HUAWEI-ENT-VOICE-SIPAG-MIB
181 objects
This mib is used for defining huawei's SIP MIB objects, which provides SIP management.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE private TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.250 | IdentityhwEntVoiceSipagMIB | This mib is used for defining huawei's SIP MIB objects, which provides SIP management. | ||
| 1.3.6.1.4.1.2011.5.25.250.1 | TablehwEntSipAgConfigTable | not-accessible | current | This table is used to config the parameters of SipAg. The index of this table is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.1.1 | RowhwEntSipAgConfigEntry | not-accessible | current | This table is used to config the parameters of SipAg. The index of this entry is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.1 | ColumnhwEntSipAgId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.2 | ColumnhwEntSipAgMediaIPAddress | read-create | current | Indicates the media IP address. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.3 | ColumnhwEntSipAgSignallingIPAddress | read-create | current | Indicates the signalling IP address. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.4 | ColumnhwEntSipAgSignallingPort | read-create | current | Indicates the signalling port. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.5 | ColumnhwEntSipAgMediaAddrName | read-create | current | Indicates the dynamic media IP name. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.6 | ColumnhwEntSipAgSignallingAddrName | read-create | current | Indicates the dynamic signalliing IP name. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.7 | ColumnhwEntSipAgTransMode | read-create | current | Indicates the transfer mode. Options: tcp(1) -TCP udp(2) -UDP sctp(3) -SCTP Default: udp(2) |
| 1.3.6.1.4.1.2011.5.25.250.1.1.8 | ColumnhwEntSipAgDomainName | read-create | current | Indicates the domain name of sipag. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.9 | ColumnhwEntSipAgHomeDomainName | read-create | current | Indicates the home domain name. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.10 | ColumnhwEntSipAgRegisterUri | read-create | current | Indicates the Register-URI. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.11 | ColumnhwEntSipAgConferenceFactoryUri | read-create | current | Indicates the ConferenceFactory-URI. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.12 | ColumnhwEntSipAgDesc | read-create | current | Indicates the Description. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.13 | ColumnhwEntSipAgPhoneContext | read-create | current | Indicates the Phone Context. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.14 | ColumnhwEntSipAgRowStatus | read-create | current | This is used to create new rows in this table, modify existing rows, and delete existing rows. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.15 | ColumnhwEntSipAgAdminStatus | read-create | current | Indicates the AdminStatus. Options: reset(1) -reset switchover(2) -switchover |
| 1.3.6.1.4.1.2011.5.25.250.1.1.16 | ColumnhwEntSipAgSwitchoverDestination | read-create | current | Indicates the target proxy of switchover. Options: 0: primary proxy 1: secondary proxy |
| 1.3.6.1.4.1.2011.5.25.250.1.1.17 | ColumnhwEntSipAgProfileIndex | read-create | current | Indicates the ProfileIndex. Default: 1 |
| 1.3.6.1.4.1.2011.5.25.250.1.1.18 | ColumnhwEntSipAgProfileName | read-only | current | Indicates the ProfileName. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.19 | ColumnhwEntSipAgSrvLogicIndex | read-create | current | Indicates the servelogic index. Default: 0 |
| 1.3.6.1.4.1.2011.5.25.250.1.1.20 | ColumnhwEntSipAgSrvLogicName | read-only | current | Indicates the servelogic name. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.21 | ColumnhwEntSipAgServerDhcpOption | read-create | current | Indicates the DHCP option. Options: none(1) -none option120(2) -option120 option21(3) -option21 Default: none(1) |
