IJ8060-MIB
933 objects
No module-level DESCRIPTION found.
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.2.3.9.4.2 | Nodedm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | Nodedevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | Nodedevice-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1 | Nodesettings-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.1 | Scalarenergy-star | read-write | optional | Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2 | Scalarsleep-mode | read-write | optional | Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.22 | Scalardate-display | read-write | optional | Controls front-panel date display format. Additional information: Controls front-panel date display format. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.31 | Scalarmono-color-switching-mode | read-write | optional | This object allows the user to view/change the color/mono switching mode for a device. Additional information: This object allows the user to view/change the c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32 | Nodedevice-configure | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.12 | Scalardevice-configure-printer-parameters | read-write | optional | Allow the printer to be configured as a duplex or simplex printer. There will be a <<hidden>> encoded in this string and decoded by the printer firmware. If th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.43 | Scalardirect-connect-ports-enable | read-write | optional | This object specifies whether all direct connect ports (parallel and USB) are available or ignored. JetDirect, embedded network connectivity, and third party a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.44 | Scalarcontrol-panel-supplies-status-message | read-write | optional | This PML object can be used to enable or disable supplies status messages from being displayed on the control panel. eShow - show the status messages on the co… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.65 | Scalarpower-state | read-write | optional | This object is used to inquire about and to control the 'power state' of the device. The exact meaning of each enumeration may vary from device to device, but … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.68 | Scalarfactory-reset | write-only | optional | writing an integer 0 will do factory reset on system variables, MFP Settings and the .NET database without a reboot. Additional information: nothing beyond old… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.84 | Scalardisplay-long-grain-optimization-warning | read-write | optional | Display or DoNotDisplay the warning message on control panel of long grain optimiation. Additional information: nothing beyond old description |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.89 | Scalarpowersave-enable-type | read-write | optional | ePowerSaveOff - printer stays awake all the time, can only sleep if sleep button is hit. ePowerSaveUseSleepDelay - use sleep delay the old way, sleep schedule … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2 | Nodestatus-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 | Scalaron-off-line | read-write | optional | To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off lin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | Scalarcontinue | write-only | optional | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a continue event to occur before… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | Scalarauto-continue | read-write | optional | Indicates if the device will automatically continue after encountering a continuable error. If AUTO-CONTINUE is set to eOn, the device will automatically gener… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 | Scalarinstall-date | read-write | optional | Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: YYYY is the year. MM is the month (1-12). DD is the day … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.10 | Scalarperm-store-init-occurred | read-only | optional | This object will set the cAllPermDevices bit when a full perm storage initialization occurs (as would be the case for a brand new system or as a result of a po… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.13 | Scalartimestamp | write-only | optional | Sets the printer's current time in (UTC). The format of the string is 'YYYYMMDDHHMMSS'. Where YYYY is the year. MM is the month (1-12) DD is the day of the mon… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 | Scalardate-and-time | read-write | optional | A C structure containing the following fields: typedef struct { ubyte yr; /* year: 0 to 99 */ ubyte mon; /* month: 1 to 12 */ ubyte day; /* day: 1 to 31 */ uby… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.19 | Scalarservice-id | read-write | optional | A read of this object will return the current SERVICE ID value in the printer. The format is 'YYDDD' where: YY = calendar year - 1990 DDD = (calendar month - 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 | Nodedisplay | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1 | Nodedisplay-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1.3 | Scalarshow-address | read-write | optional | If this object is set to eAuto, and the device has an IP address, the IP address of the device will be shown with the READY message. If this object is set to e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.28 | Scalartime-display | read-write | optional | Controls front-panel time display format. Set to eTimeDisplayTwelveHour for AM/PM display. Set to eTimeDisplayTwentyFourHour for military-type display. Additio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 | Scalarjob-input-auto-continue-timeout | read-write | optional | The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example job related continuable error i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 | Scalarjob-input-auto-continue-mode | read-write | optional | Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. The device POS should explain w… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37 | Nodebackground-message | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.1 | Nodebackground-message1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.1.1 | Scalarbackground-status-msg-line1-part1 | read-write | optional | The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.2 | Nodebackground-message2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.2.1 | Scalarbackground-status-msg-line2-part1 | read-write | optional | The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.5 | Scalarbackground-status-msg-higher-priority | read-write | optional | The string displayed on the device's front panel in place of the printer's built-in background status string. It would alternate with warning messages and woul… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 | Scalarerror-log-clear | write-only | optional | Setting this object clears all the entries in the error log sub-tree. Additional information: Setting this object removes all errors that have been stored in t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 | Scalarjob-output-auto-continue-timeout | read-write | optional | Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet of media to that output bin. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.42 | Scalarcollated-originals-support | read-only | optional | Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability. cCollatedOriginals - The prin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 | Scalarlocalization-languages-supported | read-only | optional | The list of languages supported by the device. The languages are primarily, but not limited to, two character codes from ISO 639, each separated by a comma cha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 | Scalarlocalization-countries-supported | read-only | optional | The list of countries supported by the device. The countries are primarily, but not limited to, two character codes from ISO 3166, each separated by a comma ch… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.59 | Scalarhost-application-available-memory | read-only | optional | Returns the amount of memory, in bytes, that the device has available for job-related processing or resources. Also known as driver work space (DWS) memory. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.60 | Scalarcontrol-panel-button-press | write-only | optional | Writing this object simulates pressing a button on the control panel. Reading it will return the last key pressed either on the control panel or via PML. The d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.63 | Scalarcontrol-panel-display-contents-change-counter | read-only | optional | A counter which increments whenever the contents of the front panel display changes. This object is implemented as a 32-bit signed integer which rolls over to … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.64 | Scalarcontrol-panel-display-contents-crc | read-only | optional | Reading this object returns a 32-bit Cyclical Redundancy Check (CRC) which represents the current contents of the display. Additional information: This object … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65 | Nodecontrol-panel-display | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65.1 | Scalarcontrol-panel-display-graphical-contents | read-only | optional | Reading this object returns a graphical file format image representing the current pixel content of the display. The device POS will specify the expected scree… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.66 | Scalarcontrol-panel-key-press | write-only | optional | Writing this object simulates pressing a key on the control panel. Reading it will return the last key pressed either on the control panel or via PML. This obj… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.99 | Scalarrtc-time-zone | read-write | optional | Controls the time zone, which can be chosen from a list of time zones similar to the one used by Microsoft Windows operating system: eTzDateline -12:00 Interna… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.100 | Scalarautomatic-daylight-savings | read-write | optional | Determines whether or not the automatic adjustment for daylight savings time is enabled. If it's enabled the device local time will be automatically adjusted f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.101 | Scalardaylight-savings-start | read-write | optional | A C structure containing the following fields: typedef struct { ubyte hour; /* hour: 0 to 23 */ ubyte weekday; /* weekday: 0(Sunday) to 6 */ ubyte occurrence; … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.102 | Scalardaylight-savings-end | read-write | optional | A C structure containing the following fields: typedef struct { ubyte hour; /* hour: 0 to 23 */ ubyte weekday; /* weekday: 0(Sunday) to 6 */ ubyte occurrence; … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.103 | Scalardaylight-savings-offset | read-write | optional | Controls the offset in minutes to be added to the time when DST is in effect. Additional information: Controls the offset in minutes to be added to the time wh… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.104 | Scalardaylight-savings-reset | read-write | optional | This object is used to reset (set back to factory default for the current time zone) or read the current status of the DST settings. When Set to eResetToDefaul… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.111 | Scalaremail-service-operational | read-only | optional | To check if Email service is operational on the device. Email is operational if email feature is enabled on the device and the SMTP gateway is configured. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3 | Nodeid | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.1 | Scalarmodel-number | read-only | optional | Identifies the device model number as listed in the HP corporate price list (e.g. C2121A for DeskJet 500C). The string is as specific as possible. Products sho… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.2 | Scalarmodel-name | read-only | optional | Identifies the device model name (e.g. ''DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing should match family naming convent… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.3 | Scalarserial-number | read-only | optional | Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.5 | Scalarfw-rom-datecode | read-only | optional | Identifies the base system firmware date code. The date code will be encoded in the yyyymmdd format. There may be several versions of the base system firmware.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.6 | Scalarfw-rom-revision | read-only | optional | This identifies the system code firmware ROM revision code. The format for a revision is major_revision.minor_revision. There may be other ROM revision code ob… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.10 | Scalardevice-name | read-write | optional | User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.11 | Scalardevice-location | read-write | optional | User defined device location. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as muc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.12 | Scalarasset-number | read-write | optional | User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.20 | Scalarformatter-serial-number | read-only | optional | This object returns the formatter serial number for the device. The value returned from this object is the FORMATTERNUMBER system variable. If possible, encode… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4 | Nodeinterface | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3 | Nodemio | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1 | Nodemio1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.2 | Scalarmio1-model-name | read-only | optional | Returns product information identifying the I/O card. Example: XXXX. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.3 | Scalarmio1-manufacturing-info | read-only | optional | Returns information describing the manufacture of the I/O card installed in MIO/EIO slot 1. May include serial number and firmware revision. Additional informa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.4 | Scalarmio1-type | read-only | optional | Returns an indication of the type of option installed in MIO/EIO slot 1. See SIMM1-TYPE for an explanation of the enumerations. