HUAWEI-ENT-VOICE-COMMON-MIB
154 objects
This MIB module defines MIB objects which provides VOIP global parameters management.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE private TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.253 | IdentityhwEntVoiceCommonMIB | This MIB module defines MIB objects which provides VOIP global parameters management. | ||
| 1.3.6.1.4.1.2011.5.25.253.1 | NodehwEntServiceModeTable | |||
| 1.3.6.1.4.1.2011.5.25.253.1.1 | ScalarhwEntServiceModeConfig | read-write | current | Indicates the configuration of voice feature that will be supported by the system after resets. Options: h248Ag(1) sipAg(2) pbxSip(3) |
| 1.3.6.1.4.1.2011.5.25.253.1.2 | ScalarhwEntServiceModeActive | read-only | current | Indicates the configuration voice feature that is currently used. Options: h248Ag(1) sipAg(2) pbxSip(3) |
| 1.3.6.1.4.1.2011.5.25.253.2 | TablehwEntUserDefineRingTypeTable | not-accessible | current | This table is used to set the user-defined ring type. The index of this table is hwEntUserDefineRingType. |
| 1.3.6.1.4.1.2011.5.25.253.2.1 | RowhwEntUserDefineRingTypeEntry | not-accessible | current | This table is used to set the user-defined ring type. The index of this table is hwEntUserDefineRingType. |
| 1.3.6.1.4.1.2011.5.25.253.2.1.1 | ColumnhwEntUserDefineRingType | not-accessible | current | Indicates the index of user-define ring type. |
| 1.3.6.1.4.1.2011.5.25.253.2.1.2 | ColumnhwEntUserDefineRingFirstRing | read-write | current | Indicates the first ring time length. 0 means to cancel parameter value. Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.2.1.3 | ColumnhwEntUserDefineRingFirstInterval | read-write | current | Indicates the first silent time length. 0 means to cancel parameter value. Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.2.1.4 | ColumnhwEntUserDefineRingSecondRing | read-write | current | Indicates the second ring time length. 0 means to cancel parameter value. Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.2.1.5 | ColumnhwEntUserDefineRingSecondInterval | read-write | current | Indicates the second silent time length. 0 means to cancel parameter value. Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.2.1.6 | ColumnhwEntUserDefineRingThirdRing | read-write | current | Indicates the third ring time length. 0 means to cancel parameter value. Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.2.1.7 | ColumnhwEntUserDefineRingThirdInterval | read-write | current | Indicates the third silent time length. 0 means to cancel parameter value. Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.3 | TablehwEntRingModeTable | not-accessible | current | This table is used to set the ring mode. The indexes of this table are hwEntRingModeMgId, hwEntRingModeIndex. |
| 1.3.6.1.4.1.2011.5.25.253.3.1 | RowhwEntRingModeEntry | not-accessible | current | This table is used to set the ring mode. The indexes of this entry are hwEntRingModeMgId, hwEntRingModeIndex. |
| 1.3.6.1.4.1.2011.5.25.253.3.1.1 | ColumnhwEntRingModeMgId | not-accessible | current | Indicates the MG ID. The range of ID from 0 to 16777215 is for AG system, value of 33554431 is only for PBX system and the value input from 16777215 to 3355443… |
| 1.3.6.1.4.1.2011.5.25.253.3.1.2 | ColumnhwEntRingModeIndex | not-accessible | current | Indicates the ring mode index. |
| 1.3.6.1.4.1.2011.5.25.253.3.1.3 | ColumnhwEntRingModeName | read-create | current | Indicates the ring mode name. |
