the icfVgAddrLastTrainedAddress object for this port has changed.
1.3.6.1.4.1.11.2.14.10NodehpicfAdmin
1.3.6.1.4.1.11.2.14.10.1NodehpicfDomains
1.3.6.1.4.1.11.2.14.10.1.1NodehpicfLLCDomain
1.3.6.1.4.1.11.2.14.11NodehpicfObjects
1.3.6.1.4.1.11.2.14.11.1NodehpicfCommon
1.3.6.1.4.1.11.2.14.11.1.1NodehpicfChain
1.3.6.1.4.1.11.2.14.11.1.1.1ScalarhpicfChainMaxMembersread-onlymandatoryThe maximum number of devices that can be supported on the Distributed Management Chain from this agent.
1.3.6.1.4.1.11.2.14.11.1.1.2ScalarhpicfChainCurMembersread-onlymandatoryThe number of devices currently on the Distributed Management Chain connected to this agent.
1.3.6.1.4.1.11.2.14.11.1.1.3ScalarhpicfChainLastChangeread-onlymandatoryThe value of sysUpTime on this agent the last time a device was added to or removed from the Distributed Management Chain connected to this agent.
1.3.6.1.4.1.11.2.14.11.1.1.4ScalarhpicfChainChangesread-onlymandatoryA count of the number of times devices have been added to or removed from the Distributed Management Chain connected to this agent.
1.3.6.1.4.1.11.2.14.11.1.1.5TablehpicfChainTablenot-accessiblemandatoryA table of boxes currently connected to the same Distributed Management Chain as this agent.
1.3.6.1.4.1.11.2.14.11.1.1.5.1RowhpicfChainEntrynot-accessiblemandatoryAn entry in the table describing a single box on the Distributed Management Chain connected to this device.
1.3.6.1.4.1.11.2.14.11.1.1.5.1.1ColumnhpicfChainIdread-onlymandatoryAn identifier which uniquely identifies this particular box. In practice, this will be a box serial number or MAC address.
1.3.6.1.4.1.11.2.14.11.1.1.5.1.2ColumnhpicfChainObjectIdread-onlymandatoryThe authoritative identification of the box which provides an easy and unambiguous means for determining the type of box.
1.3.6.1.4.1.11.2.14.11.1.1.5.1.3ColumnhpicfChainTimestampread-onlymandatoryThe value of the agent's sysUpTime at which this box was last initialized. If the box has not been initialized since the last reinitialization of the agent, th…
1.3.6.1.4.1.11.2.14.11.1.1.5.1.4ColumnhpicfChainHasAgentread-onlymandatoryThis object will contain the value 'true' if this box contains at least one network management agent capable of responding to SNMP requests, and will contain t…
1.3.6.1.4.1.11.2.14.11.1.1.5.1.5ColumnhpicfChainThisBoxread-onlymandatoryThis object will contain the value 'true' if this entry in the chain table corresponds to the box which contains the agent which is responding to this SNMP req…
1.3.6.1.4.1.11.2.14.11.1.1.5.1.6ColumnhpicfChainLocationread-writemandatoryThis byte is settable by a management station and is not interpreted by the agent. The intent is that a management station can use it to assign an ordering to …
1.3.6.1.4.1.11.2.14.11.1.1.6TablehpicfChainViewTablenot-accessiblemandatoryThis table contains one entry for each box on the Distributed Management Chain for which this agent is able to act as a proxy.
1.3.6.1.4.1.11.2.14.11.1.1.6.1RowhpicfChainViewEntrynot-accessiblemandatoryAn entry in the hpicfChainViewTable containing information about how to proxy to a single box.
1.3.6.1.4.1.11.2.14.11.1.1.6.1.1ColumnhpicfChainViewIdread-onlymandatoryAn identifier which uniquely identifies this particular box. In practice, this will be a box serial number or MAC address.
1.3.6.1.4.1.11.2.14.11.1.1.6.1.2ColumnhpicfChainViewNameread-onlymandatoryThe local name of this box. This is used by the proxy agent for the box to determine which box on the Distributed Management Chain is being addressed. If an ag…
1.3.6.1.4.1.11.2.14.11.1.2NodehpicfChassis
1.3.6.1.4.1.11.2.14.11.1.2.1ScalarhpicfChassisIdread-onlymandatoryAn identifier that uniquely identifies this particular chassis. This will be the same value as the instance of hpicfChainId for this chassis.
