HUAWEI-ADSLNNI-MIB
96 objects
This MIB is used for defining Huawei's ADSLNNI management MIB objects.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.143 | IdentityhwAdslnniMIB | This MIB is used for defining Huawei's ADSLNNI management MIB objects. | ||
| 1.3.6.1.4.1.2011.6.143.1 | NodehwAdslnni | |||
| 1.3.6.1.4.1.2011.6.143.1.1 | NodehwAdslnniCfg | |||
| 1.3.6.1.4.1.2011.6.143.1.1.1 | TablehwAdslnniPvcCfgTable | not-accessible | current | Table hwAdslnniPvcCfgTable config the PVC of ADSLNNI is used to set and query the ADSL upstream VPI/VCI. This table is used for the bonding group instead of th… |
| 1.3.6.1.4.1.2011.6.143.1.1.1.1 | RowhwAdslnniPvcCfgEntry | not-accessible | current | Table hwAdslnniPvcCfgTable config the PVC of ADSLNNI is used to set and query the ADSL upstream VPI/VCI. This table is used for the bonding group instead of th… |
| 1.3.6.1.4.1.2011.6.143.1.1.1.1.1 | ColumnhwAdslnniPvcVpi | read-write | current | The VPI of the adslnni port. |
| 1.3.6.1.4.1.2011.6.143.1.1.1.1.2 | ColumnhwAdslnniPvcVci | read-write | current | The VCI of the adslnni port. |
| 1.3.6.1.4.1.2011.6.143.1.1.2 | TablehwAdslnniInventoryTable | not-accessible | current | The table hwAdslnniInventoryTable contains inventory of the ADSL2 units. The indexes of this table are ifIndex and hwAdslnniLInvUnit. |
| 1.3.6.1.4.1.2011.6.143.1.1.2.1 | RowhwAdslnniInventoryEntry | not-accessible | current | The table hwAdslnniInventoryTable contains inventory of the ADSL2 units. The indexes of this entry are ifIndex and hwAdslnniLInvUnit. |
| 1.3.6.1.4.1.2011.6.143.1.1.2.1.1 | ColumnhwAdslnniLInvUnit | not-accessible | current | The termination unit atuc(1) or atur(2). |
| 1.3.6.1.4.1.2011.6.143.1.1.2.1.2 | ColumnhwAdslnniLInvG994VendorId | read-only | current | The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocat… |
| 1.3.6.1.4.1.2011.6.143.1.1.2.1.3 | ColumnhwAdslnniLInvSystemVendorId | read-only | current | The ATU System Vendor ID (identifies the ATU system integrator) as inserted in the Overhead Messages (both ATUs for G.992.3 and G.992.4) or in the Embedded Ope… |
| 1.3.6.1.4.1.2011.6.143.1.1.2.1.4 | ColumnhwAdslnniLInvVersionNumber | read-only | current | The ATU version number (vendor-specific information) as inserted in the Overhead Messages (both ATUs for G.992.3 and G.992.4) or in the Embedded Operations Cha… |
| 1.3.6.1.4.1.2011.6.143.1.1.2.1.5 | ColumnhwAdslnniLInvSerialNumber | read-only | current | The ATU serial number (vendor-specific information) as inserted in the Overhead Messages (both ATUs for G.992.3 and G.992.4) or in the Embedded Operations Chan… |
| 1.3.6.1.4.1.2011.6.143.1.1.2.1.6 | ColumnhwAdslnniLInvSelfTestResult | read-only | current | The ATU self-test result, coded as a 32-bit value. The most significant octet of the result is '0' if the self-test passed, and '1' if the self-test failed. Th… |
| 1.3.6.1.4.1.2011.6.143.1.1.2.1.7 | ColumnhwAdslnniLInvTransmissionCapabilities | read-only | current | The ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' me… |
| 1.3.6.1.4.1.2011.6.143.1.1.3 | TablehwAdslnniLineTable | not-accessible | current | The table hwAdslnniLineTable contains configuration, commands, and status parameters of the ADSL2 line. The index of this table is an interface index where the… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1 | RowhwAdslnniLineEntry | not-accessible | current | The table hwAdslnniLineTable contains configuration, commands, and status parameters of the ADSL2 line. The index of this entry is an interface index where the… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.1 | ColumnhwAdslnniLineStatusAtuTransSys | read-only | current | The ATU Transmission System (ATS) in use. It is coded in a bit-map representation with only a single bit set to '1' (the selected coding for the ADSL line). Th… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.2 | ColumnhwAdslnniLineStatusPwrMngState | read-only | current | The current power management state. Options: 1. L0(1) - Synchronized and full transmission (i.e., Showtime). 