MIB Viewer

HWMUSA-SHDSL-CPE-MIB

191 objects
No module-level DESCRIPTION found.
Imported Objects
HUAWEI-MIBhwProducts
IF-MIBifIndex
RFC1213-MIBDisplayString
SNMPv2-SMIGauge32 IpAddress OBJECT-TYPE Unsigned32
SNMPv2-TCTruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.2011.2.6Nodemusa
1.3.6.1.4.1.2011.2.6.7Nodeias
1.3.6.1.4.1.2011.2.6.7.4NodehwIasService
1.3.6.1.4.1.2011.2.6.7.4.4NodehwMusaShdsl
1.3.6.1.4.1.2011.2.6.7.4.4.2NodehwShdslCPE
1.3.6.1.4.1.2011.2.6.7.4.4.2.1NodehwShdslCPECommon
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1TableumCommonInventoryTablenot-accessiblecurrentA table containing common inventory information.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1RowumCommonInventoryEntrynot-accessiblecurrentAn entry in umCommonInventoryTable.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.1ColumnumCommonInventoryModelread-onlycurrentThis variable indicates the model number.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.2ColumnumCommonInventorySwVerread-onlycurrentThis variable indicates the software version. format: a.bcd (a, b, c, d: 0 ~ 9)
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.3ColumnumCommonInventoryHwVerread-onlycurrentThis variable indicates the hardware version. format: a.bcd (a, b, c, d: 0 ~ 9)
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.4ColumnumCommonInventoryDevNameread-writecurrent<write-operation is not provided for remote-side> This variable indicates the device name.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2TableumCommonConfigTablenot-accessiblecurrentA table containing common config information.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2.1RowumCommonConfigEntrynot-accessiblecurrentAn entry in umCommonConfigTable.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2.1.1ColumnumCommonConfigDateread-writecurrentThis variable is used to define date information of the device. The format is MM/DD/YYYY. MM means month, DD is day, and YYYY stands for year. The range is fro…
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2.1.2ColumnumCommonConfigTimeread-writecurrentThis variable is used to define time information of the device. The format is HH:MM:SS. HH means hour, MM is to indicate minute and SS is for second.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3TableumCommonActionTablenot-accessiblecurrentA table containing actions to CPE.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3.1RowumCommonActionEntrynot-accessiblecurrentAn entry in umCommonActionTable.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3.1.1ColumnumCommonActionDbSaveread-writecurrentThis variable is to initiate the VCDB command. 1: save
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3.1.2ColumnumCommonActionWarmStartread-writecurrentThis value is to restart the device. TRUE (1): warm start
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4TableumCommonSnmpConfigTablenot-accessibledeprecatedA table containing SNMP configuration information.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1RowumCommonSnmpConfigEntrynot-accessibledeprecatedAn entry in umCommonSnmpConfigTable.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.1ColumnumCommonSnmpConfigIpAddressread-onlydeprecatedThis variable is to indicate IP address of the device.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.2ColumnumCommonSnmpConfigIpSubnetMaskread-onlydeprecatedThis variable is to define the subnet mask of the IP address of the device.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.3ColumnumCommonSnmpConfigIpGatewayIpread-onlydeprecatedThis variable is to define the gateway IP address of the device.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.4ColumnumCommonSnmpConfigTrapIpAddress1read-onlydeprecatedThis variable is to define the IP address where the manager receives trap.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.5ColumnumCommonSnmpConfigTrapIpPortNum1read-onlydeprecatedThis variable is to define the UDP port number where the manager receives trap. The possible values are: 162 (default) 62000 62001 62002
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.6ColumnumCommonSnmpConfigTrapIpAddress2read-onlydeprecatedThis variable is to define the IP address where the manager receives trap.