| 1.3.6.1.4.1.2011.5.25.253.3.1.4 | ColumnhwEntRingModeCascadeRingType | read-create | current | Indicates the cadence ringing type. 0: Normal ring 1:4 1: Special ring 1:2 2: Special ring 0.4:0.2:0.4:4 3: Long ring 6: Special ring 1.2:2 8: HK ring 1:3 9: H… |
| 1.3.6.1.4.1.2011.5.25.253.3.1.5 | ColumnhwEntRingModeInitRingType | read-create | current | Indicates the initial ringing type. 4: Normal ring (FSK) 1:4 17: Special ring (FSK) 1:2 18: Special ring (FSK) 0.4:0.2:0.4:4 22: Special ring (FSK) 1.2:2 24: H… |
| 1.3.6.1.4.1.2011.5.25.253.3.1.6 | ColumnhwEntRingModeRowStatus | read-create | current | Indicates the row status (the SIP supports only 4 and 6). Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6) |
| 1.3.6.1.4.1.2011.5.25.253.4 | NodehwEntSipStackParametersTable | |||
| 1.3.6.1.4.1.2011.5.25.253.4.1 | ScalarhwEntSipStackParaServer | read-write | current | The head-field of Server. |
| 1.3.6.1.4.1.2011.5.25.253.4.2 | ScalarhwEntSipStackParaOrganization | read-write | current | The head-field of Organization. |
| 1.3.6.1.4.1.2011.5.25.253.4.3 | ScalarhwEntSipStackParaUserAgent | read-write | current | The head-field of UserAgent. |
| 1.3.6.1.4.1.2011.5.25.253.4.4 | ScalarhwEntSipStackParaMaxForwards | read-write | current | The MaxForwards parameter of SipStack. Default: 70 |
| 1.3.6.1.4.1.2011.5.25.253.4.5 | ScalarhwEntSipStackParaT1 | read-write | current | The T1 timer(Round-Trip timer) of SipStack. Default: 500 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.4.6 | ScalarhwEntSipStackParaT2 | read-write | current | The T2 timer of SipStack(The maximum length of retransmission for non-invite request or invite response). Default: 4000 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.4.7 | ScalarhwEntSipStackParaT4 | read-write | current | The T4 timer of SipStack(The maximum length of message transmission in the network). Default: 5000 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.4.8 | ScalarhwEntSipStackParaTD | read-write | current | The D timer of SipStack(The maximum length of message retransmission for getting a response). Default: 32000 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.4.9 | ScalarhwEntSipStackParaMinSE | read-write | current | The timer for Minimum of Session-Expires. Default: 90 Unit: second |
| 1.3.6.1.4.1.2011.5.25.253.4.10 | ScalarhwEntSipStackParaSessionProgress | read-write | current | The length of retransmission for SessionProgress. Default: 180 Unit: second |
| 1.3.6.1.4.1.2011.5.25.253.4.11 | ScalarhwEntSipStackParaSessionRelProgress | read-write | current | The length of retransmission for SessionRelProgress. Default: 60 Unit: second |
| 1.3.6.1.4.1.2011.5.25.253.4.12 | ScalarhwEntSipStackParaEntityBasedSessionsTimerFlag | read-write | current | This flag indicates that whether the Sessions Timer based on UA-Entity. Options: enable(1) -Sessions Timer based on UA-Entity disable(2) -Sessions Timer not ba… |
| 1.3.6.1.4.1.2011.5.25.253.4.13 | ScalarhwEntSipStackParaHeaderFoldFlag | read-write | current | Indicates that whether the authentication header field is folded. Options: enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.253.4.14 | ScalarhwEntSipStackParaToHeaderCheckFlag | read-write | current | Indicates that whether to check to header. Options: enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.253.5 | NodehwEntDspAttributeTable | |||
| 1.3.6.1.4.1.2011.5.25.253.5.1 | ScalarhwEntDspFaxMaxTrainRate | read-write | current | Indicates the maximum fax training rate. Options: v17(1) v29(2) v27(3) Default: v17(1) |
