HUAWEI-VDSL2-LINE-TC-MIB
58 objects
VDSL text conventions and common defination.
Imported Objects
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-SMI | MODULE-IDENTITY TimeTicks |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.115 | IdentityvdslTCMIB | VDSL text conventions and common defination. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Vdsl2Actmode | INTEGER { adsl (1), adsl2 (2), adsl2plus (3), vdsl (4), vdsl2 (5), invalidValue(-1) } | current | Possible actived mode after training between co and cpe. Options: 1. adsl (1) - Indicates adsl 2. adsl2 (2) - Indicates adsl2 3. adsl2plus (3) - Indicates adsl2plus 4. vdsl (4) - Indicates vdsl 5. vdsl2 (5) - Indicates … |
| Vdsl2AutoProfile | INTEGER { disable(1), enable(2) } | current | Enables or disables the auto profile of a line. Options: 1. disable(1) - Disables the auto profile of a line 2. enable(2) - Enables the auto profile of a line |
| Vdsl2BandOptUsage | INTEGER { unused(1), used(2) } | current | Defines the VDSL2 link use of the optional frequency range [25kHz - 138kHz] (Opt). Options: 1. unused(1) - Indicates Opt is unused 2. used(2) - Indicates Opt is used |
| Vdsl2BandPlan | OCTET STRING (SIZE(0..96)) | current | Huawei defined. Vdsl2 bandplay type. |
| Vdsl2BitSwap | INTEGER { disable(1), enable(2) } | current | Enables or disables the bit swap upstream or downstream of a line. Options: 1. disable(1) - Disables the bit swap upstream or downstream of a line 2. enable(2) - Enables the bit swap upstream or downstream of a line |
| Vdsl2CfgMode | INTEGER { tr129Mode(1), tiMode(2), tr165Mode(3) } | current | The configured VDSL management mode. Specified as an INTEGER. Options: 1. tr129Mode(1) - VDSL management mode 2. tiMode(2) - TIVDSL management mode 3. tr165Mode(3) - TR165VDSL management mode |
| Vdsl2ChAtmStatus | BITS { noDefect(0), noCellDelineation(1), lossOfCellDelineation(2) } | current | Attributes with this syntax are status parameters that reflect the failure status for Transmission Convergence (TC) layer of a given ATM interface (data path over anVDSL2 link). This BITS structure can report the follow… |
| Vdsl2ChEnabling | INTEGER { enable(1), disable(2) } | current | Indicates if the bearer channel is enabling. Options: 1. enable(1) - Indicates if the bearer channel is enable 2. disable(2) - Indicates if the bearer channel is disable |
| Vdsl2ChPtmStatus | BITS { noDefect(0), outOfSync(1) } | current | Attributes with this syntax are status parameters that reflect the failure status for a given PTM interface (packet data path over an VDSL2 link). This BITS structure can report the following failures: 1. noDefect (0) -… |
| Vdsl2ConfPmsForce | INTEGER { l3toL0 (0), l0toL2 (2), l0orL2toL3 (3), invalidValue(-1) } | current | Attributes with this syntax are configuration parameters that reference the desired power management state for the VDSL2 link. Options: 1. l3toL0(1) - Perform a transition from L3 to L0 (Full power management state) 2. … |
| Vdsl2DataPathMode | INTEGER { atm(1), ptm(2), both(3) } | current | The channel data path mode. Options: 1. atm(1) - The channel data path mode is atm 2. ptm(2) - The channel data path mode is ptm 3. both(3) - The channel data path mode is both |
| Vdsl2DataPathModeType | INTEGER { atm(1), ptm(2) } | current | A set of VDSL2 line data path modes, with one bit per mode. Options: 1. Atm(1) - Atm path mode 2. Ptm(2) - Ptm path mode |
