HUAWEI-NGADSL-LINE-MIB
278 objects
The MIB is used for defining HUAWEI NGADSL LINE MIB objects, which expand from RFC4706 ADSL2-LINE MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.238.1.1.1.1.65535 | Scalaradsl2LineStatusCodingGainDs | read-only | current | The actual value of Coding gain upstream parameter,it ranges from 0 to 16. Unit: 0.5 dB |
| 1.3.6.1.2.1.10.238.1.1.1.1.65536 | Scalaradsl2LineStatusCodingGainUs | read-only | current | The actual value of Coding gain downstream parameter,it ranges from 0 to 16. Unit: 0.5 dB |
| 1.3.6.1.2.1.10.238.1.1.1.1.65537 | Scalaradsl2LineStatusPcbDs | read-only | current | Indicates Power Cut-back on downstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB). Unit: tenth dB |
| 1.3.6.1.2.1.10.238.1.1.1.1.65538 | Scalaradsl2LineStatusPcbUs | read-only | current | Indicates Power Cut-back on upstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB) Unit: tenth dB |
| 1.3.6.1.2.1.10.238.1.1.1.1.65539 | Scalarhwadsl2Dynamicprofile | read-write | current | The value of this object identifies the row in the ADSL Dynamic Profile Table,which applies to this ADSL line, and channels if applicable. NULL - indicates tha… |
| 1.3.6.1.2.1.10.238.1.2.1.1.65535 | Scalaradsl2ChStatusINP | read-only | current | The actual impulse noise protection (INP) on the bearer channel in L0 state. Unit: 0.1 DMT symbol |
| 1.3.6.1.2.1.10.238.1.2.1.1.65536 | Scalaradsl2ChStatusRSRedundancy | read-only | current | The actual number of Reed-Solomon redundancy bytes per codeword used in the latency path in which the bearer channel is transported. The value is coded in byte… |
| 1.3.6.1.2.1.10.238.1.2.1.1.65537 | Scalaradsl2ChStatusRSSymbols | read-only | current | The DMT Symbol number per codeword used in the latency path in which the bearer channel is transported. Unit: 0.01 DMT symbol |
| 1.3.6.1.2.1.10.238.1.2.1.1.65538 | Scalaradsl2ChStatusInterDepth | read-only | current | The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The value ranges from 1 to 4096 by step of 1. The va… |
| 1.3.6.1.2.1.10.238.1.2.1.1.65539 | Scalaradsl2ChStatusSymbolLength | read-only | current | The actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. This value does not include trellis overhead. Uni… |
| 1.3.6.1.2.1.10.238.1.2.1.1.65540 | Scalaradsl2ChStatusRSSize | read-only | current | The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. Unit: byte |
| 1.3.6.1.2.1.10.238.1.2.2.1.65535 | Scalaradsl2SCStatusTxPSD | read-only | current | The PSD MASK per sub-carrier.An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub-carriers. It ranges from -1400 to -300 units of… |
| 1.3.6.1.2.1.10.238.1.2.2.1.65536 | Scalaradsl2SCStatusSnrMargins | read-only | current | SNR Margin is the maximum increase in dB of the noise power received at the ATU (ATU-R on downstream direction and ATU-C on upstream direction), such that the … |
| 1.3.6.1.2.1.10.238.1.4.1.1.1.65535 | Scalaradsl2PMLEverBeforeFecs | read-only | current | Count of seconds since agent reset that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited d… |
| 1.3.6.1.2.1.10.238.1.4.1.1.1.65536 | Scalaradsl2PMLEverBeforeEs | read-only | current | Count of seconds since agent reset that there was: ATU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 ATU-R: FEB… |
| 1.3.6.1.2.1.10.238.1.4.1.1.1.65537 | Scalaradsl2PMLEverBeforeSes | read-only | current | Count of seconds since agent reset that there was: ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 ATU-R: … |
| 1.3.6.1.2.1.10.238.1.4.1.1.1.65538 | Scalaradsl2PMLEverBeforeLoss | read-only | current | Count of seconds since agent reset that there was LOS (or LOS-FE for ATU-R). Unit: seconds |
| 1.3.6.1.2.1.10.238.1.4.1.1.1.65539 | Scalaradsl2PMLEverBeforeUas | read-only | current | Count of seconds in Unavailability State since agent reset. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the onse… |
| 1.3.6.1.2.1.10.238.1.4.1.2.1.65535 | Scalaradsl2PMLInitEverBeforeFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) since agent reset. |
| 1.3.6.1.2.1.10.238.1.4.1.2.1.65536 | Scalaradsl2PMLInitEverBeforeFailedFullInits | read-only | current | Count of failed full initializations on the line since agent reset. |
| 1.3.6.1.2.1.10.238.1.4.1.2.1.65537 | Scalaradsl2PMLInitEverBeforeShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) since agent reset. |
| 1.3.6.1.2.1.10.238.1.4.1.2.1.65538 | Scalaradsl2PMLInitEverBeforeFailedShortInits | read-only | current | Count of failed short initializations on the line since agent reset. |
| 1.3.6.1.2.1.10.238.1.4.2.1.1.65535 | Scalaradsl2PMChEverBeforeCodingViolations | read-only | current | Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If the CRC is applied over… |
| 1.3.6.1.2.1.10.238.1.4.2.1.1.65536 | Scalaradsl2PMChEverBeforeCorrectedBlocks | read-only | current | Count of FEC (FFEC for ATU-R) anomalies (corrected code words) occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If th… |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65535 | Scalaradsl2LConfProfTrellisMode | read-create | current | Enable and disable the trellis mode. This object is defaulted enabled(2). Options: 1. disable(1) - Disable the trellis 2. enable(2) - Enable the trellis |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65536 | Scalaradsl2LConfProfBitSwapDs | read-create | current | Enable and disable the bit swap downstream of a line. This object is defaulted enable(2). Options: 1. disable(1) - Disable the bit swap downstream of a line 2.… |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65537 | Scalaradsl2LConfProfBitSwapUs | read-create | current | Enable and disable the bit swap upstream of a line. This object is defaulted enable(2). Options: 1. disable(1) - Disable the bit swap upstream of a line 2. ena… |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65538 | Scalaradsl2LConfProfDpboEPsd | read-create | current | This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number o… |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65539 | Scalaradsl2LConfProfDpboEsEL | read-create | current | This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi… |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65540 | Scalaradsl2LConfProfDpboEsCableModelA | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65541 | Scalaradsl2LConfProfDpboEsCableModelB | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65542 | Scalaradsl2LConfProfDpboEsCableModelC | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65543 | Scalaradsl2LConfProfDpboMus | read-create | current | DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shal… |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65544 | Scalaradsl2LConfProfDpboFMin | read-create | current | DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multip… |