2. L1(2) - Low Power with reduced net data rate (G… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.3 | ColumnhwAdslnniLineStatusInitResult | read-only | current | Indicates the result of the last full initialization performed on the line. Options: 1. noFail(0) -Indicates that no abnormity occurs. 2. configError(1) -Indic… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.4 | ColumnhwAdslnniLineStatusLastStateDs | read-only | current | The last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line. |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.5 | ColumnhwAdslnniLineStatusLastStateUs | read-only | current | The last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line. |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.6 | ColumnhwAdslnniLineStatusAtur | read-only | current | Indicates current state (existing failures) of the ATU-R. This is a bit-map of possible conditions. |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.7 | ColumnhwAdslnniLineStatusAtuc | read-only | current | Indicates current state (existing failures) of the ATU-C. This is a bit-map of possible conditions. |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.8 | ColumnhwAdslnniLineStatusLnAttenDs | read-only | current | The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during diagnostics mode an… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.9 | ColumnhwAdslnniLineStatusLnAttenUs | read-only | current | The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during diagnostics mode an… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.10 | ColumnhwAdslnniLineStatusSigAttenDs | read-only | current | The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during Showtime. It ranges… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.11 | ColumnhwAdslnniLineStatusSigAttenUs | read-only | current | The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during Showtime. It ranges… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.12 | ColumnhwAdslnniLineStatusSnrMarginDs | read-only | current | Downstream SNR Margin is the maximum increase in dB of the noise power received at the ATU-R, such that the BER requirements are met for all downstream bearer … |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.13 | ColumnhwAdslnniLineStatusSnrMarginUs | read-only | current | Upstream SNR Margin is the maximum increase in dB of the noise power received at the ATU-C, such that the BER requirements are met for all downstream bearer ch… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.14 | ColumnhwAdslnniLineStatusAttainableRateDs | read-only | current | Maximum Attainable Data Rate Downstream. The maximum downstream net data rate currently attainable by the ATU-C transmitter and the ATU-R receiver, coded in bi… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.15 | ColumnhwAdslnniLineStatusAttainableRateUs | read-only | current | Maximum Attainable Data Rate Upstream. The maximum upstream net data rate currently attainable by the ATU-R transmitter and the ATU-C receiver, coded in bits/s… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.16 | ColumnhwAdslnniLineStatusActPsdDs | read-only | current | Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units o… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.17 | ColumnhwAdslnniLineStatusActPsdUs | read-only | current | Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 … |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.18 | ColumnhwAdslnniLineStatusActAtpDs | read-only | current | Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the ATU-C at the U-C reference point, at the instant of measurement… |
