IDS0-MIB
43 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429 | Nodeusr | |||
| 1.3.6.1.4.1.429.1 | Nodenas | |||
| 1.3.6.1.4.1.429.1.16 | Nodeids0 | |||
| 1.3.6.1.4.1.429.1.16.1 | Tableids0CfgTable | not-accessible | mandatory | A table of operator definable parameters for each DS0 |
| 1.3.6.1.4.1.429.1.16.1.1 | Rowids0CfgEntry | not-accessible | mandatory | There is one DS0 Configure entry for each DS0 timeslot in the chassis |
| 1.3.6.1.4.1.429.1.16.1.1.1 | Columnids0CfgDs1Index | read-only | mandatory | The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0CfgDs1Index matches the value of the index for the corresp… |
| 1.3.6.1.4.1.429.1.16.1.1.2 | Columnids0CfgDs0Index | read-only | mandatory | The index value which uniquely identifies the timeslot of the CSU to which this entry refers. |
| 1.3.6.1.4.1.429.1.16.1.1.3 | Columnids0CfgDs0Id | read-write | mandatory | An operator definable string useful for easy identification of a DS0 relative to the user application. |
| 1.3.6.1.4.1.429.1.16.1.1.4 | Columnids0CfgBlockCallType | read-write | mandatory | An oject that defines the type of calls to be blocked by the specified DS0. A value of blockAll(5) results in all calls to this DS0 being blocked. Default = bl… |
| 1.3.6.1.4.1.429.1.16.1.1.5 | Columnids0CfgDs0AssignedSlot | read-write | mandatory | Defines which slot (1 thru 16) the specified DS0 is restricted to connect with. A value of 17 indicates that this DS0 is not restricted. If a value of 0 is ret… |
| 1.3.6.1.4.1.429.1.16.1.1.6 | Columnids0CfgDs0AssignedChannel | read-write | mandatory | Defines which channel of a modem the specified DS0 is restricted to connect with. A value of 33 indicates that this DS0 is not restricted. If a value of 0 is r… |
| 1.3.6.1.4.1.429.1.16.1.1.7 | Columnids0CfgDs0SrvcState | read-write | mandatory | Defines the service state of a specified DS0. This object does not apply to Rob Bit T1 operation. Default = inService(2). |
| 1.3.6.1.4.1.429.1.16.1.1.8 | Columnids0CfgNailUpDs0 | read-write | mandatory | This will put a DS0 in either a normal or a Transparent mode. Normal Mode : This is a normal ds0. Transparent Mode : This provides clear ds0 channels to pass d… |
| 1.3.6.1.4.1.429.1.16.2 | Tableids0StatTable | not-accessible | mandatory | USR's DS0 Status table contains various timeslot status information. |
| 1.3.6.1.4.1.429.1.16.2.1 | Rowids0StatEntry | not-accessible | mandatory | There is one entry in the DS0 Status table for each timeslot in the chassis. |
| 1.3.6.1.4.1.429.1.16.2.1.1 | Columnids0StatDs1Index | read-only | mandatory | The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0StatDs1Index matches the value of the index for the coresp… |
| 1.3.6.1.4.1.429.1.16.2.1.2 | Columnids0StatDs0Index | read-only | mandatory | The index value which uniquely identifies the timeslot of the CSU to which this entry refers. The value of ds0StatDs0Index matches the value of the index for t… |
| 1.3.6.1.4.1.429.1.16.2.1.3 | Columnids0StatDs0 | read-only | mandatory | This object indicates the current status of the specified timeslot. The status values change dynamically with system operation. |
| 1.3.6.1.4.1.429.1.16.2.1.4 | Columnids0StatDevConnTo | read-only | mandatory | This object indicates the device currently connected. |
| 1.3.6.1.4.1.429.1.16.2.1.5 | Columnids0StatSlotConnTo | read-only | mandatory | This object indicates the slot of the device currently connected. Range = 0(none)-16. |
| 1.3.6.1.4.1.429.1.16.2.1.6 | Columnids0StatChanConnTo | read-only | mandatory | This object indicates the channel of the device currently connected. Default 255. |
| 1.3.6.1.4.1.429.1.16.2.1.7 | Columnids0StatDs0SrvcState | read-only | mandatory | This is the current service state of a DS0. This object does not apply to Rob Bit T1 operation. |