| 1.3.6.1.4.1.2011.5.25.253.5.2 | ScalarhwEntDspFaxTrainMode | read-write | current | Indicates the fax training mode. Options: e2e(1) local(2) Default: e2e(1) |
| 1.3.6.1.4.1.2011.5.25.253.5.3 | ScalarhwEntDspCodeType | read-write | current | Indicates the default coding type of DSP channel. Options: g711A(1) g711u(2) g723(3) g729(4) g726by16k(5) g726by24k(6) g726by32k(7) g726by40k(8) Default: g711A… |
| 1.3.6.1.4.1.2011.5.25.253.5.4 | ScalarhwEntDspRtcpPackageSendInterval | read-write | current | Indicates the RTCP packet sending interval of DSP channel. The valid value must be no less than 500, 0 indicates that the parameter is disabled. Default: 5000 … |
| 1.3.6.1.4.1.2011.5.25.253.5.5 | ScalarhwEntDspRtpPacketInterval | read-write | current | Indicates the default RTP packet time of DSP channel. Options: 1. pt5ms(1) 2. pt10ms(2) 3. pt20ms(3) 4. pt30ms(4) Default: pt20ms(3) |
| 1.3.6.1.4.1.2011.5.25.253.5.6 | ScalarhwEntDspEchoCheck | read-write | current | Indicates whether to enable echo check of DSP channel. Options: enable(1) disable(2) Default: enable(1) |
| 1.3.6.1.4.1.2011.5.25.253.5.7 | ScalarhwEntDspSilenceReduce | read-write | current | Indicates whether to enable silence compression of DSP channel. Options: enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.253.5.8 | ScalarhwEntDspClearmodePayload | read-write | current | Indicates the default payload type of the DSP channel clearmode (it must not conflict with the payload used). Default: 100 |
| 1.3.6.1.4.1.2011.5.25.253.5.9 | ScalarhwEntDspSevereDegradethreshold | read-write | current | Indicates the default threshold of severely packet loss seconds. Default: 400 |
| 1.3.6.1.4.1.2011.5.25.253.5.10 | ScalarhwEntDspBvqm | read-write | current | Indicates the VQM switch. Options: enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.253.5.11 | ScalarhwEntDspPlc | read-write | current | Indicates the DSP packet loss compensation algorithm. Options: enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.253.5.12 | ScalarhwEntDspMinAdaptJitterBuffer | read-write | current | Minimum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer. Defaul… |
| 1.3.6.1.4.1.2011.5.25.253.5.13 | ScalarhwEntDspMaxAdaptJitterBuffer | read-write | current | Maximum adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer. Defaul… |
| 1.3.6.1.4.1.2011.5.25.253.5.14 | ScalarhwEntDspInitAdaptJitterBuffer | read-write | current | Initial adapt jitterbuffer of DSP. MinAdaptJitterBuffer<=InitAdaptJitterBuffer<=MaxAdaptJitterBuffer and the MinAdaptJitterBuffer<ThresholdJitterBuffer. Defaul… |
| 1.3.6.1.4.1.2011.5.25.253.5.15 | ScalarhwEntDspMinFixedJitterBuffer | read-write | current | Minimum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer. Default: 2 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.5.16 | ScalarhwEntDspMaxFixedJitterBuffer | read-write | current | Maximum fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer. Default: 135 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.5.17 | ScalarhwEntDspNormalFixedJitterBuffer | read-write | current | Initial fixed jitterbuffer of DSP. MinFixedJitterBuffer<=NormalFixedJitterBuffer<=MaxFixedJitterBuffer. Default: 60 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.5.18 | ScalarhwEntDspRedundancyPayload | read-write | current | Indicates the payload type value of redundancy (it must not conflict with the payload used). Default: 96 |