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4 | Nodemio4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.2 | Scalarmio4-model-name | read-only | optional | Returns product information identifying the I/O card. Example: XXXX. Additional information: Returns a string describing the firmware version of the embedded J… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.3 | Scalarmio4-manufacturing-info | read-only | optional | Returns information describing the manufacture of the I/O card installed in MIO/EIO interface 4. May include serial number and firmware revision. Additional in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.4 | Scalarmio4-type | read-only | optional | Returns an indication of the type of option installed in MIO/EIO interface 4. See SIMM1-TYPE for an explanation of the enumerations. Additional information: Re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5 | Nodephd | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1 | Nodephd1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1.9 | Scalarphd1-diagnostics-nvram-data | read-only | optional | The NVRAM Diagnostics information consist of e-serial number, born-on date, manufacturing date, page counter, finisher counter, jam rate history, event log, an… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2 | Nodephd2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.1 | Scalarphd2-model | read-only | optional | Returns product information identifying PHD device 2. Example: XXXX. Additional information: Returns product information identifying the first paper handling d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.2 | Scalarphd2-manufacturing-info | read-only | optional | Returns information describing the manufacture of PHD 2. May include serial number and firmware revision. Additional information: Returns information describin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.3 | Scalarphd2-type | read-only | optional | Returns an indication of the type of option installed in PHD interface 2. See SIMM1-TYPE for an explanation of the enumerations. Additional information: Return… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.4 | Scalarphd2-capacity | read-only | optional | Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional inf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6 | Nodeweb-server | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6.1 | Nodesettings-web-server | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6.1.4 | Scalarweb-proxy-config-enable | read-only | optional | This object is a binary enumeration which the peripheral uses to inform the JetDirect card that the Jet-Direct card embedded web server should display the web … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6.1.5 | Scalarews-request-control-panel-supplies-status | read-write | optional | System variable EWS_REQUEST_CONTROL_PANEL_SUPPPLIES_STATUS requires a PML interface so that WJA can directly access it without needing EWS support for that. Ad… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.8 | Nodeforeign-interface | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.8.2 | Scalarfih-extra-pulses-feature | read-write | optional | This object allows one to get/set the setting of the FIH EXTRA PULSES FEATURE item. This either turns the feature on or off based on customer requirement. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9 | Nodeusb-interface | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.1 | Scalarusb-host-supported | read-only | optional | The USB Host protocol is supported by the device when the value returned is eTrue. The USB Host protocol is not supported when the value returned is eFalse. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2 | Nodeusb | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.1 | Scalarusb-serial-number | read-only | optional | Returns the serial number of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2.0. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.2 | Scalarusb-manufacturer-name | read-only | optional | Returns the description of the manufacturer of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Ve… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.3 | Scalarusb-product-description | read-only | optional | Returns the product description of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2.0. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.4 | Scalarusb-vendor-id | read-only | optional | Returns the Vendor ID of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2.0. The value w… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.5 | Scalarusb-product-id | read-only | optional | Returns the Product ID of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2.0. The value … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.6 | Scalarusb-device-kind | read-only | optional | The USB-DEVICE-KIND object classifies a USB device into one of four broad categories: \ eUSBStorageDevice(1): The USB device is strictly a device for storing d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.7 | Scalarusb-driver-name | read-only | optional | Returns the name of the low-level USB driver supporting this device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6 | Nodejob | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1 | Nodesettings-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.1 | Scalarclearable-warning | read-write | optional | Returns or controls how the device will track clearable warnings. A clearable warning indicates a transient event in the device. The device will continue after… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.2 | Scalarcancel-job | write-only | optional | Cancels the print job whose ID matches the value written to the CANCEL-JOB object. The host first learns the job ID using the CURRENT-JOB-PARSING-ID command. I… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.3 | Scalarjob-info-change-id | read-only | optional | Returns the current value of an object in the job-info sub-tree whose value has changed. Define the object identifier for the object whose value has changed as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.10 | Scalarhold-job-timeout | read-write | optional | The time, in minutes, that the printer will wait before automatically deleting a held job. This allows the printer to automatically clean up jobs that have bee… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2 | Nodeactive-print-jobs | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1 | Nodejob-being-parsed | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1.1 | Scalarcurrent-job-parsing-id | read-only | optional | Contains the printer assigned job identification for the job currently being processed by the processing PDL sub-system. The job ID is a monotonically increasi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5 | Nodejob-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.1 | Scalarjob-info-name1 | read-only | optional | Contains the first part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: The job name is the s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.2 | Scalarjob-info-name2 | read-only | optional | Contains the second part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: See job-info-name1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.10 | Scalarjob-info-stage | read-only | optional | Indicates what printer sub-systems are currently processing this print job. The last OID field for this dynamic object contains the job ID. cSourceSubsystem - … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.11 | Scalarjob-info-io-source | read-only | optional | Indicates which I/O source, the print job was received over. The value maps to port numbering scheme supported in the DEVICE/SOURCE-SUBSYSTEM/IO/PORTS sub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.12 | Scalarjob-info-pages-processed | read-only | optional | Indicates the number of pages processed by the processing subsystem. If neither the cSourceSubsystem or the cProcessingSubsystem items are in the associated JO… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.13 | Scalarjob-info-pages-printed | read-only | optional | Indicates the number of pages printed by the destination subsystem. If none of the cSourceSubsystem, cProcessingSubsystem or cDestinationSubsystem items are in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.14 | Scalarjob-info-size | read-only | optional | Indicates the number of bytes of data processed by the processing subsystem. If neither of the cSourceSubsystem or cProcessingSubsystem items are in the associ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.15 | Scalarjob-info-state | read-only | optional | Indicates the state of the job. The last OID field for this dynamic object contains the job ID. eAborted - the print job was aborted. eWaitingForResources - th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.19 | Scalarjob-info-outcome | read-only | optional | Indicates if any warning or error conditions were encountered while processing the assoicated job. The last OID field for this dynamic object contains the job … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23 | Nodejob-info-attribute | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.1 | Scalarjob-info-attr-1 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. Attribute objects are saved sequentially, starting with 1, after the start of a job. If mor… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.2 | Scalarjob-info-attr-2 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.3 | Scalarjob-info-attr-3 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.4 | Scalarjob-info-attr-4 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.5 | Scalarjob-info-attr-5 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.6 | Scalarjob-info-attr-6 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.7 | Scalarjob-info-attr-7 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.8 | Scalarjob-info-attr-8 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.9 | Scalarjob-info-attr-9 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.10 | Scalarjob-info-attr-10 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.11 | Scalarjob-info-attr-11 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.12 | Scalarjob-info-attr-12 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.13 | Scalarjob-info-attr-13 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.14 | Scalarjob-info-attr-14 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.15 | Scalarjob-info-attr-15 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.16 | Scalarjob-info-attr-16 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28 | Nodejob-info-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.1 | Scalarjob-info-accounting-media-size | read-only | optional | Contains the media size of the printed job. The media size of the first page will decide the media size of the entire job. The return value of this object will… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.2 | Scalarjob-info-accounting-media-type | read-only | optional | Contains the media type of the printed job. The media type of the first page will decide the media type of the entire job. The return value of this object will… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.3 | Scalarjob-info-accounting-finishing-options | read-only | optional | Contains the finishing option used on the printed job. The finishing option specified for the first page will decide the finishing option of the entire job. Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.4 | Scalarjob-info-accounting-media-simplex-count | read-only | optional | Contains the total number of simplex pages printed in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.5 | Scalarjob-info-accounting-media-duplex-count | read-only | optional | Contains the total number of duplex pages printed in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.6 | Scalarjob-info-accounting-grayscale-impression-count | read-only | optional | Contains the total number of monochrome pages printed in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.7 | Scalarjob-info-accounting-color-impression-count | read-only | optional | Contains the total number of color pages printed in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.8 | Scalarjob-info-accounting-black-dots | read-only | optional | Contains the total number of black pixels used in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.9 | Scalarjob-info-accounting-yellow-dots | read-only | optional | Contains the total number of yellow pixels used in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.10 | Scalarjob-info-accounting-cyan-dots | read-only | optional | Contains the total number of cyan pixels used in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.11 | Scalarjob-info-accounting-magenta-dots | read-only | optional | Contains the total number of magenta pixels used in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.14 | Scalarjob-info-accounting-job-type | read-only | optional | Keeps track of what type of job is processed. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28.33 | Scalarjob-info-accounting-fixer-dots | read-only | optional | Contains the total number of fixer pixels used in a particular job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7 | Nodeheld-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1 | Nodeheld-job-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.1 | Scalarheld-job-user-name | read-only | optional | User name that is obtained by the driver through some internal method or from user input. Additional information: The following is a general description for al… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.2 | Scalarheld-job-job-name | read-only | optional | The job name may be generated by the driver or obtained from user input. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.3 | Scalarheld-job-retention | read-only | optional | Indicates the retention classification of the job. The values indicate whether the job is printed immediately or stored. There are 4 options: eHoldOff: The job… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.4 | Scalarheld-job-security | read-only | optional | The variable specifies the security level of the job. eHoldTypePublic: The job does not require a PIN in order to release the job for printing. eHoldTypePrivat… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.5 | Scalarheld-job-quantity | read-only | optional | Number of copies to print. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.6 | Scalarheld-job-pin | read-only | optional | A string that is specified in the job stream and then required to be entered in order to release the job for printing. PIN stands for Personal Identification N… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2 | Nodeheld-job-control | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.1 | Scalarheld-job-print | write-only | optional | Instructs the printer to schedule the specified held job for printing with the specified number of copies. The job-id is used to identify which job to print. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.2 | Scalarheld-job-delete | write-only | optional | Instructs the printer to delete the specified held job from the list. The job-id is used to identify which job to delete. A held job can also be deleted from t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.3 | Scalarheld-job-set-queue-size | read-only | optional | Sets the maximum number of jobs which can be stored in the held job list. Additional information: Sets the size of the temporary job lists queue. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.4 | Scalarheld-job-enable | read-write | optional | Enables or disables Job Retention (Job Hold). The valid values are eDisabled and eEnabled. (Specifying an invalid mode causes an <badValue> error to be returne… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10 | Nodefile-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1 | Nodesettings-file-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.2 | Scalarfile-system-max-open-files | read-only | optional | The number of open files allowed at one time. Opening a file when the maximum number of files are currently open will fail. Additional information: Indicates t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.6 | Scalarfile-system-set-system-partition-writeable | write-only | optional | This object allows the system partition to be written to. It consists of a C structure containing the following fields: typedef struct { ubyte <<hidden>>[8]; u… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.7 | Scalarfile-system-set-system-partition-readonly | write-only | optional | Changes a system partition to be READ-ONLY. The value is the volume number to change. If the volume number specified is NOT a system partition an error is retu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.8 | Scalarfile-system-delete-files | write-only | optional | Setting this object causes the specified filename to be deleted, after first validating that the authentication data is correct for the specified user ID. The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.10 | Scalarfile-system-external-access-capabilities | read-write | optional | This object is used to control access to the file system of the device. It is always readable. It is writable when <<hidden>> is not the empty string, and a su… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.11 | Scalarfile-system-erase-mode | read-write | optional | This object is used to control how file data is handled when files are deleted. It is always readable. It is writable when <<hidden>> is the empty string or wh… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.12 | Scalarfile-system-wipe-disk | read-write | optional | This object is a non-leaf node which will have one leaf node under it for each file system in the printer. The leaf nodes will be in a 1-to-1 correspondence wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.13 | Scalarfile-system-wipe-disk-status | read-only | optional | This object is a non-leaf node which will have one leaf node under it for each file system in the printer. The leaf nodes will be in a 1-to-1 correspondence wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3 | Nodefile-systems | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.2 | Nodefile-system2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.2.6 | Scalarfile-system2-initialize-volume | write-only | optional | Setting this object to eInitializing causes file system 2 to be initialized. Reading this object indicates if the file system is currently being initialized. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.3 | Nodefile-system3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.3.6 | Scalarfile-system3-initialize-volume | write-only | optional | Setting this object to eInitializing causes file system 3 to be initialized. Reading this object indicates if the file system is currently being initialized. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.4 | Nodefile-system4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.4.6 | Scalarfile-system4-initialize-volume | write-only | optional | Setting this object to eInitializing causes file system 4 to be initialized. Reading this object indicates if the file system is currently being initialized. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11 | Nodeerrorlog | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1 | Nodeerror1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.1 | Scalarerror1-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 1 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.2 | Scalarerror1-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.3 | Scalarerror1-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2 | Nodeerror2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.1 | Scalarerror2-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 2 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.2 | Scalarerror2-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.3 | Scalarerror2-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3 | Nodeerror3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.1 | Scalarerror3-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 3 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.2 | Scalarerror3-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.3 | Scalarerror3-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4 | Nodeerror4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.1 | Scalarerror4-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 4 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.2 | Scalarerror4-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.3 | Scalarerror4-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5 | Nodeerror5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.1 | Scalarerror5-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 5 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.2 | Scalarerror5-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.3 | Scalarerror5-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6 | Nodeerror6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.1 | Scalarerror6-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 6 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.2 | Scalarerror6-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.3 | Scalarerror6-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7 | Nodeerror7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.1 | Scalarerror7-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 7 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.2 | Scalarerror7-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.3 | Scalarerror7-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8 | Nodeerror8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.1 | Scalarerror8-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 8 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.2 | Scalarerror8-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.3 | Scalarerror8-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9 | Nodeerror9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.1 | Scalarerror9-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 9 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.2 | Scalarerror9-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.3 | Scalarerror9-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10 | Nodeerror10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.1 | Scalarerror10-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 10 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.2 | Scalarerror10-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.3 | Scalarerror10-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11 | Nodeerror11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.1 | Scalarerror11-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 11 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.2 | Scalarerror11-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.3 | Scalarerror11-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12 | Nodeerror12 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.1 | Scalarerror12-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 12 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.2 | Scalarerror12-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.3 | Scalarerror12-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13 | Nodeerror13 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.1 | Scalarerror13-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 13 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.2 | Scalarerror13-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.3 | Scalarerror13-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14 | Nodeerror14 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.1 | Scalarerror14-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 14 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.2 | Scalarerror14-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.3 | Scalarerror14-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15 | Nodeerror15 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.1 | Scalarerror15-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 15 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.2 | Scalarerror15-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.3 | Scalarerror15-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16 | Nodeerror16 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.1 | Scalarerror16-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 16 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.2 | Scalarerror16-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.3 | Scalarerror16-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17 | Nodeerror17 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.1 | Scalarerror17-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 17 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.2 | Scalarerror17-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.3 | Scalarerror17-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18 | Nodeerror18 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.1 | Scalarerror18-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 18 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.2 | Scalarerror18-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.3 | Scalarerror18-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19 | Nodeerror19 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.1 | Scalarerror19-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 19 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.2 | Scalarerror19-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.3 | Scalarerror19-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20 | Nodeerror20 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.1 | Scalarerror20-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 20 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.2 | Scalarerror20-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.3 | Scalarerror20-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21 | Nodeerror21 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.1 | Scalarerror21-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 21 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.2 | Scalarerror21-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.3 | Scalarerror21-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22 | Nodeerror22 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.1 | Scalarerror22-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 22 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.2 | Scalarerror22-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.3 | Scalarerror22-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23 | Nodeerror23 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.1 | Scalarerror23-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 23 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.2 | Scalarerror23-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.3 | Scalarerror23-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24 | Nodeerror24 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.1 | Scalarerror24-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 24 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.2 | Scalarerror24-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.3 | Scalarerror24-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25 | Nodeerror25 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.1 | Scalarerror25-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 25 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.2 | Scalarerror25-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.3 | Scalarerror25-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26 | Nodeerror26 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.1 | Scalarerror26-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 26 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.2 | Scalarerror26-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.3 | Scalarerror26-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27 | Nodeerror27 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.1 | Scalarerror27-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 27 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.2 | Scalarerror27-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.3 | Scalarerror27-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28 | Nodeerror28 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.1 | Scalarerror28-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 28 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.2 | Scalarerror28-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.3 | Scalarerror28-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29 | Nodeerror29 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.1 | Scalarerror29-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 29 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.2 | Scalarerror29-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.3 | Scalarerror29-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30 | Nodeerror30 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.1 | Scalarerror30-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 30 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.2 | Scalarerror30-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.3 | Scalarerror30-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31 | Nodeerror31 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.1 | Scalarerror31-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 31 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.2 | Scalarerror31-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.3 | Scalarerror31-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32 | Nodeerror32 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.1 | Scalarerror32-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 32 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.2 | Scalarerror32-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.3 | Scalarerror32-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33 | Nodeerror33 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.1 | Scalarerror33-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 33 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.2 | Scalarerror33-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.3 | Scalarerror33-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34 | Nodeerror34 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.1 | Scalarerror34-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 34 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.2 | Scalarerror34-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.3 | Scalarerror34-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35 | Nodeerror35 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.1 | Scalarerror35-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 35 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.2 | Scalarerror35-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.3 | Scalarerror35-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36 | Nodeerror36 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.1 | Scalarerror36-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 36 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.2 | Scalarerror36-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.3 | Scalarerror36-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37 | Nodeerror37 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.1 | Scalarerror37-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 37 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.2 | Scalarerror37-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.3 | Scalarerror37-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38 | Nodeerror38 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.1 | Scalarerror38-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 38 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.2 | Scalarerror38-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.3 | Scalarerror38-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39 | Nodeerror39 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.1 | Scalarerror39-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 39 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.2 | Scalarerror39-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.3 | Scalarerror39-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40 | Nodeerror40 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.1 | Scalarerror40-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 40 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.2 | Scalarerror40-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.3 | Scalarerror40-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41 | Nodeerror41 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.1 | Scalarerror41-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 41 