HUAWEI-FIREWALL-MIB
115 objects
The MIB contains objects of firewall , referencing the draft-grall-firewall-mib-01.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndexOrZero |
| Q-BRIDGE-MIB | PortList |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.222 | IdentityhwFirewallMIB | The MIB contains objects of firewall , referencing the draft-grall-firewall-mib-01. | ||
| 1.3.6.1.4.1.2011.5.25.222.1 | NodehwFirewallMIBObjects | |||
| 1.3.6.1.4.1.2011.5.25.222.1.1 | NodehwFwEvents | |||
| 1.3.6.1.4.1.2011.5.25.222.1.1.2 | NodehwFwNetEvents | |||
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.1 | ScalarhwFwNetEventsTableLastRow | read-only | current | The index value of the last row in the hwFwNetEventsTable. This number starts at 1 and increase by one with each new log entry. When this number wraps, all eve… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.3 | NodehwFwBasicEvents | |||
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.3.1 | ScalarhwFwBasicEventsTableLastRow | read-only | current | The index value of the most recently created row in the cfwBasicEventsTable. This number starts at 1 and increase by one with each new log entry. When this num… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.3.2 | TablehwFwBasicEventsTable | not-accessible | current | Table of basic data for firewall events. The agent may choose to delete the instances of cfwBasicEventsEntry as required because of lack of memory. The oldest … |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.3.2.1 | RowhwFwBasicEventsEntry | not-accessible | current | An entry in the table, containing general information about an event. This table will always be sparse, i.e., each row will instanciate only a subet of the col… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.3.2.1.1 | ColumnhwFwBasicEventIndex | not-accessible | current | An index that uniquely identifies an entry in the log table. These indices are assigned beginning with 1 and increase by one with each new event logged. |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.3.2.1.2 | ColumnhwFwBasicEventTime | read-only | current | The time that the event occurred. |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.3.2.1.3 | ColumnhwFwBasicSecurityEventType | read-only | current | The type of security-related event that this row contains. If the event is not security-related this object will not be instantiated. |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.3.2.1.4 | ColumnhwFwBasicEventDescription | read-only | current | A description of the event. The value of the object may be a zero-length string. |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.3.2.1.5 | ColumnhwFwBasicEventDetailsTableRow | read-only | current | A pointer to a row in the table containing details about this event. Generally, the table will be the cfwNetEventsTable but a Cisco-defined table may also appe… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4 | TablehwFwNetEventsTable | not-accessible | current | Table of detailed data for network events. The agent may choose to delete the instances of hwFwBasicEventsEntry as required because of lack of memory. It is an… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1 | RowhwFwNetEventsEntry | not-accessible | current | An entry in the table, containing detailed information about an event. Note that this table may be sparse. If Network Address Translation is not enabled hwFwNe… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.1 | ColumnhwFwNetEventIndex | not-accessible | current | An index that uniquely identifies an entry in the log table. These indices are assigned beginning with one and increase by one with each new log entry. When th… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.2 | ColumnhwFwNetEventInterface | read-only | current | The interface most closely associated with this event. For example, for an event that relates to the receipt of a packet, this object identifies the interface … |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.3 | ColumnhwFwNetEventSrcVrfName | read-only | current | This object indicates the VRF's name. |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.4 | ColumnhwFwNetEventSrcIpAddress | read-only | current | Source IP address in the IP packet that caused the event. If there is no packet associated with the event this object has the value of zero. If the event is th… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.5 | ColumnhwFwNetEventInsideSrcIpAddress | read-only | current | Source IP address after Network Address Translation has been applied. If NAT has not been applied to the source address in this packet this object will not be … |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.6 | ColumnhwFwNetEventDstVrfName | read-only | current | This object indicates the VRF's name. |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.7 | ColumnhwFwNetEventDstIpAddress | read-only | current | Destination IP address in the IP packet that caused the event. If there is no packet associated with the event this object has the value of zero. If the event … |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.8 | ColumnhwFwNetEventInsideDstIpAddress | read-only | current | Destination IP address after Network Address Translation has been applied. If NAT has not been applied to the destination address in this packet this object