IEC-62439-3-MIB
86 objects
This MIB module defines the Network Management interfaces for the redundancy protocols defined by the IEC 62439 suite. This MIB exposes the IEC62439-3 objects (PRP + HSR)
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.0.62439 | Identityiec62439 | This MIB module defines the Network Management interfaces for the redundancy protocols defined by the IEC 62439 suite. This MIB exposes the IEC62439-3 objects … | ||
| 1.0.62439.1 | Nodemrp | |||
| 1.0.62439.2 | Nodeprp | |||
| 1.0.62439.2.20 | NodelinkRedundancyEntityNotifications | |||
| 1.0.62439.2.21 | NodelinkRedundancyEntityObjects | |||
| 1.0.62439.2.21.0 | NodelreConfiguration | |||
| 1.0.62439.2.21.0.0 | NodelreConfigurationGeneralGroup | |||
| 1.0.62439.2.21.0.0.1 | ScalarlreManufacturerName | read-only | current | specifies the name of the LRE device manufacturer |
| 1.0.62439.2.21.0.0.2 | ScalarlreInterfaceCount | read-only | current | total number of LREs present in this system. |
| 1.0.62439.2.21.0.1 | NodelreConfigurationInterfaceGroup | |||
| 1.0.62439.2.21.0.1.0 | NodelreConfigurationInterfaces | |||
| 1.0.62439.2.21.0.1.0.1 | TablelreInterfaceConfigTable | not-accessible | current | list of PRP/HSR LREs. Each entry corresponds to one PRP/HSR Link Redundancy Entity (LRE), each representing a pair of LAN ports A and B. Basic devices supporti… |
| 1.0.62439.2.21.0.1.0.1.1 | RowlreInterfaceConfigEntry | not-accessible | current | each entry contains management information applicable to a particular LRE. |
| 1.0.62439.2.21.0.1.0.1.1.1 | ColumnlreInterfaceConfigIndex | not-accessible | current | A unique value for each LRE. |
| 1.0.62439.2.21.0.1.0.1.1.2 | ColumnlreRowStatus | read-create | current | indicates the status of the LRE table entry |
| 1.0.62439.2.21.0.1.0.1.1.3 | ColumnlreNodeType | read-write | current | specifies the operation mode of the LRE:PRP mode 1(1), HSR mode(2) Note: PRP mode 0 is considered deprecated and is not supported by this revision of the MIB |
| 1.0.62439.2.21.0.1.0.1.1.4 | ColumnlreNodeName | read-write | current | specifies this LRE's node name |
| 1.0.62439.2.21.0.1.0.1.1.5 | ColumnlreVersionName | read-only | current | specifies the version of this LRE's software |
| 1.0.62439.2.21.0.1.0.1.1.6 | ColumnlreMacAddress | read-write | current | Specified the MAC address to be used by this LRE, MAC addresses are identical for all ports of a single LRE |
| 1.0.62439.2.21.0.1.0.1.1.7 | ColumnlrePortAdminStateA | read-write | current | Specifies whether the port A shall be active or not Active through administrative action (Default: active). |
| 1.0.62439.2.21.0.1.0.1.1.8 | ColumnlrePortAdminStateB | read-write | current | Specifies whether the port B shall be active or not Active through administrative action (Default: active). |
| 1.0.62439.2.21.0.1.0.1.1.9 | ColumnlreLinkStatusA | read-only | current | shows the actual link status of the LRE's port A |
| 1.0.62439.2.21.0.1.0.1.1.10 | ColumnlreLinkStatusB | read-only | current | shows the actual link status of the LRE's port B |
| 1.0.62439.2.21.0.1.0.1.1.11 | ColumnlreDuplicateDiscard | read-write | current | specifies whether a duplicate discard algorithm is used at reception (Default: discard). |
| 1.0.62439.2.21.0.1.0.1.1.12 | ColumnlreTransparentReception | read-write | current | if removeRCT is configured, the RCT is removed when forwarding to the upper layers, only applicable for PRP LRE (Default: removeRCT). |