| 1.3.6.1.2.1.10.238.1.5.1.2.1.65545 | Scalaradsl2LConfProfDpboFMax | read-create | current | DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.… |
| 1.3.6.1.2.1.10.238.1.5.3.3.1.65535 | Scalaradsl2ChAlarmConfProfileMonitoringRateDs | read-create | current | The channel monitoring rate downstream. When the value you set is larger than the value of the rate downstream defined in the channel profile, it will not be s… |
| 1.3.6.1.2.1.10.238.1.5.3.3.1.65536 | Scalaradsl2ChAlarmConfProfileMonitoringRateUs | read-create | current | The channel monitoring rate upstream. When the value you set is larger than the value of the rate upstream defined in the channel profile, it will not be succe… |
| 1.3.6.1.2.1.10.238.1.65535 | Nodeadsl2Mode | |||
| 1.3.6.1.2.1.10.238.1.65535.1 | Scalarhwadslmodecfg | read-write | current | This object is used to change ADSL management mode. After the mode being changed, system will automatically save data and reboot. Options: 1. rfc2662(1) - Mana… |
| 1.3.6.1.2.1.10.238.1.65535.2 | Scalarhwadslabrmodecfg | read-write | current | This object is used to change abr-calculation mode. Options: 1. normalMode(1) - Change mode to normal abr-calculation 2. ptMode(2) - Change mode to pt abr-calc… |
| 1.3.6.1.4.1.2011.6.138 | Identityhwadsl2MIB | The MIB is used for defining HUAWEI NGADSL LINE MIB objects, which expand from RFC4706 ADSL2-LINE MIB. | ||
| 1.3.6.1.4.1.2011.6.138.1 | Nodehwadsl2 | |||
| 1.3.6.1.4.1.2011.6.138.1.0 | Nodehwadsl2Notifications | |||
| 1.3.6.1.4.1.2011.6.138.1.1 | Nodehwadsl2Line | |||
| 1.3.6.1.4.1.2011.6.138.1.1.1 | Tablehwadsl2LineTable | not-accessible | current | The table hwadsl2LineTable contains configuration, command, and status parameters of the ADSL2 line. The index of this table is an interface index where the in… |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1 | Rowhwadsl2LineEntry | not-accessible | current | The table hwadsl2LineTable contains configuration, command, and status parameters of the ADSL2 line. The index of this entry is an interface index where the in… |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.1 | Columnhwadsl2LineStatusCodingGainDsInfo | read-only | current | The actual value of Coding gain upstream parameter,it ranges from 0 to 16 units of 0.5 dB. Unit: 0.5 dB |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.2 | Columnhwadsl2LineStatusCodingGainUsInfo | read-only | current | The actual value of Coding gain downstream parameter,it ranges from 0 to 16 units of 0.5 dB. Unit: 0.5 dB |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.3 | Columnhwadsl2LineStatusPcbDsInfo | read-only | current | Indicates Power Cut-back on downstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB). Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.4 | Columnhwadsl2LineStatusPcbUsInfo | read-only | current | Indicates Power Cut-back on upstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB) and the invalid value is 4294967295. U… |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.5 | Columnhwadsl2DynamicprofileInfo | read-write | current | The value of this object identifies the row in the ADSL Dynamic Profile Table,which applies to this ADSL line, and channels if applicable. NULL -Indicates that… |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.6 | Columnhwadsl2LineStatusInitResult | read-only | current | Indicates the result of the last full initialization performed on the line. Options: 1. noFail(0) - Successful initialization 2. configError(1) - Configuration… |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.7 | Columnhwadsl2LineStatusRtxUsedDs | read-only | current | This parameter specifies whether G.998.4 retransmission is used in a given transmit direction. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2… |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.8 | Columnhwadsl2LineStatusLastRetrainInfo | read-only | current | Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpe-l3-trigger(2) - The terminal initiates a lo… |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.9 | Columnhwadsl2LineStatusLineRateDs | read-only | current | The actual line rate downstream. Unit: bits/second |
| 1.3.6.1.4.1.2011.6.138.1.1.1.1.10 | Columnhwadsl2LineStatusLineRateUs | read-only | current | The actual line rate upstream. Unit: bits/second |
| 1.3.6.1.4.1.2011.6.138.1.2 | Nodehwadsl2Status | |||
| 1.3.6.1.4.1.2011.6.138.1.2.1 | Tablehwadsl2ChannelStatusTable | not-accessible | current | The table hwadsl2ChannelStatusTable contains status parameters of the ADSL2 channel and live data from equipment. The indexes of this table are ifIndex and ads… |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1 | Rowhwadsl2ChannelStatusEntry | not-accessible | current | The table hwadsl2ChannelStatusTable contains status parameters of the ADSL2 channel and live data from equipment. The indexes of this entry are ifIndex and ads… |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1.1 | Columnhwadsl2ChStatusPhyRrrcBits | read-only | current | The bits in the channel that used to retransmission. Unit: bit |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1.2 | Columnhwadsl2ChStatusPhyRtxQueue | read-only | current | The number of the units for retransmission. |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1.3 | Columnhwadsl2ChStatusINP | read-only | current | If retransmission is not used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) on the bearer channel in the L0 s… |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1.4 | Columnhwadsl2ChStatusRSRedundancy | read-only | current | The actual number of Reed-Solomon redundancy bytes per codeword used in the latency path in which the bearer channel is transported. The value is coded in byte… |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1.5 | Columnhwadsl2ChStatusRSSymbols | read-only | current | The DMT Symbol number per codeword used in the latency path in which the bearer channel is transported. Unit: 0.01 DMT symbol |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1.6 | Columnhwadsl2ChStatusInterDepth | read-only | current | The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The value ranges from 1 to 4096 by step of 1. The va… |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1.7 | Columnhwadsl2ChStatusSymbolLength | read-only | current | The actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. This value does not include trellis overhead. Uni… |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1.8 | Columnhwadsl2ChStatusRSSize | read-only | current | The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. Unit: byte |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1.9 | Columnhwadsl2ChStatusActNetDataRate | read-only | current | In L0 state, this parameter reports the Net Data Rate at which the bearer channel is operating. In L2 state, this parameter contains the Net Data Rate in the p… |