wi… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.9 | ColumnhwFwNetEventSrcIpPort | read-only | current | Source UDP/TCP port in the IP packet that caused the event. If there is no packet associated with the event this object has the value of zero. If the event is … |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.10 | ColumnhwFwNetEventInsideSrcIpPort | read-only | current | Source UDP/TCP port after Port Address Translation has been applied. If PAT has not been applied to the source port in this packet this object will not be inst… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.11 | ColumnhwFwNetEventDstIpPort | read-only | current | Destination UDP/TCP port in the IP packet that caused the event. If there is no packet associated with the event this object has the value of zero. If the even… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.12 | ColumnhwFwNetEventInsideDstIpPort | read-only | current | Destination UDP/TCP port after Port Address Translation has been applied. If PAT has not been applied to the Destination port in this packet this object will n… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.13 | ColumnhwFwNetEventService | read-only | current | The identification of the type of service involved with this event. |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.14 | ColumnhwFwNetEventServiceInformation | read-only | current | Specific service information. This can be used to describe the particular service indentified by hwFwNetEventService and can reflect whether the service is a l… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.15 | ColumnhwFwNetEventIdentity | read-only | current | This object will contain a description of the entity that caused the event. The entity could be a userid, username, processid or other identifier for the entit… |
| 1.3.6.1.4.1.2011.5.25.222.1.1.2.4.1.16 | ColumnhwFwNetEventDescription | read-only | current | A detailed description of the event. |
| 1.3.6.1.4.1.2011.5.25.222.1.2 | NodehwFwSystem | |||
| 1.3.6.1.4.1.2011.5.25.222.1.2.2 | NodehwFwStatistics | |||
| 1.3.6.1.4.1.2011.5.25.222.1.2.2.2 | TablehwFwConnectionStatTable | not-accessible | current | Table of firewall statistic instances. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.2.2.1 | RowhwFwConnectionStatEntry | not-accessible | current | An entry in the table, containing information about a firewall statistic. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.2.2.1.1 | ColumnhwFwConnectionStatService | not-accessible | current | The identification of the type of connection providing statistics. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.2.2.1.2 | ColumnhwFwConnectionStatType | not-accessible | current | The state of the connections that this row contains statistics for. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.2.2.1.3 | ColumnhwFwConnectionStatDescription | read-only | current | A detailed textual description of this statistic. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.2.2.1.4 | ColumnhwFwConnectionStatCount | read-only | current | This is an integer that contains the value of the resource statistic. If a type of 'gauge' is more appropriate this object will be omitted resulting in a spars… |
| 1.3.6.1.4.1.2011.5.25.222.1.2.3 | NodehwFwZone | |||
| 1.3.6.1.4.1.2011.5.25.222.1.2.3.1 | ScalarhwFwZoneNumOfEntries | read-only | current | This object maintains a count of the number of entries that currently exist in the hwFwZoneTable. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.3.2 | TablehwFwZoneTable | not-accessible | current | Table of firewall zone instances. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.3.2.1 | RowhwFwZoneEntry | not-accessible | current | An entry in the table, containing information about a firewall zone. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.3.2.1.1 | ColumnhwFwZoneIndex | not-accessible | current | This object represents the name of a firewall zone. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.3.2.1.2 | ColumnhwFwZoneName | read-only | current | This object represents the name of a firewall zone. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.3.2.1.3 | ColumnhwFwZonePriority | read-only | current | This object represents the priority of a firewall zone. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.3.2.1.4 | ColumnhwFwZoneIfList | read-only | current | The set of interface which belong to the firewall zone. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.3.2.1.5 | ColumnhwFwZoneIfNum | read-only | current | The number of interface in this firewall zone. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4 | NodehwFwInterZone | |||