| 1.3.6.1.4.1.2011.5.25.250.1.1.22 | ColumnhwEntSipAgAuthMode | read-create | current | Indicates the user authentication mode. Options: interface(1) -interface user(2) -single user Default: user(2) |
| 1.3.6.1.4.1.2011.5.25.250.1.1.23 | ColumnhwEntSipAgAuthUserName | read-create | current | Indicates the auth username. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.24 | ColumnhwEntSipAgAuthPasswordMode | read-create | current | Indicates the auth password mode. Options: password(1) -auth by password ha1(2) -auth by ha1 Default: password(1) |
| 1.3.6.1.4.1.2011.5.25.250.1.1.25 | ColumnhwEntSipAgAuthPassword | read-create | current | Indicates the auth password. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.26 | ColumnhwEntSipAgAuthHA1 | read-create | current | Indicates the auth ha1 password. |
| 1.3.6.1.4.1.2011.5.25.250.1.1.27 | ColumnhwEntSipAgSubUAProfile | read-create | current | Indicates the flag to subscribe to UA-Profile. Options: enable(1) disable(2) Default: enable(1) |
| 1.3.6.1.4.1.2011.5.25.250.1.1.28 | ColumnhwEntSipAgSubRegState | read-create | current | Indicates the flag to subscribe to REG-STATE. Options: enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.250.1.1.29 | ColumnhwEntSipAgSubMwi | read-create | current | Indicates the flag to subscribe to MWI. Options: enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.250.1.1.30 | ColumnhwEntSipAgSdpNegoMode | read-create | current | Indicates the SDP negotiation mode. Options: local(1) -Local end takes priority when codec negotiation remote(2) -Remote end takes priority when codec negotiat… |
| 1.3.6.1.4.1.2011.5.25.250.1.1.31 | ColumnhwEntSipAgProxyDualHome | read-create | current | Indicates the mode of supporting proxy dual-homing. Options: no(1) -not support proxy dual-homing dualhome(2) -support proxy dual-homing, but not support auto … |
| 1.3.6.1.4.1.2011.5.25.250.1.1.32 | ColumnhwEntSipAgProxyDetectMode | read-create | current | Indicate the proxy detection mode. Options: option(1) -detect proxy by option message probe(2) -detect proxy by probe mode register(3) -detect proxy by registe… |
| 1.3.6.1.4.1.2011.5.25.250.1.1.33 | ColumnhwEntSipAgProxyRefreshMode | read-create | current | Indicate Proxy address refresh mode. Options: immediate(1) -immediate switch defer(2) -switch in no calls cases no-switch(3) -no switch null(255) -invalid value |
| 1.3.6.1.4.1.2011.5.25.250.2 | TablehwEntSipAgRunningTable | not-accessible | current | This table is used to query the running parameters. The index of this table is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.2.1 | RowhwEntSipAgRunningEntry | not-accessible | current | This table is used to query the running parameters. The index of this entry is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.1 | ColumnhwEntSipAgRunningId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.2 | ColumnhwEntSipAgRunningMediaIPAddress | read-only | current | Indicates the media ip address. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.3 | ColumnhwEntSipAgRunningSignallingIPAddress | read-only | current | Indicates the signalling ip address. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.4 | ColumnhwEntSipAgRunningSignallingPort | read-only | current | Indicates the Signalling Port. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.5 | ColumnhwEntSipAgRunningMediaAddrName | read-only | current | Indicates the current dynamic media IP name. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.6 | ColumnhwEntSipAgRunningSignallingAddrName | read-only | current | Indicates the current dynamic signalling IP name. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.7 | ColumnhwEntSipAgRunningTransMode | read-only | current | Indicates the Transfer Mode. null(255) means the interface is not started. Options: tcp(1) -TCP udp(2) -UDP sctp(3) -SCTP null(255) -interface is not started |