| 1.3.6.1.4.1.2011.6.143.1.1.3.1.19 | ColumnhwAdslnniLineStatusActAtpUs | read-only | current | Actual Aggregate Transmit Power Upstream. The total amount of transmit power delivered by the ATU-R at the U-R reference point, at the instant of measurement. … |
| 1.3.6.1.4.1.2011.6.143.1.1.4 | TablehwAdslnniChannelStatusTable | not-accessible | current | The table hwAdslnniChannelStatusTable contains status parameters of the ADSL2 channel. This table contains live data from equipment. The indexes of this table … |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1 | RowhwAdslnniChannelStatusEntry | not-accessible | current | The table hwAdslnniChannelStatusTable contains status parameters of the ADSL2 channel. This table contains live data from equipment. The indexes of this entry … |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.1 | ColumnhwadslnniChStatusUnit | not-accessible | current | The termination unit ATUC(1) or ATUR(2). |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.2 | ColumnhwadslnniChStatusChannelNum | read-only | current | Provides the bearer channel number associated with this row (i.e., the channel ifIndex). This enables determining the channel configuration profile and the cha… |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.3 | ColumnhwadslnniChStatusActDataRate | read-only | current | The actual net data rate that the bearer channel is operating at, if in L0 power management state. In L1 or L2 states, it relates to the previous L0 state. The… |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.4 | ColumnhwadslnniChStatusPrevDataRate | read-only | current | The previous net data rate that the bearer channel was operating at just before the latest rate change event. This could be a full or short initialization, fas… |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.5 | ColumnhwadslnniChStatusActDelay | read-only | current | The actual one-way interleaving delay introduced by the PMS-TC in the direction of the bearer channel, if in L0 power management state. In L1 or L2 states, it … |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.6 | ColumnhwadslnniChStatusAtmStatus | read-only | current | Indicates current state (existing failures) of the ADSL channel in case its Data Path is ATM. This is a bit-map of possible conditions. The various bit positio… |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.7 | ColumnhwadslnniChStatusPtmStatus | read-only | current | Indicates current state (existing failures) of the ADSL channel in case its Data Path is PTM. This is a bit-map of possible conditions. The various bit positio… |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.8 | ColumnhwadslnniChStatusINP | read-only | current | The actual impulse noise protection (INP) on the bearer channel in L0 state. |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.9 | ColumnhwadslnniChStatusRSRedundancy | read-only | current | The actual number of Reed-Solomon redundancy bytes per codeword used in the latency path in which the bearer channel is transported. The value is coded in byte… |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.10 | ColumnhwadslnniChStatusRSSymbols | read-only | current | The DMT Symbol number per codeword used in the latency path in which the bearer channel is transported. |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.11 | ColumnhwadslnniChStatusInterDepth | read-only | current | The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The value ranges from 1 to 4096 by step of 1. The va… |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.12 | ColumnhwadslnniChStatusSymbolLength | read-only | current | The actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. This value does not include trellis overhead. |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.13 | ColumnhwadslnniChStatusRSSize | read-only | current | The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. |
