HUAWEI-VDSL-QAM-MIB
163 objects
The MIB module defining objects for the management of a pair of VDSL modems at each end of the VDSL line. Each such line has an entry in an ifTable which may include multiple modem lines. An agent may reside at either end of the VDSL line however the MIB is designed to require no management communication between them beyond that inherent in the low-level VDSL line protocol. The agent may monitor and control this protocol for its needs. VDSL lines may support optional Fast or Interleaved channels. If these are supported, additional entries corresponding to the supported channels must be created in the ifTable. Thus a VDSL line that supports both channels will have three entries in the ifTable, one for each physical, fast, and interleaved, whose ifType values are equal to vdsl(97), fast(125), and interleaved(124), respectively. The ifStackTable is used to represent the relationship between the entries. Naming Conventions: Vtuc Vtur Vtu Curr Prev Atn ES LCS Lof Lol Los Lpr xxxs (e.g., xxx=Lof, Los, Lpr) Max Mgn Min Psd Snr Tx Blks
Imported Objects
| HC-PerfHist-TC-MIB | HCPerfCurrentCount HCPerfIntervalCount |
| HUAWEI-MIB | huaweiMgmt |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.28 | IdentityhwVdslQam | The MIB module defining objects for the management of a pair of VDSL modems at each end of the VDSL line. Each such line has an entry in an ifTable which may i… | ||
| 1.3.6.1.4.1.2011.5.28.1 | NodevdslLineMib | |||
| 1.3.6.1.4.1.2011.5.28.1.0 | NodevdslNotifications | |||
| 1.3.6.1.4.1.2011.5.28.1.0.1 | NotificationvdslPerfLofsThreshNotification | current | Loss of Framing 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.2011.5.28.1.0.2 | NotificationvdslPerfLossThreshNotification | current | Loss of Signal 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.2011.5.28.1.0.3 | NotificationvdslPerfLprsThreshNotification | current | Loss of Power 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.2011.5.28.1.0.4 | NotificationvdslPerfESsThreshNotification | current | Errored Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.2011.5.28.1.0.5 | NotificationvdslInitFailureNotification | current | Vtu initialization failed. See vdslCurrStatus for potential reasons. | |
| 1.3.6.1.4.1.2011.5.28.1.1 | NodevdslMibObjects | |||
| 1.3.6.1.4.1.2011.5.28.1.1.1 | TablevdslLineTable | not-accessible | current | This table includes common attributes describing both ends of the line. It is required for all VDSL physical interfaces. VDSL physical interfaces are those ifE… |
| 1.3.6.1.4.1.2011.5.28.1.1.1.1 | RowvdslLineEntry | not-accessible | current | An entry in the vdslLineTable. |
| 1.3.6.1.4.1.2011.5.28.1.1.1.1.1 | ColumnvdslLineCoding | read-only | current | Specifies the VDSL coding type used on this line. |
| 1.3.6.1.4.1.2011.5.28.1.1.1.1.2 | ColumnvdslLineType | read-only | current | Defines the type of VDSL physical line entity that exists, by defining whether and how the line is channelized. If the line is channelized, the value will be o… |
| 1.3.6.1.4.1.2011.5.28.1.1.1.1.3 | ColumnvdslLineConfProfile | read-write | current | The value of this object identifies the row in the VDSL Line Configuration Profile Table, ( vdslLineConfProfileTable ), which applies for this VDSL line, and c… |
| 1.3.6.1.4.1.2011.5.28.1.1.1.1.4 | ColumnvdslLineAlarmConfProfile | read-write | current | The value of this object identifies the row in the VDSL Line Alarm Configuration Profile Table, ( vdslLineAlarmConfProfileTable ), which applies to this VDSL l… |
| 1.3.6.1.4.1.2011.5.28.1.1.2 | TablevdslPhysTable | not-accessible | current | This table provides one row for each Vtu. Each row contains the Physical Layer Parameters table for that Vtu. VDSL physical interfaces are those ifEntries wher… |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1 | RowvdslPhysEntry | not-accessible | current | An entry in the vdslPhysTable. |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.1 | ColumnvdslPhysSide | read-only | current | Identifies whether the modem is the Vtuc or Vtur. |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.2 | ColumnvdslInvSerialNumber | read-only | current | The vendor specific string that identifies the vendor equipment. |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.3 | ColumnvdslInvVendorID | read-only | current | The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters. |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.4 | ColumnvdslInvVersionNumber | read-only | current | The vendor specific version number sent by this Vtu as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[… |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.5 | ColumnvdslCurrSnrMgn | read-only | current | Noise Margin as seen by this Vtu with respect to its received signal in tenth dB. |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.6 | ColumnvdslCurrAtn | read-only | current | Measured difference in the total power transmitted by the peer Vtu and the total power received by this Vtu. |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.7 | ColumnvdslCurrStatus | read-only | current | Indicates current state of the Vtu line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 los… |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.8 | ColumnvdslCurrOutputPwr | read-only | current | Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence. |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.9 | ColumnvdslCurrAttainableRate | read-only | current | Indicates the maximum currently attainable data rate by the Vtu. This value will be equal or greater than the current line rate. |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.65536 | ColumnhwVdslActualRate | read-only | current | The actual rate of this Vtu. |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.65537 | ColumnhwVdslCurrSnr | read-only | current | Current Signal to Noise Ratio. |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.65538 | ColumnhwVdslMse | read-only | current | Minimum Square Error. |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.65539 | ColumnhwVdslChipHrdVer | read-only | current | VDSL chip hardware version |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.65540 | ColumnhwVdslChipSftVer | read-only | current | VDSL chip software version |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.65541 | ColumnhwVdslChipPatchVer | read-only | current | VDSL chip patch version |
| 1.3.6.1.4.1.2011.5.28.1.1.3 | TablevdslChanTable | not-accessible | current | This table provides one row for each Vtu channel. VDSL channel interfaces are those ifEntries where ifType is equal to interleave(124) or fast(125). |
| 1.3.6.1.4.1.2011.5.28.1.1.3.1 | RowvdslChanEntry | not-accessible | current | An entry in the vdslChanTable. |
| 1.3.6.1.4.1.2011.5.28.1.1.3.1.1 | ColumnvdslChanInterleaveDelay | read-only | current | Interleave Delay for this channel. Interleave delay applies only to the interleave (slow) channel and defines the mapping (relative spacing) between subsequent… |
| 1.3.6.1.4.1.2011.5.28.1.1.3.1.2 | ColumnvdslChanCrcBlockLength | read-only | current | Indicates the length of the channel data-block on which the CRC operates. |
| 1.3.6.1.4.1.2011.5.28.1.1.4 | TablevdslPerfDataTable | not-accessible | current | This table provides one row for each VDSL physical interface. VDSL physical interfaces are those ifEntries where ifType is equal to vdsl(97). |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1 | RowvdslPerfDataEntry | not-accessible | current | An entry in the vdslPerfDataTable. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.1 | ColumnvdslPerfValidIntervals | read-only | current | Valid Intervals per xxxValidInterval definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.2 | ColumnvdslPerfInvalidIntervals | read-only | current | Invalid Intervals per xxxInvalidInterval definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.3 | ColumnvdslPerfLofs | read-only | current | Count of seconds since the unit was last reset that there was Loss of Framing. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.4 | ColumnvdslPerfLoss | read-only | current | Count of seconds since the unit was last reset that there was Loss of Signal. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.5 | ColumnvdslPerfLprs | read-only | current | Count of seconds since the unit was last reset that there was Loss of Power. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.6 | ColumnvdslPerfESs | read-only | current | Count of Errored Seconds since the unit was last reset. An Errored Second is a one-second interval containing one or more crc anomalies, or one or more los def… |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.7 | ColumnvdslPerfInits | read-only | current | Count of the line initialization attempts since the unit was last reset. This count includes both successful and failed attempts. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.8 | ColumnvdslPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.9 | ColumnvdslPerfCurr15MinLofs | read-only | current | Count of seconds during this interval that there was Loss of Framing. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.10 | ColumnvdslPerfCurr15MinLoss | read-only | current | Count of seconds during this interval that there was Loss of Signal. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.11 | ColumnvdslPerfCurr15MinLprs | read-only | current | Count of seconds during this interval that there was Loss of Power. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.12 | ColumnvdslPerfCurr15MinESs | read-only | current | Count of Errored Seconds during this interval. An Errored Second is a one-second interval containing one or more crc anomalies, or one or more los defects. |
| 1.3.6.1.4.1.2011.5.28.1.1.4.1.13 | ColumnvdslPerfCurr15MinInits | read-only | current | Count of the line initialization attempts during this interval. This count includes both successful and failed attempts. |
| 1.3.6.1.4.1.2011.5.28.1.1.5 | TablevdslPerfIntervalTable | not-accessible | current | This table provides one row for each Vtu performance data collection interval. VDSL physical interfaces are those ifEntries where ifType is equal to vdsl(97). |
| 1.3.6.1.4.1.2011.5.28.1.1.5.1 | RowvdslPerfIntervalEntry | not-accessible | current | An entry in the vdslPerfIntervalTable. |
| 1.3.6.1.4.1.2011.5.28.1.1.5.1.1 | ColumnvdslIntervalNumber | not-accessible | current | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.4.1.2011.5.28.1.1.5.1.2 | ColumnvdslIntervalLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing. |
| 1.3.6.1.4.1.2011.5.28.1.1.5.1.3 | ColumnvdslIntervalLoss | read-only | current | Count of seconds in the interval when there was Loss of Signal. |
| 1.3.6.1.4.1.2011.5.28.1.1.5.1.4 | ColumnvdslIntervalLprs | read-only | current | Count of seconds in the interval when there was Loss of Power. |
| 1.3.6.1.4.1.2011.5.28.1.1.5.1.5 | ColumnvdslIntervalESs | read-only | current | Count of Errored Seconds in the interval. An Errored Second is a one-second interval containing one or more crc anomalies, or one or more los defects. |
| 1.3.6.1.4.1.2011.5.28.1.1.5.1.6 | ColumnvdslIntervalInits | read-only | current | Count of the line initialization attempts during this interval. This count includes both successful and failed attempts. |
| 1.3.6.1.4.1.2011.5.28.1.1.6 | TablevdslChanPerfDataTable | not-accessible | current | This table provides one row for each Vtu channel. VDSL channel interfaces are those ifEntries where ifType is equal to interleave(124) or fast(125). |
| 1.3.6.1.4.1.2011.5.28.1.1.6.1 | RowvdslChanPerfDataEntry | not-accessible | current | An entry in the vdslChanPerfDataTable. |
| 1.3.6.1.4.1.2011.5.28.1.1.6.1.1 | ColumnvdslChanPerfValidIntervals | read-only | current | Valid Intervals per xxxValidInterval definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.2011.5.28.1.1.6.1.2 | ColumnvdslChanPerfInvalidIntervals | read-only | current | Invalid Intervals per xxxInvalidInterval definition found in HC-PerfHist-TC-MIB. |
| 1.3.6.1.4.1.2011.5.28.1.1.6.1.3 | ColumnvdslChanCorrectedOctets | read-only | current | Count of corrected octets since the unit was last reset. |
| 1.3.6.1.4.1.2011.5.28.1.1.6.1.4 | ColumnvdslChanUncorrectBlks | read-only | current | Count of uncorrected blocks since the unit was last reset. |
| 1.3.6.1.4.1.2011.5.28.1.1.6.1.5 | ColumnvdslChanPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.4.1.2011.5.28.1.1.6.1.6 | ColumnvdslChanPerfCurr15MinCorrectedOctets | read-only | current | Count of corrected octets in this interval. |
| 1.3.6.1.4.1.2011.5.28.1.1.6.1.7 | ColumnvdslChanPerfCurr15MinUncorrectBlks | read-only | current | Count of uncorrected blocks in this interval. |
| 1.3.6.1.4.1.2011.5.28.1.1.7 | TablevdslChanIntervalTable | not-accessible | current | This table provides one row for each Vtu channel data collection interval. VDSL channel interfaces are those ifEntries where ifType is equal to interleave(124)… |