| 1.3.6.1.4.1.2011.5.25.250.2.1.8 | ColumnhwEntSipAgRunningDomainName | read-only | current | Indicates the domain name of sipag. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.9 | ColumnhwEntSipAgRunningHomeDomainName | read-only | current | Indicates the home domain name. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.10 | ColumnhwEntSipAgRunningRegisterUri | read-only | current | Indicates the register-URI. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.11 | ColumnhwEntSipAgRunningConferenceFactoryUri | read-only | current | Indicates the conferencefactory-URI. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.12 | ColumnhwEntSipAgRunningDesc | read-only | current | Indicates the description of sipag. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.13 | ColumnhwEntSipAgRunningPhoneContext | read-only | current | Indicates the phone context. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.14 | ColumnhwEntSipAgRunningProfileIndex | read-only | current | Indicates the profile index. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.15 | ColumnhwEntSipAgRunningProfileName | read-only | current | Indicates the ProfileName. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.16 | ColumnhwEntSipAgRunningSrvLogicIndex | read-only | current | Indicates the servelogic index. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.17 | ColumnhwEntSipAgRunningSrvLogicName | read-only | current | Indicates the servelogic name. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.18 | ColumnhwEntSipAgRunningServerDhcpOption | read-only | current | Indicates the DHCP option. Options: none(1) -none option120(2) -option120 option21(3) -option21 |
| 1.3.6.1.4.1.2011.5.25.250.2.1.19 | ColumnhwEntSipAgRunningAuthMode | read-only | current | Indicates user authentication mode. Options: interface(1) -interface user(2) -single user |
| 1.3.6.1.4.1.2011.5.25.250.2.1.20 | ColumnhwEntSipAgRunningAuthUserName | read-only | current | Indicates the auth username. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.21 | ColumnhwEntSipAgRunningAuthPasswordMode | read-only | current | Indicates the auth password mode. Options: password(1) -password ha1(2) -HA1 |
| 1.3.6.1.4.1.2011.5.25.250.2.1.22 | ColumnhwEntSipAgRunningAuthPassword | read-only | current | Indicates the auth password. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.23 | ColumnhwEntSipAgRunningAuthHA1 | read-only | current | Indicates the auth ha1 password. |
| 1.3.6.1.4.1.2011.5.25.250.2.1.24 | ColumnhwEntSipAgRunningSubUAProfile | read-only | current | Indicates the flag to subscribe to UA-Profile. Options: enable(1) disable(2) |
| 1.3.6.1.4.1.2011.5.25.250.2.1.25 | ColumnhwEntSipAgRunningSubRegState | read-only | current | Indicates the flag to subscribe to REG-STATE. Options: enable(1) disable(2) |
| 1.3.6.1.4.1.2011.5.25.250.2.1.26 | ColumnhwEntSipAgRunningSubMwi | read-only | current | Indicates the flag to subscribe to MWI. Options: enable(1) disable(2) |
| 1.3.6.1.4.1.2011.5.25.250.2.1.27 | ColumnhwEntSipAgRunningSdpNegoMode | read-only | current | Indicates the SDP negotiation mode. Options: local(1) -local first remote(2) -remote first |
| 1.3.6.1.4.1.2011.5.25.250.2.1.28 | ColumnhwEntSipAgRunningProxyDualHome | read-only | current | Indicate the mode of supporting proxy dual-homing. Options: no(1) -not support proxy dual-homing dualhome(2) -support proxy dual-homing, but not support auto s… |