| 1.3.6.1.4.1.2011.6.143.1.1.5 | TablehwAdslnniSCStatusTable | not-accessible | current | The table hwadslnniSCStatusTable contains status parameters of the ADSL2 sub-carriers. The indexes of this table are ifIndex and hwAdslnniSCStatusDirection. |
| 1.3.6.1.4.1.2011.6.143.1.1.5.1 | RowhwAdslnniSCStatusEntry | not-accessible | current | The table hwadslnniSCStatusTable contains status parameters of the ADSL2 sub-carriers. The indexes of this entry are ifIndex and hwAdslnniSCStatusDirection. |
| 1.3.6.1.4.1.2011.6.143.1.1.5.1.1 | ColumnhwAdslnniSCStatusDirection | not-accessible | current | The direction of the sub-carrier is either upstream or downstream. |
| 1.3.6.1.4.1.2011.6.143.1.1.5.1.2 | ColumnhwadslnniSCStatusSnr | read-only | current | The SNR Margin per sub-carrier, expressing the ratio between the received signal power and received noise power per subscriber. It is an array of 512 octets, d… |
| 1.3.6.1.4.1.2011.6.143.1.1.5.1.3 | ColumnhwadslnniSCStatusBitsAlloc | read-only | current | The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. The number of utilized … |
| 1.3.6.1.4.1.2011.6.143.1.1.5.1.4 | ColumnhwadslnniSCStatusGainAlloc | read-only | current | The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. The number of utilized octet… |
| 1.3.6.1.4.1.2011.6.143.1.1.5.1.5 | ColumnhwadslnniSCStatusTssi | read-only | current | The transmit spectrum shaping (TSSi) breakpoints expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of values occupying 3 … |
| 1.3.6.1.4.1.2011.6.143.1.2 | NodehwAdslnniStatistics | |||
| 1.3.6.1.4.1.2011.6.143.1.2.1 | TablehwAdslnniStatisticsTable | not-accessible | current | The table hwAdslnniStatisticsTable contains statistics of the Adsl NNI. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.143.1.2.1.1 | RowhwAdslnniStatisticsEntry | not-accessible | current | The table hwAdslnniStatisticsTable contains statistics of the Adsl NNI. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.143.1.2.1.1.1 | ColumnhwAdslnniRxFrameCount | read-only | current | The ADSLNNI port receive OK frames. |
| 1.3.6.1.4.1.2011.6.143.1.2.1.1.2 | ColumnhwAdslnniRxBytesCount | read-only | current | The ADSLNNI port receive OK bytes. |
| 1.3.6.1.4.1.2011.6.143.1.2.1.1.3 | ColumnhwAdslnniTxFrameCount | read-only | current | The ADSLNNI port transmit OK frames. |
| 1.3.6.1.4.1.2011.6.143.1.2.1.1.4 | ColumnhwAdslnniTxBytesCount | read-only | current | The ADSLNNI port transmit OK bytes. |
| 1.3.6.1.4.1.2011.6.143.1.2.1.1.5 | ColumnhwAdslnniStatisticsClear | read-write | current | Clear the statistics of ADSL NNI, Options: 1. resetStat(1) -clear the statistics |
| 1.3.6.1.4.1.2011.6.143.1.3 | NodehwAdslnniPerStatis | |||
| 1.3.6.1.4.1.2011.6.143.1.3.1 | NodehwAdslnniPMLine | |||
| 1.3.6.1.4.1.2011.6.143.1.3.1.1 | TablehwAdslnniPMLineCurrTable | not-accessible | current | The table hwAdslnniPMLineCurrTable contains current Performance Monitoring results of ADSL2 lines. The indexes of this table are ifIndex and hwadslnniPMLCurrUn… |
| 1.3.6.1.4.1.2011.6.143.1.3.1.1.1 | RowhwAdslnniPMLineCurrEntry | not-accessible | current | The table hwAdslnniPMLineCurrTable contains current Performance Monitoring results of ADSL2 lines. The indexes of this entry are ifIndex and hwadslnniPMLCurrUn… |
| 1.3.6.1.4.1.2011.6.143.1.3.1.1.1.1 | ColumnhwadslnniPMLCurrUnit | not-accessible | current | The termination unit atuc(1) or atur(2). |
| 1.3.6.1.4.1.2011.6.143.1.3.1.1.1.2 | ColumnhwadslnniPMLCurrValidIntervals | read-only | current | Valid intervals. |
| 1.3.6.1.4.1.2011.6.143.1.3.1.1.1.3 | ColumnhwadslnniPMLCurrInvalidIntervals | read-only | current | Invalid intervals. |
| 1.3.6.1.4.1.2011.6.143.1.3.1.1.1.4 | ColumnhwadslnniPMLCurr15MTimeElapsed | read-only | current | Total elapsed seconds since this PM interval began. Note that the PM counters are not reset even when the XTU is reinitialized. They are reinitialized only whe… |
