IMDM-MIB
30 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429 | Nodeusr | |||
| 1.3.6.1.4.1.429.1 | Nodenas | |||
| 1.3.6.1.4.1.429.1.19 | Nodeimdm | |||
| 1.3.6.1.4.1.429.1.19.1 | NodeimdmCc | |||
| 1.3.6.1.4.1.429.1.19.1.1 | TableimdmCcTable | not-accessible | mandatory | A table containing the call control parameters for each modem in the chassis. |
| 1.3.6.1.4.1.429.1.19.1.1.1 | RowimdmCcEntry | not-accessible | mandatory | Call control parameters for an ISDN modem. These define the sequence of operation related to how a call is negotiated. |
| 1.3.6.1.4.1.429.1.19.1.1.1.1 | ColumnimdmCcIndex | read-only | mandatory | The index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of the index to the entity table in the cha… |
| 1.3.6.1.4.1.429.1.19.1.1.1.2 | ColumnimdmCcRateAdapV110 | read-write | mandatory | This object enables V110 rate adaption corresponds to S register S67 bit 0. Default = enable(2). |
| 1.3.6.1.4.1.429.1.19.1.1.1.3 | ColumnimdmCcFixedNtwkRate | read-write | mandatory | This object sets the fixed network rate. This object correspond to S register S67 bit 1. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.4 | ColumnimdmCcNetworkRate | read-write | mandatory | This object sets the Network rate speed. This object corresponds to the modem S register S67 bit 2. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.5 | ColumnimdmCcBcLinkDly | read-write | mandatory | This object enable a 45 - 65 second link delay. This object corresponds to the S register S67 bit 4. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.6 | ColumnimdmCcAnlgOvrDig | read-write | mandatory | This object is used to set S register S68 bit 0 which, does not allow analog calls over digital data connection. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.7 | ColumnimdmCcAsyncPPP | read-write | mandatory | This object is used to disable/enable async PPP/ sync PPP conversion. This object corresponds to S register S68 bit 2. Default = enable(1). |
| 1.3.6.1.4.1.429.1.19.1.1.1.8 | ColumnimdmCcX75 | read-write | mandatory | This object is used to disable/enable X75. This object corresponds to S register S68 bit 3. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.9 | ColumnimdmCcStarV2 | read-write | mandatory | This object is used to set the data mode of the modem and is equivalent to *V2 = x AT command. Default =1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.10 | ColumnimdmCcStarU1 | read-write | mandatory | This object is used to set the originate HDLC protocols of the modem and is equivalent to *U1 = x AT command. Default =2 |
| 1.3.6.1.4.1.429.1.19.1.1.1.11 | ColumnimdmCcStarU2 | read-write | mandatory | This object is used to set the originate Non-HDLC protocols of the modem and is equivalent to *U2 = x AT command. Default =1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.12 | ColumnimdmCcStarU3 | read-write | mandatory | This object is used to set the originate Analog modem/fax data mode of the modem and is equivalent to *U3 = x AT command. Default =2 |
| 1.3.6.1.4.1.429.1.19.1.1.1.13 | ColumnimdmCcV120 | read-write | mandatory | This Object is used to Enable/Disable V120. This Object corresponds to S register 68 bit 4 default=1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.14 | ColumnimdmCcFrameSize | read-write | mandatory | This Object is used to set the Frame size for X75. Default = 2048 |
| 1.3.6.1.4.1.429.1.19.1.1.1.15 | ColumnimdmCcWindowSize | read-write | mandatory | This Object is used to set the Window Size of X75 default=2 |
| 1.3.6.1.4.1.429.1.19.2 | NodeimdmLi | |||
| 1.3.6.1.4.1.429.1.19.2.1 | TableimdmLiTable | not-accessible | mandatory | A list of configurable Line Interface objects for a modem. The number of table entries is given by modem Number. |
| 1.3.6.1.4.1.429.1.19.2.1.1 | RowimdmLiEntry | not-accessible | mandatory | Objects which define the line interface characteristics for a particular modem. |
| 1.3.6.1.4.1.429.1.19.2.1.1.1 | ColumnimdmLiIndex | read-only | mandatory | Index into the Line Interface table. This index is the value from the chassis mib entity relation table that is applicable for a particular modem. |
| 1.3.6.1.4.1.429.1.19.2.1.1.2 | ColumnimdmLiConnTypeToCo | read-write | optional | This object is used to set the type of switch your telephone company Cental Office is using. This object coressponds with the *M AT modem command. |
| 1.3.6.1.4.1.429.1.19.2.1.1.3 | ColumnimdmLiDN | read-write | optional | This object is to set the Directory Number (DN) that is assigned by the telephone company. This object corresponds to the *P AT modem command. |
| 1.3.6.1.4.1.429.1.19.2.1.1.4 | ColumnimdmLiSPID | read-write | optional | This object is to set the Service Profile ID (SPID) that is assigned by the telephone company. This object corresponds to the *S AT modem command. |
| 1.3.6.1.4.1.429.1.19.2.1.1.5 | ColumnimdmLiTermEndPointID | read-write | optional | This object is to set the Terminal Endpoint ID (TEI) that is assigned by the telephone company. This object corresponds to the *T AT modem command. |
| 1.3.6.1.4.1.429.1.19.2.1.1.6 | ColumnimdmLiProtTypeSw | read-write | optional | This object is to set the Switch Protocol that the telephone company uses. This object corresponds to the *W AT modem command. |