HPI-B0101-MIB
707 objects
HPI MIB for SAF-HPI B-01-01. When using this MIB it is strongly recommended to use the SNMPv3 protocol due to security concerns. Additionally if fine grain access configuration is desired, for example to manage access to individual columnar objects, the SNMP configuration should use VACM (View Based Access Control Model - RFC 2275). This MIB defines the HPI instrumentation based on 'Service Availability Forum Hardware Platform Interface' (SAI-HPI-B.01.01). This MIB module defines a set of objects that allow the management of entities on a variety of hardware platforms. The abstractions presented in this MIB are derived from the Service Availability Forum Hardware Platform Interface specification version SAI-HPI-B.01.01. The MIB views a hardware platform as a collections of physical entities that can be managed individually. A logical collection of entities comprises a management domain. Each entity has a common set of attributes reflected in the entity table. Entities may have additional categorical attributes that may exist in one or more of the hotswap table, control table, sensor table, watchdog table, inventory control table and config table. The hotswap table defines management attributes for an entity that supports hotswap, generally referred to as a FRU. The controls table defines variables for reading and setting controls associated with an entity. The sensors table defines variables for reading sensors associated with an entity as well as controlling event generation for that sensor. The watchdog table defines variables for reading watchdog associated with an entitry. The inventory control defines variables for reading inventory resources and changing the settings.
Imported Objects
| SAF-TC-MIB | hpiD |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowPointer RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18568.2.1.1 | IdentityhpiB0101 | HPI MIB for SAF-HPI B-01-01. When using this MIB it is strongly recommended to use the SNMPv3 protocol due to security concerns. Additionally if fine grain acc… | ||
| 1.3.6.1.4.1.18568.2.1.1.1 | NodehpiAdministration | |||
| 1.3.6.1.4.1.18568.2.1.1.1.1 | ScalarsaHpiHpiVersion | read-only | current | This scalar object provides the version of HPI this MIB is based on. |
| 1.3.6.1.4.1.18568.2.1.1.1.2 | ScalarsaHpiAgentVersion | read-only | current | This scalar object provides the version of the HPI-MIB SNMP implementation. |
| 1.3.6.1.4.1.18568.2.1.1.1.3 | ScalarsaHpiSnmpResourceId | read-only | current | This scalar object provides the Resource Id of the domain the HPI-MIB SNMP implementation is running on. This is to help prevent powering down the machine prov… |
| 1.3.6.1.4.1.18568.2.1.1.1.4 | ScalarsaHpiDiscover | read-write | current | This scalar object forces the discovery of all resources and associated domains by the underlying management service. |
| 1.3.6.1.4.1.18568.2.1.1.2 | NodehpiDomain | |||
| 1.3.6.1.4.1.18568.2.1.1.2.1 | ScalarsaHpiDomainInfoActiveEntries | read-only | current | The number of Domain entries present in the system. |
| 1.3.6.1.4.1.18568.2.1.1.2.2 | TablesaHpiDomainInfoTable | not-accessible | current | This table represents the management attributes common to all Domains within the managed platform. The logical domain ID and the entity ID are used to address … |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1 | RowsaHpiDomainInfoEntry | not-accessible | current | Domain Info: This structure is used to store the information regarding the domain including information regarding the domain reference table (DRT) and the reso… |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.1 | ColumnsaHpiDomainId | not-accessible | current | Domain identifier. The number is unique within the system. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.2 | ColumnsaHpiDomainCapabilities | read-only | current | Domain Capabilities This definition defines the capabilities of a given domain. A domain may support any number of capabilities , each capability seperated by … |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.3 | ColumnsaHpiDomainIsPeer | read-only | current | Indicates that this domain participates in a peer relationship. TRUE = Domain is peer. FALSE = Domain is not peer |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.4 | ColumnsaHpiDomainTagTextType | read-write | current | Information tag associated with domain. See Definition for SaHpiTextType for more details. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.5 | ColumnsaHpiDomainTagTextLanguage | read-write | current | Information tag associated with domain. See Definition for SaHpiTextLanguage for more details. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.6 | ColumnsaHpiDomainTag | read-write | current | Information tag associated with domain. The type of data is specified by saHpiDomainTagTextType and saHpiDomainTagLanguage. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.7 | ColumnsaHpiDomainReferenceUpdateCount | read-only | current | This count is incremented any time the DRT table is changed. It rolls over to zero when the maximum value (2^32) is reached. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.8 | ColumnsaHpiDomainReferenceUpdateTimestamp | read-only | current | This timestamp is set any time the DRT table is changed. Refer to SaHpiTime for full description. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.9 | ColumnsaHpiDomainResourcePresenceUpdateCount | read-only | current | This count is incremented any time the RPT is changed. It rolls over to zero when the maximum (2^32) value is reached |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.10 | ColumnsaHpiDomainResourcePresenceUpdateTimestamp | read-only | current | This timestamp is set any time the RPT table is changed. Refer to SaHpiTime for full description. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.11 | ColumnsaHpiDomainAlarmUpdateCount | read-only | current | This count is incremented any time the DAT is changed. It rolls over to zero when the maximum value (2^32) is reached |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.12 | ColumnsaHpiDomainAlarmUpdateTimestamp | read-only | current | This timestamp is set any time the DAT is changed. Refer to SaHpiTime for full description. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.13 | ColumnsaHpiDomainActiveAlarms | read-only | current | Count of active alarms in the DAT. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.14 | ColumnsaHpiDomainCriticalAlarms | read-only | current | Count of active critical alarms in the DAT. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.15 | ColumnsaHpiDomainMajorAlarms | read-only | current | Count of active major alarms in the DAT. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.16 | ColumnsaHpiDomainMinorAlarms | read-only | current | Count of active minor alarms in the DAT. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.17 | ColumnsaHpiDomainAlarmUserLimit | read-only | current | Maximum User Alarms that can be added to DAT. 0=no fixed limit. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.18 | ColumnsaHpiDomainAlarmOverflow | read-only | current | Set to True if there are one or more non-User Alarms that are missing from the DAT because of space limitations. |
| 1.3.6.1.4.1.18568.2.1.1.2.2.1.19 | ColumnsaHpiDomainGuid | read-only | current | The GUID is used to uniquely identify a domain. A GUID value of zero is not valid and indicates that the domain does not have an associated GUID. GUID - Global… |
| 1.3.6.1.4.1.18568.2.1.1.2.3 | ScalarsaHpiDomainReferenceActiveEntries | read-only | current | The number of DRT entries present in the saHpiDomainReferenceTable. |
| 1.3.6.1.4.1.18568.2.1.1.2.4 | TablesaHpiDomainReferenceTable | not-accessible | current | A table, provided by an HPI implementation, of additional domains related to the current domain. |
| 1.3.6.1.4.1.18568.2.1.1.2.4.1 | RowsaHpiDomainReferenceEntry | not-accessible | current | The Domain Reference Table (DRT) which provides information about other domains associated with the domain. The two saHpiDomainId indices for this table are us… |
| 1.3.6.1.4.1.18568.2.1.1.2.4.1.1 | ColumnsaHpiDomainRef | not-accessible | current | If a Peer or child domain exists this is the DomainID. |
| 1.3.6.1.4.1.18568.2.1.1.2.4.1.2 | ColumnsaHpiDomainReferenceIsPeer | read-only | current | Indicates that this domain participates in a peer relationship. TRUE = Domain is peer. FALSE = Domain is not peer (is a child) |
| 1.3.6.1.4.1.18568.2.1.1.2.5 | ScalarsaHpiDomainAlarmActiveEntries | read-only | current | The number of DomainAlarm entries present in the system. |
| 1.3.6.1.4.1.18568.2.1.1.2.6 | TablesaHpiDomainAlarmTable | not-accessible | current | This table represents the management attributes common to all Domains within the managed platform. The logical domain ID and the entity ID are used to address … |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1 | RowsaHpiDomainAlarmEntry | not-accessible | current | This table is used to store alarm information. |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.1 | ColumnsaHpiDomainAlarmId | not-accessible | current | DomainAlarm Id |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.2 | ColumnsaHpiDomainAlarmTimestamp | read-only | current | Time when alarm was added to the DAT table. Refer to SaHpiTime for full description. |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.3 | ColumnsaHpiDomainAlarmSeverity | read-create | current | Severity of alarm. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.4 | ColumnsaHpiDomainAlarmAcknowledged | read-create | current | Use this columnar object to acknowledge a specific Alarm. An HPI SNMP Manager acknowledges an alarm to indicate that it is aware of the alarm and to influence … |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.5 | ColumnsaHpiDomainAlarmAckBySeverity | read-create | current | Use this columnar object to acknowledge Alarms based on severity. An HPI SNMP Manager acknowledges an alarm to indicate that it is aware of the alarm and to in… |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.6 | ColumnsaHpiDomainAlarmCondStatusCondType | read-create | current | Enumeration of status condition type. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.7 | ColumnsaHpiDomainAlarmCondEntityPath | read-create | current | See Textual-Convention for details. |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.8 | ColumnsaHpiDomainAlarmCondSensorNum | read-create | current | Sensor associated with status Only valid if saHpiDomainAlarmCondStatusCondType is sensor(1). |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.9 | ColumnsaHpiDomainAlarmCondEventState | read-create | current | Sensor event state. Only valid if saHpiDomainAlarmCondStatusCondType is sensor(1). |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.10 | ColumnsaHpiDomainAlarmCondNameValue | read-create | current | AIS compatible identifier associated with Status condition. The Service Availability(TM) Forum Application Interface Specification standardizes the interface b… |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.11 | ColumnsaHpiDomainAlarmCondMid | read-create | current | Manufacturer Id associated with status condition, required when saHpiDomainAlarmCondStatusCondType is oem(3). |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.12 | ColumnsaHpiDomainAlarmCondTextType | read-create | current | Optional data associated with status condition associated with Domain. For more details, see textual definition and saHpiDomainAlarmCondDomainTextType and saHp… |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.13 | ColumnsaHpiDomainAlarmCondTextLanguage | read-create | current | Optional data associated with status condition. For more details, see textual definition |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.14 | ColumnsaHpiDomainAlarmCondText | read-create | current | Optional data associated with status condition. The type of date is specified by saHpiDomainAlarmCondDomainAlarmaTextType and saHpiDomainAlarmCondDomainAlarmaT… |
| 1.3.6.1.4.1.18568.2.1.1.2.6.1.15 | ColumnsaHpiDomainAlarmRowStatus | read-create | current | This columnar object contains the status of the row and is also used to perform add and delete operations. The status column uses four defined values: - `activ… |
| 1.3.6.1.4.1.18568.2.1.1.2.7 | ScalarsaHpiResourceActiveEntries | read-only | current | The number of RPT entries present in the system. This field is used to determine if new resources have been added or existing removed. |
| 1.3.6.1.4.1.18568.2.1.1.2.8 | TablesaHpiResourceTable | not-accessible | current | The logical domain ID and the Resource ID are used to address a Resource. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1 | RowsaHpiResourceEntry | not-accessible | current | A User access the Resource Presence Table (RPT) for each domain in the system. This table represents up-to-date information on the resources currently present … |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.1 | ColumnsaHpiResourceId | read-only | current | Resource identifier. The SAHPI_UNSPECIFIED_RESOURCE_ID value is used to specify the Domain Event Log and to specify that there is no resource for such things a… |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.2 | ColumnsaHpiResourceEntryId | not-accessible | current | This index is here to help facilitate browsing a known resources RDR's. For example to find the first RDR's specify a value of SAHPI_FIRST_ENTRY. See textual-c… |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.3 | ColumnsaHpiResourceEntityPath | read-only | current | See Texual-Convention for details. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.4 | ColumnsaHpiResourceCapabilities | read-only | current | Resource Capabilities This definition defines the capabilities of a given resource by using a bit values. One resource may support any number of capabilities u… |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.5 | ColumnsaHpiResourceHotSwapCapabilities | read-only | current | This definition defines the managed hot swap capabilities of a given resource. autoExtractReadOnly(1) This capability indicates if the hot swap autoextract tim… |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.6 | ColumnsaHpiResourceSeverity | read-write | current | Indicates the criticality that should be raised when the resource is not responding. Note: The enumerated named have +1 added as opposed to the SAI-HPI-B.01.01… |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.7 | ColumnsaHpiResourceFailed | read-only | current | TRUE = Resource Not Functional. FALSE = Resource Functional |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.8 | ColumnsaHpiResourceInfoResourceRev | read-only | current | saHpiResourceInfo contains static configuration data concerning the management controller associated with the resource, or the resource itself. Note this infor… |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.9 | ColumnsaHpiResourceInfoSpecificVer | read-only | current | See saHpiResourceInfoResourceRev in SAI-HPI-B.01.01 for overview. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.10 | ColumnsaHpiResourceInfoDeviceSupport | read-only | current | See saHpiResourceInfoResourceRev in SAI-HPI-B.01.01 for overview. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.11 | ColumnsaHpiResourceInfoManufacturerId | read-only | current | See saHpiResourceInfoResourceRev in SAI-HPI-B.01.01 for overview. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.12 | ColumnsaHpiResourceInfoProductId | read-only | current | See saHpiResourceInfoResourceRev in SAI-HPI-B.01.01 for overview. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.13 | ColumnsaHpiResourceInfoFirmwareMajorRev | read-only | current | See saHpiResourceInfoResourceRev in SAI-HPI-B.01.01 for overview. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.14 | ColumnsaHpiResourceInfoFirmwareMinorRev | read-only | current | See saHpiResourceInfoResourceRev in SAI-HPI-B.01.01 for overview. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.15 | ColumnsaHpiResourceInfoAuxFirmwareRev | read-only | current | See saHpiResourceInfoResourceRev in SAI-HPI-B.01.01 for overview. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.16 | ColumnsaHpiResourceInfoGuid | read-only | current | The GUID is used to uniquely identify a Resource. A GUID value of zero is not valid and indicates that the Resource does not have an associated GUID. See textu… |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.17 | ColumnsaHpiResourceTagTextType | read-write | current | This object contains the resource tag information. See textual convention for more information. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.18 | ColumnsaHpiResourceTagTextLanguage | read-write | current | This object contains the resource tag text language enumeration. See textual convention for more information. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.19 | ColumnsaHpiResourceTag | read-write | current | Resource tag. The type of data is specified by saHpiResourceTagTextType and saHpiResourceTagLanguage. |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.20 | ColumnsaHpiResourceParmControl | read-write | current | This object allows the user to save and restore parameters associated with a specific resource. Valid actions for this function include: undefined(0) - resourc… |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.21 | ColumnsaHpiResourceResetAction | read-write | current | This function gets the reset state of an entity, allowing the HPI SNMP Manager to determine if the entity is being held with its reset asserted. If a resource … |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.22 | ColumnsaHpiResourcePowerAction | read-write | current | This function gets the power state of an entity, allowing the HPI SNMP Manager to determine if the entity is currently powered on or off. If a resource manages… |
