Hub-rptr-prvt-sec
74 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter internet OBJECT-TYPE |
| SNMPv2-TC | PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.22 | Nodefibronics | |||
| 1.3.6.1.4.1.22.101 | Nodemibs | |||
| 1.3.6.1.4.1.22.101.8 | Nodemibseth-rptrs | |||
| 1.3.6.1.4.1.22.101.8.5 | NoderptrSecurityInfo | |||
| 1.3.6.1.4.1.22.101.8.5.1 | TableprptrSecurityGroupTable | not-accessible | mandatory | Table of descriptive and status information about the global security as represented in the non-volatile memory. |
| 1.3.6.1.4.1.22.101.8.5.1.1 | RowprptrSecurityGroupEntry | not-accessible | mandatory | An entry in the table, containing information about the security of a single group. |
| 1.3.6.1.4.1.22.101.8.5.1.1.1 | ColumnprptrSecurityGroupIndex | read-only | mandatory | This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said sys… |
| 1.3.6.1.4.1.22.101.8.5.1.1.2 | ColumnprptrSecurityGroupAdminState | read-write | mandatory | When this object is set to enable(2) the repeater will allow the implementation of the security features according to port specific objects. When this object i… |
| 1.3.6.1.4.1.22.101.8.5.1.1.3 | ColumnprptrSecurityGroupAutoLearnMode | read-write | mandatory | When this variable is set to enable(2) the repeater will enable auto learn mode for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card. When th… |
| 1.3.6.1.4.1.22.101.8.5.1.1.4 | ColumnprptrSecurityGroupBroadcastMode | read-write | mandatory | Setting this variable to accept(2) will change the value of the object prptrSecurityPortBroadcastMode to accept(2) for all 10BASET ports in LC342S card, and fo… |
| 1.3.6.1.4.1.22.101.8.5.1.1.5 | ColumnprptrSecurityGroupMulticastMode | read-write | mandatory | Setting this variable to accept(2) will change the value of the object prptrSecurityPortMulticastMode to accept(2) for all 10BASET ports in LC342S card, and fo… |
| 1.3.6.1.4.1.22.101.8.5.1.1.6 | ColumnprptrSecurityGroupDisPortMode | read-write | mandatory | When this variable is set to disable(3) the repeater will NOT disable the port on a source address mismatch. When this variable is set to enable(2) the repeate… |
| 1.3.6.1.4.1.22.101.8.5.1.1.7 | ColumnprptrSecurityGroupRandomMode | read-write | mandatory | When this variable is set to enable(2) the repeater will generate the random pattern on a source address mismatch. When this variable is set to disable(3) The … |
| 1.3.6.1.4.1.22.101.8.5.1.1.8 | ColumnprptrSecurityGroupDAMismatch | read-write | mandatory | Setting this variable to enable(2) will change the value of the object prptrSecurityPortDAMismatch to enable(2) for all 10BASET ports in LC342S card, and for p… |
| 1.3.6.1.4.1.22.101.8.5.1.1.9 | ColumnprptrSecurityGroupSAMismatch | read-write | mandatory | Setting this variable to enable(2) will change the value of the object prptrSecurityPortSAMismatch to enable(2) for all 10BASET ports in LC342S card, and for p… |
| 1.3.6.1.4.1.22.101.8.5.1.1.10 | ColumnprptrSecurityAutoRplaceMode | read-write | mandatory | Setting this variable to enable(2) will change the value of the object prptrSecurityPortAutoRplceMode to enable(2) for all 10BASET ports in LC342S card, and fo… |
| 1.3.6.1.4.1.22.101.8.5.1.1.11 | ColumnprptrSecurityAllPortsAdmin | read-write | mandatory | Setting this variable to enable(2) will change the value of the object prptrSecurityPortAdminState to enable(2) for all 10BASET ports in LC342S card, and for p… |
| 1.3.6.1.4.1.22.101.8.5.2 | TablerptrSecurityGroupTable | not-accessible | mandatory | Table of the operational status information of the global security as represented in the security hardware. |
| 1.3.6.1.4.1.22.101.8.5.2.1 | RowrptrSecurityGroupEntry | not-accessible | mandatory | An entry in the table, containing information about the global security status of a single group. |
| 1.3.6.1.4.1.22.101.8.5.2.1.1 | ColumnrptrSecurityGroupIndex | read-only | mandatory | This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said sys… |
| 1.3.6.1.4.1.22.101.8.5.2.1.2 | ColumnrptrSecurityGroupOperState | read-only | mandatory | This object reflects the operational state of the security feature within the repeater. the operational state is set by specifying a value for prptrSecurityGro… |
| 1.3.6.1.4.1.22.101.8.5.2.1.3 | ColumnrptrSecurityGroupAutoLearnMode | read-only | mandatory | When variable value is enable(2) the repeater enables auto learn mode for all 10BASET ports on LC342 cards, and for ports 1-8 in LC348S card. When value is dis… |
| 1.3.6.1.4.1.22.101.8.5.2.1.4 | ColumnrptrSecurityGroupDisPortMode | read-only | mandatory | When variable value is disable(3) the repeater does NOT disable the port on a source address mismatch. When variable value is enable(3) the repeater will disab… |
| 1.3.6.1.4.1.22.101.8.5.2.1.5 | ColumnrptrSecurityGroupRandomMode | read-only | mandatory | When variable value is enable(2) the repeater generates the random pattern on a source address mismatch. When value is disable(3) the repeater does NOT generat… |
| 1.3.6.1.4.1.22.101.8.6 | NoderptrSecurityPortInfo | |||
| 1.3.6.1.4.1.22.101.8.6.1 | TableprptrSecurityPortTable | not-accessible | mandatory | Table of descriptive and status information about the security of ports as represented in the non-volatile memory. |
| 1.3.6.1.4.1.22.101.8.6.1.1 | RowprptrSecurityPortEntry | not-accessible | mandatory | An entry in the table, containing information about the security of a single port. |
| 1.3.6.1.4.1.22.101.8.6.1.1.1 | ColumnprptrSecurityPortGroupIndex | read-only | mandatory | This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said sys… |
| 1.3.6.1.4.1.22.101.8.6.1.1.2 | ColumnprptrSecurityPortIndex | read-only | mandatory | This object identifies the port within the repeater for which this entry contains information. |
| 1.3.6.1.4.1.22.101.8.6.1.1.3 | ColumnprptrSecurityPortAdminState | read-write | mandatory | When this object is set to enable(2) the port allows the employment of security according to the specific objects. When this object is set to disable(3) the po… |
| 1.3.6.1.4.1.22.101.8.6.1.1.4 | ColumnprptrSecurityPortAutoLearnMode | read-write | mandatory | When this variable is set to enable(2) the port functions in auto learn mode. When this variable is set to disable(3) the port does NOT function in auto learn … |
| 1.3.6.1.4.1.22.101.8.6.1.1.5 | ColumnprptrSecurityPortBroadcastMode | read-write | mandatory | When this variable is set to accept(2) the port accepts broadcast frames and repeats them to all ports. When the following objects have the values: prptrSecuri… |
| 1.3.6.1.4.1.22.101.8.6.1.1.6 | ColumnprptrSecurityPortMulticastMode | read-write | mandatory | When this variable is set to accept(2) the port accepts multicast frames and repeats them to all ports. When the following objects have the values: prptrSecuri… |
| 1.3.6.1.4.1.22.101.8.6.1.1.7 | ColumnprptrSecurityPortSAMismatch | read-write | mandatory | When this variable is set to enable(2) the port employs source address comparison to implement security, meaning that whenever a packet is received on the port… |
| 1.3.6.1.4.1.22.101.8.6.1.1.8 | ColumnprptrSecurityPortDAMismatch | read-write | mandatory | When this variable is set to enable(2) the port employs destination address comparison to implement security, meaning that whenever a packet needs to be send t… |
| 1.3.6.1.4.1.22.101.8.6.1.1.9 | ColumnprptrSecurityPortMAC1state | read-write | mandatory | This object defines whether the first MAC entry for this port is valid or not. whenever this entry is set to valid(2) the prptrSecurityPortMAC1address cannot b… |