| 1.3.6.1.4.1.2011.6.138.1.2.1.1.10 | Columnhwadsl2ChStatusActINPAgainstREIN | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditio… |
| 1.3.6.1.4.1.2011.6.138.1.2.2 | Tablehwadsl2SCStatusTable | not-accessible | current | The table hwadsl2SCStatusTable contains status parameters of the ADSL2 sub-carriers. The following points apply to this table: 1. The main purpose of this tabl… |
| 1.3.6.1.4.1.2011.6.138.1.2.2.1 | Rowhwadsl2SCStatusEntry | not-accessible | current | The table hwadsl2SCStatusTable contains status parameters of the ADSL2 sub-carriers. The following points apply to this table: 1. The main purpose of this tabl… |
| 1.3.6.1.4.1.2011.6.138.1.2.2.1.1 | Columnhwadsl2SCStatusInfoTxPSD | read-only | current | The PSD MASK per sub-carrier.An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub-carriers. It ranges from -1400 to -300 units of… |
| 1.3.6.1.4.1.2011.6.138.1.2.2.1.2 | Columnhwadsl2SCStatusInfoSnrMargins | read-only | current | SNR Margin is the maximum increase in dB of the noise power received at the ATU (ATU-R on downstream direction and ATU-C on upstream direction), such that the … |
| 1.3.6.1.4.1.2011.6.138.1.3 | Nodehwadsl2Inventory | |||
| 1.3.6.1.4.1.2011.6.138.1.4 | Nodehwadsl2PM | |||
| 1.3.6.1.4.1.2011.6.138.1.4.1 | Nodehwadsl2PMLine | |||
| 1.3.6.1.4.1.2011.6.138.1.4.1.1 | Tablehwadsl2PMLineCurrTable | not-accessible | current | The table hwadsl2PMLineCurrTable contains current Performance Monitoring results of ADSL2 line. The PM counters in the table are not reset even when the xtU is… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1 | Rowhwadsl2PMLineCurrEntry | not-accessible | current | The table hwadsl2PMLineCurrTable contains current Performance Monitoring results of ADSL2 line. The PM counters in the table are not reset even when the xtU is… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.1 | Columnhwadsl2PMLCurr15MInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.2 | Columnhwadsl2PMLCurr15MInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.3 | Columnhwadsl2PMLCurr15MInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.4 | Columnhwadsl2PMLCurr1DayInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.5 | Columnhwadsl2PMLCurr1DayInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.6 | Columnhwadsl2PMLCurr1DayInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.7 | Columnhwadsl2PMLEverBeforeInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.8 | Columnhwadsl2PMLEverBeforeInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.9 | Columnhwadsl2PMLEverBeforeInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.10 | Columnhwadsl2PMLEverBeforeFecs | read-only | current | Count of seconds since agent reset that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited d… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.11 | Columnhwadsl2PMLEverBeforeEs | read-only | current | Count of seconds since agent reset that there was: ATU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 ATU-R: FEB… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.12 | Columnhwadsl2PMLEverBeforeSes | read-only | current | Count of seconds since agent reset that there was: ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 ATU-R: … |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.13 | Columnhwadsl2PMLEverBeforeLoss | read-only | current | Count of seconds since agent reset that there was LOS (or LOS-FE for ATU-R). Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.14 | Columnhwadsl2PMLEverBeforeUas | read-only | current | Count of seconds in Unavailability State since agent reset. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the onse… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.15 | Columnhwadsl2PMLCurr15MStartTime | read-only | current | Start time of the current 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.16 | Columnhwadsl2PMLCurr1DayStartTime | read-only | current | Start time of the current 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.17 | Columnhwadsl2PMLCurr15MLofs | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Framing. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.18 | Columnhwadsl2PMLCurr15MLols | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Link. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.19 | Columnhwadsl2PMLCurr15MLops | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Power. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.20 | Columnhwadsl2PMLCurr1DayLofs | read-only | current | Count of the number of seconds when there was Loss of Framing during the current day. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.21 | Columnhwadsl2PMLCurr1DayLols | read-only | current | Count of the number of seconds when there was Loss of Link during the current day. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.22 | Columnhwadsl2PMLCurr1DayLops | read-only | current | Count of the number of seconds when there was Loss of Power during the current day. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.23 | Columnhwadsl2PMLEverBeforeLofs | read-only | current | Count of the number of seconds when there was Loss of Framing since agent reset. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.24 | Columnhwadsl2PMLEverBeforeLols | read-only | current | Count of the number of seconds when there was Loss of Link since agent reset. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.25 | Columnhwadsl2PMLEverBeforeLops | read-only | current | Count of the number of seconds when there was Loss of Power since agent reset. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.26 | Columnhwadsl2PMLCurr15MLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 min… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.27 | Columnhwadsl2PMLCurr15MEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation p… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.28 | Columnhwadsl2PMLCurr15MMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minute… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.29 | Columnhwadsl2PMLCurr1DayLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hou… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.30 | Columnhwadsl2PMLCurr1DayEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation per… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.31 | Columnhwadsl2PMLCurr1DayMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours … |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.32 | Columnhwadsl2PMLEverBeforeLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed ever before. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.33 | Columnhwadsl2PMLEverBeforeEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.1.1.34 | Columnhwadsl2PMLEverBeforeMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed ever before. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2 | Tablehwadsl2PMLineHist15MinTable | not-accessible | current | The table hwadsl2PMLineHist15MinTable contains Performance Monitoring results of ADSL2 line at last 15 minutes. The PM counters in the table are not reset even… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2.1 | Rowhwadsl2PMLineHist15MinEntry | not-accessible | current | The table hwadsl2PMLineHist15MinTable contains Performance Monitoring results of ADSL2 line at last 15 minutes. The PM counters in the table are not reset even… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2.1.1 | Columnhwadsl2PMLHist15MInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line at last 15 minutes. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2.1.2 | Columnhwadsl2PMLHist15MInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line at last 15 minutes. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2.1.3 | Columnhwadsl2PMLHist15MInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line at last 15 minutes. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2.1.4 | Columnhwadsl2PMLHist15MStartTime | read-only | current | Start time of the historical 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2.1.5 | Columnhwadsl2PMLHist15MLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2.1.6 | Columnhwadsl2PMLHist15MLols | read-only | current | Count of seconds in the interval when there was Loss of Link. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2.1.7 | Columnhwadsl2PMLHist15MLops | read-only | current | Count of seconds in the interval when there was Loss of Power. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2.1.8 | Columnhwadsl2PMLHist15MLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 min… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2.1.9 | Columnhwadsl2PMLHist15MEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation p… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.2.1.10 | Columnhwadsl2PMLHist15MMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minute… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3 | Tablehwadsl2PMLineHist1DayTable | not-accessible | current | The table hwadsl2PMLineHist1DayTable contains Performance Monitoring results of ADSL2 line at last 1 day. The PM counters in the table are not reset even when … |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3.1 | Rowhwadsl2PMLineHist1DayEntry | not-accessible | current | The table hwadsl2PMLineHist1DayTable contains Performance Monitoring results of ADSL2 line at last 1 day. The PM counters in the table are not reset even when … |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3.1.1 | Columnhwadsl2PMLHist1DayInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line at last 1 day. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3.1.2 | Columnhwadsl2PMLHist1DayInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line at last 1 day. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3.1.3 | Columnhwadsl2PMLHist1DayInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line at last 1 day. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3.1.4 | Columnhwadsl2PMLHist1DayStartTime | read-only | current | Start time of the historical 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3.1.5 | Columnhwadsl2PMLHist1DayLofs | read-only | current | Count of seconds during this interval that there was Loss of Framing. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3.1.6 | Columnhwadsl2PMLHist1DayLols | read-only | current | Count of seconds during this interval that there was Loss of Link. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3.1.7 | Columnhwadsl2PMLHist1DayLops | read-only | current | Count of seconds during this interval that there was Loss of Power. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3.1.8 | Columnhwadsl2PMLHist1DLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hou… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3.1.9 | Columnhwadsl2PMLHist1DEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation per… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.3.1.10 | Columnhwadsl2PMLHist1DMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours … |
| 1.3.6.1.4.1.2011.6.138.1.4.1.4 | Tablehwadsl2PMLineCurrInitTable | not-accessible | current | The table hwadsl2PMLineCurrInitTable contains current initialization counters of the ADSL2 line. The PM counters in the table are not reset even when the XTU i… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.4.1 | Rowhwadsl2PMLineCurrInitEntry | not-accessible | current | The table hwadsl2PMLineCurrInitTable contains current initialization counters of the ADSL2 line. The PM counters in the table are not reset even when the XTU i… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.4.1.1 | Columnhwadsl2PMLInitEverBeforeFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) since agent reset. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.4.1.2 | Columnhwadsl2PMLInitEverBeforeFailedFullInits | read-only | current | Count of failed full initializations on the line since agent reset. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.4.1.3 | Columnhwadsl2PMLInitEverBeforeShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) since agent reset. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.4.1.4 | Columnhwadsl2PMLInitEverBeforeFailedShortInits | read-only | current | Count of failed short initializations on the line since agent reset. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.4.1.5 | Columnhwadsl2PMLineCurrInit15MStartTime | read-only | current | Start time of the current init 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.4.1.6 | Columnhwadsl2PMLineCurrInit1DayStartTime | read-only | current | Start time of the current init 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.5 | Tablehwadsl2PMLineInitHist15MinTable | not-accessible | current | The table hwadsl2PMLineInitHist15MinTable contains Performance Monitoring results of ADSL2 line initialize at last 15 minutes. The PM counters in the table are… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.5.1 | Rowhwadsl2PMLineInitHist15MinEntry | not-accessible | current | The table hwadsl2PMLineInitHist15MinTable contains Performance Monitoring results of ADSL2 line initialize at last 15 minutes. The PM counters in the table are… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.5.1.1 | Columnhwadsl2PMLineInitHist15MinStartTime | read-only | current | Start time of the historical init 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.4.1.6 | Tablehwadsl2PMLineInitHist1DayTable | not-accessible | current | The table hwadsl2PMLineInitHist1DayTable contains Performance Monitoring results of ADSL2 line initialize at last one day. The indexes of this table are ifInde… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.6.1 | Rowhwadsl2PMLineInitHist1DayEntry | not-accessible | current | The table hwadsl2PMLineInitHist1DayTable contains Performance Monitoring results of ADSL2 line initialize at last one day. The indexes of this entry are ifInde… |
| 1.3.6.1.4.1.2011.6.138.1.4.1.6.1.1 | Columnhwadsl2PMLineInitHist1DayStartTime | read-only | current | Start time of the historical init 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.4.2 | Nodehwadsl2PMChannel | |||
| 1.3.6.1.4.1.2011.6.138.1.4.2.1 | Tablehwadsl2PMChCurrTable | not-accessible | current | The table hwadsl2PMChCurrTable contains some extended current Performance Monitoring results of the ADSL2 channel. The PM counters in the table are not reset e… |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1 | Rowhwadsl2PMChCurrEntry | not-accessible | current | The table hwadsl2PMChCurrTable contains some extended current Performance Monitoring results of the ADSL2 channel. The PM counters in the table are not reset e… |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.1 | Columnhwadsl2PMChCurr15MRtxCW | read-only | current | Count of units request retransmission on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.2 | Columnhwadsl2PMChCurr15MRtxCorrectedCW | read-only | current | Count of units corrected by retransmission on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.3 | Columnhwadsl2PMChCurr15MRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.4 | Columnhwadsl2PMChCurr1DayRtxCW | read-only | current | Count of units request retransmission on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.5 | Columnhwadsl2PMChCurr1DayRtxCorrectedCW | read-only | current | Count of units corrected by retransmission on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.6 | Columnhwadsl2PMChCurr1DayRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.7 | Columnhwadsl2PMChEverBeforeRtxCW | read-only | current | Count of units request retransmission on this channel ever before. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.8 | Columnhwadsl2PMChEverBeforeRtxCorrectedCW | read-only | current | Count of units corrected by retransmission on this channel ever before. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.9 | Columnhwadsl2PMChEverBeforeRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission on this channel ever before. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.10 | Columnhwadsl2PMChEverBeforeCodingViolations | read-only | current | Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If the CRC is applied over… |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.11 | Columnhwadsl2PMChEverBeforeCorrectedBlocks | read-only | current | Count of FEC (FFEC for ATU-R) anomalies (corrected code words) occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If th… |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.12 | Columnhwadsl2PMChCur15MStartTime | read-only | current | Start time of the channel current 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.1.1.13 | Columnhwadsl2PMChCur1DayStartTime | read-only | current | Start time of the channel current 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.2 | Tablehwadsl2PMChHist15MinTable | not-accessible | current | The table hwadsl2PMChHist15MinTable contains PM channel history for 15min intervals of the ADSL2 channel. The indexes of this table are ifIndex,adsl2PMChHist15… |
| 1.3.6.1.4.1.2011.6.138.1.4.2.2.1 | Rowhwadsl2PMChHist15MinEntry | not-accessible | current | The table hwadsl2PMChHist15MinTable contains PM channel history for 15min intervals of the ADSL2 channel. The indexes of this entry are ifIndex,adsl2PMChHist15… |
| 1.3.6.1.4.1.2011.6.138.1.4.2.2.1.1 | Columnhwadsl2PMChHist15MRtxCW | read-only | current | Count of units request retransmission on this channel within the last 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.2.1.2 | Columnhwadsl2PMChHist15MRtxCorrectedCW | read-only | current | Count of units corrected by retransmission on this channel within the last 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.2.1.3 | Columnhwadsl2PMChHist15MRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission on this channel within the last 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.2.1.4 | Columnhwadsl2PMChHist15MStartTime | read-only | current | Start time of the historical 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.3 | Tablehwadsl2PMChHist1DTable | not-accessible | current | The table hwadsl2PMChHist1DayTable contains some extended PM channel history for 1-day intervals of ADSL2. The indexes of this table are ifIndex,adsl2PMChHist1… |
| 1.3.6.1.4.1.2011.6.138.1.4.2.3.1 | Rowhwadsl2PMChHist1DEntry | not-accessible | current | The table hwadsl2PMChHist1DayTable contains some extended PM channel history for 1-day intervals of ADSL2. The indexes of this entry are ifIndex,adsl2PMChHist1… |
| 1.3.6.1.4.1.2011.6.138.1.4.2.3.1.1 | Columnhwadsl2PMChHist1DRtxCW | read-only | current | Count of units request retransmission on this channel within the last 1 day interval. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.3.1.2 | Columnhwadsl2PMChHist1DRtxCorrectedCW | read-only | current | Count of units corrected by retransmission on this channel within the last 1 day interval. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.3.1.3 | Columnhwadsl2PMChHist1DRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission on this channel within the last 1 day interval. |
| 1.3.6.1.4.1.2011.6.138.1.4.2.3.1.4 | Columnhwadsl2PMChHist1DStartTime | read-only | current | Start time of the historical 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.138.1.5 | Nodehwadsl2Profile | |||