| 1.3.6.1.4.1.2011.5.25.253.5.19 | ScalarhwEntDspRedundancyT30 | read-write | current | Indicates the T30 redundancy parameter of T38 Fax. Default: 3 |
| 1.3.6.1.4.1.2011.5.25.253.5.20 | ScalarhwEntDspRedundancyT4 | read-write | current | Indicates the T4 redundancy parameter of T38 Fax. Default: 3 |
| 1.3.6.1.4.1.2011.5.25.253.5.21 | ScalarhwEntDspFaxV8Negotiate | read-write | current | Indicates the switch of the V8 negotiation of FAX. Options: enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.253.5.22 | ScalarhwEntDspRTCPXR | read-write | current | The switch of RTCP XR. Options: enable(1) -enable RTCP XR disable(2) -disable RTCP XR Default: enable(1) |
| 1.3.6.1.4.1.2011.5.25.253.5.23 | ScalarhwEntDspVbdPayload | read-write | current | Indicates the payload type value of VBD (it must not conflict with the payload used). Default: 102 |
| 1.3.6.1.4.1.2011.5.25.253.5.24 | ScalarhwEntDspRfcNtePayload | read-write | current | Indicates the payload type value of nte (it must not conflict with the payload used). Default: 97 |
| 1.3.6.1.4.1.2011.5.25.253.5.25 | ScalarhwEntDspG726R16kPayload | read-write | current | Indicates the payload type value of G.726-16k (it must not conflict with the payload used). Default: 103 |
| 1.3.6.1.4.1.2011.5.25.253.5.26 | ScalarhwEntDspG726R24kPayload | read-write | current | Indicates the payload type value of G.726-24k (it must not conflict with the payload used). Default: 104 |
| 1.3.6.1.4.1.2011.5.25.253.5.27 | ScalarhwEntDspG726R32kPayload | read-write | current | Indicates the payload type value of G.726-32k (it must not conflict with the payload used). Default: 101 |
| 1.3.6.1.4.1.2011.5.25.253.5.28 | ScalarhwEntDspG726R40kPayload | read-write | current | Indicates the payload type value of G.726-40k (it must not conflict with the payload used). Default: 105 |
| 1.3.6.1.4.1.2011.5.25.253.5.29 | ScalarhwEntDspAutoVBDSwitchMode | read-write | current | VBD switch mode. Options: 1. hostControl(1) -host control 2. autoSwitch(2) -auto switch Default: hostControl(1) |
| 1.3.6.1.4.1.2011.5.25.253.5.30 | ScalarhwEntDspAlarmAdaptJitterBuffer | read-write | current | Adapt jitterbuffer of DSP alarm threshold. Default: 150 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.6 | TablehwEntDspTemplateTable | not-accessible | current | This table is used to config the dsp parameters template. The index of this table is hwEntDspTemplateName. |
| 1.3.6.1.4.1.2011.5.25.253.6.1 | RowhwEntDspTemplateEntry | not-accessible | current | This table is used to config the dsp parameters template. The index of this entry is hwEntDspTemplateName. |
| 1.3.6.1.4.1.2011.5.25.253.6.1.1 | ColumnhwEntDspTemplateName | not-accessible | current | Indicates the dsp parameters template name. |
| 1.3.6.1.4.1.2011.5.25.253.6.1.2 | ColumnhwEntDspEc | read-create | current | Indicates the echo cotrol. Options: enable(1) -open disable(2) -close globalConfig(255) -using global config Default: globalConfig(255) |
| 1.3.6.1.4.1.2011.5.25.253.6.1.3 | ColumnhwEntDspJbMode | read-create | current | Indicates the jitterbuffer mode. Options: dynamic(1) -dynamic mode static(2) -static mode globalConfig(255) -use global config Default: globalConfig(255) |
| 1.3.6.1.4.1.2011.5.25.253.6.1.4 | ColumnhwEntDspNlp | read-create | current | Indicates the NLP mode. Options: close(1) -close normal(2) -normal mode enhanced(3) -enhanced mode globalConfig(255) -use global config Default: globalConfig(2… |
