HUAWEI-BTEST-MIB
122 objects
This MIB is used for defining Huawei's BTEST MIB objects,which is used for Broad test.
Imported Objects
| HUAWEI-COMMTEST-MIB | hwTestGroupNo |
| HUAWEI-DEVICE-MIB | hwFrameIndex hwSlotIndex |
| HUAWEI-MIB | huaweiUtility |
| HUAWEI-TC-MIB | HWPortType |
| IF-MIB | ifIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.21 | NodehwTest | |||
| 1.3.6.1.4.1.2011.6.21.3 | IdentityhwBTest | This MIB is used for defining Huawei's BTEST MIB objects,which is used for Broad test. | ||
| 1.3.6.1.4.1.2011.6.21.3.1 | NodehwBTestMib | |||
| 1.3.6.1.4.1.2011.6.21.3.1.1 | NodehwBTestMIBObjects | |||
| 1.3.6.1.4.1.2011.6.21.3.1.1.1 | TablehwBTSSxDslLineCfgTable | not-accessible | current | The hwBTSSxDslLineCfgTable table describes xDSL line configuration. This table is used for bandwidth test. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.1.1 | RowhwBTSSxDslLineCfgEntry | not-accessible | current | The hwBTSSxDslLineCfgTable table describes xDSL line configuration. This table is used for bandwidth test. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.1.1.1 | ColumnhwBTSSxDslLineOverlapType | read-write | current | Overlap mode of xDSL with PSTN line. Options: 1. overLap(1) - xDSL overlap with POTS line 2. direct(2) - There is no pots line, no splitter, no phone 3. unknow… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.2 | TablehwBTSSCoTestTable | not-accessible | current | xDSL central office emulational measurement table.The table is used for xDSL central emulational measurement. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.2.1 | RowhwBTSSCoTestEntry | not-accessible | current | xDSL central office emulational measurement table.The table is used for xDSL central emulational measurement. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.2.1.1 | ColumnhwBTSSCoOperType | read-write | current | CO emulational operation type. Options: 1. stop(1) - Stop CO emulational 2. start(2) - Start CO emulational |
| 1.3.6.1.4.1.2011.6.21.3.1.1.2.1.2 | ColumnhwBTSSCoTestResult | accessible-for-notify | current | CO emulational test result. Options: 1. normal(1) - The test of CO emulational is successful 2. testfail(2) - Fail in test of CO emulational |
| 1.3.6.1.4.1.2011.6.21.3.1.1.2.1.3 | ColumnhwBTSSCoTestBusyFlag | read-write | current | CO force test flag Options: 1. busyNoTest(1) - No test on busy 2. busyTest(2) - Test on busy 3. busystrenTest(3) - Forced test on busy |
| 1.3.6.1.4.1.2011.6.21.3.1.1.17 | TablehwBTSSAuxPortCfgTable | not-accessible | current | Configuration table of the broadband test auxiliary port This table is used to configure a certain type of emulation port required in the CO emulation test. Th… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.17.1 | RowhwBTSSAuxPortCfgEntry | not-accessible | current | Configuration table of the broadband test auxiliary port This table is used to configure a certain type of emulation port required in the CO emulation test. Th… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.17.1.1 | ColumnhwBTSSAuxPortType | not-accessible | current | Assistance port type of BTSS. Options: 1. adsl(1) - Assistance port type of BTSS is adsl 2. vdsl(2) - Assistance port type of BTSS is vdsl 3. gshdsl(3) - Assis… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.17.1.2 | ColumnhwBTSSAuxPortIfIndex | read-create | current | Assistance port ifIndex of BTSS. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.17.1.3 | ColumnhwBTSSAuxPortRowStatus | read-create | current | Row status(add(4),delete(6)). |
| 1.3.6.1.4.1.2011.6.21.3.1.1.18 | TablehwBTSSTestedPortOperTable | not-accessible | current | This table describes operation for tested port. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.18.1 | RowhwBTSSTestedPortOperEntry | not-accessible | current | This table describes operation for tested port. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.18.1.1 | ColumnhwBTSSTestedPortOperType | read-write | current | Operation type of BTSS tested port. Options: 1. capture(1) - Capture 2. release(2) - Release 3. startmonitor(3) - Start monitor 4. stopmonitor(4) - Stop monito… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.18.1.2 | ColumnhwBTSSTestedPortOperMode | read-write | current | Operation mode of BTSS tested port. Options: 1. inline(1) - BTSS tested port in test 2. outline(2) - BTSS tested port out test 3. monitor(3) - Monitoring BTSS … |