| 1.3.6.1.4.1.2011.6.138.1.5.1 | Nodehwadsl2ProfileLine | |||
| 1.3.6.1.4.1.2011.6.138.1.5.1.2 | Tablehwadsl2LineConfProfTable | not-accessible | current | The table hwadsl2LineConfProfTable contains huawei private ADSL2 line profile configuration.Entries in this table MUST be maintained in a persistent manner. Th… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1 | Rowhwadsl2LineConfProfEntry | not-accessible | current | The table hwadsl2LineConfProfTable contains huawei private ADSL2 line profile configuration.Entries in this table MUST be maintained in a persistent manner. Th… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.1 | Columnhwadsl2LConfProfInmIatoDs | read-create | current | The parameter of downstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determ… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.2 | Columnhwadsl2LConfProfInmIatsDs | read-create | current | The parameter of downstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine … |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.3 | Columnhwadsl2LConfProfInmCcDs | read-create | current | The parameter of Downstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the … |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.4 | Columnhwadsl2LConfProfInmInpeqModeDs | read-create | current | The parameter of Downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.5 | Columnhwadsl2LConfProfRfiBands | read-create | current | The RFI notch parameter. It is a string consist of begin tone index, end tone index and psd value. This is a string of 4 groups of values in the following stru… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.6 | Columnhwadsl2LConfProfReferenceClock | read-create | current | This object configures the clock reference for the ATU-C in an ADSL Line. |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.7 | Columnhwadsl2LConfProfL3Time | read-create | current | This minimum time (in seconds) between an Entry into the L3 state and the L0 or L2 state. Unit: seconds |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.8 | Columnhwadsl2LConfProfDpboEselMin | read-create | current | DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and ADSL2 provision of additional K… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.9 | Columnhwadsl2LConfProfTrellisMode | read-create | current | Enables and disables the trellis mode. This object is defaulted enabled(2). |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.10 | Columnhwadsl2LConfProfBitSwapDs | read-create | current | Enables and disables the bit swap downstream of a line. |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.11 | Columnhwadsl2LConfProfBitSwapUs | read-create | current | Enables and disables the bit swap upstream of a line. |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.12 | Columnhwadsl2LConfProfDpboEPsd | read-create | current | This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number o… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.13 | Columnhwadsl2LConfProfDpboEsEL | read-create | current | This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.14 | Columnhwadsl2LConfProfDpboEsCableModelA | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.15 | Columnhwadsl2LConfProfDpboEsCableModelB | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.16 | Columnhwadsl2LConfProfDpboEsCableModelC | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.17 | Columnhwadsl2LConfProfDpboMus | read-create | current | DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shal… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.18 | Columnhwadsl2LConfProfDpboFMin | read-create | current | DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multip… |
| 1.3.6.1.4.1.2011.6.138.1.5.1.2.1.19 | Columnhwadsl2LConfProfDpboFMax | read-create | current | DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.… |
| 1.3.6.1.4.1.2011.6.138.1.5.2 | Nodehwadsl2ProfileChannel | |||
| 1.3.6.1.4.1.2011.6.138.1.5.2.1 | Tablehwadsl2ChConfProfileTable | not-accessible | current | The table hwadsl2ChConfProfileTable contains huawei private ADSL2 channel profile configuration. Entries in this table MUST be maintained in a persistent manne… |
| 1.3.6.1.4.1.2011.6.138.1.5.2.1.1 | Rowhwadsl2ChConfProfileEntry | not-accessible | current | The table hwadsl2ChConfProfileTable contains huawei private ADSL2 channel profile configuration. Entries in this table MUST be maintained in a persistent manne… |
| 1.3.6.1.4.1.2011.6.138.1.5.2.1.1.1 | Columnhwadsl2ChConfProfDataPathMode | read-create | current | The channel data path mode. Options: 1. atm(1) - ATM data path 2. ptm(2) - PTM data path 3. both(3) - ATM and PTM data path Huawei defined. |
| 1.3.6.1.4.1.2011.6.138.1.5.2.1.1.2 | Columnhwadsl2ChConfProfErasureDecoding | read-create | current | Enable or disable the erasure decoding of a channel. Options: 1. enable(1) - Open the erasure decoding of a channel 2. disable(2) - Close the erasure decoding … |
| 1.3.6.1.4.1.2011.6.138.1.5.2.1.1.3 | Columnhwadsl2ChConfProfPhyRcontrolDs | read-create | current | To enable or disable the retransmission function of downstream PHY-R. Options: 1. enable(1) - Enable the retransmission function of downstream PHY-R 2. disable… |
| 1.3.6.1.4.1.2011.6.138.1.5.2.1.1.4 | Columnhwadsl2ChConfProfPhyRcontrolUs | read-create | current | To enable or disable the retransmission function of upstream PHY-R. Options: 1. enable(1) - Enable the retransmission function of upstream PHY-R 2. disable(2) … |
| 1.3.6.1.4.1.2011.6.138.1.5.2.1.1.5 | Columnhwadsl2ChConfProfInpMaxDs | read-create | current | Maximum Impulse Noise Protection on downstream direction. |
| 1.3.6.1.4.1.2011.6.138.1.5.2.1.1.6 | Columnhwadsl2ChConfProfInpMaxUs | read-create | current | Maximum Impulse Noise Protection on upstream direction. |
| 1.3.6.1.4.1.2011.6.138.1.5.2.1.1.7 | Columnhwadsl2ChConfProfMinRtxRatioDs | read-create | current | This object is used to config the minimum retransmission band width parameter downstream. |
| 1.3.6.1.4.1.2011.6.138.1.5.2.1.1.8 | Columnhwadsl2ChConfProfMinRtxRatioUs | read-create | current | This object is used to config the minimum retransmission band width parameter upstream. |
| 1.3.6.1.4.1.2011.6.138.1.5.2.1.1.9 | Columnhwadsl2ChConfProfMinRSoverheadDs | read-create | current | This object is used to config the minimum RSoverhead parameter downstream. |
| 1.3.6.1.4.1.2011.6.138.1.5.2.1.1.10 | Columnhwadsl2ChConfProfMinRSoverheadUs | read-create | current | This object is used to config the minimum RSoverhead parameter upstream. |