1.3.6.1.4.1.11.2.14.11.1.2.2ScalarhpicfChassisNumSlotsread-onlymandatoryThe number of slots in this chassis.
1.3.6.1.4.1.11.2.14.11.1.2.3TablehpicfSlotTablenot-accessiblemandatoryA table that contains information on all the slots in this chassis.
1.3.6.1.4.1.11.2.14.11.1.2.3.1RowhpicfSlotEntrynot-accessiblemandatoryInformation about a slot in a chassis
1.3.6.1.4.1.11.2.14.11.1.2.3.1.1ColumnhpicfSlotIndexread-onlymandatoryThe slot number within the box for which this entry contains information.
1.3.6.1.4.1.11.2.14.11.1.2.3.1.2ColumnhpicfSlotObjectIdread-onlymandatoryThe authoritative identification of the card plugged into this slot in this chassis. A value of { 0 0 } indicates an empty slot.
1.3.6.1.4.1.11.2.14.11.1.2.3.1.3ColumnhpicfSlotLastChangeread-onlymandatoryThe value of the agent's sysUpTime at which a card in this slot was last inserted or removed. If no module has been inserted or removed since the last reinitia…
1.3.6.1.4.1.11.2.14.11.1.2.3.1.4ColumnhpicfSlotDescrread-onlymandatoryA textual description of the card plugged into this slot in this chassis, including the product number and version information.
1.3.6.1.4.1.11.2.14.11.1.2.4TablehpicfEntityTablenot-accessiblemandatoryA table that contains information about the (logical) networking devices contained in this chassis.
1.3.6.1.4.1.11.2.14.11.1.2.4.1RowhpicfEntityEntrynot-accessiblemandatoryInformation about a single logical networking device contained in this chassis.
1.3.6.1.4.1.11.2.14.11.1.2.4.1.1ColumnhpicfEntityIndexread-onlymandatoryAn index that uniquely identifies the logical network device for which this entry contains information.
1.3.6.1.4.1.11.2.14.11.1.2.4.1.2ColumnhpicfEntityFunctionread-onlymandatoryThe generic function provided by the logical network device. The value is a sum. Starting from zero, for each type of generic function that the entity performs…
1.3.6.1.4.1.11.2.14.11.1.2.4.1.3ColumnhpicfEntityObjectIdread-onlymandatoryThe authoritative identification of the logical network device which provides an unambiguous means of determining the type of device. The value of this object …
1.3.6.1.4.1.11.2.14.11.1.2.4.1.4ColumnhpicfEntityDescrread-onlymandatoryA textual description of this device, including the product number and version information. The value of this object is analogous to MIB-II's sysDescr.
1.3.6.1.4.1.11.2.14.11.1.2.4.1.5ColumnhpicfEntityTimestampread-onlymandatoryThe value of the agent's sysUpTime at which this logical network device was last reinitialized. If the entity has not been reinitialized since the last reiniti…
1.3.6.1.4.1.11.2.14.11.1.2.5TablehpicfSlotMapTablenot-accessiblemandatoryA table that contains information about which entities are in which slots in this chassis.
1.3.6.1.4.1.11.2.14.11.1.2.5.1RowhpicfSlotMapEntrynot-accessiblemandatoryA relationship between a slot and an entity in this chassis. Such a relationship exists if the particular slot is occupied by a physical module performing part…
1.3.6.1.4.1.11.2.14.11.1.2.5.1.1ColumnhpicfSlotMapSlotread-onlymandatoryA slot number within the chassis which contains (part of) this entity.
1.3.6.1.4.1.11.2.14.11.1.2.5.1.2ColumnhpicfSlotMapEntityread-onlymandatoryThe entity described in this mapping.
1.3.6.1.4.1.11.2.14.11.1.2.6TablehpicfSensorTablenot-accessiblemandatoryA table that contains information on all the sensors in this chassis
1.3.6.1.4.1.11.2.14.11.1.2.6.1RowhpicfSensorEntrynot-accessiblemandatoryInformation about a sensor in a chassis
1.3.6.1.4.1.11.2.14.11.1.2.6.1.1ColumnhpicfSensorIndexread-onlymandatoryAn index that uniquely identifies the sensor for which this entry contains information.
