HUAWEI-IPDSLAM-ACLV6-MIB
64 objects
The MIB is used for configuring IPv6 ACL rules.An access control list (ACL) is used to filter the specified data packets according to a series of matching rules configured in the ACL packets so that undesired data packets can be identified. By using the matching rules, network devices can permit or deny the matching data packets to pass.
Imported Objects
| HUAWEI-MIB | huaweiMgmt |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.112 | IdentityhwAclv6 | The MIB is used for configuring IPv6 ACL rules.An access control list (ACL) is used to filter the specified data packets according to a series of matching rule… | ||
| 1.3.6.1.4.1.2011.5.112.1 | NodehwAclv6MibObject | |||
| 1.3.6.1.4.1.2011.5.112.1.1 | TablehwAclv6NumGroupTable | not-accessible | current | Describes the configured ACLv6 groups in the system and basic information about each group, such as the number of rules, steps, and descriptions. The index of … |
| 1.3.6.1.4.1.2011.5.112.1.1.1 | RowhwAclv6NumGroupEntry | not-accessible | current | Describes the configured ACLv6 groups in the system and basic information about each group, such as the number of rules, steps, and descriptions. The index of … |
| 1.3.6.1.4.1.2011.5.112.1.1.1.1 | ColumnhwAclv6NumGroupAclNum | not-accessible | current | The index of this hwAclv6NumGroupTable. Uniquely identifies an ACLv6 group. Value range: 2000-3999,4294967295 The groups with indexes ranging from 2000 to 2999… |
| 1.3.6.1.4.1.2011.5.112.1.1.1.2 | ColumnhwAclv6NumGroupMatchOrder | read-only | current | Indicates the priority order of an ACLv6 group. Options: 1. config(1) -the priority order of an ACLv6 group is configuration order 2. auto(2) -the priority ord… |
| 1.3.6.1.4.1.2011.5.112.1.1.1.3 | ColumnhwAclv6NumGroupSubitemNum | read-only | current | Indicates the number of rules in an ACLv6 group. This leaf is read-only. The value increases by one when a rule is added to the ACLv6 group. |
| 1.3.6.1.4.1.2011.5.112.1.1.1.4 | ColumnhwAclv6NumGroupStep | read-create | current | Indicates the step of adding rules to an ACLv6 group. Range: 1-20 When a rule is added and its ID is not specified, the ID of the rule is: step+last rule ID/st… |
| 1.3.6.1.4.1.2011.5.112.1.1.1.5 | ColumnhwAclv6NumGroupDescription | read-create | current | Indicates the description of an ACLv6 group. It is used for users to identify different ACLv6 groups. Up to 127 characters are supported. If hwAclv6NumGroupDes… |
| 1.3.6.1.4.1.2011.5.112.1.1.1.6 | ColumnhwAclv6NumGroupCountClear | read-create | current | Used for clearing the software statistics of an ACLv6 group. Options: 1. cleared(1) -clear the software statistics of an ACLv6 group 2. nouse(2) -indicates no … |
| 1.3.6.1.4.1.2011.5.112.1.1.1.7 | ColumnhwAclv6NumGroupRowStatus | read-create | current | Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create an ACLv6 group 3. destro… |
| 1.3.6.1.4.1.2011.5.112.1.1.1.8 | ColumnhwAclv6NumGroupAclType | read-create | current | indicates the type of the ACLv6 group. Options: 1. basicAclv6(2) -Indicates that the type of the ACLv6 group is basic. 2. advAclv6(3) -Indicates that the type … |
| 1.3.6.1.4.1.2011.5.112.1.1.1.9 | ColumnhwAclv6NumGroupAclNumAllocMethod | read-create | current | indicates the method of allocating the ACLv6 group index automatically. Options: 1. minFreeId(1) -means to allocate the ACLv6 group index from the minimal free… |
| 1.3.6.1.4.1.2011.5.112.1.2 | TablehwAclv6BasicRuleTable | not-accessible | current | Describes the details about a basic ACLv6 rule in a basic ACLv6 group, including the source IP address, prefix length, and other attributes of the rule. The in… |