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.1 | ScalarhwFwInterZoneNumOfEntries | read-only | current | This object maintains a count of the number of entries that currently exist in the hwFwInterZoneTable. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2 | TablehwFwInterZoneTable | not-accessible | current | Table of firewall Interzone instances. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1 | RowhwFwInterZoneEntry | not-accessible | current | An entry in the table, containing information about a firewall Interzone. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.1 | ColumnhwFwInterZoneIndex | not-accessible | current | Index of the firewall interzone. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.2 | ColumnhwFwInterZoneName | read-only | current | This object represents the name of a firewall Interzone. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.3 | ColumnhwFwInterZoneEnable | read-write | current | Enable or disable firewall on interzone, and show firewall status on interzone. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.4 | ColumnhwFwInterZonePktFltInDefaultRule | read-only | current | Default rule of the packet filtering that the direction is inbound. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.5 | ColumnhwFwInterZonePktFltInAcl | read-only | current | Basic or advanced acl number of the packet filtering that the direction is inbound. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.6 | ColumnhwFwInterZonePktFltInMacAcl | read-only | current | Layer 2 acl number of the packet filtering that the direction is inbound. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.7 | ColumnhwFwInterZonePktFltOutDefaultRule | read-only | current | Default rule of the packet filtering that the direction is outbound. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.8 | ColumnhwFwInterZonePktFltOutAcl | read-only | current | Basic or advanced acl number of the packet filtering that the direction is outbound. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.9 | ColumnhwFwInterZonePktFltOutMacAcl | read-only | current | Layer 2 acl number of the packet filtering that the direction is outbound. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.10 | ColumnhwFwInterZoneAspf | read-only | current | Type of protocol enabled aspf in this Interzone. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.11 | ColumnhwFwInterZoneSessLogInAcl | read-only | current | Acl number of interzone session log for inbound. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.4.2.1.12 | ColumnhwFwInterZoneSessLogOutAcl | read-only | current | Acl number of interzone session log for outbound. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5 | NodehwFwLog | |||
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.1 | ScalarhwFwBlackListLogStatus | read-only | current | Whether blacklist log is enabled. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.2 | ScalarhwFwBlackListLogInterval | read-only | current | Interval of blacklist log. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.3 | ScalarhwFwDefendLogStatus | read-only | current | Whether defend log is enabled. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.4 | ScalarhwFwDefendLogInterval | read-only | current | Interval of defend log. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.5 | ScalarhwFwStatisticLogStatus | read-only | current | Whether statistic log is enabled. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.6 | ScalarhwFwStatisticLogInterval | read-only | current | Interval of statistic log. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.7 | ScalarhwFwSessionLogStatus | read-only | current | Whether session log is enabled. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.8 | ScalarhwFwSessionLogInterval | read-only | current | Interval of session log. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.9 | ScalarhwFwSessionNatLogStatus | read-only | current | Whether session nat log is enabled. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.10 | ScalarhwFwSessionOutBandLogStatus | read-only | current | Whether the out-of-band mode of sending log is enabled. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.11 | ScalarhwFwBinaryLogStatus | read-only | current | Whether binary log is enabled. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.12 | ScalarhwFwBinaryLogHostAddr | read-only | current | IP address of log server. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.13 | ScalarhwFwBinaryLogHostPort | read-only | current | Port number of log server. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.14 | ScalarhwFwBinaryLogSrcAddr | read-only | current | IP address used by the device to communicate with the log server. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.15 | ScalarhwFwBinaryLogSrcPort | read-only | current | Port number used by the device to communicate with the log server. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.5.16 | ScalarhwFwBinaryLogVpnName | read-only | current | Name of vpn-instance. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.7 | NodehwFwProtoAgingTime | |||
| 1.3.6.1.4.1.2011.5.25.222.1.2.7.1 | ScalarhwFwSipAgingTime | read-only | current | Aging time for Sip stream. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.7.2 | ScalarhwFwSipMediaAgingTime | read-only | current | Aging time for Sip media stream. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.7.3 | ScalarhwFwRtspAgingTime | read-only | current | Aging time for Rtsp stream. |
| 1.3.6.1.4.1.2011.5.25.222.1.2.7.4 | ScalarhwFwRtspMediaAgingTime | read-only | current | Aging time for Rtsp media stream. |
| 1.3.6.1.4.1.2011.5.25.222.1.3 | NodehwFirewallMIBNotifications | |||
| 1.3.6.1.4.1.2011.5.25.222.1.3.2 | NotificationhwFwSecurityNotification | current | This notification is used for events involving security events. The included objects provide more detailed information about the event. | |
| 1.3.6.1.4.1.2011.5.25.222.1.3.3 | NotificationhwFwInterzoneStatusNotification | current | This notification is used for events involving security events. Send out firewall enable or disable event in Interzone. | |