| Vdsl2Direction | INTEGER { upstream(1), downstream(2) } | current | Identifies the direction of a band as being either upstream or downstream. Specified as an INTEGER. Options: 1. upstream(1) - Identifies upstream direction 2. downstream(2) - Identifies downstream direction |
| Vdsl2DpboEpsd | OCTET STRING (SIZE(0..48)) | current | This is a structure that represents up to 16 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the PSD … |
| Vdsl2DpboEscm | OCTET STRING (SIZE(0..6)) | current | Octets 0+1 DPBOESCMA Octets 2+3 DPBOESCMB Octets 4+5 DPBOESCMC Each scalar value from 0 to 640 |
| Vdsl2ForceINP | INTEGER { force(1), auto(2) } | current | Force the INP greater than or equal to the minimal INP. Options: 1. forced(1) - Force the INP greater 2. auto(2) - Auto the INP greater |
| Vdsl2InitResult | INTEGER { noFail(0), configError(1), configNotFeasible(2), commFail(3), noPeerXtu(4), otherCause(5), ginpNotSelected(6), invalidValue(-1) } | current | Specifies the result of full initialization attempt. Options: 1. noFail (0) - Successful initialization 2. configError (1) - Configuration failure 3. configNotFeasible (2) - Configuration details not supported 4. commFa… |
| Vdsl2LastTransmittedState | INTEGER { xtucG9941(0), xtucQuiet1(1), xtucComb1(2), xtucQuiet2(3), xtucComb2(4), xtucIcomb1(5), xtucLineprob(6), xtucQuiet3(7), xtucComb3(8), xtucIComb2(9), xtucMsgfmt(10), xtucMsgpcb(11), xtucQuiet4(12), xtucReverb1(13), xtucTref1(14), xtucReverb2(15), xtucEct(16), xtucReverb3(17), xtucTref2(18), xtucReverb4(19), xtucSegue1(20), xtucMsg1(21), xtucReverb5(22), xtucSegue2(23), xtucMedley(24), xtucExchmarker(25), xtucMsg2(26), xtucReverb6(27), xtucSegue3(28), xtucParams(29), xtucReverb7(30), xtucSegue4(31), xtucShowtime(32), xturG9941(100), xturQuiet1(101), xturComb1(102), xturQuiet2(103), xturComb2(104), xturIcomb1(105), xturLineprob(106), xturQuiet3(107), xturComb3(108), xturIcomb2(109), xturMsgfmt(110), xturMsgpcb(111), xturReverb1(112), xturQuiet4(113), xturReverb2(114), xturQuiet5(115), xturReverb3(116), xturEct(117), xturReverb4(118), xturSegue1(119), xturReverb5(120), xturSegue2(121), xturMsg1(122), xturMedley(123), xturExchmarker(124), xturMsg2(125), xturReverb6(126), xturSegue3(127), xturParams(128), xturReverb7(129), xturSegue4(130), xturShowtime(131), invalidValue(-1) } | current | This parameter represents the last successful transmitted initialization state in the last full initialization performed on the line. |
| Vdsl2LConfProfPmMode | BITS { allowTransitionsToIdle(0), allowTransitionsToLowPower(1) } | current | Attributes with this syntax are configuration parameters that reference the power modes/states into which the xTU-C or xTU-R may autonomously transit. It is a BITS structure that allows control of the following transit … |
| Vdsl2LdsfResult | INTEGER { none (1), success (2), inProgress (3), unsupported (4), cannotRun (5), aborted (6), failed (7), illegalMode (8), adminUp (9), tableFull (10), noResources (11) } | current | Possible failure reasons associated with performing Dual Ended Loop Test (DELT) on a DSL line. Options: 1. none (1) - The default value in case LDSF was never requested for the associated line. 2. success (2) - The rece… |
| Vdsl2LineLdsf | INTEGER { inhibit(0), force(1), invalidValue(-1) } | current | Attributes with this syntax are configuration parameters that control the Loop Diagnostic mode for the VDSL2 link. Options: 1. inhibit (0) - Inhibit Loop Diagnostic mode 2. force (1) - Force/Initiate Loop Diagnostic mod… |
| Vdsl2LineStatus | BITS { noDefect(0), lossOfFraming(1), lossOfSignal(2), lossOfPower(3), initFailure(4) } | current | Attributes with this syntax are status parameters that reflect the failure status for a given endpoint of VDSL2 link. This BITS structure can report the following failures: 1. noDefect (0) - This bit position positively… |
| Vdsl2MaxBer | INTEGER { eminus3(1), eminus5(2), eminus7(3) } | current | Attributes with this syntax are configuration parameters that reference the maximum Bit Error Rate (BER). Options: 1. eminus3 (1) - Maximum BER=E^-3 2. eminus5 (2) - Maximum BER=E^-5 3. eminus7 (3) - Maximum BER=E^-7 |
| Vdsl2OperationModes | INTEGER { defMode (1), adsl (2), adsl2Pots (3), adsl2Isdn (4), adsl2PlusPots (5), adsl2PlusIsdn (6), adsl2ReachExtended (7), vdsl2Pots (8), vdsl2Isdn (9) } | current | The VDSL2 management model specified includes an VDSL Mode attribute which identifies an instance of VDSL Mode-Specific PSD Configuration object in the VDSL Line Profile. The following classes of VDSL operating mode are… |
| Vdsl2PhyRControl | INTEGER { enable(1), disable(2) } | current | To enable or disable the retransmission function. Options: 1. enable(1) - Enable the retransmission function 2. disable(2) - Disable the retransmission function |
| Vdsl2PowerMngState | INTEGER { l0(0), l1(1), l2(2), l3(3), invalidValue(-1) } | current | Attributes with this syntax uniquely identify each power management state defined for the VDSL2 link. Options: 1. l0(0) - Full power management state 2. l1(1) - Low power management state (for G.992.2) 3. l2(2) - Low po… |
| Vdsl2Profiles | INTEGER { profile8a (1), profile8b (2), profile8c (3), profile8d (4), profile12a (5), profile12b (6), profile17a (7), profile30a (8), invalidValue(-1) } | current | This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. Options: 1. profile8a(1) - Profile 8a 2. profile8b(2) - Profile 8b 3. profile8c(3) - Profile 8c 4. profile8d(4) … |
| Vdsl2ProfSwitchType | INTEGER { enable(1), disable(2) } | current | Enables or disables the bit swap upstream or downstream of a line. Options: 1. enable(1) - Enables the bit swap upstream or downstream of a line 2. disable(2) - Disables the bit swap upstream or downstream of a line |
| Vdsl2PSDClassMask | INTEGER { annexA998-D-32 (1), annexA998-D-64 (2), annexB997-M1c-A-7 (3), annexB997-M1x-M-8 (4), annexB997-M1x-M (5), annexB997-M2x-M-8 (6), annexB997-M2x-A (7), annexB997-M2x-M (8), annexB998-M1x-A (9), annexB998-M1x-B (10), annexB998-M1x-NUS0 (11), annexB998-M2x-A (12), annexB998-M2x-M (13), annexB998-M2x-B (14), annexB998-M2x-NUS0 (15), annexBHPE17-M1-NUS0 (16), annexBHPE30-M1-NUS0 (17), annexB997E17-M2x-A (18), annexB997E30-M2x-NUS0 (19), annexB998E17-M2x-NUS0 (20), annexB998E17-M2x-NUS0-M (21), annexB998ADE17-M2x-NUS0-M (22), annexB998ADE17-M2x-B (23), annexB998E30-M2x-NUS0 (24), annexB998E30-M2x-NUS0-M (25), annexB998ADE30-M2x-NUS0-M (26), annexB998ADE17-M2x-A (27), annexB998ADE30-M2x-NUS0-A (28), annexA998-D-48 (29), annexA998-D-128 (30), annexB998ADE17-M2x-M (31), annexB998E17-M2x-A (32), invalidValue (-1) } | current | In order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: - Class 998 Annex A: D-32, D-64, D-48, D-128. - Class 997-M1c Annex B: 997-M1c-A-7. - Clas… |