1.3.6.1.4.1.11.2.14.11.1.2.6.1.2ColumnhpicfSensorObjectIdread-onlymandatoryThe authoritative identification of the kind of sensor this is.
1.3.6.1.4.1.11.2.14.11.1.2.6.1.3ColumnhpicfSensorNumberread-onlymandatoryA number which identifies a particular sensor from other sensors of the same kind. For instance, if there are many temperature sensors in this chassis, this nu…
1.3.6.1.4.1.11.2.14.11.1.2.6.1.4ColumnhpicfSensorStatusread-onlymandatoryActual status indicated by the sensor.
1.3.6.1.4.1.11.2.14.11.1.2.6.1.5ColumnhpicfSensorWarningsread-onlymandatoryThe number of times hpicfSensorStatus has entered the 'warning'(3) state.
1.3.6.1.4.1.11.2.14.11.1.2.6.1.6ColumnhpicfSensorFailuresread-onlymandatoryThe number of times hpicfSensorStatus has entered the 'bad'(2) state.
1.3.6.1.4.1.11.2.14.11.1.2.6.1.7ColumnhpicfSensorDescrread-onlymandatoryA textual description of the sensor.
1.3.6.1.4.1.11.2.14.11.1.2.7TablehpicfChassisAddrTablenot-accessiblemandatoryA table of network addresses for entities in this chassis. The primary use of this table is to map a specific entity address to a specific chassis. Note that t…
1.3.6.1.4.1.11.2.14.11.1.2.7.1RowhpicfChassisAddrEntrynot-accessiblemandatoryAn entry containing a single network address being used by a logical network device in this chassis.
1.3.6.1.4.1.11.2.14.11.1.2.7.1.1ColumnhpicfChasAddrTypenot-accessiblemandatoryThe kind of network address represented in this entry.
1.3.6.1.4.1.11.2.14.11.1.2.7.1.2ColumnhpicfChasAddrAddressnot-accessiblemandatoryThe network address being used by the logical network device associated with this entry, formatted according to the value of the associated instance of hpicfCh…
1.3.6.1.4.1.11.2.14.11.1.2.7.1.3ColumnhpicfChasAddrEntityread-onlymandatoryAn index that uniquely identifies the logical network device in this chassis that is using this network address..
1.3.6.1.4.1.11.2.14.11.1.3NodehpicfDownload
1.3.6.1.4.1.11.2.14.11.1.3.1TablehpicfDownloadTablenot-accessiblemandatoryA table of firmware downloads to this device. There will at any time be either 0 or 1 rows in this table, and the only valid index for this table is 1. It is o…
1.3.6.1.4.1.11.2.14.11.1.3.1.1RowhpicfDownloadEntrynot-accessiblemandatoryThe row in the hpicfDownloadTable containing the download parameters.
1.3.6.1.4.1.11.2.14.11.1.3.1.1.1ColumnhpicfDownloadIndexread-onlymandatoryThe index which uniquely identifies this row. The only legal value for this object is 1.
1.3.6.1.4.1.11.2.14.11.1.3.1.1.2ColumnhpicfDownloadOwnerAddressread-onlymandatoryThe transport address of the management station that initiated this download attempt, formatted according to the value of the associated instance of hpicfDownl…
1.3.6.1.4.1.11.2.14.11.1.3.1.1.3ColumnhpicfDownloadOwnerDomainread-onlymandatoryThe kind of transport service used by the management station that initiated this download attempt.
1.3.6.1.4.1.11.2.14.11.1.3.1.1.4ColumnhpicfDownloadTAddressread-writemandatoryThe transport address of the node to download firmware from, formatted according to the value of the associated instance of hpicfDownloadTDomain. An attempt to…
1.3.6.1.4.1.11.2.14.11.1.3.1.1.5ColumnhpicfDownloadTDomainread-writemandatoryThe kind of transport service to be used for the download. Currently supports snmpUDPDomain and snmpIPXDomain. An attempt to modify this value will fail if the…
1.3.6.1.4.1.11.2.14.11.1.3.1.1.6ColumnhpicfDownloadFilenameread-writemandatoryFilename and path of file to download (maximum length of 63 characters + NULL). An attempt to modify this value will fail if the associated hpicfDownloadStatus…
1.3.6.1.4.1.11.2.14.11.1.3.1.1.7ColumnhpicfDownloadResetTyperead-writemandatoryThe type of reset to perform after completion of the firmware download. Note that not all agents will support all possible values, and there may be other agent…
1.3.6.1.4.1.11.2.14.11.1.3.1.1.8ColumnhpicfDownloadErrorStatusread-onlymandatoryStatus of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following…
1.3.6.1.4.1.11.2.14.11.1.3.1.1.9ColumnhpicfDownloadErrorTextread-onlymandatoryA textual description of the current error status of the firmware download.