| 1.3.6.1.4.1.22.101.8.6.1.1.10 | ColumnprptrSecurityPortMAC1Address | read-write | mandatory | This object holds the Ethernet physical address associated with MAC1 of this port. |
| 1.3.6.1.4.1.22.101.8.6.1.1.11 | ColumnprptrSecurityPortMAC2state | read-write | mandatory | This object defines whether the second MAC entry for this port is valid or not. whenever this entry is set to valid(2) the prptrSecurityPortMAC2address cannot … |
| 1.3.6.1.4.1.22.101.8.6.1.1.12 | ColumnprptrSecurityPortMAC2Address | read-write | mandatory | This object holds the Ethernet physical address associated with MAC2 of this port. |
| 1.3.6.1.4.1.22.101.8.6.1.1.13 | ColumnprptrSecurityPortAutoRplaceMode | read-write | mandatory | Whenever this object is set to enable(2) the cam address entry for the port is automatically replaced by addresses received at that port which cause address mi… |
| 1.3.6.1.4.1.22.101.8.6.2 | TablerptrSecurityPortTable | not-accessible | mandatory | Table of the operational information of the ports' security status as represented in the security hardware. |
| 1.3.6.1.4.1.22.101.8.6.2.1 | RowrptrSecurityPortEntry | not-accessible | mandatory | An entry in the table, containing information about the security of a single port. |
| 1.3.6.1.4.1.22.101.8.6.2.1.1 | ColumnrptrSecurityPortGroupIndex | read-only | mandatory | This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said sys… |
| 1.3.6.1.4.1.22.101.8.6.2.1.2 | ColumnrptrSecurityPortIndex | read-only | mandatory | This object identifies the port within the repeater for which this entry contains information. |
| 1.3.6.1.4.1.22.101.8.6.2.1.3 | ColumnrptrSecurityPortOperState | read-only | mandatory | This object reflects the operational state of the security feature of the port. The value other(1) is returned whenever the operational state is unknown. |
| 1.3.6.1.4.1.22.101.8.6.2.1.4 | ColumnrptrSecurityPortAutoLearnMode | read-only | mandatory | When this variable value is enable(2) the port functions in auto learn mode. When disable(3) the port does not function in auto learn mode. The value other(1) … |
| 1.3.6.1.4.1.22.101.8.6.2.1.5 | ColumnrptrSecurityPortBroadcastMode | read-only | mandatory | When variable value is accept(2) the port accepts broadcast frames and repeats them to all ports. When value is reject(3), and the following objects have the v… |
| 1.3.6.1.4.1.22.101.8.6.2.1.6 | ColumnrptrSecurityPortMulticastMode | read-only | mandatory | When variable value is accept(2) the port accepts multicast frames and repeats them to all ports. When value is reject(3) and the value of the object prptrSecu… |
| 1.3.6.1.4.1.22.101.8.6.2.1.7 | ColumnrptrSecurityPortSAMismatch | read-only | mandatory | When variable value is enable(2) the port employs source address comparison to implement security, meaning that whenever a packet is received on the port, the … |
| 1.3.6.1.4.1.22.101.8.6.2.1.8 | ColumnrptrSecurityPortDAMismatch | read-only | mandatory | When variable value is enable(2) the port employs destination address comparison to implement security, meaning that whenever a packet needs to be send to the … |
| 1.3.6.1.4.1.22.101.8.6.2.1.9 | ColumnrptrSecurityPortSAMismatches | read-only | mandatory | This object counts the number of times that the source address mismatch event occurred for that port. |
| 1.3.6.1.4.1.22.101.8.6.2.1.10 | ColumnrptrSecurityPortLastSAMismatch | read-only | mandatory | This object holds the last source address received on the port which caused a source address mismatch. |
| 1.3.6.1.4.1.22.101.8.6.2.1.11 | ColumnrptrSecurityPortMAC1state | read-only | mandatory | This object defines whether the first MAC entry for this port is valid or not. The value other(1) should be returned whenever the value of this object is unkno… |