1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.7ColumnumCommonSnmpConfigTrapIpPortNum2read-onlydeprecatedThis variable is to define the UDP port number where the manager receives trap. The possible values are: 162 (default) 62000 62001 62002
1.3.6.1.4.1.2011.2.6.7.4.4.2.2NodehwShdslCPESdsl
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1TableumSdslConfigTablenot-accessiblecurrentA table containing Sdsl configuration information.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1RowumSdslConfigEntrynot-accessiblecurrentAn entry in umSdslConfigTable.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.1ColumnumSdslConfigNETyperead-onlydeprecatedThis variable is to set this STU-C or STU-R configuration. (0): STU-C (LT mode) (1): STU-R (NT mode)
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.2ColumnumSdslConfigRateAdaptiveread-writecurrentThis variable is to enable/disable the rate adaptive configuration. (0): Fixed (1): Adaptive
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.3ColumnumSdslConfigDataRateread-onlycurrentThis variable is to set data rate (N*64k) of Sdsl. If Rate Adaptive is TRUE, the value is invalid till Rate Adaptive is FALSE.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.4ColumnumSdslResetPerformanceread-writecurrentThis value is to reset performance register. 1: reset all current performance data 2: reset current ES 3: reset current SES 4: reset current UAS 5: reset all h…
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.5ColumnumSdslTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the current error-measurement period.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.6ColumnumSdslValidIntervalsread-onlycurrentThe number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in…
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2TableumSdslThresholdTablenot-accessiblecurrentA table containing MSDSL configuration information.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1RowumSdslThresholdEntrynot-accessiblecurrentAn entry in umSdslThresholdTable.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.1ColumnumSdslThreshold15mESread-writecurrentThis variable defines the 15-minute threshold of ES.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.2ColumnumSdslThreshold15mSESread-writecurrentThis variable defines the 15-minute threshold of SES.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.3ColumnumSdslThreshold15mUASread-writecurrentThis variable defines the 15-minute threshold of UAS.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.4ColumnumSdslThreshold24hESread-writecurrentThis variable defines the 24-hour threshold of ES.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.5ColumnumSdslThreshold24hSESread-writecurrentThis variable defines the 24-hour threshold of SES.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.6ColumnumSdslThreshold24hUASread-writecurrentThis variable defines the 24-hour threshold of UAS.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.7ColumnumSdslThresholdSNRMarginread-writecurrentThis variable indicates the SNR margin threshold of the Sdsl line. 1~15: valid value
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.8ColumnumSdslThresholdLoopAttenuationread-writecurrentThis variable indicates the Loop Attenuation threshold of the Sdsl line. 1~127:
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3TableumSdslPmCurrentTablenot-accessiblecurrentThe Sdsl PM Current table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1RowumSdslPmCurrentEntrynot-accessiblecurrentAn entry in the Sdsl Pm Current table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1.1ColumnumSdslPmCurrentESread-onlycurrentThe number of Errored Seconds encountered by an Sdsl during the current interval.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1.2ColumnumSdslPmCurrentSESread-onlycurrentThe number of Severely Errored Seconds encountered by an Sdsl during the current interval.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1.3ColumnumSdslPmCurrentUASread-onlycurrentThe number of Unavailable Seconds encountered by an Sdsl during the current interval.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4TableumSdslPmIntervalTablenot-accessiblecurrentThe Sdsl Interval table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1RowumSdslPmIntervalEntrynot-accessiblecurrentAn entry in the Sdsl Interval table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.1ColumnumSdslPmIntervalIndexnot-accessiblecurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.2ColumnumSdslPmIntervalESread-onlycurrentThe number of Errored Seconds encountered by an Sdsl in one interval.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.3ColumnumSdslPmIntervalSESread-onlycurrentThe number of Severely Errored Seconds encountered by an Sdsl in one interval.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.4ColumnumSdslPmIntervalUASread-onlycurrentThe number of Unavailable Seconds encountered by an Sdsl in one interval.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5TableumSdslPmCurrentDayTablenot-accessiblecurrentThe Sdsl PM Current Day table. (0:00AM ~ the last completed quarter)