1.3.6.1.4.1.11.2.14.11.1.3.1.1.10ColumnhpicfDownloadStatusread-writemandatoryThe status of this download entry. This object may not be set to 'active' unless the following columnar objects exist in this row: hpicfDownloadTAddress, hpicf…
1.3.6.1.4.1.11.2.14.11.1.3.2ScalarhpicfDownloadLogMaxSizeread-onlymandatoryThe maximum number of the download log entries supported by this agent. Note that 0 is a legal value for this variable.
1.3.6.1.4.1.11.2.14.11.1.3.3ScalarhpicfDownloadLogSizeread-onlymandatoryThe number of download log entries currently in the hpicfDownloadLogTable.
1.3.6.1.4.1.11.2.14.11.1.3.4TablehpicfDownloadLogTablenot-accessiblemandatoryA log of the hpicfDownloadSize most recent download attempts to this device. The first entry in the table is the oldest.
1.3.6.1.4.1.11.2.14.11.1.3.4.1RowhpicfDownloadLogEntrynot-accessiblemandatoryAn entry in the hpicfDownloadLogTable containing information about a single download attempt.
1.3.6.1.4.1.11.2.14.11.1.3.4.1.1ColumnhpicfDlLogIndexread-onlymandatoryThe index of this entry in the download log table. Index 1 will always contain the oldest entry. If the table is full when a download attempt is made, the new …
1.3.6.1.4.1.11.2.14.11.1.3.4.1.2ColumnhpicfDlLogOwnerAddressread-onlymandatoryThe transport address of the management station that attempted to initiate a download of this device, formatted according to the value of hpicfDlLastOwnerDomai…
1.3.6.1.4.1.11.2.14.11.1.3.4.1.3ColumnhpicfDlLogOwnerDomainread-onlymandatoryThe kind of transport service used by the management station that attempted to initiate a download of this device.
1.3.6.1.4.1.11.2.14.11.1.3.4.1.4ColumnhpicfDlLogTAddressread-onlymandatoryThe transport address of the node from which this device attempted to download firmware, formatted according to the value of hpicfDlLastTDomain.
1.3.6.1.4.1.11.2.14.11.1.3.4.1.5ColumnhpicfDlLogTDomainread-onlymandatoryThe kind of transport service which was used for the attempt to download firmware to this device.
1.3.6.1.4.1.11.2.14.11.1.3.4.1.6ColumnhpicfDlLogFilenameread-onlymandatoryThe filename from which this device attempted to download firmware.
1.3.6.1.4.1.11.2.14.11.1.3.4.1.7ColumnhpicfDlLogResetTyperead-onlymandatoryThe type of reset requested to be performed after completion of the firmware download attempt.
1.3.6.1.4.1.11.2.14.11.1.3.4.1.8ColumnhpicfDlLogErrorStatusread-onlymandatoryThe result of the attempt to download firmware to this device. The values are the same as the corresponding values of hpicfDownloadErrorStatus.
1.3.6.1.4.1.11.2.14.11.1.3.4.1.9ColumnhpicfDlLogErrorTextread-onlymandatoryA textual description of the final error status of the attempt to download firmware to this device.
1.3.6.1.4.1.11.2.14.11.1.4NodehpicfBasic
1.3.6.1.4.1.11.2.14.11.1.4.1ScalarhpicfResetread-writemandatoryWhen this object is set to to 'normalReset' it results in a 'warm' reset, which does not clear the parameters in NOVRAM to factory defaults. When set to 'facto…
1.3.6.1.4.1.11.2.14.11.1.4.2ScalarhpicfSelfTestread-writemandatorySelf test is invoked by setting this flag to 'stExecute'. When the object changes to 'stSuccess', the test has completed successfully. Icf devices will 'hard-f…
1.3.6.1.4.1.11.2.14.11.2NodehpicfRepeater
1.3.6.1.4.1.11.2.14.11.2.1NodehpRptrBasic
1.3.6.1.4.1.11.2.14.11.2.1.1NodehpRptrBasicGlobal
1.3.6.1.4.1.11.2.14.11.2.1.1.1ScalarhpRptrEntityNameread-onlymandatoryThe local name of this repeater. This is the same value as hpicfEntityName in the case where there is Distributed Management Protocol to access this device. Fo…
1.3.6.1.4.1.11.2.14.11.2.1.1.2ScalarhpRptrThinlanFaultread-writemandatoryWhen set to 'true' this object causes the Fault Led to blink if the ThinLan Port is segmented.