| 1.3.6.1.4.1.2011.5.25.253.6.1.5 | ColumnhwEntDspWorkMode | read-create | current | Indicates the dsp workmode. Options: voice(1) -voice mode fax(2) -fax mode modem(3) -modem mode globalConfig(255) -use global config Default: globalConfig(255) |
| 1.3.6.1.4.1.2011.5.25.253.6.1.6 | ColumnhwEntDspSc | read-create | current | Indicates the silence cotrol. Options: enable(1) -open disable(2) -close globalConfig(255) -use global config Default: globalConfig(255) |
| 1.3.6.1.4.1.2011.5.25.253.6.1.7 | ColumnhwEntDspInputGain | read-create | current | Indicates the input gain of DSP chip: 0-15 -correspond to -10 dB to +5 dB 255 -use global config Default: 255 |
| 1.3.6.1.4.1.2011.5.25.253.6.1.8 | ColumnhwEntDspOutputGain | read-create | current | Indicates the output gain of DSP chip: 0-20 -correspond to -10 dB to +10 dB; 255 -use global config Default: 255. |
| 1.3.6.1.4.1.2011.5.25.253.6.1.9 | ColumnhwEntDspDtmfPara | read-create | current | Indicates the transmission mode of DTMF. Options: globalConfig(1) -use global config nte(2) -nte transmission erase(3) -erase DTMF nteWithRedundancy(4) -nte wi… |
| 1.3.6.1.4.1.2011.5.25.253.6.1.10 | ColumnhwEntDspNteForDataevent | read-create | current | Indicates the mode of sending fax/modem event. Options: enable(1) -enable NTE for Dataevent globalConfig(2) -use global config Default: globalConfig(2) |
| 1.3.6.1.4.1.2011.5.25.253.6.1.11 | ColumnhwEntDspSpecialFlow | read-create | current | Indicates the dsp special flow. 0: intelligent telephone special flow: filter RTP messages and only processs nte messages 1: intelligent telephone special flow… |
| 1.3.6.1.4.1.2011.5.25.253.6.1.12 | ColumnhwEntDspRedundancyForVbd | read-create | current | Flag of locally starting the redundancy VBD function. Options: globalConfig(1) -use global config enable(2) -enable redundancy for vbd Default: globalConfig(1) |
| 1.3.6.1.4.1.2011.5.25.253.6.1.13 | ColumnhwEntDspTemplateRowStatus | read-create | current | Indicates the row status. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6) |
| 1.3.6.1.4.1.2011.5.25.253.7 | TablehwEntServiceNumTable | not-accessible | current | This table is used to config the binding between service number and DSP parameters template. The index of this table is hwEntServiceNumMap. |
| 1.3.6.1.4.1.2011.5.25.253.7.1 | RowhwEntServiceNumEntry | not-accessible | current | This table is used to config the binding between service number and DSP parameters template. The index of this entry is hwEntServiceNumMap. |
| 1.3.6.1.4.1.2011.5.25.253.7.1.1 | ColumnhwEntServiceNumMap | not-accessible | current | Indicates the service number digital map. |
| 1.3.6.1.4.1.2011.5.25.253.7.1.2 | ColumnhwEntServiceNumDspTemplate | read-create | current | Indicates the dsp parameters template name |
| 1.3.6.1.4.1.2011.5.25.253.7.1.3 | ColumnhwEntServiceNumRowStatus | read-create | current | Indicates the row status. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6) |
| 1.3.6.1.4.1.2011.5.25.253.8 | TablehwEntDspOperTable | not-accessible | current | This table is used to config the operation of DSP channel. The index of this table are hwEntDspDimmIndex, hwEntDspChannelIndex. |
| 1.3.6.1.4.1.2011.5.25.253.8.1 | RowhwEntDspOperEntry | not-accessible | current | This table is used to config the operation of DSP channel. The index of this entry are hwEntDspDimmIndex, hwEntDspChannelIndex. |
| 1.3.6.1.4.1.2011.5.25.253.8.1.1 | ColumnhwEntDspDimmIndex | not-accessible | current | Indicates the slotid/dsp index. bits 16-31 (16 bits): reserved bits 8-15 (8 bits): slotid index bits 0-7 (8 bits): dsp index |