| 1.3.6.1.4.1.22.101.8.6.2.1.12 | ColumnrptrSecurityPortMAC1Address | read-only | mandatory | This object holds the Ethernet physical address associated with MAC1 of this port. |
| 1.3.6.1.4.1.22.101.8.6.2.1.13 | ColumnrptrSecurityPortMAC2state | read-only | mandatory | This object defines whether the second MAC entry for this port is valid or not. The value other(1) should be returned whenever the value of this object is unkn… |
| 1.3.6.1.4.1.22.101.8.6.2.1.14 | ColumnrptrSecurityPortMAC2Address | read-only | mandatory | This object holds the Ethernet physical address associated with MAC2 of this port. |
| 1.3.6.1.4.1.22.101.8.7 | NoderptrSecurityMACInfo | |||
| 1.3.6.1.4.1.22.101.8.7.1 | TableprptrSecurityMACTable | not-accessible | mandatory | Table of descriptive and status information about the security shared MAC table as stored in the non-volatile memory. Maximum number of entries in this table i… |
| 1.3.6.1.4.1.22.101.8.7.1.1 | RowprptrSecurityMACEntry | not-accessible | mandatory | An entry in the table, containing information about a single MAC entry. |
| 1.3.6.1.4.1.22.101.8.7.1.1.1 | ColumnprptrSecurityMACGroupIndex | read-only | mandatory | This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said sys… |
| 1.3.6.1.4.1.22.101.8.7.1.1.2 | ColumnprptrSecurityMACEntryIndex | read-only | mandatory | This object identifies the entry containing the information. |
| 1.3.6.1.4.1.22.101.8.7.1.1.3 | ColumnprptrSecurityMACPhysicalAddress | read-write | mandatory | This object holds the Ethernet physical address associated with this MAC entry. |
| 1.3.6.1.4.1.22.101.8.7.1.1.4 | ColumnprptrSecurityMACState | read-write | mandatory | This object defines whether this MAC entry is valid or not. whenever this entry is set to valid(2) other objects for this entry cannot be changed. The value ot… |
| 1.3.6.1.4.1.22.101.8.7.1.1.5 | ColumnprptrSecurityMACPortMap | read-write | mandatory | This object identifies the ports with which this MAC entry is associated. This object is a bit map where setting a given bit indicates that this MAC entry is a… |
| 1.3.6.1.4.1.22.101.8.7.2 | TablerptrSecurityMACTable | not-accessible | mandatory | Table of descriptive and status information about the security shared CAM table as presented in the security hardware. This table should reflect the values of … |
| 1.3.6.1.4.1.22.101.8.7.2.1 | RowrptrSecurityMACEntry | not-accessible | mandatory | An entry in the table, containing information about a single MAC entry. |
| 1.3.6.1.4.1.22.101.8.7.2.1.1 | ColumnrptrSecurityMACGroupIndex | read-only | mandatory | This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said sys… |
| 1.3.6.1.4.1.22.101.8.7.2.1.2 | ColumnrptrSecurityMACEntryIndex | read-only | mandatory | This object identifies the entry containing the information. |
| 1.3.6.1.4.1.22.101.8.7.2.1.3 | ColumnrptrSecurityMACPhysicalAddress | read-only | mandatory | This object holds the Ethernet physical address associated with this MAC entry. |
| 1.3.6.1.4.1.22.101.8.7.2.1.4 | ColumnrptrSecurityMACState | read-only | mandatory | This object defines whether this MAC entry is valid or not. The value other(1) should be returned whenever the value of this object is unknown. |
| 1.3.6.1.4.1.22.101.8.7.2.1.5 | ColumnrptrSecurityMACPortMap | read-only | mandatory | This object identifies the ports with which this MAC entry is associated. This object is a bit map where setting a given bit indicates that this MAC entry is a… |
| 1.3.6.1.4.1.22.101.8.15 | NoderptrSecuritySAMismatch | The rptrSecuritySAMismatch trap is sent to the network manager station whenever the repeater detects a source address mismatch on one of the ports for which se… |