| Vdsl2PsdLimitMask | INTEGER { annexA998-D-32 (1), annexA998-D-64 (2), annexB997-M1c-A-7 (3), annexB997-M1x-M-8 (4), annexB997-M1x-M (5), annexB997-M2x-M-8 (6), annexB997-M2x-A (7), annexB997-M2x-M (8), annexB998-M1x-A (9), annexB998-M1x-B (10), annexB998-M1x-NUS0 (11), annexB998-M2x-A (12), annexB998-M2x-M (13), annexB998-M2x-B (14), annexB998-M2x-NUS0 (15), annexBHPE17-M1-NUS0 (16), annexBHPE30-M1-NUS0 (17), annexB997E17-M2x-A (18), annexB997E30-M2x-NUS0 (19), annexB998E17-M2x-NUS0 (20), annexB998E17-M2x-NUS0-M (21), annexB998ADE17-M2x-NUS0-M (22), annexB998ADE17-M2x-B (23), annexB998E30-M2x-NUS0 (24), annexB998E30-M2x-NUS0-M (25), annexB998ADE30-M2x-NUS0-M (26), annexB998ADE17-M2x-A (27), annexB998ADE30-M2x-NUS0-A (28), annexA998-D-48 (29), annexA998-D-128 (30), annexB998ADE17-M2x-M (31) } | current | The G.993.2 limit PSD mask for each class of profile. The profiles are grouped in following profile classes: - Class 8: Profiles 8a, 8b, 8c, 8d - Class 12: Profiles 12a, 12b - Class 17: Profile 17a - Class 30: Profile 3… |
| Vdsl2PsdMaskDs | OCTET STRING (SIZE(0..96)) | current | This is a structure that represents up to 32 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the PSD … |
| Vdsl2PsdMaskUs | OCTET STRING (SIZE(0..48)) | current | This is a structure that represents up to 16 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the PSD … |
| Vdsl2RaMode | INTEGER { manual(1), raInit(2), dynamic(3) } | current | Specifies the rate adaptation behavior for the line. Options: 1. manual (1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified rate. 2. rainit (2) - Rate-Adaptation during initializa… |
| Vdsl2Rfi | OCTET STRING (SIZE(0..512)) | current | Each one of the 4096 bits in this OCTET STRING array represents the corresponding bin in the downstream direction. A value of one indicates that the bin is part of a notch filter. |
| Vdsl2ScMaskDs | OCTET STRING (SIZE(0..64)) | current | Each one of the 512 bits in this OCTET STRING array represents the corresponding bin in the downstream direction. A value of one indicates that the bin is not in use. |
| Vdsl2ScMaskUs | OCTET STRING (SIZE(0..8)) | current | Each one of the 64 bits in this OCTET STRING array represents the corresponding bin in the downstream direction. A value of one indicates that the bin is not in use. |
| Vdsl2StatusRtxUsed | INTEGER { rtxInuse(1), rtxUnusedModeForbidden(2), rtxUnusedNotSupportedXtuc(3), rtxUnusedNotSupportedXtur(4), rtxUnusedNotSupportedXtucAndXtur(5), invalidValue(-1) } | current | This parameter specifies whether G.998.4 retransmission is used in a given transmit direction. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MODE = FORBIDDEN 3. rtxUnused… |
| Vdsl2SubProfiles | INTEGER { profile8a(1), profile8b(2), profile8c(3), profile8d(4), profile12a(5), profile12b(6), profile17a(7), profile30a(8), invalidValue(-1) } | current | Attributes with this syntax are configuration parameters that reference the G.993.2 profiles to be allowed by the near-end xTU on this line. Options: 1. profile8a(1) - Profile 8a 2. profile8b(2) - Profile 8b 3. profile8… |
| Vdsl2SubProfilesWeight | INTEGER { priorityWeight1(1), priorityWeight2(2), priorityWeight3(3) } | current | Attributes with this syntax are configuration parameters that reference the G.993.2 profiles to be allowed by the near-end xTU on this line. Options: 1. priorityWeight1(1) - Indicates priority-weight1 2. priorityWeight2… |
