HUAWEI-ENT-VOICE-PORT-MIB
103 objects
huawei VOICE PORT mib.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE private TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.252 | IdentityhwEntVoicePortMIB | huawei VOICE PORT mib. | ||
| 1.3.6.1.4.1.2011.5.25.252.1 | TablehwEntFxsPortConfigTable | not-accessible | current | Indicates the attribute configuration table of fxs ports. |
| 1.3.6.1.4.1.2011.5.25.252.1.1 | RowhwEntFxsPortConfigEntry | not-accessible | current | Indicates the attribute configuration entry of fxs ports. |
| 1.3.6.1.4.1.2011.5.25.252.1.1.1 | ColumnhwEntFxsPortIndex | not-accessible | current | Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port … |
| 1.3.6.1.4.1.2011.5.25.252.1.1.2 | ColumnhwEntFxsPortSendGain | read-write | current | Indicates the send gain the fxs port. 0: 5 dB 1: 4.5 dB 2: 4 dB 3: 3.5 dB 4: 3 dB 5: 2.5 dB 6: 2 dB 7: 1.5 dB 8: 1 dB 9: 0.5 dB 10: 0 dB 11: -0.5 dB 12: -1 dB … |
| 1.3.6.1.4.1.2011.5.25.252.1.1.3 | ColumnhwEntFxsPortRecvGain | read-write | current | Indicates the receive gain the fxs port. 0: 0 dB 1: -0.5 dB 2: -1 dB 3: -1.5 dB 4: -2 dB 5: -2.5 dB 6: -3 dB 7: -3.5 dB 8: -4 dB 9: -4.5 dB 10: -5 dB 11: -5.5 … |
| 1.3.6.1.4.1.2011.5.25.252.1.1.4 | ColumnhwEntFxsPortDialMode | read-write | current | Indicates the dialing mode. Options: dtmfPulseBoth(1) -DTMF pulse both dtmfOnly(2) -DTMF only pulseOnly(3) -Pulse only Default: dtmfPulseBoth(1) |
| 1.3.6.1.4.1.2011.5.25.252.1.1.5 | ColumnhwEntFxsPortReversePoleEnable | read-write | current | Indicates whether to support the polarity-reversing pulse. Options: enable(1) disable(2) Default: enable(1) |
| 1.3.6.1.4.1.2011.5.25.252.1.1.6 | ColumnhwEntFxsPortReversePoleLevel | read-write | current | Indicates the level width of the polarity-reversing pulse. Default: 100 Unit: ms Step: 10 ms. |
| 1.3.6.1.4.1.2011.5.25.252.1.1.7 | ColumnhwEntFxsPortPolarityReverseMode | read-write | current | Indicates the polarity reversal mode. Options: hard(1) -Hard polarity reversal soft(2) -Soft polarity reversal Default: hard(1) |
| 1.3.6.1.4.1.2011.5.25.252.1.1.8 | ColumnhwEntFxsPortLineLock | read-write | current | Indicates whether to support lock port. enable(1) disable(2) Default: enable(1) |
| 1.3.6.1.4.1.2011.5.25.252.1.1.9 | ColumnhwEntFxsPortNlpMode | read-write | current | Indicates the Nlp mode of the port. normal(1) -Normal mode ecGainAdjust(2) -Ec gain adjust mode enhance(3) -Enhance mode reduce(4) -Reduce mode disable(5): -Cl… |
| 1.3.6.1.4.1.2011.5.25.252.1.1.10 | ColumnhwEntFxsPortClipReversePole | read-write | current | Indicates whether to support the polarity-reversing pulse when Clip. enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.252.1.1.11 | ColumnhwEntFxsPortImpedance | read-write | current | Indicates the port impedance of the board. Each value corresponds to the required impedance in a specified scenario. 0: Bureau machine in China (200+680|| 100n… |
| 1.3.6.1.4.1.2011.5.25.252.1.1.12 | ColumnhwEntFxsPortCurrent | read-write | current | Port current supported by the board. The value ranges from 0 to 1, which indicates the port current value. 0: 16mA steady current 1: 20mA steady current Defaul… |