| 1.3.6.1.4.1.18568.2.1.1.2.8.1.23 | ColumnsaHpiResourceIsHistorical | not-accessible | current | This columnar object, which is part of the index for every resource, determines if this resource is historical. Historical meaning not present in the system an… |
| 1.3.6.1.4.1.18568.2.1.1.2.11 | NodehpiHotSwap | |||
| 1.3.6.1.4.1.18568.2.1.1.2.11.1 | TablesaHpiAutoInsertTimeoutTable | not-accessible | current | In support of HPI saHpiAutoInsertTimeoutGet, and saHpiAutoInsertTimeoutSet. |
| 1.3.6.1.4.1.18568.2.1.1.2.11.1.1 | RowsaHpiAutoInsertTimeoutEntry | not-accessible | current | Table of domains with a timeout for how long to wait before the default auto-insertion policy is invoked on a resource within a specific domain. |
| 1.3.6.1.4.1.18568.2.1.1.2.11.1.1.1 | ColumnsaHpiAutoInsertTimeoutForInsert | read-write | current | This function allows the HPI SNMP Manager to configure a timeout for how long to wait before the default auto-insertion policy is invoked on a resource within … |
| 1.3.6.1.4.1.18568.2.1.1.2.11.2 | ScalarsaHpiHotSwapActiveEntries | read-only | current | The number of HotSwap entries present in the system. |
| 1.3.6.1.4.1.18568.2.1.1.2.11.3 | TablesaHpiHotSwapTable | not-accessible | current | This table represents management attributes common to all hot swappable resources in the managed platform. The entries in this table are straight from the HPI … |
| 1.3.6.1.4.1.18568.2.1.1.2.11.3.1 | RowsaHpiHotSwapEntry | not-accessible | current | An entry describing a particular hot swappable entity. |
| 1.3.6.1.4.1.18568.2.1.1.2.11.3.1.1 | ColumnsaHpiHotSwapIndicator | read-write | current | A FRU associated with a hot-swappable resource may include a hot swap indicator such as a blue LED. This indicator signifies that the FRU is ready for removal.… |
| 1.3.6.1.4.1.18568.2.1.1.2.11.3.1.2 | ColumnsaHpiHotSwapState | read-write | current | Refer to the textual convention for full details. |
| 1.3.6.1.4.1.18568.2.1.1.2.11.3.1.3 | ColumnsaHpiHotSwapExtractTimeout | read-write | current | This function allows the HPI SNMP Manager to configure a timeout for how long to wait before the default auto-extraction policy is invoked. This function accep… |
| 1.3.6.1.4.1.18568.2.1.1.2.11.3.1.4 | ColumnsaHpiHotSwapActionRequest | read-write | current | A resource supporting hot swap typically requires a physical action on the associated FRU to invoke an insertion or extraction process. An insertion process is… |
| 1.3.6.1.4.1.18568.2.1.1.2.11.3.1.5 | ColumnsaHpiHotSwapPolicyCancel | read-write | current | A resource supporting hot swap typically supports default policies for insertion and extraction. On insertion, the default policy may be for the resource to tu… |
| 1.3.6.1.4.1.18568.2.1.1.2.11.3.1.6 | ColumnsaHpiHotSwapResourceRequest | read-write | current | Depending on the values, the user can: - use this function to request a resource to return to the ACTIVE state from the extractionPending(4) state in order to … |
| 1.3.6.1.4.1.18568.2.1.1.3 | NodehpiEvents | |||
| 1.3.6.1.4.1.18568.2.1.1.3.1 | Nodeevents | |||
| 1.3.6.1.4.1.18568.2.1.1.3.1.1 | ScalarsaHpiEventLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.2 | ScalarsaHpiEventActiveEntries | read-only | current | The number of events present in this table. 'saHpiEventCount' represents the total of all events types currently stored in the 'saHpiEventTable.' saHpiDomainEv… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.3 | TablesaHpiEventTable | not-accessible | current | Event Master table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.3.1 | RowsaHpiEventEntry | not-accessible | current | This table presents the list of all events which are present in the HPI system. The implementation decides how to manipulate the events as they reach a large n… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.3.1.1 | ColumnsaHpiEventRowPointer | not-accessible | current | OID value points to any of the other nine tables: saHpiResourceEventTable, saHpiDomainEventTable, saHpiSensorEventTable, saHpiSensorEnableChangeTable, saHpiHot… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.3.1.2 | ColumnsaHpiEventSeverity | read-only | current | Severity of event. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.3.1.3 | ColumnsaHpiEventSaHpiTime | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.3.1.4 | ColumnsaHpiEventType | read-only | current | Event type. Note: The enumerated named have +1 added as opposed to the SAI-HPI-B.01.01 spec for the same constants. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.4 | ScalarsaHpiResourceEventLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.5 | ScalarsaHpiResourceEventActiveEntries | read-only | current | This scalar object represents the subset of events that are Resource Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.6 | TablesaHpiResourceEventTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.6.1 | RowsaHpiResourceEventEntry | not-accessible | current | Resource events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.6.1.1 | ColumnsaHpiResourceEventEntryId | not-accessible | current | Arbitrary table index. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.6.1.2 | ColumnsaHpiResourceEventTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.6.1.3 | ColumnsaHpiResourceEventType | read-only | current | Resource events are sent to indicate the failure or subsequent restoration of a resource. Resource events can also be used to announce the addition of a non-FR… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.7 | ScalarsaHpiDomainEventLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.8 | ScalarsaHpiDomainEventActiveEntries | read-only | current | This scalar object represents the subset of events that are Domain events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.9 | TablesaHpiDomainEventTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.9.1 | RowsaHpiDomainEventEntry | not-accessible | current | Domain events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.9.1.1 | ColumnsaHpiDomainEventEntryId | not-accessible | current | This columnar object is an index for Domain Events in the table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.9.1.2 | ColumnsaHpiDomainEventTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.9.1.3 | ColumnsaHpiDomainEventType | read-only | current | This object defines the enumeration for the domain to announce the addition of domain references and the removal of domain references to the Domain Table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.10 | ScalarsaHpiSensorEventLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.11 | ScalarsaHpiSensorEventActiveEntries | read-only | current | This scalar object represents the subset of events that are Sensor Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12 | TablesaHpiSensorEventTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1 | RowsaHpiSensorEventEntry | not-accessible | current | Sensor events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.1 | ColumnsaHpiSensorEventEntryId | not-accessible | current | Arbitrary table index. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.2 | ColumnsaHpiSensorEventTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.3 | ColumnsaHpiSensorEventType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.4 | ColumnsaHpiSensorEventCategory | read-only | current | Event category: See TEXTUAL-CONVENTION, SaHpiEventCategory. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.5 | ColumnsaHpiSensorEventAssertion | read-only | current | Sensor Events and Sensor Event States: Each Event State may be asserted or deasserted. The set of Event States a sensor may support is defined by the sensor's … |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.6 | ColumnsaHpiSensorEventState | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.7 | ColumnsaHpiSensorEventOptionalData | read-only | current | See textual convention aHpiOptionalData. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.8 | ColumnsaHpiSensorEventTriggerReadingType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.9 | ColumnsaHpiSensorEventTriggerReading | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.10 | ColumnsaHpiSensorEventTriggerThresholdType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.11 | ColumnsaHpiSensorEventTriggerThreshold | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.12 | ColumnsaHpiSensorEventPreviousState | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.13 | ColumnsaHpiSensorEventCurrentState | read-only | current | Refer to SaHpiEventState textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.14 | ColumnsaHpiSensorEventOem | read-only | current | Reserved for Oem use. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.12.1.15 | ColumnsaHpiSensorEventSpecific | read-only | current | Event Specific information. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.13 | ScalarsaHpiSensorEnableChangeEventLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.14 | ScalarsaHpiSensorEnableChangeEventActiveEntries | read-only | current | This scalar object represents the subset of events that are Sensor Enable ChangeEvents. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15 | TablesaHpiSensorEnableChangeEventTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15.1 | RowsaHpiSensorEnableChangeEventEntry | not-accessible | current | Sensor Enable Change events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15.1.1 | ColumnsaHpiSensorEnableChangeEventEntryId | not-accessible | current | Arbitrary table index. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15.1.2 | ColumnsaHpiSensorEnableChangeEventTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15.1.3 | ColumnsaHpiSensorEnableChangeEventType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15.1.4 | ColumnsaHpiSensorEnableChangeEventCategory | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15.1.5 | ColumnsaHpiSensorEnableChangeEventEnabled | read-only | current | Current sensor enable status. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15.1.6 | ColumnsaHpiSensorEnableChangeEventEventsEnabled | read-only | current | Current event enable status. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15.1.7 | ColumnsaHpiSensorEnableChangeEventAssertEvents | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15.1.8 | ColumnsaHpiSensorEnableChangeEventDeassertEvents | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15.1.9 | ColumnsaHpiSensorEnableChangeEventOptionalData | read-only | current | See textual convention SaHpiOptionalData. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.15.1.10 | ColumnsaHpiSensorEnableChangeEventState | read-only | current | Current set of asserted Event states. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.16 | ScalarsaHpiHotSwapEventLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.17 | ScalarsaHpiHotSwapEventActiveEntries | read-only | current | This scalar object represents the subset of events that are HotSwap Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.18 | TablesaHpiHotSwapEventTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.18.1 | RowsaHpiHotSwapEventEntry | not-accessible | current | Hot Swap events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.18.1.1 | ColumnsaHpiHotSwapEventEntryId | not-accessible | current | Arbitrary table index. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.18.1.2 | ColumnsaHpiHotSwapEventTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.18.1.3 | ColumnsaHpiHotSwapEventState | read-only | current | Refer to the textual convention for full details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.18.1.4 | ColumnsaHpiHotSwapEventPreviousState | read-only | current | Refer to the textual convention for full details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.19 | ScalarsaHpiWatchdogEventLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.20 | ScalarsaHpiWatchdogEventActiveEntries | read-only | current | This scalar object represents the subset of events that are Watchdog Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.21 | TablesaHpiWatchdogEventTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.21.1 | RowsaHpiWatchdogEventEntry | not-accessible | current | Watchdog events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.21.1.1 | ColumnsaHpiWatchdogEventEntryId | not-accessible | current | Arbitrary table index. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.21.1.2 | ColumnsaHpiWatchdogEventTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.21.1.3 | ColumnsaHpiWatchdogEventAction | read-only | current | These enumerations represent the possible actions to be taken upon watchdog timer timeout and the events that are generated for watchdog actions. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.21.1.4 | ColumnsaHpiWatchdogEventPreTimerAction | read-only | current | These enumerations represent the possible types of interrupts that may be triggered by a watchdog pre-timer event. The actual meaning of these operations may d… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.21.1.5 | ColumnsaHpiWatchdogEventUse | read-only | current | Watchdog Timer Use These enumerations represent the possible watchdog users that may have caused the watchdog to expire. For instance, if watchdog is being use… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.22 | ScalarsaHpiSoftwareEventLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.23 | ScalarsaHpiSoftwareEventActiveEntries | read-only | current | This scalar object represents the subset of events that are Software Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.24 | TablesaHpiSoftwareEventTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.24.1 | RowsaHpiSoftwareEventEntry | not-accessible | current | Software events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.24.1.1 | ColumnsaHpiSoftwareEventEntryId | not-accessible | current | Arbitrary table index. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.24.1.2 | ColumnsaHpiSoftwareEventTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.24.1.3 | ColumnsaHpiSoftwareEventManufacturerIdT | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.24.1.4 | ColumnsaHpiSoftwareEventType | read-only | current | The following type defines the types of events that can be reported by the HPI software implementation. Audit events report a discrepancy in the audit process.… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.24.1.5 | ColumnsaHpiSoftwareEventTextType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.24.1.6 | ColumnsaHpiSoftwareEventTextLanguage | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.24.1.7 | ColumnsaHpiSoftwareEventText | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.25 | ScalarsaHpiOemEventLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.26 | ScalarsaHpiOemEventActiveEntries | read-only | current | This scalar object represents the subset of events that are oem Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.27 | TablesaHpiOemEventTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.27.1 | RowsaHpiOemEventEntry | not-accessible | current | Oem events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.27.1.1 | ColumnsaHpiOemEventEntryId | not-accessible | current | Arbitrary table index. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.27.1.2 | ColumnsaHpiOemEventTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.27.1.3 | ColumnsaHpiOemEventManufacturerIdT | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.27.1.4 | ColumnsaHpiOemEventTextType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.27.1.5 | ColumnsaHpiOemEventTextLanguage | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.27.1.6 | ColumnsaHpiOemEventText | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.28 | ScalarsaHpiUserEventLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.29 | ScalarsaHpiUserEventActiveEntries | read-only | current | This scalar object represents the subset of events that are User Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.30 | TablesaHpiUserEventTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.30.1 | RowsaHpiUserEventEntry | not-accessible | current | User events. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.30.1.1 | ColumnsaHpiUserEventEntryId | not-accessible | current | Arbitrary table index. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.30.1.2 | ColumnsaHpiUserEventTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.30.1.3 | ColumnsaHpiUserEventTextType | read-create | current | Refer to SaHpiTextType for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.30.1.4 | ColumnsaHpiUserEventTextLanguage | read-create | current | Refer to saHpiTextLanguage for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.30.1.5 | ColumnsaHpiUserEventText | read-create | current | Refer to saHpiText for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.30.1.6 | ColumnsaHpiUserEventRowStatus | read-create | current | This columnar object contains the status of the row and also perform add and delete operations. The status column uses three defined values: - `active(1)', whi… |
| 1.3.6.1.4.1.18568.2.1.1.3.1.31 | ScalarsaHpiAnnouncementActiveEntries | read-only | current | The number of announcements present on this system. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32 | TablesaHpiAnnouncementTable | not-accessible | current | Table of Announcements. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1 | RowsaHpiAnnouncementEntry | not-accessible | current | The table of announcements is used to provide a common interface to varied mechanisms for announcing conditions. Each announcement in an Annunciator's current … |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.1 | ColumnsaHpiAnnouncementEntryId | not-accessible | current | Entry ID for record Table Related Type Definitions SAHPI_FIRST_ENTRY 0x00000000 SAHPI_LAST_ENTRY 0xFFFFFFFF |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.2 | ColumnsaHpiAnnouncementAnnunciatorNum | read-create | current | Annunciator number for the addressed Annunciator. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.3 | ColumnsaHpiAnnouncementTimestamp | read-only | current | Time when announcement added to set. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.4 | ColumnsaHpiAnnouncementAddedByUser | read-only | current | True if added to set by HPI SNMP Manager, False if added automatically by HPI implementation. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.5 | ColumnsaHpiAnnouncementSeverity | read-create | current | Only used with DAT and Annunciator functions. This is not a valid severity for events or alarms. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.6 | ColumnsaHpiAnnouncementAcknowledged | read-create | current | Acknowledged flag.Use this columnar object to acknowledge a specific Announcement. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.7 | ColumnsaHpiAnnouncementAckBySeverity | read-create | current | Use this columnar object to acknowledge all Announcements of a particular severity. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.8 | ColumnsaHpiAnnouncementStatusCondType | read-create | current | Status Condition Type. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.9 | ColumnsaHpiAnnouncementEntityPath | read-create | current | See Textual-Convention for details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.10 | ColumnsaHpiAnnouncementSensorNum | read-create | current | Sensor associated with status Only valid if Type is SAHPI_STATUS_COND_TYPE_SENSOR. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.11 | ColumnsaHpiAnnouncementEventState | read-create | current | Sensor event state. Only valid if Type is SAHPI_STATUS_COND_TYPE_SENSOR.. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.12 | ColumnsaHpiAnnouncementName | read-create | current | AIS compatible identifier associated with Status condition. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.13 | ColumnsaHpiAnnouncementMid | read-create | current | Manufacturer Id associated with status condition, required when type is SAHPI_STATUS_COND_TYPE_OEM. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.14 | ColumnsaHpiAnnouncementTextType | read-create | current | Field Data. See Definition for SaHpiTextType for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.15 | ColumnsaHpiAnnouncementTextLanguage | read-create | current | Field Data. See Definition for SaHpiTextLanguage for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.16 | ColumnsaHpiAnnouncementText | read-create | current | Field Data. The type of date is specified by saHpiResourceTagTextType and saHpiResourceTagLanguage. |
| 1.3.6.1.4.1.18568.2.1.1.3.1.32.1.17 | ColumnsaHpiAnnouncementDelete | read-create | current | This function allows the HPI SNMP Manager to delete a single announcement. Announcements may be deleted individually by specifying a specific index and setting… |
| 1.3.6.1.4.1.18568.2.1.1.3.2 | NodeeventLog | |||
| 1.3.6.1.4.1.18568.2.1.1.3.2.1 | TablesaHpiEventLogInfoTable | not-accessible | current | A table definining Event Log Information records. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1 | RowsaHpiEventLogInfoEntry | not-accessible | current | Each resource has a Event Log Information record, which contains per resource pertinent logging information. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.1 | ColumnsaHpiEventLogInfoEntries | read-only | current | The number of active entries contained in the log. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.2 | ColumnsaHpiEventLogInfoSize | read-only | current | The total number of entries the log is able to hold. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.3 | ColumnsaHpiEventLogInfoUserEventMaxSize | read-only | current | The UserEventMaxSize entry indicates the maximum size of the text buffer data field in an HPI SNMP Manager event that is supported by the Event Log implementat… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.4 | ColumnsaHpiEventLogInfoUpdateTimestamp | read-only | current | The UpdateTimestamp entry denotes the time of the last update to the Event Log. Refer to SaHpiTime for full description. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.5 | ColumnsaHpiEventLogInfoTime | read-create | current | The Time entry denotes the Event Log's idea of the current time; i.e the timestamp that would be placed on an entry if it was added now. Remarks: Entries place… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.6 | ColumnsaHpiEventLogInfoIsEnabled | read-only | current | The Enabled entry indicates whether the log is enabled. If the event log is 'disabled' no events generated within the HPI implementation will be added to the e… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.7 | ColumnsaHpiEventLogInfoOverflowFlag | read-only | current | The OverflowFlag entry indicates the log has overflowed. Events have been dropped or overwritten due to a table overflow. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.8 | ColumnsaHpiEventLogInfoOverflowResetable | read-only | current | Indicates if the the overflow falg can be cleared by calling saHpiEventLogInfoOverflowReset. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.9 | ColumnsaHpiEventLogInfoOverflowAction | read-only | current | The OverflowAction entry indicates the behavior of the event log when an overflow occurs. drop(1) New entries are dropped when log is full overwrite(2) Event L… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.10 | ColumnsaHpiEventLogInfoOverflowReset | read-create | current | This function resets the OverflowFlag in the Event Log info record of the specified Event Log. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.11 | ColumnsaHpiEventLogClear | read-create | current | This function erases the contents of the specified Event Log. TRUE clears the event log of the resource specified. FALSE has no effect. NOTE: The OverflowFlag … |
| 1.3.6.1.4.1.18568.2.1.1.3.2.1.1.12 | ColumnsaHpiEventLogState | read-create | current | When reading this value, true indicates that the Event Log is enabled; False indicates that it is disabled. When writing this value, true indicates that the Ev… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.2 | TablesaHpiEventLogTable | not-accessible | current | A table definining Event Log records. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.2.1 | RowsaHpiEventLogEntry | not-accessible | current | This section defines the types associated with the SEL. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.2.1.1 | ColumnsaHpiEventLogIndex | not-accessible | current | Entry ID for record Reserved values for event log entry IDs OLDEST_ENTRY 0x00000000 NEWEST_ENTRY 0xFFFFFFFF NO_MORE_ENTRIES 0xFFFFFFFE |
| 1.3.6.1.4.1.18568.2.1.1.3.2.2.1.2 | ColumnsaHpiEventLogType | read-only | current | The type of event. Note: The enumerated named have +1 added as opposed to the SA HPI spec for the same constants. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.2.1.3 | ColumnsaHpiEventLogAddedTimestamp | read-only | current | Refer to SaHpiTime for full description. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.2.1.4 | ColumnsaHpiEventLogRowPointer | read-only | current | Pointer to the event. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.3 | ScalarsaHpiResourceEventLogLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.4 | ScalarsaHpiResourceEventLogActiveEntries | read-only | current | This scalar object represents the subset of events that are Resource Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.5 | TablesaHpiResourceEventLogTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.5.1 | RowsaHpiResourceEventLogEntry | not-accessible | current | Resource events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.5.1.1 | ColumnsaHpiResourceEventLogEntryId | not-accessible | current | Table Index. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.5.1.2 | ColumnsaHpiResourceEventLogTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.5.1.3 | ColumnsaHpiResourceEventLogType | read-only | current | Resource events are sent to indicate the failure or subsequent restoration of a resource. Resource events can also be used to announce the addition of a non-FR… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.6 | ScalarsaHpiDomainEventLogLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.7 | ScalarsaHpiDomainEventLogActiveEntries | read-only | current | This scalar object represents the subset of events that are Domain events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.8 | TablesaHpiDomainEventLogTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.8.1 | RowsaHpiDomainEventLogEntry | not-accessible | current | Domain events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.8.1.1 | ColumnsaHpiDomainEventLogEntryId | read-only | current | This columnar object is an index for Domain Events in the table. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.8.1.2 | ColumnsaHpiDomainEventLogTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.8.1.3 | ColumnsaHpiDomainEventLogType | read-only | current | Domain events are used to announce the addition of domain references and the removal of domain references to the DRT. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.9 | ScalarsaHpiSensorEventLogLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.10 | ScalarsaHpiSensorEventLogActiveEntries | read-only | current | This scalar object represents the subset of events that are Sensor Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11 | TablesaHpiSensorEventLogTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1 | RowsaHpiSensorEventLogEntry | not-accessible | current | Sensor events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.1 | ColumnsaHpiSensorEventLogTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.2 | ColumnsaHpiSensorEventLogType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.3 | ColumnsaHpiSensorEventLogCategory | read-only | current | Event category: See TEXTUAL-CONVENTION, SaHpiEventCategory. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.4 | ColumnsaHpiSensorEventLogAssertion | read-only | current | Sensor Events and Sensor Event States: Each Event State may be asserted or deasserted. The set of Event States a sensor may support is defined by the sensor's … |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.5 | ColumnsaHpiSensorEventLogState | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.6 | ColumnsaHpiSensorEventLogOptionalData | read-only | current | See textual convention aHpiOptionalData. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.7 | ColumnsaHpiSensorEventLogTriggerReadingType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.8 | ColumnsaHpiSensorEventLogTriggerReading | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.9 | ColumnsaHpiSensorEventLogTriggerThresholdType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.10 | ColumnsaHpiSensorEventLogTriggerThreshold | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.11 | ColumnsaHpiSensorEventLogPreviousState | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.12 | ColumnsaHpiSensorEventLogCurrentState | read-only | current | Refer to SaHpiEventState textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.13 | ColumnsaHpiSensorEventLogOem | read-only | current | Reserved for Oem use. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.11.1.14 | ColumnsaHpiSensorEventLogSpecific | read-only | current | Event log specific data. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.12 | ScalarsaHpiSensorEnableChangeEventLogLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.13 | ScalarsaHpiSensorEnableChangeEventLogActiveEntries | read-only | current | This scalar object represents the subset of events that are Sensor Enable ChangeEvents. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.14 | TablesaHpiSensorEnableChangeEventLogTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.14.1 | RowsaHpiSensorEnableChangeEventLogEntry | not-accessible | current | Sensor Enable Change events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.14.1.1 | ColumnsaHpiSensorEnableChangeEventLogTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.14.1.2 | ColumnsaHpiSensorEnableChangeEventLogType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.14.1.3 | ColumnsaHpiSensorEnableChangeEventLogCategory | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.14.1.4 | ColumnsaHpiSensorEnableChangeEventLogEnabled | read-only | current | Current sensor enable status. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.14.1.5 | ColumnsaHpiSensorEnableChangeEventLogEventsEnabled | read-only | current | Current event enable status. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.14.1.6 | ColumnsaHpiSensorEnableChangeEventLogAssertEvents | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.14.1.7 | ColumnsaHpiSensorEnableChangeEventLogDeassertEvents | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.14.1.8 | ColumnsaHpiSensorEnableChangeEventLogOptionalData | read-only | current | See textual convention SaHpiOptionalData. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.14.1.9 | ColumnsaHpiSensorEnableChangeEventLogState | read-only | current | Current set of asserted Event states. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.15 | ScalarsaHpiHotSwapEventLogLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.16 | ScalarsaHpiHotSwapEventLogActiveEntries | read-only | current | This scalar object represents the subset of events that are HotSwap Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.17 | TablesaHpiHotSwapEventLogTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.17.1 | RowsaHpiHotSwapEventLogEntry | not-accessible | current | Hot Swap events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.17.1.1 | ColumnsaHpiHotSwapEventLogTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.17.1.2 | ColumnsaHpiHotSwapEventLogState | read-only | current | Refer to the textual convention for full details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.17.1.3 | ColumnsaHpiHotSwapEventLogPreviousState | read-only | current | Refer to the textual convention for full details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.18 | ScalarsaHpiWatchdogEventLogLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.19 | ScalarsaHpiWatchdogEventLogActiveEntries | read-only | current | This scalar object represents the subset of events that are Watchdog Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.20 | TablesaHpiWatchdogEventLogTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.20.1 | RowsaHpiWatchdogEventLogEntry | not-accessible | current | Watchdog events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.20.1.1 | ColumnsaHpiWatchdogEventLogTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.20.1.2 | ColumnsaHpiWatchdogEventLogAction | read-only | current | These enumerations represent the possible actions to be taken upon watchdog timer timeout and the events that are generated for watchdog actions. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.20.1.3 | ColumnsaHpiWatchdogEventLogPreTimerAction | read-only | current | These enumerations represent the possible types of interrupts that may be triggered by a watchdog pre-timer event. The actual meaning of these operations may d… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.20.1.4 | ColumnsaHpiWatchdogEventLogUse | read-only | current | Watchdog Timer Use These enumerations represent the possible watchdog users that may have caused the watchdog to expire. For instance, if watchdog is being use… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.21 | ScalarsaHpiSoftwareEventLogLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.22 | ScalarsaHpiSoftwareEventLogActiveEntries | read-only | current | This scalar object represents the subset of events that are Software Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.23 | TablesaHpiSoftwareEventLogTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.23.1 | RowsaHpiSoftwareEventLogEntry | not-accessible | current | Software events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.23.1.1 | ColumnsaHpiSoftwareEventLogTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.23.1.2 | ColumnsaHpiSoftwareEventLogManufacturerIdT | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.23.1.3 | ColumnsaHpiSoftwareEventLogType | read-only | current | The following type defines the types of events that can be reported by the HPI software implementation. Audit events report a discrepancy in the audit process.… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.23.1.4 | ColumnsaHpiSoftwareEventLogTextType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.23.1.5 | ColumnsaHpiSoftwareEventLogTextLanguage | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.23.1.6 | ColumnsaHpiSoftwareEventLogText | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.24 | ScalarsaHpiOemEventLogLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.25 | ScalarsaHpiOemEventLogActiveEntries | read-only | current | This scalar object represents the subset of events that are Oem Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.26 | TablesaHpiOemEventLogTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.26.1 | RowsaHpiOemEventLogEntry | not-accessible | current | Oem events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.26.1.1 | ColumnsaHpiOemEventLogTimestamp | read-only | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.26.1.2 | ColumnsaHpiOemEventLogManufacturerIdT | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.26.1.3 | ColumnsaHpiOemEventLogTextType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.26.1.4 | ColumnsaHpiOemEventLogTextLanguage | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.26.1.5 | ColumnsaHpiOemEventLogText | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.27 | ScalarsaHpiUserEventLogLifetimeChanges | read-only | current | Use this value to determine table activity. It is incremented each time an event is registered in this table. It is also incremented whenever an event is remov… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.28 | ScalarsaHpiUserEventLogActiveEntries | read-only | current | This scalar object represents the subset of events that are User Events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.29 | TablesaHpiUserEventLogTable | not-accessible | current | Event table. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.29.1 | RowsaHpiUserEventLogEntry | not-accessible | current | User events. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.29.1.1 | ColumnsaHpiUserEventLogTimestamp | read-create | current | Refer to textual convention for SaHpiTime for more details. The value is Equal to TIME_UNSPECIFIED if time is not available; Absolute time if greater than TIME… |
| 1.3.6.1.4.1.18568.2.1.1.3.2.29.1.2 | ColumnsaHpiUserEventLogTextType | read-create | current | Refer to SaHpiTextType for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.29.1.3 | ColumnsaHpiUserEventLogTextLanguage | read-create | current | Refer to saHpiTextLanguage for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.29.1.4 | ColumnsaHpiUserEventLogText | read-create | current | Refer to saHpiText for more details. |
| 1.3.6.1.4.1.18568.2.1.1.3.2.29.1.5 | ColumnsaHpiUserEventLogRowStatus | read-create | current | This columnar object contains the status of the row and also perform add and delete operations. The status column uses four defined values: - `active(1)', whic… |
| 1.3.6.1.4.1.18568.2.1.1.4 | NodehpiResources | |||
| 1.3.6.1.4.1.18568.2.1.1.4.1 | ScalarsaHpiRdrActiveEntries | read-only | current | Number of resource data records in this system. |
| 1.3.6.1.4.1.18568.2.1.1.4.2 | TablesaHpiRdrTable | not-accessible | current | A table definining Resource Data Records (RDR) records. |
| 1.3.6.1.4.1.18568.2.1.1.4.2.1 | RowsaHpiRdrEntry | not-accessible | current | The following describes the different types of records that exist within a Resource Data Repository and the RDR super-structure to all of the specific RDR type… |
| 1.3.6.1.4.1.18568.2.1.1.4.2.1.1 | ColumnsaHpiRdrEntryId | not-accessible | current | Id of the Resource Data Repository (RDR) entry. |
| 1.3.6.1.4.1.18568.2.1.1.4.2.1.2 | ColumnsaHpiRdrNextEntryId | read-only | current | ID of the next Resource Data Repository (RDR) entry. Use this to aid in walking just the RDRs for a given ResourceId. For example If you know the DomainId and … |
| 1.3.6.1.4.1.18568.2.1.1.4.2.1.3 | ColumnsaHpiRdrType | read-only | current | Type of Resource Data Repository entry. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| 1.3.6.1.4.1.18568.2.1.1.4.2.1.4 | ColumnsaHpiRdrEntityPath | read-only | current | See Textual-Convention for details. |
| 1.3.6.1.4.1.18568.2.1.1.4.2.1.5 | ColumnsaHpiRdrIsFru | read-only | current | Entity is a FRU. This field is Only valid if the Entity path given in the 'Entity' field is different from the Entity path in the RPT entry for the resource. |
| 1.3.6.1.4.1.18568.2.1.1.4.2.1.6 | ColumnsaHpiRdrRowPointer | read-only | current | Forward pointer to one of the four types of tables: saHpiCtrlRec saHpiSensorRec saHpiInventoryRec saHpiWatchdogRec |
| 1.3.6.1.4.1.18568.2.1.1.4.2.1.7 | ColumnsaHpiRdrRPT | read-only | current | Forward pointer to the Resource Presence Table (RPT) entry. |
| 1.3.6.1.4.1.18568.2.1.1.4.2.1.8 | ColumnsaHpiRdrTextType | read-only | current | The resource text definition. See textual definition for more information. |
| 1.3.6.1.4.1.18568.2.1.1.4.2.1.9 | ColumnsaHpiRdrTextLanguage | read-only | current | The resource text language type. See textual definition for more information. |
| 1.3.6.1.4.1.18568.2.1.1.4.2.1.10 | ColumnsaHpiRdrIdString | read-only | current | ID String of the Resource Data Repository entry. |
| 1.3.6.1.4.1.18568.2.1.1.4.3 | ScalarsaHpiWatchdogActiveEntries | read-only | current | The number of watchdogs present on this system. |
| 1.3.6.1.4.1.18568.2.1.1.4.4 | TablesaHpiWatchdogTable | not-accessible | current | Table of static and dynamic watchdog information including watchdog RDR data. The dynamic data portion is necessary for control and operation of the watchdog t… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1 | RowsaHpiWatchdogEntry | not-accessible | current | When the 'Watchdog' capability is set in a resource, a watchdog with an identifier of SAHPI_DEFAULT_WATCHDOG_NUM(0), that is defined as 0, is required. All wat… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.1 | ColumnsaHpiWatchdogNum | not-accessible | current | RPT entry for a resource indicates that it supports watchdog timers, then there must be at least one watchdog timer hosted by the resource, with the watchdog n… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.2 | ColumnsaHpiWatchdogLog | read-write | current | If you read this object, it means: Log - indicates whether or not the Watchdog is configured to issue an event when it next times out. TRUE=event will be issue… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.3 | ColumnsaHpiWatchdogRunning | read-write | current | If you read this object, it means: Running - indicates whether or not the Watchdog is currently running or stopped. TRUE=Watchdog is running. If you set this o… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.4 | ColumnsaHpiWatchdogTimerUseState | read-write | current | If you read this object, it means: TimerUse - indicates the current use of the timer; one of five preset uses which was included on the last SET object request… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.5 | ColumnsaHpiWatchdogTimerAction | read-write | current | Indicates what action will be taken when the Watchdog times out. Setting this object will NOT take effect on the Watchdog until the object SaHpiWatchdogRunning… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.6 | ColumnsaHpiWatchdogPretimerInterrupt | read-write | current | PretimerInterrupt - indicates which action will be taken 'PreTimeoutInterval' seconds prior to Watchdog timer expiration. Setting this object will NOT take eff… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.7 | ColumnsaHpiWatchdogPreTimeoutInterval | read-write | current | PreTimeoutInterval indicates how many milliseconds prior to timer time out the PretimerInterrupt action will be taken. If 'PreTimeoutInterval' = 0, the Pretime… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.8 | ColumnsaHpiWatchdogTimerUseExpFlags | read-write | current | Set of values seperated by a delimiter. For each value set, the corresponding Timer Use Expiration Flag will be CLEARED. Generally, a program should only clear… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.9 | ColumnsaHpiWatchdogTimerInitialCount | read-write | current | InitialCount - The time, in milliseconds, before the timer will time out after a SaHpiWatchdogTimerReset() function call is made, or some other implementation-… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.10 | ColumnsaHpiWatchdogTimerPresentCount | read-write | current | PresentCount - The remaining time in milliseconds before the timer will time out unless a SaHpiWatchdogTimerReset() function call is made, or some other implem… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.11 | ColumnsaHpiWatchdogTimerReset | read-write | current | This object provides a method to start or restart the watchdog timer from the initial countdown value. Setting this to true(1) will 'strobe' the counter and re… |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.12 | ColumnsaHpiWatchdogOem | read-only | current | Reserved for Oem use |
| 1.3.6.1.4.1.18568.2.1.1.4.4.1.13 | ColumnsaHpiWatchdogRDR | read-only | current | Forward pointer to the Resource Data Repository OID. |
| 1.3.6.1.4.1.18568.2.1.1.4.5 | ScalarsaHpiAnnunciatorActiveEntries | read-only | current | The number of annunciators present on this system. |
| 1.3.6.1.4.1.18568.2.1.1.4.6 | TablesaHpiAnnunciatorTable | not-accessible | current | Table of static Annunciator resource data record information and dynamic control data. The columnar object 'saHpiAnnunciatorMode' is in support of SAI-HPI-B.01… |
| 1.3.6.1.4.1.18568.2.1.1.4.6.1 | RowsaHpiAnnunciatorEntry | not-accessible | current | The Annunciator table is used to control the set of annunciators associated with a resource. An Annunciator management instrument holds a set of individual ann… |
| 1.3.6.1.4.1.18568.2.1.1.4.6.1.1 | ColumnsaHpiAnnunciatorNum | not-accessible | current | Unique Number identifying each annunciator. |
| 1.3.6.1.4.1.18568.2.1.1.4.6.1.2 | ColumnsaHpiAnnunciatorType | read-only | current | The following enumerated type defines the possible output types which can be associated with an Annunciator Management Instrument. Note: Enumerated values are … |
| 1.3.6.1.4.1.18568.2.1.1.4.6.1.3 | ColumnsaHpiAnnunciatorModeReadOnly | read-only | current | if True, Mode may not be changed by HPI SNMP Manager. |
| 1.3.6.1.4.1.18568.2.1.1.4.6.1.4 | ColumnsaHpiAnnunciatorMaxConditions | read-only | current | Maximum number of conditions that can be held in current set. 0 means no fixed limit. |
| 1.3.6.1.4.1.18568.2.1.1.4.6.1.5 | ColumnsaHpiAnnunciatorMode | read-write | current | The Annunciator management instrument has a current mode that indicates whether announcements are added and removed automatically by the HPI implementation, by… |
| 1.3.6.1.4.1.18568.2.1.1.4.6.1.6 | ColumnsaHpiAnnunciatorOem | read-only | current | Maximum number of conditions that can be held in current set. 0 means no fixed limit. if True, Mode may not be changed by HPI SNMP Manager. |
| 1.3.6.1.4.1.18568.2.1.1.4.6.1.7 | ColumnsaHpiAnnunciatorRDR | read-only | current | Forward pointer to the Resource Data Repository OID. |
| 1.3.6.1.4.1.18568.2.1.1.4.7 | NodehpiControl | |||