| 1.3.6.1.4.1.2011.6.143.1.3.1.1.1.5 | ColumnhwadslnniPMLCurr15MFecs | read-only | current | Count of seconds during this interval where there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibit… |
| 1.3.6.1.4.1.2011.6.143.1.3.1.1.1.6 | ColumnhwadslnniPMLCurr15MEs | read-only | current | Count of seconds during this interval where there was: ATU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 ATU-R: FEBE >= 1 fo… |
| 1.3.6.1.4.1.2011.6.143.1.3.1.1.1.7 | ColumnhwadslnniPMLCurr15MSes | read-only | current | Count of seconds during this interval where there was: ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 ATU-R: (FEBE su… |
| 1.3.6.1.4.1.2011.6.143.1.3.1.1.1.8 | ColumnhwadslnniPMLCurr15MLoss | read-only | current | Count of seconds during this interval where there was LOS (or LOS-FE for ATU-R). |
| 1.3.6.1.4.1.2011.6.143.1.3.1.1.1.9 | ColumnhwadslnniPMLCurr15MUas | read-only | current | Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the on… |
| 1.3.6.1.4.1.2011.6.143.1.3.1.2 | TablehwAdslnniPMLineCurrInitTable | not-accessible | current | The table hwAdslnniPMLineCurrInitTable contains current initialization counters of the ADSL2 line. The index of this table consists of an interface index, wher… |
| 1.3.6.1.4.1.2011.6.143.1.3.1.2.1 | RowhwAdslnniPMLineCurrInitEntry | not-accessible | current | The table hwAdslnniPMLineCurrInitTable contains current initialization counters of the ADSL2 line. The index of this table consists of an interface index, wher… |
| 1.3.6.1.4.1.2011.6.143.1.3.1.2.1.1 | ColumnhwAdslnniPMLCurrInit15MTimeElapsed | read-only | current | Total elapsed seconds since this PM interval began. Note that the PM counters are not reset even when the XTU is reinitialized. They are reinitialized only whe… |
| 1.3.6.1.4.1.2011.6.143.1.3.1.2.1.2 | ColumnhwAdslnniPMLCurrInit15MFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.143.1.3.1.2.1.3 | ColumnhwAdslnniPMLCurrInit15MFailedFullInits | read-only | current | Count of failed full initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.143.1.3.1.2.1.4 | ColumnhwAdslnniPMLCurrInit15MShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.143.1.3.1.2.1.5 | ColumnhwAdslnniPMLCurrInit15MFailedShortInits | read-only | current | Count of failed short initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.143.1.3.2 | NodehwAdslnniPMChannel | |||
| 1.3.6.1.4.1.2011.6.143.1.3.2.1 | TablehwAdslnniPMChCurrTable | not-accessible | current | The table hwadslnniPMChCurrTable contains current Performance Monitoring results of the ADSL2 channel. The indexes of this table are ifIndex and hwadslnniPMChC… |
| 1.3.6.1.4.1.2011.6.143.1.3.2.1.1 | RowhwAdslnniPMChCurrEntry | not-accessible | current | The table hwadslnniPMChCurrTable contains current Performance Monitoring results of the ADSL2 channel. The indexes of this entry are ifIndex and hwadslnniPMChC… |
| 1.3.6.1.4.1.2011.6.143.1.3.2.1.1.1 | ColumnhwadslnniPMChCurrUnit | not-accessible | current | The termination unit. |
| 1.3.6.1.4.1.2011.6.143.1.3.2.1.1.2 | ColumnhwadslnniPMChCurrValidIntervals | read-only | current | Valid intervals. |
| 1.3.6.1.4.1.2011.6.143.1.3.2.1.1.3 | ColumnhwadslnniPMChCurrInvalidIntervals | read-only | current | Invalid intervals. |
| 1.3.6.1.4.1.2011.6.143.1.3.2.1.1.4 | ColumnhwadslnniPMChCurr15MTimeElapsed | read-only | current | Total elapsed seconds since this PM interval began. Note that the PM counters are not reset even when the XTU is reinitialized. They are reinitialized only whe… |
| 1.3.6.1.4.1.2011.6.143.1.3.2.1.1.5 | ColumnhwadslnniPMChCurr15MCodingViolations | read-only | current | Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov… |
| 1.3.6.1.4.1.2011.6.143.1.3.2.1.1.6 | ColumnhwadslnniPMChCurr15MCorrectedBlocks | read-only | current | Count of FEC (FFEC for ATU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If … |