| 1.3.6.1.4.1.2011.5.25.250.2.1.29 | ColumnhwEntSipAgRunningProxyDetectMode | read-only | current | Indicates the proxy detection mode. Options: option(1) -detection proxy by option message probe(2) -detection proxy by probe mode register(3) -detection proxy … |
| 1.3.6.1.4.1.2011.5.25.250.2.1.30 | ColumnhwEntSipAgRunningProxyRefreshMode | read-only | current | Indicate Proxy address refresh mode. Options: immediate(1) -immediate switch defer(2) -switch in no calls cases no-switch(3) -no switch |
| 1.3.6.1.4.1.2011.5.25.250.2.1.31 | ColumnhwEntSipAgRunningState | read-only | current | Indicate the sipag state. Options: notStart(1) fault(2) normal(3) |
| 1.3.6.1.4.1.2011.5.25.250.3 | TablehwEntSipAgProxyTable | not-accessible | current | This table is used to config the parameters of sipag proxy. The indexes of this table are hwEntSipAgId, hwSipAgProxyIndex. |
| 1.3.6.1.4.1.2011.5.25.250.3.1 | RowhwEntSipAgProxyEntry | not-accessible | current | This table is used to config the parameters of sipag proxy. The indexes of this entry are hwEntSipAgId, hwSipAgProxyIndex. |
| 1.3.6.1.4.1.2011.5.25.250.3.1.1 | ColumnhwEntSipAgProxyId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.3.1.2 | ColumnhwSipAgProxyIndex | not-accessible | current | proxy index. 0: main 1: standby |
| 1.3.6.1.4.1.2011.5.25.250.3.1.3 | ColumnhwSipAgProxyIPAddress1 | read-write | current | Indicates the proxy IP address1. |
| 1.3.6.1.4.1.2011.5.25.250.3.1.4 | ColumnhwSipAgProxyIPAddress2 | read-write | current | Indicates the proxy IP address2. |
| 1.3.6.1.4.1.2011.5.25.250.3.1.5 | ColumnhwSipAgProxyPort | read-write | current | Indicates the proxy port. |
| 1.3.6.1.4.1.2011.5.25.250.3.1.6 | ColumnhwSipAgProxyDomainName | read-write | current | Indicates the proxy domain name. |
| 1.3.6.1.4.1.2011.5.25.250.3.1.7 | ColumnhwSipAgProxyAddressMode | read-write | current | The proxy address mode. ip(1) dnsA(2) dnsSrv(3) dnsNaptr(4) |
| 1.3.6.1.4.1.2011.5.25.250.4 | TablehwEntSipAgProxyRunningTable | not-accessible | current | This table is used to query the running parameters of sipag proxy. The indexes of this table are hwEntSipAgId, hwSipAgProxyIndex. |
| 1.3.6.1.4.1.2011.5.25.250.4.1 | RowhwEntSipAgProxyRunningEntry | not-accessible | current | This table is used to query the running parameters sipag proxy. The indexes of this entry are hwEntSipAgId, hwSipAgProxyIndex. |
| 1.3.6.1.4.1.2011.5.25.250.4.1.1 | ColumnhwEntSipAgProxyRunningId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.4.1.2 | ColumnhwSipAgProxyRunningIndex | not-accessible | current | proxy index. 0: main 1: standby |
| 1.3.6.1.4.1.2011.5.25.250.4.1.3 | ColumnhwSipAgProxyRunningIPAddress1 | read-only | current | Indicates the proxy IP address1. |
| 1.3.6.1.4.1.2011.5.25.250.4.1.4 | ColumnhwSipAgProxyRunningIPAddress2 | read-only | current | Indicates the proxy IP address2. |
| 1.3.6.1.4.1.2011.5.25.250.4.1.5 | ColumnhwSipAgProxyRunningPort | read-only | current | Indicates the Proxy Port. |
| 1.3.6.1.4.1.2011.5.25.250.4.1.6 | ColumnhwSipAgProxyRunningDomainName | read-only | current | Indicates the proxy domain name. |
| 1.3.6.1.4.1.2011.5.25.250.4.1.7 | ColumnhwSipAgProxyRunningAddressMode | read-only | current | The proxy address mode. ip(1) dnsA(2) dnsSrv(3) dnsNaptr(4) |
| 1.3.6.1.4.1.2011.5.25.250.4.1.8 | ColumnhwSipAgProxyRunningState | read-only | current | The proxy state. unknown(1) down(2) up(3) |
| 1.3.6.1.4.1.2011.5.25.250.5 | TablehwEntSipProfileTable | not-accessible | current | This table is used to query the sipag profile. The index of this table is hwEntSipProfileIndex. |
| 1.3.6.1.4.1.2011.5.25.250.5.1 | RowhwEntSipProfileEntry | not-accessible | current | This table is used to config the Sip Profile. The index of this entry is hwEntSipProfileIndex. |
| 1.3.6.1.4.1.2011.5.25.250.5.1.1 | ColumnhwEntSipProfileIndex | not-accessible | current | Indicates the index of sipprofile. |