| 1.3.6.1.4.1.2011.5.28.1.1.7.1 | RowvdslChanIntervalEntry | not-accessible | current | An entry in the vdslChanIntervalTable. |
| 1.3.6.1.4.1.2011.5.28.1.1.7.1.1 | ColumnvdslChanIntervalNumber | not-accessible | current | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.4.1.2011.5.28.1.1.7.1.2 | ColumnvdslChanIntervalCorrectedOctets | read-only | current | Count of corrected octets in this interval. |
| 1.3.6.1.4.1.2011.5.28.1.1.7.1.3 | ColumnvdslChanIntervalUncorrectBlks | read-only | current | Count of uncorrected blocks in this interval. |
| 1.3.6.1.4.1.2011.5.28.1.1.8 | TablevdslLineConfProfileTable | not-accessible | current | This table contains information on the VDSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure … |
| 1.3.6.1.4.1.2011.5.28.1.1.8.1 | RowvdslLineConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of a VDSL modem. A default profile will always exist. This profile's name will be… |
| 1.3.6.1.4.1.2011.5.28.1.1.8.1.1 | ColumnvdslLineConfProfileName | read-create | current | This object is used by the line configuration table in order to identify a row in that table. The system will always provide a default profile whose name is `D… |
| 1.3.6.1.4.1.2011.5.28.1.1.8.1.2 | ColumnvdslLineConfTargetSnrMgn | read-create | current | Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization. |
| 1.3.6.1.4.1.2011.5.28.1.1.8.1.3 | ColumnvdslLineConfTxSpeed | read-create | current | Transmit speed for this modem. The corresponding modem on the other end of the VDSL line will have an equal vdslLineConfRxSpeed value. |
| 1.3.6.1.4.1.2011.5.28.1.1.8.1.4 | ColumnvdslLineConfRxSpeed | read-create | current | Receive speed for this modem. The corresponding modem on the other end of the VDSL line will have an equal vdslLineConfTxSpeed value. |
| 1.3.6.1.4.1.2011.5.28.1.1.8.1.5 | ColumnvdslLineConfProfileRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.2011.5.28.1.1.8.1.65536 | ColumnhwVdslLineConfAutoTrain | read-write | current | This object specifies if the modem is allowed to train automatically. |
| 1.3.6.1.4.1.2011.5.28.1.1.9 | TablevdslLineMCMConfProfileTable | not-accessible | current | This table contains information on the VDSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure … |
| 1.3.6.1.4.1.2011.5.28.1.1.9.1 | RowvdslLineMCMConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of a multiple carrier modulation VDSL modem. A default profile will always exist.… |
| 1.3.6.1.4.1.2011.5.28.1.1.9.1.1 | ColumnvdslMCMConfProfileTxWindowLength | read-create | current | Specifies the length of the transmit window, counted in samples at the sampling rate corresponding to the negotiated value of N. |
| 1.3.6.1.4.1.2011.5.28.1.1.9.1.2 | ColumnvdslMCMConfProfileRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.2011.5.28.1.1.10 | TablevdslLineMCMConfProfileTxBandTable | not-accessible | current | This table contains transmit band descriptor configuration information for a VDSL line. Each entry in this table reflects the configuration for one of possibly… |
| 1.3.6.1.4.1.2011.5.28.1.1.10.1 | RowvdslLineMCMConfProfileTxBandEntry | not-accessible | current | Each entry consists of a transmit band descriptor, which defines the start and stop bands and the power spectral density (PSD) for that band. A default profile… |
| 1.3.6.1.4.1.2011.5.28.1.1.10.1.1 | ColumnvdslMCMConfProfileTxBandNumber | read-create | current | The index for this band descriptor entry. |
| 1.3.6.1.4.1.2011.5.28.1.1.10.1.2 | ColumnvdslMCMConfProfileTxBandStart | read-create | current | Start tone index for this band. |
| 1.3.6.1.4.1.2011.5.28.1.1.10.1.3 | ColumnvdslMCMConfProfileTxBandStop | read-create | current | Stop tone index for this band. |
| 1.3.6.1.4.1.2011.5.28.1.1.10.1.4 | ColumnvdslMCMConfProfileTxBandRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.2011.5.28.1.1.11 | TablevdslLineMCMConfProfileRxBandTable | not-accessible | current | This table contains receive band descriptor configuration information for a VDSL line. Each entry in this table reflects the configuration for one of possibly … |
| 1.3.6.1.4.1.2011.5.28.1.1.11.1 | RowvdslLineMCMConfProfileRxBandEntry | not-accessible | current | Each entry consists of a transmit band descriptor, which defines the start and stop bands and the power spectral density (PSD) for that band. A default profile… |
