HUAWEI-EPONNNI-MIB
124 objects
The MIB is used for defining Huawei's EPON NNI management MIB objects.
Imported Objects
| HC-PerfHist-TC-MIB | HCPerfIntervalThreshold HCPerfTimeElapsed |
| HUAWEI-DEVICE-MIB | hwConfigChangeIP hwFrameIndex hwPortIndex hwSlotIndex |
| HUAWEI-MIB | huaweiMgmt huaweiUtility |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.119 | IdentityhwEponMIB | The MIB is used for defining Huawei's EPON NNI management MIB objects. | ||
| 1.3.6.1.4.1.2011.6.119.1 | NodehwEponnni | |||
| 1.3.6.1.4.1.2011.6.119.1.0 | NodehwEponnniNotifications | |||
| 1.3.6.1.4.1.2011.6.119.1.0.1 | NotificationhwEponnniLOSTrap | current | This trap is sent when LOS(Loss of Signal) EPON NNI line happened. | |
| 1.3.6.1.4.1.2011.6.119.1.0.2 | NotificationhwEponnniUnRegisterTrap | current | This trap is sent when unregistered event of EPON NNI happened. | |
| 1.3.6.1.4.1.2011.6.119.1.1 | NodehwEponnniCfg | |||
| 1.3.6.1.4.1.2011.6.119.1.1.1 | TablehwEponnniCfgTable | not-accessible | current | The table Eponnni config the EPON NNI, include manage EPON NNI, EPON NNI status information and inquire chipset. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1 | RowhwEponnniCfgEntry | not-accessible | current | The table Eponnni config the EPON NNI, include manage EPON NNI, EPON NNI status information and inquire chipset. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.1 | ColumnhwEponnniMgntLaserMode | read-write | current | Describes the laser mode, Options: 1. auto(0) - EPON NNI laser auto 2. off(1) - EPON NNI laser off 3. on(2) - EPON NNI laser on |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.2 | ColumnhwEponnniSubboardReset | read-write | current | Reset the sub board of EPON. Options: 1. reset(1) - Reset the sub board |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.3 | ColumnhwEponnniLinkStatus | read-only | current | Describes the port link status, Options: 1. linkDown(1) - Can't receive optic signal 2. linkUp(2) - Received optic signal |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.4 | ColumnhwEponnniRegStatus | read-only | current | Describes the port register status, Options: 1. registered(1) - The port is authenticated successfully 2. unregistered(2) - The port fails to be authenticated |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.5 | ColumnhwEponnniTxSpeed | read-only | current | The port up stream speed. Unit:Mbps |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.6 | ColumnhwEponnniRxSpeed | read-only | current | The port down stream speed. Unit:Mbps |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.7 | ColumnhwEponnniMac | read-only | current | The MAC address of EPON chipset. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.8 | ColumnhwEponnniHardwareVer | read-only | current | The hardware version of EPON chipset. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.9 | ColumnhwEponnniFirmwareVer | read-only | current | The firmware version of EPON chipset. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.10 | ColumnhwEponnniOamVer | read-only | current | The OAM version of EPON chipset. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.11 | ColumnhwEponnniTrafficBroadcast | read-write | current | Traffic Broadcast of Eponnni Port,0 is off, 13 is complete. Traffic suppression ID definition: NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps) … |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.12 | ColumnhwEponnniTrafficMulticast | read-write | current | Traffic Multicast of Eponnni Port,0 is off, 13 is complete. Traffic suppression ID definition: NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps) … |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.13 | ColumnhwEponnniTrafficUnknowncast | read-write | current | Traffic unicast of Eponnni Port,0 is off, 13 is complete. Traffic suppression ID definition: NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps) 1 … |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.14 | ColumnhwEponnniTxPower | read-only | current | The MDU TX power. It ranges from -10000 to 10000 units of 1/100 dBm. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.15 | ColumnhwEponnniRxPower | read-only | current | The MDU RX power. It ranges from -10000 to 10000 units of 1/100 dBm. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.16 | ColumnhwEponnniTemperature | read-only | current | The MDU Temperature. It ranges from -10000 to 10000 units of 1/100 C. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.17 | ColumnhwEponnniBiasCurrent | read-only | current | The MDU Laser Bias Electricity. It ranges from -10000 to 10000 units of 1/100 mA. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.18 | ColumnhwEponnniVoltage | read-only | current | The MDU Voltage. It ranges from -10000 to 10000 units of 1/100 mV. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.19 | ColumnhwEponnniPassword | read-write | current | The password of the EPON ONU. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.20 | ColumnhwEponnniOnuRogueOntState | read-only | current | Indicates whether the optical port is shut down due to the continuous mode(rogue ONT). Options: 1. yes(1) - Port is shut down due to the continuous mode 2. no(… |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.21 | ColumnhwEponnniActiveStatus | read-only | current | Describes the EPONNNI port TYPED protect state. Options: 1. active(1) - Active state 2. standby(2) - Standby state |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.22 | ColumnhwEponNniKeyLoid | read-write | current | The loid of the EPON ONU. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.23 | ColumnhwEponNniKeyCheckCode | read-write | current | The checkcode of the EPON ONU. |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.24 | ColumnhwEponnniOpticsModuleType | read-only | current | This object indicates the type of the optical transceiver. Options: 1. unknown(1) - Unknow 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. gpon… |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.25 | ColumnhwEponnniOpticsModuleSubType | read-only | current | This object indicates the sub type of the optical transceiver. Options: 1.unknown(1) - Unknow 2.classbplus(101) - CLASS B+ 3.classcplus(102) - CLASS C+ 4.class… |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.26 | ColumnhwEponnniOpticsModuleUsedType | read-only | current | This object indicates the application scenario of the optical transceiver. Options: 1.unknown(1) - Unknow 2.olt(2) - OLT 3.ont(3) - ONT, This enumeration is ob… |
| 1.3.6.1.4.1.2011.6.119.1.1.1.1.27 | ColumnhwEponnniOpticsModuleEncapsulationType | read-only | current | This object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF … |
| 1.3.6.1.4.1.2011.6.119.1.2 | NodehwEponnniStatistics | |||
| 1.3.6.1.4.1.2011.6.119.1.2.1 | TablehwEponnniStatisticsTable | not-accessible | current | This table is used to query the statistics of the EPON port. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1 | RowhwEponnniStatisticsEntry | not-accessible | current | This table is used to query the statistics of the EPON port. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.1 | ColumnhwEponnniPonTxFramesCnt | read-only | current | The PON port send OK frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.2 | ColumnhwEponnniPonRxFramesCnt | read-only | current | The PON received OK frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.3 | ColumnhwEponnniPonRxFECErrFramesCnt | read-only | current | The PON received FEC error frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.4 | ColumnhwEponnniPonRxHECErrFramesCnt | read-only | current | The PON received HEC error frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.5 | ColumnhwEponnniPonTxPQDropFramesCnt | read-only | current | The PON send PQ drop frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.6 | ColumnhwEPonnniUniTxFramesCnt | read-only | current | The UNI send OK frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.7 | ColumnhwEPonnniUniRxFramesCnt | read-only | current | The UNI received OK frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.8 | ColumnhwEponnniUniRxFECErrFramesCnt | read-only | current | The UNI received FEC error frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.9 | ColumnhwEponnniUniTxPQDropFramesCnt | read-only | current | The UNI send PQ drop frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.10 | ColumnhwEponnniStatisticsClear | read-write | current | Clear the statistics of EPON NNI, Options: 1. resetStat(1) - Clear the statistics |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.11 | ColumnhwEponnniUniTxOkOctetsCnt | read-only | current | The UNI send OK Bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.12 | ColumnhwEponnniUniRxOkOctetsCnt | read-only | current | The UNI received OK Bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.13 | ColumnhwEponniRxUnicastFrames | read-only | current | The PON received unicast frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.14 | ColumnhwEponniRxMulticastFrames | read-only | current | The PON received multicast frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.15 | ColumnhwEponniRxBroadcastFrames | read-only | current | The PON received broadcast frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.16 | ColumnhwEponniRx64BytesFrames | read-only | current | The PON received frames of 64 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.17 | ColumnhwEponniRx65to127BytesFrames | read-only | current | The PON received frames of 65~127 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.18 | ColumnhwEponniRx128to255BytesFrames | read-only | current | The PON received frames of 128~255 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.19 | ColumnhwEponniRx256to511BytesFrames | read-only | current | The PON received frames of 256~511 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.20 | ColumnhwEponniRx512to1023BytesFrames | read-only | current | The PON received frames of 512~1023 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.21 | ColumnhwEponniRx1024to1518BytesFrames | read-only | current | The PON received frames of 1024~1518 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.22 | ColumnhwEponniRxOver1518BytesFrames | read-only | current | The PON received frames of over 1518 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.23 | ColumnhwEponniRxUndersizeFrames | read-only | current | The PON received under size frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.24 | ColumnhwEponniRxOversizeFrames | read-only | current | The PON received over size frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.25 | ColumnhwEponniRxCrcErrorFrames | read-only | current | The PON received crc error frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.26 | ColumnhwEponniRxDiscardedFrames | read-only | current | The PON received discarded frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.27 | ColumnhwEponniTxUnicastFrames | read-only | current | The PON send unicast frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.28 | ColumnhwEponniTxMulticastFrames | read-only | current | The PON send multicast frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.29 | ColumnhwEponniTxBroadcastFrames | read-only | current | The PON send broadcast frames. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.30 | ColumnhwEponniTx64BytesFrames | read-only | current | The PON send frames of 64 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.31 | ColumnhwEponniTx65to127BytesFrames | read-only | current | The PON send frames of 65~127 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.32 | ColumnhwEponniTx128to255BytesFrames | read-only | current | The PON send frames of 128~255 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.33 | ColumnhwEponniTx256to511BytesFrames | read-only | current | The PON send frames of 256~511 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.34 | ColumnhwEponniTx512to1023BytesFrames | read-only | current | The PON send frames of 512~1023 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.35 | ColumnhwEponniTx1024to1518BytesFrames | read-only | current | The PON send frames of 1024~1518 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.36 | ColumnhwEponniTxOver1518BytesFrames | read-only | current | The PON send frames of over 1518 bytes. |
| 1.3.6.1.4.1.2011.6.119.1.2.1.1.37 | ColumnhwEponnniPonRxErrFramesCnt | read-only | current | The PON received error frames. |
| 1.3.6.1.4.1.2011.6.119.1.3 | NodehwEponNniHistoryStats | |||
| 1.3.6.1.4.1.2011.6.119.1.3.1 | TablehwEponNniHistoryStatsTable | not-accessible | current | This table provides the performance statistics of the EPON port: current 24-hour performance statistics, history 30 24-hour performance statistics, current 15-… |
| 1.3.6.1.4.1.2011.6.119.1.3.1.1 | RowhwEponNniHistoryStatsEntry | not-accessible | current | This table provides the performance statistics of the EPON port: current 24-hour performance statistics, history 30 24-hour performance statistics, current 15-… |