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.2 | Scalarerror41-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.3 | Scalarerror41-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42 | Nodeerror42 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.1 | Scalarerror42-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 42 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.2 | Scalarerror42-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.3 | Scalarerror42-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43 | Nodeerror43 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.1 | Scalarerror43-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 43 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.2 | Scalarerror43-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.3 | Scalarerror43-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44 | Nodeerror44 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.1 | Scalarerror44-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 44 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.2 | Scalarerror44-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.3 | Scalarerror44-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45 | Nodeerror45 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.1 | Scalarerror45-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 45 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.2 | Scalarerror45-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.3 | Scalarerror45-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46 | Nodeerror46 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.1 | Scalarerror46-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 46 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.2 | Scalarerror46-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.3 | Scalarerror46-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47 | Nodeerror47 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.1 | Scalarerror47-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 47 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.2 | Scalarerror47-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.3 | Scalarerror47-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48 | Nodeerror48 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.1 | Scalarerror48-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 48 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.2 | Scalarerror48-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.3 | Scalarerror48-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49 | Nodeerror49 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.1 | Scalarerror49-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 49 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.2 | Scalarerror49-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.3 | Scalarerror49-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50 | Nodeerror50 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.1 | Scalarerror50-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 50 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.2 | Scalarerror50-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.3 | Scalarerror50-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12 | Noderesource-manager | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3 | Nodemass-storage-resources | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3.1 | Scalarmass-storage-resource-change-counter | read-only | optional | A counter which changes when a mass storage based resource has been added or deleted. Additional information: The value of this counter changes each time the M… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3.2 | Scalarmass-storage-resource-changed | write-only | optional | Setting to eTrue causes MASS-STORAGE-RESOURCE-CHANGE-COUNTER to be incremented. Additional information: Returns <noSuchName> status if attempting to access thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13 | Noderemote-procedure-call | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.1 | Nodesettings-rpc | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.1.2 | Scalarrpc-bind-protocol-address | read-only | optional | Array of Berkeley sockets style protocol addresses used to bind RPC to a communications protocol family. Setting an instance of this array object to a zero len… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2 | Nodestatus-rpc | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2.3 | Scalarrpc-bound-protocol-address | read-only | optional | An array of Berkeley sockets style protocol addresses that the NFS service has been bound to successful. The format is that same as the array of RPC-BIND-PROTO… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15 | Nodemass-storage-block-driver | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.1 | Nodesettings-mass-storage-bd | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.1.1 | Scalarram-disk-mode | read-write | optional | Returns or controls RAM disk support. eOFF turns off the RAM disk functionality. eOn turns on the RAM disk functionality and creates a RAM disk whose size is c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.1.2 | Scalarram-disk-size | read-only | optional | Returns or controls the size of the RAM disk. The device POS specifies the minimum memory requirements. The object MAXIMUM-RAM-DISK-MEMORY specifies the maximu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.2 | Nodestatus-mass-storage-bd | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.2.1 | Scalarmaximum-ram-disk-memory | read-only | optional | This object's name is misleading. This object does not return the maximum configurable RAM disk size. Instead, it returns the maximum amount of memory, in byte… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16 | Nodeaccounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1 | Nodeprinter-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1 | Nodeprinted-media-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.1 | Scalarprinted-media-simplex-count | read-only | optional | Total number of simplex pages printed in this media size. Additional information: The 5 usage (simplex/duplex count, simplex/duplex click charge and paper size… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.2 | Scalarprinted-media-simplex-charge | read-write | optional | Charge for each simplex page printed in this media size. Additional information: This is a volatile set of charge values that will always reset to the default … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.3 | Scalarprinted-media-duplex-count | read-only | optional | Total number of duplex pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.4 | Scalarprinted-media-duplex-charge | read-write | optional | Charge for each duplex page printed in this media size. Additional information: The click charges for duplex printed media. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.5 | Scalarprinted-media-total-charge | read-only | optional | The total charge for pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.6 | Scalarprinted-media-maximum-pixels-per-page | read-only | optional | The number of pixels required to completely fill a page of this media size. The device POS will specify the resolution at which this pixel count was calculated… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.7 | Scalarprinted-media-combined-total | read-only | optional | Total number of letter equivalently weighted pages both color and mono combined with this printer. Additional information: The combined total per page size of … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.10 | Scalarprinted-media-dimplex-count | read-only | optional | Total number of mono dimplex pages printed in this media size. A dimplex page is one that has been printed in duplex mode but the back side is blank. Dimplex p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.2 | Scalarusage-printer-total-charge | read-only | optional | Total printer charge for all paper sizes printed. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.4 | Scalarusage-staple-count | read-only | optional | Total number of staples used. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.5 | Scalarusage-instructions-line1 | read-write | optional | The first line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.6 | Scalarusage-instructions-line2 | read-write | optional | The second line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.7 | Scalarusage-instructions-line3 | read-write | optional | The third line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.8 | Scalarusage-instructions-line4 | read-write | optional | The fourth line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.10 | Scalarsource-tray-usage-total | read-only | optional | This object reports the total source tray usage for the life of the printer. This value is reported on the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.11 | Scalardestination-bin-usage-total | read-only | optional | This object reports the total destination bin usage for the life of the printer. This value is reported on the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.12 | Scalarusage-printer-mono-total-charge | read-only | optional | Total printer charge for all paper sizes printed in monochrome only. Additional information: This is the total charge over the range of all supported media siz… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.13 | Scalarusage-printer-color-total-charge | read-only | optional | Total printer charge for all paper sizes printed in color only. Additional information: This is the total charge over the range of all supported media sizes fo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14 | Nodeprint-meter-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.2 | Scalarprint-meter-usage-threshold | read-only | optional | A value indicating the threshold value for this category of pages. The device POS will indicate the units of measure for this threshold value. Additional infor… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.3 | Scalarprint-meter-print-quality | read-only | optional | This enumeration describes the selected print quality for this category of printed pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.4 | Scalarprint-meter-simplex-count | read-only | optional | Total number of simplex pages printed for this category of printed pages. Additional information: The usage (simplex/duplex/dimplex count and charge objects de… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.5 | Scalarprint-meter-duplex-count | read-only | optional | Total number of duplex pages printed for this category of printed pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.6 | Scalarprint-meter-total-charge | read-only | optional | Total number of simplex plus duplex pages printed multiplied by the unit charge for each given media size for this category of printed pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.7 | Scalarprint-meter-dimplex-count | read-only | optional | Total number of dimplex pages printed for this category of printed pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.8 | Scalarprint-meter-simplex-total | read-only | optional | Total number of simplex pages printed for this category of printed pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.9 | Scalarprint-meter-duplex-total | read-only | optional | Total number of duplex pages printed for this category of printed pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.10 | Scalarprint-meter-category-total | read-only | optional | Total number of simplex plus duplex pages printed for this category of printed pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.11 | Scalarprint-meter-dimplex-total | read-only | optional | Total number of dimplex pages printed for this category of printed pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.15 | Scalarusage-printer-mono-simplex-total | read-only | optional | This object reports the total of monochrome simplex pages printed on this device. This value is the sum of all PRINTED-MEDIA-SIMPLEX-COUNT.n counter values. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.16 | Scalarusage-printer-mono-duplex-total | read-only | optional | This object reports the total of monochrome duplex pages printed on this device. This value is the sum of all PRINTED-MEDIA-DUPLEX-COUNT.n counter values. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.17 | Scalarusage-printer-mono-dimplex-total | read-only | optional | This object reports the total of monochrome dimplex pages printed on this device. This value is the sum of all PRINTED-MEDIA-DIMPLEX-COUNT.n counter values. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2 | Nodescanner-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1 | Nodescanned-media-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.1 | Scalarscanned-media-simplex-count | read-only | optional | Total number of simplex pages scanned, for this media size. Additional information: The 5 usage (simplex/duplex count, simplex/duplex click charge and paper si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.2 | Scalarscanned-media-simplex-charge | read-write | optional | Charge for each simplex page printed in this media size. Additional information: This is a volatile set of charge values that will always reset to the default … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.3 | Scalarscanned-media-duplex-count | read-only | optional | Total number of duplex pages scanned, for this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.4 | Scalarscanned-media-duplex-charge | read-write | optional | Charge for each duplex page scanned, for this media size. Additional information: Setting this object has the effect of also altering the corresponding value f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.5 | Scalarscanned-media-total-charge | read-only | optional | The total charge for pages scanned, for this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.2 | Scalarusage-scanner-total-charge | read-only | optional | Total scanner charge or cost for all paper sizes scanned. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3 | Nodeprinter-color-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1 | Nodeprinted-media-color-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.1 | Scalarprinted-media-color-simplex-count | read-only | optional | Total number of color simplex pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.3 | Scalarprinted-media-color-duplex-count | read-only | optional | Total number of color duplex pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.5 | Scalarprinted-media-color-total-count | read-only | optional | The total count for color pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.6 | Scalarprinted-media-color-dimplex-count | read-only | optional | Total number of color dimplex pages printed in this media size. A color dimplex page is a color page that has been printed in duplex mode but the back side is … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.5 | Nodesource-tray-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.5.1 | Nodesource-tray-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.5.1.1 | Scalarsource-tray-usage-count | read-only | optional | Total number of pages printed from this source tray. Additional information: This object will track how many images have been printed with the original source … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.6 | Nodedestination-bin-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.6.1 | Nodedestination-bin-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.6.1.1 | Scalardestination-bin-usage-count | read-only | optional | Total number of pages printed to this destination bin. Additional information: This object will track how many images have been printed with the original desti… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18 | Nodefirmware-download | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.1 | Scalarfirmware-download-write-status-supported | read-only | optional | This object provides information on whether the printer has the ability to communicate the write-status of the firmware download while the download is taking p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.2 | Scalarfirmware-download-write-time | read-only | optional | If the design of the firmware-download implementation does not allow PML interaction during the download process, this value provides an estimation of the time… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.3 | Scalarfirmware-download-write-count | read-only | optional | Tells the number of times that firmware has been downloaded to the flash part. Additional information: Tells the number of times that firmware has been downloa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.4 | Scalarfirmware-download-current-state | read-write | optional | Provides the current or last reportable state of the firmware download process. The current state may not necessarily be the current state, but could be the po… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.5 | Scalarfirmware-download-maximum-write-count | read-only | optional | Reports the manufacturer specified number of times that firmware can be downloaded to the flash part. A value of -1 means that there is no limit. A value of 0 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.6 | Scalarfirmware-download-name | read-only | mandatory | This returns the name of the printer. This should match the name in the header of the upgrade image being sent to the flash part. If the name does not match wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.7 | Scalarfirmware-download-version | read-only | mandatory | This object will return a string value representing the current revision of firmware that the printer is operating with. This is used to determine if code need… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.19 | Nodeoperating-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.19.1 | Scalaros-execute-file | write-only | optional | This object's input is a null-terminated string representing a fully-qualified path name for an executable file. This object causes the file to be executed by … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20 | Nodeupgradable-devices | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.1 | Scalarupgradable-devices-write-status-supported | read-only | optional | This object provides information on whether the upgradable device has the ability to communicate the write-status of the upgrade while the upgrade is taking pl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.2 | Scalarupgradable-devices-write-time | read-only | optional | If the design of the device upgrade implementation does not allow PML interaction during the download process, this value provides an estimation of the time wh… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.3 | Scalarupgradable-devices-write-count | read-only | optional | Tells the number of times that firmware for device X has been downloaded to the flash part. The default value will vary depending on how many times the firmwar… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.4 | Scalarupgradable-devices-current-state | read-only | optional | Provides the current or last reportable state of the device upgrade process. The current state may not necessarily be the current state, but could be the post-… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.5 | Scalarupgradable-devices-max-write-count | read-only | optional | Reports the manufacturer specified number of times that firmware for device X can be downloaded to the flash part. A value of -1 means that there is no limit. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.6 | Scalarupgradable-devices-name | read-only | mandatory | This returns the name of the upgradable device. This should match the name in the header of the upgrade image being sent to the flash part. If the name does no… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.7 | Scalarupgradable-devices-version | read-only | mandatory | This object will return a string value representing the current revision of firmware that device X is operating with. This is used to determine if code needs t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.8 | Scalarremote-upgrade-enable | read-write | mandatory | Enables or disables the ability to upgrade the firmware associated with any device that is available to be upgraded. This will be set to on or off at the RFU l… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22 | Nodewarninglog | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.1 | Nodewarning1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.1.1 | Scalarwarning1-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 1 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.1.2 | Scalarwarning1-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.1.3 | Scalarwarning1-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.2 | Nodewarning2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.2.1 | Scalarwarning2-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 2 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.2.2 | Scalarwarning2-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.2.3 | Scalarwarning2-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.3 | Nodewarning3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.3.1 | Scalarwarning3-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 3 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.3.2 | Scalarwarning3-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.3.3 | Scalarwarning3-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.4 | Nodewarning4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.4.1 | Scalarwarning4-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 4 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.4.2 | Scalarwarning4-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.4.3 | Scalarwarning4-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.5 | Nodewarning5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.5.1 | Scalarwarning5-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 5 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.5.2 | Scalarwarning5-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.5.3 | Scalarwarning5-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.6 | Nodewarning6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.6.1 | Scalarwarning6-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 6 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.6.2 | Scalarwarning6-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.6.3 | Scalarwarning6-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.7 | Nodewarning7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.7.1 | Scalarwarning7-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 7 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.7.2 | Scalarwarning7-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.7.3 | Scalarwarning7-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.8 | Nodewarning8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.8.1 | Scalarwarning8-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 8 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.8.2 | Scalarwarning8-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.8.3 | Scalarwarning8-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.9 | Nodewarning9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.9.1 | Scalarwarning9-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 9 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.9.2 | Scalarwarning9-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.9.3 | Scalarwarning9-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.10 | Nodewarning10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.10.1 | Scalarwarning10-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 10 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.10.2 | Scalarwarning10-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.10.3 | Scalarwarning10-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.11 | Nodewarning11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.11.1 | Scalarwarning11-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 11 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.11.2 | Scalarwarning11-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.11.3 | Scalarwarning11-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.12 | Nodewarning12 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.12.1 | Scalarwarning12-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 12 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.12.2 | Scalarwarning12-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.12.3 | Scalarwarning12-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.13 | Nodewarning13 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.13.1 | Scalarwarning13-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 13 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.13.2 | Scalarwarning13-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.13.3 | Scalarwarning13-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.14 | Nodewarning14 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.14.1 | Scalarwarning14-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 14 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.14.2 | Scalarwarning14-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.14.3 | Scalarwarning14-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.15 | Nodewarning15 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.15.1 | Scalarwarning15-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 15 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.15.2 | Scalarwarning15-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.15.3 | Scalarwarning15-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.16 | Nodewarning16 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.16.1 | Scalarwarning16-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 16 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.16.2 | Scalarwarning16-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.16.3 | Scalarwarning16-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.17 | Nodewarning17 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.17.1 | Scalarwarning17-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 17 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.17.2 | Scalarwarning17-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.17.3 | Scalarwarning17-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.18 | Nodewarning18 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.18.1 | Scalarwarning18-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 18 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.18.2 | Scalarwarning18-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.18.3 | Scalarwarning18-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.19 | Nodewarning19 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.19.1 | Scalarwarning19-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 19 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.19.2 | Scalarwarning19-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.19.3 | Scalarwarning19-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.20 | Nodewarning20 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.20.1 | Scalarwarning20-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 20 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.20.2 | Scalarwarning20-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.20.3 | Scalarwarning20-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.21 | Nodewarning21 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.21.1 | Scalarwarning21-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 21 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.21.2 | Scalarwarning21-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.21.3 | Scalarwarning21-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.22 | Nodewarning22 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.22.1 | Scalarwarning22-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 22 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.22.2 | Scalarwarning22-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.22.3 | Scalarwarning22-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.23 | Nodewarning23 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.23.1 | Scalarwarning23-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 23 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.23.2 | Scalarwarning23-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.23.3 | Scalarwarning23-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.24 | Nodewarning24 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.24.1 | Scalarwarning24-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 24 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.24.2 | Scalarwarning24-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.24.3 | Scalarwarning24-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.25 | Nodewarning25 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.25.1 | Scalarwarning25-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 25 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.25.2 | Scalarwarning25-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.25.3 | Scalarwarning25-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.26 | Nodewarning26 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.26.1 | Scalarwarning26-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 26 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.26.2 | Scalarwarning26-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.26.3 | Scalarwarning26-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.27 | Nodewarning27 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.27.1 | Scalarwarning27-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 27 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.27.2 | Scalarwarning27-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.27.3 | Scalarwarning27-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.28 | Nodewarning28 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.28.1 | Scalarwarning28-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 28 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.28.2 | Scalarwarning28-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.28.3 | Scalarwarning28-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.29 | Nodewarning29 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.29.1 | Scalarwarning29-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 29 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.29.2 | Scalarwarning29-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.29.3 | Scalarwarning29-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.30 | Nodewarning30 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.30.1 | Scalarwarning30-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 30 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.30.2 | Scalarwarning30-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.30.3 | Scalarwarning30-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.31 | Nodewarning31 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.31.1 | Scalarwarning31-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 31 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.31.2 | Scalarwarning31-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.31.3 | Scalarwarning31-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.32 | Nodewarning32 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.32.1 | Scalarwarning32-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 32 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.32.2 | Scalarwarning32-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.32.3 | Scalarwarning32-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.33 | Nodewarning33 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.33.1 | Scalarwarning33-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 33 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.33.2 | Scalarwarning33-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.33.3 | Scalarwarning33-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.34 | Nodewarning34 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.34.1 | Scalarwarning34-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 34 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.34.2 | Scalarwarning34-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.34.3 | Scalarwarning34-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.35 | Nodewarning35 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.35.1 | Scalarwarning35-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 35 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.35.2 | Scalarwarning35-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.35.3 | Scalarwarning35-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.36 | Nodewarning36 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.36.1 | Scalarwarning36-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 36 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.36.2 | Scalarwarning36-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.36.3 | Scalarwarning36-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.37 | Nodewarning37 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.37.1 | Scalarwarning37-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 37 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.37.2 | Scalarwarning37-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.37.3 | Scalarwarning37-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.38 | Nodewarning38 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.38.1 | Scalarwarning38-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 38 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.38.2 | Scalarwarning38-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.38.3 | Scalarwarning38-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.39 | Nodewarning39 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.39.1 | Scalarwarning39-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 39 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.39.2 | Scalarwarning39-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.39.3 | Scalarwarning39-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.40 | Nodewarning40 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.40.1 | Scalarwarning40-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 40 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.40.2 | Scalarwarning40-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.40.3 | Scalarwarning40-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.41 | Nodewarning41 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.41.1 | Scalarwarning41-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 41 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.41.2 | Scalarwarning41-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.41.3 | Scalarwarning41-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.42 | Nodewarning42 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.42.1 | Scalarwarning42-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 42 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.42.2 | Scalarwarning42-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.42.3 | Scalarwarning42-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.43 | Nodewarning43 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.43.1 | Scalarwarning43-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 43 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.43.2 | Scalarwarning43-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.43.3 | Scalarwarning43-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.44 | Nodewarning44 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.44.1 | Scalarwarning44-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 44 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.44.2 | Scalarwarning44-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.44.3 | Scalarwarning44-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.45 | Nodewarning45 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.45.1 | Scalarwarning45-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 45 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.45.2 | Scalarwarning45-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.45.3 | Scalarwarning45-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.46 | Nodewarning46 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.46.1 | Scalarwarning46-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 46 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.46.2 | Scalarwarning46-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.46.3 | Scalarwarning46-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.47 | Nodewarning47 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.47.1 | Scalarwarning47-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 47 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.47.2 | Scalarwarning47-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.47.3 | Scalarwarning47-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.48 | Nodewarning48 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.48.1 | Scalarwarning48-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 48 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.48.2 | Scalarwarning48-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.48.3 | Scalarwarning48-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.49 | Nodewarning49 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.49.1 | Scalarwarning49-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 49 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.49.2 | Scalarwarning49-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.49.3 | Scalarwarning49-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.50 | Nodewarning50 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.50.1 | Scalarwarning50-time-stamp | read-only | optional | Contains some sort of time stamp indicating when warning 50 occurred. Example time stamps include the actual time the warning occurred (in seconds since Jan. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.50.2 | Scalarwarning50-code | read-only | optional | Contains a device specific warning code. Each device POS should list what warnings are logged to the warning log and the meaning of each supported warning code… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.50.3 | Scalarwarning50-date-time | read-only | optional | This item contains the date and the time at which an warning occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 0… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.23 | Nodesecurity | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | Nodesource-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1 | Nodeio | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1 | Nodesettings-io | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.1 | Scalario-timeout | read-write | optional | The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel tha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.2 | Scalario-switch | read-only | optional | Indicates if the device will switch between I/O channels when a job boundary is encountered and print job data is available on another I/O channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3 | Nodeports | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1 | Nodeport1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.4 | Scalarport1-parallel-speed | read-write | optional | Returns or changes the maximum parallel I/O port speed, for port 1. This object is only supported if this port is a parallel port. An eSlow setting causes a 10… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.5 | Scalarport1-parallel-bidirectionality | read-write | optional | Returns or changes whether the parallel I/O port supports bidirectional communication for port 1. This object is only supported if this port is a parallel port… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2 | Nodescanner | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1 | Nodesettings-scanner | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.20 | Scalarscanner-accessory-adf-sheet-count | read-only | optional | Total number of sheets that have been fed through the Automatic Document Feed (ADF) accessory. Additional information: The Automatic Document Feed (ADF) count … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.21 | Scalarscanner-accessory-flatbed-scan-count | read-only | optional | Total number of scans performed by a flatbed scanner accessory. Additional information: The count is only incremented when a sheet is scanned on the FLATBED. T… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.59 | Scalarscanner-accessory-adf-one-sided-sheet-count | read-only | optional | This item is incremented by 1 for each sheet that is scanned through the ADF in 1-sided scan mode. Additional information: The value will be updated at the end… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.60 | Scalarscanner-accessory-adf-two-sided-sheet-count | read-only | optional | This item is incremented by 2 for each sheet that is scanned through the ADF in 2-sided scan mode. Additional information: The value will be updated at the end… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.61 | Scalarscanner-accessory-copy-job-scan-count | read-only | optional | This relates to the number of pages scanned for copying. This item is incremented by 2 for each sheet scanned through the ADF in 2-sided scan mode, and it is i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.62 | Scalarscanner-accessory-send-job-scan-count | read-only | optional | This relates to the number of pages scanned for fax/send. This item is incremented by 2 for each sheet scanned through the ADF in 2-sided scan mode, and it is … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.89 | Scalarscan-to-folder-count | read-only | optional | The number of scan-to-folder scan jobs. Additional information: The number of scan-to-folder scan jobs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.90 | Scalarfax-job-scan-count | read-only | optional | The number of fax scan jobs. Additional information: The number of fax scan jobs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3 | Nodeprocessing-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3 | Nodepdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1 | Nodesettings-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 | Scalardefault-copies | read-write | optional | Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5 | Scalarform-feed | write-only | optional | Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as close page or eject page. If th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 | Scalardefault-vertical-black-resolution | read-write | optional | Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In InkJet changing this OID also ca… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 | Scalardefault-horizontal-black-resolution | read-write | optional | Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In InkJet changing this object al… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10 | Scalardefault-page-protect | read-write | optional | Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raster form of a processed page. If… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 | Scalardefault-lines-per-page | read-write | optional | Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest sup… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 | Scalardefault-vmi | read-write | optional | Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the supported values. An unsupport… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 | Scalardefault-media-size | read-write | optional | This indicates the default media size. A write of an unsupported value causes an <ErrorInvalidOrUnsupported Value>. Complete list of supported media sizes alon… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 | Scalarcold-reset-media-size | read-write | optional | Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22 | Scalardefault-media-name | read-write | optional | Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: Returns or sets the media name that… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 | Scalarreprint | read-write | optional | Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the device will not attempt to reprint… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39 | Scalardefault-bits-per-pixel | read-write | optional | Controls the number of levels used (per pixel) when printing grayscale or color images. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2 | Nodestatus-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2.2 | Scalarform-feed-needed | read-only | optional | Indicates if the PDL processing sub-system has made marks on the current page and the source subsystem has been idle for a device specific amount of time. Addi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3 | Nodepdl-pcl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5 | Scalarpcl-total-page-count | read-only | optional | Total number of PCL pages printed by the device. Additional information: In InkJet the PCL page count is kept in NVRAM, and the NVRAM value is updated at least… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.14 | Scalarpcl-default-font-source | read-write | optional | Returns or changes the value of the default font source variable in NVRAM. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.15 | Scalarpcl-default-font-number | read-write | optional | Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an <badValue>. Additiona… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4 | Nodepdl-postscript | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.5 | Scalarpostscript-total-page-count | read-only | optional | Total number of PostScript pages printed by the device. Additional information: This object is only supported if the PostScript option is installed. In InkJet … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.11 | Scalarpostscript-print-errors | read-write | optional | Returns or changes the value of the print PostScript errors setting. If eOn, PostScript prints an error page showing the error encountered and the stack at the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.14 | Scalarpostscript-defer-media | read-write | optional | This object will be used to enable or disable the use of the Adobe Postscript Paper Handling Model in the printer firmware. By default it is enabled which mean… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15 | Nodepdl-pdf | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.1 | Scalarpdf-version | read-only | optional | Contains version of PDF that is supported on the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.2 | Scalarpdf-total-page-count | read-only | optional | Total number of PDF pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.3 | Scalarpdf-enabled | read-only | optional | Used to tell whether the device supports PDF. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.4 | Scalarpdf-print-errors | read-write | optional | Returns or changes the value of the print PDF errors setting. If eOn, PDF prints an error page showing the error encountered and the stack at the time of the e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7 | Nodefax-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1 | Nodesettings-fax-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.32 | Scalarfax-print-page-count | read-only | optional | This object tracks the page count for the pages sent to the print engine for fax jobs. In order to write this object <<hidden>> must be set correctly. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2 | Nodestatus-fax-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.13 | Scalarpcfax-send-enabled | read-only | optional | To check if PC Fax Send is enabled on the device. Also used by administrators to enable or disable PC Fax Send on the device |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.14 | Scalarpcfax-send-operational | read-only | optional | To check if a fax can be sent from a PC to the device. This checks if a Fax service is supported on the MFP and if the administrator has enabled PC Fax Send fo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.15 | Scalarfax-notification-available | read-only | optional | To check if the embedded Fax accessory or the Fax Service available on the device supports Notification for Faxes Sent |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.16 | Scalarfax-billing-code-enabled | read-only | optional | To check if Billing Code is enabled on the device for Faxes sent |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.17 | Scalarfax-billing-code-minlength | read-only | optional | The Minimum number of Billing Code digits that has to be specified for Faxes sent from the device. Range: 1 - 16 |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.18 | Scalarfax-billing-code | read-only | optional | The actual Billing Code applicable for Faxes sent from the device |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.9 | Nodewebserver-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.9.1 | Nodesettings-webserver | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.9.1.2 | Scalarweb-server-url | read-write | optional | A Universal Resource Locator (URL) from which the Embedded Web Server can be configured. Any limitation on the size of this URL will be specified in the device… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.9.1.3 | Scalarweb-server-security | read-write | optional | Each collection bit represents a device or Embedded Web Server feature that can be enabled or disabled via this object. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | Nodedestination-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | Nodeprint-engine | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1 | Nodesettings-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.2 | Scalaroverride-media-name | read-write | optional | Sets a string identifying the media name that is to be used in place of the currently requested media. The substitution will continue until another media is se… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.3 | Scalaroverride-media-size | read-write | optional | Sets the media size that is to be used in place of the currently requested media size. Additional information: When a request is received to print on a size an… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.24 | Scalarconfigurable-low-threshold-setting | read-write | optional | This PML object can be used to configure the low threshold for supplies. Additional information: This PML object can be used to configure the Low Threshold for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.27 | Scalarcartridge-out-override-control | write-only | optional | This PML object is used to control Cartridge Out Override feature. Additional information: This object is used for the following purposes: 1. Set MarkEmptyOver… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.28 | Scalarduplex-blank-pages | read-write | optional | When the value of the system variable is set to eDuplexBlankPagesAuto, it means to Smart Duplex in any of the specified conditions. This selection is logically… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.31 | Scalarfinisher-image-rotation | read-write | optional | This PML object will provide the additional image rotation that is applied to a printed job depending on the presence or absence of a finisher device or the va… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2 | Nodestatus-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.5 | Scalartotal-engine-page-count | read-write | optional | Total number of pages printed by the device. POS indicates if the total engine page count is kept in NVRAM, and the maximum supported value before the page cou… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.7 | Scalartotal-color-page-count | read-only | optional | Total number of color pages printed by the device. Additional information: Total number of color pages printed by the device. The valid range of this object is… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.22 | Scalarduplex-page-count | read-only | optional | Total number of sheets of media that have been duplex printed. A sheet is counted if it travels through the duplex page path, regardless of whether or not mark… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.26 | Scalarprint-engine-revision | read-only | optional | Print engine revision string. Additional information: Print engine revision string. The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.37 | Nodeprinter-calibration-dhalf | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.37.1 | Scalarprinter-cal-dhalf-page-count | read-only | optional | Provides the page count when the last DHALF calibration occurred. A '-1' indicates that a calibration of this kind has not taken place yet. This object exists … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.37.2 | Scalarprinter-cal-dhalf-utc | read-only | optional | Provides the time (in UTC - Universal Time Code format) when the last DHALF calibration occurred. This value could be zero if no calibration has taken place or… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.38 | Nodeprinter-calibration-cpr | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.38.1 | Scalarprinter-cal-cpr-page-count | read-only | optional | Provides the page count when last CPR calibration occurred. A '-1' indicates that a calibration of this kind has not taken place yet. This object exists (and i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.38.2 | Scalarprinter-cal-cpr-utc | read-only | optional | Provides the time (in UTC - Universal Time Code format) when the last CPR calibration occurred. This value could be zero if no calibration has taken place or i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3 | Nodeintray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1 | Nodesettings-intray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.2 | Scalarinput-tray-auto-select | read-write | optional | Indicates if the device will automatically try to load media from the next input media tray in the auto-select sequence (defined by each device) when it cannot… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.8 | Scalarcustom-paper-feed-dim | read-write | optional | Sets the printer's custom paper dimension in the feed direction (direction parallel to the direction of paper feeding). The value for this object is specified … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.9 | Scalarcustom-paper-xfeed-dim | read-write | optional | Sets the printer's custom paper dimension in the cross-feed direction (direction ninety degrees relative to the direction of paper feeding). The value for this… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.10 | Scalardefault-custom-paper-dim-unit | read-write | optional | The units of measure used to specify the width and height of the printer's default custom paper size. The unit of measure of eTenThousandthsOfInches is 0.0001 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.11 | Scalardefault-custom-paper-feed-dim | read-write | optional | Sets the printer's default custom paper size dimension in the feed direction (direction parallel to the direction of paper feeding). The value for this object … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.12 | Scalardefault-custom-paper-xfeed-dim | read-write | optional | Sets the printer's default custom paper size dimension in the cross-feed direction (direction ninety degrees relative to the direction of paper feeding). The v… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.14 | Scalarinput-tray-max-media-feed-dim | read-only | optional | The maximum physical media size in the feed direction of this input device expressed in units of measure specified by INPUT- TRAY-MIN-MAX-DIM-UNIT. A value of … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.15 | Scalarinput-tray-max-media-xfeed-dim | read-only | optional | The maximum physical media size across the feed direction of a particular input device expressed in units of measure specified by INPUT-TRAY-MIN-MAX-DIM-UNIT. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.16 | Scalarinput-tray-min-media-feed-dim | read-only | optional | The minimum physical media size in the feed direction of a particular input device expressed in units of measure specified by PrtInputMinMaxDimUnit. A value of… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.17 | Scalarinput-tray-min-media-xfeed-dim | read-only | optional | The minimum physical media size across the feed direction of a particular input device expressed in units of measure specified by PrtInputMinMaxDimUnit. A valu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.19 | Scalartray-prompt | read-write | optional | If this object is set to eDisplay, whenever a paper tray is opened, refilled, and closed in a printer, the end user is prompted with a message 'To change size … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3 | Nodeintrays | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1 | Nodeintray1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.1 | Scalartray1-media-size-loaded | read-write | optional | Returns the media size that is currently configuredconfigured in tray #1. This object can be set to indicate the media size currently loaded, if the printer su… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.12 | Scalartray1-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this input tray. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2 | Nodeintray2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.1 | Scalartray2-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #2. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.12 | Scalartray2-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this input tray. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3 | Nodeintray3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.1 | Scalartray3-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #3. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.12 | Scalartray3-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this input tray. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5 | Nodeintray5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.1 | Scalartray5-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #5. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.12 | Scalartray5-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this input tray. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6 | Nodeintray6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6.1 | Scalartray6-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #5. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6.12 | Scalartray6-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this input tray. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4 | Nodeoutbin | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.1 | Nodesettings-outbin | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.1.4 | Scalaroverflow-bin | read-write | optional | Returns or sets the bin that will be used for additional sheets of media when the current bin is full and printing is allowed to continue. Additional informati… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3 | Nodeoutbins | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1 | Nodeoutbin1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.9 | Scalaroutbin1-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.10 | Scalaroutbin1-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.11 | Scalaroutbin1-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.12 | Scalaroutbin1-error-info | read-only | optional | A device specific description of the last error encountered for output bin 1. Each POS should document the meaning of all supported error information. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.2 | Nodeoutbin2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.2.9 | Scalaroutbin2-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.2.10 | Scalaroutbin2-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.2.11 | Scalaroutbin2-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.2.12 | Scalaroutbin2-error-info | read-only | optional | A device specific description of the last error encountered for output bin 2. Each POS should document the meaning of all supported error information. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3 | Nodeoutbin3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.9 | Scalaroutbin3-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.10 | Scalaroutbin3-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.11 | Scalaroutbin3-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.12 | Scalaroutbin3-error-info | read-only | optional | A device specific description of the last error encountered for output bin 3. Each POS should document the meaning of all supported error information. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4 | Nodeoutbin4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.9 | Scalaroutbin4-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.10 | Scalaroutbin4-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.11 | Scalaroutbin4-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.12 | Scalaroutbin4-error-info | read-only | optional | A device specific description of the last error encountered for output bin 4. Each POS should document the meaning of all supported error information. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5 | Nodeoutbin5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.9 | Scalaroutbin5-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.10 | Scalaroutbin5-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.11 | Scalaroutbin5-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: Provides the number of the Paper Handling Device that c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.12 | Scalaroutbin5-error-info | read-only | optional | A device specific description of the last error encountered for output bin 5. Each POS should document the meaning of all supported error information. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6 | Nodeimaging | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.9 | Scalarprint-quality-level | read-write | optional | Returns or sets the print quality level. This value is used when print jobs do not indicate the desired print quality. Additional information: nothing beyond o… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7 | Nodeph | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.1 | Nodesettings-ph | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.1.1 | Scalartray-disable-use-instead | read-write | optional | If this object is set to eEnabled, the paper mount message that is normally posted('To use another tray....') is turned off thereby disallowing the user to spe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3 | Nodeph-devices | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.2 | Nodeph2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.2.2 | Scalarphd2-device-specific-command | write-only | optional | This object is used to send device-specific data to the paper handling device. The meaning of the device-specific command is dependent on the paper handling de… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8 | Nodeprint-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1 | Nodesettings-print-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1.1 | Scalarmedia-names-available | read-write | optional | The value of this object controls which of the MEDIAx-NAME objects are supported. If a bit is set to zero, then attempting to get or set the corresponding MEDI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1.2 | Scalarnorth-edge-offset | read-write | optional | Returns or sets the number of 300 dpi dots by which the image is shifted. Shift is relative to the leading edge of the medium as the medium flows through the m… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3 | Nodemedia-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1 | Nodemedia1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.1 | Scalarmedia1-name | read-only | optional | Media 1 name. Additional information: The order of these objects is determined by the order of SysOD_MediaTypeEnum. The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.2 | Scalarmedia1-short-name | read-only | optional | Length restricted version of the media name 1. The length restriction is required to allow the media name to be displayed on the device's control panel. The de… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.3 | Scalarmedia1-page-count | read-only | optional | Number of sheets of media 1 that have been printed. The device POS should state whether this value is lost across a power cycle or kept in NVRAM. Additional in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2 | Nodemedia2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.1 | Scalarmedia2-name | read-only | optional | Media 2 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.2 | Scalarmedia2-short-name | read-only | optional | Length restricted version of the media name 2. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.3 | Scalarmedia2-page-count | read-only | optional | Number of sheets of media 2 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3 | Nodemedia3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.1 | Scalarmedia3-name | read-only | optional | Media 3 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.2 | Scalarmedia3-short-name | read-only | optional | Length restricted version of the media name 3. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.3 | Scalarmedia3-page-count | read-only | optional | Number of sheets of media 3 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4 | Nodemedia4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.1 | Scalarmedia4-name | read-only | optional | Media 4 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.2 | Scalarmedia4-short-name | read-only | optional | Length restricted version of the media name 4. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.3 | Scalarmedia4-page-count | read-only | optional | Number of sheets of media 4 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5 | Nodemedia5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.1 | Scalarmedia5-name | read-only | optional | Media 5 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.2 | Scalarmedia5-short-name | read-only | optional | Length restricted version of the media name 5. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.3 | Scalarmedia5-page-count | read-only | optional | Number of sheets of media 5 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6 | Nodemedia6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.1 | Scalarmedia6-name | read-only | optional | Media 6 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.2 | Scalarmedia6-short-name | read-only | optional | Length restricted version of the media name 6. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.3 | Scalarmedia6-page-count | read-only | optional | Number of sheets of media 6 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7 | Nodemedia7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.1 | Scalarmedia7-name | read-only | optional | Media 7 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.2 | Scalarmedia7-short-name | read-only | optional | Length restricted version of the media name 7. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.3 | Scalarmedia7-page-count | read-only | optional | Number of sheets of media 7 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8 | Nodemedia8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.1 | Scalarmedia8-name | read-only | optional | Media 8 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.2 | Scalarmedia8-short-name | read-only | optional | Length restricted version of the media name 8. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.3 | Scalarmedia8-page-count | read-only | optional | Number of sheets of media 8 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9 | Nodemedia9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.1 | Scalarmedia9-name | read-only | optional | Media 9 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.2 | Scalarmedia9-short-name | read-only | optional | Length restricted version of the media name 9. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.3 | Scalarmedia9-page-count | read-only | optional | Number of sheets of media 9 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10 | Nodemedia10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.1 | Scalarmedia10-name | read-only | optional | Media 10 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.2 | Scalarmedia10-short-name | read-only | optional | Length restricted version of the media name 10. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.3 | Scalarmedia10-page-count | read-only | optional | Number of sheets of media 10 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11 | Nodemedia11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.1 | Scalarmedia11-name | read-only | optional | Media 11 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.2 | Scalarmedia11-short-name | read-only | optional | Length restricted version of the media name 11. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.3 | Scalarmedia11-page-count | read-only | optional | Number of sheets of media 11 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12 | Nodemedia12 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.1 | Scalarmedia12-name | read-only | optional | Media 12 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.2 | Scalarmedia12-short-name | read-only | optional | Length restricted version of the media name 12. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.3 | Scalarmedia12-page-count | read-only | optional | Number of sheets of media 12 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13 | Nodemedia13 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.1 | Scalarmedia13-name | read-only | optional | Media 13 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.2 | Scalarmedia13-short-name | read-only | optional | Length restricted version of the media name 13. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.3 | Scalarmedia13-page-count | read-only | optional | Number of sheets of media 13 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14 | Nodemedia14 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.1 | Scalarmedia14-name | read-only | optional | Media 14 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.2 | Scalarmedia14-short-name | read-only | optional | Length restricted version of the media name 14. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.3 | Scalarmedia14-page-count | read-only | optional | Number of sheets of media 14 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15 | Nodemedia15 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.1 | Scalarmedia15-name | read-only | optional | Media 15 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.2 | Scalarmedia15-short-name | read-only | optional | Length restricted version of the media name 15. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.3 | Scalarmedia15-page-count | read-only | optional | Number of sheets of media 15 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16 | Nodemedia16 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.1 | Scalarmedia16-name | read-only | optional | Media 16 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.2 | Scalarmedia16-short-name | read-only | optional | Length restricted version of the media name 16. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.3 | Scalarmedia16-page-count | read-only | optional | Number of sheets of media 16 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17 | Nodemedia17 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.1 | Scalarmedia17-name | read-only | optional | Media 17 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.2 | Scalarmedia17-short-name | read-only | optional | Length restricted version of the media name 17. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.3 | Scalarmedia17-page-count | read-only | optional | Number of sheets of media 17 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18 | Nodemedia18 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.1 | Scalarmedia18-name | read-only | optional | Media 18 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.2 | Scalarmedia18-short-name | read-only | optional | Length restricted version of the media name 18. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.3 | Scalarmedia18-page-count | read-only | optional | Number of sheets of media 18 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19 | Nodemedia19 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.1 | Scalarmedia19-name | read-only | optional | Media 19 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.2 | Scalarmedia19-short-name | read-only | optional | Length restricted version of the media name 19. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.3 | Scalarmedia19-page-count | read-only | optional | Number of sheets of media 19 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5 | Nodemedia-size | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.1 | Scalarmedia-size-count | read-only | optional | The number of impressions printed on sheets of this media size. The device POS should state whether this value is lost across a power cycle or is kept in perma… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.2 | Scalarmedia-size-west-edge-first-side-offset | read-write | optional | Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). The adjustment is for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.3 | Scalarmedia-size-west-edge-second-side-offset | read-write | optional | Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). The adjustment is for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.4 | Scalarmedia-size-west-edge-side-offset-by-tray | read-write | optional | Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). A positive value move… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.7 | Nodemedia-counts | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.7.1 | Scalarnon-assured-oht-page-count | read-only | optional | This is a count of the number of invalid (non-HP Laser Jet) transparencies that have been printed on. This value is incremented every time an invalid OHT is pr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.8 | Nodemedia-types | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.8.1 | Scalarmedia-number-of-type-supported | read-only | optional | Indicates the maximum number of supported media types. Additional information: Indicates the number of supported media type. This also indicates which bit in M… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10 | Nodeconsumables | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1 | Nodeconsumables-1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1 | Nodeconsumable-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.4 | Scalarconsumable-status-capacity-units | read-only | optional | This object is used to report the usage units used by the CONSUMABLE-STATUS-TOTAL-CAPACITY object. Additional information: Defines the units for the total capa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.5 | Scalarconsumable-status-total-capacity | read-only | optional | This object is used to report the total capacity of a new consumable of this type. The PML object CONSUMABLE-STATUS-CAPACITY-UNITS can be used to determine the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.79 | Scalarconsumable-status-expiration-date | read-only | mandatory | Indicates the ink cartridge expiration date in yyyymmdd format. An unknown date is represented by the date 00000000. Additional information: Indicates the ink … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.2 | Scalarconsumable-reorder-url | read-write | optional | This object is used to read and write the URL that can be used to reorder consumables for this device. This URL is set at the factory but can be updated by a r… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5 | Nodeconsumables-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1 | Nodeconsumables-life | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.1 | Scalarconsumable-life-usage-units-remaining | read-only | optional | This object reports the current estimate of the number of usage units that remain before this supply is depleted. An installed supply that cannot report such a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.2 | Scalarconsumable-life-usage-units | read-only | optional | This object reports current usage units in use by the corresponding CONSUMABLE-LIFE-USAGE-UNITS-REMAINING object. Additional information: This object returns t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.3 | Scalarconsumable-life-low-threshold | read-only | optional | This object is used to report and modify a threshold value indicating the point in the life of a consumable or supply at which a transition to a LOW state will… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.7 | Scalarconsumable-current-state | read-only | optional | This PML object returns the current state of the particular consumable. cAuthLevel1 - Consumable is at Authentication Level 1 cAuthLevel2 - Consumable is at Au… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.8 | Nodeconsumable-string | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.8.1 | Scalarconsumable-string-information | read-write | optional | This object is used to read and write the string value that describes the consumable information. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.8.2 | Scalarconsumable-string-information-reset | read-write | optional | This object is used to reset (set back to factory default) or read the current status of the corresponding information string. When Set to eResetToDefault, thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.10 | Scalarconsumable-notification-status | read-write | optional | This object is used to read and write the various status flags supported by this consumable. For gandalf the collection bits supported include: cClient1Reorder… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.11 | Scalarconsumable-pages-printed-with-supply | read-only | optional | This PML object returns the number of pages printed with a cartridge consumable. This PML object returns the value that should be displayed under 'Pages Printe… |
| 1.3.6.1.5.1 | Nodesettings-security | |||
| 1.3.6.1.5.1.1 | Scalarsupports-pjl-user-groups | read-only | optional | Returns eTrue if the device is able to process PJL user group variables. See the PJL Technical Reference for the proper syntax for setting these variables. Bec… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |