HUAWEI-SHDSL-MIB
97 objects
The HUAWEI SHDSL MIB,extend based on HDSL2-SHDSL-LINE-MIB-rfc4319.mib.
Imported Objects
| HDSL2-SHDSL-LINE-MIB | hdsl2Shdsl15MinIntervalNumber hdsl2Shdsl1DayIntervalNumber hdsl2ShdslEndpointSide hdsl2ShdslEndpointWirePair hdsl2ShdslInvIndex hdsl2ShdslSpanConfProfileEntry hdsl2ShdslSpanConfProfileName hdsl2ShdslSpanStatusEntry hdsl2ShdslStatusActualLineRate |
| HUAWEI-DEVICE-MIB | hwFrameIndex hwPortIndex hwPortOperStatus hwSlotIndex |
| HUAWEI-MIB | huaweiUtility |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.35 | IdentityhwShdsl | The HUAWEI SHDSL MIB,extend based on HDSL2-SHDSL-LINE-MIB-rfc4319.mib. | ||
| 1.3.6.1.4.1.2011.6.35.2 | TablehwShdslPortBindConfTable | not-accessible | current | shdsl port bing configuration Table |
| 1.3.6.1.4.1.2011.6.35.2.1 | RowhwShdslPortBindConfEntry | not-accessible | current | The entry of hwShdslPortBindConfTable. hwShdslGroupIndex should be equal to hwShdslIfIndexFirst. hwShdslIfIndexFirst is the fisrt ifindex of the binding group.… |
| 1.3.6.1.4.1.2011.6.35.2.1.1 | ColumnhwShdslGroupIndex | read-only | current | Group index of the binding group. |
| 1.3.6.1.4.1.2011.6.35.2.1.2 | ColumnhwShdslIfIndexFirst | read-write | current | Fisrt ifindex of the binding group. Should be specified when binding SHDSL port. |
| 1.3.6.1.4.1.2011.6.35.2.1.3 | ColumnhwShdslIfIndexSecond | read-write | current | Second ifindex of the binding group. Should be specified when binding SHDSL port. |
| 1.3.6.1.4.1.2011.6.35.2.1.4 | ColumnhwShdslPortBindRowStatus | read-write | current | rowStatus, which support the createAndGo and destroy. |
| 1.3.6.1.4.1.2011.6.35.3 | TablehwShdslPortBindTable | not-accessible | current | This table supports the configuration of port type in the SLC and SLF board |
| 1.3.6.1.4.1.2011.6.35.3.1 | RowhwShdslPortBindEntry | not-accessible | current | This table supports the configuration of port type in the SLC and SLF board |
| 1.3.6.1.4.1.2011.6.35.3.1.1 | ColumnhwShdslPortBindPriPort | read-only | current | SHDSL bind primary port |
| 1.3.6.1.4.1.2011.6.35.3.1.2 | ColumnhwShdslPortBindType | read-write | current | SHDSL bind type |
| 1.3.6.1.4.1.2011.6.35.3.1.3 | ColumnhwShdslPortBindPortList | read-write | current | SHDSL bind ports cover bits. |
| 1.3.6.1.4.1.2011.6.35.3.1.4 | ColumnhwShdslBindRowStatus | read-write | current | The row administration status, only supporting add or delete. add means bind, delete means undo the bind |
| 1.3.6.1.4.1.2011.6.35.4 | TablehwShdslChipsetModeTable | not-accessible | current | This table supports the configuration of the chipset mode of SHDSL board |
| 1.3.6.1.4.1.2011.6.35.4.1 | RowhwShdslChipsetModeEntry | not-accessible | current | This table supports the configuration of the chipset mode of SHDSL board |
| 1.3.6.1.4.1.2011.6.35.4.1.1 | ColumnhwShdslFrameID | not-accessible | current | FrameID, the frame id of the device |
| 1.3.6.1.4.1.2011.6.35.4.1.2 | ColumnhwShdslSlotID | not-accessible | current | SlotID, the slot id of the device |
| 1.3.6.1.4.1.2011.6.35.4.1.3 | ColumnhwShdslChipsetID | not-accessible | current | ChipsetID, the chipset id of the board |
| 1.3.6.1.4.1.2011.6.35.4.1.4 | ColumnhwShdslChipsetMode | read-write | current | SHDSL Chipset Mode, the pathmode of the chipset |
| 1.3.6.1.4.1.2011.6.35.5 | TablehwShdslSpanConfProfileTable | not-accessible | current | This table supports the configuration of the modulation mode of SHDSL line-profile. |
| 1.3.6.1.4.1.2011.6.35.5.1 | RowhwShdslSpanConfProfileEntry | not-accessible | current | This table supports the configuration of the modulation mode of SHDSL line-profile. |
| 1.3.6.1.4.1.2011.6.35.5.1.1 | Columnhwhdsl2hwShdslSpanConfModulationMode | read-create | current | This object defines the modulation mode in the HDSL2/SHDSL span. |
| 1.3.6.1.4.1.2011.6.35.5.1.2 | Columnhwhdsl2hwShdslSpanConfPathMode | read-create | current | This object defines path mode of line, M-Pair bonding ports can only work in ATM mode, EFM bonding ports work in PTM mode. |
| 1.3.6.1.4.1.2011.6.35.5.1.3 | Columnhwhdsl2hwShdslSpanConfFrameType | read-create | current | This object defines the frame type. |
| 1.3.6.1.4.1.2011.6.35.5.1.4 | Columnhwhdsl2hwShdslSpanConfClkAlign | read-create | current | This object defines the synchronization of the clock for sending and receving. |
| 1.3.6.1.4.1.2011.6.35.6 | TablehwShdslSpanStatusTable | not-accessible | current | This table supports the status information of the modulation mode of SHDSL line-profile. |
| 1.3.6.1.4.1.2011.6.35.6.1 | RowhwShdslSpanStatusEntry | not-accessible | current | This table supports the status information of the modulation mode of SHDSL line-profile. |
| 1.3.6.1.4.1.2011.6.35.6.1.1 | Columnhwhdsl2hwShdslModulationMode | read-create | current | Contains the current modulation mode in the HDSL2/SHDSL span,as reported in an Equipment Response message. |
| 1.3.6.1.4.1.2011.6.35.6.1.2 | Columnhwhdsl2ShdslStatusCurrLoopAttenUs | read-only | current | Contains the current upstream loop attenuation value in the HDSL2/SHDSL span. It ranges from 0 to 128 units of 1dB. |
| 1.3.6.1.4.1.2011.6.35.6.1.3 | Columnhwhdsl2ShdslStatusCurrSnrMarginUs | read-only | current | Contains the current upstream snr margin value in the HDSL2/SHDSL span. |
| 1.3.6.1.4.1.2011.6.35.6.1.4 | Columnhwhdsl2ShdslStatusCurrPboUs | read-only | current | Contains the current upstream Power Back-Off in the HDSL2/SHDSL span. |
| 1.3.6.1.4.1.2011.6.35.6.1.5 | Columnhwhdsl2ShdslStatusNtrMode | read-create | current | Contains the NTR mode. |
| 1.3.6.1.4.1.2011.6.35.6.1.6 | Columnhwhdsl2ShdslStatusCurrLoopAttenDs | read-only | current | Contains the current downstream loop attenuation in the HDSL2/SHDSL span. It ranges from 0 to 128 units of 1dB. |
| 1.3.6.1.4.1.2011.6.35.6.1.7 | Columnhwhdsl2ShdslStatusCurrSnrMarginDs | read-only | current | Contains the current downstream SNR margin in the HDSL2/SHDSL span. |
| 1.3.6.1.4.1.2011.6.35.6.1.8 | Columnhwhdsl2ShdslStatusCurrPboDs | read-only | current | Contains the current downstream Power Back-Off in the HDSL2/SHDSL span. |
| 1.3.6.1.4.1.2011.6.35.7 | TablehwShdslCrossTalkCanellationGroupTable | not-accessible | current | This table supports the configuration of the cross talk cancellation group. |
| 1.3.6.1.4.1.2011.6.35.7.1 | RowhwShdslCrossTalkCanellationGroupEntry | not-accessible | current | This table supports the configuration of the cross talk cancellation group. |
| 1.3.6.1.4.1.2011.6.35.7.1.1 | ColumnhwShdslCrossTalkCanellationGroupIndex | not-accessible | current | The index of shdsl cross talk cancellation group. |
| 1.3.6.1.4.1.2011.6.35.7.1.2 | ColumnhwShdslCrossTalkCanellationGroupPortList | read-write | current | The port list of the shdsl cross talk cancellation group. Port index indicates the port value. |
| 1.3.6.1.4.1.2011.6.35.7.1.3 | ColumnhwShdslCrossTalkCanellationGroupAdminStatus | read-write | current | The administration status of the shdsl cross talk cancellation group. When the administration status is deactivate, the port in the group cannot be activated. |
| 1.3.6.1.4.1.2011.6.35.7.1.4 | ColumnhwShdslCrossTalkCanellationGroupOperStatus | read-only | current | The running status of the shdsl cross talk cancellation group. |
| 1.3.6.1.4.1.2011.6.35.7.1.5 | ColumnhwShdslCrossTalkCanellationGroupRowStatus | read-write | current | This object is used to create a new row or to modify or delete an existing row in this table. |
| 1.3.6.1.4.1.2011.6.35.8 | NodehwShdslTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.35.8.1 | ScalarhwShdsl2ChipsetSwitchResult | accessible-for-notify | current | SHDSL Chipset Switch Result |
| 1.3.6.1.4.1.2011.6.35.8.2 | ScalarhwShdslPortBindOper | accessible-for-notify | current | SHDSL Port Bind operate |
| 1.3.6.1.4.1.2011.6.35.8.3 | ScalarhwShdslPortBindNum | accessible-for-notify | current | SHDSL Bind Port number |
| 1.3.6.1.4.1.2011.6.35.8.4 | ScalarhwhdslSpanConfProfileID | accessible-for-notify | current | Indicate the line template item. |
| 1.3.6.1.4.1.2011.6.35.8.5 | ScalarhwhdslActivationFailureCause | accessible-for-notify | current | Indicate the the reason of the active port fail. |
| 1.3.6.1.4.1.2011.6.35.8.6 | ScalarhwhdslChipsetID | accessible-for-notify | current | ChipsetID, the chipset id of the board. |
| 1.3.6.1.4.1.2011.6.35.9 | NodehwShdslTraps | |||
| 1.3.6.1.4.1.2011.6.35.9.1 | NodehwShdslCommonTraps | |||
| 1.3.6.1.4.1.2011.6.35.9.1.0 | NodehwShdslCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.35.9.1.0.1 | NotificationhwShdslPortStatusChangeTrap | current | shdsl port status change trap. | |
| 1.3.6.1.4.1.2011.6.35.9.1.0.2 | NotificationhwShdslPortBindChangeTrap | current | shdsl port bind change trap. | |
| 1.3.6.1.4.1.2011.6.35.9.1.0.3 | NotificationhwShdslChipsetModeSwitchTrap | current | shdsl chipset mode switch trap. | |
| 1.3.6.1.4.1.2011.6.35.9.2 | NodehwShdslAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.35.9.2.0 | NodehwShdslAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.35.9.2.0.1 | NotificationhwShdslPortActRateLowerThresholdAlarmTrap | current | The activation rate of the xDSL line is lower than the threshold. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.2 | NotificationhwShdslSTUCSnrExceedThresholdAlarmTrap | current | The STU-C SNR margin exceeds the threshold. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.3 | NotificationhwShdslSTUCLoopAtteExceedThreAlarmTrap | current | The STU-C loop attenuation exceeds the threshold. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.4 | NotificationhwShdslSTUCESSExceedThreAlarmTrap | current | The STU-C errored seconds (ESs) exceeds the threshold. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.5 | NotificationhwShdslSTUCSESSExceedThreAlarmTrap | current | The STU-C severely errored seconds (SESs) exceeds the threshold. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.6 | NotificationhwShdslSTUCCRCErrExceedThreAlarmTrap | current | The STU-C CRC errors exceeds the threshold. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.7 | NotificationhwShdslSTUCLOSWExceedThreAlarmTrap | current | The STU-C loss of synchronization word (LOSW) exceeds the threshold. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.8 | NotificationhwShdslSTUCUASSExceedThreAlarmTrap | current | The STU-C unavailable seconds (UASs) exceeds the threshold. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.9 | NotificationhwShdslSTURPowerOffThreAlarmTrap | current | The G.SHDSL STU-R is powered off. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.10 | NotificationhwShdslPortAutoDeactiveAlarmTrap | current | The G.SHDSL port is automatically deactivated due to the line fault. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.11 | NotificationhwShdslPortReactiveAlarmTrap | current | The G.SHDSL port is re-activated after the line recovers. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.12 | NotificationhwShdslConfigParaFailedActivateAlarmTrap | current | The G.SHDSL line configuration parameters fail to activate the port. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.13 | NotificationhwShdslChipsetNotAvailableAlarmTrap | current | The G.SHDSL chipset is not available. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.14 | NotificationhwShdslChipsetRecoverAlarmTrap | current | The G.SHDSL chipset recovers from a fault. | |