| 1.3.6.1.4.1.2011.6.138.1.5.3 | Nodehwadsl2ProfileAlarmConf | |||
| 1.3.6.1.4.1.2011.6.138.1.5.3.1 | Tablehwadsl2ChAlarmConfProfileTable | not-accessible | current | The table hwadsl2ChAlarmConfProfileTable contains ADSL2 channel PM thresholds profiles. Entries in this table MUST be maintained in a persistent manner. The in… |
| 1.3.6.1.4.1.2011.6.138.1.5.3.1.1 | Rowhwadsl2ChAlarmConfProfileEntry | not-accessible | current | The table hwadsl2ChAlarmConfProfileTable contains ADSL2 channel PM thresholds profiles. Entries in this table MUST be maintained in a persistent manner. The in… |
| 1.3.6.1.4.1.2011.6.138.1.5.3.1.1.1 | Columnhwadsl2ChAlarmConfProfileMonitoringRateDs | read-create | current | The channel monitoring rate downstream. When the value you set is larger than the value of the rate downstream defined in the channel profile, it will not be s… |
| 1.3.6.1.4.1.2011.6.138.1.5.3.1.1.2 | Columnhwadsl2ChAlarmConfProfileMonitoringRateUs | read-create | current | The channel monitoring rate upstream. When the value you set is larger than the value of the rate upstream defined in the channel profile, it will not be succe… |
| 1.3.6.1.4.1.2011.6.138.1.5.3.2 | Tablehwadsl2LineAlarmConfProfileTable | not-accessible | current | The table hwadsl2LineAlarmConfProfileTable contains ADSL2 line PM thresholds profiles. A default profile with an index of 'DEFVAL' will always exist, and its p… |
| 1.3.6.1.4.1.2011.6.138.1.5.3.2.1 | Rowhwadsl2LineAlarmConfProfileEntry | not-accessible | current | The table hwadsl2LineAlarmConfProfileTable contains ADSL2 line PM thresholds profiles. A default profile with an index of 'DEFVAL' will always exist, and its p… |
| 1.3.6.1.4.1.2011.6.138.1.5.3.2.1.1 | Columnhwadsl2LineAlarmConfProfileXturThresh15MinLeftrs | read-create | current | A threshold for the hwadsl2PMLCurr15MLeftrs counter, when adsl2PMLCurrUnit is ATUR {2}. The value 0 means that no threshold is specified for the associated cou… |
| 1.3.6.1.4.1.2011.6.138.1.5.3.2.1.2 | ColumnhwAdsl2LineAlarmConfProfileDyingGaspAlarmSwitch | read-create | current | This object enable/disable the report of LOSS-OF-POWER alarm in an ADSL line. Options: 1. enable(1) - The report of LOSS-OF-POWER alarm in an ADSL line is enab… |
| 1.3.6.1.4.1.2011.6.138.1.5.3.2.1.3 | ColumnhwAdsl2LineAlarmConfProfileActiveFailAlarmSwitch | read-create | current | This object enable/disable the active fail alarm switch. Options: 1. enable(1) - The active fail alarm switch is enabled 2. disable(2) - The active fail alarm … |
| 1.3.6.1.4.1.2011.6.138.1.6 | Nodehwadsl2Scalar | |||
| 1.3.6.1.4.1.2011.6.138.1.6.1 | Nodehwadsl2ScalarSC | |||
| 1.3.6.1.4.1.2011.6.138.1.8 | Nodehwadsl2Conformance | |||
| 1.3.6.1.4.1.2011.6.138.1.9 | Nodehwadsl2Mode | |||
| 1.3.6.1.4.1.2011.6.138.1.9.1 | ScalarhwadslmodecfgCfg | read-write | current | This object is used to change ADSL management mode. After the mode being changed, system will automatically save data and reboot. |
| 1.3.6.1.4.1.2011.6.138.1.9.2 | ScalarhwadslabrmodecfgCfg | read-write | current | This object is used to change abr-calculation mode. Options: 1. normalMode(1) - Normal abr-calculation mode 2. ptMode(2) - PT abr-calculation mode |
| 1.3.6.1.4.1.2011.6.138.1.10 | NodehwAdsl2TrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.138.1.10.0 | Scalarhwadsl2LinePMThresholdItem | accessible-for-notify | current | Indicate the threshold item. |
| 1.3.6.1.4.1.2011.6.138.1.10.1 | Scalarhwadsl2LineTemplateID | accessible-for-notify | current | Indicate line template ID. |
| 1.3.6.1.4.1.2011.6.138.1.10.2 | Scalarhwadsl2ActivationFailureCause | accessible-for-notify | current | The reason of activation failure. |
| 1.3.6.1.4.1.2011.6.138.1.10.3 | Scalarhwadsl2ChipsetID | accessible-for-notify | current | The Chipset ID. |
| 1.3.6.1.4.1.2011.6.138.1.10.4 | ScalarhwAdsl2SwitchResult | accessible-for-notify | current | Mode switch result. Options: 1. success(0) - Indicates that the adsl mode switch result is success 2. fail(1) - Indicates that the adsl mode switch result is f… |
| 1.3.6.1.4.1.2011.6.138.1.10.5 | ScalarhwAdsl2RequestID | accessible-for-notify | current | Request ID. |
| 1.3.6.1.4.1.2011.6.138.1.10.6 | Scalarhwadsl2LineCmndConfLdsfResult | accessible-for-notify | current | The result of the test. Options: 1. success(0) - Indicates that the test result is success 2. fail(1) - Indicates that the test result is fail |
| 1.3.6.1.4.1.2011.6.138.1.10.7 | Scalarhwadsl2LinePMThresholdValue | accessible-for-notify | current | Indicate the threshold value of threshold item. |
| 1.3.6.1.4.1.2011.6.138.1.10.8 | Scalarhwadsl2LinePMCurrentValue | accessible-for-notify | current | Indicate the current value of threshold item. |
| 1.3.6.1.4.1.2011.6.138.1.10.9 | Scalarhwadsl2ChPMThresholdValue | accessible-for-notify | current | Indicate the threshold value of threshold item. |
| 1.3.6.1.4.1.2011.6.138.1.10.10 | Scalarhwadsl2ChPMCurrentValue | accessible-for-notify | current | Indicate the current value of threshold item. |
| 1.3.6.1.4.1.2011.6.138.1.11 | Nodehwadsl2Traps | |||
| 1.3.6.1.4.1.2011.6.138.1.11.1 | NodehwAdsl2CommonTraps | |||
| 1.3.6.1.4.1.2011.6.138.1.11.1.0 | NodehwAdsl2CommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.138.1.11.1.0.1 | NotificationhwAdsl2ModeSwitchResultTrap | current | Adsl2 mode switch result trap. This trap message is generated when the result of the recent ADSL mode switch process. | |
| 1.3.6.1.4.1.2011.6.138.1.11.1.0.2 | NotificationhwAdsl2AdminModeTrap | current | Adsl2 administration mode trap. This trap message is generated when the ADSL mode is the system worked. | |
| 1.3.6.1.4.1.2011.6.138.1.11.1.0.3 | NotificationhwAdsl2DeltOperResultTrap | current | NGADSL delt trap. This trap message is generated when delt test result reported. | |
| 1.3.6.1.4.1.2011.6.138.1.11.1.0.4 | NotificationhwAdsl2PortStatusChangeTrap | current | Adsl2 port status change trap. This trap message is generated when port status changes. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2 | Nodehwadsl2AlarmTraps | |||