| 1.3.6.1.4.1.18568.2.1.1.4.7.1 | ScalarsaHpiCtrlDigitalActiveEntries | read-only | current | The number of digital controls in the system. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2 | TablesaHpiCtrlDigitalTable | not-accessible | current | A table of digital controls and its states. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1 | RowsaHpiCtrlDigitalEntry | not-accessible | current | Definition of the digital control table. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1.1 | ColumnsaHpiCtrlDigitalEntryId | not-accessible | current | This index element is here to help facilitate browsing of digital controls based on resource id. For example to find the first digital control from the domain … |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1.2 | ColumnsaHpiCtrlDigitalNum | read-only | current | The control number |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1.3 | ColumnsaHpiCtrlDigitalOutputType | read-only | current | Refer to the textual convention for more details on the enumerations. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1.4 | ColumnsaHpiCtrlDigitalDefaultMode | read-only | current | This object describes the default method the control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be manag… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1.5 | ColumnsaHpiCtrlDigitalMode | read-write | current | This object describes how the control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be managed by the HPI S… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1.6 | ColumnsaHpiCtrlDigitalIsReadOnly | read-only | current | Indicates if mode is read-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1.7 | ColumnsaHpiCtrlDigitalIsWriteOnly | read-only | current | Indicates if Control is write-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1.8 | ColumnsaHpiCtrlDigitalDefaultState | read-only | current | This object represents the default digital control state. Refer to the textual convention for more details on the enumerations. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1.9 | ColumnsaHpiCtrlDigitalState | read-write | current | This object represents the current digital state of the control. Write to this object to change the digital state. You may not change the state of the control … |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1.10 | ColumnsaHpiCtrlDigitalOem | read-only | current | Reserved for Oem use |
| 1.3.6.1.4.1.18568.2.1.1.4.7.2.1.11 | ColumnsaHpiCtrlDigitalRDR | read-only | current | Pointer to Resource Table for this digital control. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.3 | ScalarsaHpiCtrlDiscreteActiveEntries | read-only | current | The number of discrete controls in the system. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4 | TablesaHpiCtrlDiscreteTable | not-accessible | current | A table of discrete controls and its states. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1 | RowsaHpiCtrlDiscreteEntry | not-accessible | current | Definition of the discrete control table. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1.1 | ColumnsaHpiCtrlDiscreteEntryId | not-accessible | current | This index element is here to help facilitate browsing of digital controls based on resource id. For example to find the first digital control from the domain … |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1.2 | ColumnsaHpiCtrlDiscreteNum | read-only | current | The control number |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1.3 | ColumnsaHpiCtrlDiscreteOutputType | read-only | current | Refer to the textual convention for more details on the enumerations. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1.4 | ColumnsaHpiCtrlDiscreteDefaultMode | read-only | current | This object describes the default method the control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be manag… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1.5 | ColumnsaHpiCtrlDiscreteMode | read-write | current | This object describes how the control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be managed by the HPI S… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1.6 | ColumnsaHpiCtrlDiscreteIsReadOnly | read-only | current | Indicates if mode is read-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1.7 | ColumnsaHpiCtrlDiscreteIsWriteOnly | read-only | current | Indicates if Control is write-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1.8 | ColumnsaHpiCtrlDiscreteDefaultState | read-only | current | This object represents the default value of the discrete control resource. Refer to the textual convention for more details on the enumerations. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1.9 | ColumnsaHpiCtrlDiscreteState | read-write | current | This object represents the current discrete state of the control. Write to this object to change the values of the state. You may not change the state of the c… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1.10 | ColumnsaHpiCtrlDiscreteOem | read-only | current | Reserved for Oem use |
| 1.3.6.1.4.1.18568.2.1.1.4.7.4.1.11 | ColumnsaHpiCtrlDiscreteRDR | read-only | current | Pointer to Resource Table for this discrete control entry. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.6 | ScalarsaHpiCtrlAnalogActiveEntries | read-only | current | The number of analog controls in the system. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7 | TablesaHpiCtrlAnalogTable | not-accessible | current | A table of analog controls and its states. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1 | RowsaHpiCtrlAnalogEntry | not-accessible | current | Definition of the analog control table. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.1 | ColumnsaHpiCtrlAnalogEntryId | not-accessible | current | This index element is here to help facilitate browsing of digital controls based on resource id. For example to find the first digital control from the domain … |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.2 | ColumnsaHpiCtrlAnalogNum | read-only | current | The control number |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.3 | ColumnsaHpiCtrlAnalogOutputType | read-only | current | Refer to the textual convention for more details on the enumerations. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.4 | ColumnsaHpiCtrlAnalogDefaultMode | read-only | current | This object describes the default method control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be managed b… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.5 | ColumnsaHpiCtrlAnalogMode | read-write | current | This object describes how the control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be managed by the HPI S… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.6 | ColumnsaHpiCtrlAnalogIsReadOnly | read-only | current | Indicates if mode is read-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.7 | ColumnsaHpiCtrlAnalogIsWriteOnly | read-only | current | Indicates if Control is write-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.8 | ColumnsaHpiCtrlAnalogDefaultMinState | read-only | current | This object represents the default minimum value of this analog control. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.9 | ColumnsaHpiCtrlAnalogDefaultMaxState | read-only | current | This object represents the default maximum value of this analog control. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.10 | ColumnsaHpiCtrlAnalogDefaultState | read-only | current | This object represents the default value of this analog control. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.11 | ColumnsaHpiCtrlAnalogState | read-write | current | This object represents the current state of the analog control. Write to this object to change the state. You may not change the state of the control unless th… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.12 | ColumnsaHpiCtrlAnalogOem | read-only | current | Reserved for Oem use |
| 1.3.6.1.4.1.18568.2.1.1.4.7.7.1.13 | ColumnsaHpiCtrlAnalogRDR | read-only | current | Pointer to Resource Table for this analog control. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.8 | ScalarsaHpiCtrlStreamActiveEntries | read-only | current | The number of stream controls in the system. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9 | TablesaHpiCtrlStreamTable | not-accessible | current | A table of stream controls and its states. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1 | RowsaHpiCtrlStreamEntry | not-accessible | current | Definition of the stream control table. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.1 | ColumnsaHpiCtrlStreamEntryId | not-accessible | current | This index element is here to help facilitate browsing of digital controls based on resource id. For example to find the first digital control from the domain … |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.2 | ColumnsaHpiCtrlStreamNum | read-only | current | The control number |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.3 | ColumnsaHpiCtrlStreamOutputType | read-only | current | Refer to the textual convention for more details on the enumerations. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.4 | ColumnsaHpiCtrlStreamDefaultMode | read-only | current | This object describes the default method the control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be manag… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.5 | ColumnsaHpiCtrlStreamMode | read-write | current | This object describes how the control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be managed by the HPI S… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.6 | ColumnsaHpiCtrlStreamIsReadOnly | read-only | current | Indicates if mode is read-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.7 | ColumnsaHpiCtrlStreamIsWriteOnly | read-only | current | Indicates if Control is write-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.8 | ColumnsaHpiCtrlStreamDefaultRepeat | read-only | current | This object represents the default repeat flag of stream control. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.9 | ColumnsaHpiCtrlStreamDefaultState | read-only | current | This object represents the default value of the stream control. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.10 | ColumnsaHpiCtrlStreamRepeat | read-write | current | This object represents the current repeat flag of the stream control. Write to this object to change the repeat value of the stream data. You may not change th… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.11 | ColumnsaHpiCtrlStreamState | read-write | current | This object represents the current state of the stream control. Write to this object to change the state of the stream control. You may not change the state of… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.12 | ColumnsaHpiCtrlStreamOem | read-only | current | Reserved for Oem use |
| 1.3.6.1.4.1.18568.2.1.1.4.7.9.1.13 | ColumnsaHpiCtrlStreamRDR | read-only | current | Pointer to Resource Table for this stream control. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.10 | ScalarsaHpiCtrlTextActiveEntries | read-only | current | The number of text controls in the system. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11 | TablesaHpiCtrlTextTable | not-accessible | current | A table of text controls and its states. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1 | RowsaHpiCtrlTextEntry | not-accessible | current | Definition of the text control table. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.1 | ColumnsaHpiCtrlTextEntryId | not-accessible | current | This index element is here to help facilitate browsing of digital controls based on resource id. For example to find the first digital control from the domain … |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.2 | ColumnsaHpiCtrlTextNum | read-only | current | The control number |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.3 | ColumnsaHpiCtrlTextOutputType | read-only | current | Refer to the textual convention for more details on the enumerations. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.4 | ColumnsaHpiCtrlTextDefaultMode | read-only | current | This object describes the default method the control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be manag… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.5 | ColumnsaHpiCtrlTextMode | read-write | current | This object describes how the control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be managed by the HPI U… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.6 | ColumnsaHpiCtrlTextIsReadOnly | read-only | current | Indicates if mode is read-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.7 | ColumnsaHpiCtrlTextIsWriteOnly | read-only | current | Indicates if Control is write-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.8 | ColumnsaHpiCtrlTextMaxChars | read-only | current | This object represents the maximum characters per line for this text control. Note: If the saHpiCtrlTextType is unicode(1), there will be two bytes required fo… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.9 | ColumnsaHpiCtrlTextMaxLines | read-only | current | This object represents the maximum number of lines of the text control. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.10 | ColumnsaHpiCtrlTextLanguage | read-only | current | This object represents the default text language setting of the control text. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.11 | ColumnsaHpiCtrlTextType | read-only | current | This represents the current text setting of the control. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.12 | ColumnsaHpiCtrlTextDefaultLine | read-only | current | This object represents the default line number of text represented in saHpiCtrlTextDefault object. If the line is 255, then saHpiCtrlTextDefault columnar objec… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.13 | ColumnsaHpiCtrlTextDefault | read-only | current | The default text of a control text resource. Refer to saHpiCtrlTextDefaultLine for the line number, saHpiCtrlTextLanguage for the language setting and saHpiCtr… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.14 | ColumnsaHpiCtrlTextLine | read-write | current | The current line number of text. Refer to saHpiCtrlTextState for usage examples. If the line number passed in is 255, then saHpiCtrlTextState columnar object w… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.15 | ColumnsaHpiCtrlTextState | read-write | current | This columnar object can be used to write to the text controls. To do so, first set the line number in saHpiCtrlTextLine and then write to this object. The fir… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.16 | ColumnsaHpiCtrlTextOem | read-only | current | Reserved for Oem use |
| 1.3.6.1.4.1.18568.2.1.1.4.7.11.1.17 | ColumnsaHpiCtrlTextRDR | read-only | current | Pointer to Resource Table for this text control. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.12 | ScalarsaHpiCtrlOemActiveEntries | read-only | current | The number of Oem controls in the system. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13 | TablesaHpiCtrlOemTable | not-accessible | current | A table of Oem controls and its states. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1 | RowsaHpiCtrlOemEntry | not-accessible | current | Definition of the Oem control table. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.1 | ColumnsaHpiCtrlOemEntryId | not-accessible | current | This index element is here to help facilitate browsing of digital controls based on resource id. For example to find the first digital control from the domain … |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.2 | ColumnsaHpiCtrlOemNum | read-only | current | The control number |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.3 | ColumnsaHpiCtrlOemOutputType | read-only | current | Refer to the textual convention for more details on the enumerations. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.4 | ColumnsaHpiCtrlOemDefaultMode | read-only | current | This object describes the default method the control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be manag… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.5 | ColumnsaHpiCtrlOemMode | read-write | current | This object describes how the control is managed. The control may be managed automatically by the implementation (auto mode). Or it may be managed by the HPI U… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.6 | ColumnsaHpiCtrlOemIsReadOnly | read-only | current | Indicates if mode is read-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.7 | ColumnsaHpiCtrlOemIsWriteOnly | read-only | current | Indicates if Control is write-only |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.8 | ColumnsaHpiCtrlOemManufacturerId | read-only | current | This object represents the Oem's manufacturer ID for this Oem control. Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.9 | ColumnsaHpiCtrlOemDefaultConfigData | read-only | current | This object represents the Oem control configuration data. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.10 | ColumnsaHpiCtrlOemDefaultMId | read-only | current | This object represents the Oem's manufacturer ID for this Oem control resource. Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.11 | ColumnsaHpiCtrlOemDefaultState | read-only | current | This represents the Oem control state setting. |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.12 | ColumnsaHpiCtrlOemState | read-write | current | This object allows to write to the Oem control state setting. You may not change the state of the control unless the Mode is set to manual(2). If a write is at… |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.13 | ColumnsaHpiCtrlOemValue | read-only | current | Reserved for Oem use |