| 1.3.6.1.4.1.2011.5.25.253.8.1.2 | ColumnhwEntDspChannelIndex | not-accessible | current | Indicates the DSP channel index. bits 8-31 (24 bits): reserved bits 0-7 (8 bits): channel index |
| 1.3.6.1.4.1.2011.5.25.253.8.1.3 | ColumnhwEntDspOperChannelState | read-only | current | Indicates the channel state. Options: idle(1) busy(2) wastage(3) fault(4) prohibit(5) pcmLoopback(6) ipLoopback(7) |
| 1.3.6.1.4.1.2011.5.25.253.8.1.4 | ColumnhwEntDspOperAdminStatus | read-write | current | Indicates the operation type. Options: prohibit(1) -prohibit unprohibit(2) -unprohibit pcmLoopback(3) -PCM loopback ipLoopback(4) -IP loopback noLoopback(5) -c… |
| 1.3.6.1.4.1.2011.5.25.253.8.1.5 | ColumnhwEntDspOperCodec | read-only | current | Indicates the codec of DSP. Options: g711a(1) g711u(2) g723(3) g729(4) g726by16k(5) g726by24k(6) g726by32k(7) g726by40k(8) g722(9) null(255) |
| 1.3.6.1.4.1.2011.5.25.253.8.1.6 | ColumnhwEntDspOperPacketInterval | read-only | current | Indicates the packet interval of DSP. |
| 1.3.6.1.4.1.2011.5.25.253.8.1.7 | ColumnhwEntDspOperJitterBufferMode | read-only | current | Indicates the jitter buffer mode of DSP. Options: dynamic(1) static(2) null(255) |
| 1.3.6.1.4.1.2011.5.25.253.8.1.8 | ColumnhwEntDspOperMinJitterBuffer | read-only | current | Indicates the minimum jitterbuffer of DSP. |
| 1.3.6.1.4.1.2011.5.25.253.8.1.9 | ColumnhwEntDspOperMaxJitterBuffer | read-only | current | Indicates the maximum jitterbuffer of DSP. |
| 1.3.6.1.4.1.2011.5.25.253.8.1.10 | ColumnhwEntDspOperInitJitterBuffer | read-only | current | Indicates the initial jitterbuffer of DSP. |
| 1.3.6.1.4.1.2011.5.25.253.8.1.11 | ColumnhwEntDspOperVAD | read-only | current | Indicates the switch state of VAD. Options: enable(1) disable(2) null(255) |
| 1.3.6.1.4.1.2011.5.25.253.8.1.12 | ColumnhwEntDspOperEC | read-only | current | Indicates the switch state of echo cancellation. Options: enable(1) disable(2) null(255) |
| 1.3.6.1.4.1.2011.5.25.253.8.1.13 | ColumnhwEntDspOperGainOut | read-only | current | Indicates the output gain of DSP. |
| 1.3.6.1.4.1.2011.5.25.253.8.1.14 | ColumnhwEntDspOperGainIn | read-only | current | Indicates the input gain of DSP. |
| 1.3.6.1.4.1.2011.5.25.253.8.1.15 | ColumnhwEntDspOprJBInPercent | read-only | current | Indicates the current fill level of the jitterbuffer in percent. |
| 1.3.6.1.4.1.2011.5.25.253.8.1.16 | ColumnhwEntDspOprIpSideMix | read-only | current | Indicates the IP side mix state of DSP. Options: noState(1) yesState(2) |
| 1.3.6.1.4.1.2011.5.25.253.8.1.17 | ColumnhwEntDspOprPcmSideMix | read-only | current | Indicates the PCM side mix state of DSP. Options: noState(1) yesState(2) |
| 1.3.6.1.4.1.2011.5.25.253.9 | TablehwEntDspStatisticsTable | not-accessible | current | This table is used to query the DSP channel statistics. The index of this table is hwEntDspDimmIndex. |
| 1.3.6.1.4.1.2011.5.25.253.9.1 | RowhwEntDspStatisticsEntry | not-accessible | current | This table is used to query the DSP channel statistics. The index of this entry is hwEntDspDimmIndex. |
| 1.3.6.1.4.1.2011.5.25.253.9.1.1 | ColumnhwEntDspStatisticsTotalNum | read-only | current | Indicates the total number of DSP channels. |
| 1.3.6.1.4.1.2011.5.25.253.9.1.2 | ColumnhwEntDspStatisticsFreeNum | read-only | current | Indicates the number of idle channels. |