| 1.0.62439.2.21.0.1.0.1.1.13 | ColumnlreHsrLREMode | read-write | current | This enumeration is only applicable if the LRE is an HSR bridging node or RedBox. It shows the mode of the HSR LRE: (1) Default mode: The HSR LRE is in mode h … |
| 1.0.62439.2.21.0.1.0.1.1.14 | ColumnlreSwitchingEndNode | read-write | current | This enumeration shows which feature is enabled in this particular LRE: (1): an unspecified non-bridging node, e.g. SRP. (2): an unspecified bridging node, e.g… |
| 1.0.62439.2.21.0.1.0.1.1.15 | ColumnlreRedBoxIdentity | read-write | current | Applicable to RedBox HSR-PRP A and RedBox HSR-PRP B. One ID is used by one pair of RedBoxes (one configured to A and one configured to B) coupling an HSR ring … |
| 1.0.62439.2.21.0.1.0.1.1.16 | ColumnlreEvaluateSupervision | read-write | current | True if the LRE evaluates received supervision frames. False if it drops the supervision frames without evaluating. Note: LREs are required to send supervision… |
| 1.0.62439.2.21.0.1.0.1.1.17 | ColumnlreNodesTableClear | read-write | current | specifies that the Node Table is to be cleared |
| 1.0.62439.2.21.0.1.0.1.1.18 | ColumnlreProxyNodeTableClear | read-write | current | specifies that the Proxy Node Table is to be cleared |
| 1.0.62439.2.21.0.1.0.1.1.19 | ColumnlreDupListResideMaxTime | read-write | current | the longest time an entry may reside in the duplicates list, expressed as the number of seconds multiplied by 65536; the default value is 26214 x 15 us, or 400… |
| 1.0.62439.2.21.1 | NodelreStatistics | |||
| 1.0.62439.2.21.1.1 | NodelreStatisticsInterfaceGroup | |||
| 1.0.62439.2.21.1.1.0 | NodelreStatisticsInterfaces | |||
| 1.0.62439.2.21.1.1.0.1 | TablelreInterfaceStatsTable | not-accessible | current | list of PRP/HSR LREs. Each entry corresponds to one PRP/HSR Link Redundancy Entity (LRE), each representing a pair of LAN ports A and B and a port C towards th… |
| 1.0.62439.2.21.1.1.0.1.1 | RowlreInterfaceStatsEntry | not-accessible | current | An entry containing management information applicable to a particular LRE. |
| 1.0.62439.2.21.1.1.0.1.1.1 | ColumnlreInterfaceStatsIndex | not-accessible | current | A unique value for each LRE. |
| 1.0.62439.2.21.1.1.0.1.1.2 | ColumnlreCntTxA | read-only | current | number of frames sent over port A that are HSR tagged or fitted with a PRP Redundancy Control Trailer. Only frames that are HSR tagged or do have a PRP RCT are… |
| 1.0.62439.2.21.1.1.0.1.1.3 | ColumnlreCntTxB | read-only | current | number of frames sent over port B that are HSR tagged or fitted with a PRP Redundancy Control Trailer. Only frames that are HSR tagged or do have a PRP RCT are… |
| 1.0.62439.2.21.1.1.0.1.1.4 | ColumnlreCntTxC | read-only | current | number of frames sent towards the application interface of the DANP or DANH or over the interlink of the RedBox. Frames with and without PRP RCT or HSR tag are… |
| 1.0.62439.2.21.1.1.0.1.1.5 | ColumnlreCntErrWrongLanA | read-only | current | number of frames with the wrong LAN identifier received on LRE port A. Initial value = 0. Only applicable to PRP ports. |
| 1.0.62439.2.21.1.1.0.1.1.6 | ColumnlreCntErrWrongLanB | read-only | current | number of frames with the wrong LAN identifier received on LRE port B. Initial value = 0. Only applicable to PRP ports. |
| 1.0.62439.2.21.1.1.0.1.1.7 | ColumnlreCntErrWrongLanC | read-only | current | number of frames with the wrong LAN identifier received on the interlink of a RedBox. Only applicable to HSR RedBoxes in HSR-PRP configuration (hsrredboxprpa a… |