| 1.3.6.1.4.1.2011.6.119.1.3.1.1.1 | ColumnhwEponStatsIntervalType | not-accessible | current | Describes the type of EponNni History Statistic, Options: 1. intervaltime15min(0) - The EponNNI History Statistic in 15 minutes 2. intervaltime24h(1) - The Epo… |
| 1.3.6.1.4.1.2011.6.119.1.3.1.1.2 | ColumnhwEponStatsIntervalNum | not-accessible | current | The interval number of EponNni History Statistic. When IntervalType is 15 minutes, IntervalNum is 0 - 96. When IntervalType is 24 hours, IntervalNum is 0 - 30.… |
| 1.3.6.1.4.1.2011.6.119.1.3.1.1.3 | ColumnhwEponStatsRxMPCP | read-only | current | Number of received MPCP frames. |
| 1.3.6.1.4.1.2011.6.119.1.3.1.1.4 | ColumnhwEponStatsRxOAMPDU | read-only | current | Number of received OAMPDU frames. |
| 1.3.6.1.4.1.2011.6.119.1.3.1.1.5 | ColumnhwEponStatsRxOctets | read-only | current | Total number of received octets. |
| 1.3.6.1.4.1.2011.6.119.1.3.1.1.6 | ColumnhwEponStatsRxPkts | read-only | current | Total number of received frames. |
| 1.3.6.1.4.1.2011.6.119.1.3.1.1.7 | ColumnhwEponStatsTxOctets | read-only | current | Total number of transmited octets. |
| 1.3.6.1.4.1.2011.6.119.1.3.1.1.8 | ColumnhwEponStatsTxPkts | read-only | current | Total number of transmited frames. |
| 1.3.6.1.4.1.2011.6.119.1.3.1.1.9 | ColumnhwTimeElapsed | read-only | current | Indicates the data statistic seconds in this period. This leaf object is valid when IntervalNum is 0 (namely, the current 15 minutes and the current 24 hours). |
| 1.3.6.1.4.1.2011.6.119.1.3.1.1.10 | ColumnhwValidInterval | read-only | current | Whether the interval number is valid. |
| 1.3.6.1.4.1.2011.6.119.1.4 | NodehwEponnniAlarmThreshold | |||
| 1.3.6.1.4.1.2011.6.119.1.4.1 | TablehwEponnniAlarmThresholdTable | not-accessible | current | The table EponNni optical module alarm threshold.This table is used to set and query the low alarm threshold, the high alarm threshold of eponnni. The index of… |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1 | RowhwEponnniAlarmThresholdEntry | not-accessible | current | The table EponNni optical module alarm threshold. This table is used to set and query the low alarm threshold, the high alarm threshold of eponnni. The index o… |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1.1 | ColumnhwEponnniRxPowerUpperThreshold | read-write | current | The MDU Rx-power upper limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm. |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1.2 | ColumnhwEponnniRxPowerLowerThreshold | read-write | current | The MDU Rx-power lower limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm. |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1.3 | ColumnhwEponnniTxPowerUpperThreshold | read-write | current | The MDU Tx-power upper limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm. |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1.4 | ColumnhwEponnniTxPowerLowerThreshold | read-write | current | The MDU Tx-power lower limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm. |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1.5 | ColumnhwEponnniBiasUpperThreshold | read-write | current | The MDU Bias upper limit threshold. It ranges from 0 to 10000 units of mA. |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1.6 | ColumnhwEponnniBiasLowerThreshold | read-write | current | The MDU Bias lower limit threshold. It ranges from 0 to 10000 units of mA. |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1.7 | ColumnhwEponnniTemperatureUpperThreshold | read-write | current | The MDU Temperature upper limit threshold. It ranges from -9900 to 30000 units of 1/100 C. |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1.8 | ColumnhwEponnniTemperatureLowerThreshold | read-write | current | The MDU Temperature lower limit threshold. It ranges from -9900 to 30000 units of 1/100 C. |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1.9 | ColumnhwEponnniVoltageUpperThreshold | read-write | current | The MDU Voltage upper limit threshold. It ranges from 0 to 10000 units of 1/100 V. |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1.10 | ColumnhwEponnniVoltageLowerThreshold | read-write | current | The MDU Voltage lower limit threshold. It ranges from 0 to 10000 units of 1/100 V. |
| 1.3.6.1.4.1.2011.6.119.1.4.1.1.11 | ColumnhwEponnniClearThreshold | read-write | current | Clear the MDU threshold. Options: 1. invalid(0) - The MDU threshold clear state is invalid. 2. clear(1) - Clear the MDU threshold. 3. cleared(32767) - The MDU … |