1.3.6.1.4.1.11.2.14.11.2.1.1.3ScalarhpRptrSqeEnabledread-onlymandatoryWhen 'true', this flag indicates that SQE has been detected for the last ten agent transmits and there is a high probability that the SQE switch on the transce…
1.3.6.1.4.1.11.2.14.11.2.1.1.4ScalarhpRptrRobustHealingread-writemandatoryWhen this flag is set to 'true', it enables robust port healing mode. The 802.3 specification states that a segmented port is healed by successfully transmitti…
1.3.6.1.4.1.11.2.14.11.2.1.2NodehpRptrBasicGroup
1.3.6.1.4.1.11.2.14.11.2.1.2.1TablehpRptrBasicGroupTablenot-accessiblemandatoryHP specific extensions to the rptrGroupTable.
1.3.6.1.4.1.11.2.14.11.2.1.2.1.1RowhpRptrBasicGroupEntrynot-accessiblemandatoryAn entry in the table, containing HP extensions for a specific group.
1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.1ColumnhpRptrGrpGroupIndexread-onlymandatoryThe group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of rptrGroupIndex.
1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.2ColumnhpRptrGrpPortsAdminStatusread-onlymandatoryThe hpRptrGrpPortsAdminStatus is a bit map of the state of the rptrPortAdminStatus object for all of the ports in this group. The object has a one bit for each…
1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.3ColumnhpRptrGrpPortsSegStatusread-onlymandatoryThe hpRptrGrpPortsSegStatus is a bit map of the state of the rptrPortAutoPartitionState of all of the ports in this group. The object has a one bit for each po…
1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.4ColumnhpRptrGrpPortsMediaAvailableread-onlymandatoryThe hpRptrGrpPortsMediaAvailable is a bit map of the state of the rpMauMediaAvailable object for all of the ports in this group. The object has a one bit for e…
1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.5ColumnhpRptrGrpPortsLinkbeatEnabledread-onlymandatoryThe hpRptrGrpPortsLinkbeatEnabled is a bit map of the state of the hpRptrPtLinkbeatEnable object for all of the ports in this group. The object has a one bit f…
1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.6ColumnhpRptrGrpPortsOperStatusread-onlymandatoryThe hpRptrGrpPortsOperStatus is a bit map of the state of all hub ports in the group. The object has a 1 bit for each port that is enabled, not segmented, and …
1.3.6.1.4.1.11.2.14.11.2.1.3NodehpRptrBasicPort
1.3.6.1.4.1.11.2.14.11.2.1.3.1TablehpRptrBasicPtTablenot-accessiblemandatoryHP specific extensions to the rptrPortTable.
1.3.6.1.4.1.11.2.14.11.2.1.3.1.1RowhpRptrBasicPtEntrynot-accessiblemandatoryAn entry in the table, containing HP extensions for a specific port.
1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.1ColumnhpRptrPtGroupIndexread-onlymandatoryThe group containing the port for which this entry contains information. This object has the same value as the corresponding instance of rptrPortGroupIndex.
1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.2ColumnhpRptrPtPortIndexread-onlymandatoryThe port within the group for which this entry contains information. This object has the same value as the corresponding instance of rptrPortIndex.
1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.3ColumnhpRptrPtLinkbeatEnableread-writemandatoryWhen this flag is set to 'true' the port's link beat is enabled and when set to 'false' it is disabled.
