HPSWITCH-MIB
56 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.14 | Nodeicf | |||
| 1.3.6.1.4.1.11.2.14.6 | NodeicfEswitch | |||
| 1.3.6.1.4.1.11.2.14.6.1 | NodehpEs | |||
| 1.3.6.1.4.1.11.2.14.6.1.1 | NodehpEsMain | |||
| 1.3.6.1.4.1.11.2.14.6.1.1.1 | NodehpEsConfig | |||
| 1.3.6.1.4.1.11.2.14.6.1.1.1.1 | ScalarhpEsFwVer | read-only | mandatory | The firmware version in the form major.minor. |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.2 | ScalarhpEsHwVer | read-only | mandatory | The hardware version in the form major.minor. |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.3 | ScalarhpEsIpAddr | read-write | mandatory | The administrative value of the IP address. The current operational IP address can be obtained by the ipAdEntAddr entry in the ipAddrTable. This parameter will… |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.4 | ScalarhpEsNetMask | read-write | mandatory | The administrative value of the subnet mask. The current operational subnet mask can be obtained by the ipAdEntNetMask entry in the ipAddrTable. This parameter… |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.5 | ScalarhpEsDefaultGateway | read-write | mandatory | The administrative value of the default gateway (router) IP address. The current operational default gateway's IP address can be obtained from the ipRouteTable… |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.6 | ScalarhpEsTrapRcvrMaxEnt | read-only | mandatory | The maximum number of rows in the trap receiver table. |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.7 | ScalarhpEsTrapRcvrCurEnt | read-only | mandatory | The current number of rows in the trap receiver table. |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.8 | ScalarhpEsTrapRcvrNext | read-only | mandatory | The index of the next available row to be created in the trap receiver table. A value of zero means that the table is full and no more rows can be added. |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.9 | TablehpEsTrapRcvrTable | not-accessible | mandatory | A table of managers to which to send traps. Entries in the table are saved across resets and power cycles. |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.9.1 | RowhpEsTrapRcvrEntry | not-accessible | mandatory | Definition of rows in the trap receiver table. The column hpEsTrapRcvrStatus is used to create and delete rows in the table. Creation requires a SET PDU with o… |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.9.1.1 | ColumnhpEsTrapRcvrIndex | read-only | mandatory | The index of the row in the table. |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.9.1.2 | ColumnhpEsTrapRcvrStatus | read-write | mandatory | Setting this object to the value invalid(3) deletes the row from the table. The value invalid(3) should never be returned on a GET. The value of create(4) on a… |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.9.1.3 | ColumnhpEsTrapRcvrIpAddress | read-write | mandatory | IP address for an SNMP manager that is to receive the trap. |
| 1.3.6.1.4.1.11.2.14.6.1.1.1.9.1.4 | ColumnhpEsTrapRcvrComm | read-write | mandatory | Community string to use. |
| 1.3.6.1.4.1.11.2.14.6.1.1.2 | NodehpEsSys | |||
| 1.3.6.1.4.1.11.2.14.6.1.1.2.1 | ScalarhpEsNumPorts | read-only | mandatory | The maximum number of ports on the switch. |
| 1.3.6.1.4.1.11.2.14.6.1.1.2.2 | ScalarhpEsNumStations | read-only | mandatory | Aggregate number of currently active stations (nodes) on all ports on the switch. This is the value from the system module. |
| 1.3.6.1.4.1.11.2.14.6.1.1.2.3 | ScalarhpEsMostStations | read-only | mandatory | Highest aggregate number of stations ever active on all ports at one time, since the last reset or power cycle. This is the value as seen by the system module. |
| 1.3.6.1.4.1.11.2.14.6.1.1.2.4 | ScalarhpEsMaxStations | read-only | mandatory | Highest aggregate number of stations which the switch can support simultaneously. (This is the maximum number that the system module can support.) |
| 1.3.6.1.4.1.11.2.14.6.1.1.2.5 | ScalarhpEsReset | read-write | mandatory | This object is used to reset the switch. Writing softReset(3) causes the switch to reset the hardware, run quick diagnostics, clear all counters, start switchi… |
| 1.3.6.1.4.1.11.2.14.6.1.1.2.6 | ScalarhpEsNumResets | read-only | mandatory | Number of soft resets the switch has executed since the last hard reset or power cycle. Soft resets are defined as writing softReset(3) to hpEsReset, pressing … |
| 1.3.6.1.4.1.11.2.14.6.1.1.2.7 | ScalarhpEsAddrAgingTime | read-write | mandatory | Number of minutes of inactivity before an address entity is aged out. A value of zero means no aging. Note: if an address shows up on another port, the origina… |
| 1.3.6.1.4.1.11.2.14.6.1.1.2.9 | TablehpEsSysStaTable | not-accessible | mandatory | A table of station addresses from all ports known to the system module. |