| 1.3.6.1.4.1.2011.5.25.252.1.1.13 | ColumnhwEntFxsPortHighLevel | read-write | current | Indicates the high power level width. Default: 100 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.252.1.1.14 | ColumnhwEntFxsPortLowLevel | read-write | current | Indicates the low power level width. Default: 300 Unit: ms |
| 1.3.6.1.4.1.2011.5.25.252.1.1.15 | ColumnhwEntFxsPortKcType | read-write | current | Indicates the KC type. Options: 1. type16kc(1) 2. type12kc(2) Default: type16kc(1) |
| 1.3.6.1.4.1.2011.5.25.252.1.1.16 | ColumnhwEntFxsPortVoltage | read-write | current | Indicates the valid voltage value of KC. 0: 0.45 Vrms 1: 0.775 Vrms 2: 1.0 Vrms 3: 1.5 Vrms 4: 2.0 Vrms 5: 2.5 Vrms 6: 3.0 Vrms 7: 3.5 Vrms 8: 4.0 Vrms 9: 4.5 … |
| 1.3.6.1.4.1.2011.5.25.252.1.1.17 | ColumnhwEntFxsPortActualSendGain | read-only | current | Indicates the actual send gain of the fxs port. 0: 5 dB 1: 4.5 dB 2: 4 dB 3: 3.5 dB 4: 3 dB 5: 2.5 dB 6: 2 dB 7: 1.5 dB 8: 1 dB 9: 0.5 dB 10: 0 dB 11: -0.5 dB … |
| 1.3.6.1.4.1.2011.5.25.252.1.1.18 | ColumnhwEntFxsPortActualRecvGain | read-only | current | Indicates the actual receive gain of the fxs port. 0: 0 dB 1: -0.5 dB 2: -1 dB 3: -1.5 dB 4: -2 dB 5: -2.5 dB 6: -3 dB 7: -3.5 dB 8: -4 dB 9: -4.5 dB 10: -5 dB… |
| 1.3.6.1.4.1.2011.5.25.252.2 | TablehwEntFxsPortOperTable | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the fxs ports. |
| 1.3.6.1.4.1.2011.5.25.252.2.1 | RowhwEntFxsPortOperEntry | not-accessible | current | Indicates the operation entry (management, maintenance, and status query) of the fxs ports. |
| 1.3.6.1.4.1.2011.5.25.252.2.1.1 | ColumnhwEntFxsPortOperIndex | not-accessible | current | Indicates the FxsPortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index |
| 1.3.6.1.4.1.2011.5.25.252.2.1.2 | ColumnhwEntFxsPortSrvState | read-only | current | Indicates state of the fxs port. Options: normal(1) fault(2) deactive(3) powerdeny(4) |
| 1.3.6.1.4.1.2011.5.25.252.2.1.3 | ColumnhwEntFxsPortAdminState | read-only | current | Indicates admin state of the fxs port. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6) |
| 1.3.6.1.4.1.2011.5.25.252.2.1.4 | ColumnhwEntFxsPortLineState | read-only | current | Indicates line state of the fxs port. Options: normal(1) onEarth(2) unknown(3) |
| 1.3.6.1.4.1.2011.5.25.252.2.1.5 | ColumnhwEntFxsPortAdminOper | read-write | current | Indicates operation type the fxs port. Options: remoteLoop(1) localLoop(2) cancelLoop(3) |
| 1.3.6.1.4.1.2011.5.25.252.3 | TablehwEntBraPortConfigTable | not-accessible | current | Indicates the attribute configuration table of the bra port. |
| 1.3.6.1.4.1.2011.5.25.252.3.1 | RowhwEntBraPortConfigEntry | not-accessible | current | Indicates the attribute configuration entry of the bra port. |
| 1.3.6.1.4.1.2011.5.25.252.3.1.1 | ColumnhwEntBraPortIndex | not-accessible | current | Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port … |