1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.4ColumnhpRptrPtPolarityReversedread-onlymandatoryThis object is used to indicate that the hub port was wired with the positive/negative polarity of its transmit and receive pairs reversed. Note that the port …
1.3.6.1.4.1.11.2.14.11.2.2NodehpRptrMonitor
1.3.6.1.4.1.11.2.14.11.2.2.1NodehpRptrMonitorGlobal
1.3.6.1.4.1.11.2.14.11.2.2.1.1NodehpRptrMonCounters
1.3.6.1.4.1.11.2.14.11.2.2.1.1.1ScalarhpRptrMonGlobalFramesread-onlymandatoryThe total number of frames of valid frame length that have been received on all ports in this repeater. This counter is the summation of the values of the rptr…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.2ScalarhpRptrMonGlobalOctetsread-onlymandatoryThe total number of octets contained in the valid frames that have been received on the ports in this repeater. This counter is the summation of the values of …
1.3.6.1.4.1.11.2.14.11.2.2.1.1.3ScalarhpRptrMonGlobalFCSErrorsread-onlymandatoryThis counter is incremented by one for each frame received on any port with the FCSError signal asserted and the FramingError and CollisionEvent signals deasse…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.4ScalarhpRptrMonGlobalAlignmentErrorsread-onlymandatoryThis counter is incremented by one for each frame received on any port with the FCSError and FramingError signals asserted and CollisonEvent signal deasserted …
1.3.6.1.4.1.11.2.14.11.2.2.1.1.5ScalarhpRptrMonGlobalFrameTooLongsread-onlymandatoryThis counter is incremented by one for each frame received on any port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If hpRptrM…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.6ScalarhpRptrMonGlobalShortEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on any port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 bi…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.7ScalarhpRptrMonGlobalRuntsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on any port that meets one of the following two conditions. Only one test need be made. a) The Activit…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.8ScalarhpRptrMonGlobalCollisionsread-onlymandatoryThis counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on any port is asserted. This counter differs fr…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.9ScalarhpRptrMonGlobalLateEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on any port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 Std…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.10ScalarhpRptrMonGlobalVeryLongEventsread-onlymandatoryThis counter is incremented by one for each CarrierEvent on any port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9.…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.11ScalarhpRptrMonGlobalDataRateMismatchesread-onlymandatoryThis counter is incremented by one for each frame received on any port that meets all of the following conditions: a) The CollisionEvent signal is not asserted…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.12ScalarhpRptrMonGlobalAutoPartitionsread-onlymandatoryThis counter is incremented by one for each time the repeater has automatically partitioned any port. The conditions that cause port partitioning are specified…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.13ScalarhpRptrMonGlobalErrorsread-onlymandatoryThe total number of errors which have occured on any port in this repeater. This counter is the summation of the values of other error counters, namely: hpRptr…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.14ScalarhpRptrMonGlobalUcastPacketsread-onlymandatoryThis counter is incremented by one for each unicast packet of valid frame length received on any port. This counter is the summation of hpRptrMonPortUcastPacke…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.15ScalarhpRptrMonGlobalBcastPacketsread-onlymandatoryThis counter is incremented by one for each broadcast packet of valid frame length received on any port. This counter is the summation of hpRptrMonPortBcastPac…
1.3.6.1.4.1.11.2.14.11.2.2.1.1.16ScalarhpRptrMonGlobalMcastPacketsread-onlymandatoryThis counter is incremented by one for each multicast packet of valid frame length received on any port. This counter is the summation of hpRptrMonPortMcastPac…
1.3.6.1.4.1.11.2.14.11.2.2.2NodehpRptrMonitorGroup
1.3.6.1.4.1.11.2.14.11.2.2.3NodehpRptrMonitorPort
1.3.6.1.4.1.11.2.14.11.2.2.3.1TablehpRptrMonPtTablenot-accessiblemandatoryTable of HP specific per port monitor objects.
1.3.6.1.4.1.11.2.14.11.2.2.3.1.1RowhpRptrMonPtEntrynot-accessiblemandatoryAn entry in the table, containing per port objects for a single port.
1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.1ColumnhpRptrMonPtGroupIndexread-onlymandatoryThe group containing the port for which this entry contains information. This object has the same value as the corresponding instance of rptrMonitorPortGroupIn…
1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.2ColumnhpRptrMonPtPortIndexread-onlymandatoryThe port within the group for which this entry contains information. This object has the same value as the corresponding instance of rptrMonitorPortIndex.
