HUAWEI-SECURITY-IPSEC-MIB
127 objects
V1.00 The IPSec mib is for Eudemon and USG product series.
Imported Objects
| RFC1155-SMI | enterprises |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011 | Nodehuawei | |||
| 1.3.6.1.4.1.2011.6 | NodehuaweiUtility | |||
| 1.3.6.1.4.1.2011.6.122 | NodehwSecurity | |||
| 1.3.6.1.4.1.2011.6.122.26 | IdentityhwIpsec | V1.00 The IPSec mib is for Eudemon and USG product series. | ||
| 1.3.6.1.4.1.2011.6.122.26.1 | NodehwIPSecGlobalStats | |||
| 1.3.6.1.4.1.2011.6.122.26.1.1 | ScalarhwIPSecGlobalTotal | read-only | current | Total number of IPSec tunnels. |
| 1.3.6.1.4.1.2011.6.122.26.1.2 | ScalarhwIPSecGlobalPacketInput | read-only | current | Number of received security packets. |
| 1.3.6.1.4.1.2011.6.122.26.1.3 | ScalarhwIPSecGlobalPacketOutput | read-only | current | Number of sent security packets. |
| 1.3.6.1.4.1.2011.6.122.26.1.4 | ScalarhwIPSecGlobalByteInput | read-only | current | Number of bytes of received security packets. |
| 1.3.6.1.4.1.2011.6.122.26.1.5 | ScalarhwIPSecGlobalByteOutput | read-only | current | Number of bytes of sent security packets. |
| 1.3.6.1.4.1.2011.6.122.26.1.6 | ScalarhwIPSecGlobalDroppedPacketInput | read-only | current | Number of discarded packets that are received. |
| 1.3.6.1.4.1.2011.6.122.26.1.7 | ScalarhwIPSecGlobalDroppedPacketOutput | read-only | current | Number of discarded packets that are sent. |
| 1.3.6.1.4.1.2011.6.122.26.1.8 | ScalarhwIPSecGlobalEncIntactPacket | read-only | current | Number of packets that do not need to be fragmented. |
| 1.3.6.1.4.1.2011.6.122.26.1.9 | ScalarhwIPSecGlobalEncPacketFirstSlice | read-only | current | Number of initial packets to be encrypted. |
| 1.3.6.1.4.1.2011.6.122.26.1.10 | ScalarhwIPSecGlobalEncPacketAfterSlice | read-only | current | Number of follow-up packets to be encrypted. |
| 1.3.6.1.4.1.2011.6.122.26.1.11 | ScalarhwIPSecGlobalDecPacketReassFirstSlice | read-only | current | Number of initial packets that are fragmented and assembled. |
| 1.3.6.1.4.1.2011.6.122.26.1.12 | ScalarhwIPSecGlobalDecPacketReassAfterSlice | read-only | current | Number of follow-up packets that are fragmented and assembled. |
| 1.3.6.1.4.1.2011.6.122.26.1.13 | ScalarhwIPSecGlobalDecPacketReassLenErr | read-only | current | Number of packets with incorrect length during reassembling. |
| 1.3.6.1.4.1.2011.6.122.26.1.14 | ScalarhwIPSecGlobalPacketHeaderWrong | read-only | current | Number of discarded packets caused by the packet header error. |
| 1.3.6.1.4.1.2011.6.122.26.1.15 | ScalarhwIPSecGlobalMemoryApplyFail | read-only | current | Number of discarded packets caused by memory applying failure. |
| 1.3.6.1.4.1.2011.6.122.26.1.16 | ScalarhwIPSecGlobalCannotFindSA | read-only | current | Number of discarded packets caused by no matched security associations. |
| 1.3.6.1.4.1.2011.6.122.26.1.17 | ScalarhwIPSecGlobalWrongSA | read-only | current | Number of discarded packets caused by incorrect security associations. |
| 1.3.6.1.4.1.2011.6.122.26.1.18 | ScalarhwIPSecGlobalBadAuthentication | read-only | current | Number of discarded packets caused by the authentication failure. |
| 1.3.6.1.4.1.2011.6.122.26.1.19 | ScalarhwIPSecGlobalReplay | read-only | current | Number of discarded packets caused by the packet replay. |
| 1.3.6.1.4.1.2011.6.122.26.1.20 | ScalarhwIPSecGlobalPreRecheckErr | read-only | current | Number of discarded packets caused by the pre-check failure. |
| 1.3.6.1.4.1.2011.6.122.26.1.21 | ScalarhwIPSecGlobalPostRecheckErr | read-only | current | Number of discarded packets caused by the post-check failure |