| 1.3.6.1.4.1.2011.5.25.250.5.1.2 | ColumnhwEntSipProfileName | read-only | current | Indicates the name of sipprofile. |
| 1.3.6.1.4.1.2011.5.25.250.6 | TablehwEntSipSrvLogicTable | not-accessible | current | This table is used to config the Sip Serve-Logic list. The index of this table is hwEntSipSrvLogicIndex. |
| 1.3.6.1.4.1.2011.5.25.250.6.1 | RowhwEntSipSrvLogicEntry | not-accessible | current | This table is used to config the sip serve-logic list. The index of this entry is hwEntSipSrvLogicIndex. |
| 1.3.6.1.4.1.2011.5.25.250.6.1.1 | ColumnhwEntSipSrvLogicIndex | not-accessible | current | Indicates the index of serve-logic. |
| 1.3.6.1.4.1.2011.5.25.250.6.1.2 | ColumnhwEntSipSrvLogicName | read-only | current | Indicates the name of serve-logic. |
| 1.3.6.1.4.1.2011.5.25.250.7 | TablehwEntSipAgDmmParaTable | not-accessible | current | This table is used to config the digitmap. The index of this table is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.7.1 | RowhwEntSipAgDmmParaEntry | not-accessible | current | This table is used to config the digitmap. The index of this entry is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.7.1.1 | ColumnhwEntSipAgDmmParaId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.7.1.2 | ColumnhwEntSipAgDmmParaStartTimer | read-write | current | Indicates the length of the DMM start timer. Default: 20 Unit: second |
| 1.3.6.1.4.1.2011.5.25.250.7.1.3 | ColumnhwEntSipAgDmmParaShortTimer | read-write | current | Indicates the length of the DMM short timer. Default: 4 Unit: second |
| 1.3.6.1.4.1.2011.5.25.250.7.1.4 | ColumnhwEntSipAgDmmParaLongTimer | read-write | current | Indicates the length of the DMM long timer. Default: 20 Unit: second |
| 1.3.6.1.4.1.2011.5.25.250.8 | TablehwEntSipAgUserGroupTable | not-accessible | current | This table is used to config the parameters of sip user group. The index of this table is hwEntSipAgUserGroupName. |
| 1.3.6.1.4.1.2011.5.25.250.8.1 | RowhwEntSipAgUserGroupEntry | not-accessible | current | This table is used to config the parameters of sip user group. The index of this entry is hwEntSipAgUserGroupName. |
| 1.3.6.1.4.1.2011.5.25.250.8.1.1 | ColumnhwEntSipAgUserGroupSipAgId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.8.1.2 | ColumnhwEntSipAgUserGroupId | not-accessible | current | User Group ID. |
| 1.3.6.1.4.1.2011.5.25.250.8.1.3 | ColumnhwEntSipAgUserGroupRegisterUriMode | read-create | current | Indicates the user group register URI mode. Options: inneruser(1) -inner user alone(2) -alone |
| 1.3.6.1.4.1.2011.5.25.250.8.1.4 | ColumnhwEntSipAgUserGroupUri | read-create | current | Indicates the Register-URI of the sip user group without the domain. |
| 1.3.6.1.4.1.2011.5.25.250.8.1.5 | ColumnhwEntSipAgUserGroupGrpName | read-create | current | Indicates the sip user group Name. |
| 1.3.6.1.4.1.2011.5.25.250.8.1.6 | ColumnhwEntSipAgUserGroupAuthUserName | read-create | current | Indicates the Auth Username of the sip user group. |
| 1.3.6.1.4.1.2011.5.25.250.8.1.7 | ColumnhwEntSipAgUserGroupAuthPassWordMode | read-create | current | Indicates the Auth PasswordMode of the sip user group. Options: password(1) -auth by password ha1(2) -auth by HA1 Default: password(1) |
| 1.3.6.1.4.1.2011.5.25.250.8.1.8 | ColumnhwEntSipAgUserGroupAuthPassword | read-create | current | Indicates the Auth Password of the sip user group. |
| 1.3.6.1.4.1.2011.5.25.250.8.1.9 | ColumnhwEntSipAgUserGroupAuthHA1 | read-create | current | Indicates the Auth HA1 value of the sip user group. |
| 1.3.6.1.4.1.2011.5.25.250.8.1.10 | ColumnhwEntSipAgUserGroupPrecinctMode | read-create | current | Indicates the user PrecinctMode in the sip user group. Options: local(1) remote(2) Default: local(1) |