| 1.3.6.1.4.1.2011.6.119.2 | NodehwEponnniTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.119.2.1 | ScalarhwEponNNITrapSerialNo | accessible-for-notify | current | Serial No. of EponNNI trap. |
| 1.3.6.1.4.1.2011.6.119.2.2 | ScalarhwEponNNITrapOperType | accessible-for-notify | current | Operation type of EponNNI trap. |
| 1.3.6.1.4.1.2011.6.119.3 | NodehwEponnniCommonTraps | |||
| 1.3.6.1.4.1.2011.6.119.3.0 | NodehwEponnniCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.119.3.0.1 | NotificationhwEponnniTypeDPortSwitchTrap | current | TypeD port switch trap. The first ifIndex is the active one after switching over. The second ifIndex is the standby one after switching over. The hwEponnniType… | |
| 1.3.6.1.4.1.2011.6.119.3.0.2 | NotificationhwEponnniAuthChangeTrap | current | The hwEponnniAuthChangeTrap will be sent when the authentication information changes. | |
| 1.3.6.1.4.1.2011.6.119.4 | NodehwEponnniAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.119.4.0 | NodehwEponnniAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.119.4.0.1 | NotificationhwEponnniOntRogueOntFailAlarmTrap | current | Rogue ONT fail trap. EPON ONU was identified as rogue ONU, because it gave out light in the incorrect time. The notification indicates alarm when optical modul… | |
| 1.3.6.1.4.1.2011.6.119.4.0.2 | NotificationhwEponnniOntRogueOntRestoreAlarmTrap | current | EPON ONU's optical module send laser recovery trap. The notification indicates alarm when EPON ONU's optical module sent laser recovery. | |
| 1.3.6.1.4.1.2011.6.119.4.0.3 | NotificationhwEponnniTempeExceedThreAlarmTrap | current | The temperature of EPON optical module exceeded threshold trap. The notification indicates alarm when the temperature of EPON optical module exceeded alarm thr… | |
| 1.3.6.1.4.1.2011.6.119.4.0.4 | NotificationhwEponnniTempeExceedThreRestoreAlarmTrap | current | The temperature of EPON optical module exceeded threshold recovery trap. The notification indicates alarm when the temperature of EPON optical module exceeded … | |
| 1.3.6.1.4.1.2011.6.119.4.0.5 | NotificationhwEponnniVoltExceedThreAlarmTrap | current | The voltage of EPON ONU's optical-module exceeded alarm threshold trap. The notification indicates alarm when voltage of EPON ONU's optical-module exceeded ala… | |
| 1.3.6.1.4.1.2011.6.119.4.0.6 | NotificationhwEponnniVoltExceedThreRestoreAlarmTrap | current | The voltage of EPON ONU's optical-module exceeded alarm threshold recovery trap. The notification indicates alarm when voltage of EPON ONU's optical-module exc… | |
| 1.3.6.1.4.1.2011.6.119.4.0.7 | NotificationhwEponnniBiasExceedThreAlarmTrap | current | The bias of EPON ONU's optical module exceeded alarm threshold trap. The notification indicates alarm when the bias of EPON ONU's optical module exceeded alarm… | |
| 1.3.6.1.4.1.2011.6.119.4.0.8 | NotificationhwEponnniBiasExceedThreRestoreAlarmTrap | current | The bias of EPON ONU's optical module exceeded alarm threshold recovery trap. The notification indicates alarm when the bias of EPON ONU's optical module excee… | |
| 1.3.6.1.4.1.2011.6.119.4.0.9 | NotificationhwEponnniTxPowerExceedThreAlarmTrap | current | The tx-power of EPON ONU's optical module exceeded alarm threshold trap. The notification indicates alarm when the Tx Power of EPON ONU's optical module exceed… | |
| 1.3.6.1.4.1.2011.6.119.4.0.10 | NotificationhwEponnniTxPowerExceedThreRestoreRestoreAlarmTrap | current | The tx-power of EPON ONU's optical module exceeded alarm threshold recovery trap. The notification indicates alarm when the tx-power of EPON ONU's optical modu… | |
| 1.3.6.1.4.1.2011.6.119.4.0.11 | NotificationhwEponnniRxPowerExceedThreAlarmTrap | current | The rx-power of EPON ONU's optical-module exceeded alarm threshold trap. The notification indicates alarm when the rx-power of EPON ONU's optical-module exceed… | |
| 1.3.6.1.4.1.2011.6.119.4.0.12 | NotificationhwEponnniRxPowerExceedThreRestoreAlarmTrap | current | The rx-power of EPON ONU's optical-module exceeded alarm threshold recovery trap. The notification indicates alarm when the rx-power of EPON ONU's optical-modu… | |
| 1.3.6.1.4.1.2011.6.119.4.0.13 | NotificationhwEponnniPortSwitchAlarmTrap | current | Port switch trap. The notification indicates alarm when the protection switchover occurs on the PON port and it has no effect on the service. |