| 1.3.6.1.4.1.2011.6.122.26.1.22 | ScalarhwIPSecGlobalExceedByteLimit | read-only | current | Number of discarded packets caused by the exceeding of the byte limit. |
| 1.3.6.1.4.1.2011.6.122.26.1.23 | ScalarhwIPSecGlobalExceedPacketLimit | read-only | current | Number of discarded packets caused by the exceeding of the packet limit. |
| 1.3.6.1.4.1.2011.6.122.26.1.24 | ScalarhwIPSecGlobalProcessIpv4Err | read-only | current | Number of discarded packets caused by the plain-text forwarding failure. |
| 1.3.6.1.4.1.2011.6.122.26.1.25 | ScalarhwIPSecGlobalFibSearchErr | read-only | current | Number of discarded packets caused by the route check failure. |
| 1.3.6.1.4.1.2011.6.122.26.1.26 | ScalarhwIPSecGlobalIKEInboundOK | read-only | current | Number of received IKE negotiation packets that successfully enter the queue. |
| 1.3.6.1.4.1.2011.6.122.26.1.27 | ScalarhwIPSecGlobalIKEInboundErr | read-only | current | Number of received IKE negotiation packets that fail to enter the queue. |
| 1.3.6.1.4.1.2011.6.122.26.1.28 | ScalarhwIPSecGlobalIKEOutboundOK | read-only | current | Number of sent IKE negotiation packets that successfully enter the queue. |
| 1.3.6.1.4.1.2011.6.122.26.1.29 | ScalarhwIPSecGlobalIKEOutboundErr | read-only | current | Number of sent IKE negotiation packets that fail to enter the queue. |
| 1.3.6.1.4.1.2011.6.122.26.1.30 | ScalarhwIPSecGlobalSoftExpr | read-only | current | Soft timeout times. |
| 1.3.6.1.4.1.2011.6.122.26.1.31 | ScalarhwIPSecGlobalHardExpr | read-only | current | Hard timeout times. |
| 1.3.6.1.4.1.2011.6.122.26.1.32 | ScalarhwIPSecGlobalDPDOper | read-only | current | DPD operation and detection times. |
| 1.3.6.1.4.1.2011.6.122.26.1.33 | ScalarhwIPSecGlobalModpCnt | read-only | current | Modular exponentiation calculation. |
| 1.3.6.1.4.1.2011.6.122.26.1.34 | ScalarhwIPSecGlobalSaeSucc | read-only | current | SAE computing success. |
| 1.3.6.1.4.1.2011.6.122.26.1.35 | ScalarhwIPSecGlobalSoftwareSucc | read-only | current | Software computing success. |
| 1.3.6.1.4.1.2011.6.122.26.2 | TablehwIPSecTunnelConfigTable | not-accessible | current | This table specifies the configuration attributes for Huawei IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1 | RowhwIPSecTunnelConfigEntry | not-accessible | current | Each entry in the hwIPSecTunnelConfigTable holds a set of monitoring configuration parameters associated with an instance of IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.1 | ColumnhwIPSecIfIndex | accessible-for-notify | current | Index of the router interface corresponding to the IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.2 | ColumnhwIPSecTunnelPolicyNum | accessible-for-notify | current | ID of the ACL rule in the current IPSec policy. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.3 | ColumnhwIPSecTunnelIndex | accessible-for-notify | current | Index of the IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.4 | ColumnhwIPSecTunnelRuleId | read-only | current | ID of the ACL rule in the current IPSec policy. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.5 | ColumnhwIPSecTunnelDstIP | read-only | current | Destination IP address of the tunnel (peer end). |
| 1.3.6.1.4.1.2011.6.122.26.2.1.6 | ColumnhwIPSecTunnelInsideIP | read-only | current | Intranet IP address of the peer end during remote access. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.7 | ColumnhwIPSecTunnelRemotePort | read-only | current | Port number of the peer end of the tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.8 | ColumnhwIPSecTunnelCpuID | read-only | current | CPU ID of the tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.9 | ColumnhwIPSecTunnelEncapMode | read-only | current | Encapsulation mode of the tunnel (tunneling mode or transmission mode). |