| 1.3.6.1.4.1.2011.5.25.250.8.1.11 | ColumnhwEntSipAgUserGroupSubUaProfile | read-create | current | Indicates the flag of the user group with the same UA Profile privilege. Options: enable(1) disable(2) Default: enable(1) |
| 1.3.6.1.4.1.2011.5.25.250.8.1.12 | ColumnhwEntSipAgUserGroupRowStatus | read-create | current | This is used to create new rows in this table, modify existing rows, and to delete existing rows. |
| 1.3.6.1.4.1.2011.5.25.250.8.1.13 | ColumnhwEntSipAgUserGroupAdminStatus | read-create | current | Indicates the admin operation of the sip user group. Options: startservice(1) -start service endservice(2) -end service |
| 1.3.6.1.4.1.2011.5.25.250.8.1.14 | ColumnhwEntSipAgUserGroupRunningState | read-only | current | Indicates the service state of user group. Options: startSvc(1) -start service rBlock(2) -remote block lBlock(3) -local block |
| 1.3.6.1.4.1.2011.5.25.250.9 | TablehwEntSipAgSoftNumberParaTable | not-accessible | current | This table is used to config the soft number parameters of sipag. The indexes of this table are hwEntSipAgId, hwEntSipAgSoftNumberParaNo. |
| 1.3.6.1.4.1.2011.5.25.250.9.1 | RowhwEntSipAgSoftNumberParaEntry | not-accessible | current | This table is used to config the soft number parameters of sipag. The indexes of this entry are hwEntSipAgId, hwEntSipAgSoftNumberParaNo. |
| 1.3.6.1.4.1.2011.5.25.250.9.1.1 | ColumnhwEntSipAgSoftNumberParaId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.9.1.2 | ColumnhwEntSipAgSoftNumberParaNo | not-accessible | current | The number of sip mg soft number parameter. |
| 1.3.6.1.4.1.2011.5.25.250.9.1.3 | ColumnhwEntSipAgSoftNumberParaValue | read-write | current | The value of sip mg soft number parameter. |
| 1.3.6.1.4.1.2011.5.25.250.10 | TablehwEntSipAgSoftStringParaTable | not-accessible | current | This table is used to config the soft string Parameters of SIP interface. The indexes of this table are hwEntSipAgId, hwEntSipAgSoftStringParaNo. |
| 1.3.6.1.4.1.2011.5.25.250.10.1 | RowhwEntSipAgSoftStringParaEntry | not-accessible | current | This table is used to config the soft string parameters of sipag. The indexes of this entry are hwEntSipAgId, hwEntSipAgSoftStringParaNo. |
| 1.3.6.1.4.1.2011.5.25.250.10.1.1 | ColumnhwEntSipAgSoftStringParaId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.10.1.2 | ColumnhwEntSipAgSoftStringParaNo | not-accessible | current | The number of sip mg soft string parameter. |
| 1.3.6.1.4.1.2011.5.25.250.10.1.3 | ColumnhwEntSipAgSoftStringParaValue | read-write | current | The value of sip mg soft string parameter. |
| 1.3.6.1.4.1.2011.5.25.250.11 | TablehwEntSipAgSoftStringParaRunningTable | not-accessible | current | This table is used to query the running soft string parameters of sipag. The indexes of this table are hwEntSipAgId, hwEntSipAgSoftStringParaNo. |
| 1.3.6.1.4.1.2011.5.25.250.11.1 | RowhwEntSipAgSoftStringParaRunningEntry | not-accessible | current | This table is used to query the running soft string parameters of sipag. The indexes of this entry are hwEntSipAgId, hwEntSipAgSoftStringParaNo. |
| 1.3.6.1.4.1.2011.5.25.250.11.1.1 | ColumnhwEntSipAgSoftStringParaRunningId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.11.1.2 | ColumnhwEntSipAgSoftStringParaRunningNo | not-accessible | current | The number of sip mg soft string parameter. |
| 1.3.6.1.4.1.2011.5.25.250.11.1.3 | ColumnhwEntSipAgSoftStringParaRunningValue | read-only | current | The value of sip mg soft string parameter. |