| 1.3.6.1.4.1.2011.5.25.252.3.1.2 | ColumnhwEntBraPortRemotePower | read-write | current | Indicates whether to support remote power supply. Options: enable(1) -Supported disable(2) -Not supported Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.252.3.1.3 | ColumnhwEntBraPortAutoDeactive | read-write | current | Indicates whether to support automatic deactivation. Options: enable(1) -Supported disable(2) -Not supported Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.252.3.1.4 | ColumnhwEntBraPortAutoDeactiveDelay | read-write | current | Indicates the automatic deactivation delay of the bra port. Default: 30 Unit: second. |
| 1.3.6.1.4.1.2011.5.25.252.3.1.5 | ColumnhwEntBraPortWorkMode | read-write | current | Indicates the bra port working mode. p2mp(1) -Point to multi-point p2p(2) -Point to point Default: p2mp(1) |
| 1.3.6.1.4.1.2011.5.25.252.3.1.6 | ColumnhwEntBraPortL1ActiveMode | read-write | current | Indicates layer 1 active mode of the bra port. Options: stable(1) unstable(2) Default: unstable(2). |
| 1.3.6.1.4.1.2011.5.25.252.3.1.7 | ColumnhwEntBraPortUniAlarmReport | read-write | current | Indicates whether to support user network interface fault alarm. enable(1) -Supported disable(2) -Not supported Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.252.3.1.8 | ColumnhwEntBraPortL2Monitor | read-write | current | Indicates whether to support layer 2 error statistic. enable(1) -Supported disable(2) -Not supported Default: enable(1) |
| 1.3.6.1.4.1.2011.5.25.252.4 | TablehwEntBraPortOperTable | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the bra ports. |
| 1.3.6.1.4.1.2011.5.25.252.4.1 | RowhwEntBraPortOperEntry | not-accessible | current | Indicates the operation entry (management, maintenance, and status query) of the bra ports. |
| 1.3.6.1.4.1.2011.5.25.252.4.1.1 | ColumnhwEntBraPortOperIndex | not-accessible | current | Indicates the BrPortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index |
| 1.3.6.1.4.1.2011.5.25.252.4.1.2 | ColumnhwEntBraPortSrvState | read-only | current | Indicates state of the bra port. Options: normal(1) fault(2) deactive(3) powerdeny(4) |
| 1.3.6.1.4.1.2011.5.25.252.4.1.3 | ColumnhwEntBraPortAdminState | read-only | current | Indicates admin state of the bra port. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6) |
| 1.3.6.1.4.1.2011.5.25.252.4.1.4 | ColumnhwEntBraPortAlarmState | read-only | current | Indicates the alarm state of the bra port, from left to right, each bit represents one alarm state. 0 means no alarm present,1 means the alarm present. bit0: L… |
| 1.3.6.1.4.1.2011.5.25.252.4.1.5 | ColumnhwEntBraPortAdminOper | read-write | current | Indicates operation type the bra port. Options: remoteLoop(1) localLoop(2) cancelLoop(3) |
| 1.3.6.1.4.1.2011.5.25.252.5 | TablehwEntVe1PortConfigTable | not-accessible | current | Indicates the attribute configuration table of the ve1 ports. |
| 1.3.6.1.4.1.2011.5.25.252.5.1 | RowhwEntVe1PortConfigEntry | not-accessible | current | Indicates the attribute configuration entry of the ve1 ports. |