| 1.3.6.1.4.1.2011.6.122.26.2.1.10 | ColumnhwIPSecTunnelNatTraver | read-only | current | Whether the tunnel needs NAT traversal (If yes, the value is 1.). |
| 1.3.6.1.4.1.2011.6.122.26.2.1.11 | ColumnhwIPSecTunnelFromIKEV2 | read-only | current | Whether the tunnel adopts IKEv2 (If yes, the value is 1.). |
| 1.3.6.1.4.1.2011.6.122.26.2.1.12 | ColumnhwIPSecTunnelEncryptMode | read-only | current | Encryption mode of the tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.13 | ColumnhwIPSecTunnelESPDigestMode | read-only | current | ESP check mode of the tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.14 | ColumnhwIPSecTunnelAHDigestMode | read-only | current | AH check mode of the tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.15 | ColumnhwIPSecTunnelProto | read-only | current | Protocol of the tunnel (ESP or AH, or both). |
| 1.3.6.1.4.1.2011.6.122.26.2.1.16 | ColumnhwIPSecTunnelOutPortIndex | read-only | current | Index of the egress of the tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.17 | ColumnhwIPSecTunnelSrcPort | read-only | current | Indicates the source port number if NAT traversal is adopted. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.18 | ColumnhwIPSecTunnelDstPort | read-only | current | Indicates the destination port number if NAT traversal is adopted. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.19 | ColumnhwIPSecTunnelVrfIndex | read-only | current | VPN ID protected by the tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.20 | ColumnhwIPSecTunnelIfVrfIndex | read-only | current | VPN ID of the sending interface of the tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.21 | ColumnhwIPSecTunnelSrcIP | read-only | current | Source IP address of the tunnel (local end). |
| 1.3.6.1.4.1.2011.6.122.26.2.1.22 | ColumnhwIPSecTunnelSpeedLimitIn | read-only | current | Rate limiting pre-configured in the incoming direction. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.23 | ColumnhwIPSecTunnelSpeedLimitOut | read-only | current | Rate limiting pre-configured in the outgoing direction. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.24 | ColumnhwIPSecTunnelInitiator | read-only | current | Initiator or responder of the IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.25 | ColumnhwIPSecTunnelLifeSize | read-only | current | Life cycle of the IPSec tunnel (in kbytes). |
| 1.3.6.1.4.1.2011.6.122.26.2.1.26 | ColumnhwIPSecTunnelLifeTime | read-only | current | Life cycle of the IPSec tunnel (in seconds). |
| 1.3.6.1.4.1.2011.6.122.26.2.1.27 | ColumnhwIPSecTunnelPolicyName | read-only | current | Security policy for the IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.2.1.28 | ColumnhwIPSecTunnelSaStatus | read-only | current | Status of the SA. |
| 1.3.6.1.4.1.2011.6.122.26.3 | TablehwIPSecTunnelStatsTable | not-accessible | current | This table specifies the status attributes for Huawei IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.3.1 | RowhwIPSecTunnelStatsEntry | not-accessible | current | Each entry in the hwIPSecTunnelConfigTable holds a set of monitoring status parameters associated with an instance of IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.1 | ColumnhwIPSecTunnelSaIDIn | read-only | current | Index of the incoming IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.2 | ColumnhwIPSecTunnelSaIDOut | read-only | current | Index of the outgoing IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.3 | ColumnhwIPSecTunnelFlowSoftExpireIn | read-only | current | Incoming soft timeout traffic (in bytes). |