| 1.3.6.1.4.1.2011.5.25.250.12 | TablehwEntFaxModemParaTable | not-accessible | current | This table is used to config the fax and modem parameters of sipag. The index of this table is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.12.1 | RowhwEntFaxModemParaEntry | not-accessible | current | This table is used to config the fax parameter. The index of this entry is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.12.1.1 | ColumnhwEntFaxSipAgId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.12.1.2 | ColumnhwEntFaxTransMode | read-write | current | Indicates the fax transmission mode. Options: thoroughly(1) -use voice codec t38(2) -use T.38 codec Default: thoroughly(1) |
| 1.3.6.1.4.1.2011.5.25.250.12.1.3 | ColumnhwEntModemTransMode | read-write | current | Indicates the modem transmission mode. Options: thoroughly(1) -Thoroughly transmission relay(2) -Relay mode Default: thoroughly(1) |
| 1.3.6.1.4.1.2011.5.25.250.12.1.4 | ColumnhwEntFaxModemNegoMode | read-write | current | Indicates the negotiate mode. Options: negotiate(1) -negotiate selfswitch(2) -do not negotiate Default: negotiate(1) |
| 1.3.6.1.4.1.2011.5.25.250.12.1.5 | ColumnhwEntFaxModemParaVbdCodec | read-write | current | Indicates the codec of VBD. Options: g711a(1) -G.711A g711u(2) -G.711U Default: g711a(1) |
| 1.3.6.1.4.1.2011.5.25.250.12.1.6 | ColumnhwEntFaxModemParaVbdPtType | read-write | current | Indicates the payload type of VBD. Options: static(1) -static payload type dynamic(2) -dynamic payload type Default: static(1) |
| 1.3.6.1.4.1.2011.5.25.250.12.1.7 | ColumnhwEntFaxModemVbdAttributeType | read-write | current | Indicate the format of session attribute lines when starting fax VBD negotiation. Options: v152(1) -v.152 format chinatelecom(2) -chinatelecom format chinatele… |
| 1.3.6.1.4.1.2011.5.25.250.12.1.8 | ColumnhwEntFaxModemRtpInterval | read-write | current | Indicates the default RTP packet time of DSP channel. Options: pt5ms(1) pt10ms(2) pt20ms(3) pt30ms(4) Default: pt10ms(2) |
| 1.3.6.1.4.1.2011.5.25.250.13 | TablehwEntDtmfParaTable | not-accessible | current | This table is used to config the DTMF parameter of sipag. The index of this table is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.13.1 | RowhwEntDtmfParaEntry | not-accessible | current | This table is used to config the DTMF parameter of sipag. The index of this entry is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.13.1.1 | ColumnhwEntDtmfSipAgId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.13.1.2 | ColumnhwEntDtmfTransMode | read-write | current | Indicates the transmission mode of DTMF. Options: thoroughly(1) -transparent transmission erase(2) -erase DTMF Default: thoroughly(1) |
| 1.3.6.1.4.1.2011.5.25.250.14 | TablehwEntNteTable | not-accessible | current | This table is used to config the nte parameter of sipag. The index of this table is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.14.1 | RowhwEntNteEntry | not-accessible | current | This table is used to config the nte parameter of sipag. The index of this entry is hwEntSipAgId.. |
| 1.3.6.1.4.1.2011.5.25.250.14.1.1 | ColumnhwEntNteSipAgId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.14.1.2 | ColumnhwEntNteNegoMode | read-write | current | Indicates the start mode of NTE. Options: negoStart(1) -negotiate start fixedStart(2) -fixed start noInitiativeStart(3) -no initiative start Default: noInitiat… |
| 1.3.6.1.4.1.2011.5.25.250.14.1.3 | ColumnhwEntNteFaxModem | read-write | current | Indicates the flag of fax and modem event using nte parameter. Options: enable(1) disable(2) Default: enable(1) |
| 1.3.6.1.4.1.2011.5.25.250.14.1.4 | ColumnhwEntNteFlashHook | read-write | current | Indicates the enabled flag of flash hook event using nte parameter. Options: enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.250.14.1.5 | ColumnhwEntNteDtmf | read-write | current | Indicates the enabled flag of dtmf using nte parameter. Options: enable(1) disable(2) Default: enable(1) |