| 1.3.6.1.4.1.2011.5.25.222.3 | NodehwFirewallMIBConformance | |||
| 1.3.6.1.4.1.2011.5.25.222.3.1 | NodehwFirewallMIBCompliances | |||
| 1.3.6.1.4.1.2011.5.25.222.3.1.1 | CompliancehwFirewallMIBCompliance | current | The compliance statement for entities which implement the hwFirewallMIB. | |
| 1.3.6.1.4.1.2011.5.25.222.3.2 | NodehwFirewallMIBGroups | |||
| 1.3.6.1.4.1.2011.5.25.222.3.2.1 | GrouphwFirewallMIBEventsGroup | current | Firewall events | |
| 1.3.6.1.4.1.2011.5.25.222.3.2.2 | GrouphwFirewallMIBStatisticsGroup | current | Firewall statistics | |
| 1.3.6.1.4.1.2011.5.25.222.3.2.3 | GrouphwFirewallMIBNotificationGroup | obsolete | Firewall Notifications | |
| 1.3.6.1.4.1.2011.5.25.222.3.2.4 | GrouphwFirewallMIBNotificationGroupRev1 | current | Firewall Notifications | |
| 1.3.6.1.4.1.2011.5.25.222.3.2.5 | GrouphwFirewallMIBZoneGroup | current | This is the firewall zone group. | |
| 1.3.6.1.4.1.2011.5.25.222.3.2.6 | GrouphwFirewallMIBInterZoneGroup | current | This is the firewall interzone group. | |
| 1.3.6.1.4.1.2011.5.25.222.3.2.7 | GrouphwFirewallMIBLogGroup | current | This is the firewall log group. | |
| 1.3.6.1.4.1.2011.5.25.222.3.2.8 | GrouphwFirewallMIBAgingTimeGroup | current | This is the firewall Aging time group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AccessEvent | INTEGER { other(1), grant(2), deny(3), denyMult(4), error(5) } | current | This textual convention is used to describe various events and statistics that are related to the access control on a firewall. other : Miscellaneous access event. grant : A service has allowed access based on all of it… |
| AspfProto | INTEGER { ftp(1), http(2), httpJavaBlock(3), httpActiveXBlock(4), sip(5), rstp(6) } | current | Protocol enabled ASPF check function in interzone. |
| AuthenticationEvent | INTEGER { other(1), succ(2), error(3), fail(4), succPriv(5), failPriv(6), failMult(7) } | current | This textual convention is used to describe various events and statistics that are related to authorization. other : Miscellaneous authentication event. succ : A client successfuly authenticated. error : Error while aut… |
| ConnectionEvent | INTEGER { other(1), accept(2), error(3), drop(4), close(5), timeout(6), refused(7), reset(8), noResp(9) } | current | This textual convention is used to describe various events and statistics that are related to the connections that occur on a firewall. other : A generic connection event. accept : A connection has been acccepted. error… |
| ConnectionStat | INTEGER { totalOpen(1), currentOpen(2), currentHalfOpen(3), remote(4), high(5) } | current | This textual convention is used to describe various connections statistics. totalOpen : Total open connections since reboot. currentOpen : The number of connections currently open. currentHalfOpen : The number of connec… |
| ContentInspectionEvent | INTEGER { other(1), okay(2), error(3), found(4), clean(5), reject(6), saved(7) } | current | Content inspection events, these events report that something was found in the application payload. The details entry in the event can report on what was found (eg., virus, company private info., etc), what it was found… |
| GenericEvent | INTEGER { abnormal(1), okay(2), error(3) } | current | Generic Events : events for which there is no more specific enumeration abnormal : An abnormal event has occurred that is neither 'okay' nor an 'error'. okay : A normal event occurred or the system has changed from an a… |
| Hardware | INTEGER { memory(1), disk(2), power(3), netInterface(4), cpu(5), primaryUnit(6), secondaryUnit(7), other(8) } | current | This textual convention is used to describe various hardware resouces that can be monitored by the firewall. memory : identifies memory. disk : identifies disk. power : identifies power. netInterface : identifies a netw… |
| HardwareStatus | INTEGER { other(1), up(2), down(3), error(4), overTemp(5), busy(6), noMedia(7), backup(8), active(9), standby(10) } | current | This textual convention is used to describe various events that are related to the resources on a firewall. other : Generic resource event. up : The resource is in service. down : The resource is not in service. error :… |
| PktFltDefaultRule | INTEGER { permit(1), deny(2) } | current | Default rule of the packet filtering. permit : Allows all packets to pass. deny : Rejects all packets. |
| ResourceStatistics | INTEGER { highUse(1), highLoad(2), maximum(3), minimum(4), low(5), high(6), average(7), free(8), inUse(9) } | current | This textual convention is used to identify various statistics that are related to the resources on a firewall. highUse : The highest load the resource has had for a time period. The time period will be implementation d… |
| SecurityEvent | INTEGER { attack(1), atkTerm(2), blklstAdd(3), blklstDel(4) } | current | This textual convention is used to describe various security-related events and statistics on a firewall. attack : A packet forwarding attack has been detected. atkTerm : An attack has terminated blklstAdd : A black lis… |
| Services | INTEGER { protoIcmp(1), protoTcp(2), protoUdp(3) } | current | This textual convention is used to describe various services that are monitored by the firewall. protoIcmp : identifies ICMP, Internet Control Message Protocol. protoTcp : identifies TCP, Transmission Control Protocol. … |