| 1.3.6.1.4.1.2011.6.122.26.3.1.4 | ColumnhwIPSecTunnelFlowSoftExpireOut | read-only | current | Outgoing soft timeout traffic (in bytes). |
| 1.3.6.1.4.1.2011.6.122.26.3.1.5 | ColumnhwIPSecTunnelFlowHardExpireIn | read-only | current | Incoming hard timeout traffic (in bytes). |
| 1.3.6.1.4.1.2011.6.122.26.3.1.6 | ColumnhwIPSecTunnelFlowHardExpireOut | read-only | current | Outgoing hard timeout traffic (in bytes). |
| 1.3.6.1.4.1.2011.6.122.26.3.1.7 | ColumnhwIPSecTunnelRemainTime | read-only | current | Remaining time of the IPSec tunnel (in seconds). |
| 1.3.6.1.4.1.2011.6.122.26.3.1.8 | ColumnhwIPSecTunnelRemainSize | read-only | current | Remaining bytes of the IPSec tunnel (in kbytes). |
| 1.3.6.1.4.1.2011.6.122.26.3.1.9 | ColumnhwIPSecTunnelSpiIn | read-only | current | Incoming SPI. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.10 | ColumnhwIPSecTunnelSpiOut | read-only | current | Outgoing SPI. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.11 | ColumnhwIPSecTunnelInSideSpiIn | read-only | current | SPI of the internal ESP header when both AH and ESP are adopted in the incoming direction. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.12 | ColumnhwIPSecTunnelInSideSpiOut | read-only | current | SPI of the internal ESP header when both AH and ESP are adopted in the outgoing direction. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.13 | ColumnhwIPSecTunnelESPSequenceNumberIn | read-only | current | Serial number of the incoming ESP protocol. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.14 | ColumnhwIPSecTunnelESPSequenceNumberOut | read-only | current | Serial number of the outgoing ESP protocol. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.15 | ColumnhwIPSecTunnellAHSequenceNumberIn | read-only | current | Serial number of the incoming AH protocol. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.16 | ColumnhwIPSecTunnellAHSequenceNumberOut | read-only | current | Serial number of the outgoing AH protocol. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.17 | ColumnhwIPSecTunnelMemApplyFail | read-only | current | Number of discarded packets because packets to be encrypted are too long. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.18 | ColumnhwIPSecTunnelBadAuth | read-only | current | Number of discarded packets caused by the authentication failure of received packets. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.19 | ColumnhwIPSecTunnelReplay | read-only | current | Number of discarded packets caused by receiving replayed packets. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.20 | ColumnhwIPSecTunnelAfterReCheckErr | read-only | current | Number of discarded packets caused by the decryption post-check failure. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.21 | ColumnhwIPSecTunnelPktDropByteLimitIn | read-only | current | Number of discarded packets caused by the exceeding the byte limit in the incoming direction. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.22 | ColumnhwIPSecTunnelPktDropByteLimitOut | read-only | current | Number of discarded packets caused by the exceeding of the byte limit in the outgoing direction. |
| 1.3.6.1.4.1.2011.6.122.26.3.1.23 | ColumnhwIPSecTunnelFIBSearchErr | read-only | current | Number of discarded packets caused by the route check failure. |
| 1.3.6.1.4.1.2011.6.122.26.4 | TablehwIPSecSaStatisticTable | not-accessible | current | This table specifies the SA numbers of policies which have been bound with interfaces. |
| 1.3.6.1.4.1.2011.6.122.26.4.1 | RowhwIPSecSaStatisticEntry | not-accessible | current | . |
| 1.3.6.1.4.1.2011.6.122.26.4.1.1 | ColumnhwIPSecSaStatisticTunnelPolicyName | read-only | current | Security policy for the IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.4.1.2 | ColumnhwIPSecSaStatisticSaInCnt | read-only | current | Incoming SA number. |
| 1.3.6.1.4.1.2011.6.122.26.4.1.3 | ColumnhwIPSecSaStatisticSaOutCnt | read-only | current | Outgoing SA number. |
| 1.3.6.1.4.1.2011.6.122.26.5 | NodehwIPSecTrapObject | |||
| 1.3.6.1.4.1.2011.6.122.26.5.1 | ScalarhwIPSecTrapTunnelPolicyNum | accessible-for-notify | current | ID of the ACL rule in the current IPSec policy. |
| 1.3.6.1.4.1.2011.6.122.26.5.2 | ScalarhwIPSecTrapIfIndex | accessible-for-notify | current | Index of the router interface corresponding to the IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.5.3 | ScalarhwIPSecTrapTunnelPolicyName | accessible-for-notify | current | Security policy for the IPSec tunnel. |
| 1.3.6.1.4.1.2011.6.122.26.6 | NodehwIPSecNotifications | |||
| 1.3.6.1.4.1.2011.6.122.26.6.1 | NotificationhwIPSecTunnelStart | current | Send the message when the IPSec tunnel is established. | |
| 1.3.6.1.4.1.2011.6.122.26.6.2 | NotificationhwIPSecTunnelStop | current | Send the message when the IPSec tunnel is deleted. | |
| 1.3.6.1.4.1.2011.6.122.26.6.3 | NotificationhwIPSecPolicyAdd | current | Send the message when an IPSec policy is added. | |
| 1.3.6.1.4.1.2011.6.122.26.6.4 | NotificationhwIPSecPolicyDel | current | Send the message when an IPSec policy is deleted. | |
| 1.3.6.1.4.1.2011.6.122.26.6.5 | NotificationhwIPSecPolicyAttach | current | Send the message when an IPSec policy is applied to an interface. | |
| 1.3.6.1.4.1.2011.6.122.26.6.6 | NotificationhwIPSecPolicyDetach | current | Send the message when an IPSec policy is cancelled on an interface. | |
| 1.3.6.1.4.1.2011.6.122.26.6.7 | NotificationhwIPSecIKEReset | current | Send the message when an IKE SA is reset . | |
| 1.3.6.1.4.1.2011.6.122.26.6.8 | NotificationhwIPSecIPSecReset | current | Send the message when an IPSec SA is reset . | |
| 1.3.6.1.4.1.2011.6.122.26.6.9 | NotificationhwIPSecSaReachMax | current | Send the message when IPSec SA Number will Be Reach Max . | |
| 1.3.6.1.4.1.2011.6.122.26.6.10 | NotificationhwIPSecSaReachMaxAtOnce | current | Send the message when IPSec SA Number Reach Max At Once. | |
| 1.3.6.1.4.1.2011.6.122.26.6.11 | NotificationhwIKESaReachMax | current | Send the message when IKE SA Number will Be Reach Max . | |
| 1.3.6.1.4.1.2011.6.122.26.6.12 | NotificationhwIKESaReachMaxAtOnce | current | Send the message when IKE SA Number will Be Reach Max . | |
| 1.3.6.1.4.1.2011.6.122.26.7 | NodehwIPSecMibConformance | |||
| 1.3.6.1.4.1.2011.6.122.26.7.1 | NodehwIPSecMibCompliances | |||
| 1.3.6.1.4.1.2011.6.122.26.7.1.1 | CompliancehwIPSecMibCompliance | current | ||
| 1.3.6.1.4.1.2011.6.122.26.7.2 | NodehwIPSecMibGroups | |||
| 1.3.6.1.4.1.2011.6.122.26.7.2.1 | GrouphwIPSecGlobalStatsGroup | current | This table specifies the global statistics information for Huawei IPSec tunnel. | |
| 1.3.6.1.4.1.2011.6.122.26.7.2.2 | GrouphwIPSecTunnelConfigTableGroup | current | This table specifies the monitoring IPSec tunnel configuration attributes for Huawei IPSec tunnel. | |
| 1.3.6.1.4.1.2011.6.122.26.7.2.3 | GrouphwIPSecTunnelStatsTableGroup | current | This table specifies the monitoring IPSec tunnel statistics attributes for Huawei IPSec tunnel. | |
| 1.3.6.1.4.1.2011.6.122.26.7.2.4 | GrouphwIPSecSaStatisticTableGroup | current | This table specifies the SA numbers of policies which have been bound with interfaces. | |
| 1.3.6.1.4.1.2011.6.122.26.7.2.5 | GrouphwIPSecTrapObjectGroup | current | IPSec trap objects. | |
| 1.3.6.1.4.1.2011.6.122.26.7.2.6 | GrouphwIPSecNotificationsGroup | current | IPSec traps. |