HUAWEI-ATM-OAM-MIB
59 objects
huawei hwAtmOam mib.
Imported Objects
| ATM-TC-MIB | AtmVcIdentifier AtmVpIdentifier |
| HUAWEI-MIB | huaweiUtility |
| IF-MIB | ifIndex |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.11 | IdentityhwAtmOam | huawei hwAtmOam mib. | ||
| 1.3.6.1.4.1.2011.6.11.1 | NodehwAtmOamMibObjects | |||
| 1.3.6.1.4.1.2011.6.11.1.1 | TablehwAtmOamPointTable | not-accessible | current | Table of OAM point. functions Decripted as: |
| 1.3.6.1.4.1.2011.6.11.1.1.1 | RowhwAtmOamPointEntry | not-accessible | current | OAM point table entry. |
| 1.3.6.1.4.1.2011.6.11.1.1.1.1 | ColumnhwAtmOamPointVPI | accessible-for-notify | current | vpi. |
| 1.3.6.1.4.1.2011.6.11.1.1.1.2 | ColumnhwAtmOamPointVCI | accessible-for-notify | current | vci. if vci = 0, means that this is a F4 point |
| 1.3.6.1.4.1.2011.6.11.1.1.1.3 | ColumnhwAtmOamPointType | read-create | current | OAM point type. e2e(1) : e-t-e end point. segment(2) : segment end point. e2e-inter(3) : connection point within two e-t-e points. segment-inter(4): connection… |
| 1.3.6.1.4.1.2011.6.11.1.1.1.4 | ColumnhwAtmOamPointAdminStatus | read-create | current | up(1) means enable; down(2) means disable. |
| 1.3.6.1.4.1.2011.6.11.1.1.1.5 | ColumnhwAtmOamAlarmType | read-only | current | OAM point alarm type. noAlarm(0) : no alarm. receiveAisCell(0x01): received AIS cell. receiveRdiCell(0x02): received RDI cell. loc(0x04) : lost of continuty(CC… |
| 1.3.6.1.4.1.2011.6.11.1.1.1.6 | ColumnhwAtmOamCfgFlag | read-only | current | OAM point configure recovering flag. running(1) : OAM point in running stage. recovering(2): OAM point in recovering stage. |
| 1.3.6.1.4.1.2011.6.11.1.1.1.7 | ColumnhwAtmOamFmStatus | read-only | current | OAM point FM status. |
| 1.3.6.1.4.1.2011.6.11.1.1.1.8 | ColumnhwAtmOamFmStatusDateTime | read-only | current | The time that the OAM point entered this FM status. |
| 1.3.6.1.4.1.2011.6.11.1.1.1.9 | ColumnhwAtmOamPointRowStatus | read-create | current | OAM point table row status. |
| 1.3.6.1.4.1.2011.6.11.1.2 | TablehwAtmOamCcTable | not-accessible | current | Table of CC end point. see the define of the OAM point table . |
| 1.3.6.1.4.1.2011.6.11.1.2.1 | RowhwAtmOamCcEntry | not-accessible | current | OAM CC end point table entry. |
| 1.3.6.1.4.1.2011.6.11.1.2.1.1 | ColumnhwAtmOamCcVPI | not-accessible | current | vpi. |
| 1.3.6.1.4.1.2011.6.11.1.2.1.2 | ColumnhwAtmOamCcVCI | not-accessible | current | vci. if vci = 0, means that this is a F4 point |
| 1.3.6.1.4.1.2011.6.11.1.2.1.3 | ColumnhwAtmOamCcDirection | read-create | current | OAM CC direction. |
| 1.3.6.1.4.1.2011.6.11.1.2.1.4 | ColumnhwAtmOamConfType | read-create | current | OAM CC configure type,only valid up or down operating . autoConfig(1) : active/deactive CC by A/D protocol. manualConfig(2): active/deactive CC by TMN entirely… |
| 1.3.6.1.4.1.2011.6.11.1.2.1.5 | ColumnhwAtmOamCcAdminStatus | read-create | current | up(1) means enable; down(2) means disable. |
| 1.3.6.1.4.1.2011.6.11.1.2.1.6 | ColumnhwAtmOamCcRowStatus | read-create | current | OAM CC end point table row status. |
| 1.3.6.1.4.1.2011.6.11.1.3 | TablehwAtmOamLbTable | not-accessible | current | Table of loopback. |
| 1.3.6.1.4.1.2011.6.11.1.3.1 | RowhwAtmOamLbEntry | not-accessible | current | OAM loopback table entry. This talbe only support 'set' operation. |
| 1.3.6.1.4.1.2011.6.11.1.3.1.1 | ColumnhwAtmOamLbVPI | accessible-for-notify | current | vpi. |
| 1.3.6.1.4.1.2011.6.11.1.3.1.2 | ColumnhwAtmOamLbVCI | accessible-for-notify | current | vci. if vci = 0, means that this is a F4 point. |
| 1.3.6.1.4.1.2011.6.11.1.3.1.3 | ColumnhwAtmOamLbType | read-create | current | OAM loopback type. e2e(1) : end to end loopback. segment(2) : segment loopback. llid(3) : specified llid loopback. no-loopback(4): stopping loopback. |
| 1.3.6.1.4.1.2011.6.11.1.3.1.4 | ColumnhwAtmOamLbPointLLID | read-create | current | Specify loopback destination LLID, which valid only hwAtmOamLbType being set llid(3) . |
| 1.3.6.1.4.1.2011.6.11.1.3.1.5 | ColumnhwAtmOamLbNumber | read-create | current | Specify the number of the cells loopbacked . |
| 1.3.6.1.4.1.2011.6.11.1.3.1.6 | ColumnhwAtmOamLbInterval | read-create | current | Specify the interval between two insert operation. |
| 1.3.6.1.4.1.2011.6.11.1.4 | TablehwAtmOamLlidTable | not-accessible | current | Table of LLID. |
| 1.3.6.1.4.1.2011.6.11.1.4.1 | RowhwAtmOamLlidEntry | not-accessible | current | OAM LLID table entry. |
| 1.3.6.1.4.1.2011.6.11.1.4.1.1 | ColumnhwAtmOamLlidPointLLID | read-write | current | local interface LLID. |
| 1.3.6.1.4.1.2011.6.11.1.5 | TablehwAtmOamInsertTable | not-accessible | current | Table of Insert. |
| 1.3.6.1.4.1.2011.6.11.1.5.1 | RowhwAtmOamInsertEntry | not-accessible | current | OAM Insert table entry. This talbe only support 'set' operation. |
| 1.3.6.1.4.1.2011.6.11.1.5.1.1 | ColumnhwAtmOamInsertVPI | not-accessible | current | vpi. |
| 1.3.6.1.4.1.2011.6.11.1.5.1.2 | ColumnhwAtmOamInsertVCI | not-accessible | current | vci. if vci = 0, means that this is a F4 point. |
| 1.3.6.1.4.1.2011.6.11.1.5.1.3 | ColumnhwAtmOamInsertOperation | read-create | current | specify the operation(begin or stop) of the insertion . |
| 1.3.6.1.4.1.2011.6.11.1.5.1.4 | ColumnhwAtmOamInsertSegment | read-create | current | specify the segment type. |
| 1.3.6.1.4.1.2011.6.11.1.5.1.5 | ColumnhwAtmOamInsertCellType | read-create | current | specify the type of the inserted cell . |
| 1.3.6.1.4.1.2011.6.11.2 | NodehwAtmOamTraps | |||
| 1.3.6.1.4.1.2011.6.11.2.1 | NodehwAtmOamTrapVarBindOids | |||
| 1.3.6.1.4.1.2011.6.11.2.1.1 | NodehwAtmOamGeneralVarBindOids | |||
| 1.3.6.1.4.1.2011.6.11.2.1.1.1 | ScalarhwAtmOamVarBindLoopbackResult | accessible-for-notify | current | Loopback result: success(1) timeout(2) |
| 1.3.6.1.4.1.2011.6.11.2.1.2 | NodehwAtmOamVarBindOidsReason | |||
| 1.3.6.1.4.1.2011.6.11.2.1.2.1 | ScalarhwAtmOamAisReason | accessible-for-notify | current | OAM operation terminate reason: enumFirst: explain: ATM connection be deleted resolving method:None enumSecond: explain: Board fail resolving method:None |
| 1.3.6.1.4.1.2011.6.11.2.1.2.2 | ScalarhwAtmOamOperTerminateReason | accessible-for-notify | current | OAM operation terminate reason: enumFirst: explain: ATM connection be deleted resolving method:None enumSecond: explain: Board fail resolving method:None |
| 1.3.6.1.4.1.2011.6.11.2.2 | NodehwAtmOamAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.11.2.2.0 | NodehwAtmOamAlarmTrapsOids | |||
| 1.3.6.1.4.1.2011.6.11.2.2.0.1 | NotificationhwAtmOamAlarmAis | current | alarm description:AIS alarm explain: AIS cell recieved from upstream. resolving method:Check if there is some defect in the upstream | |
| 1.3.6.1.4.1.2011.6.11.2.2.0.2 | NotificationhwAtmOamAlarmAisRestore | current | alarm description:AIS alarm restore explain: There is no AIS cell recieved from upstream within a time interval of 2.5 seconds, with a margin of 0.5 seconds, r… | |
| 1.3.6.1.4.1.2011.6.11.2.2.0.3 | NotificationhwAtmOamAlarmRdi | current | alarm description:RDI alarm explain: RDI cell recieved from downstream. resolving method:Check if there is some defect in the downstream. | |
| 1.3.6.1.4.1.2011.6.11.2.2.0.4 | NotificationhwAtmOamAlarmRdiRestore | current | alarm description:RDI alarm restore explain: There is no RDI cell recieved from downstream within a time interval of 2.5 seconds, with a margin of 0.5 seconds,… | |
| 1.3.6.1.4.1.2011.6.11.2.2.0.5 | NotificationhwAtmOamAlarmLoc | current | alarm description:LOC alarm explain: CC sink can not recieve CC cells from source within a time interval of 3.5 seconds,with a margin of 0.5 seconds;Or physica… | |
| 1.3.6.1.4.1.2011.6.11.2.2.0.6 | NotificationhwAtmOamAlarmLocRestore | current | alarm description:LOC alarm restore explain: CC cells can be recieved from CC source.Or physical fault is restored. resolving method:NA | |
| 1.3.6.1.4.1.2011.6.11.2.2.0.7 | NotificationhwAtmOamAlarmLbTerminate | current | alarm description:LB abort alarm explain:1.The corresponding connection is deleted 2.There is some fault in the corresponding board. resolving method:Until the… | |
| 1.3.6.1.4.1.2011.6.11.2.2.0.8 | NotificationhwAtmOamAlarmInsTerminate | current | alarm description:Insertion abort alarm explain:1.The corresponding connection is deleted 2.There is some fault in the corresponding board. resolving method:Un… | |
| 1.3.6.1.4.1.2011.6.11.2.3 | NodehwAtmOamGeneralTraps | |||
| 1.3.6.1.4.1.2011.6.11.2.3.0 | NodehwAtmOamGeneralTrapsOids | |||
| 1.3.6.1.4.1.2011.6.11.2.3.0.1 | NotificationhwAtmOamTrapLoopbackReport | current | General trap description: Used to send loopback result of LB cell, success(1) or timeout(2). |