| 1.3.6.1.4.1.2011.5.25.252.5.1.1 | ColumnhwEntVe1PortIndex | not-accessible | current | Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port … |
| 1.3.6.1.4.1.2011.5.25.252.5.1.2 | ColumnhwEntVe1PortFrameCheckMode | read-write | current | Indicates the CRC4 frame check mode of the ve1 port. Options: enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.252.5.1.3 | ColumnhwEntVe1PortImpedance | read-write | current | Indicates impedance of the ve1 port. Options: ohm75(1) ohm120(2) Default: ohm75(1) |
| 1.3.6.1.4.1.2011.5.25.252.5.1.4 | ColumnhwEntVe1PortSignalType | read-write | current | Indicates signal type of the ve1 port. Options: ccs(1) cas(2) Default: ccs(1) |
| 1.3.6.1.4.1.2011.5.25.252.5.1.5 | ColumnhwEntVe1PortAccessMode | read-write | current | Indicates physical layer digital section access mode of the ve1 port. Options: digitalAccess(1) directAccess(2) Default:digitalAccess(1) |
| 1.3.6.1.4.1.2011.5.25.252.5.1.6 | ColumnhwEntVe1PortL2Monitor | read-write | current | Indicates whether to support layer 2 error statistic of the ve1 port. enable(1) disable(2) Default: enable(1). |
| 1.3.6.1.4.1.2011.5.25.252.5.1.7 | ColumnhwEntVe1PortErrAlarmSwitch | read-write | current | Indicates ve1 error alarm switches, from left to right, each bit respresent a switch. 0 means disable, 1 means enable. bit0: report pcm line fault alarm. bit1:… |
| 1.3.6.1.4.1.2011.5.25.252.6 | TablehwEntVe1PortOperTable | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the ve1 ports. |
| 1.3.6.1.4.1.2011.5.25.252.6.1 | RowhwEntVe1PortOperEntry | not-accessible | current | Indicates the operation entry (management, maintenance, and status query) of the ve1 ports. |
| 1.3.6.1.4.1.2011.5.25.252.6.1.1 | ColumnhwEntVe1PortOperIndex | not-accessible | current | Indicates the Ve1PortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index |
| 1.3.6.1.4.1.2011.5.25.252.6.1.2 | ColumnhwEntVe1PortSrvState | read-only | current | Indicates state of the ve1 port. Options: normal(1) fault(2) lineAbnormal(3) powerdeny(4) |
| 1.3.6.1.4.1.2011.5.25.252.6.1.3 | ColumnhwEntVe1PortAdminState | read-only | current | Indicates admin state of the ve1 port. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6) |
| 1.3.6.1.4.1.2011.5.25.252.6.1.4 | ColumnhwEntVe1PortWarningState | read-only | current | Indicates the alarm status of the ve1 line. 0 means no alarm present, 1 means the alarm present. bit0: LOS alarm bit1: AIS alarm bit2: LFA alarm bit3: LMFA ala… |
| 1.3.6.1.4.1.2011.5.25.252.6.1.5 | ColumnhwEntVe1PortAdminOper | read-write | current | Indicates operation type of the ve1 port. Options: remoteLoop(1) localLoop(2) cancelLoop(3) |
| 1.3.6.1.4.1.2011.5.25.252.7 | TablehwEntVe1PortL1AlarmThresholdTable | not-accessible | current | degrade alarm threshold config table of ve1 port. |
| 1.3.6.1.4.1.2011.5.25.252.7.1 | RowhwEntVe1PortL1AlarmThresholdEntry | not-accessible | current | degrade alarm threshold config entry of ve1 port. |
| 1.3.6.1.4.1.2011.5.25.252.7.1.1 | ColumnhwEntVe1PortL1AlarmThresholdIndex | not-accessible | current | Indicates the Ve1PortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index |
