MIB Viewer

IANA-MAU-TC-MIB

57 objects
This MIB module defines dot3MauType OBJECT-IDENTITIES and IANAifMauListBits and JackType Textual Conventions, specifying enumerated values of the ifMauTypeListBits and ifJackType objects respectively, defined in the MAU-MIB. A Standards Action (as defined in RFC 2434) is REQUIRED for the addition of the new MAU types, so that any prospective assignments are documented in an RFC. Any document that proposes such an addition is REQUIRED to note any special properties of the MAU types that it defines noted in RFC 3636 Section 3.4.1 for 10GBASE-W MAUs.
Imported Objects
SNMPv2-SMImib-2 MODULE-IDENTITY OBJECT-IDENTITY
SNMPv2-TCTEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.2.1.26.4Nodedot3MauType
1.3.6.1.2.1.26.4.1Identitydot3MauTypeAUIcurrentno internal MAU, view from AUI
1.3.6.1.2.1.26.4.2Identitydot3MauType10Base5currentthick coax MAU
1.3.6.1.2.1.26.4.3Identitydot3MauTypeFoirlcurrentFOIRL MAU
1.3.6.1.2.1.26.4.4Identitydot3MauType10Base2currentthin coax MAU
1.3.6.1.2.1.26.4.5Identitydot3MauType10BaseTcurrentUTP MAU. Note that it is strongly recommended that agents return either dot3MauType10BaseTHD or dot3MauType10BaseTFD if the duplex mode is known. However, mana…
1.3.6.1.2.1.26.4.6Identitydot3MauType10BaseFPcurrentpassive fiber MAU
1.3.6.1.2.1.26.4.7Identitydot3MauType10BaseFBcurrentsync fiber MAU
1.3.6.1.2.1.26.4.8Identitydot3MauType10BaseFLcurrentasync fiber MAU. Note that it is strongly recommended that agents return either dot3MauType10BaseFLHD or dot3MauType10BaseFLFD if the duplex mode is known. How…
1.3.6.1.2.1.26.4.9Identitydot3MauType10Broad36currentbroadband DTE MAU. Note that 10BROAD36 MAUs can be attached to interfaces but not to repeaters.
1.3.6.1.2.1.26.4.10Identitydot3MauType10BaseTHDcurrentUTP MAU, half duplex mode
1.3.6.1.2.1.26.4.11Identitydot3MauType10BaseTFDcurrentUTP MAU, full duplex mode
1.3.6.1.2.1.26.4.12Identitydot3MauType10BaseFLHDcurrentasync fiber MAU, half duplex mode
1.3.6.1.2.1.26.4.13Identitydot3MauType10BaseFLFDcurrentasync fiber MAU, full duplex mode
1.3.6.1.2.1.26.4.14Identitydot3MauType100BaseT4current4 pair category 3 UTP
1.3.6.1.2.1.26.4.15Identitydot3MauType100BaseTXHDcurrent2 pair category 5 UTP, half duplex mode
1.3.6.1.2.1.26.4.16Identitydot3MauType100BaseTXFDcurrent2 pair category 5 UTP, full duplex mode
1.3.6.1.2.1.26.4.17Identitydot3MauType100BaseFXHDcurrentX fiber over PMT, half duplex mode
1.3.6.1.2.1.26.4.18Identitydot3MauType100BaseFXFDcurrentX fiber over PMT, full duplex mode
1.3.6.1.2.1.26.4.19Identitydot3MauType100BaseT2HDcurrent2 pair category 3 UTP, half duplex mode
1.3.6.1.2.1.26.4.20Identitydot3MauType100BaseT2FDcurrent2 pair category 3 UTP, full duplex mode
1.3.6.1.2.1.26.4.21Identitydot3MauType1000BaseXHDcurrentPCS/PMA, unknown PMD, half duplex mode
1.3.6.1.2.1.26.4.22Identitydot3MauType1000BaseXFDcurrentPCS/PMA, unknown PMD, full duplex mode
1.3.6.1.2.1.26.4.23Identitydot3MauType1000BaseLXHDcurrentFiber over long-wavelength laser, half duplex mode
1.3.6.1.2.1.26.4.24Identitydot3MauType1000BaseLXFDcurrentFiber over long-wavelength laser, full duplex mode
1.3.6.1.2.1.26.4.25Identitydot3MauType1000BaseSXHDcurrentFiber over short-wavelength laser, half duplex mode
1.3.6.1.2.1.26.4.26Identitydot3MauType1000BaseSXFDcurrentFiber over short-wavelength laser, full duplex mode
1.3.6.1.2.1.26.4.27Identitydot3MauType1000BaseCXHDcurrentCopper over 150-Ohm balanced cable, half duplex mode
1.3.6.1.2.1.26.4.28Identitydot3MauType1000BaseCXFDcurrentCopper over 150-Ohm balanced cable, full duplex mode
1.3.6.1.2.1.26.4.29Identitydot3MauType1000BaseTHDcurrentFour-pair Category 5 UTP, half duplex mode
1.3.6.1.2.1.26.4.30Identitydot3MauType1000BaseTFDcurrentFour-pair Category 5 UTP, full duplex mode
1.3.6.1.2.1.26.4.31Identitydot3MauType10GigBaseXcurrentX PCS/PMA, unknown PMD.