| 1.3.6.1.4.1.2011.6.35.9.2.0.15 | NotificationhwShdslPortDeactiveAlarmTrap | current | Some xDSL ports or all the xDSL ports are automatically deactivated due to lack of licenses. | |
| 1.3.6.1.4.1.2011.6.35.10 | TablehwShdslEndpointCurrTable | not-accessible | current | This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines. As with other tables in this MIB module indexed by i… |
| 1.3.6.1.4.1.2011.6.35.10.1 | RowhwShdslEndpointCurrEntry | not-accessible | current | This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines. |
| 1.3.6.1.4.1.2011.6.35.10.1.1 | ColumnhwShdslEndpointCurr15MinStartTime | read-only | current | Start time of the current 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.35.10.1.2 | ColumnhwShdslEndpointCurr1DayStartTime | read-only | current | Start time of the current 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.35.11 | TablehwShdsl15MinIntervalTable | not-accessible | current | This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NO… |
| 1.3.6.1.4.1.2011.6.35.11.1 | RowhwShdsl15MinIntervalEntry | not-accessible | current | This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NO… |
| 1.3.6.1.4.1.2011.6.35.11.1.1 | ColumnhwShdsl15MinIntervalStartTime | read-only | current | Start time of the historical 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.35.12 | TablehwShdsl1DayIntervalTable | not-accessible | current | This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NO… |
| 1.3.6.1.4.1.2011.6.35.12.1 | RowhwShdsl1DayIntervalEntry | not-accessible | current | This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. |
| 1.3.6.1.4.1.2011.6.35.12.1.1 | ColumnhwShdsl1DayIntervalStartTime | read-only | current | Start time of the historical 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.35.13 | NodehwShdslConformance | |||
| 1.3.6.1.4.1.2011.6.35.13.1 | NodehwShdslCompliances | |||
| 1.3.6.1.4.1.2011.6.35.13.1.1 | CompliancehwShdslCompliance | current | The compliance statement for systems supporting this module. | |
| 1.3.6.1.4.1.2011.6.35.13.2 | NodehwShdslObjectGroups | |||
| 1.3.6.1.4.1.2011.6.35.13.2.1 | GrouphwShdslPortBindConfGroup | current | shdsl port bing group configuration. | |
| 1.3.6.1.4.1.2011.6.35.13.2.2 | GrouphwShdslPortBindGroup | current | This table supports the configuration of port type in the SLC and SLF board. | |
| 1.3.6.1.4.1.2011.6.35.13.2.3 | GrouphwShdslChipsetModeGroup | current | This table supports the configuration of the chipset mode of SHDSL board. | |
| 1.3.6.1.4.1.2011.6.35.13.2.4 | GrouphwShdslSpanConfProfileGroup | current | This table supports the configuration of the modulation mode of SHDSL line-profile. | |
| 1.3.6.1.4.1.2011.6.35.13.2.5 | GrouphwShdslSpanStatusGroup | current | This table supports the status information of the modulation mode of SHDSL line-profile. | |
| 1.3.6.1.4.1.2011.6.35.13.2.6 | GrouphwShdslCrossTalkCanellationGroupGroup | current | This table supports the configuration of the cross talk cancellation group. | |
| 1.3.6.1.4.1.2011.6.35.13.2.7 | GrouphwShdslTrapsVbOidsGroup | current | This table contains Shdsl traps Vb Oids. | |
| 1.3.6.1.4.1.2011.6.35.13.2.8 | GrouphwShdslTrapsGroup | current | This table contains Shdsl traps. | |
| 1.3.6.1.4.1.2011.6.35.13.2.9 | GrouphwShdslEndpointCurrGroup | current | This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines. | |
| 1.3.6.1.4.1.2011.6.35.13.2.10 | GrouphwShdsl15MinIntervalGroup | current | This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. | |
| 1.3.6.1.4.1.2011.6.35.13.2.11 | GrouphwShdsl1DayIntervalGroup | current | This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. |