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1RowumSdslPmCurrentDayEntrynot-accessiblecurrentAn entry in the Sdsl Pm Current Day table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1.1ColumnumSdslPmCurrentDayESread-onlycurrentThe number of Errored Seconds encountered by an Sdsl during the Current Day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1.2ColumnumSdslPmCurrentDaySESread-onlycurrentThe number of Severely Errored Seconds encountered by an Sdsl during the Current Day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1.3ColumnumSdslPmCurrentDayUASread-onlycurrentThe number of Unavailable Seconds encountered by an Sdsl during the Current Day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6TableumSdslPmDayTablenot-accessiblecurrentThe SDSL Pm Day table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1RowumSdslPmDayEntrynot-accessiblecurrentAn entry in the Sdsl Pm Day table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.1ColumnumSdslPmDayIndexnot-accessiblecurrentA number between 1 and 7, where 1 is the most recently completed day and 7 is the least recently completed day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.2ColumnumSdslPmDayESread-onlycurrentThe number of Errored Seconds encountered by an Sdsl in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.3ColumnumSdslPmDaySESread-onlycurrentThe number of Severely Errored Seconds encountered by an Sdsl in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.4ColumnumSdslPmDayUASread-onlycurrentThe number of Unavailable Seconds encountered by an Sdsl in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7TableumSdslTestTablenot-accessiblecurrentA table containing SHDSL testing function.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1RowumSdslTestEntrynot-accessiblecurrentAn entry in umSdslTestTable.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.1ColumnumSdslTestLoopbackread-writecurrentThis value is to set loopback. 0: Release 2: Loopback toward Network
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.2ColumnumSdslTestPatternread-writecurrentThis variable is used to set test pattern. 1: 511 2: 2047 3: PRBS Support Eoc Version 1.02 (23/04/2002)
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.3ColumnumSdslTestPeriodread-writecurrentThis variable is used to get/set test period in second. A value of 0 means non-stop testing.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.4ColumnumSdslTestStartread-writecurrentThis value is to start or stop testing(only local). TRUE (1): Start FALSE (2): Stop
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.5ColumnumSdslTestInsertOneBitErrorread-writecurrentThis variable is used to initiate pause test pattern. This is used in error insertion application. (1) Insert error rate(rate= 10E-1)
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.6ColumnumSdslTestElapsedTimeread-onlycurrentThis variable is to indicate elapsed time of testing in second.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.7ColumnumSdslTestErrCountread-onlycurrentThis variable is to indicate error count of testing.
1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.8ColumnumSdslTestErrRateread-onlycurrentThis variable is to indicate error rate of testing, which is 'a.bcx10E(-d)', a, b, c: 0..9, d: 1..9.
1.3.6.1.4.1.2011.2.6.7.4.4.2.3NodehwShdslCPEV35
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1TableumSdslV35ConfigTablenot-accessiblecurrentThe config table contains Ne config items.
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1RowumSdslV35ConfigEntrynot-accessiblecurrentAn entry in the config table
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1.1ColumnumSdslV35ConfigCurrentDataRateread-onlycurrentThis variable is to get current data rate (N*64k) of Sdsl V35.
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1.2ColumnumSdslV35ConfigCurrentTimingSrcread-onlydeprecatedThis variable is to get the current timing source of the system. 0: internal 1: from loop (SDSL) 2: from DTE (V.35)
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1.3ColumnumSdslV35ConfigTimingSrcread-writedeprecatedThis variable is to get/set the setted timing source of the system. 0: internal 1: from loop (SDSL) 2: from DTE (V.35)
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2TableumSdslV35DTETablenot-accessiblecurrentThe alarm table contains DTE.
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1RowumSdslV35DTEEntrynot-accessiblecurrentAn entry in the alarm table
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1.1ColumnumSdslV35DTEStatusread-onlycurrentThe variable represents which port reports the DTE Status. (bit) 0 : RTS 1 : CTS 2 : DCD 3 : DSR
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1.2ColumnumSdslV35DTERTSread-writecurrentThe variable represents which port reports the RTS Config Status. 0 : RTS from DTE 1 : RTS Permanent On
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1.3ColumnumSdslV35TailFuncread-writecurrentThe variable represents tail function switch. 0 : Tail off 1 : Tail on
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.3TableumSdslV35LoopbackTablenot-accessiblecurrentThe V35 Loopback Table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.3.1RowumSdslV35LoopbackEntrynot-accessiblecurrentAn entry in the Sdsl Testing table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.3.1.1ColumnumSdslV35Loopbackread-writecurrentThis value is to set loopback. 0: Release 1: Toward DTE Loop 2: Toward Network Loop 3: Initial in-band Loop (V.54)
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4TableumSdslV35AlarmTablenot-accessiblecurrentThe alarm table contains alarm event history.