1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.3ColumnhpRptrMonPtUcastPacketsread-onlymandatoryThis counter is incremented by one for each unicast packet of valid frame length received on this port. This object may not be implemented for repeaters which …
1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.4ColumnhpRptrMonPtBcastPacketsread-onlymandatoryThis counter is incremented by one for each broadcast packet of valid frame length received on this port. This object may not be implemented for repeaters whic…
1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.5ColumnhpRptrMonPtMcastPacketsread-onlymandatoryThis counter is incremented by one for each multicast packet of valid frame length received on this port. This object may not be implemented for repeaters whic…
1.3.6.1.4.1.11.2.14.11.2.3NodehpRptrAddrTrack
1.3.6.1.4.1.11.2.14.11.2.3.1NodehpRptrAddrTrkGlobal
1.3.6.1.4.1.11.2.14.11.2.3.2NodehpRptrAddrTrkGroup
1.3.6.1.4.1.11.2.14.11.2.3.3NodehpRptrAddrTrkPort
1.3.6.1.4.1.11.2.14.11.3NodehpicfVg
1.3.6.1.4.1.11.2.14.11.3.1NodehpVgBasic
1.3.6.1.4.1.11.2.14.11.3.1.1NodehpVgBasicGlobal
1.3.6.1.4.1.11.2.14.11.3.1.1.1ScalarhpVgEntityNameread-onlymandatoryThe local name of this 100BaseVG repeater. This is the same value as hpicfEntityName in the case where there is Distributed Management Protocol to access this …
1.3.6.1.4.1.11.2.14.11.3.1.2NodehpVgBasicGroup
1.3.6.1.4.1.11.2.14.11.3.1.2.1TablehpVgBasicGroupTablenot-accessiblemandatoryHP specific extensions to the vgBasicGroupTable.
1.3.6.1.4.1.11.2.14.11.3.1.2.1.1RowhpVgBasicGroupEntrynot-accessiblemandatoryAn entry in the table, containing HP extensions for a specific group.
1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.1ColumnhpVgGrpGroupIndexnot-accessiblemandatoryThe group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.2ColumnhpVgGrpPortsAdminStatusread-onlymandatoryThe hpVgGrpPortsAdminStatus is a bit map of the state of the icfVgPortAdminStatus object for all of the ports in this group. The object has a one bit for each …
1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.3ColumnhpVgGrpPortsTrainedread-onlymandatoryThe hpVgGrpPortsTrained is a bit map which indicates which ports in this group are currently online. The object has a one bit for each port for which meets the…
1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.4ColumnhpVgGrpPortsInTrainingread-onlymandatoryThe hpVgGrpPortsInTraining is a bit map which indicates which ports in this group are currently in the training state. The object has a one bit for each port w…
1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.5ColumnhpVgGrpPortsCascadedread-onlymandatoryThe hpVgGrpPortsCascaded is a bit map which indicates which ports in this group have trained as cascaded repeater ports. The object has a one bit for each port…
1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.6ColumnhpVgGrpPortsPromiscuousread-onlymandatoryThe hpVgGrpPortsPromiscuous is a bit map which indicates which ports in this group have trained for promiscuous operation. The object has a one bit for each po…
1.3.6.1.4.1.11.2.14.11.3.1.3NodehpVgBasicPort
1.3.6.1.4.1.11.2.14.11.3.1.3.1TablehpVgBasicPortTablenot-accessiblemandatoryHP specific extensions to the vg port table.
1.3.6.1.4.1.11.2.14.11.3.1.3.1.1RowhpVgBasicPortEntrynot-accessiblemandatoryHP extended information about a specific vg port.
1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.1ColumnhpVgPortGroupIndexnot-accessiblemandatoryThe group that contains the port for which this entry contains information.
1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.2ColumnhpVgPortIndexnot-accessiblemandatoryThe port within the group for which this entry contains information.
1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.3ColumnhpVgPortPolarityReversedread-onlymandatoryThis object is used to indicate that the hub port was wired with the positive/negative polarity of its wire pairs reversed. Note that the port will continue to…
1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.4ColumnhpVgPortWireSkewErrorread-onlymandatoryThis object is used to indicate that a wire skew error has been detected on this port.