| 1.3.6.1.4.1.2011.5.25.253.9.1.3 | ColumnhwEntDspStatisticsG711Num | read-only | current | Indicates the number of occupied DSP channels of the G.711. |
| 1.3.6.1.4.1.2011.5.25.253.9.1.4 | ColumnhwEntDspStatisticsAllNum | read-only | current | Indicates the number of occupied DSP channels of the full rate. |
| 1.3.6.1.4.1.2011.5.25.253.9.1.5 | ColumnhwEntDspStatisticsWastageNum | read-only | current | Indicates the number of DSP channels of the wastage. |
| 1.3.6.1.4.1.2011.5.25.253.9.1.6 | ColumnhwEntDspStatisticsFaultNum | read-only | current | Indicates the number of faulty DSP channels. |
| 1.3.6.1.4.1.2011.5.25.253.9.1.7 | ColumnhwEntDspStatisticsLoopNum | read-only | current | Indicates the number of DSP channels in the loopback. |
| 1.3.6.1.4.1.2011.5.25.253.9.1.8 | ColumnhwEntDspStatisticsForbiddenNum | read-only | current | Indicates the number of prohibited DSP channels. |
| 1.3.6.1.4.1.2011.5.25.253.10 | NodehwEntDspOverloadResourceTable | |||
| 1.3.6.1.4.1.2011.5.25.253.10.1 | ScalarhwEntDspResourceWorkMode | read-write | current | Indicates whether to restrict calls in case of insufficient DSP resource, when many calls raised. Options: normal(1) priority(2) Default: normal(1) |
| 1.3.6.1.4.1.2011.5.25.253.10.2 | ScalarhwEntDspResourcethreshold1 | read-write | current | Indicates the normal call will use the max threshold of the whole DSP resource. The value of hwEntDspResourcethreshold1 must be smaller than or equal to the hw… |
| 1.3.6.1.4.1.2011.5.25.253.10.3 | ScalarhwEntDspResourcethreshold2 | read-write | current | Indicates the max threshold of the whole DSP resource which used for the prior user. The value of hwEntDspResourcethreshold2 must be smaller than or equal to t… |
| 1.3.6.1.4.1.2011.5.25.253.10.4 | ScalarhwEntDspResourcethreshold3 | read-write | current | Indicates the max threshold of the whole DSP resource which used for the high prior user. Unit: 1/100 Default: 100 |
| 1.3.6.1.4.1.2011.5.25.253.11 | NodehwEntBandwidthParaTable | |||
| 1.3.6.1.4.1.2011.5.25.253.11.1 | ScalarhwEntBandwidthSupport | read-write | current | Indicates whether to restrict calls in case of insufficient bandwidth. Options: 1. enable(1) -support 2. disable(2) -not support Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.253.11.2 | ScalarhwEntBandwidthMax | read-write | current | Indicates the value of the maximum upstream bandwidth. Default: 1000 Unit: 100 kbit/s |
| 1.3.6.1.4.1.2011.5.25.253.11.3 | ScalarhwEntBandwidthReserved | read-write | current | Indicates the value of the bandwidth reserved for emergency calls. Default: 10 Unit: 100 kbit/s |
| 1.3.6.1.4.1.2011.5.25.253.12 | NodehwEntClipParaTable | |||
| 1.3.6.1.4.1.2011.5.25.253.12.1 | ScalarhwEntClipOnHookDualToneAlertLevel | read-write | current | Indicates the power of dual tone alert in onhook state. Support 16 electric: 0: -5.5dBm0 1: -6.5dBm0 2: -7.5dBm0 3: -8.5dBm0 4: -9.5dBm0 5: -10.5dBm0 6: -11.5d… |
| 1.3.6.1.4.1.2011.5.25.253.12.2 | ScalarhwEntClipOnHookFskLevel | read-write | current | Indicates the power of FSK level in onhook state. Support 16 electric: 0: -5.5dBm0 1: -6.5dBm0 2: -7.5dBm0 3: -8.5dBm0 4: -9.5dBm0 5: -10.5dBm0 6: -11.5dBm0 7:… |
| 1.3.6.1.4.1.2011.5.25.253.12.3 | ScalarhwEntClipOffHookDualToneAlertLevel | read-write | current | Indicates the power of dual tone alert in offhook state. Support 16 electric: 0: -5.5dBm0 1: -6.5dBm0 2: -7.5dBm0 3: -8.5dBm0 4: -9.5dBm0 5: -10.5dBm0 6: -11.5… |