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4.1RowumSdslV35AlarmEntrynot-accessiblecurrentAn entry in the alarm table
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4.1.1ColumnumSdslV35ClearAlarmHistoryread-writecurrentThe variable initiate the clear alarm history action(Set 1).
1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4.1.2ColumnumSdslV35AlarmStatusread-onlycurrentThe variable initiate the current alarm status. (bit) bit0: Loss of SDSL synchronization word (LOSW) bit1: (SDSL) ES exceed day threshold bit2: (SDSL) ES excee…
1.3.6.1.4.1.2011.2.6.7.4.4.2.4NodehwCPET1E1
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1TableumLiuTablenot-accessiblecurrentThe LIU table. The LIU attributes regarding configuration and performance are defined in RFC1406.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1RowumLiuEntrynot-accessiblecurrentAn entry in the LIU table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.1ColumnumLiuE1Transparentread-writecurrentThis value gets/sets the E1 Transparency. Disable(0), Enable (1)
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.2ColumnumLiuLineDriveread-writecurrentThis variable is to define the value of line drive. 75_Ohm(0), 120_Ohm(1)
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.3ColumnumLiuIdleCodewordread-writecurrentThis variable represents the value of idle code word. But the write-operation is preserved for future use. If you take write-operation, <Generic error> will be…
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.4ColumnumLiuE1SlotMapread-writecurrentThis table defines the corresponding customer equipment interface for each time slot of network interface. Each bit represents one time slot. '1' stands for oc…
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.5ColumnumLiuResetPerformanceread-writecurrentThis value is to reset performance register for this port. 1: reset all current performance data 2: reset current LCV 3: reset current PCV 4: reset current ES …
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2TableumLiuTestTablenot-accessiblecurrentThe LIU table. The LIU attributes regarding configuration and performance are defined in RFC1406.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1RowumLiuTestEntrynot-accessiblecurrentAn entry in the LIU Test table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.1ColumnumLiuLoopbackConfigread-writecurrentThis value is to set LIU loopback. 0: release 1: payload loopback 2: line loopback 3: local loopback
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.2ColumnumLiuLoopbackStatusread-onlycurrentThis value is to indicate the LIU loopback status. 0: released 1: payload loopback 2: line loopback 3: local loopback
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.3ColumnumLiuTestPatternread-writecurrentThis variable is used to set test pattern. 1: 2E15-1_PRBS 3: 2047
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.4ColumnumLiuTestPeriodread-writecurrentThis variable is used to set test period in second. A value of 0 means non-stop testing.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.5ColumnumLiuTestStartread-writecurrentThis value is to start or stop testing. 1: Start 2: Stop
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.6ColumnumLiuInsertedErrorRateread-writecurrentThis value is used to set inserted error rate. Inserted error rate = 1*10E(-n), where n is the set value. Set 0 to stop insertting errors.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.7ColumnumLiuElapsedTimeread-onlycurrentThis variable is to indicate elapsed time of testing.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.8ColumnumLiuTestErrCountread-onlycurrentThis variable is to indicate error count of testing.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.9ColumnumLiuTestErrRateread-onlycurrentThis variable is to indicate error rate of testing, which is 'a.bcx10E(-d)', a, b, c: 0..9, d: 1..9.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3TableumLiuThresholdTablenot-accessiblecurrentThe Performance threshold table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1RowumLiuThresholdEntrynot-accessiblecurrentAn entry in Performance threshold table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.1ColumnumLiuThreshold15mLCVread-writecurrentThis variable defines the threshold of LCV. This variable is valid for near end UM.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.2ColumnumLiuThreshold15mPCVread-writecurrentThis variable defines the threshold of PCV.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.3ColumnumLiuThreshold15mESread-writecurrentThis variable defines the threshold of ES.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.4ColumnumLiuThreshold15mSESread-writecurrentThis variable defines the threshold of SES.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.5ColumnumLiuThreshold15mSEFSread-writecurrentThis variable defines the threshold of SEFS.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.6ColumnumLiuThreshold15mUASread-writecurrentThis variable defines the threshold of UAS.