| 1.3.6.1.4.1.11.2.14.6.1.1.2.9.1 | RowhpEsSysStaEntry | not-accessible | mandatory | Definition of the rows in the system module station address table. Rows can not be created or deleted via SNMP requests. |
| 1.3.6.1.4.1.11.2.14.6.1.1.2.9.1.1 | ColumnhpEsSysStaMacAddr | read-only | mandatory | The Station's MAC address. |
| 1.3.6.1.4.1.11.2.14.6.1.1.2.9.1.2 | ColumnhpEsSysStaPort | read-only | mandatory | The source port for the Station. |
| 1.3.6.1.4.1.11.2.14.6.1.1.2.9.1.3 | ColumnhpEsSysStaTraffic | read-only | mandatory | A bit string that identifies with value of one of the ports that this station has generated traffic to or from. The bits are numbered starting at zero, with bi… |
| 1.3.6.1.4.1.11.2.14.6.1.2 | NodehpEsTop | |||
| 1.3.6.1.4.1.11.2.14.6.1.3 | NodehpEsPort | |||
| 1.3.6.1.4.1.11.2.14.6.1.3.1 | TablehpEsPortTable | not-accessible | mandatory | A table of information about each port. The number of rows is given by hpEsNumPorts. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1 | RowhpEsPortEntry | not-accessible | mandatory | Definition of rows in the port table. The number of rows is determined by the hardware and is specified by the value of hpEsNumPorts. Rows can not be created o… |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.1 | ColumnhpEsPortIndex | read-only | mandatory | A unique value for each port entry. The value corresponds the port number. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.2 | ColumnhpEsPortOprStatus | read-write | mandatory | The operational status of the port. Setting to enabled(1) enables the port. Setting to disabled(2) disables the port. The value is saved across resets and powe… |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.5 | ColumnhpEsPortExtConn | read-only | mandatory | Which external connector has been configured via jumpers. For EPS1500, this object will always return AUI. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.6 | ColumnhpEsPortDuplex | read-only | mandatory | Indicates whether the port is jumper configured for full or half duplex operation. Note: internal connected ports are always halfDuplex(2). |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.7 | ColumnhpEsPortRcvLocalFrames | read-only | mandatory | Number of frames received where the destination is on this port. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.8 | ColumnhpEsPortForwardedFrames | read-only | mandatory | Number of frames received on this port and forwarded to another port. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.10 | ColumnhpEsPortMostStations | read-only | mandatory | Highest number of stations ever active at any time since the last reset of the switch as seen by this port. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.11 | ColumnhpEsPortMaxStations | read-only | mandatory | Maximum number of stations which the port can support simultaneously. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.12 | ColumnhpEsPortSWHandledFrames | read-only | mandatory | Number of Frames received on this port and delivered to the system module for processing. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.13 | ColumnhpEsPortLocalStations | read-only | mandatory | Number of stations on this port which belong to the local segment. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.14 | ColumnhpEsPortRemoteStations | read-only | mandatory | Number of stations on this port which belong to another segment. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.15 | ColumnhpEsPortUnknownStaFrames | read-only | mandatory | Number of unicast frames received on this port and forwarded to the system module for processing because the source or destination station address is not in th… |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.16 | ColumnhpEsPortResetStats | read-write | mandatory | Setting this object to reset(3) causes all traffic counters for this port to be set to zero. Also the value of hpEsPortResetTimer is set to zero. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.17 | ColumnhpEsPortResetTimer | read-only | mandatory | Time (in 100th second ticks) since the port counters were reset. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.18 | ColumnhpEsPortResetAddrs | read-write | mandatory | Setting this object to reset(3) clears all address table entries for this port as well as setting all port traffic counters to zero and setting hpEsPortResetTi… |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.20 | ColumnhpEsPortRcvBcasts | read-only | mandatory | Number of Broadcast Frames received on this port without errors. |
| 1.3.6.1.4.1.11.2.14.6.1.3.1.1.25 | ColumnhpEsPortSwitchedFrames | read-only | mandatory | Number of frames switched on this port |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddr | OCTET STRING (SIZE(6)) |