| Vdsl2SymbolProtectionDs | INTEGER { noProtection (1), halfSymbol (2), singleSymbol (3), twoSymbols (4), threeSymbols (5), fourSymbols (6), fiveSymbols (7), sixSymbols (8), sevenSymbols (9), eightSymbols (10), nineSymbols (11), tenSymbols (12), elevenSymbols (13), twelveSymbols (14), thirteenSymbols (15), fourteenSymbols (16), fifteenSymbols (17), sixteenSymbols (18) } | current | Attributes with this syntax are configuration parameters that reference the minimum length impulse noise protection (INP) in terms of number of symbols. The possible values are: noProtection (i.e., INP not required), ha… |
| Vdsl2SymbolProtectionUs | INTEGER { noProtection (1), halfSymbol (2), singleSymbol (3), twoSymbols (4), threeSymbols (5), fourSymbols (6), fiveSymbols (7), sixSymbols (8), sevenSymbols (9), eightSymbols (10), nineSymbols (11), tenSymbols (12), elevenSymbols (13), twelveSymbols (14), thirteenSymbols (15), fourteenSymbols (16), fifteenSymbols (17), sixteenSymbols (18) } | current | Attributes with this syntax are configuration parameters that reference the minimum length impulse noise protection (INP) in terms of number of symbols. The possible values are: noProtection (i.e., INP not required), ha… |
| Vdsl2TIPsdClassMask | INTEGER { none(1), a998B997M1cC998(2), b997M1x(3), b997M2x(4), b998M1x(5), b998M2x(6), invalidValue(-1) } | current | VDSL2 PSD Mask Class. The limit Power Spectral Density masks are grouped in the following PSD mask classes: Class 998 Annex A: D-32, D-64, D-48, D-128. Class 997-M1c Annex B: 997-M1c-A-7. Class 997-M1x Annex B: 997-M1x-… |
| Vdsl2TransmissionModeType | BITS { ansit1413(0), etsi(1), g9921PotsNonOverlapped(2), g9921PotsOverlapped(3), g9921IsdnNonOverlapped(4), g9921isdnOverlapped(5), g9921tcmIsdnNonOverlapped(6), g9921tcmIsdnOverlapped(7), g9922potsNonOverlapeed(8), g9922potsOverlapped(9), g9922tcmIsdnNonOverlapped(10), g9922tcmIsdnOverlapped(11), g9921tcmIsdnSymmetric(12), reserved1(13), reserved2(14), reserved3(15), reserved4(16), reserved5(17), g9923PotsNonOverlapped(18), g9923PotsOverlapped(19), g9923IsdnNonOverlapped(20), g9923isdnOverlapped(21), reserved6(22), reserved7(23), g9924potsNonOverlapeed(24), g9924potsOverlapped(25), reserved8(26), reserved9(27), g9923AnnexIAllDigNonOverlapped(28), g9923AnnexIAllDigOverlapped(29), g9923AnnexJAllDigNonOverlapped(30), g9923AnnexJAllDigOverlapped(31), g9924AnnexIAllDigNonOverlapped(32), g9924AnnexIAllDigOverlapped(33), g9923AnnexLMode1NonOverlapped(34), g9923AnnexLMode2NonOverlapped(35), g9923AnnexLMode3Overlapped(36), g9923AnnexLMode4Overlapped(37), g9923AnnexMPotsNonOverlapped(38), g9923AnnexMPotsOverlapped(39), g9925PotsNonOverlapped(40), g9925PotsOverlapped(41), g9925IsdnNonOverlapped(42), g9925isdnOverlapped(43), reserved10(44), reserved11(45), g9925AnnexIAllDigNonOverlapped(46), g9925AnnexIAllDigOverlapped(47), g9925AnnexJAllDigNonOverlapped(48), g9925AnnexJAllDigOverlapped(49), g9925AnnexMPotsNonOverlapped(50), g9925AnnexMPotsOverlapped(51), reserved12(52), reserved13(53), reserved14(54), reserved15(55), reserved16(56), reserved17(57), reserved18(58), reserved19(59), reserved20(60), reserved21(61), reserved22(62), reserved23(63), reserved24(64), reserved25(65), reserved26(66), reserved27(67), reserved28(68), reserved29(69), reserved30(70), reserved31(71), g9932AnnexAPots(72), g9932AnnexAIsdn(73), g9932AnnexBPots(74), g9932AnnexBIsdn(75), g9932AnnexCPots(76), g9932AnnexCIsdn(77), g9935(78), g9935FriendlyDs(79), g9935FullFriendly(80), reserved32(81) } | current | A set of VDSL2 line transmission modes, with one bit per mode. The notes (F) and (L) denote Full-Rate and Lite/splitterless respectively: Bit 00 : Regional Std. (ANSI T1.413) (F) Bit 01 : Regional Std. (ETSI DTS/TM06006… |