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.7ColumnumLiuThreshold15mCSSread-writecurrentThis variable defines the threshold of CSS.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.8ColumnumLiuThreshold15mDMread-writecurrentThis variable defines the threshold of DM.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.9ColumnumLiuThreshold24hLCVread-writecurrentThis variable defines the threshold of LCV. This variable is valid for near end UM.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.10ColumnumLiuThreshold24hPCVread-writecurrentThis variable defines the threshold of PCV.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.11ColumnumLiuThreshold24hESread-writecurrentThis variable defines the threshold of ES.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.12ColumnumLiuThreshold24hSESread-writecurrentThis variable defines the threshold of SES.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.13ColumnumLiuThreshold24hSEFSread-writecurrentThis variable defines the threshold of SEFS.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.14ColumnumLiuThreshold24hUASread-writecurrentThis variable defines the threshold of UAS.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.15ColumnumLiuThreshold24hCSSread-writecurrentThis variable defines the threshold of CSS.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.16ColumnumLiuThreshold24hDMread-writecurrentThis variable defines the threshold of DM.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4NodeumLiuPmData
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1TableumLiuPmCurrent15mTablenot-accessiblecurrentThe Liu PM Current table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1RowumLiuPmCurrent15mEntrynot-accessiblecurrentAn entry in the Liu Pm Current 15 minutes table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.1ColumnumLiuPmCurrent15mLCVread-onlycurrentThe number of Line Code Violations encountered by an LIU interface in the current quarter.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.2ColumnumLiuPmCurrent15mPCVread-onlycurrentThe number of Path Coding Violations encountered by an LIU interface in the current quarter.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.3ColumnumLiuPmCurrent15mESread-onlycurrentThe number of Errored Seconds encountered by an LIU interface in the current quarter.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.4ColumnumLiuPmCurrent15mSESread-onlycurrentThe number of Severely Errored Seconds encountered by an LIU interface in the current quarter.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.5ColumnumLiuPmCurrent15mSEFSread-onlycurrentThe number of Severely Errored Framing Seconds encountered by an LIU interface in the current quarter.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.6ColumnumLiuPmCurrent15mUASread-onlycurrentThe number of Unavailable Seconds encountered by an LIU interface in the current quarter.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.7ColumnumLiuPmCurrent15mCSSread-onlycurrentThe number of Controlled Slip Seconds encountered by an LIU interface in the current quarter.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.8ColumnumLiuPmCurrent15mDMread-onlycurrentThe number of Degraded Minutes encountered by an LIU interface in the current quarter.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.9ColumnumLiuPmCurrent15mCSread-onlycurrentThe number of Controlled Slip encountered by an LIU interface in the current quarter.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.10ColumnumLiuPmCurrent15mFBEread-onlycurrentThe number of Loss Of Frame encountered by an LIU interface in current quarter.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2TableumLiuPm15mTablenot-accessiblecurrentThe Liu PM 15 minutes Interval table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1RowumLiuPm15mEntrynot-accessiblecurrentAn entry in the Liu Pm Interval table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.1ColumnumLiuPm15mIndexnot-accessiblecurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.2ColumnumLiuPm15mLCVread-onlycurrentThe number of Line Code Violations encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.3ColumnumLiuPm15mPCVread-onlycurrentThe number of Path Coding Violations encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.4ColumnumLiuPm15mESread-onlycurrentThe number of Errored Seconds encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.5ColumnumLiuPm15mSESread-onlycurrentThe number of Severely Errored Seconds encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.6ColumnumLiuPm15mSEFSread-onlycurrentThe number of Severely Errored Framing Seconds encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.7ColumnumLiuPm15mUASread-onlycurrentThe number of Unavailable Seconds encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.8ColumnumLiuPm15mCSSread-onlycurrentThe number of Controlled Slip Seconds encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.9ColumnumLiuPm15mDMread-onlycurrentThe number of Degraded Minutes encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.10ColumnumLiuPm15mCSread-onlycurrentThe number of Controlled Slip encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.11ColumnumLiuPm15mFBEread-onlycurrentThe number of Loss Of Frame encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3TableumLiuPmCurrentDayTablenot-accessiblecurrentThe Liu PM Current Day table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1RowumLiuPmCurrentDayEntrynot-accessiblecurrentAn entry in the Liu Pm Current Day table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.1ColumnumLiuPmCurrentDayLCVread-onlycurrentThe number of Line Code Violations encountered by an LIU interface in current day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.2ColumnumLiuPmCurrentDayPCVread-onlycurrentThe number of Path Coding Violations encountered by an LIU interface in current day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.3ColumnumLiuPmCurrentDayESread-onlycurrentThe number of Errored Seconds encountered by an LIU interface in current day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.4ColumnumLiuPmCurrentDaySESread-onlycurrentThe number of Severely Errored Seconds encountered by an LIU interface in current day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.5ColumnumLiuPmCurrentDaySEFSread-onlycurrentThe number of Severely Errored Framing Seconds encountered by an LIU interface in current day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.6ColumnumLiuPmCurrentDayUASread-onlycurrentThe number of Unavailable Seconds encountered by an LIU interface in current day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.7ColumnumLiuPmCurrentDayCSSread-onlycurrentThe number of Controlled Slip Seconds encountered by an LIU interface in current day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.8ColumnumLiuPmCurrentDayDMread-onlycurrentThe number of Degraded Minutes encountered by an LIU interface in current day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.9ColumnumLiuPmCurrentDayCSread-onlycurrentThe number of Controlled Slip encountered by an LIU interface in current day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.10ColumnumLiuPmCurrentDayFBEread-onlycurrentThe number of Loss Of Frame encountered by an LIU interface in current day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4TableumLiuPmDayTablenot-accessiblecurrentThe Liu PM Day table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1RowumLiuPmDayEntrynot-accessiblecurrentAn entry in the Liu Pm Day table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.1ColumnumLiuPmDayIndexnot-accessiblecurrentA number between 1 and 7, where 1 is PM data of the most recently completed day and 7 is PM data of the least completed recently day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.2ColumnumLiuPmDayLCVread-onlycurrentThe number of Line Code Violations encountered by an LIU interface in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.3ColumnumLiuPmDayPCVread-onlycurrentThe number of Path Coding Violations encountered by an LIU interface in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.4ColumnumLiuPmDayESread-onlycurrentThe number of Errored Seconds encountered by an LIU interface in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.5ColumnumLiuPmDaySESread-onlycurrentThe number of Severely Errored Seconds encountered by an LIU interface in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.6ColumnumLiuPmDaySEFSread-onlycurrentThe number of Severely Errored Framing Seconds encountered by an LIU interface in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.7ColumnumLiuPmDayUASread-onlycurrentThe number of Unavailable Seconds encountered by an LIU interface in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.8ColumnumLiuPmDayCSSread-onlycurrentThe number of Controlled Slip Seconds encountered by an LIU interface in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.9ColumnumLiuPmDayDMread-onlycurrentThe number of Degraded Minutes encountered by an LIU interface in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.10ColumnumLiuPmDayCSread-onlycurrentThe number of Controlled Slip encountered by an LIU interface in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.11ColumnumLiuPmDayFBEread-onlycurrentThe number of Loss Of Frame by an LIU interface in one day.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5TableumSdslE1T1AlarmTablenot-accessiblecurrentThe SDSL E1T1 alarm table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1RowumSdslE1T1AlarmEntrynot-accessiblecurrentAn entry in the SDSL alarm table.
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.1ColumnumSdslE1T1ClearAlarmHistoryread-writecurrentThe variable initiate the clear alarm history action(Set 1).
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.2ColumnumSdslE1T1LocalAlarmStatusread-onlycurrentThe variable initiate the local current alarm status. (bit) 0: (E1T1) E1 LOS Failure (Loss of signal) 1: (E1T1) Loss of Frame Alignment 2: (E1T1) Loss of E1T1 …
1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.3ColumnumSdslE1T1SdslAlarmStatusread-onlycurrentThe variable initiate the E1T1 SHDSL current alarm status. (bit) 0: (SDSL) LOSW Failure (Loss of SDSL synchronization word) 1: (SDSL) ES exceed day threshold 2…