| 1.3.6.1.4.1.2011.6.21.3.1.1.18.1.3 | ColumnhwBTSSTestedPortOperResult | accessible-for-notify | current | Test result of BTSS tested port. Options: 1. normal(1) - The test of BTSS tested port is successful 2. fail(2) - Fail in test of BTSS tested port 3. timeout(4)… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.18.1.4 | ColumnhwBTSSTestedPortTestBusyFlag | read-write | current | Tested port force test. Options: 1. busyNoTest(1) - No test on busy 2. busyTest(2) - Test on busy 3. busystrenTest(3) - Forced test on busy |
| 1.3.6.1.4.1.2011.6.21.3.1.1.18.1.5 | ColumnhwBTSSTestedPortTestPOTSFlag | read-write | current | Tested port POTS service flag Options: 1. noCutPOTS(1) - No cut off POTS 2. busyNoTest(2) - No test on POTS busy (Cut off POTS) 3. busyTest(3) - Test on POTS b… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.19 | TablehwBTSSCqtTransTestTable | not-accessible | current | This table describes CQT test by transparent command. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.19.1 | RowhwBTSSCqtTransTestEntry | not-accessible | current | This table describes CQT test by transparent command. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.19.1.1 | ColumnhwBTSSCqtTransTestOperType | read-write | current | CQT transparent Operation type Options: 1. stop(1) - Stop CQT transparent test 2. start(2) - Start CQT transparent test |
| 1.3.6.1.4.1.2011.6.21.3.1.1.19.1.2 | ColumnhwBTSSCqtTransTestCRCMode | read-write | current | CRC Operation type of CQT transparent. Options: 1. disable(1) - Disable CQT transparent 2. enable(2) - Enable CQT transparent Default: disable(1) |
| 1.3.6.1.4.1.2011.6.21.3.1.1.19.1.3 | ColumnhwBTSSCqtTransTestOperResult | accessible-for-notify | current | CQT transparent Operation result. Options: 1. normal(1) - The CQT transparent test is successful 2. fail(2) - The CQT transparent test fails 3. abort(3) - The … |
| 1.3.6.1.4.1.2011.6.21.3.1.1.19.1.4 | ColumnhwBTSSCqtTransTestTxCmd | read-write | current | Sending command string in TL1 format. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.19.1.5 | ColumnhwBTSSCqtTransTestResultNo | accessible-for-notify | current | Test result No. Range: 1-255 |
| 1.3.6.1.4.1.2011.6.21.3.1.1.19.1.6 | ColumnhwBTSSCqtTransTestResultLastFlag | accessible-for-notify | current | Last package flag for test result. Options: 1. false(0) - This is not the last package 2. true(1) - The last package |
| 1.3.6.1.4.1.2011.6.21.3.1.1.19.1.7 | ColumnhwBTSSCqtTransTestResult | accessible-for-notify | current | CQT transparent Test result. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.20 | TablehwBTSSMultiFrameMiscOperTable | not-accessible | current | This table describes test relatived operation for multi-frame. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.20.1 | RowhwBTSSMultiFrameMiscOperEntry | not-accessible | current | This table describes test relatived operation for multi-frame. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.20.1.1 | ColumnhwBTSSMultiFrameMiscCleanTest | read-write | current | Clean current test on specified frame. Options: 1. start(1) - Start clean current test |
| 1.3.6.1.4.1.2011.6.21.3.1.1.20.1.2 | ColumnhwBTSSMultiFrameMiscTestedFrame | read-write | current | Tested frame of BTSS multi-frame. Default: 0 |
| 1.3.6.1.4.1.2011.6.21.3.1.1.20.1.3 | ColumnhwBTSSMultiFrameMiscTestedPortType | read-write | current | Tested port type of BTSS multi-frame. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.20.1.4 | ColumnhwBTSSMultiFrameMiscTestedLineType | read-write | current | Tested line type of BTSS multi-frame. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21 | TablehwBTSSAdslSeltTestTable | not-accessible | current | This table describes selt test for adsl2+. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1 | RowhwBTSSAdslSeltTestEntry | not-accessible | current | This table describes selt test for adsl2+. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.1 | ColumnhwBTSSAdslSeltTestOperType | read-write | current | Selt test operation type. Options: 1. stop(1) - Stop selt test of BTSS 2. start(2) - Start selt test of BTSS 3. invalid(-1) - No operation |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.2 | ColumnhwBTSSAdslSeltTestOperResult | accessible-for-notify | current | Selt test operation result. Options: 1. normal(1) - Selt test of BTSS is successful 2. fail(2) - Fail in selt test of BTSS 3. abort(3) - Selt test of BTSS abor… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.3 | ColumnhwBTSSAdslSeltTestResultNo | accessible-for-notify | current | Selt test result serial number. Range: 1-255 |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.4 | ColumnhwBTSSAdslSeltTestResultLastFlag | accessible-for-notify | current | Last package flag of test. Options: 1. false(0) - This is not the last package 2. true(1) - The last package |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.5 | ColumnhwBTSSAdslSeltTestResult | accessible-for-notify | current | Selt test result data. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.6 | ColumnhwBTSSAdslSeltTestParamLoopLength | read-only | current | Selt test parameter Loop Length. The invalid value is -1. If no SELT is performed, no SELT data is generated because the SELT is incomplete, or no SELT data ca… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.7 | ColumnhwBTSSAdslSeltTestParamLoopTermin | read-only | current | Selt test parameter Loop Termination state. Options: 1. open(0) - Indicates that the line terminal is started 2. short(1) - Indicates that the line terminal is… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.8 | ColumnhwBTSSAdslSeltTestParamLoopGauge | read-write | current | Selt test parameter Loop Gauge. Options: 1. greater26awg(1) - Indicates that the line gauge is greater than 26 2. equal26awg(2) - Indicates that the line gauge… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.9 | ColumnhwBTSSAdslSeltTestParamUpShnCap | read-only | current | Selt test parameter Upstream Shannon Capacity. The invalid value is -1. If no SELT is performed, no SELT data is generated because the SELT is incomplete, or n… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.10 | ColumnhwBTSSAdslSeltTestParamDwnShnCap | read-only | current | Selt test parameter Downstream Shannon Capacity. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.11 | ColumnhwBTSSAdslSeltTestParamInbandNoise | read-only | current | Selt test parameter Inband Noise 512 values that indicate inband noise in dBm/Hz, covering ADSL, ADSL2, and ADSL2+ bands, from 0 to 2.2 MHz. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.12 | ColumnhwBTSSAdslSeltTestParamTerminResp | read-only | current | Selt test parameter Termination Response 180 values that indicate termination response magnitude from 0 to 18 kft. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.13 | ColumnhwBTSSAdslSeltTestParamUpMgnAtRate | read-only | current | Selt test parameter Upstream Ratevs. Margin. This value is a measure of the quality of your upstream data signal relative to the noise on the line. Hundreds of… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.14 | ColumnhwBTSSAdslSeltTestParamDwnMgnAtRate | read-only | current | Selt test parameter Downstream Rate vs. Margin. This value is a measure of the quality of your downstream data signal relative to the noise on the line. Hundre… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.15 | ColumnhwBTSSAdslSeltTestParamUpRateAtMgn | read-only | current | Selt test parameter Upstream Margin vs. Rate. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.16 | ColumnhwBTSSAdslSeltTestParamDwnRateAtMgn | read-only | current | Selt test parameter Downstream Margin vs. Rate. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.17 | ColumnhwBTSSAdslSeltTestParamLoopAttenAtFreq | read-only | current | Selt test parameter loop attenuation versus frequency. Every four bytes constitute the result of a tone. This information may be plotted with the bit frequency… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.18 | ColumnhwBTSSAdslSeltTestParamUnCalibLineScale | read-only | current | The uncalibrated echo response, UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i … |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.19 | ColumnhwBTSSAdslSeltTestParamUnCalibEchoRespReal | read-only | current | The uncalibrated echo response, UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i … |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.20 | ColumnhwBTSSAdslSeltTestParamUnCalibEchoRespImg | read-only | current | The uncalibrated echo response, UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i … |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.21 | ColumnhwBTSSAdslSeltTestParamCalibLineScale | read-only | current | The scale factor of calibrated echo response shall be coded as a 16 bit unsigned integer. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.22 | ColumnhwBTSSAdslSeltTestParamCalibEchoRespReal | read-only | current | The calibrated echo response UER(i* f), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i is the sub… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.23 | ColumnhwBTSSAdslSeltTestParamCalibEchoRespImg | read-only | current | The calibrated echo response UER(i* f), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i is the sub… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.24 | ColumnhwBTSSAdslSeltTestParamVarUerC | read-only | current | The relative variance of the uncalibrated echo response REL_VAR_UER(i* UER_G *Df) shall be represented as an 8-bit unsigned integer v(i), where i is the subcar… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.25 | ColumnhwBTSSAdslSeltTestParamUerMmdC | read-write | current | This parameter is the maximum allowed time for SELT uncalibrated echo response measurement, between the time of the start command written by the SELT-PMD-ME, a… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.26 | ColumnhwBTSSAdslSeltTestParamQlnMmdC | read-write | current | This parameter is the maximum allowed time for SELT quiet line noise measurement, between the time of the start command written by the SELT-PMD-ME, and the tim… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.27 | ColumnhwBTSSAdslSeltTestParamUmeC | read-write | current | This parameter is a binary variable. Options: 1.enable(1) - Enable UER capture switch 2.disable(2) - Disable UER capture switch 3.invalid(-1) - Invalid value |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.28 | ColumnhwBTSSAdslSeltTestParamQmeC | read-write | current | This parameter is a binary variable. Options: 1.enable(1) - Enable QLN capture switch 2.disable(2) - Disable QLN capture switch 3.invalid(-1) - Invalid value |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.29 | ColumnhwBTSSAdslSeltTestParamUerStatus | read-only | current | UerStatus. Options: 1.off(1) - The status is off. 2.running(2) - The status is running. 3.completed(3) - The status is completed. 4.failed(4) - The status is f… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.30 | ColumnhwBTSSAdslSeltTestParamQlnStatus | read-only | current | QlnStatus. Options: 1.off(1) - The status is off. 2.running(2) - The status is running. 3.completed(3) - The status is completed. 4.failed(4) - The status is f… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.31 | ColumnhwBTSSAdslSeltTestParamCalcEnable | read-write | current | The status of calculation switch. Options: 1. enable(1) - Enable calculation switch 2. disable(2) - Disable calculation switch 3. invalid(-1) - Invalid value D… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.65535 | ColumnhwBTSSAdslSeltTestParamAttnAt180KHZ | read-only | current | Selt test parameter attenuation at 180KHZ. It ranges from -1100 to 0 units of 0.1dB(physical values are -110 to 0 dB). The invalid value is -1. If no SELT is p… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.65536 | ColumnhwBTSSAdslSeltTestParamAttnAt300KHZ | read-only | current | Selt test parameter attenuation at 300KHZ. It ranges from -1100 to 0 units of 0.1dB(physical values are -110 to 0 dB). The invalid value is -1. If no SELT is p… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.21.1.65537 | ColumnhwBTSSAdslSeltTestParamQSPsdValue | read-only | current | The SELT quiet line noise provides the quiet line noise PSD as measured by the SELT-PMD function (see clause A.1.1.2) for each sub-carrier frequency i * SELTQL… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.22 | TablehwBTSSAdslDeltTestTable | not-accessible | current | This table describes Delt test for adsl2+. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.22.1 | RowhwBTSSAdslDeltTestEntry | not-accessible | current | This table describes Delt test for adsl2+. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.22.1.1 | ColumnhwBTSSAdslDeltTestOperType | read-write | current | Delt test operation type. Options: 1. stop(1) - Delt test stop 2. start(2) - Start delt test 3. invalid(-1) - No operation |