| Vdsl2Tssi | OCTET STRING (SIZE(0..96)) | current | This is a structure that represents up to 32 transmit spectrum shaping (TSSi) breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The th… |
| Vdsl2Unit | INTEGER { xtuc(1), xtur(2) } | current | Identifies a transceiver as being either xtuc or xtur. An VDSL line consists of two transceivers, an xtuc and an xtur. Attributes with this syntax reference the two sides of a line. Specified as an INTEGER. Options: 1. … |
| Vdsl2UpboBoostMode | INTEGER { disable(1), enable(2) } | current | Options: 1. disable(1) - The Equalized FEXT UPBO method is not supported 2. enable(2) - The Equalized FEXT UPBO method is supported |
| Vdsl2UpboKl0RefBand | OCTET STRING (SIZE(0..8)) | current | Octets 0+1 - length[1] Octets 2+3 - length[2] Octets 4+5 - length[3] Octets 6+7 - length[4] |
| Vdsl2UpboKlf | INTEGER { forced(1), auto(2)} | current | Options: 1.forced(1) - Indicates UPBOKL is forced by the VTU-O 2.auto(2) - Indicates UPBOKL shall be autonomously selected by the VTU-O |
| Vdsl2UpboPsdBand | OCTET STRING (SIZE(0..20)) | current | Octets 0+1 - a[0] Octets 2+3 - b[0] Octets 4+5 - a[1] Octets 6+7 - b[1] Octets 8+9 - a[2] Octets 10+11 - b[2] Octets 12+13 - a[3] Octets 14+15 - b[3] Octets 16+17 - a[4] Octets 18+19 - b[4] |
| Vdsl2UpsPsdMaskSelection | INTEGER { adlu32Eu32(1), adlu36Eu36(2), adlu40Eu40(3), adlu44Eu44(4), adlu48Eu48(5), adlu52Eu52(6), adlu56Eu56(7), adlu60Eu60(8), adlu64Eu64(9) } | current | This is a structure that represents up to 16 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the PSD … |
| Vdsl2Us0Disable | INTEGER { unused(1), used(2) } | current | For each limit PSD mask enabled in the LIMITMASK parameter, a bit shall indicate if US0 is disabled. The disabling parameter is coded as a bit-map. The bit is set to 1 if US0 is disabled for the associated limit mask. T… |
| Vdsl2Us0PsdMask | INTEGER { adlu32Eu32(1), adlu36Eu36(2), adlu40Eu40(3), adlu44Eu44(4), adlu48Eu48(5), adlu52Eu52(6), adlu56Eu56(7), adlu60Eu60(8), adlu64Eu64(9), adlu128Eu128(10) } | current | This parameter contains the US0 PSD masks to be allowed by the near-end xTU on the line. This parameter is only defined for G.993.2 Annex A. Options: 1. adlu32Eu32(1) - ADLU-32/EU-32 2. adlu36Eu36(2) - ADLU-36/EU-36 3. … |
| Vdsl2vdsltoneblackout | OCTET STRING (SIZE(0..512)) | current | Each one of the 4096 bits in this OCTET STRING array represents the corresponding bin of the subcarriers. A value of one indicates that the bin is part of subcarriermask. |
| Vdsl2VirtualNoise | INTEGER { disable(1), enable(2) } | current | Enables or disables the Virtual Noise upstream or downstream of a line. Options: 1. disable(1) - Disables the Virtual Noise upstream or downstream of a line 2. enable(2) - Enables the Virtual Noise upstream or downstrea… |
| Vdsl2VirtualNoiseDs | OCTET STRING (SIZE(0..96)) | current | This is a structure that represents up to 32 Virtual Noise breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the… |
| Vdsl2VirtualNoiseUs | OCTET STRING (SIZE(0..48)) | current | This is a structure that represents up to 16 Virtual Noise breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the… |
| Xdsl2Band | INTEGER { upstream(1), downstream(2), us0(3), ds1(4), us1(5), ds2(6), us2(7), ds3(8), us3(9), ds4(10), us4(11) } | current | Identifies a band in a VDSL2/ADSL/ADSL2/ADSL2+ link. For a band in the upstream direction, transmission is from the remote end (xTU-R) towards the central office end (xTU-C). A band in the upstream direction is indicate… |