| 1.0.62439.2.21.1.1.0.1.1.8 | ColumnlreCntRxA | read-only | current | number of frames received on a LRE port A. Only frames that are HSR tagged or fitted with a PRP Redundancy Control Trailer are counted. Frames that are not for… |
| 1.0.62439.2.21.1.1.0.1.1.9 | ColumnlreCntRxB | read-only | current | number of frames received on a LRE port B. Only frames that are HSR tagged or fitted with a PRP Redundancy Control Trailer are counted. Frames that are not for… |
| 1.0.62439.2.21.1.1.0.1.1.10 | ColumnlreCntRxC | read-only | current | number of frames received from the application interface of a DANP or DANH or the number of number of frames received on the interlink of a RedBox. Frames with… |
| 1.0.62439.2.21.1.1.0.1.1.11 | ColumnlreCntErrorsA | read-only | current | number of frames with errors received on this LRE port A. Initial value 0. |
| 1.0.62439.2.21.1.1.0.1.1.12 | ColumnlreCntErrorsB | read-only | current | number of frames with errors received on this LRE port B. Initial value = 0. |
| 1.0.62439.2.21.1.1.0.1.1.13 | ColumnlreCntErrorsC | read-only | current | number of frames with errors received on the application interface of a DANP or DANH or on the interlink of a RedBox. Initial value = 0. |
| 1.0.62439.2.21.1.1.0.1.1.14 | ColumnlreCntNodes | read-only | current | number of nodes in the Nodes Table. |
| 1.0.62439.2.21.1.1.0.1.1.15 | ColumnlreCntProxyNodes | read-only | current | number of nodes in the Proxy Node Table. Only applicable to RedBox. Initial value = 0. |
| 1.0.62439.2.21.1.1.0.1.1.16 | ColumnlreCntUniqueA | read-only | current | number of entries in the duplicate detection mechanism on port A for which no duplicate was received. Initial value = 0. |
| 1.0.62439.2.21.1.1.0.1.1.17 | ColumnlreCntUniqueB | read-only | current | number of entries in the duplicate detection mechanism on port B for which no duplicate was received. Initial value = 0. |
| 1.0.62439.2.21.1.1.0.1.1.18 | ColumnlreCntUniqueC | read-only | current | number of entries in the duplicate detection mechanism on the application interface of the DAN or the interlink of the RedBox for which no duplicate was receiv… |
| 1.0.62439.2.21.1.1.0.1.1.19 | ColumnlreCntDuplicateA | read-only | current | number of entries in the duplicate detection mechanism on port A for which one single duplicate was received. Initial value 0. |
| 1.0.62439.2.21.1.1.0.1.1.20 | ColumnlreCntDuplicateB | read-only | current | number of entries in the duplicate detection mechanism on port B for which one single duplicate was received. Initial value 0. |
| 1.0.62439.2.21.1.1.0.1.1.21 | ColumnlreCntDuplicateC | read-only | current | number of entries in the duplicate detection mechanism on the application interface of the DAN or the interlink of the RedBox for which one single duplicate wa… |
| 1.0.62439.2.21.1.1.0.1.1.22 | ColumnlreCntMultiA | read-only | current | number of entries in the duplicate detection mechanism on port A for which more than one duplicate was received. Initial value 0. |
| 1.0.62439.2.21.1.1.0.1.1.23 | ColumnlreCntMultiB | read-only | current | number of entries in the duplicate detection mechanism on port B for which more than one duplicate was received. Initial value 0. |
| 1.0.62439.2.21.1.1.0.1.1.24 | ColumnlreCntMultiC | read-only | current | number of entries in the duplicate detection mechanism on the application interface of the DAN or the interlink of the RedBox for which more than one duplicate… |