| 1.3.6.1.4.1.2011.6.138.1.11.2.0 | Nodehwadsl2AlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.0 | Notificationhwadsl2PortAutoDeactiveAlarmTrap | current | Port automatically trap. This trap message is generated when the ADSL port is automatically deactivated. The ADSL port is automatically deactivated due to the … | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.1 | NotificationhwAdsl2PortReactiveAlarmTrap | current | Port reactive trap. This trap message is generated when the ADSL port is re-activated after the ADSL line recovers. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.2 | NotificationhwAdsl2PortATURPowerOffAlarmTrap | current | Port ATU-R power off trap. This trap message is generated when ATU-R is powered off. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.3 | NotificationhwAdsl2ChipsetRecoverAlarmTrap | current | Chipset recover trap. This trap message is generated when the ADSL chipset recovers. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.4 | NotificationhwAdsl2PortDeactiveAlarmTrap | current | Port deactive trap. This trap message is generated when some xDSL ports or all the xDSL ports are automatically deactivated. Some xDSL ports or all the xDSL po… | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.5 | NotificationhwAdsl2LinePerformanceStatAlarmTrap | current | Line performance statistics trap. This trap message is generated when the line performance statistics of the ADSL port reach the threshold. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.6 | NotificationhwAdsl2DownstreamActivationRateAlarmTrap | current | ADSL channel downstream activation rate trap. This trap message is generated when the ADSL channel downstream activation rate is lower than the threshold. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.7 | NotificationhwAdsl2ChannelPerformanceStatAlarmTrap | current | Channel performance statistics trap. This trap message is generated when the channel performance statistics of the ADSL port reach the threshold. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.8 | NotificationhwAdsl2UpstreamActivationRateAlarmTrap | current | ADSL channel upstream activation rate trap. This trap message is generated when the ADSL channel upstream activation rate is lower than the threshold. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.9 | NotificationhwAdsl2UpstreamRateIncreaseAlarmTrap | current | ADSL channel upstream rate increases trap. This trap message is generated when the ADSL channel upstream rate increases to a value higher than the threshold. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.10 | NotificationhwAdsl2UpstreamRateDecreaseAlarmTrap | current | ADSL channel upstream rate decreases trap. This trap message is generated when the ADSL channel upstream rate decreases to a value lower than the threshold. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.11 | NotificationhwAdsl2DownstreamRateIncreaseAlarmTrap | current | ADSL channel downstream rate increases trap. This trap message is generated when the ADSL channel downstream rate increases to a value higher than the threshol… | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.12 | NotificationhwAdsl2DownstreamRateDecreaseAlarmTrap | current | ADSL channel downstream rate decreases trap. This trap message is generated when the ADSL channel downstream rate decreases to a value lower than the threshold. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.13 | NotificationhwAdsl2FailedActiveAlarmTrap | current | Failed active trap. This trap message is generated when it failed to activate the port using the ADSL line configuration parameters. | |
| 1.3.6.1.4.1.2011.6.138.1.11.2.0.14 | NotificationhwAdsl2ChipsetNotAvailableAlarmTrap | current | Chipset not available trap. This trap message is generated when the ADSL chipset is not available. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Adsl2BitSwap | INTEGER { disable(1), enable(2) } | current | Enable and disable the bit swap upstream or downstream of a line. Options: 1. disable(1) - Disable the bit swap upstream or downstream of a line 2. enable(2) - Enable the bit swap upstream or downstream of a line |
| Adsl2CfgMode | INTEGER { rfc2662(1), rfc4706(2), tr165(3) } | current | The configured ADSL management mode. Options: 1. rfc2662(1) - Management model based on RFC2662 and RFC3440 2. rfc4706(2) - Management model based on RFC4706 3. tr165(3) - Management model based on TR-165 |
| Adsl2DataPathMode | INTEGER { atm(1), ptm(2), both(3) } | current | The channel data path mode. Options: 1. atm(1) - ATM data path 2. ptm(2) - PTM data path 3. both(3) - AMT and PTM data path |
| Adsl2DpboEpsd | OCTET STRING (SIZE(0..48)) | current | This is a structure that represents up to 16 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the PSD … |
| Adsl2LConfProfReferenceClockType | INTEGER { freeRun(1), system(2) } | current | The various clock references for the ADSL line, represented as an enumeration. Options: 1. freeRun(1) - Indicates the local clock 2. system(2) - Indicates the system clock |
| Adsl2PhyRControl | INTEGER { enable(1), disable(2) } | current | To enable or disable the retransmission function. Options: 1. enable(1) - Enable the retransmission function 2. disable(2) - Disable the retransmission function |
| Adsl2ProfSwitchType | INTEGER { enable(1), disable(2) } | current | The profile switch value is enable or disable. Options: 1. enable(1) - Enable the switch 2. disable(2) - Disable the switch |
| Adsl2RfiBand | OCTET STRING (SIZE(0..24)) | current | This is a string of 4 groups of values in the following structure: Octets 0+1 - Index of start sub-carrier used in the context of a first group. Octets 2+3 - Index of end sub-carrier used in the context of a first group… |
| Adsl2StatusRtxUsed | INTEGER { rtxInuse(1), rtxUnusedModeForbidden(2), rtxUnusedNotSupportedXtuc(3), rtxUnusedNotSupportedXtur(4), rtxUnusedNotSupportedXtucAndXtur(5), invalidValue(-1) } | current | This parameter specifies whether G.998.4 retransmission is used in a given transmit direction. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MODE = FORBIDDEN 3. rtxUnused… |
| Adsl2SymbolProtection | INTEGER { noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteeSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18) } | current | Attributes with this syntax are configuration parameters that reference the minimum-length impulse noise protection (INP) in terms of number of symbols. The possible values are: noProtection (i.e., INP not required), ha… |
| Adsl2TrellisMode | INTEGER { disable(1), enable(2) } | current | Enable and disable the trellis mode. This default value is enabled(2). Options: 1. disable(1) - Disable the trellis mode 2. enable(2) - Enable the trellis mode |
| Hwadsl2InitResult | INTEGER { noFail(0), configError(1), configNotFeasible(2), commFail(3), noPeerAtu(4), otherCause(5), ginpNotSelected(6) } | current | Specifies the result of a full initialization attempt; the six possible result values are: noFail(0) - Successful initialization. configError(1) - Configuration failure. configNotFeasible(2) - Configuration details not … |