| 1.3.6.1.4.1.2011.5.28.1.1.11.1.1 | ColumnvdslMCMConfProfileRxBandNumber | read-create | current | The index for this band descriptor entry. |
| 1.3.6.1.4.1.2011.5.28.1.1.11.1.2 | ColumnvdslMCMConfProfileRxBandStart | read-create | current | Start tone index for this band. |
| 1.3.6.1.4.1.2011.5.28.1.1.11.1.3 | ColumnvdslMCMConfProfileRxBandStop | read-create | current | Stop tone index for this band. |
| 1.3.6.1.4.1.2011.5.28.1.1.11.1.4 | ColumnvdslMCMConfProfileRxBandRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.2011.5.28.1.1.12 | TablevdslLineMCMConfProfileTxPSDTable | not-accessible | current | This table contains transmit PSD mask descriptor configuration information for a VDSL line. Each entry in this table reflects the configuration for one tone wi… |
| 1.3.6.1.4.1.2011.5.28.1.1.12.1 | RowvdslLineMCMConfProfileTxPSDEntry | not-accessible | current | Each entry consists of a transmit PSD mask descriptor, which defines the power spectral density (PSD) for a tone. A default profile will always exist. This pro… |
| 1.3.6.1.4.1.2011.5.28.1.1.12.1.1 | ColumnvdslMCMConfProfileTxPSDNumber | read-create | current | The index for this mask descriptor entry. |
| 1.3.6.1.4.1.2011.5.28.1.1.12.1.2 | ColumnvdslMCMConfProfileTxPSDTone | read-create | current | The tone index for which the PSD is being specified. |
| 1.3.6.1.4.1.2011.5.28.1.1.12.1.3 | ColumnvdslMCMConfProfileTxPSDPSD | read-create | current | Power Spectral Density level in steps of 0.5dB with an offset of -140dbm/Hz. |
| 1.3.6.1.4.1.2011.5.28.1.1.12.1.4 | ColumnvdslMCMConfProfileTxPSDRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.2011.5.28.1.1.13 | TablevdslLineMCMConfProfileMaxTxPSDTable | not-accessible | current | This table contains transmit maximum PSD mask descriptor configuration information for a VDSL line. Each entry in this table reflects the configuration for one… |
| 1.3.6.1.4.1.2011.5.28.1.1.13.1 | RowvdslLineMCMConfProfileMaxTxPSDEntry | not-accessible | current | Each entry consists of a transmit PSD mask descriptor, which defines the maximum power spectral density (PSD) for a tone. A default profile will always exist. … |
| 1.3.6.1.4.1.2011.5.28.1.1.13.1.1 | ColumnvdslMCMConfProfileMaxTxPSDNumber | read-create | current | The index for this band descriptor entry. |
| 1.3.6.1.4.1.2011.5.28.1.1.13.1.2 | ColumnvdslMCMConfProfileMaxTxPSDTone | read-create | current | The tone index for which the PSD is being specified. |
| 1.3.6.1.4.1.2011.5.28.1.1.13.1.3 | ColumnvdslMCMConfProfileMaxTxPSDPSD | read-create | current | Power Spectral Density level in steps of 0.5dB with an offset of -140dbm/Hz. |
| 1.3.6.1.4.1.2011.5.28.1.1.13.1.4 | ColumnvdslMCMConfProfileMaxTxPSDRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.2011.5.28.1.1.14 | TablevdslLineMCMConfProfileMaxRxPSDTable | not-accessible | current | This table contains maximum receive PSD mask descriptor configuration information for a VDSL line. Each entry in this table reflects the configuration for one … |
| 1.3.6.1.4.1.2011.5.28.1.1.14.1 | RowvdslLineMCMConfProfileMaxRxPSDEntry | not-accessible | current | Each entry consists of a transmit PSD mask descriptor, which defines the power spectral density (PSD) for a tone. A default profile will always exist. This pro… |
| 1.3.6.1.4.1.2011.5.28.1.1.14.1.1 | ColumnvdslMCMConfProfileMaxRxPSDNumber | read-create | current | The index for this band descriptor entry. |
| 1.3.6.1.4.1.2011.5.28.1.1.14.1.2 | ColumnvdslMCMConfProfileMaxRxPSDTone | read-create | current | The tone index for which the PSD is being specified. |
| 1.3.6.1.4.1.2011.5.28.1.1.14.1.3 | ColumnvdslMCMConfProfileMaxRxPSDPSD | read-create | current | Power Spectral Density level in steps of 0.5dB with an offset of -140dbm/Hz. |
| 1.3.6.1.4.1.2011.5.28.1.1.14.1.4 | ColumnvdslMCMConfProfileMaxRxPSDRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.2011.5.28.1.1.15 | TablevdslLineSCMConfProfileTable | not-accessible | current | This table contains information on the VDSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure … |
| 1.3.6.1.4.1.2011.5.28.1.1.15.1 | RowvdslLineSCMConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of a single carrier modulation VDSL modem. A default profile will always exist. T… |
| 1.3.6.1.4.1.2011.5.28.1.1.15.1.1 | ColumnvdslSCMConfProfileInterleaveDepth | read-create | current | Specifies the interleaving depth. |
| 1.3.6.1.4.1.2011.5.28.1.1.15.1.2 | ColumnvdslSCMConfProfileFastCodewordSize | read-create | current | Specifies the length in octets of the fast codeword. A value of 0 indicates that the single latency transport class is to be utilized. |
| 1.3.6.1.4.1.2011.5.28.1.1.15.1.3 | ColumnvdslSCMConfProfileTransmitPSDMask | read-create | current | The transmit power spectral density mask code. |
| 1.3.6.1.4.1.2011.5.28.1.1.15.1.4 | ColumnvdslSCMConfProfileTransmitPSDLevel | read-create | current | The transmit power spectral density for the VDSL modem. |
| 1.3.6.1.4.1.2011.5.28.1.1.15.1.5 | ColumnvdslSCMConfProfileSymbolRateProfile | read-create | current | The symbol rate profile calculated as S = SR/BSR, where SR is the required symbol rate in kbaud, BSR = 67.5. |
| 1.3.6.1.4.1.2011.5.28.1.1.15.1.6 | ColumnvdslSCMConfProfileConstellationSize | read-create | current | Specifies the constellation size. |
| 1.3.6.1.4.1.2011.5.28.1.1.15.1.7 | ColumnvdslSCMConfProfileCenterFrequency | read-create | current | Specifies the center frequency profile K. |
| 1.3.6.1.4.1.2011.5.28.1.1.15.1.8 | ColumnvdslSCMConfProfileRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.2011.5.28.1.1.16 | TablevdslLineAlarmConfProfileTable | not-accessible | current | This table contains information on the VDSL line alarm configuration. One entry in this table reflects a profile defined by a manager which can be used to conf… |
| 1.3.6.1.4.1.2011.5.28.1.1.16.1 | RowvdslLineAlarmConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of a VDSL line alarm profile. A default profile will always exist. This profile's… |
| 1.3.6.1.4.1.2011.5.28.1.1.16.1.1 | ColumnvdslLineAlarmConfProfileName | read-create | current | This object is used by the line alarm configuration table in order to identify a row in that table. The system will always provide a default profile whose name… |
| 1.3.6.1.4.1.2011.5.28.1.1.16.1.2 | ColumnvdslThresh15MinLofs | read-create | current | This object configures the threshold for the number of loss of frame seconds (lofs) within any given 15-minute performance data collection interval. If the val… |
| 1.3.6.1.4.1.2011.5.28.1.1.16.1.3 | ColumnvdslThresh15MinLoss | read-create | current | This object configures the threshold for the number of loss of signal seconds (loss) within any given 15-minute performance data collection interval. If the va… |
| 1.3.6.1.4.1.2011.5.28.1.1.16.1.4 | ColumnvdslThresh15MinLprs | read-create | current | This object configures the threshold for the number of loss of power seconds (lprs) within any given 15-minute performance data collection interval. If the val… |
| 1.3.6.1.4.1.2011.5.28.1.1.16.1.5 | ColumnvdslThresh15MinESs | read-create | current | This object configures the threshold for the number of errored seconds (lofs) within any given 15-minute performance data collection interval. If the value of … |
| 1.3.6.1.4.1.2011.5.28.1.1.16.1.6 | ColumnvdslInitFailureNotificationEnable | read-create | current | This object specifies if a vdslInitFailureNotification notification will be generated if an initialization failure occurs. |
| 1.3.6.1.4.1.2011.5.28.1.1.16.1.7 | ColumnvdslLineAlarmConfProfileRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.2011.5.28.1.1.65536 | TablehwVdslEtherStatsTable | not-accessible | current | This table provides one row for each Vtu. Each row contains the ehternet statistic Parameters table for that Vtu.This table is Ether state for VDSL table. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1 | RowhwVdslEtherStatsEntry | not-accessible | current | An entry in the hwVdslEtherStatsTable. This table defines and collects the statistical data of Ether. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.1 | ColumnhwVdslEtherStatsAlignmentErrors | read-only | current | The total number of frames received with alignment errors (an odd number of nibbles). |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.2 | ColumnhwVdslEtherStatsSingleCollisionFrames | read-only | current | A count of successfully transmitted frames for which transmission was inhibited by exactly one collision. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.3 | ColumnhwVdslEtherStatsMultipleCollisionFrames | read-only | current | A count of successfully transmitted frames for which transmission was inhibited by more than one collision. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.4 | ColumnhwVdslEtherStatsDeferredTransmissions | read-only | current | A count of frames for which the first transmission attempt was delayed because the Ethernet media was busy. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.5 | ColumnhwVdslEtherStatsLateCollisionFrames | read-only | current | The total number of times that a collision was detected on a particular interface later than 512 bit-times into the transmission of a packet. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.6 | ColumnhwVdslEtherStatsExcessiveCollisionFrames | read-only | current | A count of frames for which transmission failed due to excessive collisions. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.7 | ColumnhwVdslEtherStatsReceiveErrors | read-only | current | The total number of frames received with less than 64 bytes. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.8 | ColumnhwVdslEtherStatsCarrierErrors | read-only | current | The total number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.9 | ColumnhwVdslEtherStatsTooLongErrors | read-only | current | The total number of frames received with more than maximum length. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.10 | ColumnhwVdslEtherStatsSequenceErrors | read-only | current | The total number of frames received that had a bad Frame Check Sequence (FCS). |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.11 | ColumnhwVdslEtherStatsTransmitOctets | read-only | current | A count of data and padding octets of frames that are successfully transmitted. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.12 | ColumnhwVdslEtherStatsReceiveOctets | read-only | current | A count of data and padding octets of frames that are successfully received. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.13 | ColumnhwVdslEtherStatsReceiveBroadcastFrames | read-only | current | A count of frames that are successfully received and are directed to the broadcast group address. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.14 | ColumnhwVdslEtherStatsReceivePauseFrames | read-only | current | The total number of PAUSE packets received. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.15 | ColumnhwVdslEtherStatsTransmitPauseFrames | read-only | current | The total number of PAUSE packets transmitted. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.16 | ColumnhwVdslEtherStatsTransmitFrames | read-only | current | The total number of valid data frames that have been transferred over the transmit channel. |
| 1.3.6.1.4.1.2011.5.28.1.1.65536.1.17 | ColumnhwVdslEtherStatsReceiveFrames | read-only | current | The total number of valid data frames that have been transferred over the receive channel. |
| 1.3.6.1.4.1.2011.5.28.1.3 | NodevdslConformance | |||
| 1.3.6.1.4.1.2011.5.28.1.3.1 | NodevdslGroups | |||
| 1.3.6.1.4.1.2011.5.28.1.3.1.1 | GroupvdslGroup | current | A collection of objects providing information about a VDSL Line. | |
| 1.3.6.1.4.1.2011.5.28.1.3.1.2 | GroupvdslMCMGroup | current | A collection of objects providing configuration information for a VDSL line based upon multiple carrier modulation modem. | |
| 1.3.6.1.4.1.2011.5.28.1.3.1.3 | GroupvdslSCMGroup | current | A collection of objects providing configuration information for a VDSL line based upon single carrier modulation modem. | |
| 1.3.6.1.4.1.2011.5.28.1.3.1.4 | GroupvdslNotificationGroup | current | This group supports notifications of significant conditions associated with VDSL Lines. | |
| 1.3.6.1.4.1.2011.5.28.1.3.2 | NodevdslCompliances | |||
| 1.3.6.1.4.1.2011.5.28.1.3.2.1 | CompliancevdslLineMibCompliance | current | The compliance statement for SNMP entities which manage VDSL interfaces. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VdslLineCodingType | INTEGER { other(1), mcm(2), scm(3) } | current | This data type is used as the syntax for the VDSL Line Code. |
| VdslLineEntity | INTEGER { vtuc(1), vtur(2) } | current | Identifies a modem as being either Vtuc or Vtur. A VDSL line consists of two modems, a Vtuc and a Vtur. |