| 1.3.6.1.4.1.2011.5.25.252.7.1.2 | ColumnhwEntVe1PortDmAlarmThreshold | read-write | current | Indicates the degrade minute alarm threshold. Default: 8 |
| 1.3.6.1.4.1.2011.5.25.252.7.1.3 | ColumnhwEntVe1PortEsAlarmThreshold | read-write | current | Indicates the error second alarm threshold. Default: 432 |
| 1.3.6.1.4.1.2011.5.25.252.7.1.4 | ColumnhwEntVe1PortCsesAlarmThreshold | read-write | current | Indicates the sequential severe error second alarm threshold. Default: 4 |
| 1.3.6.1.4.1.2011.5.25.252.8 | TablehwEntFxoPortConfigTable | not-accessible | current | Indicates the attribute configuration table of fxo ports. |
| 1.3.6.1.4.1.2011.5.25.252.8.1 | RowhwEntFxoPortConfigEntry | not-accessible | current | Indicates the attribute configuration entry of fxo ports. |
| 1.3.6.1.4.1.2011.5.25.252.8.1.1 | ColumnhwEntFxoPortIndex | not-accessible | current | Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port … |
| 1.3.6.1.4.1.2011.5.25.252.8.1.2 | ColumnhwEntFxoPortSendGain | read-write | current | Indicates send gain of the fxo port. 0: 13.5dB, 1: 13.0dB, 2: 12.5dB 3: 12.0dB, 4: 11.5dB, 5: 11.0dB 6: 10.5dB, 7: 10.0dB, 8: 9.5dB 9: 9.0dB, 10: 8.5dB, 11: 8.… |
| 1.3.6.1.4.1.2011.5.25.252.8.1.3 | ColumnhwEntFxoPortRecvGain | read-write | current | Indicates receive gain of the fxo port. 0: 13.5dB, 1: 13.0dB, 2: 12.5dB 3: 12.0dB, 4: 11.5dB, 5: 11.0dB 6: 10.5dB, 7: 10.0dB, 8: 9.5dB 9: 9.0dB, 10: 8.5dB, 11:… |
| 1.3.6.1.4.1.2011.5.25.252.8.1.4 | ColumnhwEntFxoPortDcImpedance | read-write | current | Indicates DC impedance of the fxo port. 0: 50 1: 800 Default: 0 Unit: |
| 1.3.6.1.4.1.2011.5.25.252.8.1.5 | ColumnhwEntFxoPortAcImpedance | read-write | current | Indicates AC impedance of the fxo port. 0: 600 1: 900 2: 270 + (750 || 150 nF) and 275 + (780 || 150 nF) 3: 220 + (820 || 120 nF) and 220 + (820 || 115 nF) 4: … |
| 1.3.6.1.4.1.2011.5.25.252.8.1.6 | ColumnhwEntFxoPortRingMinDuration | read-write | current | Indicates the min of the ring duration time. 0: 100ms 1: 150ms 2: 200ms 3: 256ms 4: 384ms 5: 512ms 6: 640ms 7: 1024ms Default: 2 |
| 1.3.6.1.4.1.2011.5.25.252.8.1.7 | ColumnhwEntFxoPortRingMaxInterval | read-write | current | Indicates the max of the ring interval time. 0: not use, 1: 128ms, 2: 256ms, 3: 284ms 4: 512ms, 5: 640ms, 6: 768ms, 7: 896ms 8: 1024ms, 9: 1152ms, 10: 1280ms, … |
| 1.3.6.1.4.1.2011.5.25.252.8.1.8 | ColumnhwEntFxoPortRingFrequency | read-write | current | Indicates the ring frequency. 0: 16Hz 1: 25Hz 2: 50Hz Default: 1 |
| 1.3.6.1.4.1.2011.5.25.252.8.1.9 | ColumnhwEntFxoPortRingAcAmplitude | read-write | current | Indicates the ring of the AC amplitude. 0: 74V 1: 65V 2: 50V Default: 2 |
| 1.3.6.1.4.1.2011.5.25.252.8.1.10 | ColumnhwEntFxoPortRingOffset | read-write | current | Indicates the ring offset. 0-100: -50V ~ 50V Default: 70 |
| 1.3.6.1.4.1.2011.5.25.252.8.1.11 | ColumnhwEntFxoPortFeedMaxVoltage | read-write | current | Indicates the max feed voltage. Default: -20 Unit:V |