| 1.3.6.1.4.1.18568.2.1.1.4.7.13.1.14 | ColumnsaHpiCtrlOemRDR | read-only | current | Pointer to Resource Table for this Oem control. |
| 1.3.6.1.4.1.18568.2.1.1.4.8 | NodehpiInventory | |||
| 1.3.6.1.4.1.18568.2.1.1.4.8.1 | ScalarsaHpiInventoryActiveEntries | read-only | current | The number of inventory resource data records managed by the underlying management system. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.2 | TablesaHpiInventoryTable | not-accessible | current | Table defining static data associated with Inventory Repository Data Repository. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.2.1 | RowsaHpiInventoryEntry | not-accessible | current | These structures are used to read and write inventory data to Inventory entity Data Repository (IDR). Each table row represents an IDR. All inventory data cont… |
| 1.3.6.1.4.1.18568.2.1.1.4.8.2.1.1 | ColumnsaHpiInventoryId | not-accessible | current | See TEXTUAL-CONVENTION 'SaHpiInstrumentId' |
| 1.3.6.1.4.1.18568.2.1.1.4.8.2.1.2 | ColumnsaHpiInventoryPersistent | read-only | current | True indicates that updates to IDR are automatically and immediately persistent. False indicates that updates are not immediately persistent; but optionally ma… |
| 1.3.6.1.4.1.18568.2.1.1.4.8.2.1.3 | ColumnsaHpiInventoryOem | read-only | current | Oem value for the inventory record. This is manufacturer' specific value. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.2.1.4 | ColumnsaHpiInventoryUpdateCount | read-only | current | The count is incremented any time the IDR is changed. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.2.1.5 | ColumnsaHpiInventoryIsReadOnly | read-only | current | Describes if the IDR is read-only. If 'IsReadOnly is 'TRUE' then all 'areas' and 'fields' associated with Inventory Data Repository are also flagged as 'Read O… |
| 1.3.6.1.4.1.18568.2.1.1.4.8.2.1.6 | ColumnsaHpiInventoryNumAreas | read-only | current | Number of Area(s) contained in IDR |
| 1.3.6.1.4.1.18568.2.1.1.4.8.2.1.7 | ColumnsaHpiInventoryRDR | read-only | current | Pointer to resource data record for this particular inventory resource data record |
| 1.3.6.1.4.1.18568.2.1.1.4.8.3 | ScalarsaHpiAreaActiveEntries | read-only | current | The number of inventory data records present on this system. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.4 | TablesaHpiAreaTable | not-accessible | current | Table defining inventory data respository data area records. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.4.1 | RowsaHpiAreaEntry | not-accessible | current | These structures are used to read and write inventory data respository data area records. The four-tuple index value consits of: - saHpiDomainId, which is the … |
| 1.3.6.1.4.1.18568.2.1.1.4.8.4.1.1 | ColumnsaHpiAreaId | not-accessible | current | This is the HPI management user specified AreaId value. It is this value that is used in row 'createAndWait' function, which is synonomous with adding a new ID… |
| 1.3.6.1.4.1.18568.2.1.1.4.8.4.1.2 | ColumnsaHpiAreaIdIndex | read-only | current | This columnar object is the value generated and utilized by the underlying system management implementation. This is the SAI-HPI-b.01.01 AreaId. See TEXTUAL-CO… |
| 1.3.6.1.4.1.18568.2.1.1.4.8.4.1.3 | ColumnsaHpiAreaType | read-create | current | The type of Area. New Area's are Created when 'saHpiIdrAreaType' is written with the appropriate index values's. Note: Enumerated values are increased by one v… |
| 1.3.6.1.4.1.18568.2.1.1.4.8.4.1.4 | ColumnsaHpiAreaIsReadOnly | read-only | current | This columnar object is informational only. Describes if an area is read-only. If it is set to 'FASLE' then a user can 'delete' this 'area' and add new 'fields… |
| 1.3.6.1.4.1.18568.2.1.1.4.8.4.1.5 | ColumnsaHpiAreaRowStatus | read-create | current | This columnar object contains the status of the row and also perform add and delete operations. The status column uses three defined values: - `active(1)', whi… |
| 1.3.6.1.4.1.18568.2.1.1.4.8.4.1.6 | ColumnsaHpiAreaNumDataFields | read-only | current | Number of Fields contained in Area |
| 1.3.6.1.4.1.18568.2.1.1.4.8.5 | ScalarsaHpiFieldActiveEntries | read-only | current | The number of inventory data repository field records. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.6 | TablesaHpiFieldTable | not-accessible | current | Table defining inventory data repository field records. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.6.1 | RowsaHpiFieldEntry | not-accessible | current | These structures are used to read and write inventory data repository field records. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.6.1.1 | ColumnsaHpiFieldId | not-accessible | current | See TEXTUAL-CONVENTION 'SaHpiInstrumentId'. SubAgent created and maintained Index value. Do not confuse this with saHpiFieldIdIndex that is created and maintai… |
| 1.3.6.1.4.1.18568.2.1.1.4.8.6.1.2 | ColumnsaHpiFieldIdIndex | read-only | current | See TEXTUAL-CONVENTION 'SaHpiInstrumentId', Used to store the HPI generated AreaId, very important. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.6.1.3 | ColumnsaHpiFieldType | read-create | current | Inventory Data Field type definitions. Note: Enumerated values are increased by one value compared to SAI-HPI-B spec. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.6.1.4 | ColumnsaHpiFieldIsReadOnly | read-only | current | Describes if an field is read-only. All field headers in a read-only IDR are flagged as read-only as well. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.6.1.5 | ColumnsaHpiFieldTextType | read-create | current | Field Data. See Definition for SaHpiTextType for more details. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.6.1.6 | ColumnsaHpiFieldTextLanguage | read-create | current | Field Data. See Definition for SaHpiTextLanguage for more details. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.6.1.7 | ColumnsaHpiFieldText | read-create | current | Field Data. The type of date is specified by saHpiResourceTagTextType and saHpiResourceTagLanguage. |
| 1.3.6.1.4.1.18568.2.1.1.4.8.6.1.8 | ColumnsaHpiFieldStatus | read-create | current | This object provides a method to create and delete a Data Inventory Field. Supported states are: active(1), notInService(2), createAndWait(5), destroy(6) The s… |
| 1.3.6.1.4.1.18568.2.1.1.4.9 | NodehpiSensor | |||
| 1.3.6.1.4.1.18568.2.1.1.4.9.1 | ScalarsaHpiSensorActiveEntries | read-only | current | The number of sensor resource data records in the system. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2 | TablesaHpiSensorTable | not-accessible | current | A table defining the static Sensor data found in the Sensor Resource Data Repository. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1 | RowsaHpiSensorEntry | not-accessible | current | This is the sensor resource data record which describes all of the static data associated with a sensor. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.1 | ColumnsaHpiSensorNum | not-accessible | current | The sensor number. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.2 | ColumnsaHpiSensorType | read-only | current | Refer to the textual convention for more details. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.3 | ColumnsaHpiSensorCategory | read-only | current | Sensors category. Sensor events contain an event category and event state. Depending on the event category, the event states take on different meanings for eve… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.4 | ColumnsaHpiSensorEnableCtrl | read-only | current | True if HPI SNMP Manager can enable or disable sensor via saHpiSensorEnableSet. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.5 | ColumnsaHpiSensorEventCtrl | read-only | current | This columnar object represents the sensor category control of events. The possible states are: perEvent - Event message control per event, or by entire sensor… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.6 | ColumnsaHpiSensorSupportedEventStates | read-only | current | Set of event states supported. For format and possible types, refer to SaHpiEventState. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.7 | ColumnsaHpiSensorIsSupported | read-only | current | Indicates if sensor data readings are supported. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.8 | ColumnsaHpiSensorReadingType | read-only | current | Type of value for sensor reading. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.9 | ColumnsaHpiSensorBaseUnits | read-only | current | This columnar object provides the sensor data base units, (meters, etc.) |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.10 | ColumnsaHpiSensorModifierUnits | read-only | current | This columnar object provides the sensor data modifier unit(s). Example unit = second, etc. Also see modifier use columnar object saHpiSensorModifierUse for fu… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.11 | ColumnsaHpiSensorModifierUse | read-only | current | Modifier Unit Use (m/sec, etc.). This type defines how the modifier unit is used. For example: base unit == meter, modifier unit == seconds, and modifier unit … |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.12 | ColumnsaHpiSensorPercentage | read-only | current | Is the value a percentage. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.13 | ColumnsaHpiSensorRangeFlags | read-only | current | Defines which range flags the sensor supports. The string tokens are MIN, MAX, NOMINAL, NORMAL_MAX, NORMAL_MIN, or nothing (NULL) if the sensor does not suppor… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.14 | ColumnsaHpiSensorAccuracyFactor | read-only | current | The Accuracy Factor is expressed as a floating point percentage (e.g. 0.05 = 5%) and represents statistically how close the measured reading is to the actual v… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.15 | ColumnsaHpiSensorOem | read-only | current | Reserved for Oem use. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.2.1.16 | ColumnsaHpiSensorRDR | read-only | current | Forward pointer to the Resource Data Repository OID. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3 | TablesaHpiCurrentSensorStateTable | not-accessible | current | A table definining current sensor readings and settings of a sensor. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3.1 | RowsaHpiCurrentSensorStateEntry | not-accessible | current | This is the sensor dynamic data associated with sensors readings and event states. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3.1.1 | ColumnsaHpiCurrentSensorStateDataPresent | read-only | current | reading(1) - This table contains only the sensor reading values. Refer to saHpiCurrentSensorStateType and saHpiCurrentSensorStateValue. SAI-HPI-b.01.01 IsSuppo… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3.1.2 | ColumnsaHpiCurrentSensorStateType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3.1.3 | ColumnsaHpiCurrentSensorStateValue | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3.1.4 | ColumnsaHpiCurrentSensorStateEventState | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3.1.5 | ColumnsaHpiCurrentSensorStateSensorEnable | read-write | current | When reading, this object returns the current sensor enable status for an addressed sensor. When writing this object sets the sensor enable status for an addre… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3.1.6 | ColumnsaHpiCurrentSensorStateEventEnable | read-write | current | When reading, this object returns the current sensor event enable status for an addressed sensor. When writing this object sets the sensor event enable status … |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3.1.7 | ColumnsaHpiCurrentSensorStateAssertAddEventMask | read-write | current | A string values separated by a delimiter (see SaHpiEventState for more details) is returned by this object. A string value, seperated by a delimiter in the saH… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3.1.8 | ColumnsaHpiCurrentSensorStateAssertRemoveEventMask | read-write | current | A string values seperated by a delimiter (see SaHpiEventState for more details) is returned by this object. A string value, separated by a delimiter in the saH… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3.1.9 | ColumnsaHpiCurrentSensorStateDeassertAddEventMask | read-write | current | A string values seperated by a delimiter (see SaHpiEventState for more details) is returned by this object. A string value, seperated by a delimiter in the saH… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.3.1.10 | ColumnsaHpiCurrentSensorStateDeassertRemoveEventMask | read-write | current | A string values seperated by a delimiter (see SaHpiEventState for more details) is returned by this object. A string value, seperated by a delimiter in the saH… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.4 | TablesaHpiSensorReadingMaxTable | not-accessible | current | A table definining maximum sensor readings as defined in the sensor Resource Data Repository |
| 1.3.6.1.4.1.18568.2.1.1.4.9.4.1 | RowsaHpiSensorReadingMaxEntry | not-accessible | current | This table contains the fields used to define the sensor SAHPI_SRF_MAX values. It is representative of the static data found in the SAI-HPI-B.01.01 sensor RDR … |
| 1.3.6.1.4.1.18568.2.1.1.4.9.4.1.1 | ColumnsaHpiSensorReadingMaxIsSupported | read-only | current | IsSupported is set when a sensor reading/threshold value is available. Otherwise, if no reading or threshold is supported, this flag is set to False. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.4.1.2 | ColumnsaHpiSensorReadingMaxType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.4.1.3 | ColumnsaHpiSensorReadingMaxValue | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.5 | TablesaHpiSensorReadingMinTable | not-accessible | current | A table definining minimum sensor readings as defined in the sensor Resource Data Repository. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.5.1 | RowsaHpiSensorReadingMinEntry | not-accessible | current | This table contains the fields used to define the sensor SAHPI_SRF_MIN values. It is representative of the static data found in the SAI-HPI-B.01.01 sensor RDR … |
| 1.3.6.1.4.1.18568.2.1.1.4.9.5.1.1 | ColumnsaHpiSensorReadingMinIsSupported | read-only | current | IsSupported is set when a sensor reading/threshold value is available. Otherwise, if no reading or threshold is supported, this flag is set to False. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.5.1.2 | ColumnsaHpiSensorReadingMinType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.5.1.3 | ColumnsaHpiSensorReadingMinValue | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.6 | TablesaHpiSensorReadingNominalTable | not-accessible | current | A table definining nominal sensor readings. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.6.1 | RowsaHpiSensorReadingNominalEntry | not-accessible | current | This table contains the fields used to define the sensor SAHPI_SRF_NOMINAL values. It is representative of the static data found in the SAI-HPI-B.01.01 sensor … |