| 1.3.6.1.4.1.429.1.16.2.1.8 | Columnids0StatCallArrivalTime | not-accessible | mandatory | This object indicates the call arrival time in GMT w/1 sec resolution. |
| 1.3.6.1.4.1.429.1.16.2.1.9 | Columnids0StatCallConnectTime | not-accessible | mandatory | This object indicates the call connect time in GMT w/1 sec resolution. |
| 1.3.6.1.4.1.429.1.16.2.1.10 | Columnids0StatCallTerminateTime | not-accessible | mandatory | This object indicates the call terminate time in GMT w/1 sec resolution. |
| 1.3.6.1.4.1.429.1.16.2.1.11 | Columnids0StatCallType | not-accessible | mandatory | This object indicates the call type (analog or digital). |
| 1.3.6.1.4.1.429.1.16.2.1.12 | Columnids0StatCallBlockState | read-only | mandatory | This object indicates current ids0 call block status. |
| 1.3.6.1.4.1.429.1.16.2.1.13 | Columnids0StatCallDirn | not-accessible | mandatory | This object indicates the call dirn (in or out bound). |
| 1.3.6.1.4.1.429.1.16.3 | Tableids0CmdTable | not-accessible | mandatory | The DS0 Command table contains an entry for each of the manageable timeslots in the chassis. It provides a means through which to take specific actions on one … |
| 1.3.6.1.4.1.429.1.16.3.1 | Rowids0CmdEntry | not-accessible | mandatory | There is one entry in the DS0 Command table per timeslot in the chassis. |
| 1.3.6.1.4.1.429.1.16.3.1.1 | Columnids0CmdDs1Index | read-only | mandatory | The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0CmdDs1Index matches the value of the index for the corresp… |
| 1.3.6.1.4.1.429.1.16.3.1.2 | Columnids0CmdDs0Index | read-only | mandatory | The index which uniquely identifies the timeslot of the specified CSU to which this entry is applicable. |
| 1.3.6.1.4.1.429.1.16.3.1.3 | Columnids0CmdMgtStationId | read-write | mandatory | This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a com… |
| 1.3.6.1.4.1.429.1.16.3.1.4 | Columnids0CmdReqId | read-only | mandatory | This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command on this DS0 entity. If the request-id i… |
| 1.3.6.1.4.1.429.1.16.3.1.5 | Columnids0CmdFunction | read-write | mandatory | This object contains a value that identifies the command being requested. |
| 1.3.6.1.4.1.429.1.16.3.1.6 | Columnids0CmdForce | read-write | mandatory | In some cases, the DS0 entity may be in a state such that certain commands could adversely affect connections. In such cases, a command request with ds0CmdForc… |
| 1.3.6.1.4.1.429.1.16.3.1.7 | Columnids0CmdParam | read-write | mandatory | This object contains parameters that are specific to the particular command being issued. In some cases, there will be no additional parameters required. |
| 1.3.6.1.4.1.429.1.16.3.1.8 | Columnids0CmdResult | read-only | mandatory | This object contains the result of the most recently requested command, or the value none(1) if no commands have been requested since the last reset. |
| 1.3.6.1.4.1.429.1.16.3.1.9 | Columnids0CmdCode | read-only | mandatory | The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful. |
| 1.3.6.1.4.1.429.1.16.4 | Tableids0BulkAccessTable | not-accessible | mandatory | A table of parameters for each DS0 accessed in a bulk format |
| 1.3.6.1.4.1.429.1.16.4.1 | Rowids0BulkAccessEntry | not-accessible | mandatory | There is one bulk DS0 access for each DS1 in the chassis |
| 1.3.6.1.4.1.429.1.16.4.1.1 | Columnids0BulkAccessDs1Index | read-only | mandatory | The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0BulkAccessDs1Index matches the value of the index for the … |
| 1.3.6.1.4.1.429.1.16.4.1.2 | Columnids0BulkAccessStatDs0Mdm | read-only | mandatory | This object contains all of the ids0Stat table parameters for all the DS0's on the DS1 |