| 1.3.6.1.4.1.2011.5.112.1.2.1 | RowhwAclv6BasicRuleEntry | not-accessible | current | Describes the details about a basic ACLv6 rule in a basic ACLv6 group, including the source IP address, prefix length, and other attributes of the rule. The in… |
| 1.3.6.1.4.1.2011.5.112.1.2.1.1 | ColumnhwAclv6BasicAclNum | not-accessible | current | Uniquely identifies a basic ACLv6 group. Range: 2000-2999 Make sure that the ID of the ACLv6 group is already created in hwAclv6NumGroupTable. |
| 1.3.6.1.4.1.2011.5.112.1.2.1.2 | ColumnhwAclv6BasicSubitem | not-accessible | current | Describes the ID of a basic ACLv6 rule in the basic ACLv6 group, uniquely identifying a basic ACLv6 rule. Range: 0-4294967295 In the create operation, if the v… |
| 1.3.6.1.4.1.2011.5.112.1.2.1.3 | ColumnhwAclv6BasicAct | read-create | current | Describes the action of a rule. Options: 1. permit(1) -indicates that the data packets that meet the conditions can pass 2. deny(2) -indicates that the data pa… |
| 1.3.6.1.4.1.2011.5.112.1.2.1.4 | ColumnhwAclv6BasicSrcIpAddressType | read-create | current | Describes the ip-address type of the rule. The value represents a type of Internet address. Options: 1. unknown(0) -An unknown address type. This value must be… |
| 1.3.6.1.4.1.2011.5.112.1.2.1.5 | ColumnhwAclv6BasicSrcIpAddress | read-create | current | Describes source IP address of the rule. Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressTyp… |
| 1.3.6.1.4.1.2011.5.112.1.2.1.6 | ColumnhwAclv6BasicSrcIpAddressPrefixLength | read-create | current | Describes source IP address prefix length of the rule. Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP addre… |
| 1.3.6.1.4.1.2011.5.112.1.2.1.7 | ColumnhwAclv6BasicTimeRangeName | read-create | current | Describes the time range name of a rule. It is used when the effective time of a rule needs to be configured. If hwAclv6BasicTimeRangeName is not set, the rule… |
| 1.3.6.1.4.1.2011.5.112.1.2.1.8 | ColumnhwAclv6BasicEnable | read-only | current | Describes whether the rule is valid. Options: 1. true(1) -the rule is valid 2. false(2) -the rule is invalid If the rule is associated with a time range parame… |
| 1.3.6.1.4.1.2011.5.112.1.2.1.9 | ColumnhwAclv6BasicCount | read-only | current | Describes the statistics of packets that match the rule. |
| 1.3.6.1.4.1.2011.5.112.1.2.1.10 | ColumnhwAclv6BasicCountClear | read-create | current | Clears the statistics of packets that match the rule. Options: 1. cleared(1) -clear the statistics of packets that match the basic ACL rules 2. nouse(2) -indic… |
| 1.3.6.1.4.1.2011.5.112.1.2.1.11 | ColumnhwAclv6BasicPriority | read-create | current | Describes the priority of a rule. Range: 0-9 Default: 0 The priority ascends with the value. When multiple rules are matched at the same time, the rule with th… |
| 1.3.6.1.4.1.2011.5.112.1.2.1.12 | ColumnhwAclv6BasicRowStatus | read-create | current | Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a basic ACLv6 rule 3. de… |
| 1.3.6.1.4.1.2011.5.112.1.3 | TablehwAclv6AdvancedRuleTable | not-accessible | current | Describes the details about an advanced ACLv6 rule in an advanced ACLv6 group. The indexes of this table are hwAclv6AdvancedAclNum and hwAclv6AdvancedSubitem. … |
| 1.3.6.1.4.1.2011.5.112.1.3.1 | RowhwAclv6AdvancedRuleEntry | not-accessible | current | Describes the details about an advanced ACLv6 rule in an advanced ACLv6 group. The indexes of this entry are hwAclv6AdvancedAclNum and hwAclv6AdvancedSubitem. … |
| 1.3.6.1.4.1.2011.5.112.1.3.1.1 | ColumnhwAclv6AdvancedAclNum | not-accessible | current | Uniquely identifies an advanced ACLv6 group. Range: 3000-3999 Make sure that the ID of the ACLv6 group is already created in hwAclv6NumGroupTable. |
| 1.3.6.1.4.1.2011.5.112.1.3.1.2 | ColumnhwAclv6AdvancedSubitem | not-accessible | current | Describes the ID of an advanced ACLv6 rule in an advanced ACLv6 group, uniquely identifying an advanced ACLv6 rule. Range: 0-4294967295 In the create operation… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.3 | ColumnhwAclv6AdvancedAct | read-create | current | Describes the action of a rule. Options: 1. permit(1) -indicates that the data packets that meet the conditions can pass 2. deny(2) -indicates that the data pa… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.4 | ColumnhwAclv6AdvancedProtocol | read-create | current | Describes the protocol of IP packets that matches an advanced ACLv6 rule. Range: 0-255 Default: 0 Common protocols: GRE tunneling(47) Internet Control Message … |
| 1.3.6.1.4.1.2011.5.112.1.3.1.5 | ColumnhwAclv6AdvancedSrcIpAddressType | read-create | current | Describes the ip-address type of the rule. The value represents a type of Internet address. Options: 1. unknown(0) -An unknown address type. This value must be… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.6 | ColumnhwAclv6AdvancedSrcIpAddress | read-create | current | Describes source IP address of the rule. Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressTyp… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.7 | ColumnhwAclv6AdvancedSrcIpAddressPrefixLength | read-create | current | Describes source IP address prefix length of the rule. Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP addre… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.8 | ColumnhwAclv6AdvancedSrcOp | read-create | current | Describes the operation types of comparing packet source ports when the type of hwAclv6AdvancedProtocol is set to TCP or UDP. Range: 0-5 Options: 1. lt(1) -ind… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.9 | ColumnhwAclv6AdvancedSrcPort1 | read-create | current | Describes the operation value of port 1 in the comparison operation types of the source port in hwAclv6AdvancedSrcOp when hwAclv6AdvancedProtocol is set to TCP… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.10 | ColumnhwAclv6AdvancedSrcPort2 | read-create | current | Describes the operation value of port 2 in the comparison operation types of the source port in hwAclv6AdvancedSrcOp when hwAclv6AdvancedProtocol is set to TCP… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.11 | ColumnhwAclv6AdvancedDestIpAddressType | read-create | current | Destination IP address type of the advanced ACLv6 rule. A value that represents a type of Internet address. Options: 1. unknown(0) -An unknown address type. Th… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.12 | ColumnhwAclv6AdvancedDestIpAddress | read-create | current | Describes destination IP address of the advanced ACLv6 rule. Denotes a generic Internet address. An InetAddress value is always interpreted within the context … |
| 1.3.6.1.4.1.2011.5.112.1.3.1.13 | ColumnhwAclv6AdvancedDestIpAddressPrefixLength | read-create | current | Describes destination IP address prefix length of the advanced ACLv6 rule. Denotes the length of a generic Internet network address prefix. A value of n corres… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.14 | ColumnhwAclv6AdvancedDestOp | read-create | current | Describes destination port operation symbol of the advanced ACLv6 rule when the hwAclv6AdvancedProtocol is TCP or UDP. Options: 1. lt(1) -indicates '<' 2. eq(2… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.15 | ColumnhwAclv6AdvancedDestPort1 | read-create | current | Describes the operation value of port 1 in the comparison operation types of the destination port in hwAclv6AdvancedDestOp when hwAclv6AdvancedProtocol is set … |
| 1.3.6.1.4.1.2011.5.112.1.3.1.16 | ColumnhwAclv6AdvancedDestPort2 | read-create | current | Describes the operation value of port 2 in the comparison operation types of the destination port in hwAclv6AdvancedDestOp when hwAclv6AdvancedProtocol is set … |
| 1.3.6.1.4.1.2011.5.112.1.3.1.17 | ColumnhwAclv6AdvancedPrecedence | read-create | current | Describes the priority field of data frames that an advanced ACLv6 rule needs to match. If the value is not specified for an advanced ACLv6 rule, the invalid v… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.18 | ColumnhwAclv6AdvancedTos | read-create | current | Describes the type of service (ToS) field of data frames that an advanced ACLv6 rule needs to match. Range: 0-15, -1 If the value is not specified for an advan… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.19 | ColumnhwAclv6AdvancedDscp | read-create | current | Describes the differentiated services code point (DSCP) value of data frames that an advanced ACLv6 rule needs to match. Range: 0-63, -1 If the value is not sp… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.20 | ColumnhwAclv6AdvancedTimeRangeName | read-create | current | Describes the time range name of a rule. It is used when the effective time of a rule needs to be configured. If hwAclv6AdvancedTimeRangeName is not set, the r… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.21 | ColumnhwAclv6AdvancedIcmpv6Type | read-create | current | Describes the ICMPv6 type when packets are filtered by ICMPv6 type and when hwAclv6AdvancedProtocol is set to ICMPv6. Range: 0-255, -1 If the value is not spec… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.22 | ColumnhwAclv6AdvancedIcmpv6Code | read-create | current | Describes ICMPv6 codes that the ICMPv6 packets are filtered both by ICMPv6 type and ICMP code when hwAclv6AdvancedProtocol is set to ICMPv6. Range: 0-255, -1 I… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.23 | ColumnhwAclv6AdvancedEnable | read-only | current | Describes whether an advanced ACLv6 rule is valid. Options: 1. true(1) -indicates that an advanced ACLv6 rule is valid 2. false(2) -indicates that an advanced … |
| 1.3.6.1.4.1.2011.5.112.1.3.1.24 | ColumnhwAclv6AdvancedCount | read-only | current | Describes the statistics of packets that match the rule. |
| 1.3.6.1.4.1.2011.5.112.1.3.1.25 | ColumnhwAclv6AdvancedCountClear | read-create | current | Clears the statistics of packets that match the rule. Options: 1. cleared(1) -clear the statistics of packets that match the advanced ACLv6 rules 2. nouse(2) -… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.26 | ColumnhwAclv6AdvancedPriority | read-create | current | Describes the priority of a rule. Range: 0-9 Default: 0 The priority ascends with the value. When multiple rules are matched at the same time, the rule with th… |
| 1.3.6.1.4.1.2011.5.112.1.3.1.27 | ColumnhwAclv6AdvancedRowStatus | read-create | current | Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create an advanced ACLv6 rule 3… |
| 1.3.6.1.4.1.2011.5.112.2 | NodehwAclv6Traps | |||
| 1.3.6.1.4.1.2011.5.112.2.1 | NodehwAclv6CommonTraps | |||
| 1.3.6.1.4.1.2011.5.112.2.1.0 | NodehwAclv6CommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.112.2.1.0.1 | NotificationhwAclv6AddBasicAclTrap | current | The hwAclv6AddBasicAclTrap will be sent when the basic aclv6 rule is added. | |
| 1.3.6.1.4.1.2011.5.112.2.1.0.2 | NotificationhwAclv6DeleteBasicAclTrap | current | The hwAclv6DeleteBasicAclTrap will be sent when the basic aclv6 rule is deleted. | |
| 1.3.6.1.4.1.2011.5.112.2.1.0.3 | NotificationhwAclv6AddAdvancedAclTrap | current | The hwAclv6AddAdvancedAclTrap will be sent when the advanced aclv6 rule is added. | |
| 1.3.6.1.4.1.2011.5.112.2.1.0.4 | NotificationhwAclv6DeleteAdvancedAclTrap | current | The hwAclv6DeleteAdvancedAclTrap will be sent when the advanced aclv6 rule is deleted. | |
| 1.3.6.1.4.1.2011.5.112.2.2 | NodehwAclv6AlarmTraps |