| 1.3.6.1.4.1.2011.5.25.253.12.4 | ScalarhwEntClipOffHookFskLevel | read-write | current | Indicates the power of FSK level in offhook state. Support 16 electric: 0: -5.5dBm0 1: -6.5dBm0 2: -7.5dBm0 3: -8.5dBm0 4: -9.5dBm0 5: -10.5dBm0 6: -11.5dBm0 7… |
| 1.3.6.1.4.1.2011.5.25.253.12.5 | ScalarhwEntClipOnHookChnSeizure | read-write | current | Indicates the channel seize bits for onhook FSK. Default: 300 |
| 1.3.6.1.4.1.2011.5.25.253.12.6 | ScalarhwEntClipOnHookMarkSignal | read-write | current | Mark signal for onhook FSK. Default: 180 |
| 1.3.6.1.4.1.2011.5.25.253.12.7 | ScalarhwEntClipOnHookSendFskInterval | read-write | current | Indicates the interval between DT-AS and FSK when onhook. Default: 250 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.12.8 | ScalarhwEntClipOnHookDtAsDur | read-write | current | Indicates the duration for DT-AS when onhook. Default: 100 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.12.9 | ScalarhwEntClipOffHookMarkSignal | read-write | current | Mark signal for offhook FSK. Default: 80 |
| 1.3.6.1.4.1.2011.5.25.253.12.10 | ScalarhwEntClipOffHookDetectTeAckInterval | read-write | current | Indicates the interval between DT-AS and detecting terminal ack when offhook. Default: 160 |
| 1.3.6.1.4.1.2011.5.25.253.12.11 | ScalarhwEntClipOffHookSendFskInterval | read-write | current | Indicates the interval between detecting terminal ack and sending FSK when offhook. Default: 50 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.12.12 | ScalarhwEntClipOffHookDtAsDur | read-write | current | Indicates the duration for DT-AS when offhook. Default: 80 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.253.40 | NodehwEntVoiceCommonConformance | |||
| 1.3.6.1.4.1.2011.5.25.253.40.1 | NodehwEntVoiceCommonCompliances | |||
| 1.3.6.1.4.1.2011.5.25.253.40.1.1 | CompliancehwEntVoiceCommonCompliance | current | The compliance statement for systems supporting the this module. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2 | NodehwEntVoiceCommonGroups | |||
| 1.3.6.1.4.1.2011.5.25.253.40.2.1 | GrouphwEntServiceModeGroup | current | The hwEntServiceModeGroup group. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2.2 | GroupHwEntUserDefineRingTypeGroup | current | The HwEntUserDefineRingTypeGroup group. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2.3 | GroupHwEntRingModeGroup | current | The HwEntRingModeGroup group. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2.4 | GrouphwEntSipStackParametersGroup | current | The hwEntSipStackParametersGroup group. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2.5 | GrouphwEntDspAttributeGroup | current | The hwEntDspAttributeGroup group. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2.6 | GrouphwEntDspTemplateGroup | current | The HwEntDspTemplateGroup group. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2.7 | GrouphwEntServiceNumGroup | current | The HwEntServiceNumGroup group. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2.8 | GrouphwEntDspOperGroup | current | The HwEntDspOperGroup group. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2.9 | GrouphwEntDspStatisticsGroup | current | The HwEntDspStatisticsGroup group. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2.10 | GrouphwEntDspOverloadResourceGroup | current | The hwEntServiceModeGroup group. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2.11 | GrouphwEntBandwidthParaGroup | current | The hwEntBandwidthParaGroup group. | |
| 1.3.6.1.4.1.2011.5.25.253.40.2.12 | GrouphwEntClipParaGroup | current | The hwEntClipParaGroup group. |