| 1.3.6.1.4.1.18568.2.1.1.4.9.6.1.1 | ColumnsaHpiSensorReadingNominalIsSupported | read-only | current | IsSupported is set when a sensor reading/threshold value is available. Otherwise, if no reading or threshold is supported, this flag is set to False. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.6.1.2 | ColumnsaHpiSensorReadingNominalType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.6.1.3 | ColumnsaHpiSensorReadingNominalValue | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.7 | TablesaHpiSensorReadingNormalMaxTable | not-accessible | current | A table definining normal maximum sensor readings. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.7.1 | RowsaHpiSensorReadingNormalMaxEntry | not-accessible | current | This table contains the fields used to define the sensor SAHPI_SRF_NORMAL_MAX values. It is representative of the static data found in the SAI-HPI-B.01.01 sens… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.7.1.1 | ColumnsaHpiSensorReadingNormalMaxIsSupported | read-only | current | IsSupported is set when a sensor reading/threshold value is available. Otherwise, if no reading or threshold is supported, this flag is set to False. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.7.1.2 | ColumnsaHpiSensorReadingNormalMaxType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.7.1.3 | ColumnsaHpiSensorReadingNormalMaxValue | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.8 | TablesaHpiSensorReadingNormalMinTable | not-accessible | current | A table definining normal minimum sensor readings. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.8.1 | RowsaHpiSensorReadingNormalMinEntry | not-accessible | current | This table contains the fields used to define the sensor SAHPI_SRF_NORMAL_MIN values. It is representative of the static data found in the SAI-HPI-B.01.01 sens… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.8.1.1 | ColumnsaHpiSensorReadingNormalMinIsSupported | read-only | current | IsSupported is set when a sensor reading/threshold value is available. Otherwise, if no reading or threshold is supported, this flag is set to False. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.8.1.2 | ColumnsaHpiSensorReadingNormalMinType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.8.1.3 | ColumnsaHpiSensorReadingNormalMinValue | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.9 | TablesaHpiSensorThdLowCriticalTable | not-accessible | current | A table definining the lower critical threshold value. If SAI-HPI-B.01.01 SaHpiSensorThdDefnT field IsAccessible == FALSE then no threshold record is created. … |
| 1.3.6.1.4.1.18568.2.1.1.4.9.9.1 | RowsaHpiSensorThdLowCriticalEntry | not-accessible | current | This is the sensor threshold data for lower critical thresholds. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.9.1.1 | ColumnsaHpiSensorThdLowCriticalIsReadable | read-only | current | Defines if sensor threshold information can be read. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.9.1.2 | ColumnsaHpiSensorThdLowCriticalIsWritable | read-only | current | Defines if sensor threshold information can be written. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.9.1.3 | ColumnsaHpiSensorThdLowCriticalType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.9.1.4 | ColumnsaHpiSensorThdLowCriticalValue | read-write | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.9.1.5 | ColumnsaHpiSensorThdLowCriticalNonLinear | read-only | current | This columnar object flag is set, hysteresis values are calculated at the nominal sensor value. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.10 | TablesaHpiSensorThdLowMajorTable | not-accessible | current | A table definining the lower major threshold value. If SAI-HPI-B.01.01 SaHpiSensorThdDefnT field IsAccessible == FALSE then no threshold record is created. Als… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.10.1 | RowsaHpiSensorThdLowMajorEntry | not-accessible | current | This is the sensor threshold data for lower major thresholds. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.10.1.1 | ColumnsaHpiSensorThdLowMajorIsReadable | read-only | current | Defines if sensor threshold information can be read. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.10.1.2 | ColumnsaHpiSensorThdLowMajorIsWritable | read-only | current | Defines if sensor threshold information can be written. If set to 'false(2)' writting to saHpiSensorThdLowMajorRaw and saHpiSensorThdLowMajorInterpreted will n… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.10.1.3 | ColumnsaHpiSensorThdLowMajorType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.10.1.4 | ColumnsaHpiSensorThdLowMajorValue | read-write | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.10.1.5 | ColumnsaHpiSensorThdLowMajorNonLinear | read-only | current | This columnar object flag is set, hysteresis values are calculated at the nominal sensor value. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.11 | TablesaHpiSensorThdLowMinorTable | not-accessible | current | A table definining the lower minor threshold value. If SAI-HPI-B.01.01 SaHpiSensorThdDefnT field IsAccessible == FALSE then no threshold record is created. Als… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.11.1 | RowsaHpiSensorThdLowMinorEntry | not-accessible | current | Sensor threshold data for lower minor thresholds. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.11.1.1 | ColumnsaHpiSensorThdLowMinorIsReadable | read-only | current | Defines if sensor threshold information can be read. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.11.1.2 | ColumnsaHpiSensorThdLowMinorIsWritable | read-only | current | Defines if sensor threshold information can be written. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.11.1.3 | ColumnsaHpiSensorThdLowMinorType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.11.1.4 | ColumnsaHpiSensorThdLowMinorValue | read-write | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.11.1.5 | ColumnsaHpiSensorThdLowMinorNonLinear | read-only | current | This columnar object flag is set, hysteresis values are calculated at the nominal sensor value. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.12 | TablesaHpiSensorThdUpCriticalTable | not-accessible | current | A table definining the upper critical threshold value. If SAI-HPI-B.01.01 SaHpiSensorThdDefnT field IsAccessible == FALSE then no threshold record is created. … |
| 1.3.6.1.4.1.18568.2.1.1.4.9.12.1 | RowsaHpiSensorThdUpCriticalEntry | not-accessible | current | Sensor threshold data for upper critical thresholds. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.12.1.1 | ColumnsaHpiSensorThdUpCriticalIsReadable | read-only | current | Defines if sensor threshold information can be read. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.12.1.2 | ColumnsaHpiSensorThdUpCriticalIsWritable | read-only | current | Defines if sensor threshold information can be written. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.12.1.3 | ColumnsaHpiSensorThdUpCriticalType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.12.1.4 | ColumnsaHpiSensorThdUpCriticalValue | read-write | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.12.1.5 | ColumnsaHpiSensorThdUpCriticalNonLinear | read-only | current | This columnar object flag is set, hysteresis values are calculated at the nominal sensor value. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.13 | TablesaHpiSensorThdUpMajorTable | not-accessible | current | A table definining the upper major threshold value. If SAI-HPI-B.01.01 SaHpiSensorThdDefnT field IsAccessible == FALSE then no threshold record is created. Als… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.13.1 | RowsaHpiSensorThdUpMajorEntry | not-accessible | current | Sensor threshold data for upper major thresholds. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.13.1.1 | ColumnsaHpiSensorThdUpMajorIsReadable | read-only | current | Defines if sensor threshold information can be read |
| 1.3.6.1.4.1.18568.2.1.1.4.9.13.1.2 | ColumnsaHpiSensorThdUpMajorIsWritable | read-only | current | Defines if sensor threshold information can be written. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.13.1.3 | ColumnsaHpiSensorThdUpMajorType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.13.1.4 | ColumnsaHpiSensorThdUpMajorValue | read-write | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.13.1.5 | ColumnsaHpiSensorThdUpMajorNonLinear | read-only | current | This columnar object flag is set, hysteresis values are calculated at the nominal sensor value. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.14 | TablesaHpiSensorThdUpMinorTable | not-accessible | current | A table definining the upper minor threshold value. If SAI-HPI-B.01.01 SaHpiSensorThdDefnT field IsAccessible == FALSE then no threshold record is created. Als… |
| 1.3.6.1.4.1.18568.2.1.1.4.9.14.1 | RowsaHpiSensorThdUpMinorEntry | not-accessible | current | Sensor threshold data for upper minor thresholds. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.14.1.1 | ColumnsaHpiSensorThdUpMinorIsReadable | read-only | current | Defines if sensor threshold information can be read. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.14.1.2 | ColumnsaHpiSensorThdUpMinorIsWritable | read-only | current | Defines if sensor threshold information can be written. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.14.1.3 | ColumnsaHpiSensorThdUpMinorType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.14.1.4 | ColumnsaHpiSensorThdUpMinorValue | read-write | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.14.1.5 | ColumnsaHpiSensorThdUpMinorNonLinear | read-only | current | This columnar object flag is set, hysteresis values are calculated at the nominal sensor value. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.15 | TablesaHpiSensorThdPosHysteresisTable | not-accessible | current | A table definining the positive going hysteresis upper bound. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.15.1 | RowsaHpiSensorThdPosHysteresisEntry | not-accessible | current | This is the sensor hysteresis data which defines hysteresis values at the positive upper bound. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.15.1.1 | ColumnsaHpiSensorThdPosHysteresisIsReadable | read-only | current | Defines if sensor hysteresis information can be read. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.15.1.2 | ColumnsaHpiSensorThdPosHysteresisIsWritable | read-only | current | Defines if sensor hysteresis information can be written. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.15.1.3 | ColumnsaHpiSensorThdPosHysteresisType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.15.1.4 | ColumnsaHpiSensorThdPosHysteresisValue | read-write | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.15.1.5 | ColumnsaHpiSensorThdPosHysteresisNonLinear | read-only | current | This columnar object flag is set, hysteresis values are calculated at the nominal sensor value. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.16 | TablesaHpiSensorThdNegHysteresisTable | not-accessible | current | A table definining the negative going hysteresis lower bound. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.16.1 | RowsaHpiSensorThdNegHysteresisEntry | not-accessible | current | This is the sensor hysteresis data which defines hysteresis values at the negative lower bound for a given sensor. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.16.1.1 | ColumnsaHpiSensorThdNegHysteresisIsReadable | read-only | current | Defines if sensor hysteresis information can be read. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.16.1.2 | ColumnsaHpiSensorThdNegHysteresisIsWritable | read-only | current | Defines if sensor hysteresis information can be written. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.16.1.3 | ColumnsaHpiSensorThdNegHysteresisType | read-only | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.16.1.4 | ColumnsaHpiSensorThdNegHysteresisValue | read-write | current | See Definition in TEXTUAL-CONVENTION. |
| 1.3.6.1.4.1.18568.2.1.1.4.9.16.1.5 | ColumnsaHpiSensorThdNegHysteresisNonLinear | read-only | current | This columnar object flag is set, hysteresis values are calculated at the nominal sensor value. |
| 1.3.6.1.4.1.18568.2.1.1.5 | NodehpiNotifications | |||
| 1.3.6.1.4.1.18568.2.1.1.5.0 | NodehpiNotificationPrefix | |||
| 1.3.6.1.4.1.18568.2.1.1.5.0.1 | NotificationsaHpiSensorNotification | current | Sensor event notification. | |
| 1.3.6.1.4.1.18568.2.1.1.5.0.2 | NotificationsaHpiSensorEnableChangeNotification | current | Sensor enable change event notification. | |
| 1.3.6.1.4.1.18568.2.1.1.5.0.3 | NotificationsaHpiResourceNotification | current | Resource failure/restoration event notifications. | |
| 1.3.6.1.4.1.18568.2.1.1.5.0.4 | NotificationsaHpiDomainNotification | current | Domain events are used to announce the addition of domain references and the removal of domain references to the DRT. | |
| 1.3.6.1.4.1.18568.2.1.1.5.0.5 | NotificationsaHpiWatchdogNotification | current | Watchdog notification. | |
| 1.3.6.1.4.1.18568.2.1.1.5.0.6 | NotificationsaHpiHotSwapNotification | current | Hot swap notification. | |
| 1.3.6.1.4.1.18568.2.1.1.5.0.7 | NotificationsaHpiSoftwareNotification | current | Audit events report a discrepancy in the audit process. Audits are typically performed by HA software to detect problems. Audits may look for such things as co… | |
| 1.3.6.1.4.1.18568.2.1.1.5.0.8 | NotificationsaHpiOemNotification | current | Oem event notifications. | |
| 1.3.6.1.4.1.18568.2.1.1.5.0.9 | NotificationsaHpiUserNotification | current | User events may be used for storing custom events created by an HPI User when injecting events into the Event Log using saHpiEventLogEntryAdd(). | |
| 1.3.6.1.4.1.18568.2.1.1.6 | NodehpiConformance | |||
| 1.3.6.1.4.1.18568.2.1.1.6.1 | NodehpiGroups | |||