| 1.3.6.1.4.1.2011.6.21.3.1.1.22.1.2 | ColumnhwBTSSAdslDeltTestOperResult | accessible-for-notify | current | Delt test operation result. Options: 1. normal(1) - Delt test is normal 2. fail(2) - Fail in delt test 3. abort(3) - Delt test aborts |
| 1.3.6.1.4.1.2011.6.21.3.1.1.22.1.3 | ColumnhwBTSSAdslDeltTestResultNo | accessible-for-notify | current | Delt test result serial number. Range: 1-255 |
| 1.3.6.1.4.1.2011.6.21.3.1.1.22.1.4 | ColumnhwBTSSAdslDeltTestResultLastFlag | accessible-for-notify | current | Last package flag for test result. Options: 1. false(0) - This is not the last package 2. true(1) - The last package |
| 1.3.6.1.4.1.2011.6.21.3.1.1.22.1.5 | ColumnhwBTSSAdslDeltTestResult | accessible-for-notify | current | Delt test result data. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.23 | TablehwBTSSLoopLineToneOprTable | not-accessible | current | The table hwBTSSLoopLineToneOprTable is used to Loop Line Tone. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.23.1 | RowhwBTSSLoopLineToneOprEntry | not-accessible | current | The table hwBTSSLoopLineToneOprTable is used to Loop Line Tone. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.23.1.1 | ColumnhwBTSSLoopLineToneOprType | read-write | current | Operation type of BTSS loop line tone Options: 1. check(1) - Indicates that checking the signal tone is started 2. send(2) - Indicates that sending the signal … |
| 1.3.6.1.4.1.2011.6.21.3.1.1.23.1.2 | ColumnhwBTSSLoopLineToneIntensity | read-write | current | Tone intensity of BTSS loop line tone. Options: 1. fivedB(1) - Tone intensity of BTSS is five dB 2. tendB(2) - Tone intensity of BTSS is ten dB 3. fifteendB(3)… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.23.1.3 | ColumnhwBTSSLoopLineToneBusyFlag | read-write | current | Tested port force test of BTSS loop line tone. Options: 1. busyNoTest(1) - No test on busy 2. busyTest(2) - Test on busy 3. busystrenTest(3) - Forced test on b… |
| 1.3.6.1.4.1.2011.6.21.3.1.1.23.1.4 | ColumnhwBTSSLoopLineToneResult | read-only | current | Operate result of BTSS loop line tone. Options: 1. succeed(1) - The test of BTSS loop line tone is successful 2. failed(2) - Failed in BTSS loop line tone test |
| 1.3.6.1.4.1.2011.6.21.3.1.1.24 | TablehwBTSSSeltAuxPortCfgTable | not-accessible | current | This table sets assistance port for SELT. The index of this table is hwBTSSSeltAuxedPortIfIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.24.1 | RowhwBTSSSeltAuxPortCfgEntry | not-accessible | current | This table sets assistance port for SELT. The index of this entry is hwBTSSSeltAuxedPortIfIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.24.1.1 | ColumnhwBTSSSeltAuxedPortIfIndex | not-accessible | current | The ifindex of the Auxed port. If there is only one global Auxed port, the value is 65535. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.24.1.2 | ColumnhwBTSSSeltAuxPortIfIndex | read-write | current | Assistance port ifIndex |
| 1.3.6.1.4.1.2011.6.21.3.1.1.24.1.3 | ColumnhwBTSSSeltAuxPortRowStatus | read-create | current | Row status(add(4), delete(6)) of the Aux port. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.25 | TablehwBTSSAdslSeltLevelTable | not-accessible | current | This table supports the configuration of adsl selt level. The indexes of this table are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.25.1 | RowhwBTSSAdslSeltLevelEntry | not-accessible | current | This table supports the configuration of adsl selt level. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.25.1.1 | ColumnhwBTSSAdslSeltLevel | read-write | current | The level of adsl SELT: 1 Level0; 2 Level1; 3 Level2; 4 Level3. A special value of -1 indicates the level of adsl SELT is invalid. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.26 | TablehwBTSSAdslSeltCalibrationTable | not-accessible | current | This table describes calibration data of selt test. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.26.1 | RowhwBTSSAdslSeltCalibrationEntry | not-accessible | current | This table describes calibration data of selt test. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.26.1.1 | ColumnhwBTSSAdslSeltCalibrationInvVendorId | read-only | current | It consists of 8 binary octets, including a provider code. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.26.1.2 | ColumnhwBTSSAdslSeltCalibrationDataSegment1 | read-only | current | The part 1 of selt calibration data. The unit of selt calibration data is 0.00001. |
| 1.3.6.1.4.1.2011.6.21.3.1.1.26.1.3 | ColumnhwBTSSAdslSeltCalibrationDataSegment2 | read-only | current | The part 2 of selt calibration data. The unit of selt calibration data is 0.00001. |
| 1.3.6.1.4.1.2011.6.21.3.2 | NodehwBTestTraps | |||
| 1.3.6.1.4.1.2011.6.21.3.2.1 | NodehwBTestTrapVbOids | |||
| 1.3.6.1.4.1.2011.6.21.3.2.1.2 | NodehwBTestVbOidsReason | |||
| 1.3.6.1.4.1.2011.6.21.3.2.1.2.1 | ScalarhwBTSSCqtOfflineReason | accessible-for-notify | current | Cqt module offline reason. Options: 1. commFail(1) - CQT module communication fail. Resolving method:Check CQT module running normal 2. userReset(2) - User res… |
| 1.3.6.1.4.1.2011.6.21.3.2.1.2.2 | ScalarhwBTSSRequestID | accessible-for-notify | current | NMS request ID. |
| 1.3.6.1.4.1.2011.6.21.3.2.2 | NodehwBTestAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.21.3.2.2.0 | NodehwBTestAlarmTrapsOIDs | |||
| 1.3.6.1.4.1.2011.6.21.3.2.2.0.1 | NotificationhwBTSSCqtOnlineTrap | current | CQT unit online status trap. This notification indicates alarm when CQT unit online. enumFirst: explain: CQT module communication OK resolving method:NA. | |
| 1.3.6.1.4.1.2011.6.21.3.2.2.0.2 | NotificationhwBTSSCqtOfflineTrap | current | CQT unit offline status trap. This notification indicates alarm when CQT unit offline. | |
| 1.3.6.1.4.1.2011.6.21.3.2.3 | NodehwBTestGeneralTraps | |||
| 1.3.6.1.4.1.2011.6.21.3.2.3.0 | NodehwBTestGeneralTrapsOIDs | |||
| 1.3.6.1.4.1.2011.6.21.3.2.3.0.1 | NotificationhwBTSSCoStartTrap | current | Start Co test trap. This notification indicates alarm when starting Co test. | |
| 1.3.6.1.4.1.2011.6.21.3.2.3.0.2 | NotificationhwBTSSCoStopTrap | current | Stop Co test trap. This notification indicates alarm when stopping Co test. | |
| 1.3.6.1.4.1.2011.6.21.3.2.3.0.3 | NotificationhwBTSSTestedPortOperTrap | current | Tested port operation trap. This notification indicates alarm when tested port operation. | |
| 1.3.6.1.4.1.2011.6.21.3.2.3.0.4 | NotificationhwBTSSCqtTransTestOperResultTrap | current | Cqt transparent test trap. This notification indicates alarm when starting or stoping Cqt transparent test. | |
| 1.3.6.1.4.1.2011.6.21.3.2.3.0.5 | NotificationhwBTSSCqtTransTestResultTrap | current | Cqt transparent test trap. This notification indicates alarm when reporting the result after Cqt transparent test. | |
| 1.3.6.1.4.1.2011.6.21.3.2.3.0.6 | NotificationhwBTSSLoopLineToneOperTrap | current | loop line tone test result trap: 1:hwBTSSLoopLineToneResult. This notification indicates alarm when reporting the test result of Loop Line Tone. | |
| 1.3.6.1.4.1.2011.6.21.3.2.3.0.7 | NotificationhwBTSSCaptureTrap | current | BTSS capture trap. This trap is sent when BTSS capture result reported. | |
| 1.3.6.1.4.1.2011.6.21.3.2.3.0.8 | NotificationhwBTSSDeltResultDataTrap | current | BTSS delt result trap. This notification indicates alarm when captures result data of BTSS delt test. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CqtQualitativeResultString | OCTET STRING (SIZE (0..255)) | current | This string to contain qualitative result. |
| HWBTSSxDslLineOverLap | INTEGER { overLap(1), direct(2), unknown(3) } | current | Set overlap mode of xDSL with PSTN line. Options: 1. overLap(1) - xDSL overlap with POTS line 2. direct(2) - There is no pots line, no splitter, no phone 3. unknown(3) - The mode is unknown |