| 1.3.6.1.4.1.2011.5.25.252.8.1.12 | ColumnhwEntFxoPortFeedMinVoltage | read-write | current | Indicates the min feed voltage. Default: -80 Unit:V |
| 1.3.6.1.4.1.2011.5.25.252.8.1.13 | ColumnhwEntFxoPortFeedMaxCurrent | read-write | current | Indicates the max feed current. 0: 25mA 1: 30mA 2: 35mA 3: 40mA Default: 2 |
| 1.3.6.1.4.1.2011.5.25.252.8.1.14 | ColumnhwEntFxoPortFeedMinCurrent | read-write | current | Indicates the min of the PTP feed current. 0: 16mA 1: 17mA 2: 18mA 3: 19mA 4: 20mA Default: 0 |
| 1.3.6.1.4.1.2011.5.25.252.9 | TablehwEntFxoPortOperTable | not-accessible | current | Indicates the operation table (management, maintenance, and status query) of the fxo ports. |
| 1.3.6.1.4.1.2011.5.25.252.9.1 | RowhwEntFxoPortOperEntry | not-accessible | current | Indicates the operation entry (management, maintenance, and status query) of the fxo ports. |
| 1.3.6.1.4.1.2011.5.25.252.9.1.1 | ColumnhwEntFxoPortOperIndex | not-accessible | current | Indicates the FxsPortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index |
| 1.3.6.1.4.1.2011.5.25.252.9.1.2 | ColumnhwEntFxoPortSrvState | read-only | current | Indicates state of the fxo port. Options: normal(1) fault(2) deactive(3) powredeny(4) |
| 1.3.6.1.4.1.2011.5.25.252.9.1.3 | ColumnhwEntFxoPortAdminState | read-only | current | Indicates the fxo port Admin state. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6) |
| 1.3.6.1.4.1.2011.5.25.252.9.1.4 | ColumnhwEntFxoPortLineState | read-only | current | Indicates line state of the fxo port. Options: normal(1) fault(2) unknown(3) |
| 1.3.6.1.4.1.2011.5.25.252.9.1.5 | ColumnhwEntFxoPortAdminOper | read-write | current | Indicates the operate type. Options: remoteLoop(1) localLoop(2) cancelLoop(3) |
| 1.3.6.1.4.1.2011.5.25.252.10 | NodehwEntVoicePortConformance | |||
| 1.3.6.1.4.1.2011.5.25.252.10.1 | NodehwEntVoicePortCompliances | |||
| 1.3.6.1.4.1.2011.5.25.252.10.1.1 | CompliancehwEntVoicePortCompliance | current | The compliance statement for systems supporting the this module. | |
| 1.3.6.1.4.1.2011.5.25.252.10.2 | NodehwEntVoicePortGroups | |||
| 1.3.6.1.4.1.2011.5.25.252.10.2.1 | GrouphwEntFxsPortConfigGroup | current | The hwEntFxsPortConfig group. | |
| 1.3.6.1.4.1.2011.5.25.252.10.2.2 | GrouphwEntFxsPortOperGroup | current | The hwEntFxsPortOper group. | |
| 1.3.6.1.4.1.2011.5.25.252.10.2.3 | GrouphwEntBraPortConfigGroup | current | The HwEntBraPortConfig group. | |
| 1.3.6.1.4.1.2011.5.25.252.10.2.4 | GrouphwEntBraPortOperGroup | current | The HwEntBraPortOper group. | |
| 1.3.6.1.4.1.2011.5.25.252.10.2.5 | GrouphwEntVe1PortConfigGroup | current | The HwEntVe1PortConfig group. | |
| 1.3.6.1.4.1.2011.5.25.252.10.2.6 | GrouphwEntVe1PortOperGroup | current | The HwEntVe1PortOper group. | |
| 1.3.6.1.4.1.2011.5.25.252.10.2.7 | GrouphwEntVe1PortL1AlarmThresholdGroup | current | The HwEntVe1PortL1AlarmThreshold group. | |
| 1.3.6.1.4.1.2011.5.25.252.10.2.8 | GrouphwEntFxoPortConfigGroup | current | The HwEntFxoPortConfig group. | |
| 1.3.6.1.4.1.2011.5.25.252.10.2.9 | GrouphwEntFxoPortOperGroup | current | The HwEntFxoPortOper group. |