| 1.3.6.1.4.1.18568.2.1.1.6.1.1 | GroupsaHpiDomainInfoGroup | current | saHpiDomainInfo table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.2 | GroupsaHpiDomainReferenceGroup | current | saHpiDomainReference table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.3 | GroupsaHpiDomainAlarmGroup | current | saHpiDomainAlarm table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.4 | GroupsaHpiResourceGroup | current | saHpiResource table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.5 | GroupsaHpiAutoInsertTimeoutGroup | current | saHpiAutoInsertTimeout table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.6 | GroupsaHpiHotSwapGroup | current | saHpiHotSwap table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.7 | GroupsaHpiEventGroup | current | saHpiEvent table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.8 | GroupsaHpiResourceEventGroup | current | saHpiResourceEvent table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.9 | GroupsaHpiDomainEventGroup | current | saHpiDomainEvent table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.10 | GroupsaHpiSensorEventGroup | current | saHpiSensorEvent table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.11 | GroupsaHpiSensorEnableChangeEventGroup | current | saHpiSensorEnableChangeEvent table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.12 | GroupsaHpiHotSwapEventGroup | current | saHpiHotSwapEvent table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.13 | GroupsaHpiWatchdogEventGroup | current | saHpiWatchdogEvent table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.14 | GroupsaHpiSoftwareEventGroup | current | saHpiSoftwareEvent table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.15 | GroupsaHpiOemEventGroup | current | saHpiOemEvent table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.16 | GroupsaHpiUserEventGroup | current | saHpiUserEvent table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.17 | GroupsaHpiAnnouncementGroup | current | saHpiAnnouncement table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.18 | GroupsaHpiEventLogInfoGroup | current | saHpiEventLogInfo table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.19 | GroupsaHpiEventLogGroup | current | saHpiEventLog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.20 | GroupsaHpiResourceEventLogGroup | current | saHpiResourceEventLog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.21 | GroupsaHpiDomainEventLogGroup | current | saHpiDomainEventLog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.22 | GroupsaHpiSensorEventLogGroup | current | saHpiSensorEventLog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.23 | GroupsaHpiSensorEnableChangeEventLogGroup | current | saHpiSensorEnableChangeEventLog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.24 | GroupsaHpiHotSwapEventLogGroup | current | saHpiHotSwapEventLog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.25 | GroupsaHpiWatchdogEventLogGroup | current | saHpiWatchdogEventLog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.26 | GroupsaHpiSoftwareEventLogGroup | current | saHpiSoftwareEventLog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.27 | GroupsaHpiOemEventLogGroup | current | saHpiOemEventLog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.28 | GroupsaHpiUserEventLogGroup | current | saHpiUserEventLog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.29 | GroupsaHpiRdrGroup | current | saHpiRdr table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.30 | GroupsaHpiCtrlDigitalGroup | current | saHpiCtrlDigital table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.31 | GroupsaHpiCtrlDiscreteGroup | current | saHpiCtrlDiscrete table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.32 | GroupsaHpiCtrlAnalogGroup | current | saHpiCtrlAnalog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.33 | GroupsaHpiCtrlStreamGroup | current | saHpiCtrlStream table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.34 | GroupsaHpiCtrlTextGroup | current | saHpiCtrlText table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.35 | GroupsaHpiCtrlOemGroup | current | saHpiCtrlOem table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.36 | GroupsaHpiSensorGroup | current | saHpiSensor table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.37 | GroupsaHpiCurrentSensorStateGroup | current | saHpiCurrentSensorState table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.38 | GroupsaHpiSensorReadingMaxGroup | current | saHpiSensorReadingMax table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.39 | GroupsaHpiSensorReadingMinGroup | current | saHpiSensorReadingMin table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.40 | GroupsaHpiSensorReadingNominalGroup | current | saHpiSensorReadingNominal table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.41 | GroupsaHpiSensorReadingNormalMaxGroup | current | saHpiSensorReadingNormalMax table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.42 | GroupsaHpiSensorReadingNormalMinGroup | current | saHpiSensorReadingNormalMin table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.43 | GroupsaHpiSensorThdLowCriticalGroup | current | saHpiSensorThdLowCritical table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.44 | GroupsaHpiSensorThdLowMajorGroup | current | saHpiSensorThdLowMajor table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.45 | GroupsaHpiSensorThdLowMinorGroup | current | saHpiSensorThdLowMinor table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.46 | GroupsaHpiSensorThdUpCriticalGroup | current | saHpiSensorThdUpCritical table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.47 | GroupsaHpiSensorThdUpMajorGroup | current | saHpiSensorThdUpMajor table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.48 | GroupsaHpiSensorThdUpMinorGroup | current | saHpiSensorThdUpMinor table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.49 | GroupsaHpiSensorThdPosHysteresisGroup | current | saHpiSensorThdPosHysteresis table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.50 | GroupsaHpiSensorThdNegHysteresisGroup | current | saHpiSensorThdNegHysteresis table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.51 | GroupsaHpiInventoryGroup | current | saHpiInventory table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.52 | GroupsaHpiAreaGroup | current | saHpiArea table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.53 | GroupsaHpiFieldGroup | current | saHpiField table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.54 | GroupsaHpiWatchdogGroup | current | saHpiWatchdog table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.55 | GroupsaHpiAnnunciatorGroup | current | saHpiAnnunciator table. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.56 | GroupsaHpiNotificationGroup | current | Notification group. | |
| 1.3.6.1.4.1.18568.2.1.1.6.1.57 | GroupsaHpiAdministrationGroup | current | Administration group. | |
| 1.3.6.1.4.1.18568.2.1.1.6.2 | NodehpiCompliances | |||
| 1.3.6.1.4.1.18568.2.1.1.6.2.1 | CompliancesaHpiCompliance | current | The compliance statement for SNMP hardware platform entities. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Double | OCTET STRING (SIZE (0..8)) | current | Textual convention for an 64 bit float number, 8 byte alignment data type. |
| SaHpiCtrlMode | INTEGER { undefined(0), auto(1), manual(2) } | current | Controls may be in either auto(1) mode or manual(2) mode. |
| SaHpiCtrlOutputType | INTEGER { undefined(0), generic(1), led(2), fanSpeed(3), dryContactClosure(4), powerSupplyInhibit(5), audible(6), frontPanelLockout(7), powerInterlock(8), powerState(9), lcdDisplay(10), oem(11) } | current | This textual convention defines what the control's output will be. |
| SaHpiCtrlStateDigital | INTEGER { undefined(0), off(1), on(2), pulseOff(3), pulseOn(4) } | current | Defines the types of digital control states. Any of the four states may be set using saHpiCtrlDigitalState columnar object. Only on(2) or off(1) are appropriate returns from saHpiCtrlDigitalState columnar object. pulseO… |
| SaHpiDomainId | Unsigned32 | current | Domain identifier. The number is unique within the system. |
| SaHpiEntityPath | OCTET STRING (SIZE (0..255)) | current | Entity Path associated with Announcement. This object converts HPI's saHpiEntityPathT structure to a canonical string. This string is formed by removing the SAHPI_ENT_ prefix from the HPI types, and creating tuples for … |
| SaHpiEntryId | Unsigned32 | current | Textual convention for the entry ID of a record. This value is used to enumerate the indexes of records that are held by HPI. There are three different unique values to denote the first, last, and unspecified entries in… |
| SaHpiEventCategory | INTEGER { undefined(0), unspecified(1), threshold(2), usage(3), state(4), predFail(5), limit(6), performance(7), severity(8), presence(9), enable(10), availability(11), redundancy(12), sensorSpecific(127), generic(128) } | current | This textual convention defines the enumeration of event categories and is used extensivly by sensors and events. Depending on the event category, the event states (defined by the textual convention SaHpiEventState) tak… |
| SaHpiEventState | OCTET STRING (SIZE (0..255)) | current | The following event states are available for variables using the saHpiEventCategory textual convention to provide event origin information. Each set of events is uniquely identified with a label which easily refers back… |
| SaHpiGuid | OCTET STRING (SIZE (0..15)) | current | This textual convention defines the Globally Unique Identifier (GUID) which is used to uniquely identify a domain. A GUID value of zero is not valid and indicates that the domain does not have an associated GUID. The fo… |
| SaHpiHotSwapState | INTEGER { undefined(0), inactive(1), insertionPending(2), active(3), extractionPending(4), notPresent(5) } | current | This textual convention defines the enumeration of states specific to Hot Swap records. They are: inactive(1): The inactive(1) state indicates that the FRU, which supports the full hot swap model, is no longer active in… |
| SaHpiInstrumentId | Unsigned32 | current | Textual convention for all HPI MIB management instrument identifiers - sensor numbers, control numbers, watchdog timer numbers, etc. |
| SaHpiManufacturerId | Unsigned32 | current | Textual convention for the identifier of the manufacturer. SAHPI_MANUFACTURER_ID_UNSPECIFIED == 0 is used when no value is assigned. This is the IANA-assigned private enterprise number for the manufacturer of the resour… |
| SaHpiOptionalData | OCTET STRING (SIZE (0..255)) | current | Sensor events may contain optional data items passed and stored with the event. If these optional data items are present, they will be included with the event data. This texual definition defines the types of optional d… |
| SaHpiSensorReadingType | INTEGER { undefined(0), int64(1), uint64(2), float64(3), buffer(4), notSupported(5) } | current | This textual convention defines the enumeration of the available data types that can be used for sensor readings. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| SaHpiSensorReadingValue | OCTET STRING (SIZE (0..255)) | current | This textual convention defines the sensor reading value as represented as one of the enumerated types listed in SaHpiSensorReadingType textual convention. This value by itself is of string type and needs to be evaluate… |
| SaHpiSensorType | INTEGER { undefined(0), temperature(2), voltage(3), current(4), fan(5), physicalSecurity(6), platformViolation(7), processor(8), powerSupply(9), powerUnit(10), coolingDevice(11), otherUnitsBasedSensor(12), memory(13), driveSlot(14), postMemoryResize(15), systemFwProgress(16), eventLoggingDisabled(17), reserved1(18), systemEvent(19), criticalInterrupt(20), button(21), moduleBoard(22), microcontrollerCoProcessor(23), addinCard(24), chassis(25), chipSet(26), otherFru(27), cableInterconnect(28), terminator(29), systemBootInitiated(30), bootError(31), osBoot(32), osCriticalStop(33), slotConnector(34), systemACPIPowerState(35), reserved2(36), platformAlert(37), entityPresence(38), monitorAsicIC(39), lan(40), managementSubsystemHealth(41), battery(42), operational(161), oemSensor(193) } | current | This textual convention describes the general sensor types. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| SaHpiSensorUnits | INTEGER { undefined(0), unspecified(1), degreesC(2), degreesF(3), degreesK(4), volts(5), amps(6), watts(7), joules(8), coulombs(9), va(10), nits(11), lumen(12), lux(13), candela(14), kpa(15), psi(16), newton(17), cfm(18), rpm(19), hz(20), microsecond(21), millisecond(22), second(23), minute(24), hour(25), day(26), week(27), mil(28), inches(29), feet(30), cuInches(31), cuFeet(32), mm(33), cm(34), m(35), cuCm(36), cuM(37), liters(38), fluidOunce(39), radians(40), steradians(41), revolutions(42), cycles(43), gravities(44), ounce(45), pound(46), ftLbs(47), ozInches(48), gauss(49), gilberts(50), henry(51), millihenry(52), farad(53), microfarad(54), ohms(55), siemens(56), mole(57), becquerel(58), ppm(59), reserved(60), decibels(61), dba(62), dbc(63), gray(64), sievert(65), colorTempDegK(66), bit(67), kilobit(68), megabit(69), gigabit(70), byte(71), kilobyte(72), megabyte(73), gigabyte(74), word(75), dword(76), qword(77), line(78), hit(79), miss(80), retry(81), reset(82), overrun(83), underrun(84), collision(85), packets(86), messages(87), characters(88), errors(89), correctableErrors(90), uncorrectableErrors(91) } | current | This textual convention enumerates the all of the sensor units supported by HPI. Note: Enumerated values are increased by one value compared to SAI-HPI-B.01.01 spec. |
| SaHpiSeverity | INTEGER { undefined(0), critical(1), major(2), minor(3), informational(4), ok(5), debug(6), allSeverities(7) } | current | This textual convention defines the severity levels. When using these event severities the event severity should match the event state (for example minor(3) should have an event state of LOWER_MINOR). The possible level… |
| SaHpiStatusCondType | INTEGER { undefined(0), sensor(1), resource(2), oem(3), user(4) } | current | This textual convention defines the types of announcements available: sensor (1), resource (2) oem (3) user (4) |
| SaHpiText | OCTET STRING (SIZE (0..255)) | current | This textual convention defines the Text data. The data can be in different languages (represented by SaHpiTextLanguage textual convention) and in different encodings (represented by saHpiTextType textual convention). |
| SaHpiTextLanguage | INTEGER { undefined(0), unknown(1), afar(2), abkhazian(3), afrikaans(4), amharic(5), arabic(6), assamese(7), aymara(8), azerbaijani(9), bashkir(10), byelorussian(11), bulgarian(12), bihari(13), bislama(14), bengali(15), tibetan(16), breton(17), catalan(18), corsican(19), czech(20), welsh(21), danish(22), german(23), bhutani(24), greek(25), english(26), esperanto(27), spanish(28), estonian(29), basque(30), persian(31), finnish(32), fiji(33), faeroese(34), french(35), frisian(36), irish(37), scotsgaelic(38), galician(39), guarani(40), gujarati(41), hausa(42), hindi(43), croatian(44), hungarian(45), armenian(46), interlingua(47), interlingue(48), inupiak(49), indonesian(50), icelandic(51), italian(52), hebrew(53), japanese(54), yiddish(55), javanese(56), georgian(57), kazakh(58), greenlandic(59), cambodian(60), kannada(61), korean(62), kashmiri(63), kurdish(64), kirghiz(65), latin(66), lingala(67), laothian(68), lithuanian(69), latvianlettish(70), malagasy(71), maori(72), macedonian(73), malayalam(74), mongolian(75), moldavian(76), marathi(77), malay(78), maltese(79), burmese(80), nauru(81), nepali(82), dutch(83), norwegian(84), occitan(85), afanoromo(86), oriya(87), punjabi(88), polish(89), pashtopushto(90), portuguese(91), quechua(92), rhaetoromance(93), kirundi(94), romanian(95), russian(96), kinyarwanda(97), sanskrit(98), sindhi(99), sangro(100), serbocroatian(101), singhalese(102), slovak(103), slovenian(104), samoan(105), shona(106), somali(107), albanian(108), serbian(109), siswati(110), sesotho(111), sudanese(112), swedish(113), swahili(114), tamil(115), telugu(116), tajik(117), thai(118), tigrinya(119), turkmen(120), tagalog(121), setswana(122), tonga(123), turkish(124), tsonga(125), tatar(126), twi(127), ukrainian(128), urdu(129), uzbek(130), vietnamese(131), volapuk(132), wolof(133), xhosa(134), yoruba(135), chinese(136), zulu(137) } | current | This textual convention defines these enumeration of all of the languages that can be associated with text. undefined (0) indicates that the language is unspecified or unknown. Note: Enumerated values are increased by o… |
| SaHpiTextType | INTEGER { undefined(0), unicode(1), bcdplus(2), ascii6(3), text(4), binary(5) } | current | This textual convention defines the enumeration type of text value. The encoding of the SaHpiText type is defined by this enumeration. The following table describes the various encodings: DataType Encoding unicode 16-bi… |
| SaHpiTime | OCTET STRING (SIZE (8)) | current | This textual convention defines the HPI time value as an 64-bit value. An HPI time value represents the local time as the number of nanoseconds from 00:00:00, January 1, 1970, in a 64-bit signed integer. This format is … |
| SaHpiWatchdogPreTimerAction | INTEGER { undefined(0), none(1), smi(2), nmi(3), messageInterrupt(4), oem(16) } | current | This textual convention defines the enumerations which represent the possible types of interrupts that may be triggered by a watchdog pre-timer event. The actual meaning of these operations may differ depending on the h… |
| SaHpiWatchdogTimerUse | INTEGER { undefined(0), none(1), biosFrb2(2), biosPost(3), osLoad(4), smsOs(5), oem(6), unspecified(16) } | current | The textual convention defines the enumerations which represent the possible watchdog uses that may have caused the watchdog to expire. For instance, if watchdog is being used during power on self test (POST), and it ex… |
| Unsigned16 | Integer32 (0..65535) | current | Textual convention for an unsigned 16-bit data, 2-byte alignment data type. |
| Unsigned8 | Integer32 (0..255) | current | Textual convention for an unsigned 8-bit data type. |