| 1.0.62439.2.21.1.1.0.1.1.25 | ColumnlreCntOwnRxA | read-only | current | number of HSR tagged frames received on Port A that originated from this device. Frames originate from this device if the source MAC matches the MAC of the LRE… |
| 1.0.62439.2.21.1.1.0.1.1.26 | ColumnlreCntOwnRxB | read-only | current | number of HSR tagged frames received on Port B that originated from this device. Frames originate from this device if the source MAC matches the MAC of the LRE… |
| 1.0.62439.2.21.1.1.0.2 | TablelreNodesTable | not-accessible | current | The node table (if it exists on that node) contains information about all remote LRE, which advertised themselves through supervision frames |
| 1.0.62439.2.21.1.1.0.2.1 | RowlreNodesEntry | not-accessible | current | Each entry in the node table (if it exists) contains information about a particular remote LRE registered in the node table, which advertised itself through su… |
| 1.0.62439.2.21.1.1.0.2.1.1 | ColumnlreNodesIndex | not-accessible | current | Unique value for each node in the LRE node table. |
| 1.0.62439.2.21.1.1.0.2.1.2 | ColumnlreNodesMacAddress | read-only | current | Each MAC address corresponds to a single Doubly Attached Node |
| 1.0.62439.2.21.1.1.0.2.1.3 | ColumnlreTimeLastSeenA | read-only | current | Time in TimeTicks (1/100s) since the last frame from this remote LRE was received over LAN A. Initialized with a value of 0 upon node registration in the node … |
| 1.0.62439.2.21.1.1.0.2.1.4 | ColumnlreTimeLastSeenB | read-only | current | Time in TimeTicks (1/100s) since the last frame from this remote LRE was received over LAN B. Initialized with a value of 0 upon node registration in the node … |
| 1.0.62439.2.21.1.1.0.2.1.5 | ColumnlreRemNodeType | read-only | current | DAN type, as indicated in the received supervision frame. |
| 1.0.62439.2.21.1.1.0.3 | TablelreProxyNodeTable | not-accessible | current | The proxy node table (if implemented) contains information about all nodes, for which the LRE acts as a connection to the HSR/PRP network. |
| 1.0.62439.2.21.1.1.0.3.1 | RowlreProxyNodeEntry | not-accessible | current | Each entry in the proxy node table contains information about a particular node for which the LRE acts as a connection to the HSR or PRP network. |
| 1.0.62439.2.21.1.1.0.3.1.1 | ColumnlreProxyNodeIndex | not-accessible | current | A unique value for each node in the LRE proxy node table. |
| 1.0.62439.2.21.1.1.0.3.1.2 | ColumnlreProxyNodeMacAddress | read-only | current | Each entry contains information about a particular node for which the LRE acts as a proxy for the HSR PRP network. |
| 1.0.62439.2.22 | NodelinkRedundancyEntityConformance | |||
| 1.0.62439.2.22.1 | NodelinkRedundancyConformance | |||
| 1.0.62439.2.22.1.1 | NodelreGroups | |||
| 1.0.62439.2.22.1.1.1 | GrouplreDefaultGrp | current | Objects in the default group | |
| 1.0.62439.2.22.2 | NodelinkRedundancyCompliances | |||
| 1.0.62439.2.22.2.1 | CompliancelinkRedundancyCompliance | current | Compliance for support by IEC 62439-3 module | |
| 1.0.62439.3 | Nodecrp | |||
| 1.0.62439.4 | Nodebrp | |||
| 1.0.62439.5 | Nodedrp | |||
| 1.0.62439.6 | Noderrp | |||
| 1.0.62439.7 | Nodeptp |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SecondFraction | Integer32 | current | time interval expressed in multiple of 2**-16 = 15,7 microseconds this corresponds to the fraction of seconds in the NTP time representation the minimum time is 0 microseconds, the maximum 18 hours |