1.3.6.1.4.1.11.2.14.11.3.2NodehpVgMonitor
1.3.6.1.4.1.11.2.14.11.3.2.1NodehpVgMonitorGlobal
1.3.6.1.4.1.11.2.14.11.3.2.1.1NodehpVgMonCounters
1.3.6.1.4.1.11.2.14.11.3.2.1.1.1ScalarhpVgMonGlbReadableFramesread-onlymandatoryThis object is the total number of good frames of valid frame length that have been received on all ports in this repeater. This counter is the summation of th…
1.3.6.1.4.1.11.2.14.11.3.2.1.1.2ScalarhpVgMonGlbReadableOctetsread-onlymandatoryThis object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summat…
1.3.6.1.4.1.11.2.14.11.3.2.1.1.3ScalarhpVgMonGlbUnreadableOctetsread-onlymandatoryThis object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the sum…
1.3.6.1.4.1.11.2.14.11.3.2.1.1.4ScalarhpVgMonGlbHighPriorityFramesread-onlymandatoryThis object is a count of the total number of high priority frames that have been received on all ports in this repeater. This counter is a summation of the va…
1.3.6.1.4.1.11.2.14.11.3.2.1.1.5ScalarhpVgMonGlbHighPriorityOctetsread-onlymandatoryThis object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a…
1.3.6.1.4.1.11.2.14.11.3.2.1.1.6ScalarhpVgMonGlbBroadcastFramesread-onlymandatoryThis object is a count of the total number of broadcast packets that have been received on all ports in this repeater. This counter is a summation of the value…
1.3.6.1.4.1.11.2.14.11.3.2.1.1.7ScalarhpVgMonGlbMulticastFramesread-onlymandatoryThis object is a count of the total number of multicast packets that have been received on all ports in this repeater. This counter is a summation of the value…
1.3.6.1.4.1.11.2.14.11.3.2.1.1.8ScalarhpVgMonGlbIPMFramesread-onlymandatoryThis object is a count of the total number of frames that have been received on all ports in this repeater with an invalid packet marker. This counter is a sum…
1.3.6.1.4.1.11.2.14.11.3.2.1.1.9ScalarhpVgMonGlbDataErrorFramesread-onlymandatoryThis object is a count of the total number of errored frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPort…
1.3.6.1.4.1.11.2.14.11.3.2.1.1.10ScalarhpVgMonGlbPriorityPromotionsread-onlymandatoryThis object is a count of the total number of times the priority promotion timer has expired on any port in this repeater. This counter is a summation of the v…
1.3.6.1.4.1.11.2.14.11.3.2.2NodehpVgMonitorGroup
1.3.6.1.4.1.11.2.14.11.3.2.3NodehpVgMonitorPort
1.3.6.1.4.1.11.2.14.11.4NodehpicfGenericRepeater
1.3.6.1.4.1.11.2.14.11.4.1NodehpGRpBasic
1.3.6.1.4.1.11.2.14.11.4.1.1NodehpGRpBasicGlobal
1.3.6.1.4.1.11.2.14.11.4.1.1.1ScalarhpGRpSelfHealEnableread-writemandatoryThis flag controls whether or not the device will send self healing packets. Self healing packets are normally sent once per second by the agent when no other …
1.3.6.1.4.1.11.2.14.11.4.1.2NodehpGRpBasicGroup
1.3.6.1.4.1.11.2.14.11.4.1.3NodehpGRpBasicPort
1.3.6.1.4.1.11.2.14.11.4.2NodehpGRpMonitor
1.3.6.1.4.1.11.2.14.11.4.3NodehpGRpAddrTrack
1.3.6.1.4.1.11.2.14.12NodehpicfNotifications
1.3.6.1.4.1.11.2.14.12.1NodehpicfCommonTraps
1.3.6.1.4.1.11.2.14.12.1.1NodehpicfChainAdditionAn hpicfChainAddition trap indicates that a new node has been added to the Distributed Management Chain connected to this agent. The hpicfChainId returned is t…
1.3.6.1.4.1.11.2.14.12.1.2NodehpicfChainRemovalAn hpicfChainRemoval trap indicates that a node has been removed from the Distributed Management Chain connected to this agent. The hpicfChainId returned is th…
1.3.6.1.4.1.11.2.14.12.2Nodehpicf8023RptrTraps
1.3.6.1.4.1.11.2.14.12.3NodehpicfVgRptrTraps
1.3.6.1.4.1.11.2.14.12.4NodehpicfGenRptrTraps
Type Definitions
NameSyntaxStatusDescription
MacAddressOCTET STRING (SIZE (6))
RowStatusINTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) }
TAddressOCTET STRING (SIZE (0..127))
TruthValueINTEGER { true(1), false(2) }