| 1.3.6.1.4.1.2011.5.25.250.15 | TablehwEntRedundancyTable | not-accessible | current | This table is used to config the redundancy parameter. The index of this table is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.15.1 | RowhwEntRedundancyEntry | not-accessible | current | This table is used to config the redundancy parameter of sipag. The index of this entry is hwEntSipAgId. |
| 1.3.6.1.4.1.2011.5.25.250.15.1.1 | ColumnhwEntRedundancySipAgId | not-accessible | current | Sipag ID. |
| 1.3.6.1.4.1.2011.5.25.250.15.1.2 | ColumnhwEntRedundancyNegoMode | read-write | current | Indicates the start mode of the redundancy. Options: negoStart(1) -negotiate start fixedStart(2) -fixed start noInitiativeStart(3) -no initiative start Default… |
| 1.3.6.1.4.1.2011.5.25.250.15.1.3 | ColumnhwEntRedundancyStartMode | read-write | current | Indicates the start mode of the redundancy. Options: smartRedundancy(1) -smart start redundancy ordinaryRedundancy(2) -start redundancy ordinary Default: ordin… |
| 1.3.6.1.4.1.2011.5.25.250.15.1.4 | ColumnhwEntRedundancyNte | read-write | current | Indicates the enabled flag of NTE with using redundancy. Options: enable(1) disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.250.15.1.5 | ColumnhwEntRedundancyVbd | read-write | current | Indicates the enabled flag of the VBD using redundancy. Options: enable(1) disable(2) Default: enable(1) |
| 1.3.6.1.4.1.2011.5.25.250.15.1.6 | ColumnhwEntRedundancyVoice | read-write | current | Indicates the enabled flag of voice using redundancy. Options: 1. enable(1) 2. disable(2) Default: disable(2) |
| 1.3.6.1.4.1.2011.5.25.250.16 | NodehwEntVoiceSipagConformance | |||
| 1.3.6.1.4.1.2011.5.25.250.16.1 | NodehwEntVoiceSipagCompliances | |||
| 1.3.6.1.4.1.2011.5.25.250.16.1.1 | CompliancehwEntVoiceSipagCompliance | current | The compliance statement for systems supporting the this module. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2 | NodehwEntVoiceSipagGroups | |||
| 1.3.6.1.4.1.2011.5.25.250.16.2.1 | GrouphwEntSipAgConfigGroup | current | The hwEntSipAgConfig group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.2 | GrouphwEntSipAgRunningGroup | current | The hwEntSipAgRunning group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.3 | GrouphwEntSipAgProxyGroup | current | The hwEntSipAgProxy group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.4 | GrouphwEntSipAgProxyRunningGroup | current | The hwEntSipAgProxyRunning group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.5 | GrouphwEntSipProfileGroup | current | The hwEntSipProfile group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.6 | GrouphwEntSipSrvLogicGroup | current | The hwEntSipSrvLogic group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.7 | GrouphwEntSipAgDmmParaGroup | current | The hwEntSipAgDmmPara group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.8 | GrouphwEntSipAgUserGroupGroup | current | The hwEntSipAgUserGroup group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.9 | GrouphwEntSipAgSoftNumberParaGroup | current | The hwEntSipAgSoftNumberPara group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.10 | GrouphwEntSipAgSoftStringParaGroup | current | The hwEntSipAgSoftStringPara group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.11 | GrouphwEntSipAgSoftStringParaRunningGroup | current | The hwEntSipAgSoftStringParaRunningGroup group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.12 | GrouphwEntFaxModemParaGroup | current | The hwEntFaxModemPara group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.13 | GrouphwEntDtmfParaGroup | current | The hwEntDtmfPara group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.14 | GrouphwEntNteGroup | current | The hwEntNte group. | |
| 1.3.6.1.4.1.2011.5.25.250.16.2.15 | GrouphwEntRedundancyGroup | current | The hwEntRedundancy group. |