1.3.6.1.2.1.26.4.32Identitydot3MauType10GigBaseLX4currentX fiber over WWDM optics
1.3.6.1.2.1.26.4.33Identitydot3MauType10GigBaseRcurrentR PCS/PMA, unknown PMD.
1.3.6.1.2.1.26.4.34Identitydot3MauType10GigBaseERcurrentR fiber over 1550 nm optics
1.3.6.1.2.1.26.4.35Identitydot3MauType10GigBaseLRcurrentR fiber over 1310 nm optics
1.3.6.1.2.1.26.4.36Identitydot3MauType10GigBaseSRcurrentR fiber over 850 nm optics
1.3.6.1.2.1.26.4.37Identitydot3MauType10GigBaseWcurrentW PCS/PMA, unknown PMD.
1.3.6.1.2.1.26.4.38Identitydot3MauType10GigBaseEWcurrentW fiber over 1550 nm optics
1.3.6.1.2.1.26.4.39Identitydot3MauType10GigBaseLWcurrentW fiber over 1310 nm optics
1.3.6.1.2.1.26.4.40Identitydot3MauType10GigBaseSWcurrentW fiber over 850 nm optics
1.3.6.1.2.1.26.4.41Identitydot3MauType10GigBaseCX4currentX copper over 8 pair 100-Ohm balanced cable
1.3.6.1.2.1.26.4.42Identitydot3MauType2BaseTLcurrentVoice grade UTP copper, up to 2700m
1.3.6.1.2.1.26.4.43Identitydot3MauType10PassTScurrentVoice grade UTP copper, up to 750m
1.3.6.1.2.1.26.4.44Identitydot3MauType100BaseBX10DcurrentOne single-mode fiber OLT
1.3.6.1.2.1.26.4.45Identitydot3MauType100BaseBX10UcurrentOne single-mode fiber ONU
1.3.6.1.2.1.26.4.46Identitydot3MauType100BaseLX10currentTwo fiber
1.3.6.1.2.1.26.4.47Identitydot3MauType1000BaseBX10DcurrentOne single-mode fiber OLT
1.3.6.1.2.1.26.4.48Identitydot3MauType1000BaseBX10UcurrentOne single-mode fiber ONU
1.3.6.1.2.1.26.4.49Identitydot3MauType1000BaseLX10currentTwo fiber 10km
1.3.6.1.2.1.26.4.50Identitydot3MauType1000BasePX10DcurrentOne single-mode fiber OMP OLT 10km
1.3.6.1.2.1.26.4.51Identitydot3MauType1000BasePX10UcurrentOne single-mode fiber OMP ONU 10km
1.3.6.1.2.1.26.4.52Identitydot3MauType1000BasePX20DcurrentOne single-mode fiber OMP OLT 20km
1.3.6.1.2.1.26.4.53Identitydot3MauType1000BasePX20UcurrentOne single-mode fiber OMP ONU 20km
1.3.6.1.2.1.26.7IdentityianaMauTCThis MIB module defines dot3MauType OBJECT-IDENTITIES and IANAifMauListBits and JackType Textual Conventions, specifying enumerated values of the ifMauTypeList…
Type Definitions
NameSyntaxStatusDescription
IANAifMauTypeListBitsBITS { bOther(0), bAUI(1), b10base5(2), bFoirl(3), b10base2(4), b10baseT(5), b10baseFP(6), b10baseFB(7), b10baseFL(8), b10broad36(9), b10baseTHD(10), b10baseTFD(11), b10baseFLHD(12), b10baseFLFD(13), b100baseT4(14), b100baseTXHD(15), b100baseTXFD(16), b100baseFXHD(17), b100baseFXFD(18), b100baseT2HD(19), b100baseT2FD(20), b1000baseXHD(21), b1000baseXFD(22), b1000baseLXHD(23), b1000baseLXFD(24), b1000baseSXHD(25), b1000baseSXFD(26), b1000baseCXHD(27), b1000baseCXFD(28), b1000baseTHD(29), b1000baseTFD(30), b10GbaseX(31), b10GbaseLX4(32), b10GbaseR(33), b10GbaseER(34), b10GbaseLR(35), b10GbaseSR(36), b10GbaseW(37), b10GbaseEW(38), b10GbaseLW(39), b10GbaseSW(40), b10GbaseCX4(41), b2BaseTL(42), b10PassTS(43), b100BaseBX10D(44), b100BaseBX10U(45), b100BaseLX10(46), b1000BaseBX10D(47), b1000BaseBX10U(48), b1000BaseLX10(49), b1000BasePX10D(50), b1000BasePX10U(51), b1000BasePX20D(52), b1000BasePX20U(53) }currentThis data type is used as the syntax of the ifMauTypeListBits object in the (updated) definition of MAU-MIB's ifMauTable. The definition of this textual convention with the addition of newly assigned values is published…
JackTypeINTEGER { other(1), rj45(2), rj45S(3), db9(4), bnc(5), fAUI(6), mAUI(7), fiberSC(8), fiberMIC(9), fiberST(10), telco(11), mtrj(12), hssdc(13), fiberLC(14), cx4(15) }currentCommon enumeration values for repeater and interface MAU jack types. This data type is used as the syntax of the ifJackType and rpJackType objects in the (updated) definition of MAU-MIB's ifJackTable and RpJackTable res…